diff options
-rw-r--r-- | drivers/gpio/axp_gpio.c | 25 | ||||
-rw-r--r-- | include/axp221.h | 8 |
2 files changed, 18 insertions, 15 deletions
diff --git a/drivers/gpio/axp_gpio.c b/drivers/gpio/axp_gpio.c index bd2ac892d08..ec00827f8f8 100644 --- a/drivers/gpio/axp_gpio.c +++ b/drivers/gpio/axp_gpio.c @@ -59,10 +59,11 @@ static int axp_gpio_direction_output(struct udevice *dev, unsigned pin, u8 reg; switch (pin) { -#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */ +#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC + /* Only available on later PMICs */ case SUNXI_GPIO_AXP0_VBUS_ENABLE: - ret = pmic_bus_clrbits(AXP221_MISC_CTRL, - AXP221_MISC_CTRL_N_VBUSEN_FUNC); + ret = pmic_bus_clrbits(AXP_MISC_CTRL, + AXP_MISC_CTRL_N_VBUSEN_FUNC); if (ret) return ret; @@ -90,10 +91,11 @@ static int axp_gpio_get_value(struct udevice *dev, unsigned pin) mask = AXP_POWER_STATUS_VBUS_PRESENT; break; #endif -#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */ +#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC + /* Only available on later PMICs */ case SUNXI_GPIO_AXP0_VBUS_ENABLE: - ret = pmic_bus_read(AXP221_VBUS_IPSOUT, &val); - mask = AXP221_VBUS_IPSOUT_DRIVEBUS; + ret = pmic_bus_read(AXP_VBUS_IPSOUT, &val); + mask = AXP_VBUS_IPSOUT_DRIVEBUS; break; #endif default: @@ -115,14 +117,15 @@ static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val) u8 reg; switch (pin) { -#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */ +#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC + /* Only available on later PMICs */ case SUNXI_GPIO_AXP0_VBUS_ENABLE: if (val) - return pmic_bus_setbits(AXP221_VBUS_IPSOUT, - AXP221_VBUS_IPSOUT_DRIVEBUS); + return pmic_bus_setbits(AXP_VBUS_IPSOUT, + AXP_VBUS_IPSOUT_DRIVEBUS); else - return pmic_bus_clrbits(AXP221_VBUS_IPSOUT, - AXP221_VBUS_IPSOUT_DRIVEBUS); + return pmic_bus_clrbits(AXP_VBUS_IPSOUT, + AXP_VBUS_IPSOUT_DRIVEBUS); #endif default: reg = axp_get_gpio_ctrl_reg(pin); diff --git a/include/axp221.h b/include/axp221.h index 04cd8c2be48..b4b64b0e870 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -43,12 +43,8 @@ #define AXP221_ALDO1_CTRL 0x28 #define AXP221_ALDO2_CTRL 0x29 #define AXP221_ALDO3_CTRL 0x2a -#define AXP221_VBUS_IPSOUT 0x30 -#define AXP221_VBUS_IPSOUT_DRIVEBUS (1 << 2) #define AXP221_SHUTDOWN 0x32 #define AXP221_SHUTDOWN_POWEROFF (1 << 7) -#define AXP221_MISC_CTRL 0x8f -#define AXP221_MISC_CTRL_N_VBUSEN_FUNC (1 << 4) #define AXP221_PAGE 0xff /* Page 1 addresses */ @@ -57,6 +53,10 @@ /* For axp_gpio.c */ #define AXP_POWER_STATUS 0x00 #define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_VBUS_IPSOUT 0x30 +#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2) +#define AXP_MISC_CTRL 0x8f +#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4) #define AXP_GPIO0_CTRL 0x90 #define AXP_GPIO1_CTRL 0x92 #define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ |