aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Kconfig27
-rw-r--r--common/spl/Kconfig26
-rw-r--r--drivers/Makefile3
-rw-r--r--drivers/usb/gadget/Makefile8
-rw-r--r--include/configs/dra7xx_evm.h1
-rw-r--r--scripts/Makefile.spl3
6 files changed, 35 insertions, 33 deletions
diff --git a/Kconfig b/Kconfig
index f3a9f73dd0f..529858a79da 100644
--- a/Kconfig
+++ b/Kconfig
@@ -292,33 +292,6 @@ config FIT_IMAGE_POST_PROCESS
injected into the FIT creation (i.e. the blobs would have been pre-
processed before being added to the FIT image).
-config SPL_DFU_SUPPORT
- bool "Enable SPL with DFU to load binaries to memory device"
- depends on USB
- help
- Currently the SPL does not have capability to load the
- binaries or boot images to boot devices like ram,eMMC,SPI,etc.
- This feature enables the DFU (Device Firmware Upgarde) in SPL with
- RAM memory device support. The ROM code will load and execute
- the SPL built with dfu. The user can load binaries (u-boot/kernel) to
- selected device partition from host-pc using dfu-utils.
- This feature will be useful to flash the binaries to factory
- or bare-metal boards using USB interface.
-
-choice
- bool "DFU device selection"
- depends on SPL_DFU_SUPPORT
-
-config SPL_DFU_RAM
- bool "RAM device"
- depends on SPL_DFU_SUPPORT
- help
- select RAM/DDR memory device for loading binary images
- (u-boot/kernel) to the selected device partition using
- DFU and execute the u-boot/kernel from RAM.
-
-endchoice
-
config SYS_CLK_FREQ
depends on ARC || ARCH_SUNXI
int "CPU clock frequency"
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index df9e0ce68f9..77eadf92fe0 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -524,6 +524,32 @@ config SPL_USB_SUPPORT
config options. This enables loading from USB using a configured
device.
+config SPL_DFU_SUPPORT
+ bool "Support DFU (Device Firmware Upgarde)"
+ depends on SPL
+ select SPL_HASH_SUPPORT
+ help
+ This feature enables the DFU (Device Firmware Upgarde) in SPL with
+ RAM memory device support. The ROM code will load and execute
+ the SPL built with dfu. The user can load binaries (u-boot/kernel) to
+ selected device partition from host-pc using dfu-utils.
+ This feature is useful to flash the binaries to factory or bare-metal
+ boards using USB interface.
+
+choice
+ bool "DFU device selection"
+ depends on SPL_DFU_SUPPORT
+
+config SPL_DFU_RAM
+ bool "RAM device"
+ depends on SPL_DFU_SUPPORT
+ help
+ select RAM/DDR memory device for loading binary images
+ (u-boot/kernel) to the selected device partition using
+ DFU and execute the u-boot/kernel from RAM.
+
+endchoice
+
config SPL_WATCHDOG_SUPPORT
bool "Support watchdog drivers"
depends on SPL
diff --git a/drivers/Makefile b/drivers/Makefile
index 761d0b3e85b..40aba582629 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -34,6 +34,9 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/udc/
+obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index acc9964e232..5b18e8c1950 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -8,6 +8,10 @@
obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o
+endif
+
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
@@ -18,13 +22,13 @@ obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
obj-$(CONFIG_CI_UDC) += ci_udc.o
obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
-obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o
-endif
obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o
obj-$(CONFIG_USB_FUNCTION_FASTBOOT) += f_fastboot.o
endif
+endif
ifdef CONFIG_USB_ETHER
obj-y += ether.o
obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 1834d04afde..75a78542045 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -134,7 +134,6 @@
#undef CONFIG_CMD_BOOTD
#ifdef CONFIG_SPL_DFU_SUPPORT
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
-#define CONFIG_SPL_HASH_SUPPORT
#define DFU_ALT_INFO_RAM \
"dfu_alt_info_ram=" \
"kernel ram 0x80200000 0x4000000;" \
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 03a2f061a46..23b3997076f 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -66,9 +66,6 @@ endif
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
libs-y += drivers/
-libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/dfu/
-libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/
-libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/udc/
libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/dwc3/
libs-y += dts/
libs-y += fs/