diff options
-rw-r--r-- | arch/x86/cpu/tangier/Kconfig | 4 | ||||
-rw-r--r-- | arch/x86/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/x86/dts/edison.dts | 89 | ||||
-rw-r--r-- | board/intel/Kconfig | 8 | ||||
-rw-r--r-- | board/intel/edison/Kconfig | 26 | ||||
-rw-r--r-- | board/intel/edison/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/intel/edison/Makefile | 7 | ||||
-rw-r--r-- | board/intel/edison/config.mk | 18 | ||||
-rw-r--r-- | board/intel/edison/edison.c | 104 | ||||
-rw-r--r-- | board/intel/edison/start.S | 13 | ||||
-rw-r--r-- | configs/edison_defconfig | 53 | ||||
-rw-r--r-- | doc/README.x86 | 39 | ||||
-rw-r--r-- | include/configs/edison.h | 61 |
13 files changed, 429 insertions, 0 deletions
diff --git a/arch/x86/cpu/tangier/Kconfig b/arch/x86/cpu/tangier/Kconfig index 92d3352f3b0..b67c6a799e2 100644 --- a/arch/x86/cpu/tangier/Kconfig +++ b/arch/x86/cpu/tangier/Kconfig @@ -18,3 +18,7 @@ config SYS_CAR_SIZE help Space in bytes in eSRAM used as Cache-As-RAM (CAR). Note this size must not exceed eSRAM's total size. + +config SYS_USB_OTG_BASE + hex + default 0xf9100000 diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile index 3f534ad40a6..6589495f231 100644 --- a/arch/x86/dts/Makefile +++ b/arch/x86/dts/Makefile @@ -10,6 +10,7 @@ dtb-y += bayleybay.dtb \ cougarcanyon2.dtb \ crownbay.dtb \ dfi-bt700-q7x-151.dtb \ + edison.dtb \ efi.dtb \ galileo.dtb \ minnowmax.dtb \ diff --git a/arch/x86/dts/edison.dts b/arch/x86/dts/edison.dts new file mode 100644 index 00000000000..0b04984c6ea --- /dev/null +++ b/arch/x86/dts/edison.dts @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2017 Intel Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include <dt-bindings/gpio/x86-gpio.h> +#include <dt-bindings/interrupt-router/intel-irq.h> + +/include/ "skeleton.dtsi" +/include/ "rtc.dtsi" +/include/ "tsc_timer.dtsi" + +/ { + model = "Intel Edison"; + compatible = "intel,edison"; + + aliases { + serial0 = &serial0; + }; + + chosen { + stdout-path = &serial0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "cpu-x86"; + reg = <0>; + intel,apic-id = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "cpu-x86"; + reg = <1>; + intel,apic-id = <2>; + }; + }; + + pci { + compatible = "pci-x86"; + #address-cells = <3>; + #size-cells = <2>; + u-boot,dm-pre-reloc; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000 + 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 + 0x01000000 0x0 0x2000 0x2000 0 0xe000>; + }; + + serial0: serial@ff010180 { + compatible = "intel,mid-uart"; + reg = <0xff010180 0x100>; + reg-shift = <0>; + clock-frequency = <29491200>; + current-speed = <115200>; + }; + + emmc: mmc@ff3fc000 { + compatible = "intel,sdhci-tangier"; + reg = <0xff3fc000 0x1000>; + }; + +/* + * FIXME: For now U-Boot DM model doesn't allow to power up this controller. + * Enabling it will make U-Boot hang. + * + sdcard: mmc@ff3fa000 { + compatible = "intel,sdhci-tangier"; + reg = <0xff3fa000 0x1000>; + }; + */ + + pmu: power@ff00b000 { + compatible = "intel,pmu-mid"; + reg = <0xff00b000 0x1000>; + }; + + scu: ipc@ff009000 { + compatible = "intel,scu-ipc"; + reg = <0xff009000 0x1000>; + }; +}; diff --git a/board/intel/Kconfig b/board/intel/Kconfig index 4d341aa7991..d7d950e8771 100644 --- a/board/intel/Kconfig +++ b/board/intel/Kconfig @@ -35,6 +35,13 @@ config TARGET_CROWNBAY Intel Platform Controller Hub EG20T, other system components and peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS. +config TARGET_EDISON + bool "Edison" + help + This is the Intel Edison Compute Module. It contains a dual core Intel + Atom Tangier CPU, 1 GB RAM integrated on package. There is also 4 GB + eMMC flash on board, Wi-Fi, Bluetooth 4 and USB controllers. + config TARGET_GALILEO bool "Galileo" help @@ -64,6 +71,7 @@ endchoice source "board/intel/bayleybay/Kconfig" source "board/intel/cougarcanyon2/Kconfig" source "board/intel/crownbay/Kconfig" +source "board/intel/edison/Kconfig" source "board/intel/galileo/Kconfig" source "board/intel/minnowmax/Kconfig" diff --git a/board/intel/edison/Kconfig b/board/intel/edison/Kconfig new file mode 100644 index 00000000000..4ff9d5adece --- /dev/null +++ b/board/intel/edison/Kconfig @@ -0,0 +1,26 @@ +if TARGET_EDISON + +config SYS_BOARD + default "edison" + +config SYS_VENDOR + default "intel" + +config SYS_SOC + default "tangier" + +config SYS_CONFIG_NAME + default "edison" + +config SYS_TEXT_BASE + default 0x01101000 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select