diff options
38 files changed, 657 insertions, 122 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2a3a36eba4b..91f50b06377 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -786,6 +786,20 @@ config TARGET_LS2080ARDB development platform that supports the QorIQ LS2080A Layerscape Architecture processor. +config TARGET_LS2081ARDB + bool "Support ls2081ardb" + select ARCH_LS2080A + select ARM64 + select ARMV8_MULTIENTRY + select BOARD_LATE_INIT + select SUPPORT_SPL + select ARCH_MISC_INIT + help + Support for Freescale LS2081ARDB platform. + The LS2081A Reference design board (RDB) is a high-performance + development platform that supports the QorIQ LS2081A/LS2041A + Layerscape Architecture processor. + config TARGET_HIKEY bool "Support HiKey 96boards Consumer Edition Platform" select ARM64 diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 0188b95e99f..d5b692eb290 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -91,6 +91,7 @@ config PSCI_RESET !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ + !TARGET_LS2081ARDB && \ !ARCH_UNIPHIER && !ARCH_SNAPDRAGON && !TARGET_S32V234EVB help Most armv8 systems have PSCI support enabled in EL3, either through diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 4c16c4cd0c6..fa386c68962 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -163,11 +163,12 @@ endchoice config SYS_LS_PPA_FW_ADDR hex "Address of PPA firmware loading from" depends on FSL_LS_PPA - default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A - default 0x60500000 if SYS_LS_PPA_FW_IN_XIP - default 0x500000 if SYS_LS_PPA_FW_IN_MMC - default 0x500000 if SYS_LS_PPA_FW_IN_NAND + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A + default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A + default 0x60400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC + default 0x400000 if SYS_LS_PPA_FW_IN_NAND help If the PPA firmware locate at XIP flash, such as NOR or diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index bb029608bf2..cba0095e6a1 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2014-2015 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ @@ -98,7 +99,8 @@ static void fix_pcie_mmu_map(void) /* Fix PCIE base and size for LS2088A */ if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) || - (ver == SVR_LS2048A) || (ver == SVR_LS2044A)) { + (ver == SVR_LS2048A) || (ver == SVR_LS2044A) || + (ver == SVR_LS2081A) || (ver == SVR_LS2041A)) { for (i = 0; i < ARRAY_SIZE(final_map); i++) { switch (final_map[i].phys) { case CONFIG_SYS_PCIE1_PHYS_ADDR: diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc index c7496c02f57..3ae16ae7adf 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc @@ -5,6 +5,7 @@ SoC overview 3. LS1012A 4. LS1046A 5. LS2088A + 6. LS2081A LS1043A --------- @@ -227,3 +228,13 @@ LS2088A SoC has 3 more similar SoC personalities 3)LS2044A, few difference w.r.t. LS2084A: a) Four 64-bit ARM v8 Cortex-A72 CPUs + +LS2081A +-------- +LS2081A is 40-pin derivative of LS2084A. +So feature-wise it is same as LS2084A. +Refer to LS2084A(LS2088A) section above for details. + +It has one more similar SoC personality +1)LS2041A, few difference w.r.t. LS2081A: + a) Four 64-bit ARM v8 Cortex-A72 CPUs diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e2c25844747..2b1a4e926e2 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -175,7 +175,9 @@ dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \ ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \ ls1021a-iot-duart.dtb dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ - fsl-ls2080a-rdb.dtb + fsl-ls2080a-rdb.dtb \ + fsl-ls2081a-rdb.dtb \ + fsl-ls2088a-rdb-qspi.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1043a-qds-lpuart.dtb \ fsl-ls1043a-rdb.dtb \ diff --git a/arch/arm/dts/fsl-ls2081a-rdb.dts b/arch/arm/dts/fsl-ls2081a-rdb.dts new file mode 100644 index 00000000000..6489362fc0c --- /dev/null +++ b/arch/arm/dts/fsl-ls2081a-rdb.dts @@ -0,0 +1,59 @@ +/* + * NXP LS2081A RDB board device tree source for QSPI-boot + * + * Author: Priyanka Jain <priyanka.jain@nxp.com> + * + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "fsl-ls2080a.dtsi" + +/ { + model = "Freescale Layerscape 2081a RDB Board"; + compatible = "fsl,ls2081a-rdb", "fsl,ls2080a"; + + aliases { + spi0 = &qspi; + spi1 = &dspi; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: n25q512a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + + qflash1: n25q512a@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; +}; diff --git a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts new file mode 100644 index 00000000000..3230e7ed7df --- /dev/null +++ b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts @@ -0,0 +1,59 @@ +/* + * NXP ls2080a RDB board device tree source for QSPI-boot + * + * Author: Priyanka Jain <priyanka.jain@nxp.com> + * + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "fsl-ls2080a.dtsi" + +/ { + model = "Freescale Layerscape 2080a RDB Board"; + compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; + + aliases { + spi0 = &qspi; + spi1 = &dspi; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: s25fs512s@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <0>; + }; + + qflash1: s25fs512s@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; +}; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 95c3e2fc086..d6a273a2c4f 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2014-2015, Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -15,6 +16,8 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(LS2084A, LS2084A, 8), CPU_TYPE_ENTRY(LS2048A, LS2048A, 4), CPU_TYPE_ENTRY(LS2044A, LS2044A, 4), + CPU_TYPE_ENTRY(LS2081A, LS2081A, 8), + CPU_TYPE_ENTRY(LS2041A, LS2041A, 4), CPU_TYPE_ENTRY(LS1043A, LS1043A, 4), CPU_TYPE_ENTRY(LS1023A, LS1023A, 2), CPU_TYPE_ENTRY(LS1046A, LS1046A, 4), diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 80c421f7104..59410aa7e74 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -1,6 +1,7 @@ /* * LayerScape Internal Memory Map * + * Copyright (C) 2017 NXP Semiconductors * Copyright 2014 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ @@ -45,6 +46,9 @@ #define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01010000) #define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x01020000) #define I2C4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01030000) +#define GPIO4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01330000) +#define GPIO4_GPDIR_ADDR (GPIO4_BASE_ADDR + 0x0) +#define GPIO4_GPDAT_ADDR (GPIO4_BASE_ADDR + 0x8) #define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) #define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02110000) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 426fe8ef86b..cc3b079bbfb 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2015 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -54,6 +55,8 @@ struct cpu_type { #define SVR_LS2084A 0x870910 #define SVR_LS2048A 0x870920 #define SVR_LS2044A 0x870930 +#define SVR_LS2081A 0x870919 +#define SVR_LS2041A 0x870915 #define SVR_DEV_LS2080A 0x8701 diff --git a/board/freescale/ls1043ardb/Makefile b/board/freescale/ls1043ardb/Makefile index 2a4452e5ec1..930c69032e0 100644 --- a/board/freescale/ls1043ardb/Makefile +++ b/board/freescale/ls1043ardb/Makefile @@ -7,6 +7,6 @@ obj-y += ddr.o obj-y += ls1043ardb.o ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o +obj-$(CONFIG_NET) += eth.o obj-y += cpld.o endif diff --git a/board/freescale/ls1046ardb/Makefile b/board/freescale/ls1046ardb/Makefile index b92ed0b3ec4..40765580899 100644 --- a/board/freescale/ls1046ardb/Makefile +++ b/board/freescale/ls1046ardb/Makefile @@ -7,6 +7,6 @@ obj-y += ddr.o obj-y += ls1046ardb.o ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o +obj-$(CONFIG_NET) += eth.o obj-y += cpld.o endif diff --git a/board/freescale/ls1046ardb/README b/board/freescale/ls1046ardb/README index 1ef7d479a3c..a38c9d48300 100644 --- a/board/freescale/ls1046ardb/README +++ b/board/freescale/ls1046ardb/README @@ -59,14 +59,14 @@ Start Address End Address Description Size QSPI flash map: Start Address End Address Description Size 0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI 1MB -0x00_4010_0000 - 0x00_401F_FFFF U-Boot 1MB -0x00_4020_0000 - 0x00_402F_FFFF U-Boot Env 1MB -0x00_4030_0000 - 0x00_403F_FFFF FMan ucode 1MB -0x00_4040_0000 - 0x00_404F_FFFF UEFI 1MB -0x00_4050_0000 - 0x00_406F_FFFF PPA 2MB -0x00_4070_0000 - 0x00_408F_FFFF Secure boot header - + bootscript 2MB -0x00_4090_0000 - 0x00_40FF_FFFF Reserved 7MB +0x00_4010_0000 - 0x00_402F_FFFF U-Boot 2MB +0x00_4030_0000 - 0x00_403F_FFFF U-Boot Env 1MB +0x00_4040_0000 - 0x00_405F_FFFF PPA 2MB +0x00_4060_0000 - 0x00_408F_FFFF Secure boot header + + bootscript 3MB +0x00_4090_0000 - 0x00_4093_FFFF FMan ucode 256KB +0x00_4094_0000 - 0x00_4097_FFFF QE/uQE firmware 256KB +0x00_4098_0000 - 0x00_40FF_FFFF Reserved 6MB 0x00_4100_0000 - 0x00_43FF_FFFF FIT Image 48MB Booting Options diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README index 2808bd58519..cad860eac20 100644 --- a/board/freescale/ls2080aqds/README +++ b/board/freescale/ls2080aqds/README @@ -89,6 +89,19 @@ c) NAND boot d) SD boot e) QSPI boot +Memory map for NOR boot +------------------------- +Image Flash Offset +RCW+PBI 0x00000000 +Boot firmware (U-Boot) 0x00100000 +Boot firmware Environment 0x00300000 +PPA firmware 0x00400000 +Secure Headers 0x00600000 +DPAA2 MC 0x00A00000 +DPAA2 DPL 0x00D00000 +DPAA2 DPC 0x00E00000 +Kernel.itb 0x01000000 + Environment Variables --------------------- - mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig index 2f0465fbba2..8f64642593d 100644 --- a/board/freescale/ls2080ardb/Kconfig +++ b/board/freescale/ls2080ardb/Kconfig @@ -16,3 +16,21 @@ config SYS_CONFIG_NAME source "board/freescale/common/Kconfig" endif + +if TARGET_LS2081ARDB + +config SYS_BOARD + default "ls2080ardb" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls2080ardb" + +source "board/freescale/common/Kconfig" + +endif diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS index 759a14605c6..91f13ea7176 100644 --- a/board/freescale/ls2080ardb/MAINTAINERS +++ b/board/freescale/ls2080ardb/MAINTAINERS @@ -7,6 +7,16 @@ F: include/configs/ls2080ardb.h F: configs/ls2080ardb_defconfig F: configs/ls2080ardb_nand_defconfig +LS2088A_QSPI-boot BOARD +M: Priyanka Jain <priyanka.jain@nxp.com> +S: Maintained +F: configs/ls2088ardb_qspi_defconfig + +LS2081ARDB BOARD +M: Priyanka Jain <priyanka.jain@nxp.com> +S: Maintained +F: configs/ls2081ardb_defconfig + LS2080A_SECURE_BOOT BOARD M: Saksham Jain <saksham.jain@nxp.freescale.com> S: Maintained diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README index 0c9c574f338..205c45cb2af 100644 --- a/board/freescale/ls2080ardb/README +++ b/board/freescale/ls2080ardb/README @@ -4,10 +4,14 @@ The LS2080A Reference Design (RDB) is a high-performance computing, evaluation, and development platform that supports the QorIQ LS2080A, LS2088A Layerscape Architecture processor. -LS2080A, LS2088A SoC Overview --------------------- +The LS2081A Reference Design (RDB) is a high-performance computing, +evaluation, and development platform that supports the QorIQ LS2081A +Layerscape Architecture processor.More details in below sections + +LS2080A, LS2088A, LS2081A SoC Overview +-------------------------------------- Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A, -LS2088A SoC overview. +LS2081A, LS2088A SoC overview. LS2080ARDB board Overview ----------------------- @@ -38,11 +42,22 @@ LS2088A SoC overview. - UART - ARM JTAG support + LS2081ARDB board Overview + ------------------------- + LS2081ARDB board is similar to LS2080ARDB board + with few differences like + - Hosts LS2081A SoC + - Default boot source is QSPI-boot + - Does not have IFC interface + - RTC and QSPI flash devices are different + - Provides QIXIS access via I2C + Memory map from core's view ---------------------------- 0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom 0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR 0x00_1800_0000 .. 0x00_181F_FFFF OCRAM +0x00_2000_0000 .. 0x00_2FFF_FFFF QSPI region #1 0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1 0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 @@ -68,6 +83,45 @@ Booting Options --------------- a) NOR boot b) NAND boot +c) QSPI boot + +Memory map for NOR boot +------------------------- +Image Flash Offset +RCW+PBI 0x00000000 +Boot firmware (U-Boot) 0x00100000 +Boot firmware Environment 0x00300000 +PPA firmware 0x00400000 +Secure Headers 0x00600000 +Cortina PHY firmware 0x00980000 +DPAA2 MC 0x00A00000 +DPAA2 DPL 0x00D00000 +DPAA2 DPC 0x00E00000 +Kernel.itb 0x01000000 + +cfg_rcw_src switches needs to be changed for booting from different option. +Refer to board documentation for correct switch setting. + +QSPI boot details +=================== +Supported only for + LS2088ARDB RevF board with LS2088A SoC. + +Images needs to be copied to QSPI flash +as per memory map given below. + +Memory map for QSPI flash +------------------------- +Image Flash Offset +RCW+PBI 0x00000000 +Boot firmware (U-Boot) 0x00100000 +Boot firmware Environment 0x00300000 +PPA firmware 0x00400000 +Cortina PHY firmware 0x00980000 +DPAA2 MC 0x00A00000 +DPAA2 DPL 0x00D00000 +DPAA2 DPC 0x00E00000 +Kernel.itb 0x01000000 Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) ------------------------------------------------------------------- diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index