diff options
| -rw-r--r-- | doc/README.b4860qds | 366 | ||||
| -rw-r--r-- | doc/board/freescale/b4860qds.rst | 453 | ||||
| -rw-r--r-- | doc/board/index.rst | 1 |
3 files changed, 454 insertions, 366 deletions
diff --git a/doc/README.b4860qds b/doc/README.b4860qds deleted file mode 100644 index 889c8a98429..00000000000 --- a/doc/README.b4860qds +++ /dev/null @@ -1,366 +0,0 @@ -Overview --------- -The B4860QDS is a Freescale reference board that hosts the B4860 SoC (and variants). - -B4860 Overview -------------- -The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on -StarCore and Power Architecture® cores. It targets the broadband wireless -infrastructure and builds upon the proven success of the existing multicore -DSPs and Power CPUs. It is designed to bolster the rapidly changing and -expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS. - -The B4860 is a highly-integrated StarCore and Power Architecture processor that -contains: -. Six fully-programmable StarCore SC3900 FVP subsystems, divided into three -clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for -wireless base station applications -. Four dual-thread e6500 Power Architecture processors organized in one cluster-each -core runs up to 1.8 GHz -. Two DDR3/3L controllers for high-speed, industry-standard memory interface each -runs at up to 1866.67 MHz -. MAPLE-B3 hardware acceleration-for forward error correction schemes including -Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE -equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and -FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate -acceleration -. CoreNet fabric that fully supports coherency using MESI protocol between the - e6500 cores, SC3900 FVP cores, memories and external interfaces. - CoreNet fabric interconnect runs at 667 MHz and supports coherent and - non-coherent out of order transactions with prioritization and bandwidth - allocation amongst CoreNet endpoints. -. Data Path Acceleration Architecture, which includes the following: -. Frame Manager (FMan), which supports in-line packet parsing and general - classification to enable policing and QoS-based packet distribution -. Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading - of queue management, task management, load distribution, flow ordering, buffer - management, and allocation tasks from the cores -. Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec, - SSL, and 802.16 -. RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and - outbound). Supports types 5, 6 (outbound only) -. Large internal cache memory with snooping and stashing capabilities for - bandwidth saving and high utilization of processor elements. The 9856-Kbyte - internal memory space includes the following: -. 32 Kbyte L1 ICache per e6500/SC3900 core -. 32 Kbyte L1 DCache per e6500/SC3900 core -. 2048 Kbyte unified L2 cache for each SC3900 FVP cluster -. 2048 Kbyte unified L2 cache for the e6500 cluster -. Two 512 Kbyte shared L3 CoreNet platform caches (CPC) -. Sixteen 10-GHz SerDes lanes serving: -. Two Serial RapidIO interfaces. - - Each supports up to 4 lanes and a total of up to 8 lanes -. Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue-less - antenna connection -. Two 10-Gbit Ethernet controllers (10GEC) -. Six 1G/2.5-Gbit Ethernet controllers for network communications -. PCI Express controller -. Debug (Aurora) -. Two OCeaN DMAs -. Various system peripherals -. 