X86_LOAD_FROM_32_BIT + select INTEL_MID + select INTEL_TANGIER + select BOARD_LATE_INIT + select MD5 + +endif diff --git a/board/intel/edison/MAINTAINERS b/board/intel/edison/MAINTAINERS new file mode 100644 index 00000000000..4bc4a00c8ad --- /dev/null +++ b/board/intel/edison/MAINTAINERS @@ -0,0 +1,6 @@ +Intel Edison Board +M: Andy Shevchenko <andriy.shevchenko@linux.intel.com> +S: Maintained +F: board/intel/edison +F: include/configs/edison.h +F: configs/edison_defconfig diff --git a/board/intel/edison/Makefile b/board/intel/edison/Makefile new file mode 100644 index 00000000000..dde159435b3 --- /dev/null +++ b/board/intel/edison/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2017 Intel Corporation +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += start.o edison.o diff --git a/board/intel/edison/config.mk b/board/intel/edison/config.mk new file mode 100644 index 00000000000..465133fd770 --- /dev/null +++ b/board/intel/edison/config.mk @@ -0,0 +1,18 @@ +# +# Copyright (c) 2011 The Chromium OS Authors. All rights reserved. +# Copyright (c) 2017 Intel Corporation +# +# SPDX-License-Identifier: GPL-2.0 BSD-3-Clause +# + +# Add 4096 bytes of zeroes to u-boot.bin +quiet_cmd_mkalign_eds = EDSALGN $@ +cmd_mkalign_eds = \ + dd if=$^ of=$@ bs=4k seek=1 2>/dev/null && \ + mv $@ $^ + +ALL-y += u-boot-align.bin +u-boot-align.bin: u-boot.bin + $(call if_changed,mkalign_eds) + +HOSTCFLAGS_autoconf.mk.dep = -Wno-variadic-macros diff --git a/board/intel/edison/edison.c b/board/intel/edison/edison.c new file mode 100644 index 00000000000..a1a7d4d7c89 --- /dev/null +++ b/board/intel/edison/edison.c @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2017 Intel Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <dwc3-uboot.h> +#include <mmc.h> +#include <u-boot/md5.h> +#include <usb.h> +#include <watchdog.h> + +#include <linux/usb/gadget.h> + +#include <asm/cache.h> +#include <asm/scu.h> +#include <asm/u-boot-x86.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct dwc3_device dwc3_device_data = { + .maximum_speed = USB_SPEED_HIGH, + .base = CONFIG_SYS_USB_OTG_BASE, + .dr_mode = USB_DR_MODE_PERIPHERAL, + .index = 0, +}; + +int usb_gadget_handle_interrupts(int controller_index) +{ + dwc3_uboot_handle_interrupt(controller_index); + WATCHDOG_RESET(); + return 0; +} + +int board_usb_init(int index, enum usb_init_type init) +{ + if (index == 0 && init == USB_INIT_DEVICE) + return dwc3_uboot_init(&dwc3_device_data); + return -EINVAL; +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + if (index == 0 && init == USB_INIT_DEVICE) { + dwc3_uboot_exit(index); + return 0; + } + return -EINVAL; +} + +static void assign_serial(void) +{ + struct mmc *mmc = find_mmc_device(0); + unsigned char ssn[16]; + char usb0addr[18]; + char serial[33]; + int i; + + if (!mmc) + return; + + md5((unsigned char *)mmc->cid, sizeof(mmc->cid), ssn); + + snprintf(usb0addr, sizeof(usb0addr), "02:00:86:%02x:%02x:%02x", + ssn[13], ssn[14], ssn[15]); + setenv("usb0addr", usb0addr); + + for (i = 0; i < 16; i++) + snprintf(&serial[2 * i], 3, "%02x", ssn[i]); + setenv("serial#", serial); + +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) + saveenv(); +#endif +} + +static void assign_hardware_id(void) +{ + struct ipc_ifwi_version v; + char hardware_id[4]; + int ret; + + ret = scu_ipc_command(IPCMSG_GET_FW_REVISION, 1, NULL, 0, (u32 *)&v, 4); + if (ret < 0) + printf("Can't retrieve hardware revision\n"); + + snprintf(hardware_id, sizeof(hardware_id), "%02X", v.hardware_id); + setenv("hardware_id", hardware_id); + +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) + saveenv(); +#endif +} + +int board_late_init(void) +{ + if (!getenv("serial#")) + assign_serial(); + + if (!getenv("hardware_id")) + assign_hardware_id(); + + return 0; +} diff --git a/board/intel/edison/start.S b/board/intel/edison/start.S new file mode 100644 index 00000000000..932fe6c24bf --- /dev/null +++ b/board/intel/edison/start.S @@ -0,0 +1,13 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* board early intialization */ +.globl early_board_init +early_board_init: + /* No 32-bit board specific initialisation */ + jmp early_board_init_ret diff --git a/configs/edison_defconfig b/configs/edison_defconfig new file mode 100644 index 00000000000..f33b35c8d26 --- /dev/null +++ b/configs/edison_defconfig @@ -0,0 +1,53 @@ +CONFIG_X86=y +CONFIG_VENDOR_INTEL=y +CONFIG_DEFAULT_DEVICE_TREE="edison" +CONFIG_TARGET_EDISON=y +CONFIG_SMP=y +# CONFIG_ARCH_EARLY_INIT_R is not set +# CONFIG_BOARD_EARLY_INIT_F