diff options
192 files changed, 9620 insertions, 1423 deletions
diff --git a/CHANGELOG b/CHANGELOG index b77eec71ba6..2397191fc97 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,359 @@ +commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jul 6 02:50:19 2007 +0200 + + Code cleanup and default config update for STC GP3 SSA board. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b44896215a09c60fa40cae906f7ed207bbc2c492 +Author: Sergei Poselenov <sposelenov@emcraft.com> +Date: Thu Jul 5 08:17:37 2007 +0200 + + Merged POST framework with the current TOT. + + Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> + +commit f780b83316d9af1f61d71cc88b1917b387b9b995 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Wed Jun 27 18:11:38 2007 +0200 + + resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + +commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jul 4 10:06:30 2007 +0200 + + ppc4xx: Update lwmon5 board + + - Add optional ECC generation routine to preserve existing + RAM values. This is needed for the Linux log-buffer support + - Add optional DDR2 setup with CL=4 + - GPIO50 not used anymore + - Lime register setup added + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1f2a05898658900dc5717761e27abf2052e67e13 +Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in> +Date: Sat Jun 30 18:50:48 2007 +0200 + + Fix S-ATA support. + + Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in> + +commit a5d71e290f3673269be8eefb4ec44f53412f9461 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Mon Jun 25 19:11:37 2007 +0200 + + [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b +Author: Niklaus Giger <niklaus.giger@nestal.com> +Date: Mon Jun 25 17:03:13 2007 +0200 + + ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt + + This patch prints the DDR status registers upon machine check + interrupt on the 440EPx/GRx. This can be useful especially when + ECC support is enabled. + + I added some small changes to the original patch from Niklaus to + make it compile clean. + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 807018fb7faceb429ce0cb47baa2073746b33a4e +Author: Niklaus Giger <niklaus.giger@nestal.com> +Date: Mon Jun 25 16:50:55 2007 +0200 + + ppc4xx: Fix O=buildir builds + + This patch fixes the problem to assemble cpu/ppc4xx/start.S + experienced last week where building failed having specified + O=../build.sequoia. + + Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> + +commit 466fff1a7bb5fe764a06450626f6098219f446b8 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jun 25 15:57:39 2007 +0200 + + ppc4xx: Add pci_pre_init() for 405 boards + + This patch removes the CFG_PCI_PRE_INIT option completely, since + it's not needed anymore with the patch from Matthias Fuchs with + the "weak" pci_pre_init() implementation. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6f35c53166213c24a5a0e2390ed861136ff73870 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Jun 24 17:41:21 2007 +0200 + + ppc4xx: Maintenance patch for esd's CPCI405 derivats + + -add pci_pre_init() for pci interrupt fixup code + -disable phy sleep mode via reset_phy() function + -use correct io accessors + -cleanup + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Jun 24 17:23:41 2007 +0200 + + ppc4xx: Add pci_pre_init() for 405 boards + + This patch adds support for calling a plattform dependant + pci_pre_init() function for 405 boards. This can be used to + move the current pci_405gp_fixup_irq() function into the + board code. + + This patch also makes the CFG_PCI_PRE_INIT define obsolete. + A default function with 'weak' attribute is used when + a board specific pci_pre_init() is not implemented. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jun 22 23:59:00 2007 +0200 + + Coding stylke cleanup; rebuild CHANGELOG + +commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9 +Author: Igor Lisitsin <igor@emcraft.com> +Date: Wed Apr 18 14:55:19 2007 +0400 + + Adapt log buffer code to support Linux 2.6 + + A new environment variable, "logversion", selects the log buffer + behaviour. If it is not set or set to a value other than 2, then the + old, Linux 2.4.4, behaviour is selected. + + Signed-off-by: Igor Lisitsin <igor@emcraft.com> + -- + +commit a11e06965ec91270c51853407ff1261d3c740386 +Author: Igor Lisitsin <igor@emcraft.com> +Date: Wed Mar 28 19:06:19 2007 +0400 + + Extend POST support for PPC440 + + Added memory, CPU, UART, I2C and SPR POST tests for PPC440. + + Signed-off-by: Igor Lisitsin <igor@emcraft.com> + -- + +commit 566a494f592ae3b3c0785d90d4e1ba45574880c4 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Fri Jun 22 19:11:54 2007 +0200 + + [PCS440EP] upgrade the PCS440EP board: + - Show on the Status LEDs, some States of the board. + - Get the MAC addresses from the EEProm + - use PREBOOT + - use the CF on the board. + - check the U-Boot image in the Flash with a SHA1 + checksum. + - use dynamic TLB entries generation for the SDRAM + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 3a1f5c81b0b9557817a789bece839905581c2205 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 22 16:58:40 2007 +0200 + + ppc4xx: Fix problem with extended program_tlb() funtion + + The recently extended program_tlb() function had a problem when + multiple TLB's had to be setup (for example with 512MB of SDRAM). The + virtual address was not incremented. This patch fixes this issue + and is tested on Katmai with 512MB SDRAM. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Fri Jun 22 14:58:04 2007 +0200 + + [ppc] Fix build breakage for all non-4xx PowerPC variants. + + - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros + - minor 4xx cleanup + +commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jun 20 18:14:24 2007 +0200 + + Coding style cleanup. Refresh CHANGELOG. + +commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024 +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 17:22:44 2007 +0200 + + ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board + + This patch adds a board command to configure the I2C bootstrap EEPROM + values. Right now 533 and 667MHz are supported for booting either via NOR + or NAND FLASH. Here the usage: + + => bootstrap 533 nor ;to configure the board for 533MHz NOR booting + => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit df8a24cdd30151505cf57bbee5289e91bf53bd1b +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 16:42:31 2007 +0200 + + [ppc4xx] Fix problem with NAND booting on AMCC Acadia + + The latest changes showed a problem with the location of the NAND-SPL + image in the OCM and the init-data area (incl. cache). This patch + fixes this problem. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 86ba99e34194394052d24c04dc40d1263d29a26f +Author: Stefan Roese <sr@denx.de> +Date: Tue Jun 19 16:40:58 2007 +0200 + + [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 11:33:41 2007 +0200 + + [ppc4xx] Change lwmon5 port to work with recent 440 exception rework + + Now CONFIG_440 has to be defined in all PPC440 board config files. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit efa35cf12d914d4caba942acd5a6c45f217de302 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Fri Jun 15 11:19:28 2007 +0200 + + ppc4xx: Clean up 440 exceptions handling + + - Introduced dedicated switches for building 440 and 405 images required + for 440-specific machine instructions like 'rfmci' etc. + + - Exception vectors moved to the proper location (_start moved away from + the critical exception handler space, which it occupied) + + - CriticalInput now serviced (with default handler) + + - MachineCheck properly serviced (added a dedicated handler and return + subroutine) + + - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, + unhandled and those not relevant for 4xx were eliminated) + + - Eliminated Linux leftovers, removed dead code + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 08:18:01 2007 +0200 + + [ppc4xx] Add initial lwmon5 board support + + This patch adds initial support for the Liebherr lwmon5 board euqipped + with an AMCC 440EPx PowerPC. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 85f737376d5ff3d5f0d45a8b657686326d175307 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 15 07:39:43 2007 +0200 + + [ppc4xx] Extend 44x GPIO setup with default output state + + The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup + is extended with the default GPIO output state (level). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit dbca208518e5e7f01a6420588d1cd6e60db74c2b +Author: Stefan Roese <sr@denx.de> +Date: Thu Jun 14 11:14:32 2007 +0200 + + [ppc4xx] Extend program_tlb() with virtual & physical addresses + + Now program_tlb() allows to program a TLB (or multiple) with + different virtual and physical addresses. With this change, now one + physical region (e.g. SDRAM) can be mapped 2 times, once with caches + diabled and once with caches enabled. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88 +Author: Detlev Zundel <dzu@denx.de> +Date: Wed May 23 19:02:41 2007 +0200 + + Change 'repeatable' attribute of some commands to sensible values. + + Most prominently this changes 'erase' to be non-repeatable. + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit 5afb202093f6a001797db92cf695b93a70ea9ab4 +Author: Detlev Zundel <dzu@denx.de> +Date: Wed May 23 18:47:48 2007 +0200 + + Fix 'run' not to continue after interrupted command + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Jun 8 14:52:22 2007 +0200 + + TQM5200: Add Flat Device Tree support, update default env. accordingly. + + Signed-off-by: Jan Wrobel <wrr@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 9045f33c023f698660a2e45d1b2194c0711abebc +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Jun 8 10:24:58 2007 +0200 + + Fix config problems on SC3 board; make ide_reset_timeout work. + +commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b +Author: Benoît Monin <bmonin@adeneo.eu> +Date: Fri Jun 8 09:55:24 2007 +0200 + + [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE + + Set the correct value in GPIOx_TCR when configuring the gpio + with CFG_440_GPIO_TABLE. + + Signed-off-by: Benoit Monin <bmonin@adeneo.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jun 6 16:26:56 2007 +0200 + + Coding Style cleanup; generate new CHANGELOG file. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit c440bfe6d6d92d66478a7e84402b31f48413617b Author: Stefan Roese <sr@denx.de> Date: Wed Jun 6 11:42:13 2007 +0200 @@ -328,6 +684,14 @@ Date: Thu May 24 08:22:09 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 822d55365bb557e084d0e33625a6dedcc866110b +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed May 23 14:09:46 2007 -0500 + + Add LIST_86xx MAKEALL target for PowerPC builds. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + commit 9f0077abd69f7a7c756a915b961037302be3e6f2 Author: Stefan Roese <sr@denx.de> Date: Tue May 22 12:48:09 2007 +0200 @@ -376,6 +740,17 @@ Date: Fri May 18 14:33:11 2007 +0100 Makefile permissions +commit 255a3577c848706441daee0174543efe205a77f8 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed May 16 16:52:19 2007 -0500 + + Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx + + For all practical u-boot purposes, TSECs don't differ throughout the + mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + commit 70124c2602ae2d4c5d3dba05b482d91548242de8 Author: Stefano Babic <sbabic@denx.de> Date: Wed May 16 14:49:12 2007 +0200 @@ -417,6 +792,109 @@ Date: Wed May 16 00:13:33 2007 +0200 Coding Style Cleanup, new CHANGELOG +commit 3162eb836903c8b247fdc7470dd39bfa6996f495 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue May 15 23:38:05 2007 +0200 + + Minor coding style cleanup. + +commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e +Author: mushtaq khan <mushtaq_k@procsys.com> +Date: Fri Apr 20 14:23:02 2007 +0530 + + Add driver for S-ATA-controller on Intel processors with South + Bridge, ICH-5, ICH-6 and ICH-7. + + Implementation: + + 1. Code is divided in to two files. All functions, which are + controller specific are kept in "drivers/ata_piix.c" file and + functions, which are not controller specific, are kept in + "common/cmd_sata.c" file. + + 2. Reading and Writing from the S-ATA drive is done using PIO method. + + 3. Driver can be configured for 48-bit addressing by defining macro + CONFIG_LBA48, if this macro is not defined driver uses the 28-bit + addressing. + + 4. S-ATA read function is hooked to the File system, commands like + ext2ls and ext2load file can be used. This has been tested. + + 5. U-Boot command "SATA_init" is added, which initializes the S-ATA + controller and identifies the S-ATA drives connected to it. + + 6. U-Boot command "sata" is added, which is used to read/write, print + partition table and get info about the drives present. This I have + implemented in same way as "ide" command is implemented in U-Boot. + + 7. This driver is for S-ATA in native mode. + + 8. This driver does not support the Native command queuing and + Hot-plugging. + + Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> + +commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 +Author: mushtaq khan <mushtaq_k@procsys.com> +Date: Mon Apr 30 15:57:22 2007 +0530 + + Fixes bug clearing the bss section for i386 + + Hi, + There is a bug in the code of clearing the bss section for processor + i386.(File: cpu/i386/start.S) + In the code, bss_start addr (starting addr of bss section) is put into + the register %eax, but the code which clears the bss section refers to + the addr pointed by %edi. + + This patch fixes this bug by putting bss_start into %edi register. + + Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> + +commit c3243cf7b490057277d61acffe4ad0946f9eb4a4 +Author: Joe Hamman <joe.hamman@embeddedspecialties.com> +Date: Mon Apr 30 16:47:28 2007 -0500 + + Add support for BCM5464 Quad Phy + + Added support for Broadcom's BCM5464 Quad Phy + + Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> + +commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a +Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> +Date: Wed May 9 08:10:57 2007 +0800 + + Search the exception table with linear algorithm + + Search the exception table with linear algorithm instead of + bisecting algorithm. + Because the exception table might be unsorted. + + Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> + +commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3 +Author: Aubrey.Li <aubrey.adi@gmail.com> +Date: Mon May 14 11:47:35 2007 +0800 + + Fix compilation issues on MACOSX + + Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com> + Signed-off-by: Aubrey Li <aubrey.adi@gmail.com> + +commit 56fd7162985c412317bbf763a225fba23c64fd31 +Author: Stephen Williams <steve@icarus.com> +Date: Tue May 15 07:55:42 2007 -0700 + + Fix for compile of JSE target + + The attached patch fixes the compile of the JSE board in the + denx git as of 14 may 2007. It is an extremely simple patch, + it just adds the missing define of CFG_SYSTEMACE_WIDTH. + + Fix to compile JSE against 20070514 git of u-boot + commit 61936667e86a250ae12fd2dc189d3588f0a59e0b Author: Stefan Roese <sr@denx.de> Date: Fri May 11 12:01:49 2007 +0200 @@ -756,6 +1234,20 @@ Date: Sat May 5 08:29:01 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 2f550ab976405300f5b07bf2890800840d0aa05f +Author: Timur Tabi <timur@freescale.com> +Date: Sat May 5 08:12:30 2007 +0200 + + 5xxx: write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, ftp_cpu_setup() + should write the MAC address to mac-address and local-mac-address, if they + exist. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + commit a79886590593ba1d667c840caa4940c61639f18f Author: Thomas Knobloch <knobloch@siemens.com> Date: Sat May 5 07:04:42 2007 +0200 @@ -919,12 +1411,35 @@ Date: Sun Apr 29 14:13:01 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 +Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> +Date: Sun Apr 29 14:01:54 2007 +0200 + + [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message + + MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up + message. Use PVR to distinguish between the two variants, and print proper CPU + information. + + Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + commit 5c5d3242935cf3543af01142627494434834cf98 Author: Kim Phillips <kim.phillips@freescale.com> Date: Wed Apr 25 12:34:38 2007 -0500 mpc83xx: minor fixups for 8313rdb introduction +commit ada4d40091f6ed4a4f0040e08d20db21967e4a67 +Author: Ladislav Michl <ladis@linux-mips.org> +Date: Wed Apr 25 16:01:26 2007 +0200 + + [PATCH] simplify silent console + + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + Acked-by: Stefan Roese <sr@denx.de> + commit 144876a380f5756f57412caf74c1d6dc201dd796 Author: Michal Simek <monstr@monstr.eu> Date: Tue Apr 24 23:01:02 2007 +0200 @@ -1221,6 +1736,58 @@ Date: Mon Apr 16 14:31:55 2007 -0500 Signed-off-by: Scott Wood <scottwood@freescale.com> +commit 7fc4c71a143be8666d70803fb25ae60379c95622 +Author: Stefan Roese <sr@denx.de> +Date: Mon Apr 23 15:39:59 2007 +0200 + + Fix file mode + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 38257988abfe74d459ca2ad748b109ca04e4efe1 +Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> +Date: Mon Apr 23 15:30:39 2007 +0200 + + [PATCH] Avoid assigning PCI resources from zero address + + If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE + core complains and IDE drivers fails to work. Also, assigning zero to a BAR + was illegal according to PCI 2.1 (the later revisions seem to have excluded the + sentence about "0" being considered an invalid address) -- so, use a reasonable + starting value of 0x1000 (that's what the most Linux archs are using). + + Alternatively, one might have fixed the calls to pci_set_region() individually + (some code even seems to have taken care of this issue) but that would have + been a lot more work. :-) + + Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit afb903a2eb9436baa9270ccc0c27082d86497d89 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Mon Apr 23 14:00:11 2007 +0200 + + [patch] setenv(...) can delete environmentalvariables + + update setenv() function so that entering a NULL value for the + variable's value will delete the environmental variable + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 36f104e5caa747d568eff26b369565af57c2ffa6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Apr 23 13:54:24 2007 +0200 + + [patch] use unsigned char in smc91111 driver for mac + + the v_mac variable in the smc91111 driver is declared as a signed char ... + this causes problems when one of the bytes in the MAC is "signed" like 0xE0 + because when it gets printed out, you get a display like: + 0xFFFFFFE0 and that's no good + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 Author: Stefan Roese <sr@denx.de> Date: Mon Apr 23 12:00:22 2007 +0200 diff --git a/MAINTAINERS b/MAINTAINERS index 2eaef1784ea..693b1157290 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -282,6 +282,7 @@ Stefan Roese <sr@denx.de> bunbinga PPC405EP ebony PPC440GP katmai PPC440SPe + lwmon5 PPC440EPx ocotea PPC440GX p3p440 PPC440GP pcs440ep PPC440EP @@ -83,15 +83,15 @@ LIST_4xx=" \ csb272 csb472 DASA_SIM DP405 \ DU405 ebony ERIC EXBITGEN \ G2000 HH405 HUB405 JSE \ - KAREF katmai luan METROBOX \ - MIP405 MIP405T ML2 ml300 \ - ocotea OCRTC ORSG p3p440 \ - PCI405 pcs440ep PIP405 PLU405 \ - PMC405 PPChameleonEVB sbc405 sc3 \ - sequoia sequoia_nand taishan VOH405 \ - VOM405 W7OLMC W7OLMG walnut \ - WUH405 XPEDITE1K yellowstone yosemite \ - yucca \ + KAREF katmai luan lwmon5 \ + METROBOX MIP405 MIP405T ML2 \ + ml300 ocotea OCRTC ORSG \ + p3p440 PCI405 pcs440ep PIP405 \ + PLU405 PMC405 PPChameleonEVB sbc405 \ + sc3 sequoia sequoia_nand taishan \ + VOH405 VOM405 W7OLMC W7OLMG \ + walnut WUH405 XPEDITE1K yellowstone \ + yosemite yucca \ " ######################################################################### @@ -151,6 +151,14 @@ LIST_85xx=" \ " ######################################################################### +## MPC86xx Systems +######################################################################### + +LIST_86xx=" \ + MPC8641HPCN \ +" + +######################################################################### ## 74xx/7xx Systems ######################################################################### @@ -170,6 +178,7 @@ LIST_ppc="${LIST_5xx} ${LIST_5xxx} \ ${LIST_8220} ${LIST_824x} ${LIST_8260} \ ${LIST_83xx} \ ${LIST_85xx} \ + ${LIST_86xx} \ ${LIST_4xx} \ ${LIST_74xx} ${LIST_7xx}" @@ -356,7 +365,7 @@ do microblaze| \ mips|mips_el| \ nios|nios2| \ - ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \ + ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \ x86|I486) for target in `eval echo '$LIST_'${arg}` do @@ -216,6 +216,8 @@ LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/drivers/libpostdrivers.a LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ "post/lib_$(ARCH)/libpost$(ARCH).a"; fi) +LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \ + "post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi) LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \ "post/cpu/$(CPU)/libpost$(CPU).a"; fi) LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \ @@ -247,7 +249,7 @@ __LIBS := $(subst $(obj),,$(LIBS)) ######################################################################### ######################################################################### -ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) +ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) all: $(ALL) @@ -267,6 +269,9 @@ $(obj)u-boot.img: $(obj)u-boot.bin sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ +$(obj)u-boot.sha1: $(obj)u-boot.bin + ./tools/ubsha1 $(obj)u-boot.bin + $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ @@ -1141,6 +1146,9 @@ katmai_config: unconfig luan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc +lwmon5_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 + METROBOX_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst @@ -2469,7 +2477,7 @@ clean: $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \ $(obj)examples/test_burst rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \ - $(obj)tools/gen_eth_addr + $(obj)tools/gen_eth_addr $(obj)tools/ubsha1 rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend @@ -2492,7 +2500,7 @@ clobber: clean rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h rm -fr $(obj)*.*~ rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) - rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c + rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm [ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f @@ -1704,28 +1704,69 @@ The following options need to be configured: -31 post/post.c POST test failed, detected by post_output_backlog() -32 post/post.c POST test failed, detected by post_run_single() - -1 common/cmd_doc.c Bad usage of "doc" command - -1 common/cmd_doc.c No boot device - -1 common/cmd_doc.c Unknown Chip ID on boot device - -1 common/cmd_doc.c Read Error on boot device - -1 common/cmd_doc.c Image header has bad magic number - - -1 common/cmd_ide.c Bad usage of "ide" command - -1 common/cmd_ide.c No boot device - -1 common/cmd_ide.c Unknown boot device - -1 common/cmd_ide.c Unknown partition table - -1 common/cmd_ide.c Invalid partition type - -1 common/cmd_ide.c Read Error on boot device - -1 common/cmd_ide.c Image header has bad magic number - - -1 common/cmd_nand.c Bad usage of "nand" command - -1 common/cmd_nand.c No boot device - -1 common/cmd_nand.c Unknown Chip ID on boot device - -1 common/cmd_nand.c Read Error on boot device - -1 common/cmd_nand.c Image header has bad magic number - - -1 common/env_common.c Environment has a bad CRC, using default - + 34 common/cmd_doc.c before loading a Image from a DOC device + -35 common/cmd_doc.c Bad