182 32-bit timers - -B4860QDS Overview ------------------- -- DDRC1: Ten separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s, ECC, 4 GB - of memory in two ranks of 2 GB. -- DDRC2: Five separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s, ECC, 2 GB - of memory. Single rank. -- SerDes 1 multiplexing: Two Vitesse (transmit and receive path) cross-point 16x16 switch - VSC3316 -- SerDes 2 multiplexing: Two Vitesse (transmit and receive path) cross-point 8x8 switch VSC3308 -- USB 2.0 ULPI PHY USB3315 by SMSC supports USB port in host mode. - B4860 UART port is available over USB-to-UART translator USB2SER or over RS232 flat cable. -- A Vitesse dual SGMII phy VSC8662 links the B4860 SGMII lines to 2xRJ-45 copper connectors - for Stand-alone mode and to the 1000Base-X over AMC MicroTCA connector ports 0 and 2 for - AMC mode. -- The B4860 configuration may be loaded from nine bits coded reset configuration reset source. The - RCW source is set by appropriate DIP-switches: -- 16-bit NOR Flash / PROMJet -- QIXIS 8-bit NOR Flash Emulator -- 8-bit NAND Flash -- 24-bit SPI Flash -- Long address I2C EEPROM -- Available debug interfaces are: - - On-board eCWTAP controller with ETH and USB I/F - - JTAG/COP 16-pin header for any external TAP controller - - External JTAG source over AMC to support B2B configuration - - 70-pin Aurora debug connector -- QIXIS (FPGA) logic: - - 2 KB internal memory space including -- IDT840NT4 clock synthesizer provides B4860 essential clocks : SYSCLK, DDRCLK1,2 and - RTCCLK. -- Two 8T49N222A SerDes ref clock devices support two SerDes port clock frequency - total four - refclk, including CPRI clock scheme. - -B4420 Personality --------------------- - -B4420 Personality --------------------- -B4420 is a reduced personality of B4860 with less core/clusters(both SC3900 and e6500), less DDR -controllers, less serdes lanes, less SGMII interfaces and reduced target frequencies. - -Key differences between B4860 and B4420 ----------------------------------------- - -B4420 has: -1. Less e6500 cores: 1 cluster with 2 e6500 cores -2. Less SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster. -3. Single DDRC -4. 2X 4 lane serdes -5. 3 SGMII interfaces -6. no sRIO -7. no 10G - -B4860QDS Default Settings -------------------------- - -Switch Settings ----------------- - -SW1 OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] -SW2 ON ON ON ON ON ON OFF OFF -SW3 OFF OFF OFF ON OFF OFF ON OFF -SW5 OFF OFF OFF OFF OFF OFF ON ON - -Note: PCIe slots modes: All the PCIe devices work as Root Complex. -Note: Boot location: NOR flash. - -SysClk/Core(e6500)/CCB/DDR/FMan/DDRCLK/StarCore/CPRI-Maple/eTVPE-Maple/ULB-Maple -66MHz/1.6GHz/667MHz/1.6GHz data rate/667MHz/133MHz/1200MHz/500MHz/800MHz/667MHz - -a) NAND boot - SW1 [1.1] = 0 - SW2 [1.1] = 1 - SW3 [1:4] = 0001 -b) NOR boot - SW1 [1.1] = 1 - SW2 [1.1] = 0 - SW3 [1:4] = 1000. - -B4420QDS Default Settings -------------------------- - -Switch Settings ----------------- -SW1 OFF[0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] -SW2 ON OFF ON OFF ON ON OFF OFF -SW3 OFF OFF OFF ON OFF OFF ON OFF -SW5 OFF OFF OFF OFF OFF OFF ON ON - -Note: PCIe slots modes: All the PCIe devices work as Root Complex. -Note: Boot location: NOR flash. - -SysClk/Core(e6500)/CCB/DDR/FMan/DDRCLK/StarCore/CPRI-Maple/eTVPE-Maple/ULB-Maple -66MHz/1.6GHz/667MHz/1.6GHz data rate/667MHz/133MHz/1200MHz/500MHz/800MHz/667MHz - -a) NAND boot - SW1 [1.1] = 0 - SW2 [1.1] = 1 - SW3 [1:4] = 0001 -b) NOR boot - SW1 [1.1] = 1 - SW2 [1.1] = 0 - SW3 [1:4] = 1000. - -Memory map on B4860QDS ----------------------- -The addresses in brackets are physical addresses. - -Start Address End Address Description Size -0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB -0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB -0xF_FF81_0000 0xF_FFDE_FFFF Free 5 MB -0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB -0xF_FF00_0000 0xF_FF7F_FFFF Free 8 MB -0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16 MB -0xF_F801_0000 0xF_FDFF_FFFF Free 95 MB -0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB -0xF_F600_0000 0xF_F7FF_FFFF QMAN s/w portal 