ea05ec6f651..df2d7687181 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -1,4 +1,5 @@ /* + * Copyright (C) 2017 NXP Semiconductors * Copyright 2015 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -22,8 +23,10 @@ #include <asm/arch/ppa.h> #include <fsl_sec.h> +#ifdef CONFIG_FSL_QIXIS #include "../common/qixis.h" #include "ls2080ardb_qixis.h" +#endif #include "../common/vid.h" #define PIN_MUX_SEL_SDHC 0x00 @@ -57,12 +60,53 @@ unsigned long long get_qixis_addr(void) int checkboard(void) { +#ifdef CONFIG_FSL_QIXIS u8 sw; +#endif char buf[15]; cpu_name(buf); printf("Board: %s-RDB, ", buf); +#ifdef CONFIG_TARGET_LS2081ARDB +#ifdef CONFIG_FSL_QIXIS + sw = QIXIS_READ(arch); + printf("Board Arch: V%d, ", sw >> 4); + printf("Board version: %c, ", (sw & 0xf) + 'A'); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_QMAP_MASK) >> QIXIS_QMAP_SHIFT; + switch (sw) { + case 0: + puts("boot from QSPI DEV#0\n"); + puts("QSPI_CSA_1 mapped to QSPI DEV#1\n"); + break; + case 1: + puts("boot from QSPI DEV#1\n"); + puts("QSPI_CSA_1 mapped to QSPI DEV#0\n"); + break; + case 2: + puts("boot from QSPI EMU\n"); + puts("QSPI_CSA_1 mapped to QSPI DEV#0\n"); + break; + case 3: + puts("boot from QSPI EMU\n"); + puts("QSPI_CSA_1 mapped to QSPI DEV#1\n"); + break; + case 4: + puts("boot from QSPI DEV#0\n"); + puts("QSPI_CSA_1 mapped to QSPI EMU\n"); + break; + default: + printf("invalid setting of SW%u\n", sw); + break; + } +#endif + puts("SERDES1 Reference : "); + printf("Clock1 = 100MHz "); + printf("Clock2 = 161.13MHz"); +#else +#ifdef CONFIG_FSL_QIXIS sw = QIXIS_READ(arch); printf("Board Arch: V%d, ", sw >> 4); printf("Board version: %c, boot from ", (sw & 0xf) + 'A'); @@ -78,10 +122,11 @@ int checkboard(void) printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata)); - +#endif puts("SERDES1 Reference : "); printf("Clock1 = 156.25MHz "); printf("Clock2 = 156.25MHz"); +#endif puts("\nSERDES2 Reference : "); printf("Clock1 = 100MHz "); @@ -92,6 +137,7 @@ int checkboard(void) unsigned long get_board_sys_clk(void) { +#ifdef CONFIG_FSL_QIXIS u8 sysclk_conf = QIXIS_READ(brdcfg[1]); switch (sysclk_conf & 0x0F) { @@ -110,7 +156,8 @@ unsigned long get_board_sys_clk(void) case QIXIS_SYSCLK_166: return 166666666; } - return 66666666; +#endif + return 100000000; } int select_i2c_ch_pca9547(u8 ch) @@ -133,6 +180,7 @@ int i2c_multiplexer_select_vid_channel(u8 channel) int config_board_mux(int ctrl_type) { +#ifdef CONFIG_FSL_QIXIS u8 reg5; reg5 = QIXIS_READ(brdcfg[5]); @@ -150,7 +198,7 @@ int config_board_mux(int ctrl_type) } QIXIS_WRITE(brdcfg[5], reg5); - +#endif return 0; } @@ -180,8 +228,9 @@ int board_init(void) #endif select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); +#ifdef CONFIG_FSL_QIXIS QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN); - +#endif #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif @@ -199,12 +248,40 @@ int board_init(void) int board_early_init_f(void) { +#ifdef CONFIG_SYS_I2C_EARLY_INIT + i2c_early_init_f(); +#endif fsl_lsch3_early_init_f(); return 0; } int misc_init_r(void) { +#ifdef CONFIG_FSL_QIXIS + /* + * LS2081ARDB has smart voltage translator which needs + * to be programmed as below + */ +#ifndef CONFIG_TARGET_LS2081ARDB + u8 sw; + + sw = QIXIS_READ(arch); + /* + * LS2080ARDB/LS2088ARDB RevF board has smart voltage translator + * which needs to be programmed to enable high speed SD interface + * by setting GPIO4_10 output to zero + */ + if ((sw & 0xf) == 0x5) { +#endif + out_le32(GPIO4_GPDIR_ADDR, (1 << 21 | + in_le32(GPIO4_GPDIR_ADDR))); + out_le32(GPIO4_GPDAT_ADDR, (~(1 << 21) & + in_le32(GPIO4_GPDAT_ADDR))); +#ifndef CONFIG_TARGET_LS2081ARDB + } +#endif +#endif + if (hwconfig("sdhc")) config_board_mux(MUX_TYPE_SDHC); @@ -301,6 +378,7 @@ int ft_board_setup(void *blob, bd_t *bd) void qixis_dump_switch(void) { +#ifdef CONFIG_FSL_QIXIS int i, nr_of_cfgsw; QIXIS_WRITE(cms[0], 0x00); @@ -311,6 +389,7 @@ void qixis_dump_switch(void) QIXIS_WRITE(cms[0], i); printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); } +#endif } /* @@ -321,6 +400,8 @@ void update_spd_address(unsigned int ctrl_num, unsigned int slot, unsigned int *addr) { +#ifndef CONFIG_TARGET_LS2081ARDB +#ifdef CONFIG_FSL_QIXIS u8 sw; sw = QIXIS_READ(arch); @@ -330,4 +411,6 @@ void update_spd_address(unsigned int ctrl_num, else if (ctrl_num == 1 && slot == 1) *addr = SPD_EEPROM_ADDRESS3; } +#endif +#endif } diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig new file mode 100644 index 00000000000..0d1730fc792 --- /dev/null +++ b/configs/ls2081ardb_defconfig @@ -0,0 +1,46 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS2081ARDB=y +CONFIG_FSL_LS_PPA=y +CONFIG_QSPI_AHB_INIT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2081a-rdb" +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_QSPI_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_CMD_GREPENV=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_DM_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_FSL_DSPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig new file mode 100644 index 00000000000..139ff089906 --- /dev/null +++ b/configs/ls2088ardb_qspi_defconfig @@ -0,0 +1,46 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS2080ARDB=y +CONFIG_FSL_LS_PPA=y +CONFIG_QSPI_AHB_INIT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_QSPI_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_CMD_GREPENV=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_FSL_CAAM=y +CONFIG_DM_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_FSL_DSPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 9f69d75a89d..0a74e3e42e4 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -1,4 +1,5 @@ /* + * Copyright (C) 2017 NXP Semiconductors * Copyright (C) 2014 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -1201,6 +1202,7 @@ err: int fsl_mc_ldpaa_exit(bd_t *bd) { int err = 0; + bool is_dpl_apply_status = false; if (bd && mc_lazy_dpl_addr && !fsl_mc_ldpaa_exit(NULL)) { mc_apply_dpl(mc_lazy_dpl_addr); @@ -1211,14 +1213,18 @@ int fsl_mc_ldpaa_exit(bd_t *bd) if (bd && get_mc_boot_status() != 0) return 0; - if (bd && !get_mc_boot_status() && get_dpl_apply_status() == -1) { - printf("ERROR: fsl-mc: DPL is not applied\n"); - err = -ENODEV; - return err; - } + /* If DPL is deployed, set is_dpl_apply_status as TRUE. */ + if (!get_dpl_apply_status()) + is_dpl_apply_status = true; - if (bd && !get_mc_boot_status() && !get_dpl_apply_status()) - return err; + /* + * For case MC is loaded but DPL is not deployed, return success and + * print message on console. Else FDT fix-up code execution hanged. + */ + if (bd && !get_mc_boot_status() && !is_dpl_apply_status) { + printf("fsl-mc: DPL not deployed, DPAA2 ethernet not work\n"); + return 0; + } err = dpbp_exit(); if (err < 0) { diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index 1c5a33ac283..7565e2fd929 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2014-2015 Freescale Semiconductor, Inc. * Layerscape PCIe driver * @@ -170,7 +171,8 @@ static void ls_pcie_setup_atu(struct ls_pcie *pcie) /* Fix the pcie memory map for LS2088A series SoCs */ svr = (svr >> SVR_VAR_PER_SHIFT) & 0xFFFFFE; if (svr == SVR_LS2088A || svr == SVR_LS2084A || - svr == SVR_LS2048A || svr == SVR_LS2044A) { + svr == SVR_LS2048A || svr == SVR_LS2044A || + svr == SVR_LS2081A || svr == SVR_LS2041A) { if (io) io->phys_start = (io->phys_start & (PCIE_PHYS_SIZE - 1)) + @@ -531,7 +533,8 @@ static int ls_pcie_probe(struct udevice *dev) svr = get_svr(); svr = (svr >> SVR_VAR_PER_SHIFT) & 0xFFFFFE; if (svr == SVR_LS2088A || svr == SVR_LS2084A || - svr == SVR_LS2048A || svr == SVR_LS2044A) { + svr == SVR_LS2048A || svr == SVR_LS2044A || + svr == SVR_LS2081A || svr == SVR_LS2041A) { pcie->cfg_res.start = LS2088A_PCIE1_PHYS_ADDR + LS2088A_PCIE_PHYS_SIZE * pcie->idx; pcie->ctrl = pcie->lut + 0x40000; diff --git a/drivers/pci/pcie_layerscape.h b/drivers/pci/pcie_layerscape.h index e3324a5e52c..308b073f2b8 100644 --- a/drivers/pci/pcie_layerscape.h +++ b/drivers/pci/pcie_layerscape.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2014-2015 Freescale Semiconductor, Inc. * Layerscape PCIe driver * @@ -117,6 +118,8 @@ #define SVR_LS2084A 0x870910 #define SVR_LS2048A 0x870920 #define SVR_LS2044A 0x870930 +#define SVR_LS2081A 0x870919 +#define SVR_LS2041A 0x870915 /* LS1021a PCIE space */ #define LS1021_PCIE_SPACE_OFFSET 0x4000000000ULL diff --git a/drivers/pci/pcie_layerscape_fixup.c b/drivers/pci/pcie_layerscape_fixup.c index d504bbda378..ce709bfc147 100644 --- a/drivers/pci/pcie_layerscape_fixup.c +++ b/drivers/pci/pcie_layerscape_fixup.c @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2014-2015 Freescale Semiconductor, Inc. * Layerscape PCIe driver * @@ -82,7 +83,8 @@ static void fdt_pcie_set_msi_map_entry(void *blob, struct ls_pcie *pcie, #ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */ svr = (get_svr() >> SVR_VAR_PER_SHIFT) & 