diff options
31 files changed, 1599 insertions, 209 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 153698a6b8c..abf9a027cce 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -942,6 +942,8 @@ dtb-$(CONFIG_STM32MP15x) += \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ + stm32mp157c-odyssey.dtb \ + stm32mp15xx-dhcom-drc02.dtb \ stm32mp15xx-dhcom-pdk2.dtb \ stm32mp15xx-dhcor-avenger96.dtb diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi index c385896ebcf..e9525b5d064 100644 --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -6,7 +6,7 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { - adc1_in6_pins_a: adc1-in6 { + adc1_in6_pins_a: adc1-in6-0 { pins { pinmux = <STM32_PINMUX('F', 12, ANALOG)>; }; @@ -21,6 +21,13 @@ }; }; + adc12_ain_pins_b: adc12-ain-1 { + pins { + pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>; /* ADC2 in2 */ + }; + }; + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { pins { pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ @@ -37,7 +44,7 @@ }; }; - cec_pins_sleep_a: cec-sleep-0 { + cec_sleep_pins_a: cec-sleep-0 { pins { pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ }; @@ -52,19 +59,19 @@ }; }; - cec_pins_sleep_b: cec-sleep-1 { + cec_sleep_pins_b: cec-sleep-1 { pins { pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ }; }; - dac_ch1_pins_a: dac-ch1 { + dac_ch1_pins_a: dac-ch1-0 { pins { pinmux = <STM32_PINMUX('A', 4, ANALOG)>; }; }; - dac_ch2_pins_a: dac-ch2 { + dac_ch2_pins_a: dac-ch2-0 { pins { pinmux = <STM32_PINMUX('A', 5, ANALOG)>; }; @@ -142,7 +149,7 @@ }; }; - ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ @@ -166,6 +173,57 @@ pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_b: rgmii-sleep-1 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + ethernet0_rgmii_pins_c: rgmii-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ @@ -193,7 +251,7 @@ }; }; - ethernet0_rgmii_pins_sleep_b: rgmii-sleep-1 { + ethernet0_rgmii_sleep_pins_c: rgmii-sleep-2 { pins1 { pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ @@ -233,7 +291,7 @@ }; }; - ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { + ethernet0_rmii_sleep_pins_a: rmii-sleep-0 { pins1 { pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ @@ -301,14 +359,14 @@ }; }; - i2c1_pins_sleep_a: i2c1-1 { + i2c1_sleep_pins_a: i2c1-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ }; }; - i2c1_pins_b: i2c1-2 { + i2c1_pins_b: i2c1-1 { pins { pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ @@ -318,7 +376,7 @@ }; }; - i2c1_pins_sleep_b: i2c1-3 { + i2c1_sleep_pins_b: i2c1-sleep-1 { pins { pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ @@ -335,14 +393,14 @@ }; }; - i2c2_pins_sleep_a: i2c2-1 { + i2c2_sleep_pins_a: i2c2-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ }; }; - i2c2_pins_b1: i2c2-2 { + i2c2_pins_b1: i2c2-1 { pins { pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ bias-disable; @@ -351,13 +409,13 @@ }; }; - i2c2_pins_sleep_b1: i2c2-3 { + i2c2_sleep_pins_b1: i2c2-sleep-1 { pins { pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ }; }; - i2c2_pins_c: i2c2-4 { + i2c2_pins_c: i2c2-2 { pins { pinmux = <STM32_PINMUX('F', 1, AF4)>, /* I2C2_SCL */ <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ @@ -367,7 +425,7 @@ }; }; - i2c2_pins_sleep_c: i2c2-5 { + i2c2_pins_sleep_c: i2c2-sleep-2 { pins { pinmux = <STM32_PINMUX('F', 1, ANALOG)>, /* I2C2_SCL */ <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ @@ -384,7 +442,7 @@ }; }; - i2c5_pins_sleep_a: i2c5-1 { + i2c5_sleep_pins_a: i2c5-sleep-0 { pins { pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ @@ -392,6 +450,23 @@ }; }; + i2c5_pins_b: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_sleep_pins_b: i2c5-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */ + }; + }; + i2s2_pins_a: i2s2-0 { pins { pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ @@ -403,7 +478,7 @@ }; }; - i2s2_pins_sleep_a: i2s2-1 { + i2s2_sleep_pins_a: i2s2-sleep-0 { pins { pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ @@ -411,7 +486,7 @@ }; }; - ltdc_pins_a: ltdc-a-0 { + ltdc_pins_a: ltdc-0 { pins { pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ @@ -447,7 +522,7 @@ }; }; - ltdc_pins_sleep_a: ltdc-a-1 { + ltdc_sleep_pins_a: ltdc-sleep-0 { pins { pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ @@ -480,7 +555,7 @@ }; }; - ltdc_pins_b: ltdc-b-0 { + ltdc_pins_b: ltdc-1 { pins { pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ @@ -516,7 +591,7 @@ }; }; - ltdc_pins_sleep_b: ltdc-b-1 { + ltdc_sleep_pins_b: ltdc-sleep-1 { pins { pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ @@ -549,6 +624,142 @@ }; }; + ltdc_pins_c: ltdc-2 { + pins1 { + pinmux = <STM32_PINMUX('B', 1, AF9)>, /* LTDC_R6 */ + <STM32_PINMUX('B', 9, AF14)>, /* LTDC_B7 */ + <STM32_PINMUX('C', 0, AF14)>, /* LTDC_R5 */ + <STM32_PINMUX('D', 3, AF14)>, /* LTDC_G7 */ + <STM32_PINMUX('D', 6, AF14)>, /* LTDC_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */ + <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */ + <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */ + <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */ + <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */ + <STM32_PINMUX('H', 4, AF9)>, /* LTDC_G5 */ + <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */ + <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */ + <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */ + <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */ + <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */ + <STM32_PINMUX('I', 6, AF14)>, /* LTDC_B6 */ + <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */ + <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_sleep_pins_c: ltdc-sleep-2 { + pins1 { + pinmux = <STM32_PINMUX('B', 1, ANALOG)>, /* LTDC_R6 */ + <STM32_PINMUX('B', 9, ANALOG)>, /* LTDC_B7 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LTDC_R5 */ + <STM32_PINMUX('D', 3, ANALOG)>, /* LTDC_G7 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* LTDC_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LTDC_B3 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* LTDC_G3 */ + <STM32_PINMUX('E', 12, ANALOG)>, /* LTDC_B4 */ + <STM32_PINMUX('E', 13, ANALOG)>, /* LTDC_DE */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LTDC_R7 */ + <STM32_PINMUX('H', 4, ANALOG)>, /* LTDC_G5 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LTDC_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LTDC_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LTDC_R4 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LTDC_G2 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LTDC_G4 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LTDC_G6 */ + <STM32_PINMUX('I', 5, ANALOG)>, /* LTDC_B5 */ + <STM32_PINMUX('I', 6, ANALOG)>, /* LTDC_B6 */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LTDC_VSYNC */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LTDC_HSYNC */ + <STM32_PINMUX('E', 14, ANALOG)>; /* LTDC_CLK */ + }; + }; + + ltdc_pins_d: ltdc-3 { + pins1 { + pinmux = <STM32_PINMUX('G', 7, AF14)>; /* LCD_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */ + <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('A', 5, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('B', 0, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('H', 4, AF9)>, /* LCD_G5 */ + <STM32_PINMUX('I', 11, AF9)>, /* LCD_G6 */ + <STM32_PINMUX('G', 8, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('I', 7, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + ltdc_sleep_pins_d: ltdc-sleep-3 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('A', 5, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('H', 4, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('G', 8, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('I', 7, ANALOG)>; /* LCD_B7 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ @@ -569,6 +780,46 @@ }; }; + m_can1_pins_b: m-can1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_b: m_can1-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('A', 11, ANALOG)>; /* CAN1_RX */ + }; + }; + + m_can2_pins_a: m-can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-disable; + }; + }; + + m_can2_sleep_pins_a: m_can2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* CAN2_TX */ + <STM32_PINMUX('B', 5, ANALOG)>; /* CAN2_RX */ + }; + }; + pwm1_pins_a: pwm1-0 { pins { pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */ @@ -618,6 +869,21 @@ }; }; + pwm3_pins_b: pwm3-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_b: pwm3-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* TIM3_CH2 */ + }; + }; + pwm4_pins_a: pwm4-0 { pins { pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */ @@ -665,6 +931,25 @@ }; }; + pwm5_pins_b: pwm5-1 { + pins { + pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */ + <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */ + <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_b: pwm5-sleep-1 { + pins { + pinmux = <STM32_PINMUX('H', 11, ANALOG)>, /* TIM5_CH2 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* TIM5_CH3 */ + <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */ + }; + }; + pwm8_pins_a: pwm8-0 { pins { pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ @@ -778,7 +1063,7 @@ }; }; - sai2a_sleep_pins_a: sai2a-1 { + sai2a_sleep_pins_a: sai2a-sleep-0 { pins { pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ @@ -787,7 +1072,7 @@ }; }; - sai2a_pins_b: sai2a-2 { + sai2a_pins_b: sai2a-1 { pins1 { pinmux = <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ @@ -798,7 +1083,7 @@ }; }; - sai2a_sleep_pins_b: sai2a-sleep-3 { + sai2a_sleep_pins_b: sai2a-sleep-1 { pins { pinmux = <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ @@ -806,6 +1091,25 @@ }; }; + sai2a_pins_c: sai2a-4 { + pins { + pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('D', 12, AF10)>; /* SAI2_FS_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_c: sai2a-5 { + pins { + pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('D', 12, ANALOG)>; /* SAI2_FS_A */ + }; + }; + sai2b_pins_a: sai2b-0 { pins1 { pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ @@ -821,7 +1125,7 @@ }; }; - sai2b_sleep_pins_a: sai2b-1 { + sai2b_sleep_pins_a: sai2b-sleep-0 { pins { pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ @@ -830,14 +1134,27 @@ }; }; - sai2b_pins_b: sai2b-2 { + sai2b_pins_b: sai2b-1 { pins { pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ bias-disable; }; }; - sai2b_sleep_pins_b: sai2b-3 { + sai2b_sleep_pins_b: sai2b-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai2b_pins_c: sai2a-4 { + pins1 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_c: sai2a-sleep-5 { pins { pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ }; @@ -852,7 +1169,7 @@ }; }; - sai4a_sleep_pins_a: sai4a-1 { + sai4a_sleep_pins_a: sai4a-sleep-0 { pins { pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ }; @@ -939,7 +1256,7 @@ sdmmc1_dir_pins_b: sdmmc1-dir-1 { pins1 { pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('E', 14, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ slew-rate = <1>; drive-push-pull; @@ -954,9 +1271,9 @@ sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 { pins { pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ - <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ }; }; @@ -1080,6 +1397,27 @@ sdmmc2_d47_pins_b: sdmmc2-d47-1 { pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc2_d47_pins_c: sdmmc2-d47-2 { + pins { pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ @@ -1090,7 +1428,7 @@ }; }; - sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 { + sdmmc2_d47_sleep_pins_c: sdmmc2-d47-sleep-2 { pins { pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */ @@ -1153,6 +1491,60 @@ }; }; + sdmmc3_b4_pins_b: sdmmc3-b4-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_b: sdmmc3-b4-od-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_b: sdmmc3-b4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ + }; + }; + spdifrx_pins_a: spdifrx-0 { pins { pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ @@ -1160,7 +1552,7 @@ }; }; - spdifrx_sleep_pins_a: spdifrx-1 { + spdifrx_sleep_pins_a: spdifrx-sleep-0 { pins { pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ }; @@ -1168,15 +1560,15 @@ spi2_pins_a: spi2-0 { pins1 { - pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ - <STM32_PINMUX('I', 0, AF5)>, /* SPI2_NSS */ - <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */ + pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; + pins2 { - pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */ + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */ bias-disable; }; }; @@ -1188,6 +1580,54 @@ }; }; + usart2_pins_a: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */ + <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; + + usart2_pins_b: usart2-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_sleep_pins_b: usart2-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; + usart3_pins_a: usart3-0 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ @@ -1227,6 +1667,19 @@ }; }; + uart4_pins_c: uart4-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + uart7_pins_a: uart7-0 { pins1 { pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ @@ -1242,6 +1695,19 @@ }; }; + uart7_pins_b: uart7-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */ + bias-disable; + }; + }; + uart8_pins_a: uart8-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ @@ -1279,7 +1745,7 @@ }; }; - i2c2_pins_sleep_b2: i2c2-1 { + i2c2_sleep_pins_b2: i2c2-sleep-0 { pins { pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ }; @@ -1295,7 +1761,7 @@ }; }; - i2c4_pins_sleep_a: i2c4-1 { + i2c4_sleep_pins_a: i2c4-sleep-0 { pins { pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ @@ -1316,4 +1782,18 @@ bias-disable; }; }; + + spi4_pins_a: spi4-0 { + pins { + pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */ + <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */ + bias-disable; + }; + }; }; diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index 66be7df9ae7..7ec90fe4a3f 100644 --- a/arch/arm/dts/stm32mp15-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi @@ -32,6 +32,10 @@ reboot { u-boot,dm-pre-reloc; + compatible = "syscon-reboot"; + regmap = <&rcc>; + offset = <0x404>; + mask = <0x1>; }; soc { @@ -185,6 +189,38 @@ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; }; +&usart1 { + resets = <&rcc USART1_R>; +}; + +&usart2 { + resets = <&rcc USART2_R>; +}; + +&usart3 { + resets = <&rcc USART3_R>; +}; + +&uart4 { + resets = <&rcc UART4_R>; +}; + +&uart5 { + resets = <&rcc UART5_R>; +}; + +&usart6 { + resets = <&rcc USART6_R>; +}; + +&uart7 { + resets = <&rcc UART7_R>; +}; + +&uart8{ + resets = <&rcc UART8_R>; +}; + &usbotg_hs { compatible = "st,stm32mp1-hsotg", "snps,dwc2"; }; diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi index d5216a18313..0d97f56fcaa 100644 --- a/arch/arm/dts/stm32mp151.