32 MB -0xF_F400_0000 0xF_F5FF_FFFF BMAN s/w portal 32 MB -0xF_F000_0000 0xF_F3FF_FFFF Free 64 MB -0xF_E800_0000 0xF_EFFF_FFFF IFC NOR Flash 128 MB -0xF_E000_0000 0xF_E7FF_FFFF Promjet 128 MB -0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB -0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB -0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB -0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB -0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB -0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB -0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB -0xC_0000_0000 0xC_1FFF_FFFF PCIe Mem Space 512 MB -0x1_0000_0000 0xB_FFFF_FFFF Free 44 GB -0x0_8000_0000 0x0_FFFF_FFFF DDRC1 2 GB -0x0_0000_0000 0x0_7FFF_FFFF DDRC2 2 GB - -Memory map on B4420QDS ----------------------- -The addresses in brackets are physical addresses. - -Start Address End Address Description Size -0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB -0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB -0xF_FF81_0000 0xF_FFDE_FFFF Free 5 MB -0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB -0xF_FF00_0000 0xF_FF7F_FFFF Free 8 MB -0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16 MB -0xF_F801_0000 0xF_FDFF_FFFF Free 95 MB -0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB -0xF_F600_0000 0xF_F7FF_FFFF QMAN s/w portal 32 MB -0xF_F400_0000 0xF_F5FF_FFFF BMAN s/w portal 32 MB -0xF_F000_0000 0xF_F3FF_FFFF Free 64 MB -0xF_E800_0000 0xF_EFFF_FFFF IFC NOR Flash 128 MB -0xF_E000_0000 0xF_E7FF_FFFF Promjet 128 MB -0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB -0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB -0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB -0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB -0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB -0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB -0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB -0xC_0000_0000 0xC_1FFF_FFFF PCIe Mem Space 512 MB -0x1_0000_0000 0xB_FFFF_FFFF Free 44 GB -0x0_0000_0000 0x0_FFFF_FFFF DDRC1 4 GB - - -NOR Flash memory Map on B4860 and B4420QDS ------------------------------------------- - Start End Definition Size -0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB -0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xEF300000 0xEFEFFFFF rootfs (alternate bank) 12MB -0xEE800000 0xEE8FFFFF device tree (alternate bank) 1MB -0xEE020000 0xEE6FFFFF Linux.uImage (alternate bank) 6MB+896KB -0xEE000000 0xEE01FFFF RCW (alternate bank) 128KB -0xEDF40000 0xEDFFFFFF U-Boot (alternate bank) 768KB -0xEDF20000 0xEDF3FFFF U-Boot env (alternate bank) 128KB -0xEDF00000 0xEDF1FFFF FMAN ucode (alternate bank) 128KB -0xED300000 0xEDEFFFFF rootfs (current bank) 12MB -0xEC800000 0xEC8FFFFF device tree (current bank) 1MB -0xEC020000 0xEC6FFFFF Linux.uImage (current bank) 6MB+896KB -0xEC000000 0xEC01FFFF RCW (current bank) 128KB - -Various Software configurations/environment variables/commands --------------------------------------------------------------- -The below commands apply to both B4860QDS and B4420QDS. - -1. U-Boot environment variable hwconfig - The default hwconfig is: - hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: - dr_mode=host,phy_type=ulpi - Note: For USB gadget set "dr_mode=peripheral" - -2. FMAN Ucode versions - fsl_fman_ucode_B4860_106_3_6.bin - -3. Switching to alternate bank - Commands for switching to alternate bank. - - 1. To change from vbank0 to vbank2 - => qixis_reset altbank (it will boot using vbank2) - - 2.To change from vbank2 to vbank0 - => qixis reset (it will boot using vbank0) - -4. To change personality of board - For changing personality from B4860 to B4420 - 1)Boot from vbank0 - 2)Flash vbank2 with b4420 rcw and U-Boot - 3)Give following