diff options
| -rw-r--r-- | board/xilinx/Kconfig | 17 | ||||
| -rw-r--r-- | configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig | 3 | ||||
| -rw-r--r-- | configs/syzygy_hub_defconfig | 3 | ||||
| -rw-r--r-- | configs/xilinx_zynqmp_virt_defconfig | 3 | ||||
| -rw-r--r-- | drivers/misc/Kconfig | 7 |
5 files changed, 23 insertions, 10 deletions
diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index c80d0a88128..01d7f8eac1c 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -56,3 +56,20 @@ config BOOT_SCRIPT_OFFSET default 0x7F80000 if ARCH_VERSAL help Specifies distro boot script offset in NAND/NOR flash. + +config ZYNQ_MAC_IN_EEPROM + bool "Reading MAC address from EEPROM" + help + Enable this option if your MAC address is saved in eeprom and + xlnx,eeprom DT property in chosen node points to it. + +if ZYNQ_MAC_IN_EEPROM + +config ZYNQ_GEM_I2C_MAC_OFFSET + hex "Set the I2C MAC offset" + default 0x0 + depends on DM_I2C + help + Set the MAC offset for i2C. + +endif diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index 25282ba428a..2426179d442 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -8,6 +8,8 @@ CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQ_MAC_IN_EEPROM=y +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa CONFIG_DEFAULT_DEVICE_TREE="avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y @@ -42,7 +44,6 @@ CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH_BAR=y diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index 8f6900661ac..276c476baeb 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -9,6 +9,8 @@ CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xe0000000 CONFIG_DEBUG_UART_CLOCK=50000000 +CONFIG_ZYNQ_MAC_IN_EEPROM=y +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA CONFIG_DEFAULT_DEVICE_TREE="zynq-syzygy-hub" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y @@ -40,7 +42,6 @@ CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQPL=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_PHY_MARVELL=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 3233f347304..01b2f18a057 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -7,6 +7,8 @@ CONFIG_DM_GPIO=y CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQ_MAC_IN_EEPROM=y +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_ZYNQMP_USB=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC" CONFIG_AHCI=y @@ -91,7 +93,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b67e906a76b..29432ae7eb4 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -376,13 +376,6 @@ config SPL_I2C_EEPROM This option is an SPL-variant of the I2C_EEPROM option. See the help of I2C_EEPROM for details. -config ZYNQ_GEM_I2C_MAC_OFFSET - hex "Set the I2C MAC offset" - default 0x0 - depends on DM_I2C - help - Set the MAC offset for i2C. - if I2C_EEPROM config SYS_I2C_EEPROM_ADDR |