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -44,8 +44,6 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; }; intc: interrupt-controller@a0021000 { @@ -128,13 +126,6 @@ status = "disabled"; }; - reboot { - compatible = "syscon-reboot"; - regmap = <&rcc>; - offset = <0x404>; - mask = <0x1>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -500,7 +491,7 @@ }; i2c1: i2c@40012000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40012000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, @@ -509,12 +500,13 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; status = "disabled"; }; i2c2: i2c@40013000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40013000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, @@ -523,12 +515,13 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; status = "disabled"; }; i2c3: i2c@40014000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40014000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, @@ -537,12 +530,13 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; status = "disabled"; }; i2c5: i2c@40015000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x40015000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, @@ -551,6 +545,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; status = "disabled"; }; @@ -575,14 +570,14 @@ dac1: dac@1 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <1>; status = "disabled"; }; dac2: dac@2 { compatible = "st,stm32-dac"; - #io-channels-cells = <1>; + #io-channel-cells = <1>; reg = <2>; status = "disabled"; }; @@ -1157,6 +1152,11 @@ }; }; + pwr_mcu: pwr_mcu@50001014 { + compatible = "syscon"; + reg = <0x50001014 0x4>; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp1-exti", "syscon"; interrupt-controller; @@ -1413,14 +1413,12 @@ "mac-clk-tx", "mac-clk-rx", "eth-ck", - "ethstp", - "syscfg-clk"; + "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, <&rcc ETHCK_K>, - <&rcc ETHSTP>, - <&rcc SYSCFG>; + <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; snps,pbl = <2>; @@ -1458,6 +1456,11 @@ clock-names = "lcd"; resets = <&rcc LTDC_R>; status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + }; }; iwdg2: watchdog@5a002000 { @@ -1513,7 +1516,7 @@ }; i2c4: i2c@5c002000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x5c002000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, @@ -1522,6 +1525,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; status = "disabled"; }; @@ -1552,7 +1556,7 @@ }; i2c6: i2c@5c009000 { - compatible = "st,stm32f7-i2c"; + compatible = "st,stm32mp15-i2c"; reg = <0x5c009000 0x400>; interrupt-names = "event", "error"; interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, @@ -1561,6 +1565,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; status = "disabled"; }; @@ -1742,6 +1747,7 @@ resets = <&rcc MCU_R>; st,syscfg-holdboot = <&rcc 0x10C 0x1>; st,syscfg-tz = <&rcc 0x000 0x1>; + st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; status = "disabled"; }; }; diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi index 3f0a4a91cce..54e73ccea44 100644 --- a/arch/arm/dts/stm32mp157.dtsi +++ b/arch/arm/dts/stm32mp157.dtsi @@ -15,7 +15,6 @@ clocks = <&rcc GPU>, <&rcc GPU_K>; clock-names = "bus" ,"core"; resets = <&rcc GPU_R>; - status = "disabled"; }; dsi: dsi@5a000000 { @@ -25,7 +24,14 @@ clock-names = "pclk", "ref", "px_clk"; resets = <&rcc DSI_R>; reset-names = "apb"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; }; }; }; diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 7b8c1c1cc7f..67876192900 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -16,6 +16,7 @@ config { u-boot,boot-led = "heartbeat"; u-boot,error-led = "error"; + u-boot,mmc-env-partition = "ssbl"; st,adc_usb_pd = <&adc1 18>, <&adc1 19>; st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; @@ -162,8 +163,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a { @@ -194,5 +193,4 @@ &usbotg_hs { u-boot,force-b-session-valid; - hnp-srp-disable; }; diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts index 7985b80967c..9a8a26710ac 100644 --- a/arch/arm/dts/stm32mp157c-dk2.dts +++ b/arch/arm/dts/stm32mp157c-dk2.dts @@ -27,15 +27,10 @@ }; &dsi { - #address-cells = <1>; - #size-cells = <0>; status = "okay"; phy-dsi-supply = <®18>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; dsi_in: endpoint { @@ -83,9 +78,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep1_out: endpoint@1 { reg = <1>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index ef3e7f45a36..f3002e995bc 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -17,6 +17,7 @@ config { u-boot,boot-led = "heartbeat"; u-boot,error-led = "error"; + u-boot,mmc-env-partition = "ssbl"; st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; }; @@ -158,8 +159,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a { diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index c4c1202789d..072d646379e 