is not set +CONFIG_HUSH_PARSER=y +CONFIG_CMD_CPU=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_ASKENV=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_ENV_CALLBACK=y +CONFIG_CMD_ENV_FLAGS=y +CONFIG_CMD_MEMINFO=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_NFS is not set +CONFIG_CMD_TIMER=y +CONFIG_CMD_HASH=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y +CONFIG_CPU=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_MMC=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_TANGIER=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_DM_RTC=y +CONFIG_INTEL_MID_SERIAL=y +CONFIG_TIMER=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Intel" +CONFIG_G_DNL_VENDOR_NUM=0x8087 +CONFIG_G_DNL_PRODUCT_NUM=0x0a99 +CONFIG_TANGIER_WATCHDOG=y +CONFIG_FAT_WRITE=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SHA1=y diff --git a/doc/README.x86 b/doc/README.x86 index c69dc1c5113..8025485cf13 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -18,6 +18,8 @@ U-Boot supports running as a coreboot [1] payload on x86. So far only Link work with minimal adjustments on other x86 boards since coreboot deals with most of the low-level details. +U-Boot is a main bootloader on Intel Edison board. + U-Boot also supports booting directly from x86 reset vector, without coreboot. In this case, known as bare mode, from the fact that it runs on the 'bare metal', U-Boot acts like a BIOS replacement. The following platforms @@ -61,6 +63,16 @@ Change the 'Board configuration file' and 'Board Device Tree Source (dts) file' to point to a new board. You can also change the Cache-As-RAM (CAR) related settings here if the default values do not fit your new board. +Build Instructions for U-Boot as main bootloader +------------------------------------------------ + +Intel Edison instructions: + +Simple you can build U-Boot and obtain u-boot.bin + +$ make edison_defconfig +$ make all + Build Instructions for U-Boot as BIOS replacement (bare mode) ------------------------------------------------------------- Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a @@ -455,6 +467,33 @@ Here the kernel (bzImage) is loaded to 01000000 and initrd is to 04000000. Then, => zboot 01000000 - 04000000 1b1ab50 +Updating U-Boot on Edison +------------------------- +By default Intel Edison boards are shipped with preinstalled heavily +patched U-Boot v2014.04. Though it supports DFU which we may be able to +use. + +1. Prepare u-boot.bin as described in chapter above. You still need one +more step (if and only if you have original U-Boot), i.e. run the +following command: + +$ truncate -s %4096 u-boot.bin + +2. Run your board and interrupt booting to U-Boot console. In the console +call: + + => run do_force_flash_os + +3. Wait for few seconds, it will prepare environment variable and runs +DFU. Run DFU command from the host system: + +$ dfu-util -v -d 8087:0a99 --alt u-boot0 -D u-boot.bin + +4. Return to U-Boot console and following hint. i.e. push Ctrl+C, and +reset the board: + + => reset + CPU Microcode ------------- Modern CPUs usually require a special bit stream called microcode [8] to be diff --git a/include/configs/edison.h b/include/configs/edison.h new file mode 100644 index 00000000000..03aa7023061 --- /dev/null +++ b/include/configs/edison.h @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2017 Intel Corp. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/ibmpc.h> + +/* Boot */ +#define CONFIG_CMD_ZBOOT +#define CONFIG_BOOTCOMMAND "run bootcmd" + +/* DISK Partition support */ +#define CONFIG_RANDOM_UUID + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP + +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 128 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_AUTO_COMPLETE + +/* Memory */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 +#define CONFIG_PHYSMEM + +#define CONFIG_NR_DRAM_BANKS 3 + +#define CONFIG_SYS_STACK_SIZE (32 * 1024) + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) + +#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024) + +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x01000000 + +/* Environment */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 0 +#define CONFIG_ENV_SIZE (64 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) +#define CONFIG_ENV_OFFSET_REDUND (6 * 1024 * 1024) +#define CONFIG_SUPPORT_EMMC_BOOT + +/* PCI */ +#define CONFIG_CMD_PCI + +/* RTC */ +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 +#define CONFIG_RTC_MC146818 + +#endif |