diff options
| -rw-r--r-- | board/liebherr/xea/boot_img_scr.h | 27 | ||||
| -rw-r--r-- | board/liebherr/xea/xea.c | 85 |
2 files changed, 112 insertions, 0 deletions
diff --git a/board/liebherr/xea/boot_img_scr.h b/board/liebherr/xea/boot_img_scr.h new file mode 100644 index 00000000000..baa3072b49c --- /dev/null +++ b/board/liebherr/xea/boot_img_scr.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Struct for boot image source description for placing in last + * two SPI NOR flash sectors on legcom. + */ + +struct boot_img_src { + u8 magic; /* Must be 'B' = 0x42 */ + u8 flags; /* flags to specify mmcblk[0|1] boot[0|1] */ + u8 crc8; /* CRC-8 over above two bytes */ +} __packed; + +/* + * Bit definition in boot_img_src.flags: + * Bit 0: mmcblk device 0 or 1 (1 - if this bit set) + * Bit 1: mmcblk boot partition 0 or 1. + * for eMMC: boot0 if this bit is cleared, boot1 - if set + * for SD-card the boot partition value will always be 0 + * (independent of the value of this bit) + * + */ +#define BOOT_SRC_MMC1 BIT(0) +#define BOOT_SRC_PART1 BIT(1) + +/* Offset of the first boot image source descriptor in SPI NOR */ +#define SPI_FLASH_BOOT_SRC_OFFS 0xFE0000 +#define SPI_FLASH_SECTOR_SIZE 0x10000 diff --git a/board/liebherr/xea/xea.c b/board/liebherr/xea/xea.c index e4d2eb65cc4..c8ac526cb47 100644 --- a/board/liebherr/xea/xea.c +++ b/board/liebherr/xea/xea.c @@ -32,6 +32,11 @@ #include <errno.h> #include <usb.h> #include <serial.h> +#include <u-boot/crc.h> +#include "boot_img_scr.h" + +#include <spi.h> +#include <spi_flash.h> #ifdef CONFIG_SPL_BUILD #include <spl.h> @@ -66,6 +71,52 @@ void board_init_f(ulong arg) preloader_console_init(); } +static struct boot_img_src img_src[2]; +static int spi_load_boot_info(void) +{ + struct spi_flash *flash; + int err; + + flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, + CONFIG_SF_DEFAULT_CS, + CONFIG_SF_DEFAULT_SPEED, + CONFIG_SF_DEFAULT_MODE); + if (!flash) { + printf("%s: SPI probe err\n", __func__); + return -ENODEV; + } + + /* + * Load both boot info structs from SPI flash + */ + err = spi_flash_read(flash, SPI_FLASH_BOOT_SRC_OFFS, + sizeof(img_src[0]), + (void *)&img_src[0]); + if (err) { + debug("%s: First boot info NOR sector read error %d\n", + __func__, err); + return err; + } + + err = spi_flash_read(flash, + SPI_FLASH_BOOT_SRC_OFFS + SPI_FLASH_SECTOR_SIZE, + sizeof(img_src[0]), + (void *)&img_src[1]); + if (err) { + debug("%s: First boot info NOR sector read error %d\n", + __func__, err); + return err; + } + + debug("%s: BI0 0x%x 0x%x 0x%x\n", __func__, + img_src[0].magic, img_src[0].flags, img_src[0].crc8); + + debug("%s: BI1 0x%x 0x%x 0x%x\n", __func__, + img_src[1].magic, img_src[1].flags, img_src[1].crc8); + + return 0; +} + static int boot_tiva0, boot_tiva1; /* Check if TIVAs request booting via U-Boot proper */ @@ -114,6 +165,40 @@ void spl_board_init(void) boot_tiva1 = dm_gpio_get_value(&btiva1); } +int spl_mmc_emmc_boot_partition(struct mmc *mmc) +{ + int i, src_idx = -1, ret; + + ret = spi_load_boot_info(); + if (ret) { + printf("%s: Cannot read XEA boot info! [%d]\n", __func__, ret); + /* To avoid bricking board - by default boot from boot0 eMMC */ + return 1; + } + + for (i = 0; i < 2; i++) { + if (img_src[i].magic == 'B' && + img_src[i].crc8 == crc8(0, &img_src[i].magic, 2)) { + src_idx = i; + break; + } + } + + debug("%s: src idx: %d\n", __func__, src_idx); + + if (src_idx < 0) + /* + * Always use eMMC (mmcblkX) boot0 if no + * valid image source description found + */ + return 1; + + if (img_src[src_idx].flags & BOOT_SRC_PART1) + return 2; + + return 1; +} + void board_boot_order(u32 *spl_boot_list) { spl_boot_list[0] = BOOT_DEVICE_MMC1; |