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -134,13 +134,12 @@ &gpu { contiguous-area = <&gpu_reserved>; - status = "okay"; }; &i2c4 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; - pinctrl-1 = <&i2c4_pins_sleep_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; clock-frequency = <400000>; @@ -328,6 +327,10 @@ bus-width = <4>; vmmc-supply = <&vdd_sd>; vqmmc-supply = <&sd_switch>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; status = "okay"; }; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index 8a4c7ff31a9..b19056557ef 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -98,15 +98,10 @@ }; &dsi { - #address-cells = <1>; - #size-cells = <0>; phy-dsi-supply = <®18>; status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; dsi_in: endpoint { @@ -141,7 +136,7 @@ ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii-id"; max-speed = <1000>; @@ -176,7 +171,7 @@ &i2c2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; - pinctrl-1 = <&i2c2_pins_sleep_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -230,7 +225,7 @@ &i2c5 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_pins_a>; - pinctrl-1 = <&i2c5_pins_sleep_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -240,9 +235,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep0_out: endpoint@0 { reg = <0>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi b/arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi new file mode 100644 index 00000000000..6be728846e2 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com> + */ + +#include <dt-bindings/clock/stm32mp1-clksrc.h> +#include "stm32mp15-u-boot.dtsi" +#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" + +/ { + config { + u-boot,boot-led = "heartbeat"; + }; +}; + +&clk_hse { + st,digbypass; +}; + +&i2c2 { + u-boot,dm-pre-reloc; +}; + +&i2c2_pins_a { + u-boot,dm-pre-reloc; + pins { + u-boot,dm-pre-reloc; + }; +}; + +&pmic { + u-boot,dm-pre-reloc; +}; + +&rcc { + st,clksrc = < + CLK_MPU_PLL1P + CLK_AXI_PLL2P + CLK_MCU_PLL3P + CLK_PLL12_HSE + CLK_PLL3_HSE + CLK_PLL4_HSE + CLK_RTC_LSE + CLK_MCO1_DISABLED + CLK_MCO2_DISABLED + >; + + st,clkdiv = < + 1 /*MPU*/ + 0 /*AXI*/ + 0 /*MCU*/ + 1 /*APB1*/ + 1 /*APB2*/ + 1 /*APB3*/ + 1 /*APB4*/ + 2 /*APB5*/ + 23 /*RTC*/ + 0 /*MCO1*/ + 0 /*MCO2*/ + >; + + st,pkcs = < + CLK_CKPER_HSE + CLK_FMC_ACLK + CLK_QSPI_ACLK + CLK_ETH_DISABLED + CLK_SDMMC12_PLL4P + CLK_DSI_DSIPLL + CLK_STGEN_HSE + CLK_USBPHY_HSE + CLK_SPI2S1_PLL3Q + CLK_SPI2S23_PLL3Q + CLK_SPI45_HSI + CLK_SPI6_HSI + CLK_I2C46_HSI + CLK_SDMMC3_PLL4P + CLK_USBO_USBPHY + CLK_ADC_CKPER + CLK_CEC_LSE + CLK_I2C12_HSI + CLK_I2C35_HSI + CLK_UART1_HSI + CLK_UART24_HSI + CLK_UART35_HSI + CLK_UART6_HSI + CLK_UART78_HSI + CLK_SPDIF_PLL4P + CLK_FDCAN_PLL4R + CLK_SAI1_PLL3Q + CLK_SAI2_PLL3Q + CLK_SAI3_PLL3Q + CLK_SAI4_PLL3Q + CLK_RNG1_LSI + CLK_RNG2_LSI + CLK_LPTIM1_PCLK1 + CLK_LPTIM23_PCLK3 + CLK_LPTIM45_LSE + >; + + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ + pll2: st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; + cfg = < 2 65 1 0 0 PQR(1,1,1) >; + frac = < 0x1400 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ + pll3: st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; + cfg = < 1 33 1 16 36 PQR(1,1,1) >; + frac = < 0x1a04 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ + pll4: st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; + cfg = < 3 98 5 7 7 PQR(1,1,1) >; + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi new file mode 100644 index 00000000000..83ff2e7ce17 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com> + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + + model = "Seeed Studio Odyssey-STM32MP157C SOM"; + compatible = "seeed,odyssey-stm32mp157c-som", "st,stm32mp157"; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + + optee@de000000 { + reg = <0xde000000 0x02000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + broken-cd; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers6 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + timer@5 { + status = "okay"; + }; +}; + +&timers12 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi b/arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi new file mode 100644 index 00000000000..abceba5cbd8 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com> + */ + + #include "stm32mp157c-odyssey-som-u-boot.dtsi" + +/ { + aliases { + mmc0 = &sdmmc1; + usb0 = &usbotg_hs; + }; + config { + u-boot,boot-led = "heartbeat"; + u-boot,error-led = "error"; + }; + led { + red { + label = "error"; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + status = "okay"; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&sdmmc1 { + u-boot,dm-spl; +}; + +&sdmmc1_b4_pins_a { + u-boot,dm-spl; + pins1 { + u-boot,dm-spl; + }; + pins2 { + u-boot,dm-spl; + }; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; + +&uart4_pins_a { + u-boot,dm-pre-reloc; + pins1 { + u-boot,dm-pre-reloc; + }; + pins2 { + u-boot,dm-pre-reloc; + }; +}; + diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts new file mode 100644 index 00000000000..0e725498dd1 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-odyssey.