aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--CHANGELOG14
-rw-r--r--MAINTAINERS1
-rw-r--r--MAKEALL9
-rw-r--r--Makefile3
-rw-r--r--board/evb64260/flash.c12
-rw-r--r--board/ixdp425/Makefile46
-rw-r--r--board/ixdp425/config.mk2
-rw-r--r--board/ixdp425/flash.c427
-rw-r--r--board/ixdp425/ixdp425.c76
-rw-r--r--board/ixdp425/u-boot.lds55
-rw-r--r--board/trab/auto_update.c3
-rw-r--r--common/cmd_flash.c5
-rw-r--r--common/hush.c18
-rw-r--r--cpu/ixp/Makefile43
-rw-r--r--cpu/ixp/config.mk30
-rw-r--r--cpu/ixp/cpu.c160
-rw-r--r--cpu/ixp/interrupts.c161
-rw-r--r--cpu/ixp/serial.c125
-rw-r--r--cpu/ixp/start.S527
-rw-r--r--cpu/ixp/timer.c74
-rw-r--r--cpu/mpc5xxx/cpu.c3
-rw-r--r--examples/Makefile7
-rw-r--r--include/asm-arm/arch-ixp/ixp425.h559
-rw-r--r--include/configs/P3G4.h4
-rw-r--r--include/configs/ixdp425.h171
25 files changed, 2519 insertions, 16 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 8e70868ca01..00918a2bb44 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,20 @@
Changes for U-Boot 1.0.0:
======================================================================
+* Make sure HUSH is initialized for running auto-update scripts
+
+* Make 5200 reset command _really_ reset the board, without running
+ any other code after it
+
+* Fix errors with flash erase when range spans across banks
+ that are mapped in reverse order
+
+* Fix flash mapping and display on P3G4 board
+
+* Patch by Kyle Harris, 15 Jul 2003:
+ - add support for Intel IXP425 CPU
+ - add support for IXDP425 eval board
+
* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
for more information
diff --git a/MAINTAINERS b/MAINTAINERS
index e2eb87e08fa..4f209c69772 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -289,6 +289,7 @@ Kyle Harris <kharris@nexus-tech.net>
lubbock xscale
cradle xscale
+ ixdp425 xscale
Gary Jennejohn <gj@denx.de>
diff --git a/MAKEALL b/MAKEALL
index 2e5c19815e4..0fafb3c6cb5 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -133,8 +133,10 @@ LIST_ARM9=" \
LIST_pxa="cradle csb226 innokom lubbock wepep250"
+LIST_ixp="ixdp425"
-LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa}"
+
+LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa} ${LIST_ixp}"
#########################################################################
## MIPS Systems
@@ -178,7 +180,10 @@ build_target() {
for arg in $@
do
case "$arg" in
- 5xx|5xxx|8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|pxa|mips|I486|x86)
+ ppc|5xx|5xxx|8xx|824x|8260|4xx|7xx|74xx| \
+ arm|SA|ARM7|ARM9|pxa|ixp| \
+ mips| \
+ x86|I486)
for target in `eval echo '$LIST_'${arg}`
do
build_target ${target}
diff --git a/Makefile b/Makefile
index 463aeee3382..b75d22d68d9 100644
--- a/Makefile
+++ b/Makefile
@@ -888,6 +888,9 @@ csb226_config : unconfig
innokom_config : unconfig
@./mkconfig $(@:_config=) arm pxa innokom
+ixdp425_config : unconfig
+ @./mkconfig $(@:_config=) arm ixp ixdp425
+
lubbock_config : unconfig
@./mkconfig $(@:_config=) arm pxa lubbock
diff --git a/board/evb64260/flash.c b/board/evb64260/flash.c
index e6cf8eb6b36..bc52c127864 100644
--- a/board/evb64260/flash.c
+++ b/board/evb64260/flash.c
@@ -79,7 +79,11 @@ flash_init (void)
size_b0 = flash_get_size(CFG_BOOT_FLASH_WIDTH, (vu_long *)base,
&flash_info[0]);
- printf("[%ldkB@%lx] ", size_b0/1024, base);
+#ifndef CONFIG_P3G4
+ printf("[");
+ print_size (size_b0, "");
+ printf("@%08lX] ", base);
+#endif
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n",
@@ -90,7 +94,11 @@ flash_init (void)
for(i=1;i<CFG_MAX_FLASH_BANKS;i++) {
unsigned long size = flash_get_size(CFG_EXTRA_FLASH_WIDTH, (vu_long *)base, &flash_info[i]);
- printf("[%ldMB@%lx] ", size>>20, base);
+#ifndef CONFIG_P3G4
+ printf("[");
+ print_size (size, "");
+ printf("@%08lX] ", size>>20, base);
+#endif
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
if(i==1) {
diff --git a/board/ixdp425/Makefile b/board/ixdp425/Makefile
new file mode 100644
index 00000000000..e4282c43a67
--- /dev/null
+++ b/board/ixdp425/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := ixdp425.o flash.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk
new file mode 100644
index 00000000000..6bbb9a828b5
--- /dev/null
+++ b/board/ixdp425/config.mk
@@ -0,0 +1,2 @@
+#TEXT_BASE = 0x00100000
+TEXT_BASE = 0x00f00000
diff --git a/board/ixdp425/flash.c b/board/ixdp425/flash.c
new file mode 100644
index 00000000000..bd3a7055f80
--- /dev/null
+++ b/board/ixdp425/flash.c
@@ -0,0 +1,427 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) x
+#else
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) __swab32(x)
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ int i;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+ break;
+ default:
+ panic ("configured to many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+ &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F128J3A:
+ printf ("28F128J3A\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i], info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+ volatile FPW value;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
+
+ mb ();
+ value = addr[0];
+
+ switch (value) {
+
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ mb ();
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+
+ case (FPW) INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x02000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ } else {
+ printf ("\n");
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ printf ("Erasing sector %2d ... ", sect);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ *addr = (FPW) 0x00500050; /* clear status register */
+ *addr = (FPW) 0x00200020; /* erase setup */
+ *addr = (FPW) 0x00D000D0; /* erase confirm */
+
+ while (((status =
+ *addr) & (FPW) 0x00800080) !=
+ (FPW) 0x00800080) {
+ if (get_timer_masked () >
+ CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = (FPW) 0x00B000B0; /* suspend erase */
+ *addr = (FPW) 0x00FF00FF; /* reset to read mode */
+ rcode = 1;
+ break;
+ }
+ }
+
+ *addr = (FPW) 0x00500050; /* clear status register cmd. */
+ *addr = (FPW) 0x00FF00FF; /* resest to read mode */
+
+ printf (" done\n");
+ }
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel ();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf ("not erased at %08lx (%lx)\n", (ulong) addr,
+ (ulong) * addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ *addr = (FPW) 0x00400040; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
+
+void inline spin_wheel (void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf ("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
new file mode 100644
index 00000000000..22617b371ca