commands to uboot prompt - => mw.b ffdf0040 0x30; - => mw.b ffdf0010 0x00; - => mw.b ffdf0062 0x02; - => mw.b ffdf0050 0x02; - => mw.b ffdf0010 0x30; - => reset - - Note: Power off cycle will lead to default switch settings. - Note: 0xffdf0000 is the address of the QIXIS FPGA. - -5. Switching between NOR and NAND boot(RCW src changed from NOR <-> NAND) - - To change from NOR to NAND boot give following command on uboot prompt - => mw.b ffdf0040 0x30 - => mw.b ffdf0010 0x00 - => mw.b 0xffdf0050 0x08 - => mw.b 0xffdf0060 0x82 - => mw.b ffdf0061 0x00 - => mw.b ffdf0010 0x30 - => reset - - To change from NAND to NOR boot give following command on uboot prompt: - => mw.b ffdf0040 0x30 - => mw.b ffdf0010 0x00 - => mw.b 0xffdf0050 0x00(for vbank0) or (mw.b 0xffdf0050 0x02 for vbank2) - => mw.b 0xffdf0060 0x12 - => mw.b ffdf0061 0x01 - => mw.b ffdf0010 0x30 - => reset - - Note: Power off cycle will lead to default switch settings. - Note: 0xffdf0000 is the address of the QIXIS FPGA. - -6. Ethernet interfaces for B4860QDS - Serdes protocosl tested: - 0x2a, 0x8d (serdes1, serdes2) [DEFAULT] - 0x2a, 0xb2 (serdes1, serdes2) - - When using [DEFAULT] RCW, which including 2 * 1G SGMII on board and 2 * 1G - SGMII on SGMII riser card. - Under U-Boot these network interfaces are recognized as: - FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5 and FM1@DTSEC6. - - On Linux the interfaces are renamed as: - . eth2 -> fm1-gb2 - . eth3 -> fm1-gb3 - . eth4 -> fm1-gb4 - . eth5 -> fm1-gb5 - -7. RCW and Ethernet interfaces for B4420QDS - Serdes protocosl tested: - 0x18, 0x9e (serdes1, serdes2) - - Under U-Boot these network interfaces are recognized as: - FM1@DTSEC3, FM1@DTSEC4 and e1000#0. - - On Linux the interfaces are renamed as: - . eth2 -> fm1-gb2 - . eth3 -> fm1-gb3 - -NAND boot with 2 Stage boot loader ----------------------------------- -PBL initialise the internal SRAM and copy SPL(160KB) in SRAM. -SPL further initialise DDR using SPD and environment variables and copy -U-Boot(768 KB) from flash to DDR. -Finally SPL transer control to U-Boot for futher booting. - -SPL has following features: - - Executes within 256K - - No relocation required - - Run time view of SPL framework during boot :- - ----------------------------------------------- - Area | Address | ------------------------------------------------ - Secure boot | 0xFFFC0000 (32KB) | - headers | | - ----------------------------------------------- - GD, BD | 0xFFFC8000 (4KB) | - ----------------------------------------------- - ENV | 0xFFFC9000 (8KB) | - ----------------------------------------------- - HEAP | 0xFFFCB000 (30KB) | - ----------------------------------------------- - STACK | 0xFFFD8000 (22KB) | - ----------------------------------------------- - U-Boot SPL | 0xFFFD8000 (160KB) | - ----------------------------------------------- - -NAND Flash memory Map on B4860 and B4420QDS ------------------------------------------- - Start End Definition Size -0x000000 0x0FFFFF U-Boot 1MB -0x140000 0x15FFFF U-Boot env 128KB -0x1A0000 0x1BFFFF FMAN Ucode 128KB diff --git a/doc/board/freescale/b4860qds.rst b/doc/board/freescale/b4860qds.rst new file mode 100644 index 00000000000..37d7d08b093 --- /dev/null +++ b/doc/board/freescale/b4860qds.rst @@ -0,0 +1,453 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +B4860QDS +======== + +The B4860QDS is a Freescale reference board that hosts the B4860 SoC +(and variants). + +B4860 Overview +-------------- +The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on +StarCore and Power Architecture® cores. It targets the broadband wireless +infrastructure and builds upon the proven success of the existing multicore +DSPs and Power CPUs. It is designed to bolster the rapidly changing and +expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS. + +The