diff options
| -rw-r--r-- | arch/mips/dts/mt7628a.dtsi | 36 |
1 files changed, 24 insertions, 12 deletions
diff --git a/arch/mips/dts/mt7628a.dtsi b/arch/mips/dts/mt7628a.dtsi index 44fbbd5b25f..b0e0ed7ec88 100644 --- a/arch/mips/dts/mt7628a.dtsi +++ b/arch/mips/dts/mt7628a.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/mt7628-clk.h> +#include <dt-bindings/reset/mt7628-reset.h> / { #address-cells = <1>; @@ -17,11 +18,6 @@ }; }; - resetc: reset-controller { - compatible = "ralink,rt2880-reset"; - #reset-cells = <1>; - }; - cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; @@ -57,6 +53,12 @@ u-boot,dm-pre-reloc; }; + rstctrl: rstctrl@0x34 { + reg = <0x34 0x4>; + compatible = "mediatek,mtmips-reset"; + #reset-cells = <1>; + }; + pinctrl: pinctrl@60 { compatible = "mediatek,mt7628-pinctrl"; reg = <0x3c 0x2c>, <0x1300 0x100>; @@ -211,7 +213,7 @@ compatible = "ralink,mt7628a-wdt", "mediatek,mt7621-wdt"; reg = <0x100 0x30>; - resets = <&resetc 8>; + resets = <&rstctrl MT7628_TIMER_RST>; reset-names = "wdt"; interrupt-parent = <&intc>; @@ -225,7 +227,7 @@ interrupt-controller; #interrupt-cells = <1>; - resets = <&resetc 9>; + resets = <&rstctrl MT7628_INT_RST>; reset-names = "intc"; interrupt-parent = <&cpuintc>; @@ -248,6 +250,9 @@ compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio"; reg = <0x600 0x100>; + resets = <&rstctrl MT7628_PIO_RST>; + reset-names = "pio"; + interrupt-parent = <&intc>; interrupts = <6>; @@ -276,6 +281,10 @@ spi0: spi@b00 { compatible = "ralink,mt7621-spi"; reg = <0xb00 0x40>; + + resets = <&rstctrl MT7628_SPI_RST>; + reset-names = "spi"; + #address-cells = <1>; #size-cells = <0>; @@ -291,7 +300,7 @@ clocks = <&clkctrl CLK_UART0>; - resets = <&resetc 12>; + resets = <&rstctrl MT7628_UART0_RST>; reset-names = "uart0"; interrupt-parent = <&intc>; @@ -309,7 +318,7 @@ clocks = <&clkctrl CLK_UART1>; - resets = <&resetc 19>; + resets = <&rstctrl MT7628_UART1_RST>; reset-names = "uart1"; interrupt-parent = <&intc>; @@ -327,7 +336,7 @@ clocks = <&clkctrl CLK_UART2>; - resets = <&resetc 20>; + resets = <&rstctrl MT7628_UART2_RST>; reset-names = "uart2"; interrupt-parent = <&intc>; @@ -342,6 +351,9 @@ reg = <0x10100000 0x10000 0x10110000 0x8000>; + resets = <&rstctrl MT7628_EPHY_RST>; + reset-names = "ephy"; + syscon = <&sysc>; }; @@ -353,8 +365,8 @@ ralink,sysctl = <&sysc>; - resets = <&resetc 22 &resetc 25>; - reset-names = "host", "device"; + resets = <&rstctrl MT7628_UPHY_RST>; + reset-names = "phy"; clocks = <&clkctrl CLK_UPHY>; clock-names = "cg"; |