diff options
| -rw-r--r-- | arch/mips/dts/Makefile | 2 | ||||
| -rw-r--r-- | arch/mips/dts/pic32mzda_sk.dts | 38 | ||||
| -rw-r--r-- | arch/mips/mach-pic32/Kconfig | 13 | ||||
| -rw-r--r-- | board/microchip/pic32mzda/Kconfig | 13 | ||||
| -rw-r--r-- | board/microchip/pic32mzda/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/microchip/pic32mzda/Makefile | 7 | ||||
| -rw-r--r-- | board/microchip/pic32mzda/README | 22 | ||||
| -rw-r--r-- | board/microchip/pic32mzda/pic32mzda.c | 31 | ||||
| -rw-r--r-- | configs/pic32mzdask_defconfig | 30 | ||||
| -rw-r--r-- | include/configs/pic32mzdask.h | 93 |
10 files changed, 254 insertions, 1 deletions
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index 47b6eb50c35..b5139187c20 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -2,7 +2,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -dtb-y += +dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb targets += $(dtb-y) diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts new file mode 100644 index 00000000000..99e7f649838 --- /dev/null +++ b/arch/mips/dts/pic32mzda_sk.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2015 Purna Chandra Mandal, purna.mandal@microchip.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "pic32mzda.dtsi" + +/ { + model = "Microchip PIC32MZDASK"; + compatible = "microchip,pic32mzdask", "microchip,pic32mzda"; + + aliases { + console = &uart2; + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&clock { + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart2 { + status = "okay"; + u-boot,dm-pre-reloc; +}; diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig index f636266adbe..2e38bb7ecaf 100644 --- a/arch/mips/mach-pic32/Kconfig +++ b/arch/mips/mach-pic32/Kconfig @@ -19,4 +19,17 @@ config SOC_PIC32MZDA endchoice +choice + prompt "Board select" + +config TARGET_PIC32MZDASK + bool "Microchip PIC32MZ[DA] Starter Kit" + depends on SOC_PIC32MZDA + help + This supports Microchip PIC32MZ[DA] Starter Kit. + +endchoice + +source "board/microchip/pic32mzda/Kconfig" + endmenu diff --git a/board/microchip/pic32mzda/Kconfig b/board/microchip/pic32mzda/Kconfig new file mode 100644 index 00000000000..8acb3933698 --- /dev/null +++ b/board/microchip/pic32mzda/Kconfig @@ -0,0 +1,13 @@ + +if TARGET_PIC32MZDASK + +config SYS_BOARD + default "pic32mzda" + +config SYS_VENDOR + default "microchip" + +config SYS_CONFIG_NAME + default "pic32mzdask" + +endif diff --git a/board/microchip/pic32mzda/MAINTAINERS b/board/microchip/pic32mzda/MAINTAINERS new file mode 100644 index 00000000000..c934f1a1f55 --- /dev/null +++ b/board/microchip/pic32mzda/MAINTAINERS @@ -0,0 +1,6 @@ +PIC32MZDASK BOARD +M: Purna Chandra Mandal <purna.mandal@microchip.com> +S: Maintained +F: board/microchip/pic32mzda/ +F: include/configs/pic32mzdask.h +F: configs/pic32mzdask_defconfig diff --git a/board/microchip/pic32mzda/Makefile b/board/microchip/pic32mzda/Makefile new file mode 100644 index 00000000000..36295302a17 --- /dev/null +++ b/board/microchip/pic32mzda/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2015 +# Purna Chandra Mandal, purna.mandal@microchip.com. +# +# SPDX-License-Identifier: GPL-2.0+ +# +obj-y := pic32mzda.o diff --git a/board/microchip/pic32mzda/README b/board/microchip/pic32mzda/README new file mode 100644 index 00000000000..91d16ab7dcf --- /dev/null +++ b/board/microchip/pic32mzda/README @@ -0,0 +1,22 @@ +/* + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> + */ + +PIC32MZ[DA] Starter Kit +---------------------------------------- +PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller. +This family is powered by MIPS M14KEC 32bit general purpose core and has +advanced microcontroller features and peripherals. + +This processor boots with proprietary stage1 bootloader running from internal +boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed +on internal program-flash. Finally U-Boot loads OS image (along with other +required files for booting) from either uSD card, or ethernet, or from USB +storage. + +To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot +environment file), uImage, *.dtb (platform device-tree-blob file). + +U-Boot jumps to Linux using UHI specification. + +Visit http://microchip.com for details. diff --git a/board/microchip/pic32mzda/pic32mzda.c b/board/microchip/pic32mzda/pic32mzda.c new file mode 100644 index 00000000000..afe2ab8b713 --- /dev/null +++ b/board/microchip/pic32mzda/pic32mzda.c @@ -0,0 +1,31 @@ +/* + * Microchip PIC32MZ[DA] Starter Kit board + * + * Copyright (C) 2015, Microchip Technology Inc. + * Purna Chandra Mandal <purna.mandal@microchip.