B4860 is a highly-integrated StarCore and Power Architecture processor that +contains: + +* Six fully-programmable StarCore SC3900 FVP subsystems, divided into three + clusters-each core runs up to 1.2 GHz, with an architecture highly optimized + for wireless base station applications +* Four dual-thread e6500 Power Architecture processors organized in one + cluster-each core runs up to 1.8 GHz +* Two DDR3/3L controllers for high-speed, industry-standard memory interface + each runs at up to 1866.67 MHz +* MAPLE-B3 hardware acceleration-for forward error correction schemes including + Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE + equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and + FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate + acceleration +* CoreNet fabric that fully supports coherency using MESI protocol between the + e6500 cores, SC3900 FVP cores, memories and external interfaces. + CoreNet fabric interconnect runs at 667 MHz and supports coherent and + non-coherent out of order transactions with prioritization and bandwidth + allocation amongst CoreNet endpoints. +* Data Path Acceleration Architecture, which includes the following: + + * Frame Manager (FMan), which supports in-line packet parsing and general + classification to enable policing and QoS-based packet distribution + * Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading + of queue management, task management, load distribution, flow ordering, + buffer management, and allocation tasks from the cores + * Security engine (SEC 5.3)-crypto-acceleration for protocols such as + IPsec, SSL, and 802.16 + * RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound + and outbound). Supports types 5, 6 (outbound only) + +* Large internal cache memory with snooping and stashing capabilities for + bandwidth saving and high utilization of processor elements. The 9856-Kbyte + internal memory space includes the following: + + * 32 Kbyte L1 ICache per e6500/SC3900 core + * 32 Kbyte L1 DCache per e6500/SC3900 core + * 2048 Kbyte unified L2 cache for each SC3900 FVP cluster + * 2048 Kbyte unified L2 cache for the e6500 cluster + * Two 512 Kbyte shared L3 CoreNet platform caches (CPC) + +* Sixteen 10-GHz SerDes lanes serving: + + * Two Serial RapidIO interfaces + * Each supports up to 4 lanes and a total of up to 8 lanes + +* Up to 8-lanes Common Public Radio Interface (CPRI) controller for + glue-less antenna connection +* Two 10-Gbit Ethernet controllers (10GEC) +* Six 1G/2.5-Gbit Ethernet controllers for network communications +* PCI Express controller +* Debug (Aurora) +* Two OCeaN DMAs +* Various system peripherals +* 182 32-bit timers + +B4860QDS Overview +----------------- +- DDRC1: Ten separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s, + ECC, 4 GB of memory in two ranks of 2 GB. +- DDRC2: Five separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s, + ECC, 2 GB of memory. Single rank. +- SerDes 1 multiplexing: Two Vitesse (transmit and receive path) cross-point + 16x16 switch VSC3316 +- SerDes 2 multiplexing: Two Vitesse (transmit and receive path) cross-point + 8x8 switch VSC3308 +- USB 2.0 ULPI PHY USB3315 by SMSC supports USB port in host mode. + B4860 UART port is available over USB-to-UART translator USB2SER or over + RS232 flat cable. +- A Vitesse dual SGMII phy VSC8662 links the B4860 SGMII lines to 2xRJ-45 + copper connectors for Stand-alone mode and to the 1000Base-X over AMC + MicroTCA connector ports 0 and 2 for AMC mode. +- The B4860 configuration may be loaded from nine bits coded reset configuration + reset source. The RCW source is set by appropriate DIP-switches. +- 16-bit NOR Flash / PROMJet +- QIXIS 8-bit NOR Flash Emulator +- 8-bit NAND Flash +- 24-bit SPI Flash +- Long address I2C