diff options
80 files changed, 682 insertions, 188 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cf134624a9..bbb1e2738bf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1368,6 +1368,7 @@ config TARGET_LS1028ARDB select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT + select BOARD_LATE_INIT help Support for Freescale LS1028ARDB platform The LS1028A Development System (RDB) is a high-performance diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 275c66d9929..b25639183f8 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -74,11 +74,11 @@ config ARCH_LS1043A select SYS_FSL_HAS_DDR4 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F - select SYS_I2C_MXC - select SYS_I2C_MXC_I2C1 - select SYS_I2C_MXC_I2C2 - select SYS_I2C_MXC_I2C3 - select SYS_I2C_MXC_I2C4 + select SYS_I2C_MXC if !DM_I2C + select SYS_I2C_MXC_I2C1 if !DM_I2C + select SYS_I2C_MXC_I2C2 if !DM_I2C + select SYS_I2C_MXC_I2C3 if !DM_I2C + select SYS_I2C_MXC_I2C4 if !DM_I2C imply CMD_PCI config ARCH_LS1046A @@ -107,11 +107,11 @@ config ARCH_LS1046A select SYS_FSL_SRDS_2 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F - select SYS_I2C_MXC - select SYS_I2C_MXC_I2C1 - select SYS_I2C_MXC_I2C2 - select SYS_I2C_MXC_I2C3 - select SYS_I2C_MXC_I2C4 + select SYS_I2C_MXC if !DM_I2C + select SYS_I2C_MXC_I2C1 if !DM_I2C + select SYS_I2C_MXC_I2C2 if !DM_I2C + select SYS_I2C_MXC_I2C3 if !DM_I2C + select SYS_I2C_MXC_I2C4 if !DM_I2C imply SCSI imply SCSI_AHCI diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts index 3fd37beedf4..029a8e386b1 100644 --- a/arch/arm/dts/fsl-ls1028a-qds.dts +++ b/arch/arm/dts/fsl-ls1028a-qds.dts @@ -49,6 +49,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; }; diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts index a8f40855b65..85b4815b2ed 100644 --- a/arch/arm/dts/fsl-ls1028a-rdb.dts +++ b/arch/arm/dts/fsl-ls1028a-rdb.dts @@ -48,6 +48,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; }; diff --git a/arch/arm/dts/fsl-ls1046a-frwy.dts b/arch/arm/dts/fsl-ls1046a-frwy.dts index 3d41e3bd44f..d39159322a5 100644 --- a/arch/arm/dts/fsl-ls1046a-frwy.dts +++ b/arch/arm/dts/fsl-ls1046a-frwy.dts @@ -32,3 +32,6 @@ }; +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi index c95f44fc361..76dc397328a 100644 --- a/arch/arm/dts/fsl-ls1046a-qds.dtsi +++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi @@ -80,3 +80,7 @@ &sata { status = "okay"; }; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts index a05c9e9b9ea..83e34ab02ad 100644 --- a/arch/arm/dts/fsl-ls1046a-rdb.dts +++ b/arch/arm/dts/fsl-ls1046a-rdb.dts @@ -43,3 +43,11 @@ &sata { status = "okay"; }; + +&i2c0 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts index 34df0f51060..592fd5977e2 100644 --- a/arch/arm/dts/fsl-lx2160a-qds.dts +++ b/arch/arm/dts/fsl-lx2160a-qds.dts @@ -13,6 +13,9 @@ / { model = "NXP Layerscape LX2160AQDS Board"; compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + aliases { + spi0 = &fspi; + }; }; &esdhc0 { @@ -46,6 +49,20 @@ }; }; +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + &sata0 { status = "okay"; }; diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts index e542c6992ab..87617ca51f6 100644 --- a/arch/arm/dts/fsl-lx2160a-rdb.dts +++ b/arch/arm/dts/fsl-lx2160a-rdb.dts @@ -39,6 +39,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; mt35xu512aba1: flash@1 { @@ -47,6 +49,8 @@ compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <1>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; }; }; diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 84e5cb46e5a..333e407b666 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -4,7 +4,8 @@ !defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_LX2160A) && \ !defined(CONFIG_ARCH_LS1028A) && !defined(CONFIG_ARCH_LS2080A) && \ !defined(CONFIG_ARCH_LS1088A) && !defined(CONFIG_ARCH_ASPEED) && \ - !defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_U8500) && \ + !defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_LS1043A) && \ + !defined(CONFIG_ARCH_LS1046A) && !defined(CONFIG_ARCH_U8500) && \ !defined(CONFIG_CORTINA_PLATFORM) #include <asm/arch/gpio.h> #endif diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig index 639353a94bb..5a2fa91f6be 100644 --- a/board/freescale/ls1012ardb/Kconfig +++ b/board/freescale/ls1012ardb/Kconfig @@ -35,7 +35,7 @@ config SYS_LS_PFE_FW_ADDR config SYS_LS_PFE_ESBC_ADDR hex "PFE Firmware HDR Addr" - default 0x40700000 + default 0x40640000 config DDR_PFE_PHYS_BASEADDR hex "PFE DDR physical base address" diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index 8c96b962b78..2d4b18cdbcb 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2019 NXP */ #include <common.h> @@ -271,11 +272,24 @@ unsigned long get_board_ddr_clk(void) return 66666666; } -int select_i2c_ch_pca9547(u8 ch) +int select_i2c_ch_pca9547(u8 ch, int bus_num) { int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; + + ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI, + 1, &dev); + if (ret) { + printf("%s: Cannot find udev for a bus %d\n", __func__, + bus_num); + return ret; + } + ret = dm_i2c_write(dev, 0, &ch, 1); +#else ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); +#endif if (ret) { puts("PCA: failed to select proper channel\n"); return ret; @@ -290,8 +304,10 @@ int dram_init(void) * When resuming from deep sleep, the I2C channel may not be * in the default channel. So, switch to the default channel * before accessing DDR SPD. + * + * PCA9547 mount on I2C1 bus */ - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); fsl_initdram(); #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \ defined(CONFIG_SPL_BUILD) @@ -304,16 +320,83 @@ int dram_init(void) int i2c_multiplexer_select_vid_channel(u8 channel) { - return select_i2c_ch_pca9547(channel); + return select_i2c_ch_pca9547(channel, 0); } void board_retimer_init(void) { u8 reg; + int bus_num = 0; /* Retimer is connected to I2C1_CH7_CH5 */ - select_i2c_ch_pca9547(I2C_MUX_CH7); + select_i2c_ch_pca9547(I2C_MUX_CH7, bus_num); reg = I2C_MUX_CH5; +#ifdef CONFIG_DM_I2C + struct udevice *dev; + int ret; + + ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_SEC, + 1, &dev); + if (ret) { + printf("%s: Cannot find udev for a bus %d\n", __func__, + bus_num); + return; + } + dm_i2c_write(dev, 0, ®, 