usage of "doc" command + 35 common/cmd_doc.c correct usage of "doc" command + -36 common/cmd_doc.c No boot device + 36 common/cmd_doc.c correct boot device + -37 common/cmd_doc.c Unknown Chip ID on boot device + 37 common/cmd_doc.c correct chip ID found, device available + -38 common/cmd_doc.c Read Error on boot device + 38 common/cmd_doc.c reading Image header from DOC device OK + -39 common/cmd_doc.c Image header has bad magic number + 39 common/cmd_doc.c Image header has correct magic number + -40 common/cmd_doc.c Error reading Image from DOC device + 40 common/cmd_doc.c Image header has correct magic number + 41 common/cmd_ide.c before loading a Image from a IDE device + -42 common/cmd_ide.c Bad usage of "ide" command + 42 common/cmd_ide.c correct usage of "ide" command + -43 common/cmd_ide.c No boot device + 43 common/cmd_ide.c boot device found + -44 common/cmd_ide.c Device not available + 44 common/cmd_ide.c Device available + -45 common/cmd_ide.c wrong partition selected + 45 common/cmd_ide.c partition selected + -46 common/cmd_ide.c Unknown partition table + 46 common/cmd_ide.c valid partition table found + -47 common/cmd_ide.c Invalid partition type + 47 common/cmd_ide.c correct partition type + -48 common/cmd_ide.c Error reading Image Header on boot device + 48 common/cmd_ide.c reading Image Header from IDE device OK + -49 common/cmd_ide.c Image header has bad magic number + 49 common/cmd_ide.c Image header has correct magic number + -50 common/cmd_ide.c Image header has bad checksum + 50 common/cmd_ide.c Image header has correct checksum + -51 common/cmd_ide.c Error reading Image from IDE device + 51 common/cmd_ide.c reading Image from IDE device OK + 52 common/cmd_nand.c before loading a Image from a NAND device + -53 common/cmd_nand.c Bad usage of "nand" command + 53 common/cmd_nand.c correct usage of "nand" command + -54 common/cmd_nand.c No boot device + 54 common/cmd_nand.c boot device found + -55 common/cmd_nand.c Unknown Chip ID on boot device + 55 common/cmd_nand.c correct chip ID found, device available + -56 common/cmd_nand.c Error reading Image Header on boot device + 56 common/cmd_nand.c reading Image Header from NAND device OK + -57 common/cmd_nand.c Image header has bad magic number + 57 common/cmd_nand.c Image header has correct magic number + -58 common/cmd_nand.c Error reading Image from NAND device + 58 common/cmd_nand.c reading Image from NAND device OK + + -60 common/env_common.c Environment has a bad CRC, using default + + 64 net/eth.c starting with Ethernetconfiguration. + -64 net/eth.c no Ethernet found. + 65 net/eth.c Ethernet found. + + -80 common/cmd_net.c usage wrong + 80 common/cmd_net.c before calling NetLoop() + -81 common/cmd_net.c some error in NetLoop() occured + 81 common/cmd_net.c NetLoop() back without error + -82 common/cmd_net.c size == 0 (File with size 0 loaded) + 82 common/cmd_net.c trying automatic boot + 83 common/cmd_net.c running autoscript + -83 common/cmd_net.c some error in automatic boot or autoscript + 84 common/cmd_net.c end without errors Modem Support: -------------- diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile index ddbcb8091f7..c56b2733a93 100644 --- a/board/amcc/acadia/Makefile +++ b/board/amcc/acadia/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cmd_acadia.o cpr.o memory.o +COBJS = $(BOARD).o cmd_acadia.o memory.o pll.o SOBJS = SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c index 46d63e6308b..8b82ea40ede 100644 --- a/board/amcc/acadia/acadia.c +++ b/board/amcc/acadia/acadia.c @@ -31,13 +31,13 @@ static void acadia_gpio_init(void) /* * GPIO0 setup (select GPIO or alternate function) */ - out32(GPIO0_OSRL, CFG_GPIO0_OSRL); - out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */ - out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L); - out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */ - out32(GPIO0_TSRL, CFG_GPIO0_TSRL); - out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */ - out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */ + out32(GPIO0_OSRL, CFG_GPIO0_OSRL); + out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */ + out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L); + out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */ + out32(GPIO0_TSRL, CFG_GPIO0_TSRL); + out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */ + out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */ /* * Ultra (405EZ) was nice enough to add another GPIO controller @@ -55,10 +55,12 @@ int board_early_init_f(void) { unsigned int reg; +#if !defined(CONFIG_NAND_U_BOOT) /* don't reinit PLL when booting via I2C bootstrap option */ mfsdr(SDR_PINSTP, reg); if (reg != 0xf0000000) board_pll_init_f(); +#endif acadia_gpio_init(); diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c index 25904d3b94a..9346d2c52fb 100644 --- a/board/amcc/acadia/memory.c +++ b/board/amcc/acadia/memory.c @@ -31,6 +31,8 @@ #include <asm/io.h> #include <asm/gpio.h> +extern void board_pll_init_f(void); + /* * sdram_init - Dummy implementation for start.S, spd_sdram used on this board! */ @@ -67,6 +69,15 @@ static void cram_bcr_write(u32 wr_val) long int initdram(int board_type) { +#if defined(CONFIG_NAND_SPL) + u32 reg; + + /* don't reinit PLL when booting via I2C bootstrap option */ + mfsdr(SDR_PINSTP, reg); + if (reg != 0xf0000000) + board_pll_init_f(); +#endif + #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) int i; u32 val; diff --git a/board/amcc/acadia/cpr.c b/board/amcc/acadia/pll.c index 9dcce35c89b..9dcce35c89b 100644 --- a/board/amcc/acadia/cpr.c +++ b/board/amcc/acadia/pll.c diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 2e651df3b79..caf66909b99 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -416,7 +416,7 @@ int testdram(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -457,7 +457,7 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index dcafac950d6..ededb3e7e11 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -207,14 +207,14 @@ long int fixed_sdram(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long strap; /*--------------------------------------------------------------------------+ - * The ebony board is always configured as the host & requires the - * PCI arbiter to be enabled. + * The ebony board is always configured as the host & requires the + * PCI arbiter to be enabled. *--------------------------------------------------------------------------*/ strap = mfdcr(cpc0_strp1); if ((strap & 0x00100000) == 0) { @@ -224,7 +224,7 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 286bdc1f21d..b804d55f2e7 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -292,7 +292,7 @@ int testdram (void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose ) { unsigned long strap; @@ -309,7 +309,7 @@ int pci_pre_init(struct pci_controller * hose ) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index 778aafc7660..2eff3b33fde 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -161,7 +161,7 @@ int testdram(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init( struct pci_controller *hose ) { unsigned long strap; @@ -179,7 +179,7 @@ int pci_pre_init( struct pci_controller *hose ) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index 3f6d2042d72..3bd1b814006 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -306,7 +306,7 @@ long int fixed_sdram (void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose ) { unsigned long strap; @@ -323,7 +323,7 @@ int pci_pre_init(struct pci_controller * hose ) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile index 06ef7f93317..e1c9ad4d694 100644 --- a/board/amcc/sequoia/Makefile +++ b/board/amcc/sequoia/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o sdram.o +COBJS = $(BOARD).o cmd_sequoia.o sdram.