EEPROM +- Available debug interfaces are: + + - On-board eCWTAP controller with ETH and USB I/F + - JTAG/COP 16-pin header for any external TAP controller + - External JTAG source over AMC to support B2B configuration + - 70-pin Aurora debug connector + +- QIXIS (FPGA) logic: + - 2 KB internal memory space including + +- IDT840NT4 clock synthesizer provides B4860 essential clocks : SYSCLK, + DDRCLK1,2 and RTCCLK. +- Two 8T49N222A SerDes ref clock devices support two SerDes port clock + frequency - total four refclk, including CPRI clock scheme. + + +B4420 Personality +----------------- + +B4420 is a reduced personality of B4860 with less core/clusters(both SC3900 +and e6500), less DDR controllers, less serdes lanes, less SGMII interfaces +and reduced target frequencies. + +Key differences between B4860 and B4420 +--------------------------------------- + +B4420 has: + +1. Less e6500 cores: 1 cluster with 2 e6500 cores +2. Less SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster +3. Single DDRC +4. 2X 4 lane serdes +5. 3 SGMII interfaces +6. no sRIO +7. no 10G + +B4860QDS Default Settings +------------------------- + +Switch Settings +--------------- + +.. code-block:: none + + SW1 OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] + SW2 ON ON ON ON ON ON OFF OFF + SW3 OFF OFF OFF ON OFF OFF ON OFF + SW5 OFF OFF OFF OFF OFF OFF ON ON + +Note: + +- PCIe slots modes: All the PCIe devices work as Root Complex. +- Boot location: NOR flash. + +SysClk/Core(e6500)/CCB/DDR/FMan/DDRCLK/StarCore/CPRI-Maple/eTVPE-Maple/ULB-Maple +66MHz/1.6GHz/667MHz/1.6GHz data rate/667MHz/133MHz/1200MHz/500MHz/800MHz/667MHz + +NAND boot:: + + SW1 [1.1] = 0 + SW2 [1.1] = 1 + SW3 [1:4] = 0001 + +NOR boot:: + + SW1 [1.1] = 1 + SW2 [1.1] = 0 + SW3 [1:4] = 1000 + +B4420QDS Default Settings +------------------------- + +Switch Settings +--------------- + +.. code-block:: none + + SW1 OFF[0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] + SW2 ON OFF ON OFF ON ON OFF OFF + SW3 OFF OFF OFF ON OFF OFF ON OFF + SW5 OFF OFF OFF OFF OFF OFF ON ON + +Note: + +- PCIe slots modes: All the PCIe devices work as Root Complex. +- Boot location: NOR flash. + +SysClk/Core(e6500)/CCB/DDR/FMan/DDRCLK/StarCore/CPRI-Maple/eTVPE-Maple/ULB-Maple +66MHz/1.6GHz/667MHz/1.6GHz data rate/667MHz/133MHz/1200MHz/500MHz/800MHz/667MHz + +NAND boot:: + + SW1 [1.1] = 0 + SW2 [1.1] = 1 + SW3 [1:4] = 0001 + +NOR boot:: + + SW1 [1.1] = 1 + SW2 [1.1] = 0 + SW3 [1:4] = 1000 + +Memory map on B4860QDS +---------------------- +The addresses in brackets are physical addresses. + +============= ============= =============== ======= +Start Address End Address Description Size +============= ============= =============== ======= +0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB +0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB +0xF_FF81_0000 0xF_FFDE_FFFF Free 5 MB +0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB +0xF_FF00_0000 0xF_FF7F_FFFF Free 8 MB +0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16 MB +0xF_F801_0000 0xF_FDFF_FFFF Free 95 MB +0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB +0xF_F600_0000 0xF_F7FF_FFFF QMAN s/w portal 32 MB +0xF_F400_0000 0xF_F5FF_FFFF BMAN s/w portal 32 MB +0xF_F000_0000 0xF_F3FF_FFFF Free 64 MB +0xF_E800_0000 0xF_EFFF_FFFF IFC NOR Flash 128 MB +0xF_E000_0000 0xF_E7FF_FFFF Promjet 128 MB +0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB +0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB +0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB +0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB +0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB +0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB +0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB +0xC_0000_0000 0xC_1FFF_FFFF PCIe