1); + + /* Access to Control/Shared register */ + ret = i2c_get_chip_for_busnum(bus_num, I2C_RETIMER_ADDR, + 1, &dev); + if (ret) { + printf("%s: Cannot find udev for a bus %d\n", __func__, + bus_num); + return; + } + + reg = 0x0; + dm_i2c_write(dev, 0xff, ®, 1); + + /* Read device revision and ID */ + dm_i2c_read(dev, 1, ®, 1); + debug("Retimer version id = 0x%x\n", reg); + + /* Enable Broadcast. All writes target all channel register sets */ + reg = 0x0c; + dm_i2c_write(dev, 0xff, ®, 1); + + /* Reset Channel Registers */ + dm_i2c_read(dev, 0, ®, 1); + reg |= 0x4; + dm_i2c_write(dev, 0, ®, 1); + + /* Enable override divider select and Enable Override Output Mux */ + dm_i2c_read(dev, 9, ®, 1); + reg |= 0x24; + dm_i2c_write(dev, 9, ®, 1); + + /* Select VCO Divider to full rate (000) */ + dm_i2c_read(dev, 0x18, ®, 1); + reg &= 0x8f; + dm_i2c_write(dev, 0x18, ®, 1); + + /* Selects active PFD MUX Input as Re-timed Data (001) */ + dm_i2c_read(dev, 0x1e, ®, 1); + reg &= 0x3f; + reg |= 0x20; + dm_i2c_write(dev, 0x1e, ®, 1); + + /* Set data rate as 10.3125 Gbps */ + reg = 0x0; + dm_i2c_write(dev, 0x60, ®, 1); + reg = 0xb2; + dm_i2c_write(dev, 0x61, ®, 1); + reg = 0x90; + dm_i2c_write(dev, 0x62, ®, 1); + reg = 0xb3; + dm_i2c_write(dev, 0x63, ®, 1); + reg = 0xcd; + dm_i2c_write(dev, 0x64, ®, 1); +#else i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, ®, 1); /* Access to Control/Shared register */ @@ -360,9 +443,10 @@ void board_retimer_init(void) i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1); reg = 0xcd; i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1); +#endif /* Return the default channel */ - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, bus_num); } int board_early_init_f(void) @@ -375,9 +459,11 @@ int board_early_init_f(void) u8 uart; #endif +#ifdef CONFIG_SYS_I2C #ifdef CONFIG_SYS_I2C_EARLY_INIT i2c_early_init_f(); #endif +#endif fsl_lsch2_early_init_f(); #ifdef CONFIG_HAS_FSL_XHCI_USB @@ -457,7 +543,7 @@ int board_init(void) erratum_a010315(); #endif - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); board_retimer_init(); #ifdef CONFIG_SYS_FSL_SERDES diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c index db8b3a5b921..8c0abb63a9d 100644 --- a/board/freescale/ls1046afrwy/ls1046afrwy.c +++ b/board/freescale/ls1046afrwy/ls1046afrwy.c @@ -36,11 +36,24 @@ DECLARE_GLOBAL_DATA_PTR; -int select_i2c_ch_pca9547(u8 ch) +int select_i2c_ch_pca9547(u8 ch, int bus_num) { int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; + + ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI, + 1, &dev); + if (ret) { + printf("%s: Cannot find udev for a bus %d\n", __func__, + bus_num); + return ret; + } + ret = dm_i2c_write(dev, 0, &ch, 1); +#else ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); +#endif if (ret) { puts("PCA: failed to select proper channel\n"); return ret; @@ -149,7 +162,7 @@ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); sec_init(); #endif - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); return 0; } diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index aac5d9aa848..cabd7ee648c 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2019 NXP */ #include <common.h> @@ -269,11 +270,23 @@ u32 get_lpuart_clk(void) } #endif -int select_i2c_ch_pca9547(u8 ch) +int select_i2c_ch_pca9547(u8 ch, int bus_num) { int ret; +#ifdef CONFIG_DM_I2C + struct udevice *dev; + ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI, + 1, &dev); + if (ret) { + printf("%s: Cannot find udev for a bus %d\n", __func__, + bus_num); + return ret; + } + ret = dm_i2c_write(dev, 0, &ch, 1); +#else ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); +#endif if (ret) { puts("PCA: failed to select proper channel\n"); return ret; @@ -288,8 +301,10 @@ int dram_init(void) * When resuming from deep sleep, the I2C channel may not be * in the default channel. So, switch to the default channel * before accessing DDR SPD. + * + * PCA9547 mount on I2C1 bus */ - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); fsl_initdram(); #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \ defined(CONFIG_SPL_BUILD) @@ -302,7 +317,7 @@ int dram_init(void) int i2c_multiplexer_select_vid_channel(u8 channel) { - return select_i2c_ch_pca9547(channel); + return select_i2c_ch_pca9547(channel, 0); } int board_early_init_f(void) @@ -315,9 +330,11 @@ int board_early_init_f(void) u8 uart; #endif +#ifdef CONFIG_SYS_I2C #ifdef CONFIG_SYS_I2C_EARLY_INIT i2c_early_init_f(); #endif +#endif fsl_lsch2_early_init_f(); #ifdef CONFIG_HAS_FSL_XHCI_USB @@ -394,7 +411,7 @@ int misc_init_r(void) int board_init(void) { - select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); #ifdef CONFIG_SYS_FSL_SERDES config_serdes_mux(); diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 103b0cc6591..4b20bb440f7 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -29,11 +29,14 @@ #include "../common/vid.h" #include <fsl_immap.h> #include <asm/arch-fsl-layerscape/fsl_icid.h> +#include <asm/gic-v3.h> +#include <cpu_func.h> #ifdef CONFIG_EMC2305 #include "../common/emc2305.h" #endif +#define GIC_LPI_SIZE 0x200000 #ifdef CONFIG_TARGET_LX2160AQDS #define CFG_MUX_I2C_SDHC(reg, value) ((reg & 0x3f) | value) #define SET_CFG_MUX1_SDHC1_SDHC(reg) (reg & 0x3f) @@ -149,6 +152,7 @@ int board_fix_fdt(void *fdt) reg_name = reg_names; remaining_names_len = names_len - (reg_name - reg_names); + i = 0; while ((i < ARRAY_SIZE(reg_names_map)) && remaining_names_len) { old_name_len = strlen(reg_names_map[i].old_str); new_name_len = strlen(reg_names_map[i].new_str); @@ -274,7 +278,14 @@ int i2c_multiplexer_select_vid_channel(u8 channel) int init_func_vid(void) { - if (adjust_vdd(0) < 0) + int set_vid; + + if (IS_SVR_REV(get_svr(), 1, 0)) + set_vid = adjust_vdd(800); + else + set_vid = adjust_vdd(0); + + if (set_vid < 0) printf("core voltage not adjusted\n"); return 0; @@ -469,10 +480,16 @@ int config_board_mux(void) reg11 = SET_CFG_MUX3_SDHC1_SPI(reg11, 0x01); QIXIS_WRITE(brdcfg[11], reg11); } else { - /* Routes {SDHC1_DAT4} to SDHC1 adapter slot */ + /* + * If {SDHC1_DAT4} has been configured to route to SDHC1_VS, + * do not change it. + * Otherwise route {SDHC1_DAT4} to SDHC1 adapter slot. + */ reg11 = QIXIS_READ(brdcfg[11]); - reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00); - QIXIS_WRITE(brdcfg[11], reg11); + if ((reg11 & 0x30) != 0x30) { + reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00); + QIXIS_WRITE(brdcfg[11], reg11); + } /* - Routes {SDHC1_DAT5, SDHC1_DAT6} to SDHC1 adapter slot. * {SDHC1_DAT7, SDHC1_DS } to SDHC1 adapter slot. @@ -627,8 +644,22 @@ void board_quiesce_devices(void) } #endif -#ifdef CONFIG_OF_BOARD_SETUP +#ifdef CONFIG_GIC_V3_ITS +void fdt_fixup_gic_lpi_memory(void *blob, u64 gic_lpi_base) +{ + u32 phandle; + int err; + struct fdt_memory gic_lpi; + + gic_lpi.start = gic_lpi_base; + gic_lpi.end = gic_lpi_base + GIC_LPI_SIZE - 1; + err = fdtdec_add_reserved_memory(blob, "gic-lpi", &gic_lpi, &phandle); + if (err < 0) + debug("failed to add reserved memory: %d\n", err); +} +#endif +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { int i; @@ -639,6 +670,7 @@ int ft_board_setup(void *blob, bd_t *bd) u64 mc_memory_base = 0; u64 mc_memory_size = 0; u16 total_memory_banks; + u64 gic_lpi_base; ft_cpu_setup(blob, bd); @@ -658,6 +690,12 @@ int ft_board_setup(void *blob, bd_t *bd) size[i] = gd->bd->bi_dram[i].size; } +#ifdef CONFIG_GIC_V3_ITS + gic_lpi_base = gd->arch.resv_ram - GIC_LPI_SIZE; + gic_lpi_tables_init(gic_lpi_base, cpu_numcores()); + fdt_fixup_gic_lpi_memory(blob, gic_lpi_base); +#endif + #ifdef CONFIG_RESV_RAM /* reduce size if reserved memory is within this bank */ if (gd->arch.resv_ram >= base[0] && diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index 11d0cee39a3..1e601484eee 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -5,6 +5,7 @@ CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_ENV_OFFSET=0x300000 CONFIG_DM_GPIO=y +CONFIG_BLK=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_NR_DRAM_BANKS=2 diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig index 2818bdf0d21..420a2f416cb 100644 --- a/configs/ls1012afrdm_tfa_defconfig +++ b/configs/ls1012afrdm_tfa_defconfig @@ -6,6 +6,7 @@ CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_ENV_OFFSET=0x500000 CONFIG_DM_GPIO=y +CONFIG_BLK=y CONFIG_QSPI_AHB_INIT=y CONFIG_NR_DRAM_BANKS=2 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig index 2f48da82e4d..4e937e53eef 100644 --- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig @@ -60,3 +60,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_RSA_SOFTWARE_EXP=y +CONFIG_FSL_PFE=y +CONFIG_DM_ETH=y diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig index 4dec4181b71..fdf2324a631 100644 --- a/configs/ls1012ardb_tfa_defconfig +++ b/configs/ls1012ardb_tfa_defconfig @@ -40,7 +40,6 @@ CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y -CONFIG_MMC_HS200_SUPPORT=y CONFIG_FSL_ESDHC=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig index 7ba0c47a5bb..512f7753031 100644 --- a/configs/ls1021aiot_qspi_defconfig +++ b/configs/ls1021aiot_qspi_defconfig @@ -45,5 +45,6 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 3ef5520969f..7ffd1c3bc6e 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -45,7 +45,6 @@ CONFIG_I2C_DEFAULT_BUS_NUMBER=0 CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_DM_MMC=y -CONFIG_MMC_HS200_SUPPORT=y CONFIG_FSL_ESDHC=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig index 2885552ef34..93b86af6074 100644 --- a/configs/ls1043aqds_defconfig +++ b/configs/ls1043aqds_defconfig @@ -62,3 +62,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index 9d9229ac03a..f89c2ee3a4f 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -64,3 +64,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index c45eaea02a5..a169bfef8f6 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -78,3 +78,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig index 8d28fe1baff..01d0af30b17 100644 --- a/configs/ls1043aqds_nor_ddr3_defconfig +++ b/configs/ls1043aqds_nor_ddr3_defconfig @@ -63,3 +63,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index 86b2eb56b84..65eff7c40b8 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -58,3 +58,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index bf3f0d09909..c5042a345d7 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -79,3 +79,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index 0449469b895..12706a48dc8 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -72,3 +72,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig index 0ece698350d..b7335bcd335 100644 --- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig @@ -63,3 +63,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig index 24db72a39d2..6e594ed07c6 100644 --- a/configs/ls1043aqds_tfa_defconfig +++ b/configs/ls1043aqds_tfa_defconfig @@ -71,3 +71,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig index 5e030e2586d..153a62866ff 100644 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -55,3 +55,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig index 0676cbccdd6..d1e534388b9 100644 --- a/configs/ls1043ardb_defconfig +++ b/configs/ls1043ardb_defconfig @@ -55,3 +55,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index 1f4c5705d58..252c7c8313a 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -75,3 +75,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index e7fe2de309f..de18aaa0635 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -74,3 +74,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y # CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index 6529c7334c1..149b25ffe52 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -74,3 +74,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index 228262477cd..b386fc668cc 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -73,3 +73,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y # CONFIG_SPL_USE_TINY_PRINTF is not set CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig index 94ca502f3b5..36eb0fcff72 100644 --- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig @@ -56,3 +56,5 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig index 4154075986c..eaddbca79f8 100644 --- a/configs/ls1043ardb_tfa_defconfig +++ b/configs/ls1043ardb_tfa_defconfig @@ -59,3 +59,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig index 2c258785d1e..616984f7d75 100644 --- a/configs/ls1046afrwy_tfa_defconfig +++ b/configs/ls1046afrwy_tfa_defconfig @@ -62,3 +62,5 @@ CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_ASIX88179=y CONFIG_USB_ETHER_RTL8152=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig index 6ea27c7ba42..ed25b7a680b 100644 --- a/configs/ls1046aqds_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -60,3 +60,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig index 04c1176d858..0a50bb14c02 100644 --- a/configs/ls1046aqds_defconfig +++ b/configs/ls1046aqds_defconfig @@ -62,3 +62,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index b0a24f297ee..17d1685081f 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -64,3 +64,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 3ffe6a6ef9c..0bafcbe168d 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -70,3 +70,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index d6253c790a5..ff0fd45c9ec 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -58,3 +58,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index fad33163b6b..78edb456b84 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -80,3 +80,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 3571a6f9e96..d085daf384c 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -74,3 +74,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig index e1737479231..6a9391478b4 100644 --- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig @@ -61,3 +61,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig index 824fc518ca7..04e6b2392c2 100644 --- a/configs/ls1046aqds_tfa_defconfig +++ b/configs/ls1046aqds_tfa_defconfig @@ -71,3 +71,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig index 768ce7a821b..bbb352db316 100644 --- a/configs/ls1046ardb_emmc_defconfig +++ b/configs/ls1046ardb_emmc_defconfig @@ -73,3 +73,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig index aff9bf81fcd..b9c8a8822cf 100644 --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -55,3 +55,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig index b482e73bef6..51edada3f86 100644 --- a/configs/ls1046ardb_qspi_defconfig +++ b/configs/ls1046ardb_qspi_defconfig @@ -57,3 +57,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig index 1e2770a9c08..84e059671c2 100644 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ b/configs/ls1046ardb_qspi_spl_defconfig @@ -77,3 +77,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_SPL_GZIP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig index 1f5fa8ff037..9954e894dac 100644 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -70,3 +70,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig index 197090474bc..35028097564 100644 --- a/configs/ls1046ardb_sdcard_defconfig +++ b/configs/ls1046ardb_sdcard_defconfig @@ -72,3 +72,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig index 1dde0ae73b3..9e3042b797e 100644 --- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig @@ -54,3 +54,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig index 280ca83d424..2f7686bafd1 100644 --- a/configs/ls1046ardb_tfa_defconfig +++ b/configs/ls1046ardb_tfa_defconfig @@ -58,3 +58,5 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig index 7c3b82700da..319f7103829 100644 --- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig @@ -65,6 +65,7 @@ CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y +CONFIG_NXP_FSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y @@ -73,3 +74,4 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_GIC_V3_ITS=y diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig index 449b3cbcf1c..0161dba9a72 100644 --- a/configs/lx2160aqds_tfa_defconfig +++ b/configs/lx2160aqds_tfa_defconfig @@ -4,6 +4,7 @@ CONFIG_TFABOOT=y CONFIG_SYS_TEXT_BASE=0x82000000 CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_ENV_OFFSET=0x500000 CONFIG_DM_GPIO=y CONFIG_FSPI_AHB_EN_4BYTE=y @@ -32,6 +33,8 @@ CONFIG_OF_CONTROL=y CONFIG_OF_BOARD_FIXUP=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds" CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y @@ -65,8 +68,10 @@ CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y +CONFIG_NXP_FSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_GIC_V3_ITS=y diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig index d1fffb399e9..10098ab5a9d 100644 --- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig @@ -60,6 +60,7 @@ CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y +CONFIG_NXP_FSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y @@ -68,3 +69,4 @@ CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_GIC_V3_ITS=y diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig index 93f3e200c03..c8582aa40d6 100644 --- a/configs/lx2160ardb_tfa_defconfig +++ b/configs/lx2160ardb_tfa_defconfig @@ -4,6 +4,7 @@ CONFIG_TFABOOT=y CONFIG_SYS_TEXT_BASE=0x82000000 CONFIG_SYS_MALLOC_F_LEN=0x6000 CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_SECT_SIZE=0x20000 CONFIG_ENV_OFFSET=0x500000 CONFIG_DM_GPIO=y CONFIG_EMC2305=y @@ -33,6 +34,8 @@ CONFIG_OF_CONTROL=y CONFIG_OF_BOARD_FIXUP=y CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb" CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_ADDR=0x20500000 CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y @@ -41,7 +44,6 @@ CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_DEFAULT_BUS_NUMBER=0 CONFIG_DM_MMC=y -CONFIG_MMC_HS200_SUPPORT=y CONFIG_FSL_ESDHC=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y @@ -64,8 +66,10 @@ CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y +CONFIG_NXP_FSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_GIC_V3_ITS=y diff --git a/drivers/net/fm/ls1043.c b/drivers/net/fm/ls1043.c index cd510f29559..ba4da69423a 100644 --- a/drivers/net/fm/ls1043.c +++ b/drivers/net/fm/ls1043.c @@ -65,12 +65,12 @@ phy_interface_t fman_port_enet_if(enum fm_port port) if (port == FM1_DTSEC3) if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) == FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII) { - return PHY_INTERFACE_MODE_RGMII_TXID; + return PHY_INTERFACE_MODE_RGMII_ID; } if (port == FM1_DTSEC4) if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) == FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII) { - return PHY_INTERFACE_MODE_RGMII_TXID; + return PHY_INTERFACE_MODE_RGMII_ID; } /* handle SGMII */ diff --git a/drivers/net/fm/ls1046.c b/drivers/net/fm/ls1046.c index 3617ad93e4a..49b540bd30b 100644 --- a/drivers/net/fm/ls1046.c +++ b/drivers/net/fm/ls1046.c @@ -71,12 +71,12 @@ phy_interface_t