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c new file mode 100644 index 00000000000..6fc60eaaa2f --- /dev/null +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -0,0 +1,111 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> + +static u8 boot_533_nor[] = { + 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 +}; + +static u8 boot_533_nand[] = { + 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xd0, 0x10, + 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 +}; + +static u8 boot_667_nor[] = { + 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 +}; + +static u8 boot_667_nand[] = { + 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x10, + 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 +}; + +static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + u8 chip; + u8 *buf; + int cpu_freq; + + if (argc < 3) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + cpu_freq = simple_strtol(argv[1], NULL, 10); + if (!((cpu_freq == 533) || (cpu_freq == 667))) { + printf("Unsupported cpu-frequency - only 533 and 667 supported\n"); + return 1; + } + + /* use 0x52 as I2C EEPROM address for now */ + chip = 0x52; + + if ((strcmp(argv[2], "nor") != 0) && + (strcmp(argv[2], "nand") != 0)) { + printf("Unsupported boot-device - only nor|nand support\n"); + return 1; + } + + if (strcmp(argv[2], "nand") == 0) { + switch (cpu_freq) { + default: + case 533: + buf = boot_533_nand; + break; + case 667: + buf = boot_667_nand; + break; + } + } else { + switch (cpu_freq) { + default: + case 533: + buf = boot_533_nor; + break; + case 667: + buf = boot_667_nor; + break; + } + } + + if (i2c_write(chip, 0, 1, buf, 16) != 0) + printf("Error writing to EEPROM at address 0x%x\n", chip); + udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); + + printf("Done\n"); + printf("Please power-cycle the board for the changes to take effect\n"); + + return 0; +} + +U_BOOT_CMD( + bootstrap, 3, 0, do_bootstrap, + "bootstrap - program the I2C bootstrap EEPROM\n", + "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n" + ); diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index ba365aea318..f823117687e 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -25,7 +25,6 @@ #include <common.h> #include <asm/processor.h> #include <ppc440.h> -#include "sequoia.h" DECLARE_GLOBAL_DATA_PTR; @@ -226,7 +225,7 @@ int misc_init_r(void) if (act == NULL || strcmp(act, "hostdev") == 0) { /* SDR Setting */ mfsdr(SDR0_PFC1, sdr0_pfc1); - mfsdr(SDR0_USB0, usb2d0cr); + mfsdr(SDR0_USB2D0CR, usb2d0cr); mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); mfsdr(SDR0_USB2H0CR, usb2h0cr); @@ -254,7 +253,7 @@ int misc_init_r(void) sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/ mtsdr(SDR0_PFC1, sdr0_pfc1); - mtsdr(SDR0_USB0, usb2d0cr); + mtsdr(SDR0_USB2D0CR, usb2d0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); @@ -298,7 +297,7 @@ int misc_init_r(void) /* SDR Setting */ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); mfsdr(SDR0_USB2H0CR, usb2h0cr); - mfsdr(SDR0_USB0, usb2d0cr); + mfsdr(SDR0_USB2D0CR, usb2d0cr); mfsdr(SDR0_PFC1, sdr0_pfc1); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; @@ -323,7 +322,7 @@ int misc_init_r(void) mtsdr(SDR0_USB2H0CR, usb2h0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mtsdr(SDR0_USB0, usb2d0cr); + mtsdr(SDR0_USB2D0CR, usb2d0cr); mtsdr(SDR0_PFC1, sdr0_pfc1); /*clear resets*/ @@ -426,23 +425,10 @@ int testdram(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; -#if 0 - /*--------------------------------------------------------------------------+ - * Cactus is always configured as the host & requires the - * PCI arbiter to be enabled ??? - *--------------------------------------------------------------------------*/ - unsigned long strap; - mfsdr(sdr_sdstp1, strap); - if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) { - printf("PCI: SDR0_STRP1[PAE] not set.\n"); - printf("PCI: Configuration aborted.\n"); - return 0; - } -#endif /*-------------------------------------------------------------------------+ | Set priority for all PLB3 devices to 0. @@ -480,7 +466,7 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init @@ -586,3 +572,13 @@ int is_pci_host(struct pci_controller *hose) return (1); } #endif /* defined(CONFIG_PCI) */ +#if defined(CONFIG_POST) +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return 0; /* No hotkeys supported */ +} +#endif /* CONFIG_POST */ diff --git a/board/amcc/sequoia/sequoia.h b/board/amcc/sequoia/sequoia.h deleted file mode 100644 index 1d44b164649..00000000000 --- a/board/amcc/sequoia/sequoia.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2006 - * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -/*----------------------------------------------------------------------------+ - | EBC Configuration Register - EBC0_CFG - +----------------------------------------------------------------------------*/ -/* External Bus Three-State Control */ -#define EBC0_CFG_EBTC_DRIVEN 0x80000000 -/* Device-Paced Time-out Disable */ -#define EBC0_CFG_PTD_ENABLED 0x00000000 -/* Ready Timeout Count */ -#define EBC0_CFG_RTC_MASK 0x38000000 -#define EBC0_CFG_RTC_16PERCLK 0x00000000 -#define EBC0_CFG_RTC_32PERCLK 0x08000000 -#define EBC0_CFG_RTC_64PERCLK 0x10000000 -#define EBC0_CFG_RTC_128PERCLK 0x18000000 -#define EBC0_CFG_RTC_256PERCLK 0x20000000 -#define EBC0_CFG_RTC_512PERCLK 0x28000000 -#define EBC0_CFG_RTC_1024PERCLK 0x30000000 -#define EBC0_CFG_RTC_2048PERCLK 0x38000000 -/* External Master Priority Low */ -#define EBC0_CFG_EMPL_LOW 0x00000000 -#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000 -#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000 -#define EBC0_CFG_EMPL_HIGH 0x06000000 -/* External Master Priority High */ -#define EBC0_CFG_EMPH_LOW 0x00000000 -#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000 -#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000 -#define EBC0_CFG_EMPH_HIGH 0x01800000 -/* Chip Select Three-State Control */ -#define EBC0_CFG_CSTC_DRIVEN 0x00400000 -/* Burst Prefetch */ -#define EBC0_CFG_BPF_ONEDW 0x00000000 -#define EBC0_CFG_BPF_TWODW 0x00100000 -#define EBC0_CFG_BPF_FOURDW 0x00200000 -/* External Master Size */ -#define EBC0_CFG_EMS_8BIT 0x00000000 -/* Power Management Enable */ -#define EBC0_CFG_PME_DISABLED 0x00000000 -#define EBC0_CFG_PME_ENABLED 0x00020000 -/* Power Management Timer */ -#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12) - -#define SDR0_USB0 0x0320 /* USB Control Register */ diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 1a2e53b1abc..bc976c75261 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -236,7 +236,7 @@ int testdram (void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose ) { unsigned long strap; @@ -253,7 +253,7 @@ int pci_pre_init(struct pci_controller * hose ) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index c2e12ba12ea..912f09ee439 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -385,7 +385,7 @@ int testdram(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -426,7 +426,7 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 90eaab1c80b..7316c34b4a7 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -604,7 +604,7 @@ int testdram (void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose ) { unsigned long strap; @@ -621,7 +621,7 @@ int pci_pre_init(struct pci_controller * hose ) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/bf537-stamp/ether_bf537.c b/board/bf537-stamp/ether_bf537.c index f00837aad2c..807b9e839b4 100644 --- a/board/bf537-stamp/ether_bf537.c +++ b/board/bf537-stamp/ether_bf537.c @@ -48,7 +48,7 @@ #define TXBUF_BASE_ADDR 0xFF800000 #define TX_BUF_CNT 1 -#define TOUT_LOOP 1000000 +#define TOUT_LOOP 1000000 ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT]; ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX]; diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h index acc1e8638bf..1fa7a10bdac 100644 --- a/board/bf537-stamp/flash-defines.h +++ b/board/bf537-stamp/flash-defines.h @@ -44,9 +44,9 @@ #define ERASE_SECT 6 #define READ 7 #define GET_SECTNUM 8 -#define FLASH_START_L 0x0000 -#define FLASH_START_H 0x2000 -#define FLASH_MAN_ST 2 +#define FLASH_START_L 0x0000 +#define FLASH_START_H 0x2000 +#define FLASH_MAN_ST 2 #define RESET_VAL 0xF0 flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; diff --git a/board/bf537-stamp/stm_m25p64.c b/board/bf537-stamp/stm_m25p64.c index 7077e85f412..d9c08ee8e66 100644 --- a/board/bf537-stamp/stm_m25p64.c +++ b/board/bf537-stamp/stm_m25p64.c @@ -9,7 +9,7 @@ /* Application definitions */ -#define NUM_SECTORS 128 /* number of sectors */ +#define NUM_SECTORS 128 /* number of sectors */ #define SECTOR_SIZE 0x10000 #define NOP_NUM 1000 diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S index 3fb2d0cc60b..8632097b613 100644 --- a/board/bf537-stamp/u-boot.lds.S +++ b/board/bf537-stamp/u-boot.lds.S @@ -33,7 +33,7 @@ SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); __DYNAMIC = 0; */ MEMORY { - ram : ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024) + ram : ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024) l1_code : ORIGIN = 0xFFA00000, LENGTH = 0xC000 l1_data : ORIGIN = 0xFF900000, LENGTH = 0x4000 } @@ -47,11 +47,11 @@ SECTIONS .