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include <dm.h> +#include <clk.h> +#include <mach/pic32.h> + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + ulong rate = 0; + struct udevice *dev; + + printf("Core: %s\n", get_core_name()); + + if (!uclass_get_device(UCLASS_CLK, 0, &dev)) { + rate = clk_get_rate(dev); + printf("CPU Speed: %lu MHz\n", rate / 1000000); + } + + return 0; +} +#endif diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig new file mode 100644 index 00000000000..1c968fc73eb --- /dev/null +++ b/configs/pic32mzdask_defconfig @@ -0,0 +1,30 @@ +CONFIG_MIPS=y +CONFIG_SYS_MALLOC_F_LEN=0x600 +CONFIG_DM_SERIAL=y +CONFIG_DM_GPIO=y +CONFIG_MACH_PIC32=y +# CONFIG_MIPS_BOOT_ENV_LEGACY is not set +CONFIG_MIPS_BOOT_FDT=y +CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk" +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="dask # " +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_SAVEENV is not set +CONFIG_LOOPW=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MEMINFO=y +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +CONFIG_CMD_TIME=y +CONFIG_OF_EMBED=y +CONFIG_CLK=y +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_FULL is not set +CONFIG_SYS_VSNPRINTF=y +CONFIG_USE_TINY_PRINTF=y +CONFIG_REGEX=y +CONFIG_CMD_DHRYSTONE=y diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h new file mode 100644 index 00000000000..5ba2a19c607 --- /dev/null +++ b/include/configs/pic32mzdask.h @@ -0,0 +1,93 @@ +/* + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Microchip PIC32MZ[DA] Starter Kit. + */ + +#ifndef __PIC32MZDASK_CONFIG_H +#define __PIC32MZDASK_CONFIG_H + +/* System Configuration */ +#define CONFIG_SYS_TEXT_BASE 0x9d004000 /* .text */ +#define CONFIG_DISPLAY_BOARDINFO + +/*-------------------------------------------- + * CPU configuration + */ +/* CPU Timer rate */ +#define CONFIG_SYS_MIPS_TIMER_FREQ 100000000 + +/* Cache Configuration */ +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT + +/*---------------------------------------------------------------------- + * Memory Layout + */ +#define CONFIG_SYS_SRAM_BASE 0x80000000 +#define CONFIG_SYS_SRAM_SIZE 0x00080000 /* 512K */ + +/* Initial RAM for temporary stack, global data */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CONFIG_SYS_INIT_RAM_ADDR \ + (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) + +/* SDRAM Configuration (for final code, data, stack, heap) */ +#define CONFIG_SYS_SDRAM_BASE 0x88000000 +#define CONFIG_SYS_MALLOC_LEN (256 << 10) +#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10) +#define CONFIG_STACKSIZE (4 << 10) /* regular stack */ + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 << 10) + +#define CONFIG_SYS_LOAD_ADDR 0x88500000 /* default load address */ +#define CONFIG_SYS_ENV_ADDR 0x88300000 + +/* Memory Test */ +#define CONFIG_SYS_MEMTEST_START 0x88000000 +#define CONFIG_SYS_MEMTEST_END 0x88080000 + +/*---------------------------------------------------------------------- + * Commands + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMD_CLK + +/*------------------------------------------------- + * FLASH configuration + */ +#define CONFIG_SYS_NO_FLASH + +/*------------------------------------------------------------ + * Console Configuration + */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_CMDLINE_EDITING 1 + +/* + * Handover flattened device tree (dtb file) to Linux kernel + */ +#define CONFIG_OF_LIBFDT 1 + +/* ------------------------------------------------- + * Environment + */ +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x4000 + +/* --------------------------------------------------------------------- + * Board boot configuration + */ +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#define CONFIG_BOOTDELAY 5 /* autoboot after X seconds */ +#undef CONFIG_BOOTARGS + +#endif /* __PIC32MZDASK_CONFIG_H */ |