fman_port_enet_if(enum fm_port port) if (port == FM1_DTSEC3) if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) == FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII) - return PHY_INTERFACE_MODE_RGMII_TXID; + return PHY_INTERFACE_MODE_RGMII_ID; if (port == FM1_DTSEC4) if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) == FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII) - return PHY_INTERFACE_MODE_RGMII_TXID; + return PHY_INTERFACE_MODE_RGMII_ID; /* handle SGMII, only MAC 2/5/6/9/10 available */ switch (port) { diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c index 2c499513f99..bed8f14aeec 100644 --- a/drivers/net/fm/memac.c +++ b/drivers/net/fm/memac.c @@ -83,6 +83,8 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac, if_mode |= IF_MODE_GMII; break; case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: if_mode |= (IF_MODE_GMII | IF_MODE_RG); break; @@ -107,6 +109,8 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac, if_mode |= IF_MODE_EN_AUTO; if (type == PHY_INTERFACE_MODE_RGMII || + type == PHY_INTERFACE_MODE_RGMII_ID || + type == PHY_INTERFACE_MODE_RGMII_RXID || type == PHY_INTERFACE_MODE_RGMII_TXID) { if_mode &= ~IF_MODE_EN_AUTO; if_mode &= ~IF_MODE_SETSP_MASK; diff --git a/drivers/pci/pcie_ecam_generic.c b/drivers/pci/pcie_ecam_generic.c index c875f3a5b7d..890b6a8fb69 100644 --- a/drivers/pci/pcie_ecam_generic.c +++ b/drivers/pci/pcie_ecam_generic.c @@ -19,6 +19,8 @@ */ struct generic_ecam_pcie { void *cfg_base; + pci_size_t size; + int first_busno; }; /** @@ -43,7 +45,7 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus, void *addr; addr = pcie->cfg_base; - addr += PCI_BUS(bdf) << 20; + addr += (PCI_BUS(bdf) - pcie->first_busno) << 20; addr += PCI_DEV(bdf) << 15; addr += PCI_FUNC(bdf) << 12; addr += offset; @@ -52,6 +54,16 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus, return 0; } +static bool pci_generic_ecam_addr_valid(const struct udevice *bus, + pci_dev_t bdf) +{ + struct generic_ecam_pcie *pcie = dev_get_priv(bus); + int num_buses = DIV_ROUND_UP(pcie->size, 1 << 16); + + return (PCI_BUS(bdf) >= pcie->first_busno && + PCI_BUS(bdf) < pcie->first_busno + num_buses); +} + /** * pci_generic_ecam_read_config() - Read from configuration space * @bus: Pointer to the PCI bus @@ -68,6 +80,11 @@ static int pci_generic_ecam_read_config(const struct udevice *bus, pci_dev_t bdf, uint offset, ulong *valuep, enum pci_size_t size) { + if (!pci_generic_ecam_addr_valid(bus, bdf)) { + *valuep = pci_get_ff(size); + return 0; + } + return pci_generic_mmap_read_config(bus, pci_generic_ecam_conf_address, bdf, offset, valuep, size); } @@ -88,6 +105,9 @@ static int pci_generic_ecam_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, ulong value, enum pci_size_t size) { + if (!pci_generic_ecam_addr_valid(bus, bdf)) + return 0; + return pci_generic_mmap_write_config(bus, pci_generic_ecam_conf_address, bdf, offset, value, size); } @@ -116,9 +136,17 @@ static int pci_generic_ecam_ofdata_to_platdata(struct udevice *dev) return err; } - pcie->cfg_base = map_physmem(reg_res.start, - fdt_resource_size(®_res), - MAP_NOCACHE); + pcie->size = fdt_resource_size(®_res); + pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE); + + return 0; +} + +static int pci_generic_ecam_probe(struct udevice *dev) +{ + struct generic_ecam_pcie *pcie = dev_get_priv(dev); + + pcie->first_busno = dev->seq; return 0; } @@ -138,6 +166,7 @@ U_BOOT_DRIVER(pci_generic_ecam) = { .id = UCLASS_PCI, .of_match = pci_generic_ecam_ids, .ops = &pci_generic_ecam_ops, + .probe = pci_generic_ecam_probe, .ofdata_to_platdata = pci_generic_ecam_ofdata_to_platdata, .priv_auto_alloc_size = sizeof(struct generic_ecam_pcie), }; diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c index bcddff2d7a0..b30f223a5c2 100644 --- a/drivers/power/power_i2c.c +++ b/drivers/power/power_i2c.c @@ -7,6 +7,7 @@ * Stefano Babic, DENX Software Engineering, sbabic@denx.de * * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. + * (C) Copyright 2019 NXP */ #include <common.h> @@ -21,8 +22,20 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val) if (check_reg(p, reg)) return -EINVAL; +#if defined(CONFIG_DM_I2C) + struct udevice *dev; + int ret; + ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr, + 1, &dev); + if (ret) { + printf("%s: Cannot find udev for a bus %d\n", __func__, + p->bus); + return -ENXIO; + } +#else /* Non DM I2C support - will be removed */ I2C_SET_BUS(p->bus); +#endif switch (pmic_i2c_tx_num) { case 3: @@ -53,7 +66,11 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val) return -EINVAL; } +#if defined(CONFIG_DM_I2C) + return dm_i2c_write(dev, reg, buf, pmic_i2c_tx_num); +#else return i2c_write(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num); +#endif } int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) @@ -65,9 +82,21 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) if (check_reg(p, reg)) return -EINVAL; - I2C_SET_BUS(p->bus); +#if defined(CONFIG_DM_I2C) + struct udevice *dev; + ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr, + 1, &dev); + if (ret) { + printf("%s: Cannot find udev for a bus %d\n", __func__, + p->bus); + return -ENXIO; + } + ret = dm_i2c_read(dev, reg, buf, pmic_i2c_tx_num); +#else /* Non DM I2C support - will be removed */ + I2C_SET_BUS(p->bus); ret = i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num); +#endif if (ret) return ret; @@ -100,12 +129,25 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) int pmic_probe(struct pmic *p) { - i2c_set_bus_num(p->bus); debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name); +#if defined(CONFIG_DM_I2C) + struct udevice *dev; + int ret; + + ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr, + 1, &dev); + if (ret) { + printf("%s: Cannot find udev for a bus %d\n", __func__, + p->bus); + return -ENXIO; + } +#else /* Non DM I2C support - will be removed */ + i2c_set_bus_num(p->bus); if (i2c_probe(pmic_i2c_addr)) { printf("Can't find PMIC:%s\n", p->name); return -ENODEV; } +#endif return 0; } diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index dde4369c97c..899dfdbdf1f 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -8,6 +8,9 @@ #include "ls1012a_common.h" +#undef CONFIG_SYS_BOARD +#define CONFIG_SYS_BOARD "ls1012afrwy" + /* Board Rev*/ #define BOARD_REV_A_B 0x0 #define BOARD_REV_C 0x00080000 @@ -63,9 +66,9 @@ "fdtheader_addr_r=0x80100000\0" \ "kernelheader_addr_r=0x80200000\0" \ "kernelheader_size=0x40000\0" \ - "kernel_addr_r=0x96000000\0" \ + "kernel_addr_r=0x92000000\0" \ "fdt_addr_r=0x90000000\0" \ - "load_addr=0x96000000\0" \ + "load_addr=0x92000000\0" \ "kernel_size=0x2800000\0" \ "kernelheader_size=0x40000\0" \ "console=ttyS0,115200\0" \ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 1d218aa703d..7821e98a270 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -207,12 +207,13 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ -"initrd_high=0xffffffff\0" \ -"fdt_high=0xffffffff\0" +"initrd_high=0xffffffff\0" /* * Miscellaneous configurable options */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) + #define CONFIG_CMD_GREPENV #define CONFIG_CMD_MEMINFO diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 8bac2d25612..5a2bd754c4f 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -460,13 +460,11 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ - "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0" #else #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ - "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0" #endif @@ -474,6 +472,7 @@ unsigned long get_board_ddr_clk(void); /* * Miscellaneous configurable options */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 984df6249f9..46c60aaf5cb 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -154,7 +154,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "initrd_high=0xffffffff\0" \ - "fdt_high=0xffffffff\0" \ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x61000000\0" \ "kernelheader_addr=0x60800000\0" \ @@ -216,6 +215,8 @@ "bootm $load_addr#$board\0" /* Miscellaneous configurable options */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) + #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 8e2784b14bf..a6289850ca1 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -297,9 +297,8 @@ #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ + "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 $othbootargs\0" \ "initrd_high=0xffffffff\0" \ - "fdt_high=0xffffffff\0" \ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x65000000\0" \ "scriptaddr=0x80000000\0" \ @@ -313,7 +312,6 @@ "kernel_size=0x2800000\0" \ "kernel_addr_sd=0x8000\0" \ "kernel_size_sd=0x14000\0" \ - "$othbootargs\0" \ "othbootargs=cma=64M@0x0-0xb0000000\0" \ BOOTENV \ "boot_scripts=ls1021atwr_boot.scr\0" \ @@ -355,9 +353,8 @@ "$kernel_size && bootm $load_addr#$board\0" #else #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ + "bootargs=root=/dev/ram0 rw console=ttyS0,115200 $othbootargs\0" \ "initrd_high=0xffffffff\0" \ - "fdt_high=0xffffffff\0" \ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x61000000\0" \ "kernelheader_addr=0x60800000\0" \ @@ -375,7 +372,6 @@ "kernel_size_sd=0x14000\0" \ "kernelhdr_addr_sd=0x4000\0" \ "kernelhdr_size_sd=0x10\0" \ - "$othbootargs\0" \ "othbootargs=cma=64M@0x0-0xb0000000\0" \ BOOTENV \ "boot_scripts=ls1021atwr_boot.scr\0" \ @@ -441,6 +437,7 @@ /* * Miscellaneous configurable options */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 05b8cf00ee1..6905694d102 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2019 NXP + * Copyright 2019-2020 NXP */ #ifndef __L1028A_COMMON_H @@ -70,96 +70,10 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ - func(USB, usb, 0) + func(USB, usb, 0) \ + func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "board=ls1028ardb\0" \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "ramdisk_addr=0x800000\0" \ - "ramdisk_size=0x2000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "fdt_addr=0x00f00000\0" \ - "kernel_addr=0x01000000\0" \ - "scriptaddr=0x80000000\0" \ - "scripthdraddr=0x80080000\0" \ - "fdtheader_addr_r=0x80100000\0" \ - "kernelheader_addr_r=0x80200000\0" \ - "load_addr=0xa0000000\0" \ - "kernel_addr_r=0x81000000\0" \ - "fdt_addr_r=0x90000000\0" \ - "ramdisk_addr_r=0xa0000000\0" \ - "kernel_start=0x1000000\0" \ - "kernelheader_start=0x800000\0" \ - "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" \ - "kernelheader_size=0x40000\0" \ - "kernel_addr_sd=0x8000\0" \ - "kernel_size_sd=0x14000\0" \ - "kernelhdr_addr_sd=0x4000\0" \ - "kernelhdr_size_sd=0x10\0" \ - "console=ttyS0,115200\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - BOOTENV \ - "boot_scripts=ls1028ardb_boot.scr\0" \ - "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \ - "scan_dev_for_boot_part=" \ - "part list ${devtype} ${devnum} devplist; " \ - "env exists devplist || setenv devplist 1; " \ - "for distro_bootpart in ${devplist}; do " \ - "if fstype ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "bootfstype; then " \ - "run scan_dev_for_boot; " \ - "fi; " \ - "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ - "boot_a_script=" \ - "load ${devtype} ${devnum}:${distro_bootpart} " \ - "${scriptaddr} ${prefix}${script}; " \ - "env exists secureboot && load ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ - "&& esbc_validate ${scripthdraddr};" \ - "source ${scriptaddr}\0" \ - "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ - "sf probe 0:0 && sf read $load_addr " \ - "$kernel_start $kernel_size ; env exists secureboot &&" \ - "sf read $kernelheader_addr_r $kernelheader_start " \ - "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ - " bootm $load_addr#$board\0" \ - "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ - "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ - "&& hdp load $load_addr 0x2000\0" \ - "sd_bootcmd=echo Trying load from SD ...;" \ - "mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ - "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ - "&& hdp load $load_addr 0x2000\0" \ - "emmc_bootcmd=echo Trying load from EMMC ..;" \ - "mmcinfo; mmc dev 1; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ - "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ - "&& hdp load $load_addr 0x2000\0" - #undef CONFIG_BOOTCOMMAND #define XSPI_NOR_BOOTCOMMAND \ diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 982df07bb01..818b994b907 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2019 NXP + * Copyright 2019-2020 NXP */ #ifndef __LS1028A_QDS_H @@ -90,8 +90,6 @@ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ "fdt_addr=0x00f00000\0" \ "kernel_addr=0x01000000\0" \ "scriptaddr=0x80000000\0" \ @@ -101,15 +99,16 @@ "load_addr=0xa0000000\0" \ "kernel_addr_r=0x81000000\0" \ "fdt_addr_r=0x90000000\0" \ + "fdt2_addr_r=0x90010000\0" \ "ramdisk_addr_r=0xa0000000\0" \ "kernel_start=0x1000000\0" \ - "kernelheader_start=0x800000\0" \ + "kernelheader_start=0x600000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "kernelheader_size=0x40000\0" \ "kernel_addr_sd=0x8000\0" \ "kernel_size_sd=0x14000\0" \ - "kernelhdr_addr_sd=0x4000\0" \ + "kernelhdr_addr_sd=0x3000\0" \ "kernelhdr_size_sd=0x10\0" \ "console=ttyS0,115200\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ @@ -141,19 +140,35 @@ "${scripthdraddr} ${prefix}${boot_script_hdr} " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ - "sd_bootcmd=echo Trying load from SD ..;" \ - "mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ + "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ + "sf probe 0:0 && sf read $load_addr " \ + "$kernel_start $kernel_size ; env exists secureboot &&" \ + "sf read $kernelheader_addr_r $kernelheader_start " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + " bootm $load_addr#$board\0" \ + "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ + "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ + "&& hdp load $load_addr 0x2000\0" \ + "sd_bootcmd=echo Trying load from SD ...;" \ + "mmc dev 0; mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "emmc_bootcmd=echo Trying load from EMMC ..;" \ - "mmcinfo; mmc dev 1; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ + "mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmc dev 1; mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" + "bootm $load_addr#$board\0" \ + "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ + "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" + #endif #endif /* __LS1028A_QDS_H */ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index a4c3d73d2a1..0f289cb0780 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -72,4 +72,92 @@ #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 +/* Initial environment variables */ +#ifndef SPL_NO_ENV +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "board=ls1028ardb\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "bootm_size=0x10000000\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "kernel_start=0x1000000\0" \ + "kernelheader_start=0x600000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernel_size_sd=0x14000\0" \ + "kernelhdr_addr_sd=0x3000\0" \ + "kernelhdr_size_sd=0x20\0" \ + "console=ttyS0,115200\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + BOOTENV \ + "boot_scripts=ls1028ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ + "sf probe 0:0 && sf read $load_addr " \ + "$kernel_start $kernel_size ; env exists secureboot &&" \ + "sf read $kernelheader_addr_r $kernelheader_start " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + " bootm $load_addr#$board\0" \ + "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ + "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ + "&& hdp load $load_addr 0x2000\0" \ + "sd_bootcmd=echo Trying load from SD ...;" \ + "mmc dev 0;mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ + "mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmc dev 1;mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ + "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" +#endif #endif /* __LS1028A_RDB_H */ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index bf24d4036d2..985f40412c6 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2015 Freescale Semiconductor + * Copyright (C) 2019 NXP */ #ifndef __LS1043A_COMMON_H @@ -141,7 +142,17 @@ #endif /* I2C */ +#ifndef CONFIG_DM_I2C #define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ +#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ +#else +#define CONFIG_I2C_SET_DEFAULT_BUS_NUM +#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0 +#endif /* PCIe */ #ifndef SPL_NO_PCIE diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 3944f877942..e80c2996ef9 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -16,6 +16,7 @@ #define SPL_NO_QSPI #define SPL_NO_USB #define SPL_NO_SATA +#undef CONFIG_DM_I2C #endif #if defined(CONFIG_SPL_BUILD) && \ (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT)) @@ -126,7 +127,17 @@ #endif /* I2C */ +#ifndef CONFIG_DM_I2C #define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ +#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ +#else +#define CONFIG_I2C_SET_DEFAULT_BUS_NUM +#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0 +#endif /* PCIe */ #define CONFIG_PCIE1 /* PCIE controller 1 */ @@ -217,8 +228,7 @@ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ + "bootm_size=0x10000000\0" \ "fdt_addr=0x64f00000\0" \ "kernel_addr=0x65000000\0" \ "scriptaddr=0x80000000\0" \ diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 361c72fc8c9..4ac4a8d8568 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -443,19 +443,47 @@ unsigned long get_board_ddr_clk(void); "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ "sf read 0x80100000 0xE00000 0x100000;" \ "fsl_mc start mc 0x80000000 0x80100000\0" \ - "mcmemsize=0x70000000 \0" -#define QSPI_NOR_BOOTCOMMAND "sf probe 0:0;" \ - "sf read 0x80001000 0xd00000 0x100000;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " sf read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#define SD_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " mmc read $kernel_load $kernel_start_sd" \ - " $kernel_size_sd && bootm $kernel_load" -#define IFC_NOR_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \ - " cp.b $kernel_start $kernel_load" \ - " $kernel_size && bootm $kernel_load" + "mcmemsize=0x70000000 \0" \ + "BOARD=ls1088aqds\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + BOOTENV \ + "boot_scripts=ls1088aqds_boot.scr\0" \ + "boot_script_hdr=hdr_ls1088aqds_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr}; "\ + "env exists secureboot " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "qspi_bootcmd=echo Trying load from qspi..; " \ + "sf probe 0:0; " \ + "sf read 0x80001000 0xd00000 0x100000; " \ + "fsl_mc lazyapply dpl 0x80001000 && " \ + "sf read $kernel_load $kernel_start " \ + "$kernel_size && bootm $kernel_load#$BOARD\0" \ + "sd_bootcmd=echo Trying load from sd card..; " \ + "mmcinfo;mmc read 0x80001000 0x6800 0x800; "\ + "fsl_mc lazyapply dpl 0x80001000 && " \ + "mmc read $kernel_load $kernel_start_sd " \ + "$kernel_size_sd && bootm $kernel_load#$BOARD\0" \ + "nor_bootcmd=echo Trying load from nor..; " \ + "fsl_mc lazyapply dpl 0x580d00000 && " \ + "cp.b $kernel_start $kernel_load " \ + "$kernel_size && bootm $kernel_load#$BOARD\0" #else #if defined(CONFIG_QSPI_BOOT) #undef CONFIG_EXTRA_ENV_SETTINGS @@ -510,6 +538,15 @@ unsigned long get_board_ddr_clk(void); #endif /* CONFIG_TFABOOT */ #endif /* CONFIG_NXP_ESBC */ +#ifdef CONFIG_TFABOOT +#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ + "env exists secureboot && esbc_halt;;" +#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ + "env exists secureboot && esbc_halt;;" +#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;;" +#endif + #ifdef CONFIG_FSL_MC_ENET #define CONFIG_FSL_MEMAC #define CONFIG_PHYLIB diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 88da69f36f0..e93faab9a46 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -383,7 +383,30 @@ unsigned long get_board_ddr_clk(void); "kernelheader_size=0x40000\0" \ "BOARD=ls2088aqds\0" \ "mcmemsize=0x70000000 \0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ IFC_MC_INIT_CMD \ + BOOTENV \ + "boot_scripts=ls2088aqds_boot.scr\0" \ + "boot_script_hdr=hdr_ls2088aqds_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ "nor_bootcmd=echo Trying load from nor..;" \ "cp.b $kernel_addr $load_addr " \ "$kernel_size ; env exists secureboot && " \ @@ -429,6 +452,13 @@ unsigned long get_board_ddr_clk(void); #endif /* CONFIG_NXP_ESBC */ #ifdef CONFIG_TFABOOT +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + #define SD_BOOTCOMMAND \ "env exists mcinitcmd && env exists secureboot "\ "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \ @@ -436,14 +466,14 @@ unsigned long get_board_ddr_clk(void); "env exists mcinitcmd && run mcinitcmd " \ "&& mmc read 0x80d00000 0x6800 0x800 " \ "&& fsl_mc lazyapply dpl 0x80d00000; " \ - "run sd_bootcmd; " \ + "run distro_bootcmd;run sd_bootcmd; " \ "env exists secureboot && esbc_halt;" #define IFC_NOR_BOOTCOMMAND \ "env exists mcinitcmd && env exists secureboot "\ "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\ "&& fsl_mc lazyapply dpl 0x580d00000;" \ - "run nor_bootcmd; " \ + "run distro_bootcmd;run nor_bootcmd; " \ "env exists secureboot && esbc_halt;" #endif diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 373daebfbc4..d47abf6e657 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -187,11 +187,15 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* Initial environment variables */ -#define XSPI_MC_INIT_CMD \ - "env exists secureboot && " \ - "esbc_validate 0x20640000 && " \ - "esbc_validate 0x20680000 ;" \ - "fsl_mc start mc 0x20a00000 0x20e00000\0" +#define XSPI_MC_INIT_CMD \ + "sf probe 0:0 && " \ + "sf read 0x80640000 0x640000 0x80000 && " \ + "env exists secureboot && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000; " \ + "sf read 0x80a00000 0xa00000 0x300000 && " \ + "sf read 0x80e00000 0xe00000 0x100000; " \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" #define SD_MC_INIT_CMD \ "mmc read 0x80a00000 0x5000 0x1200;" \ @@ -249,10 +253,13 @@ unsigned long get_board_ddr_clk(void); "source ${scriptaddr}\0" #define XSPI_NOR_BOOTCOMMAND \ - "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x206C0000; " \ + "sf probe 0:0; " \ + "sf read 0x806c0000 0x6c0000 0x40000; " \ + "env exists mcinitcmd && env exists secureboot" \ + " && esbc_validate 0x806c0000; " \ + "sf read 0x80d00000 0xd00000 0x100000; " \ "env exists mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x20d00000; " \ + "fsl_mc lazyapply dpl 0x80d00000; " \ "run distro_bootcmd;run xspi_bootcmd; " \ "env exists secureboot && esbc_halt;" @@ -266,10 +273,22 @@ unsigned long get_board_ddr_clk(void); "run distro_bootcmd;run sd_bootcmd;" \ "env exists secureboot && esbc_halt;" +#define SD2_BOOTCOMMAND \ + "env exists mcinitcmd && mmcinfo; " \ + "mmc read 0x80d00000 0x6800 0x800; " \ + "env exists mcinitcmd && env exists secureboot " \ + " && mmc read 0x80780000 0x3C00 0x20 " \ + "&& esbc_validate 0x80780000;env exists mcinitcmd " \ + "&& fsl_mc lazyapply dpl 0x80d00000;" \ + "run distro_bootcmd;run sd2_bootcmd;" \ + "env exists secureboot && esbc_halt;" + #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(MMC, mmc, 0) \ - func(SCSI, scsi, 0) + func(MMC, mmc, 1) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> #endif /* __LX2_COMMON_H */ diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index 1eb63d826f9..3dd071fa25a 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -121,7 +121,6 @@ u8 qixis_esdhc_detect_quirk(void); /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ EXTRA_ENV_SETTINGS \ - "lx2160aqds_vdd_mv=800\0" \ "boot_scripts=lx2160aqds_boot.scr\0" \ "boot_script_hdr=hdr_lx2160aqds_bs.out\0" \ "BOARD=lx2160aqds\0" \ @@ -137,6 +136,13 @@ u8 qixis_esdhc_detect_quirk(void); "env exists secureboot && mmc read $kernelheader_addr_r "\ "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$BOARD\0" \ + "sd2_bootcmd=echo Trying load from emmc card..;" \ + "mmc dev 1; mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd ;" \ + "env exists secureboot && mmc read $kernelheader_addr_r "\ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$BOARD\0" #include <asm/fsl_secure_boot.h> diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index 82d49e53abd..f54edf356a2 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -93,7 +93,6 @@ EXTRA_ENV_SETTINGS \ "boot_scripts=lx2160ardb_boot.scr\0" \ "boot_script_hdr=hdr_lx2160ardb_bs.out\0" \ - "lx2160ardb_vdd_mv=800\0" \ "BOARD=lx2160ardb\0" \ "xspi_bootcmd=echo Trying load from flexspi..;" \ "sf probe 0:0 && sf read $load_addr " \ @@ -107,6 +106,13 @@ "env exists secureboot && mmc read $kernelheader_addr_r "\ "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$BOARD\0" \ + "sd2_bootcmd=echo Trying load from emmc card..;" \ + "mmc dev 1; mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd ;" \ + "env exists secureboot && mmc read $kernelheader_addr_r "\ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$BOARD\0" #include <asm/fsl_secure_boot.h> |