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } + .rela.text : { *(.rela.text) } .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } .rel.got : { *(.rel.got) } .rela.got : { *(.rela.got) } .rel.ctors : { *(.rel.ctors) } @@ -68,7 +68,7 @@ SECTIONS .text : { /* WARNING - the following is hand-optimized to fit within */ - /* the sector before the environment sector. If it throws */ + /* the sector before the environment sector. If it throws */ /* an error during compilation remove an object here to get */ /* it linked after the configuration sector. */ diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c index 929ff2e6629..b7236417e8b 100644 --- a/board/cds/mpc8548cds/mpc8548cds.c +++ b/board/cds/mpc8548cds/mpc8548cds.c @@ -345,23 +345,23 @@ int last_stage_init(void) /* This is needed to get the RGMII working for the 1.3+ * CDS cards */ if (get_board_version() == 0x13) { - miiphy_write(CONFIG_MPC85XX_TSEC1_NAME, + miiphy_write(CONFIG_TSEC1_NAME, TSEC1_PHY_ADDR, 29, 18); - miiphy_read(CONFIG_MPC85XX_TSEC1_NAME, + miiphy_read(CONFIG_TSEC1_NAME, TSEC1_PHY_ADDR, 30, &temp); temp = (temp & 0xf03f); temp |= 2 << 9; /* 36 ohm */ temp |= 2 << 6; /* 39 ohm */ - miiphy_write(CONFIG_MPC85XX_TSEC1_NAME, + miiphy_write(CONFIG_TSEC1_NAME, TSEC1_PHY_ADDR, 30, temp); - miiphy_write(CONFIG_MPC85XX_TSEC1_NAME, + miiphy_write(CONFIG_TSEC1_NAME, TSEC1_PHY_ADDR, 29, 3); - miiphy_write(CONFIG_MPC85XX_TSEC1_NAME, + miiphy_write(CONFIG_TSEC1_NAME, TSEC1_PHY_ADDR, 30, 0x8000); } diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index f80361081a6..69cb8cef562 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -23,13 +23,15 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <command.h> #include <malloc.h> #include <net.h> +#include <pci.h> DECLARE_GLOBAL_DATA_PTR; -extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/ +extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/ #if 0 #define FPGA_DEBUG #endif @@ -52,8 +54,6 @@ const unsigned char fpgadata[] = * include common fpga code (for esd boards) */ #include "../common/fpga.c" - - #include "../common/auto_update.h" #ifdef CONFIG_CPCI405AB @@ -86,13 +86,11 @@ au_image_t au_image[] = { int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); - /* Prototypes */ int cpci405_version(void); int gunzip(void *, int, unsigned char *, unsigned long *); void lxt971_no_sleep(void); - int board_early_init_f (void) { #ifndef CONFIG_CPCI405_VER2 @@ -111,10 +109,10 @@ int board_early_init_f (void) /* * First pull fpga-prg pin low, to disable fpga logic (on version 2 board) */ - out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ - out32(GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */ + out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ + out32(GPIO0_TCR, CFG_FPGA_PRG); /* setup for output */ out32(GPIO0_OR, CFG_FPGA_PRG); /* set output pins to high */ - out32(GPIO0_OR, 0); /* pull prg low */ + out32(GPIO0_OR, 0); /* pull prg low */ /* * Boot onboard FPGA @@ -176,47 +174,48 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ +#ifdef CONFIG_CPCI405_6U if (cpci405_version() == 3) { - mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ + mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ } else { - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ } - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ +#else + mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ +#endif + mtdcr(uictr, 0x10000000); /* set int trigger levels */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ return 0; } - /* ------------------------------------------------------------------------- */ int ctermm2(void) { #ifdef CONFIG_CPCI405_VER2 - return 0; /* no, board is cpci405 */ + return 0; /* no, board is cpci405 */ #else if ((*(unsigned char *)0xf0000400 == 0x00) && (*(unsigned char *)0xf0000401 == 0x01)) - return 0; /* no, board is cpci405 */ + return 0; /* no, board is cpci405 */ else - return -1; /* yes, board is cterm-m2 */ + return -1; /* yes, board is cterm-m2 */ #endif } - int cpci405_host(void) { if (mfdcr(strap) & PSR_PCI_ARBIT_EN) - return -1; /* yes, board is cpci405 host */ + return -1; /* yes, board is cpci405 host */ else - return 0; /* no, board is cpci405 adapter */ + return 0; /* no, board is cpci405 adapter */ } - int cpci405_version(void) { unsigned long cntrl0Reg; @@ -227,10 +226,10 @@ int cpci405_version(void) */ cntrl0Reg = mfdcr(cntrl0); mtdcr(cntrl0, cntrl0Reg | 0x03000000); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00180000); - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00180000); - udelay(1000); /* wait some time before reading input */ - value = in32(GPIO0_IR) & 0x00180000; /* get config bits */ + out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000); + out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000); + udelay(1000); /* wait some time before reading input */ + value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */ /* * Restore GPIO settings @@ -245,7 +244,7 @@ int cpci405_version(void) /* CS2==0 && CS3==1 -> version 2 */ return 2; case 0x00100000: - /* CS2==1 && CS3==0 -> version 3 */ + /* CS2==1 && CS3==0 -> version 3 or 6U board */ return 3; case 0x00000000: /* CS2==0 && CS3==0 -> version 4 */ @@ -256,13 +255,11 @@ int cpci405_version(void) } } - int misc_init_f (void) { return 0; /* dummy implementation */ } - int misc_init_r (void) { unsigned long cntrl0Reg; @@ -283,7 +280,6 @@ int misc_init_r (void) * On CPCI-405 version 2 the environment is saved in eeprom! * FPGA can be gzip compressed (malloc) and booted this late. */ - if (cpci405_version() >= 2) { /* * Setup GPIO pins (CS6+CS7 as GPIO) @@ -354,6 +350,7 @@ int misc_init_r (void) SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); udelay(1000); /* wait 1ms */ +#ifdef CONFIG_CPCI405_6U if (cpci405_version() == 3) { volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR; volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR; @@ -375,6 +372,7 @@ int misc_init_r (void) udelay(100); *fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET); } +#endif } else { puts("\n*** U-Boot Version does not match Board Version!