--- /dev/null
+++ b/board/ixdp425/ixdp425.c
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/ixp425.h>
+#include <common.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/* local prototypes */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int
+/**********************************************************/
+board_post_init (void)
+/**********************************************************/
+{
+ return (0);
+}
+
+int
+/**********************************************************/
+board_init (void)
+/**********************************************************/
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number of IXDP */
+ gd->bd->bi_arch_number = 245;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0x00000100;
+
+ return 0;
+}
+
+int
+/**********************************************************/
+dram_init (void)
+/**********************************************************/
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return (0);
+}
diff --git a/board/ixdp425/u-boot.lds b/board/ixdp425/u-boot.lds
new file mode 100644
index 00000000000..23f4bd0b0e4
--- /dev/null
+++ b/board/ixdp425/u-boot.lds
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm", "elf32-bigarm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/ixp/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ armboot_end_data = .;
+
+ . = ALIGN(4);
+ bss_start = .;
+ .bss : { *(.bss) }
+ bss_end = .;
+
+ armboot_end = .;
+}
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index 345d2d47a3c..40a92fd91eb 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -204,6 +204,7 @@ extern int flash_write (uchar *, ulong, ulong);
extern int i2c_write_multiple (uchar, uint, int, void *, int);
extern int i2c_read_multiple (uchar, uint, int, void *, int);
extern block_dev_desc_t *get_dev (char*, int);
+extern int u_boot_hush_start(void);
int
au_check_valid(int idx, long nbytes)
@@ -538,6 +539,8 @@ do_auto_update(void)
aufl_layout[3].start = start;
aufl_layout[3].end = end;
}
+ /* make certain that HUSH is runnable */
+ u_boot_hush_start();
/* make sure that we see CTRL-C and save the old state */
old_ctrlc = disable_ctrlc(0);
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 99d9130c184..430a33e2257 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -164,6 +164,11 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
sect = s_last[bank];
addr_first = (sect == s_end) ? b_end + 1: info->start[sect + 1];
(*s_count) += s_last[bank] - s_first[bank] + 1;
+ } else if (s_last[bank] >= 0) {
+ printf("Error: cannot span across banks when they are"
+ " mapped in reverse order\n");
+ rcode = 1;
+ break;
}
}
diff --git a/common/hush.c b/common/hush.c
index dbb952ddba3..7e8a80deb96 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -313,7 +313,7 @@ struct variables *top_vars = &shell_ver;
#else
static int flag_repeat = 0;
static int do_repeat = 0;
-static struct variables *top_vars ;
+static struct variables *top_vars = NULL ;
#endif /*__U_BOOT__ */
#define B_CHUNK (100)
@@ -3194,13 +3194,15 @@ static void u_boot_hush_reloc(void)
int u_boot_hush_start(void)
{
- top_vars = malloc(sizeof(struct variables));
- top_vars->name = "HUSH_VERSION";
- top_vars->value = "0.01";
- top_vars->next = 0;
- top_vars->flg_export = 0;
- top_vars->flg_read_only = 1;
- u_boot_hush_reloc();
+ if (top_vars == NULL) {
+ top_vars = malloc(sizeof(struct variables));
+ top_vars->name = "HUSH_VERSION";
+ top_vars->value = "0.01";
+ top_vars->next = 0;
+ top_vars->flg_export = 0;
+ top_vars->flg_read_only = 1;
+ u_boot_hush_reloc();
+ }
return 0;
}
diff --git a/cpu/ixp/Makefile b/cpu/ixp/Makefile
new file mode 100644
index 00000000000..41ae6893826
--- /dev/null
+++ b/cpu/ixp/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o
+OBJS = serial.o interrupts.o cpu.o timer.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/ixp/config.mk b/cpu/ixp/config.mk
new file mode 100644
index 00000000000..667adfc25d0
--- /dev/null
+++ b/cpu/ixp/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2002
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+BIG_ENDIAN = y
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+ -mshort-load-bytes -msoft-float -mbig-endian
+
+PLATFORM_CPPFLAGS += -mbig-endian -mapcs-32 -march=armv4 -mtune=strongarm1100
diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c
new file mode 100644
index 00000000000..d12e8bd6c27
--- /dev/null
+++ b/cpu/ixp/cpu.c
@@ -0,0 +1,160 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/arch/ixp425.h>
+
+int cpu_init (void)
+{
+ /*
+ * setup up stack if necessary
+ */
+/*
+
+ FIXME: the stack is _below_ the uboot code!!
+
+#ifdef CONFIG_USE_IRQ
+ IRQ_STACK_START = _armboot_end +
+ CONFIG_STACKSIZE + CONFIG_STACKSIZE_IRQ - 4;
+ FIQ_STACK_START = IRQ_STACK_START + CONFIG_STACKSIZE_FIQ;
+ _armboot_real_end = FIQ_STACK_START + 4;
+#else
+ _armboot_real_end = _armboot_end + CONFIG_STACKSIZE;
+#endif
+*/
+ pci_init();
+ return 0;
+}
+
+int cleanup_before_linux (void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * just disable everything that can disturb booting linux
+ */
+
+ unsigned long i;
+
+ disable_interrupts ();
+
+ /* turn off I-cache */
+ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+ i &= ~0x1000;
+ asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+ /* flush I-cache */
+ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+
+ return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ extern void reset_cpu (ulong addr);
+
+ printf ("reseting ...\n");
+
+ udelay (50000); /* wait 50 ms */
+ disable_interrupts ();
+ reset_cpu (0);
+
+ /*NOTREACHED*/
+ return (0);
+}
+
+/* taken from blob */
+void icache_enable (void)
+{
+ register u32 i;
+
+ /* read control register */
+ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+
+ /* set i-cache */
+ i |= 0x1000;
+
+ /* write back to control register */
+ asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+}
+
+void icache_disable (void)
+{
+ register u32 i;
+
+ /* read control register */
+ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+
+ /* clear i-cache */
+ i &= ~0x1000;
+
+ /* write back to control register */
+ asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+ /* flush i-cache */
+ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+}
+
+int icache_status (void)
+{
+ register u32 i;
+
+ /* read control register */
+ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+
+ /* return bit */
+ return (i & 0x1000);
+}
+
+/* we will never enable dcache, because we have to setup MMU first */
+void dcache_enable (void)
+{
+ return;
+}
+
+void dcache_disable (void)
+{