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com> + */ + +/dts-v1/; + +#include "stm32mp157c-odyssey-som.dtsi" + +/ { + + model = "Seeed Studio Odyssey-STM32MP157C Board"; + compatible = "seeed,odyssey-stm32mp157c", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc@0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc@100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_sleep_pins_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_sleep_pins_a>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; + diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-drc02-u-boot.dtsi new file mode 100644 index 00000000000..f83cfe90b84 --- /dev/null +++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include "stm32mp15xx-dhcom-u-boot.dtsi" diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts new file mode 100644 index 00000000000..5a237a3b7bf --- /dev/null +++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include "stm32mp15xx-dhcom.dtsi" + +/ { + model = "DH Electronics STM32MP15xx DHCOM DRC02"; + compatible = "dh,stm32mp15xx-dhcom-drc02", "st,stm32mp1xx"; + + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&adc { + status = "disabled"; +}; + +&dac { + status = "disabled"; +}; + +&gpiob { + /* + * NOTE: On DRC02, the RS485_RX_En is controlled by a separate + * GPIO line, however the STM32 UART driver assumes RX happens + * during TX anyway and that it only controls drive enable DE + * line. Hence, the RX is always enabled here. + */ + usb-hub { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rs485-rx-en"; + }; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "Out1", + "Out2", "", "", ""; +}; + +&gpioi { + gpio-line-names = "In1", "", "", "", + "", "", "", "", + "In2", "", "", "", + "", "", "", ""; + + /* + * NOTE: The USB Hub on the DRC02 needs a reset signal to be + * pulled high in order to be detected by the USB Controller. + * This signal should be handled by USB power sequencing in + * order to reset the Hub when USB bus is powered down, but + * so far there is no such functionality. + */ + usb-hub { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c5 { /* TP7/TP8 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&sdmmc3 { + /* + * On DRC02, the SoM does not have SDIO WiFi. The pins + * are used for on-board microSD slot instead. + */ + /delete-property/broken-cd; + cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + cs-gpios = <&gpioz 3 0>; + /* Use PIO for the display */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; /* Enable once there is display driver */ + /* + * Note: PF3/GPIO_A , PD6/GPIO_B , PG0/GPIO_C , PC6/GPIO_E are + * also connected to the display board connector. + */ +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +/* + * Note: PI3 is UART1_RTS and PI5 is UART1_CTS on DRC02 (uart4 of STM32MP1), + * however the STM32MP1 pinmux cannot map them to UART4 . + */ + +&uart8 { /* RS485 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dts b/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dts index dd98c7abeed..52a77c41231 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dts +++ b/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dts @@ -11,78 +11,9 @@ aliases { serial0 = &uart4; - ethernet0 = ðernet0; }; chosen { stdout-path = "serial0:115200n8"; }; - - ethernet_vio: vioregulator { - compatible = "regulator-fixed"; - regulator-name = "vio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; - regulator-always-on; - regulator-boot-on; - }; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rmii"; - max-speed = <100>; - phy-handle = <&phy0>; - st,eth_ref_clk_sel; - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - -&pinctrl { - ethernet0_rmii_pins_a: rmii-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ - <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ - <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ - <STM32_PINMUX('A', 1, AF0)>, /* ETH1_RMII_REF_CLK */ - <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ - <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ - <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ - <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ - bias-disable; - }; - }; - - ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ - <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ - <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ - <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ - <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ - <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ - <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ - <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ - <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ - }; - }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 69c5af42415..f96de9e7a33 