0xFFFFFE; if (svr == SVR_LS2088A || svr == SVR_LS2084A || - svr == SVR_LS2048A || svr == SVR_LS2044A) + svr == SVR_LS2048A || svr == SVR_LS2044A || + svr == SVR_LS2081A || svr == SVR_LS2041A) compat = "fsl,ls2088a-pcie"; else compat = CONFIG_FSL_PCIE_COMPAT; @@ -217,7 +219,8 @@ static void ft_pcie_ls_setup(void *blob, struct ls_pcie *pcie) #ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */ svr = (get_svr() >> SVR_VAR_PER_SHIFT) & 0xFFFFFE; if (svr == SVR_LS2088A || svr == SVR_LS2084A || - svr == SVR_LS2048A || svr == SVR_LS2044A) + svr == SVR_LS2048A || svr == SVR_LS2044A || + svr == SVR_LS2081A || svr == SVR_LS2041A) compat = "fsl,ls2088a-pcie"; else compat = CONFIG_FSL_PCIE_COMPAT; diff --git a/drivers/usb/host/xhci-fsl.c b/drivers/usb/host/xhci-fsl.c index 798c358fd91..3a16624713b 100644 --- a/drivers/usb/host/xhci-fsl.c +++ b/drivers/usb/host/xhci-fsl.c @@ -40,7 +40,8 @@ __weak int __board_usb_init(int index, enum usb_init_type init) static int erratum_a008751(void) { -#if defined(CONFIG_TARGET_LS2080AQDS) || defined(CONFIG_TARGET_LS2080ARDB) +#if defined(CONFIG_TARGET_LS2080AQDS) || defined(CONFIG_TARGET_LS2080ARDB) ||\ + defined(CONFIG_TARGET_LS2080AQDS) u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE; writel(SCFG_USB3PRM1CR_INIT, scfg + SCFG_USB3PRM1CR / 4); return 0; diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 561b81a6f49..bd9b0d30a5b 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -55,9 +55,8 @@ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 #define CONFIG_SPI_FLASH_SPANSION -#define CONFIG_SPI_FLASH_BAR -#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_SIZE SZ_64M #define FSL_QSPI_FLASH_NUM 2 /* diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index a27d70eae77..8cf4eaa0218 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #endif #ifdef CONFIG_NAND_BOOT @@ -497,7 +497,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_DEVICE_DISABLE -#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -548,14 +548,14 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #elif defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND @@ -563,7 +563,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 60c3d5d6cc9..f0033b85d8e 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -132,7 +132,7 @@ #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -408,7 +408,7 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif -#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 /* * Environment @@ -416,18 +416,18 @@ #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x20000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index b35f96db3d5..1b0106d5ab0 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -205,20 +205,20 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 #ifdef CONFIG_NAND_BOOT -/* Store Fman ucode at offeset 0x160000(11 blocks). */ +/* Store Fman ucode at offeset 0x900000(72 blocks). */ #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is * about 1MB (2040 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 2080(0x820). + * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800). */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 1000000 @@ -226,7 +226,7 @@ #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR /* FMan fireware Pre-load address */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index b14e944897b..04d74acdeb0 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -12,7 +12,7 @@ #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 #elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #else #define CONFIG_SYS_TEXT_BASE 0x60100000 #endif @@ -413,20 +413,20 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_NAND_BOOT #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 5e570cd5e8d..2647b150b46 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -235,31 +235,34 @@ #if defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif /* FMan */ #ifndef SPL_NO_FMAN -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET +#define AQR105_IRQ_MASK 0x40000000 + +#ifdef CONFIG_NET #define CONFIG_PHYLIB -#define CONFIG_PHYLIB_10G #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - #define CONFIG_PHY_VITESSE #define CONFIG_PHY_REALTEK +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G #define CONFIG_PHY_AQUANTIA -#define AQR105_IRQ_MASK 0x40000000 #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 @@ -281,7 +284,7 @@ !defined(CONFIG_QSPI_BOOT) #define CONFIG_U_QE #endif -#define CONFIG_SYS_QE_FW_ADDR 