+ return;
+}
+
+int dcache_status (void)
+{
+ return 0; /* always off */
+}
+
+/* FIXME */
+void pci_init(void)
+{
+ return;
+}
diff --git a/cpu/ixp/interrupts.c b/cpu/ixp/interrupts.c
new file mode 100644
index 00000000000..d73dd936565
--- /dev/null
+++ b/cpu/ixp/interrupts.c
@@ -0,0 +1,161 @@
+/* vi: set ts=8 sw=8 noet: */
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/ixp425.h>
+
+extern void reset_cpu (ulong addr);
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ/FIQ interrupts */
+void enable_interrupts (void)
+{
+#error: interrupts not implemented yet
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+#error: interrupts not implemented yet
+}
+#else
+void enable_interrupts (void)
+{
+ return;
+}
+int disable_interrupts (void)
+{
+ return 0;
+}
+#endif
+
+
+
+void bad_mode (void)
+{
+ panic ("Resetting CPU ...\n");
+ reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+ unsigned long flags;
+ const char *processor_modes[] = {
+ "USER_26", "FIQ_26", "IRQ_26", "SVC_26",
+ "UK4_26", "UK5_26", "UK6_26", "UK7_26",
+ "UK8_26", "UK9_26", "UK10_26", "UK11_26",
+ "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+ "USER_32", "FIQ_32", "IRQ_32", "SVC_32",
+ "UK4_32", "UK5_32", "UK6_32", "ABT_32",
+ "UK8_32", "UK9_32", "UK10_32", "UND_32",
+ "UK12_32", "UK13_32", "UK14_32", "SYS_32"
+ };
+
+ flags = condition_codes (regs);
+
+ printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
+ "sp : %08lx ip : %08lx fp : %08lx\n",
+ instruction_pointer (regs),
+ regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+ printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
+ regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+ printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+ regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+ printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+ regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+ printf ("Flags: %c%c%c%c",
+ flags & CC_N_BIT ? 'N' : 'n',
+ flags & CC_Z_BIT ? 'Z' : 'z',
+ flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+ printf (" IRQs %s FIQs %s Mode %s%s\n",
+ interrupts_enabled (regs) ? "on" : "off",
+ fast_interrupts_enabled (regs) ? "on" : "off",
+ processor_modes[processor_mode (regs)],
+ thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+ printf ("undefined instruction\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+ printf ("software interrupt\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+ printf ("prefetch abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+ printf ("data abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+ printf ("not used\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+ printf ("fast interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+ printf ("interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+
+int interrupt_init (void)
+{
+ /* nothing happens here - we don't setup any IRQs */
+ return (0);
+}
diff --git a/cpu/ixp/serial.c b/cpu/ixp/serial.c
new file mode 100644
index 00000000000..aea0cf86966
--- /dev/null
+++ b/cpu/ixp/serial.c
@@ -0,0 +1,125 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/ixp425.h>
+
+void serial_setbrg (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ unsigned int quot = 0;
+ int uart = CFG_IXP425_CONSOLE;
+
+ if (gd->baudrate == 1200)
+ quot = 192;
+ else if (gd->baudrate == 9600)
+ quot = 96;
+ else if (gd->baudrate == 19200)
+ quot = 48;
+ else if (gd->baudrate == 38400)
+ quot = 24;
+ else if (gd->baudrate == 57600)
+ quot = 16;
+ else if (gd->baudrate == 115200)
+ quot = 8;
+ else
+ hang ();
+
+ IER(uart) = 0; /* Disable for now */
+ FCR(uart) = 0; /* No fifos enabled */
+
+ /* set baud rate */
+ LCR(uart) = LCR_WLS0 | LCR_WLS1 | LCR_DLAB;
+ DLL(uart) = quot & 0xff;
+ DLH(uart) = quot >> 8;
+ LCR(uart) = LCR_WLS0 | LCR_WLS1;
+
+ IER(uart) = IER_UUE;
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+ serial_setbrg ();
+
+ return (0);
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+ /* wait for room in the tx FIFO on UART */
+ while ((LSR(CFG_IXP425_CONSOLE) & LSR_TEMT) == 0);
+
+ THR(CFG_IXP425_CONSOLE) = c;
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc ('\r');
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_tstc (void)
+{
+ return LSR(CFG_IXP425_CONSOLE) & LSR_DR;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+ while (!(LSR(CFG_IXP425_CONSOLE) & LSR_DR));
+
+ return (char) RBR(CFG_IXP425_CONSOLE) & 0xff;
+}
+
+void
+serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S
new file mode 100644
index 00000000000..de33e8b8fe5
--- /dev/null
+++ b/cpu/ixp/start.S
@@ -0,0 +1,527 @@
+/* vi: set ts=8 sw=8 noet: */
+/*
+ * u-boot - Startup Code for XScale IXP
+ *
+ * Copyright (C) 2003 Kyle Harris <kharris@nexus-tech.net>
+ *
+ * Based on startup code example contained in the
+ * Intel IXP4xx Programmer's Guide and past u-boot Start.S
+ * samples.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/ixp425.h>
+
+#define MMU_Control_M 0x001 // Enable MMU
+#define MMU_Control_A 0x002 // Enable address alignment faults
+#define MMU_Control_C 0x004 // Enable cache
+#define MMU_Control_W 0x008 // Enable write-buffer
+#define MMU_Control_P 0x010 // Compatability: 32 bit code
+#define MMU_Control_D 0x020 // Compatability: 32 bit data
+#define MMU_Control_L 0x040 // Compatability:
+#define MMU_Control_B 0x080 // Enable Big-Endian
+#define MMU_Control_S 0x100 // Enable system protection
+#define MMU_Control_R 0x200 // Enable ROM protection
+#define MMU_Control_I 0x1000 // Enable Instruction cache
+#define MMU_Control_X 0x2000 // Set interrupt vectors at 0xFFFF0000
+#define MMU_Control_Init (MMU_Control_P|MMU_Control_D|MMU_Control_L)
+
+
+/*
+ * Macro definitions
+ */
+ // Delay a bit
+ .macro DELAY_FOR cycles, reg0
+ ldr \reg0, =\cycles
+ subs \reg0, \reg0, #1
+ subne pc, pc, #0xc
+ .endm
+
+ // wait for coprocessor write complete
+ .macro CPWAIT reg
+ mrc p15,0,\reg,c2,c0,0
+ mov \reg,\reg
+ sub pc,pc,#4
+ .endm
+
+.globl _start
+_start: b reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction: .word undefined_instruction
+_software_interrupt: .word software_interrupt
+_prefetch_abort: .word prefetch_abort
+_data_abort: .word data_abort
+_not_used: .word not_used
+_irq: .word irq
+_fiq: .word fiq
+
+ .balignl 16,0xdeadbeef
+
+
+/*
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * - relocate armboot to ram
+ * - setup stack
+ * - jump to second stage
+ */
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+ .word _start
+
+/*
+ * Note: _armboot_end_data and _armboot_end are defined
+ * by the (board-dependent) linker script.
