diff options
| -rw-r--r-- | arch/mips/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/mips/dts/tplink_wdr4300.dts | 53 | ||||
| -rw-r--r-- | arch/mips/mach-ath79/Kconfig | 5 | ||||
| -rw-r--r-- | board/tplink/wdr4300/Kconfig | 15 | ||||
| -rw-r--r-- | board/tplink/wdr4300/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/tplink/wdr4300/Makefile | 5 | ||||
| -rw-r--r-- | board/tplink/wdr4300/wdr4300.c | 74 | ||||
| -rw-r--r-- | configs/tplink_wdr4300_defconfig | 43 | ||||
| -rw-r--r-- | include/configs/tplink_wdr4300.h | 93 |
9 files changed, 295 insertions, 0 deletions
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index bd87ead9723..a94b7455507 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_TARGET_AP121) += ap121.dtb dtb-$(CONFIG_TARGET_AP143) += ap143.dtb dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb +dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb targets += $(dtb-y) diff --git a/arch/mips/dts/tplink_wdr4300.dts b/arch/mips/dts/tplink_wdr4300.dts new file mode 100644 index 00000000000..cfda4df72b7 --- /dev/null +++ b/arch/mips/dts/tplink_wdr4300.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "ar934x.dtsi" + +/ { + model = "TP-Link WDR4300 Board"; + compatible = "tplink,wdr4300", "qca,ar934x"; + + aliases { + serial0 = &uart0; + spi0 = &spi0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&gmac0 { + phy-mode = "rgmii"; + status = "okay"; +}; + +&spi0 { + spi-max-frequency = <25000000>; + status = "okay"; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + memory-map = <0x1e000000 0x00800000>; + spi-max-frequency = <25000000>; + reg = <0>; + }; +}; + +&uart0 { + clock-frequency = <40000000>; + status = "okay"; +}; + +&xtal { + clock-frequency = <40000000>; +}; diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index 527960f4eb7..7d483aa8dce 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -42,9 +42,14 @@ config TARGET_AP143 bool "AP143 Reference Board" select SOC_QCA953X +config BOARD_TPLINK_WDR4300 + bool "TP-Link WDR4300 Board" + select SOC_AR934X + endchoice source "board/qca/ap121/Kconfig" source "board/qca/ap143/Kconfig" +source "board/tplink/wdr4300/Kconfig" endmenu diff --git a/board/tplink/wdr4300/Kconfig b/board/tplink/wdr4300/Kconfig new file mode 100644 index 00000000000..902abf560d1 --- /dev/null +++ b/board/tplink/wdr4300/Kconfig @@ -0,0 +1,15 @@ +if BOARD_TPLINK_WDR4300 + +config SYS_VENDOR + default "tplink" + +config SYS_SOC + default "ath79" + +config SYS_BOARD + default "wdr4300" + +config SYS_CONFIG_NAME + default "tplink_wdr4300" + +endif diff --git a/board/tplink/wdr4300/MAINTAINERS b/board/tplink/wdr4300/MAINTAINERS new file mode 100644 index 00000000000..db239c291a7 --- /dev/null +++ b/board/tplink/wdr4300/MAINTAINERS @@ -0,0 +1,6 @@ +TPLINK_WDR4300 BOARD +M: Marek Vasut <marex@denx.de> +S: Maintained +F: board/tplink/wdr4300/ +F: include/configs/tplink_wdr4300.h +F: configs/tplink_wdr4300_defconfig diff --git a/board/tplink/wdr4300/Makefile b/board/tplink/wdr4300/Makefile new file mode 100644 index 00000000000..4f0c2966287 --- /dev/null +++ b/board/tplink/wdr4300/Makefile @@ -0,0 +1,5 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = wdr4300.o diff --git a/board/tplink/wdr4300/wdr4300.c b/board/tplink/wdr4300/wdr4300.c new file mode 100644 index 00000000000..6e070fd5580 --- /dev/null +++ b/board/tplink/wdr4300/wdr4300.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2016 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/addrspace.h> +#include <asm/types.h> +#include <mach/ath79.h> +#include <mach/ar71xx_regs.h> +#include <mach/ddr.h> +#include <debug_uart.