0x60600000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 #endif /* USB */ diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 1fbafaa9c24..b66b8ac72c2 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -138,6 +138,16 @@ #define CONFIG_SYS_I2C_MXC_I2C3 #define CONFIG_SYS_I2C_MXC_I2C4 +/* PCIe */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE2 /* PCIE controller 2 */ +#define CONFIG_PCIE3 /* PCIE controller 3 */ + +#ifdef CONFIG_PCI +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#endif + /* Command line configuration */ /* MMC */ @@ -163,23 +173,23 @@ /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). + * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800). */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_FMAN_FW_ADDR 0x40300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 1000000 #define CONFIG_ENV_SPI_MODE 0x03 #elif defined(CONFIG_NAND_BOOT) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 0cf6010a6cd..5d2e819e786 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -12,7 +12,7 @@ #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 #elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #else #define CONFIG_SYS_TEXT_BASE 0x60100000 #endif @@ -447,20 +447,20 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_NAND_BOOT #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 67ee62608cd..6f649a62232 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -169,27 +169,29 @@ #if defined(CONFIG_SD_BOOT) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x200000 /* 2MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #endif +#define AQR105_IRQ_MASK 0x80000000 /* FMan */ #ifndef SPL_NO_FMAN -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET + +#ifdef CONFIG_NET #define CONFIG_PHYLIB -#define CONFIG_PHYLIB_10G #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - #define CONFIG_PHY_REALTEK -#define CONFIG_PHY_AQUANTIA -#define AQR105_IRQ_MASK 0x80000000 +#endif +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHY_AQUANTIA +#define CONFIG_PHYLIB_10G #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 @@ -200,6 +202,7 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif + #endif /* QSPI device */ @@ -208,7 +211,6 @@ #define CONFIG_SPI_FLASH_SPANSION #define FSL_QSPI_FLASH_SIZE (1 << 26) #define FSL_QSPI_FLASH_NUM 2 -#define CONFIG_SPI_FLASH_BAR #endif #endif diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 285e48dbace..b044768883f 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright (C) 2014 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -28,6 +29,12 @@ #else #define CONFIG_SYS_TEXT_BASE 0x30100000 #endif +#else +#define CONFIG_SYS_TEXT_BASE 0x20100000 +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 #endif #define CONFIG_SUPPORT_RAW_INITRD @@ -185,18 +192,18 @@ unsigned long long get_qixis_addr(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581200000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "console=ttyAMA0,38400n8\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500 " \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=256" -#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ +#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ " cp.b $kernel_start $kernel_load" \ " $kernel_size && bootm $kernel_load" diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index dc52b223cb1..d0b0aa93e46 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2015 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -262,15 +263,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_TEXT_BASE 0x20010000 -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#else +#ifndef CONFIG_QSPI_BOOT #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif @@ -363,14 +358,14 @@ unsigned long get_board_ddr_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ - "mcinitcmd=esbc_validate 0x580c80000;" \ - "esbc_validate 0x580cc0000;" \ - "fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + "mcinitcmd=esbc_validate 0x580700000;" \ + "esbc_validate 0x580740000;" \ + "fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" #else #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ @@ -380,12 +375,12 @@ unsigned long get_board_ddr_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" #endif /* CONFIG_SECURE_BOOT */ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 2e0d95efd74..2dab065be1a 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2015 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -12,6 +13,14 @@ #undef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 2 +#ifdef CONFIG_FSL_QSPI +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_QIXIS_I2C_ACCESS +#endif +#define CONFIG_SYS_I2C_EARLY_INIT +#define CONFIG_DISPLAY_BOARDINFO_LATE +#endif + #define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_VOL_MONITOR_ADDR 0x38 #define CONFIG_VOL_MONITOR_IR36021_READ @@ -69,6 +78,7 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) +#ifndef CONFIG_FSL_QSPI /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */ #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) @@ -157,7 +167,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) - #define CONFIG_FSL_QIXIS /* use common QIXIS code */ #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f @@ -242,7 +251,7 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif @@ -250,12 +259,31 @@ unsigned long get_board_sys_clk(void); /* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL - +#endif #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_QMAP_MASK 0x07 +#define QIXIS_QMAP_SHIFT 5 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_RCW_SRC_QSPI 0x62 +#define QIXIS_LBMAP_ALTBANK 0x20 +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_RST_CTL_RESET_EN 0x30 +#endif + /* * I2C */ +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#endif #define I2C_MUX_PCA_ADDR 0x75 #define I2C_MUX_PCA_ADDR_PRI 0x75 /* Primary Mux*/ @@ -263,18 +291,33 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI +#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI) #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_BAR +#ifdef CONFIG_FSL_QSPI #define CONFIG_SPI_FLASH_STMICRO #endif +#ifdef CONFIG_FSL_QSPI +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_SPI_FLASH_STMICRO +#else +#define CONFIG_SPI_FLASH_SPANSION +#endif +#define FSL_QSPI_FLASH_SIZE SZ_64M /* 64MB */ +#define FSL_QSPI_FLASH_NUM 2 +#endif +#endif /* * RTC configuration */ #define RTC +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_RTC_PCF8563 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 +#else #define CONFIG_RTC_DS3231 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#endif /* EEPROM */ #define CONFIG_ID_EEPROM @@ -334,15 +377,34 @@ unsigned long get_board_sys_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ "fdtfile=fsl-ls2080a-rdb.dtb\0" \ - "mcinitcmd=esbc_validate 0x580c80000;" \ - "esbc_validate 0x580cc0000;" \ - "fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" \ + "mcinitcmd=esbc_validate 0x580700000;" \ + "esbc_validate 0x580740000;" \ + "fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" \ + BOOTENV +#else +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "scriptaddr=0x80800000\0" \ + "kernel_addr_r=0x81000000\0" \ + "pxefile_addr_r=0x81000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "ramdisk_addr_r=0x89000000\0" \ + "loadaddr=0x80100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x21000000\0" \ + "mcmemsize=0x40000000\0" \ + "mcinitcmd=fsl_mc start mc 0x20a00000" \ + " 0x20e00000 \0" \ BOOTENV #else #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -358,15 +420,16 @@ unsigned long get_board_sys_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ "fdtfile=fsl-ls2080a-rdb.dtb\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" \ + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" \ BOOTENV #endif +#endif #undef CONFIG_BOOTARGS @@ -376,11 +439,18 @@ unsigned long get_board_sys_clk(void); " hugepagesz=2m hugepages=256" #undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_QSPI_BOOT +/* Try to boot an on-QSPI kernel first, then do normal distro boot */ +#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \ + " && bootm $kernel_start" \ + " || run distro_bootcmd" +#else /* Try to boot an on-NOR kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \ +#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \ " && cp.b $kernel_start $kernel_load $kernel_size" \ " && bootm $kernel_load" \ " || run distro_bootcmd" +#endif /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET @@ -389,7 +459,11 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PHY_CORTINA #define CONFIG_PHYLIB #define CONFIG_SYS_CORTINA_FW_IN_NOR -#define CONFIG_CORTINA_FW_ADDR 0x581000000 +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_CORTINA_FW_ADDR 0x20980000 +#else +#define CONFIG_CORTINA_FW_ADDR 0x580980000 +#endif #define CONFIG_CORTINA_FW_LENGTH 0x40000 #define CORTINA_PHY_ADDR1 0x10 |