+ * _armboot_end_data is the first usable FLASH address after armboot
+ */
+.globl _armboot_end_data
+_armboot_end_data:
+ .word armboot_end_data
+.globl _armboot_end
+_armboot_end:
+ .word armboot_end
+
+/*
+ * This is defined in the board specific linker script
+ */
+.globl _bss_start
+_bss_start:
+ .word bss_start
+
+.globl _bss_end
+_bss_end:
+ .word bss_end
+
+/*
+ * _armboot_real_end is the first usable RAM address behind armboot
+ * and the various stacks
+ */
+.globl _armboot_real_end
+_armboot_real_end:
+ .word 0x0badc0de
+
+/*
+ * We relocate uboot to this address (end of RAM - 128 KiB)
+ */
+.globl _uboot_reloc
+_uboot_reloc:
+ .word TEXT_BASE
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+/****************************************************************************/
+/* */
+/* the actual reset code */
+/* */
+/****************************************************************************/
+
+reset:
+ /* disable mmu, set big-endian */
+ mov r0, #0xf8
+ mcr p15, 0, r0, c1, c0, 0
+ CPWAIT r0
+
+ /* invalidate I & D caches & BTB */
+ mcr p15, 0, r0, c7, c7, 0
+ CPWAIT r0
+
+ /* invalidate I & Data TLB */
+ mcr p15, 0, r0, c8, c7, 0
+ CPWAIT r0
+
+ /* drain write and fill buffers */
+ mcr p15, 0, r0, c7, c10, 4
+ CPWAIT r0
+
+ /* disable write buffer coalescing */
+ mrc p15, 0, r0, c1, c0, 1
+ orr r0, r0, #1
+ mcr p15, 0, r0, c1, c0, 1
+ CPWAIT r0
+
+ /* set EXP CS0 to the optimum timing */
+ ldr r1, =CFG_EXP_CS0
+ ldr r2, =IXP425_EXP_CS0
+ str r1, [r2]
+
+ /* make sure flash is visible at 0 */
+ ldr r2, =IXP425_EXP_CFG0
+ ldr r1, [r2]
+ orr r1, r1, #0x80000000
+ str r1, [r2]
+
+ mov r1, #CFG_SDR_CONFIG
+ ldr r2, =IXP425_SDR_CONFIG
+ str r1, [r2]
+
+ /* disable refresh cycles */
+ mov r1, #0
+ ldr r3, =IXP425_SDR_REFRESH
+ str r1, [r3]
+
+ /* send nop command */
+ mov r1, #3
+ ldr r4, =IXP425_SDR_IR
+ str r1, [r4]
+ DELAY_FOR 0x4000, r0
+
+ /* set SDRAM internal refresh val */
+ ldr r1, =CFG_SDRAM_REFRESH_CNT
+ str r1, [r3]
+ DELAY_FOR 0x4000, r0
+
+ /* send precharge-all command to close all open banks */
+ mov r1, #2
+ str r1, [r4]
+ DELAY_FOR 0x4000, r0
+
+ /* provide 8 auto-refresh cycles */
+ mov r1, #4
+ mov r5, #8
+111: str r1, [r4]
+ DELAY_FOR 0x100, r0
+ subs r5, r5, #1
+ bne 111b
+
+ /* set mode register in sdram */
+ mov r1, #1
+ str r1, [r4]
+ DELAY_FOR 0x4000, r0
+
+ /* send normal operation command */
+ mov r1, #6
+ str r1, [r4]
+ DELAY_FOR 0x4000, r0
+
+ /* copy */
+ mov r0, #0
+ mov r4, r0
+ add r2, r0, #0x40000
+ mov r1, #0x10000000
+ mov r5, r1
+
+ 30:
+ ldr r3, [r0], #4
+ str r3, [r1], #4
+ cmp r0, r2
+ bne 30b
+
+ /* invalidate I & D caches & BTB */
+ mcr p15, 0, r0, c7, c7, 0
+ CPWAIT r0
+
+ /* invalidate I & Data TLB */
+ mcr p15, 0, r0, c8, c7, 0
+ CPWAIT r0
+
+ /* drain write and fill buffers */
+ mcr p15, 0, r0, c7, c10, 4
+ CPWAIT r0
+
+ /* move flash to 0x50000000 */
+ ldr r2, =IXP425_EXP_CFG0
+ ldr r1, [r2]
+ bic r1, r1, #0x80000000
+ str r1, [r2]
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /* invalidate I & Data TLB */
+ mcr p15, 0, r0, c8, c7, 0
+ CPWAIT r0
+
+ /* enable I cache */
+ mrc p15, 0, r0, c1, c0, 0
+ orr r0, r0, #MMU_Control_I
+ mcr p15, 0, r0, c1, c0, 0
+ CPWAIT r0
+
+ mrs r0,cpsr /* set the cpu to SVC32 mode */
+ bic r0,r0,#0x1f /* (superviser mode, M=10011) */
+ orr r0,r0,#0x13
+ msr cpsr,r0
+
+relocate: /* relocate U-Boot to RAM */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ cmp r0, r1 /* don't reloc during debug */
+ beq stack_setup
+
+ ldr r2, _armboot_start
+ ldr r3, _armboot_end
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+
+copy_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble copy_loop
+
+ /* Set up the stack */
+
+stack_setup:
+
+ ldr r0, _uboot_reloc /* upper 128 KiB: relocated uboot */
+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
+ /* FIXME: bdinfo should be here */
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
+clear_bss:
+
+ ldr r0, _bss_start /* find start of bss segment */
+ add r0, r0, #4 /* start at first byte of bss */
+ ldr r1, _bss_end /* stop here */
+ mov r2, #0x00000000 /* clear */
+
+clbss_l:str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ bne clbss_l
+
+
+ ldr pc, _start_armboot
+
+_start_armboot: .word start_armboot
+
+
+
+
+/****************************************************************************/
+/* */
+/* Interrupt handling */
+/* */
+/****************************************************************************/
+
+/* IRQ stack frame */
+
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+
+ /* use bad_save_user_regs for abort/prefetch/undef/swi ... */
+
+ .macro bad_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} /* Calling r0-r12 */
+ add r8, sp, #S_PC
+
+ ldr r2, _armboot_end
+ add r2, r2, #CONFIG_STACKSIZE
+ sub r2, r2, #8
+ ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
+ add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
+
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */
+ mov r0, sp
+ .endm
+
+
+ /* use irq_save_user_regs / irq_restore_user_regs for */
+ /* IRQ/FIQ handling */
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} /* Calling r0-r12 */
+ add r8, sp, #S_PC
+ stmdb r8, {sp, lr}^ /* Calling SP, LR */
+ str lr, [r8, #0] /* Save calling PC */
+ mrs r6, spsr
+ str r6, [r8, #4] /* Save CPSR */
+ str r0, [r8, #8] /* Save OLD_R0 */
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, _armboot_end @ setup our mode stack
+ add r13, r13, #CONFIG_STACKSIZE @ resides at top of normal stack
+ sub r13, r13, #8
+
+ str lr, [r13] @ save caller lr / spsr
+ mrs lr, spsr
+ str lr, [r13, #4]
+
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ msr spsr_c, r13
+ mov lr, pc
+ movs pc, lr
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+
+
+/****************************************************************************/
+/* */
+/* exception handlers */
+/* */
+/****************************************************************************/
+
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ irq_save_user_regs /* someone ought to write a more */
+ bl do_fiq /* effiction fiq_save_user_regs */
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif
+
+/****************************************************************************/
+/* */
+/* Reset function: Use Watchdog to reset */
+/* */
+/****************************************************************************/
+
+ .align 5
+.globl reset_cpu
+
+reset_cpu:
+ ldr r1, =0x482e
+ ldr r2, =IXP425_OSWK
+ str r1, [r2]
+ ldr r1, =0x0fff
+ ldr r2, =IXP425_OSWT
+ str r1, [r2]
+ ldr r1, =0x5
+ ldr r2, =IXP425_OSWE
+ str r1, [r2]
+ b reset_endless
+
+
+reset_endless:
+
+ b reset_endless
diff --git a/cpu/ixp/timer.c b/cpu/ixp/timer.c
new file mode 100644
index 00000000000..baa7e72b7e7
--- /dev/null
+++ b/cpu/ixp/timer.c
@@ -0,0 +1,74 @@
+/* vi: set ts=8 sw=8 noet: */
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/ixp425.h>
+
+void ixp425_udelay(unsigned long usec)
+{
+ /*
+ * This function has a max usec, but since it is called from udelay
+ * we should not have to worry... be happy
+ */
+ unsigned long usecs = CFG_HZ/1000000L & ~IXP425_OST_RELOAD_MASK;
+
+ *IXP425_OSST = IXP425_OSST_TIMER_1_PEND;
+ usecs |= IXP425_OST_ONE_SHOT | IXP425_OST_ENABLE;
+ *IXP425_OSRT1 = usecs;
+ while (!(*IXP425_OSST & IXP425_OSST_TIMER_1_PEND));
+}
+
+void udelay (unsigned long usec)
+{
+ while (usec--) ixp425_udelay(1);
+}
+
+static ulong reload_constant = 0xfffffff0;
+
+void reset_timer_masked (void)
+{
+ ulong reload = reload_constant | IXP425_OST_ONE_SHOT | IXP425_OST_ENABLE;
+
+ *IXP425_OSST = IXP425_OSST_TIMER_1_PEND;
+ *IXP425_OSRT1 = reload;
+}
+
+ulong get_timer_masked (void)
+{
+ /*
+ * Note that it is possible for this to wrap!