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -264,9 +264,6 @@ &sdmmc1 { u-boot,dm-spl; - broken-cd; - /delete-property/ cd-gpios; - /delete-property/ disable-wp; }; &sdmmc1_b4_pins_a { diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi index b3f4cb45154..643aec94ce7 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi @@ -14,12 +14,23 @@ / { aliases { eeprom0 = &eeprom0; + ethernet0 = ðernet0; }; memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x40000000>; }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; }; &cec { @@ -39,6 +50,28 @@ status = "okay"; }; +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth_ref_clk_sel; + phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -228,6 +261,42 @@ vdd_3v3_usbfs-supply = <&vdd_usb>; }; +&pinctrl { + ethernet0_rmii_pins_a: rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF0)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; +}; + &qspi { pinctrl-names = "default", "sleep"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts index c1cc80bcf55..88f25d89b22 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts @@ -89,8 +89,8 @@ ðernet0 { status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_b>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_b>; + pinctrl-0 = <ðernet0_rgmii_pins_c>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii"; max-speed = <1000>; diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi index e7a46e7b5fb..d660dfb74e9 100644 --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -112,7 +112,11 @@ &cec { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; + pinctrl-1 = <&cec_sleep_pins_b>; + status = "okay"; +}; + +&dts { status = "okay"; }; @@ -127,7 +131,7 @@ ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rgmii-id"; max-speed = <1000>; @@ -145,13 +149,12 @@ &gpu { contiguous-area = <&gpu_reserved>; - status = "okay"; }; &i2c1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; i2c-scl-rising-time-ns = <100>; i2c-scl-falling-time-ns = <7>; status = "okay"; @@ -226,7 +229,7 @@ &i2c4 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; - pinctrl-1 = <&i2c4_pins_sleep_a>; + pinctrl-1 = <&i2c4_sleep_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; clock-frequency = <400000>; @@ -393,7 +396,7 @@ clock-names = "pclk", "i2sclk", "x8k", "x11k"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2s2_pins_a>; - pinctrl-1 = <&i2s2_pins_sleep_a>; + pinctrl-1 = <&i2s2_sleep_pins_a>; status = "okay"; i2s2_port: port { @@ -417,13 +420,10 @@ <dc { pinctrl-names = "default", "sleep"; pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; + pinctrl-1 = <<dc_sleep_pins_a>; status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - ltdc_ep0_out: endpoint@0 { reg = <0>; remote-endpoint = <&sii9022_in>; diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index 4003c2e38bf..478fd2f17d0 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -1,6 +1,7 @@ if ARCH_STM32MP config SPL + select SPL_BOARD_INIT select SPL_CLK select SPL_DM select SPL_DM_SEQ_ALIAS diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c index c5b8841b23c..e4199dbaa59 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c @@ -560,7 +560,7 @@ static int init_device(struct stm32prog_data *data, #ifdef CONFIG_MMC case STM32PROG_MMC: mmc = find_mmc_device(dev->dev_id); - if (mmc_init(mmc)) { + if (!mmc || mmc_init(mmc)) { stm32prog_err("mmc device %d not found", dev->dev_id); return -ENODEV; } diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c index 382067190ca..b7fcee2b367 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/cpu.c @@ -154,15 +154,20 @@ static void security_init(void) */ static void dbgmcu_init(void) { - setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN); - /* * Freeze IWDG2 if Cortex-A7 is in debug mode * done in TF-A for TRUSTED boot and * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */ - if (!IS_ENABLED(CONFIG_TFABOOT) && bsec_dbgswenable()) + if (!IS_ENABLED(CONFIG_TFABOOT) && bsec_dbgswenable()) { + setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN); setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2); + } +} + +void spl_board_init(void) +{ + dbgmcu_init(); } #endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */ @@ -220,9 +225,10 @@ static void early_enable_caches(void) dcache_enable(); if (IS_ENABLED(CONFIG_SPL_BUILD)) - mmu_set_region_dcache_behaviour(STM32_SYSRAM_BASE, - STM32_SYSRAM_SIZE, - DCACHE_DEFAULT_OPTION); + mmu_set_region_dcache_behaviour( + ALIGN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE), + round_up(STM32_SYSRAM_SIZE, MMU_SECTION_SIZE), + DCACHE_DEFAULT_OPTION); else mmu_set_region_dcache_behaviour(STM32_DDR_BASE, STM32_DDR_SIZE, DCACHE_DEFAULT_OPTION); @@ -241,7 +247,6 @@ int arch_cpu_init(void) timer_init(); #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) - dbgmcu_init(); #ifndef CONFIG_TFABOOT security_init(); update_bootmode(); diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c index 39413e9a0e1..e84bdad7bfc 100644 --- a/arch/arm/mach-stm32mp/spl.c +++ b/arch/arm/mach-stm32mp/spl.c @@ -147,7 +147,7 @@ void spl_board_prepare_for_boot(void) dcache_disable(); } -void spl_board_prepare_for_boot_linux(void) +void spl_board_prepare_for_linux(void) { dcache_disable(); } diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index ae8d581d1c3..17dbf20d76a 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -653,18 +653,6 @@ int board_interface_eth_init(struct udevice *dev, return 0; } -enum env_location env_get_location(enum env_operation op, int prio) -{ - if (prio) - return ENVL_UNKNOWN; - -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH - return ENVL_SPI_FLASH; -#else - return ENVL_NOWHERE; -#endif -} - #if defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) { diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 57a649e97e3..1d274c3157f 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -686,7 +686,7 @@ int board_late_init(void) if (!ret) ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_BOARD), &otp, sizeof(otp)); - if (!ret && otp) { + if (ret > 0 && otp) { snprintf(buf, sizeof(buf), "0x%04x", otp >> 16); env_set("board_id", buf); @@ -787,17 +787,22 @@ enum env_location env_get_location(enum env_operation op, int prio) return ENVL_UNKNOWN; switch (bootmode & TAMP_BOOT_DEVICE_MASK) { -#ifdef CONFIG_ENV_IS_IN_EXT4 +#if CONFIG_IS_ENABLED(ENV_IS_IN_MMC) + case BOOT_FLASH_SD: + case BOOT_FLASH_EMMC: + return ENVL_MMC; +#endif +#if CONFIG_IS_ENABLED(ENV_IS_IN_EXT4) case BOOT_FLASH_SD: case BOOT_FLASH_EMMC: return ENVL_EXT4; #endif -#ifdef CONFIG_ENV_IS_IN_UBI +#if CONFIG_IS_ENABLED(ENV_IS_IN_UBI) case BOOT_FLASH_NAND: case BOOT_FLASH_SPINAND: return ENVL_UBI; #endif -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH +#if CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH) case BOOT_FLASH_NOR: return ENVL_SPI_FLASH; #endif @@ -829,6 +834,15 @@ const char *env_ext4_get_dev_part(void) } #endif +#if defined(CONFIG_ENV_IS_IN_MMC) +int mmc_get_env_dev(void) +{ + u32 bootmode = get_bootmode(); + + return (bootmode & TAMP_BOOT_INSTANCE_MASK) - 1; +} +#endif + #if defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) { diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index e68b0b80821..5c500a131e0 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -22,12 +22,14 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 +CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SPI_FLASH_MTD=y CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_CMD_ADTIMG=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set @@ -59,17 +61,16 @@ CONFIG_CMD_UBI=y # CONFIG_SPL_DOS_PARTITION is not set CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" CONFIG_ENV_IS_NOWHERE=y -CONFIG_ENV_IS_IN_EXT4=y +CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_IS_IN_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_EXT4_INTERFACE="mmc" -CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto" -CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_UBI_PART="UBI" CONFIG_ENV_UBI_VOLUME="uboot_config" CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r" CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_SPL_ENV_IS_NOWHERE is not set +# CONFIG_SPL_ENV_IS_IN_SPI_FLASH is not set CONFIG_STM32_ADC=y CONFIG_SET_DFU_ALT_INFO=y CONFIG_USB_FUNCTION_FASTBOOT=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index 0b1bfa560c2..98680cb2dc7 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -13,6 +13,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_CMD_ADTIMG=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set @@ -42,13 +43,10 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y CONFIG_CMD_UBI=y CONFIG_ENV_IS_NOWHERE=y -CONFIG_ENV_IS_IN_EXT4=y +CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_IS_IN_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_EXT4_INTERFACE="mmc" -CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto" -CONFIG_ENV_EXT4_FILE="/uboot.env" CONFIG_ENV_UBI_PART="UBI" CONFIG_ENV_UBI_VOLUME="uboot_config" CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r" diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c index 464b0735e87..c6d30486025 100644 --- a/drivers/phy/phy-stm32-usbphyc.c +++ b/drivers/phy/phy-stm32-usbphyc.c @@ -263,7 +263,7 @@ static int stm32_usbphyc_phy_power_off(struct phy *phy) return 0; if (usbphyc_phy->vdd) { - ret = regulator_set_enable(usbphyc_phy->vdd, false); + ret = regulator_set_enable_if_allowed(usbphyc_phy->vdd, false); if (ret) return ret; } diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index de9f8cb9bf2..b937233797f 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -156,7 +156,7 @@ "splashimage=0xc4300000\0" \ "ramdisk_addr_r=0xc4400000\0" \ "altbootcmd=run bootcmd\0" \ - "env_check=if env info -p -d; then env save; fi\0" \ + "env_check=if env info -p -d -q; then env save; fi\0" \ STM32MP_BOOTCMD \ BOOTENV \ "boot_net_usb_start=true\0" |