Mem Space 512 MB +0x1_0000_0000 0xB_FFFF_FFFF Free 44 GB +0x0_8000_0000 0x0_FFFF_FFFF DDRC1 2 GB +0x0_0000_0000 0x0_7FFF_FFFF DDRC2 2 GB +============= ============= =============== ======= + +Memory map on B4420QDS +---------------------- +The addresses in brackets are physical addresses. + +============= ============= =============== ======= +Start Address End Address Description Size +============= ============= =============== ======= +0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB +0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB +0xF_FF81_0000 0xF_FFDE_FFFF Free 5 MB +0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB +0xF_FF00_0000 0xF_FF7F_FFFF Free 8 MB +0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16 MB +0xF_F801_0000 0xF_FDFF_FFFF Free 95 MB +0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB +0xF_F600_0000 0xF_F7FF_FFFF QMAN s/w portal 32 MB +0xF_F400_0000 0xF_F5FF_FFFF BMAN s/w portal 32 MB +0xF_F000_0000 0xF_F3FF_FFFF Free 64 MB +0xF_E800_0000 0xF_EFFF_FFFF IFC NOR Flash 128 MB +0xF_E000_0000 0xF_E7FF_FFFF Promjet 128 MB +0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB +0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB +0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB +0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB +0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB +0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB +0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB +0xC_0000_0000 0xC_1FFF_FFFF PCIe Mem Space 512 MB +0x1_0000_0000 0xB_FFFF_FFFF Free 44 GB +0x0_0000_0000 0x0_FFFF_FFFF DDRC1 4 GB +============= ============= =============== ======= + +NOR Flash memory Map on B4860 and B4420QDS +------------------------------------------ + +============= ============= ============================== ========= + Start End Definition Size +============= ============= ============================== ========= +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB +0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB +0xEF300000 0xEFEFFFFF rootfs (alternate bank) 12MB +0xEE800000 0xEE8FFFFF device tree (alternate bank) 1MB +0xEE020000 0xEE6FFFFF Linux.uImage (alternate bank) 6MB+896KB +0xEE000000 0xEE01FFFF RCW (alternate bank) 128KB +0xEDF40000 0xEDFFFFFF U-Boot (alternate bank) 768KB +0xEDF20000 0xEDF3FFFF U-Boot env (alternate bank) 128KB +0xEDF00000 0xEDF1FFFF FMAN ucode (alternate bank) 128KB +0xED300000 0xEDEFFFFF rootfs (current bank) 12MB +0xEC800000 0xEC8FFFFF device tree (current bank) 1MB +0xEC020000 0xEC6FFFFF Linux.uImage (current bank) 6MB+896KB +0xEC000000 0xEC01FFFF RCW (current bank) 128KB +============= ============= ============================== ========= + +Various Software configurations/environment variables/commands +-------------------------------------------------------------- +The below commands apply to both B4860QDS and B4420QDS. + +U-Boot environment variable hwconfig +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The default hwconfig is: + +.. code-block:: none + + hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:dr_mode=host,phy_type=ulpi + +Note: For USB gadget set "dr_mode=peripheral" + +FMAN Ucode versions +^^^^^^^^^^^^^^^^^^^ + +fsl_fman_ucode_B4860_106_3_6.bin + +Switching to alternate bank +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Commands for switching to alternate bank. + +1. To change from vbank0 to vbank2 + +.. code-block:: none + + => qixis_reset altbank (it will boot using vbank2) + +2. To change from vbank2 to vbank0 + +.. code-block:: none + + => qixis reset (it will boot using vbank0) + +To change personality of board +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +For changing personality from B4860 to B4420 + +1. Boot from vbank0 +2. Flash vbank2 with