+ * In this case we return max.
+ */
+ ulong current = *IXP425_OST1;
+ if (*IXP425_OSST & IXP425_OSST_TIMER_1_PEND)
+ {
+ return reload_constant;
+ }
+ return (reload_constant - current);
+}
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index c481d187df9..7d6c0b67158 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -62,8 +62,9 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
__asm__ __volatile__ ("mtmsr %0"::"r" (msr));
/* Charge the watchdog timer */
- *(vu_long *)(MPC5XXX_GPT0_COUNTER) = 0xf;
+ *(vu_long *)(MPC5XXX_GPT0_COUNTER) = 0x0001000f;
*(vu_long *)(MPC5XXX_GPT0_ENABLE) = 0x9004; /* wden|ce|timer_ms */
+ while(1);
return 1;
diff --git a/examples/Makefile b/examples/Makefile
index 90d26550b03..a353203128e 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -73,6 +73,10 @@ ifeq ($(BOARD),oxc)
SREC += eepro100_eeprom.srec
endif
+ifeq ($(BIG_ENDIAN),y)
+EX_LDFLAGS += -EB
+endif
+
OBJS = $(SREC:.srec=.o)
LIB = libstubs.a
@@ -94,7 +98,8 @@ $(LIB): .depend $(LIBOBJS)
$(AR) crv $@ $(LIBOBJS)
%.srec: %.o $(LIB)
- $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB) \
+ $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
+ -o $(<:.o=) -e $(<:.o=) $< $(LIB) \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
diff --git a/include/asm-arm/arch-ixp/ixp425.h b/include/asm-arm/arch-ixp/ixp425.h
new file mode 100644
index 00000000000..b82b818e23c
--- /dev/null
+++ b/include/asm-arm/arch-ixp/ixp425.h
@@ -0,0 +1,559 @@
+/*
+ * include/asm-arm/arch-ixp425/ixp425.h
+ *
+ * Register definitions for IXP425
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_ARM_IXP425_H_
+#define _ASM_ARM_IXP425_H_
+
+#define BIT(x) (1<<(x))
+
+/* FIXME: Only this does work for u-boot... find out why... [RS] */
+#define UBOOT_REG_FIX 1
+#ifdef UBOOT_REG_FIX
+# undef io_p2v
+# undef __REG
+# ifndef __ASSEMBLY__
+# define io_p2v(PhAdd) (PhAdd)
+# define __REG(x) (*((volatile u32 *)io_p2v(x)))
+# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
+# else
+# define __REG(x) (x)
+# endif
+#endif /* UBOOT_REG_FIX */
+
+/*
+ *
+ * IXP425 Memory map:
+ *
+ * Phy Phy Size Map Size Virt Description
+ * =========================================================================
+ *
+ * 0x00000000 0x10000000 SDRAM 1
+ *
+ * 0x10000000 0x10000000 SDRAM 2
+ *
+ * 0x20000000 0x10000000 SDRAM 3
+ *
+ * 0x30000000 0x10000000 SDRAM 4
+ *
+ * The above four are aliases to the same memory location (0x00000000)
+ *
+ * 0x48000000 0x4000000 PCI Memory
+ *
+ * 0x50000000 0x10000000 Not Mapped EXP BUS
+ *
+ * 0x6000000 0x00004000 0x4000 0xFFFEB000 QMgr
+ *
+ * 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG
+ *
+ * 0xC4000000 0x100 0x1000 0xFFFDE000 EXP CFG
+ *
+ * 0xC8000000 0xC000 0xC000 0xFFFDF000 PERIPHERAL
+ *
+ * 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG
+ */
+
+/*
+ * SDRAM
+ */
+#define IXP425_SDRAM_BASE (0x00000000)
+#define IXP425_SDRAM_BASE_ALT (0x10000000)
+
+
+/*
+ * PCI Configuration space
+ */
+#define IXP425_PCI_CFG_BASE_PHYS (0xC0000000)
+#define IXP425_PCI_CFG_BASE_VIRT (0xFFFD0000)
+#define IXP425_PCI_CFG_REGION_SIZE (0x00001000)
+
+/*
+ * Expansion BUS Configuration registers
+ */
+#define IXP425_EXP_CFG_BASE_PHYS (0xC4000000)
+#define IXP425_EXP_CFG_BASE_VIRT (0xFFFD1000)
+#define IXP425_EXP_CFG_REGION_SIZE (0x00001000)
+
+/*
+ * Peripheral space
+ */
+#define IXP425_PERIPHERAL_BASE_PHYS (0xC8000000)
+#define IXP425_PERIPHERAL_BASE_VIRT (0xFFFD2000)
+#define IXP425_PERIPHERAL_REGION_SIZE (0x0000C000)
+
+/*
+ * SDRAM configuration registers
+ */
+#define IXP425_SDRAM_CFG_BASE_PHYS (0xCC000000)
+
+/*
+ * Q Manager space .. not static mapped
+ */
+#define IXP425_QMGR_BASE_PHYS (0x60000000)
+#define IXP425_QMGR_BASE_VIRT (0xFFFDE000)
+#define IXP425_QMGR_REGION_SIZE (0x00004000)
+
+/*
+ * Expansion BUS
+ *
+ * Expansion Bus 'lives' at either base1 or base 2 depending on the value of
+ * Exp Bus config registers:
+ *
+ * Setting bit 31 of IXP425_EXP_CFG0 puts SDRAM at zero,
+ * and The expansion bus to IXP425_EXP_BUS_BASE2
+ */
+#define IXP425_EXP_BUS_BASE1_PHYS (0x00000000)
+#define IXP425_EXP_BUS_BASE2_PHYS (0x50000000)
+#define IXP425_EXP_BUS_BASE2_VIRT (0xF0000000)
+
+#define IXP425_EXP_BUS_BASE_PHYS IXP425_EXP_BUS_BASE2_PHYS
+#define IXP425_EXP_BUS_BASE_VIRT IXP425_EXP_BUS_BASE2_VIRT
+
+#define IXP425_EXP_BUS_REGION_SIZE (0x08000000)
+#define IXP425_EXP_BUS_CSX_REGION_SIZE (0x01000000)
+
+#define IXP425_EXP_BUS_CS0_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x00000000)
+#define IXP425_EXP_BUS_CS1_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x01000000)
+#define IXP425_EXP_BUS_CS2_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x02000000)
+#define IXP425_EXP_BUS_CS3_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x03000000)
+#define IXP425_EXP_BUS_CS4_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x04000000)
+#define IXP425_EXP_BUS_CS5_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x05000000)
+#define IXP425_EXP_BUS_CS6_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x06000000)
+#define IXP425_EXP_BUS_CS7_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x07000000)
+
+#define IXP425_EXP_BUS_CS0_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x00000000)
+#define IXP425_EXP_BUS_CS1_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x01000000)
+#define IXP425_EXP_BUS_CS2_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x02000000)
+#define IXP425_EXP_BUS_CS3_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x03000000)
+#define IXP425_EXP_BUS_CS4_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x04000000)
+#define IXP425_EXP_BUS_CS5_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x05000000)