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_USB +static void wdr4300_usb_start(void) +{ + void __iomem *gpio_regs = map_physmem(AR71XX_GPIO_BASE, + AR71XX_GPIO_SIZE, MAP_NOCACHE); + if (!gpio_regs) + return; + + /* Power up the USB HUB. */ + clrbits_be32(gpio_regs + AR71XX_GPIO_REG_OE, BIT(21) | BIT(22)); + writel(BIT(21) | BIT(22), gpio_regs + AR71XX_GPIO_REG_SET); + mdelay(1); + + ath79_usb_reset(); +} +#else +static inline void wdr4300_usb_start(void) {} +#endif + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + void __iomem *regs; + + regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE, + MAP_NOCACHE); + + /* Assure JTAG is not disconnected. */ + writel(0x40, regs + AR934X_GPIO_REG_FUNC); + + /* Configure default GPIO input/output regs. */ + writel(0x3031b, regs + AR71XX_GPIO_REG_OE); + writel(0x0f804, regs + AR71XX_GPIO_REG_OUT); + + /* Configure pin multiplexing. */ + writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC0); + writel(0x0b0a0980, regs + AR934X_GPIO_REG_OUT_FUNC1); + writel(0x00180000, regs + AR934X_GPIO_REG_OUT_FUNC2); + writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3); + writel(0x0000004d, regs + AR934X_GPIO_REG_OUT_FUNC4); + writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5); + +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); +#endif + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + ar934x_pll_init(560, 480, 240); + ar934x_ddr_init(560, 480, 240); +#endif + + wdr4300_usb_start(); + ath79_eth_reset(); + + return 0; +} +#endif diff --git a/configs/tplink_wdr4300_defconfig b/configs/tplink_wdr4300_defconfig new file mode 100644 index 00000000000..b1af2f6f35f --- /dev/null +++ b/configs/tplink_wdr4300_defconfig @@ -0,0 +1,43 @@ +CONFIG_MIPS=y +CONFIG_ARCH_ATH79=y +CONFIG_BOARD_TPLINK_WDR4300=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SYS_NS16550=y +CONFIG_DM_SERIAL=y +CONFIG_DEFAULT_DEVICE_TREE="tplink_wdr4300" +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_NET=y +CONFIG_CMD_NFS=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_ETH=y +CONFIG_AG7XXX=y +CONFIG_CLK=y +CONFIG_CMD_USB=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_STORAGE=y +CONFIG_ATH79_SPI=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_DATAFLASH=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PINCTRL=y diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h new file mode 100644 index 00000000000..2b9e92ed2b1 --- /dev/null +++ b/include/configs/tplink_wdr4300.h @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2016 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SYS_TEXT_BASE 0xa1000000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_MHZ 280 +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) + +/* Cache Configuration */ +#define CONFIG_SYS_DCACHE_SIZE 0x8000 +#define CONFIG_SYS_ICACHE_SIZE 0x10000 +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_MALLOC_LEN 0x40000 +#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 + +#define CONFIG_SYS_SDRAM_BASE 0xa0000000 +#define CONFIG_SYS_LOAD_ADDR 0xa1000000 +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) + +/* + * Serial Port + */ +#define CONFIG_SYS_NS16550_CLK 40000000 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE \ + {9600, 19200, 38400, 57600, 115200} + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" +#define CONFIG_BOOTCOMMAND \ + "dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr" +#define CONFIG_LZMA + +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x10000 + +/* + * Command + */ +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* USB, USB storage, USB ethernet */ +#define CONFIG_EHCI_MMIO_BIG_ENDIAN +#define CONFIG_EHCI_DESC_BIG_ENDIAN +#define CONFIG_EHCI_IS_TDI + +#define CONFIG_DOS_PARTITION + +/* + * Diagnostics + */ +#define CONFIG_SYS_MEMTEST_START 0x80100000 +#define CONFIG_SYS_MEMTEST_END 0x83f00000 +#define CONFIG_CMD_MEMTEST + +#define CONFIG_USE_PRIVATE_LIBGCC + +#define CONFIG_CMD_MII +#define CONFIG_PHY_GIGE + +#endif /* __CONFIG_H */ |