b4420 rcw and U-Boot +3. Give following commands to uboot prompt + +.. code-block:: none + + => mw.b ffdf0040 0x30; + => mw.b ffdf0010 0x00; + => mw.b ffdf0062 0x02; + => mw.b ffdf0050 0x02; + => mw.b ffdf0010 0x30; + => reset + +Note: + +- Power off cycle will lead to default switch settings. +- 0xffdf0000 is the address of the QIXIS FPGA. + +Switching between NOR and NAND boot(RCW src changed from NOR <-> NAND) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +To change from NOR to NAND boot give following command on uboot prompt + +.. code-block:: none + + => mw.b ffdf0040 0x30 + => mw.b ffdf0010 0x00 + => mw.b 0xffdf0050 0x08 + => mw.b 0xffdf0060 0x82 + => mw.b ffdf0061 0x00 + => mw.b ffdf0010 0x30 + => reset + +To change from NAND to NOR boot give following command on uboot prompt: + +.. code-block:: none + + => mw.b ffdf0040 0x30 + => mw.b ffdf0010 0x00 + => mw.b 0xffdf0050 0x00(for vbank0) or (mw.b 0xffdf0050 0x02 for vbank2) + => mw.b 0xffdf0060 0x12 + => mw.b ffdf0061 0x01 + => mw.b ffdf0010 0x30 + => reset + +Note: + +- Power off cycle will lead to default switch settings. +- 0xffdf0000 is the address of the QIXIS FPGA. + +Ethernet interfaces for B4860QDS +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Serdes protocosl tested: +* 0x2a, 0x8d (serdes1, serdes2) [DEFAULT] +* 0x2a, 0xb2 (serdes1, serdes2) + +When using [DEFAULT] RCW, which including 2 * 1G SGMII on board and 2 * 1G +SGMII on SGMII riser card. + +Under U-Boot these network interfaces are recognized as:: + + FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5 and FM1@DTSEC6. + +On Linux the interfaces are renamed as:: + + eth2 -> fm1-gb2 + eth3 -> fm1-gb3 + eth4 -> fm1-gb4 + eth5 -> fm1-gb5 + +RCW and Ethernet interfaces for B4420QDS +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Serdes protocosl tested: +* 0x18, 0x9e (serdes1, serdes2) + +Under U-Boot these network interfaces are recognized as:: + + FM1@DTSEC3, FM1@DTSEC4 and e1000#0. + +On Linux the interfaces are renamed as:: + + eth2 -> fm1-gb2 + eth3 -> fm1-gb3 + +NAND boot with 2 Stage boot loader +---------------------------------- +PBL initialise the internal SRAM and copy SPL(160KB) in SRAM. +SPL further initialise DDR using SPD and environment variables and copy +U-Boot(768 KB) from flash to DDR. +Finally SPL transer control to U-Boot for futher booting. + +SPL has following features: + - Executes within 256K + - No relocation required + +Run time view of SPL framework during boot: + ++----------------------------------------------+ +|Area | Address | ++----------------------------------------------+ +|Secure boot | 0xFFFC0000 (32KB) | +|headers | | ++----------------------------------------------+ +|GD, BD | 0xFFFC8000 (4KB) | ++----------------------------------------------+ +|ENV | 0xFFFC9000 (8KB) | ++----------------------------------------------+ +|HEAP | 0xFFFCB000 (30KB) | ++----------------------------------------------+ +|STACK | 0xFFFD8000 (22KB) | ++----------------------------------------------+ +|U-Boot SPL | 0xFFFD8000 (160KB) | ++----------------------------------------------+ + +NAND Flash memory Map on B4860 and B4420QDS +------------------------------------------- + +============= ============= ============================= ===== +Start End Definition Size +============= ============= ============================= ===== +0x000000 0x0FFFFF U-Boot 1MB +0x140000 0x15FFFF U-Boot env 128KB +0x1A0000 0x1BFFFF FMAN Ucode 128KB +============= ============= ============================= ===== diff --git a/doc/board/index.rst b/doc/board/index.rst index b2f83b6d9a6..a7e94cf00e0 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -10,6 +10,7 @@ Board-specific doc atmel/index coreboot/index emulation/index + freescale/index google/index intel/index renesas/index |