+#define IXP425_EXP_BUS_CS6_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x06000000)
+#define IXP425_EXP_BUS_CS7_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x07000000)
+
+#define IXP425_FLASH_WRITABLE (0x2)
+#define IXP425_FLASH_DEFAULT (0xbcd23c40)
+#define IXP425_FLASH_WRITE (0xbcd23c42)
+
+
+#define IXP425_EXP_CS0_OFFSET 0x00
+#define IXP425_EXP_CS1_OFFSET 0x04
+#define IXP425_EXP_CS2_OFFSET 0x08
+#define IXP425_EXP_CS3_OFFSET 0x0C
+#define IXP425_EXP_CS4_OFFSET 0x10
+#define IXP425_EXP_CS5_OFFSET 0x14
+#define IXP425_EXP_CS6_OFFSET 0x18
+#define IXP425_EXP_CS7_OFFSET 0x1C
+#define IXP425_EXP_CFG0_OFFSET 0x20
+#define IXP425_EXP_CFG1_OFFSET 0x24
+#define IXP425_EXP_CFG2_OFFSET 0x28
+#define IXP425_EXP_CFG3_OFFSET 0x2C
+
+/*
+ * Expansion Bus Controller registers.
+ */
+#ifndef __ASSEMBLY__
+#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_VIRT+(x)))
+#else
+#define IXP425_EXP_REG(x) (IXP425_EXP_CFG_BASE_PHYS+(x))
+#endif
+
+#define IXP425_EXP_CS0 IXP425_EXP_REG(IXP425_EXP_CS0_OFFSET)
+#define IXP425_EXP_CS1 IXP425_EXP_REG(IXP425_EXP_CS1_OFFSET)
+#define IXP425_EXP_CS2 IXP425_EXP_REG(IXP425_EXP_CS2_OFFSET)
+#define IXP425_EXP_CS3 IXP425_EXP_REG(IXP425_EXP_CS3_OFFSET)
+#define IXP425_EXP_CS4 IXP425_EXP_REG(IXP425_EXP_CS4_OFFSET)
+#define IXP425_EXP_CS5 IXP425_EXP_REG(IXP425_EXP_CS5_OFFSET)
+#define IXP425_EXP_CS6 IXP425_EXP_REG(IXP425_EXP_CS6_OFFSET)
+#define IXP425_EXP_CS7 IXP425_EXP_REG(IXP425_EXP_CS7_OFFSET)
+
+#define IXP425_EXP_CFG0 IXP425_EXP_REG(IXP425_EXP_CFG0_OFFSET)
+#define IXP425_EXP_CFG1 IXP425_EXP_REG(IXP425_EXP_CFG1_OFFSET)
+#define IXP425_EXP_CFG2 IXP425_EXP_REG(IXP425_EXP_CFG2_OFFSET)
+#define IXP425_EXP_CFG3 IXP425_EXP_REG(IXP425_EXP_CFG3_OFFSET)
+
+/*
+ * SDRAM Controller registers.
+ */
+#define IXP425_SDR_CONFIG_OFFSET 0x00
+#define IXP425_SDR_REFRESH_OFFSET 0x04
+#define IXP425_SDR_IR_OFFSET 0x08
+
+#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x))
+
+#define IXP425_SDR_CONFIG IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET)
+#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
+#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
+
+/*
+ * UART registers
+ */
+#define IXP425_UART1 0
+#define IXP425_UART2 0x1000
+
+#define IXP425_UART_RBR_OFFSET 0x00
+#define IXP425_UART_THR_OFFSET 0x00
+#define IXP425_UART_DLL_OFFSET 0x00
+#define IXP425_UART_IER_OFFSET 0x04
+#define IXP425_UART_DLH_OFFSET 0x04
+#define IXP425_UART_IIR_OFFSET 0x08
+#define IXP425_UART_FCR_OFFSET 0x00
+#define IXP425_UART_LCR_OFFSET 0x0c
+#define IXP425_UART_MCR_OFFSET 0x10
+#define IXP425_UART_LSR_OFFSET 0x14
+#define IXP425_UART_MSR_OFFSET 0x18
+#define IXP425_UART_SPR_OFFSET 0x1c
+#define IXP425_UART_ISR_OFFSET 0x20
+
+#define IXP425_UART_CFG_BASE_PHYS (0xc8000000)
+
+#define RBR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_RBR_OFFSET)
+#define THR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_THR_OFFSET)
+#define DLL(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLL_OFFSET)
+#define IER(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IER_OFFSET)
+#define DLH(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLH_OFFSET)
+#define IIR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IIR_OFFSET)
+#define FCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_FCR_OFFSET)
+#define LCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LCR_OFFSET)
+#define MCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MCR_OFFSET)
+#define LSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LSR_OFFSET)
+#define MSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MSR_OFFSET)
+#define SPR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_SPR_OFFSET)
+#define ISR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_ISR_OFFSET)
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4) */
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+#define IXP425_CONSOLE_UART_BASE_VIRT IXP425_UART1_BASE_VIRT
+#define IXP425_CONSOLE_UART_BASE_PHYS IXP425_UART1_BASE_PHYS
+/*
+ * Peripheral Space Registers
+ */
+#define IXP425_UART1_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP425_UART2_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP425_PMU_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP425_INTC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP425_GPIO_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP425_TIMER_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP425_NPEA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP425_NPEB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP425_NPEC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP425_EthA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP425_EthB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP425_USB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xB000)
+
+#define IXP425_UART1_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP425_UART2_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP425_PMU_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP425_INTC_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP425_GPIO_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP425_TIMER_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP425_NPEA_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x6000)
+#define IXP425_NPEB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x7000)
+#define IXP425_NPEC_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x8000)
+#define IXP425_EthA_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP425_EthB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP425_USB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0xB000)
+
+
+/*
+ * UART Register Definitions , Offsets only as there are 2 UARTS.
+ * IXP425_UART1_BASE , IXP425_UART2_BASE.
+ */
+
+#undef UART_NO_RX_INTERRUPT
+
+#define IXP425_UART_XTAL 14745600
+
+/*
+ * Constants to make it easy to access Interrupt Controller registers
+ */
+#define IXP425_ICPR_OFFSET 0x00 /* Interrupt Status */
+#define IXP425_ICMR_OFFSET 0x04 /* Interrupt Enable */
+#define IXP425_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP425_ICIP_OFFSET 0x0C /* IRQ Status */
+#define IXP425_ICFP_OFFSET 0x10 /* FIQ Status */
+#define IXP425_ICHR_OFFSET 0x14 /* Interrupt Priority */
+#define IXP425_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
+#define IXP425_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
+
+/*
+ * Interrupt Controller Register Definitions.
+ */
+#ifndef __ASSEMBLY__
+#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_VIRT+(x)))
+#else
+#define IXP425_INTC_REG(x) (IXP425_INTC_BASE_PHYS+(x))
+#endif
+
+#define IXP425_ICPR IXP425_INTC_REG(IXP425_ICPR_OFFSET)
+#define IXP425_ICMR IXP425_INTC_REG(IXP425_ICMR_OFFSET)
+#define IXP425_ICLR IXP425_INTC_REG(IXP425_ICLR_OFFSET)
+#define IXP425_ICIP IXP425_INTC_REG(IXP425_ICIP_OFFSET)
+#define IXP425_ICFP IXP425_INTC_REG(IXP425_ICFP_OFFSET)
+#define IXP425_ICHR IXP425_INTC_REG(IXP425_ICHR_OFFSET)
+#define IXP425_ICIH IXP425_INTC_REG(IXP425_ICIH_OFFSET)
+#define IXP425_ICFH IXP425_INTC_REG(IXP425_ICFH_OFFSET)
+
+/*
+ * Constants to make it easy to access GPIO registers
+ */
+#define IXP425_GPIO_GPOUTR_OFFSET 0x00
+#define IXP425_GPIO_GPOER_OFFSET 0x04
+#define IXP425_GPIO_GPINR_OFFSET 0x08
+#define IXP425_GPIO_GPISR_OFFSET 0x0C
+#define IXP425_GPIO_GPIT1R_OFFSET 0x10
+#define IXP425_GPIO_GPIT2R_OFFSET 0x14
+#define IXP425_GPIO_GPCLKR_OFFSET 0x18
+#define IXP425_GPIO_GPDBSELR_OFFSET 0x1C
+
+/*
+ * GPIO Register Definitions.
+ * [Only perform 32bit reads/writes]
+ */
+#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_VIRT+(x)))
+
+#define IXP425_GPIO_GPOUTR IXP425_GPIO_REG(IXP425_GPIO_GPOUTR_OFFSET)
+#define IXP425_GPIO_GPOER IXP425_GPIO_REG(IXP425_GPIO_GPOER_OFFSET)
+#define IXP425_GPIO_GPINR IXP425_GPIO_REG(IXP425_GPIO_GPINR_OFFSET)
+#define IXP425_GPIO_GPISR IXP425_GPIO_REG(IXP425_GPIO_GPISR_OFFSET)
+#define IXP425_GPIO_GPIT1R IXP425_GPIO_REG(IXP425_GPIO_GPIT1R_OFFSET)
+#define IXP425_GPIO_GPIT2R IXP425_GPIO_REG(IXP425_GPIO_GPIT2R_OFFSET)
+#define IXP425_GPIO_GPCLKR IXP425_GPIO_REG(IXP425_GPIO_GPCLKR_OFFSET)
+#define IXP425_GPIO_GPDBSELR IXP425_GPIO_REG(IXP425_GPIO_GPDBSELR_OFFSET)
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP425_OSTS_OFFSET 0x00 /* Continious TimeStamp */
+#define IXP425_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
+#define IXP425_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
+#define IXP425_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
+#define IXP425_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
+#define IXP425_OSWT_OFFSET 0x14 /* Watchdog Timer */
+#define IXP425_OSWE_OFFSET 0x18 /* Watchdog Enable */
+#define IXP425_OSWK_OFFSET 0x1C /* Watchdog Key */
+#define IXP425_OSST_OFFSET 0x20 /* Timer Status */
+
+/*
+ * Operating System Timer Register Definitions.
+ */
+
+#ifndef __ASSEMBLY__
+#define IXP425_TIMER_REG(x) ((volatile u32 *)(IXP425_TIMER_BASE_PHYS+(x)))
+#else
+#define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x))
+#endif
+
+#define IXP425_OSTS IXP425_TIMER_REG(IXP425_OSTS_OFFSET)
+#define IXP425_OST1 IXP425_TIMER_REG(IXP425_OST1_OFFSET)
+#define IXP425_OSRT1 IXP425_TIMER_REG(IXP425_OSRT1_OFFSET)
+#define IXP425_OST2 IXP425_TIMER_REG(IXP425_OST2_OFFSET)
+#define IXP425_OSRT2 IXP425_TIMER_REG(IXP425_OSRT2_OFFSET)
+#define IXP425_OSWT IXP425_TIMER_REG(IXP425_OSWT_OFFSET)
+#define IXP425_OSWE IXP425_TIMER_REG(IXP425_OSWE_OFFSET)
+#define IXP425_OSWK IXP425_TIMER_REG(IXP425_OSWK_OFFSET)
+#define IXP425_OSST IXP425_TIMER_REG(IXP425_OSST_OFFSET)
+
+/*
+ * Timer register values and bit definitions
+ */
+#define IXP425_OST_ENABLE BIT(0)
+#define IXP425_OST_ONE_SHOT BIT(1)
+/* Low order bits of reload value ignored */
+#define IXP425_OST_RELOAD_MASK (0x3)
+#define IXP425_OST_DISABLED (0x0)
+#define IXP425_OSST_TIMER_1_PEND BIT(0)
+#define IXP425_OSST_TIMER_2_PEND BIT(1)
+#define IXP425_OSST_TIMER_TS_PEND BIT(2)
+#define IXP425_OSST_TIMER_WDOG_PEND BIT(3)
+#define IXP425_OSST_TIMER_WARM_RESET BIT(4)
+
+/*
+ * Constants to make it easy to access PCI Control/Status registers
+ */
+#define PCI_NP_AD_OFFSET 0x00
+#define PCI_NP_CBE_OFFSET 0x04
+#define PCI_NP_WDATA_OFFSET 0x08
+#define PCI_NP_RDATA_OFFSET 0x0c
+#define PCI_CRP_AD_CBE_OFFSET 0x10
+#define PCI_CRP_WDATA_OFFSET 0x14
+#define PCI_CRP_RDATA_OFFSET 0x18
+#define PCI_CSR_OFFSET 0x1c
+#define PCI_ISR_OFFSET 0x20
+#define PCI_INTEN_OFFSET 0x24
+#define PCI_DMACTRL_OFFSET 0x28
+#define PCI_AHBMEMBASE_OFFSET 0x2c
+#define PCI_AHBIOBASE_OFFSET 0x30
+#define PCI_PCIMEMBASE_OFFSET 0x34
+#define PCI_AHBDOORBELL_OFFSET 0x38
+#define PCI_PCIDOORBELL_OFFSET 0x3C
+#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
+#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
+#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
+#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
+#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
+#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
+
+/*
+ * PCI Control/Status Registers
+ */
+#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_VIRT+(x)))
+
+#define PCI_NP_AD IXP425_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE IXP425_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA IXP425_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA IXP425_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE IXP425_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA IXP425_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA IXP425_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR IXP425_PCI_CSR(PCI_CSR_OFFSET)
+#define PCI_ISR IXP425_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN IXP425_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL IXP425_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE IXP425_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE IXP425_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE IXP425_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL IXP425_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL IXP425_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR IXP425_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR IXP425_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+
+/*
+ * PCI register values and bit definitions
+ */
+
+/* CSR bit definitions */
+#define PCI_CSR_HOST BIT(0)
+#define PCI_CSR_ARBEN BIT(1)
+#define PCI_CSR_ADS BIT(2)
+#define PCI_CSR_PDS BIT(3)
+#define PCI_CSR_ABE BIT(4)
+#define PCI_CSR_DBT BIT(5)
+#define PCI_CSR_ASE BIT(8)
+#define PCI_CSR_IC BIT(15)
+
+/* ISR (Interrupt status) Register bit definitions */
+#define PCI_ISR_PSE BIT(0)
+#define PCI_ISR_PFE BIT(1)
+#define PCI_ISR_PPE BIT(2)
+#define PCI_ISR_AHBE BIT(3)
+#define PCI_ISR_APDC BIT(4)
+#define PCI_ISR_PADC BIT(5)
+#define PCI_ISR_ADB BIT(6)
+#define PCI_ISR_PDB BIT(7)
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define PCI_INTEN_PSE BIT(0)
+#define PCI_INTEN_PFE BIT(1)
+#define PCI_INTEN_PPE BIT(2)
+#define PCI_INTEN_AHBE BIT(3)
+#define PCI_INTEN_APDC BIT(4)
+#define PCI_INTEN_PADC BIT(5)
+#define PCI_INTEN_ADB BIT(6)
+#define PCI_INTEN_PDB BIT(7)
+
+/*
+ * Shift value for byte enable on NP cmd/byte enable register
+ */
+#define IXP425_PCI_NP_CBE_BESL 4
+
+/*
+ * PCI commands supported by NP access unit
+ */
+#define NP_CMD_IOREAD 0x2
+#define NP_CMD_IOWRITE 0x3
+#define NP_CMD_CONFIGREAD 0xa
+#define NP_CMD_CONFIGWRITE 0xb
+#define NP_CMD_MEMREAD 0x6
+#define NP_CMD_MEMWRITE 0x7
+
+#if 0
+#ifndef __ASSEMBLY__
+extern int ixp425_pci_read(u32 addr, u32 cmd, u32* data);
+extern int ixp425_pci_write(u32 addr, u32 cmd, u32 data);
+extern void ixp425_pci_init(void *);
+#endif
+#endif
+
+/*
+ * Constants for CRP access into local config space
+ */
+#define CRP_AD_CBE_BESL 20
+#define CRP_AD_CBE_WRITE BIT(16)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP425_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
+
+
+#endif
diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index 77123842dbd..b6ebc5fde97 100644
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -154,7 +154,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xff800000
+#define CFG_FLASH_BASE 0xff000000
#define CFG_RESET_ADDRESS 0xfff00100
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE TEXT_BASE
@@ -348,7 +348,7 @@
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-#define CFG_EXTRA_FLASH_DEVICE DEVICE0 /* extra flash at device 0 */
+#define CFG_EXTRA_FLASH_DEVICE BOOT_DEVICE
#define CFG_EXTRA_FLASH_WIDTH 2 /* 16 bit */
#define CFG_BOOT_FLASH_WIDTH 2 /* 16 bit */
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
new file mode 100644
index 00000000000..3d814d014c0
--- /dev/null
+++ b/include/configs/ixdp425.h
@@ -0,0 +1,171 @@
+/*
+ * (C) Copyright 2003
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * Configuation settings for the IXDP425 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
+#define CONFIG_IXDP425 1 /* on an IXDP425 Board */
+
+/***************************************************************
+ * U-boot generic defines start here.
+ ***************************************************************/
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+/* These are u-boot generic parameters */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
+#define CONFIG_NETMASK 255.255.0.0
+#define CONFIG_IPADDR 192.168.0.21
+#define CONFIG_SERVERIP 192.168.0.250
+#define CONFIG_BOOTCOMMAND "bootm 50040000"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
+#define CONFIG_CMDLINE_TAG
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x00010000 /* default load address */
+
+#define CFG_HZ 3333333 /* spec says 66.666 MHz, but it appears to be 33 */
+ /* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/***************************************************************
+ * Platform/Board specific defines start here.
+ ***************************************************************/
+
+/*
+ * Hardware drivers
+ */
+
+
+/*
+ * select serial console configuration
+ */
+#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+
+#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
+#define PHYS_FLASH_BANK_SIZE 0x00800000 /* 8 MB Banks */
+#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
+
+#define CFG_DRAM_BASE 0x00000000
+#define CFG_DRAM_SIZE 0x01000000
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/*
+ * Expansion bus settings
+ */
+#define CFG_EXP_CS0 0xbcd23c42
+
+/*
+ * SDRAM settings
+ */
+#define CFG_SDR_CONFIG 0xd
+#define CFG_SDRAM_REFRESH_CNT 0x81a
+
+/*
+ * GPIO settings
+ */
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
+
+/* FIXME */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */
+#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
+
+#endif /* __CONFIG_H */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 16:33:42 +0000