\n"); @@ -425,7 +423,6 @@ int misc_init_r (void) return (0); } - /* * Check Board Identity: */ @@ -481,7 +478,7 @@ int checkboard (void) } #ifndef CONFIG_CPCI405_VER2 - puts ("\nFPGA: "); + puts ("\nFPGA: "); /* display infos on fpgaimage */ index = 15; @@ -493,12 +490,6 @@ int checkboard (void) #endif putc ('\n'); - - /* - * Disable sleep mode in LXT971 - */ - lxt971_no_sleep(); - return 0; } @@ -511,22 +502,18 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } -/* ------------------------------------------------------------------------- */ - -int testdram (void) +void reset_phy(void) { - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); +#ifdef CONFIG_LXT971_NO_SLEEP - return (0); + /* + * Disable sleep mode in LXT971 + */ + lxt971_no_sleep(); +#endif } /* ------------------------------------------------------------------------- */ @@ -551,14 +538,47 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ #endif /* CONFIG_CPCI405_VER2 */ +#if defined(CONFIG_PCI) +void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + unsigned char int_line = 0xff; + + /* + * Write pci interrupt line register (cpci405 specific) + */ + switch (PCI_DEV(dev) & 0x03) { + case 0: + int_line = 27 + 2; + break; + case 1: + int_line = 27 + 3; + break; + case 2: + int_line = 27 + 0; + break; + case 3: + int_line = 27 + 1; + break; + } + + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line); +} + +int pci_pre_init(struct pci_controller *hose) +{ + hose->fixup_irq = cpci405_pci_fixup_irq; + return 1; +} +#endif /* defined(CONFIG_PCI) */ + #ifdef CONFIG_CPCI405AB -#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ +#define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ |= CFG_FPGA_MODE_1WIRE_DIR) -#define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ +#define ONE_WIRE_SET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ &= ~CFG_FPGA_MODE_1WIRE_DIR) -#define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \ +#define ONE_WIRE_GET (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_STATUS) \ & CFG_FPGA_MODE_1WIRE) /* @@ -581,7 +601,6 @@ int OWTouchReset(void) return result; } - /* * Send 1 a 1-wire write bit. * Provide 10us recovery time. @@ -607,7 +626,6 @@ void OWWriteBit(int bit) } } - /* * Read a bit from the 1-wire bus and return it. * Provide 10us recovery time. @@ -627,7 +645,6 @@ int OWReadBit(void) return result; } - void OWWriteByte(int data) { int loop; @@ -638,7 +655,6 @@ void OWWriteByte(int data) } } - int OWReadByte(void) { int loop, result = 0; @@ -653,7 +669,6 @@ int OWReadByte(void) return result; } - int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { volatile unsigned short val; @@ -694,7 +709,6 @@ U_BOOT_CMD( NULL ); - #define CFG_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT28WC32 */ #define CFG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars*/ diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c index a523db1a487..8fd081fef3a 100644 --- a/board/hermes/hermes.c +++ b/board/hermes/hermes.c @@ -597,6 +597,7 @@ void show_boot_progress (int status) { volatile immap_t *immr = (immap_t *) CFG_IMMR; + if (status < -32) status = -1; /* let things compatible */ status ^= 0x0F; status = (status & 0x0F) << 14; immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status; diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c index 14fd28f56fc..897787bcf7a 100644 --- a/board/logodl/logodl.c +++ b/board/logodl/logodl.c @@ -107,6 +107,7 @@ void logodl_set_led(int led, int state) void show_boot_progress (int status) { + if (status < -32) status = -1; /* let things compatible */ /* switch(status) { case 1: logodl_set_led(0,1); break; diff --git a/board/lwmon5/Makefile b/board/lwmon5/Makefile new file mode 100644 index 00000000000..06ef7f93317 --- /dev/null +++ b/board/lwmon5/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2002-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o sdram.o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/lwmon5/config.mk b/board/lwmon5/config.mk new file mode 100644 index 00000000000..bf2b8798c1c --- /dev/null +++ b/board/lwmon5/config.mk @@ -0,0 +1,39 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# lwmon5 (440EPx) +# + +ifndef TEXT_BASE +TEXT_BASE = 0xFFF80000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/lwmon5/init.S b/board/lwmon5/init.S new file mode 100644 index 00000000000..6798e80985d --- /dev/null +++ b/board/lwmon5/init.S @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <ppc_asm.tmpl> +#include <config.h> +#include <asm-ppc/mmu.h> + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ + tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G) + + /* + * TLB entries for SDRAM are not needed on this platform. + * They are dynamically generated in the SPD DDR(2) detection + * routine. + */ + +#ifdef CFG_INIT_RAM_DCACHE + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry(CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) +#endif + + /* TLB-entry for PCI Memory */ + tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I) + + /* TLB-entry for the FPGA Chip select 2 */ + tlbentry(CFG_FPGA_BASE_0, SZ_1M, CFG_FPGA_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + + /* TLB-entry for the FPGA Chip select 3 */ + tlbentry(CFG_FPGA_BASE_1, SZ_1M, CFG_FPGA_BASE_1, 1,AC_R|AC_W|AC_X|SA_I|SA_G) + + /* TLB-entry for the LIME Controller */ + tlbentry(CFG_LIME_BASE_0, SZ_16M, CFG_LIME_BASE_0, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + tlbentry(CFG_LIME_BASE_1, SZ_16M, CFG_LIME_BASE_1, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + tlbentry(CFG_LIME_BASE_2, SZ_16M, CFG_LIME_BASE_2, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + tlbentry(CFG_LIME_BASE_3, SZ_16M, CFG_LIME_BASE_3, 1, AC_R|AC_W|AC_X|SA_I|SA_G) + + /* TLB-entry for Internal Registers & OCM */ + tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I) + + /*TLB-entry PCI registers*/ + tlbentry(0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + + /* TLB-entry for peripherals */ + tlbentry(0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + + tlbtab_end diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c new file mode 100644 index 00000000000..d916284753d --- /dev/null +++ b/board/lwmon5/lwmon5.c @@ -0,0 +1,465 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ppc440.h> +#include <asm/processor.h> +#include <asm/gpio.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +ulong flash_get_size (ulong base, int banknum); + +int board_early_init_f(void) +{ + u32 sdr0_pfc1, sdr0_pfc2; + u32 reg; + + /* PLB Write pipelining disabled. Denali Core workaround */ + mtdcr(plb0_acr, 0xDE000000); + mtdcr(plb1_acr, 0xDE000000); + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr(uic0sr, 0xffffffff); /* clear all. if write with 1 then the status is cleared */ + mtdcr(uic0er, 0x00000000); /* disable all */ + mtdcr(uic0cr, 0x00000000); /* we have not critical interrupts at the moment */ + mtdcr(uic0pr, 0xfffff7ff); /* Adjustment of the polarity */ + mtdcr(uic0tr, 0x00000810); /* per ref-board manual */ + mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(uic0sr, 0xffffffff); /* clear all */ + + mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(uic1er, 0x00000000); /* disable all */ + mtdcr(uic1cr, 0x00000000); /* all non-critical */ + mtdcr(uic1pr, 0xFFFFC7AD); /* Adjustment of the polarity */ + mtdcr(uic1tr, 0x0600384A); /* per ref-board manual */ + mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + + mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(uic2er, 0x00000000); /* disable all */ + mtdcr(uic2cr, 0x00000000); /* all non-critical */ + mtdcr(uic2pr, 0x27C00000); /* Adjustment of the polarity */ + mtdcr(uic2tr, 0xDFC00000); /* per ref-board manual */ + mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(uic2sr, 0xffffffff); /* clear all. Why this??? */ + + /* Trace Pins are disabled. SDR0_PFC0 Register */ + mtsdr(SDR0_PFC0, 0x0); + + /* select Ethernet pins */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + /* SMII via ZMII */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | + SDR0_PFC1_SELECT_CONFIG_6; + mfsdr(SDR0_PFC2, sdr0_pfc2); + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | + SDR0_PFC2_SELECT_CONFIG_6; + + /* enable SPI (SCP) */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL; + + mtsdr(SDR0_PFC2, sdr0_pfc2); + mtsdr(SDR0_PFC1, sdr0_pfc1); + + mtsdr(SDR0_PFC4, 0x80000000); + + /* PCI arbiter disabled */ + /* PCI Host Configuration disbaled */ + mfsdr(sdr_pci0, reg); + reg = 0; + mtsdr(sdr_pci0, 0x00000000 | reg); + + gpio_write_bit(CFG_GPIO_FLASH_WP, 1); + + return 0; +} + +/*---------------------------------------------------------------------------+ + | misc_init_r. + +---------------------------------------------------------------------------*/ +int misc_init_r(void) +{ + u32 pbcr; + int size_val = 0; + u32 reg; + unsigned long usb2d0cr = 0; + unsigned long usb2phy0cr, usb2h0cr = 0; + unsigned long sdr0_pfc1; + + /* + * FLASH stuff... + */ + + /* Re-do sizing to get full correct info */ + + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + + mfebc(pb0cr, pbcr); + switch (gd->bd->bi_flashsize) { + case 1 << 20: + size_val = 0; + break; + case 2 << 20: + size_val = 1; + break; + case 4 << 20: + size_val = 2; + break; + case 8 << 20: + size_val = 3; + break; + case 16 << 20: + size_val = 4; + break; + case 32 << 20: + size_val = 5; + break; + case 64 << 20: + size_val = 6; + break; + case 128 << 20: + size_val = 7; + break; + } + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtebc(pb0cr, pbcr); + + /* + * Re-check to get correct base address + */ + flash_get_size(gd->bd->bi_flashstart, 0); + + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + -CFG_MONITOR_LEN, + 0xffffffff, + &flash_info[0]); + + /* Env protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); + + /* + * USB suff... + */ + /* SDR Setting */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + mfsdr(SDR0_USB0, usb2d0cr); + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mfsdr(SDR0_USB2H0CR, usb2h0cr); + + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + + /* An 8-bit/60MHz interface is the only possible alternative + when connecting the Device to the PHY */ + usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ + + mtsdr(SDR0_PFC1, sdr0_pfc1); + mtsdr(SDR0_USB0, usb2d0cr); + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mtsdr(SDR0_USB2H0CR, usb2h0cr); + + /* + * Clear resets + */ + udelay (1000); + mtsdr(SDR0_SRST1, 0x00000000); + udelay (1000); + mtsdr(SDR0_SRST0, 0x00000000); + + printf("USB: Host(int phy) Device(ext phy)\n"); + + /* + * Clear PLB4A0_ACR[WRP] + * This fix will make the MAL burst disabling patch for the Linux + * EMAC driver obsolete. + */ + reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; + mtdcr(plb4_acr, reg); + + /* + * Reset Lime controller + */ + gpio_write_bit(CFG_GPIO_LIME_S, 1); + udelay(500); + gpio_write_bit(CFG_GPIO_LIME_RST, 1); + + /* Lime memory clock adjusted to 133MHz */ + out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_133MHZ); + /* Wait untill time expired. Because of requirements in lime manual */ + udelay(300); + /* Write lime controller memory parameters */ + out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE); + + /* + * Reset PHY's + */ + gpio_write_bit(CFG_GPIO_PHY0_RST, 0); + gpio_write_bit(CFG_GPIO_PHY1_RST, 0); + udelay(100); + gpio_write_bit(CFG_GPIO_PHY0_RST, 1); + gpio_write_bit(CFG_GPIO_PHY1_RST, 1); + + return 0; +} + +int checkboard(void) +{ + char *s = getenv("serial#"); + + printf("Board: lwmon5"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} + +#if defined(CFG_DRAM_TEST) +int testdram(void) +{ + unsigned long *mem = (unsigned long *)0; + const unsigned long kend = (1024 / sizeof(unsigned long)); + unsigned long k, n; + + mtmsr(0); + + for (k = 0; k < CFG_MBYTES_SDRAM; + ++k, mem += (1024 / sizeof(unsigned long))) { + if ((k & 1023) == 0) { + printf("%3d MB\r", k / 1024); + } + + memset(mem, 0xaaaaaaaa, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0xaaaaaaaa) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + + memset(mem, 0x55555555, 1024); + for (n = 0; n < kend; ++n) { + if (mem[n] != 0x55555555) { + printf("SDRAM test fails at: %08x\n", + (uint) & mem[n]); + return 1; + } + } + } + printf("SDRAM test passes\n"); + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int pci_pre_init(struct pci_controller *hose) +{ + unsigned long addr; + + /*-------------------------------------------------------------------------+ + | Set priority for all PLB3 devices to 0. + | Set PLB3 arbiter to fair mode. + +-------------------------------------------------------------------------*/ + mfsdr(sdr_amp1, addr); + mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb3_acr); + mtdcr(plb3_acr, addr | 0x80000000); + + /*-------------------------------------------------------------------------+ + | Set priority for all PLB4 devices to 0. + +-------------------------------------------------------------------------*/ + mfsdr(sdr_amp0, addr); + mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ + mtdcr(plb4_acr, addr); + + /*-------------------------------------------------------------------------+ + | Set Nebula PLB4 arbiter to fair mode. + +-------------------------------------------------------------------------*/ + /* Segment0 */ + addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; + addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; + addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; + addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; + mtdcr(plb0_acr, addr); + + /* Segment1 */ + addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; + addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; + addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; + addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; + mtdcr(plb1_acr, addr); + + return 1; +} +#endif /* defined(CONFIG_PCI) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller *hose) +{ + /*--------------------------------------------------------------------------+ + * Set up Direct MMIO registers + *--------------------------------------------------------------------------*/ + /*--------------------------------------------------------------------------+ + | PowerPC440EPX PCI Master configuration. + | Map one 1Gig range of PLB/processor addresses to PCI memory space. + | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF + | Use byte reversed out routines to handle endianess. + | Make this region non-prefetchable. + +--------------------------------------------------------------------------*/ + out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + + /*--------------------------------------------------------------------------+ + * Set up Configuration registers + *--------------------------------------------------------------------------*/ + + /* Program the board's subsystem id/vendor id */ + pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, + CFG_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); + + /* Configure command register as bus master */ + pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); + + /* 240nS PCI clock */ + pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + + /* No error reporting */ + pci_write_config_word(0, PCI_ERREN, 0); + + pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); + +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * pci_master_init + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +void pci_master_init(struct pci_controller *hose) +{ + unsigned short temp_short; + + /*--------------------------------------------------------------------------+ + | Write the PowerPC440 EP PCI Configuration regs. + | Enable PowerPC440 EP to be a master on the PCI bus (PMM). + | Enable PowerPC440 EP to act as a PCI memory target (PTM). + +--------------------------------------------------------------------------*/ + pci_read_config_word(0, PCI_COMMAND, &temp_short); + pci_write_config_word(0, PCI_COMMAND, + temp_short | PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* Cactus is always configured as host. */ + return (1); +} +#endif /* defined(CONFIG_PCI) */ + +void hw_watchdog_reset(void) +{ + int val; + + /* + * Toggle watchdog output + */ + val = gpio_read_out_bit(CFG_GPIO_WATCHDOG) == 0 ? 1 : 0; + gpio_write_bit(CFG_GPIO_WATCHDOG, val); +} diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c new file mode 100644 index 00000000000..9a4a8eea8fb --- /dev/null +++ b/board/lwmon5/sdram.c @@ -0,0 +1,662 @@ +/* + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/io.h> +#include <ppc440.h> + +#include "sdram.h" + +/* + * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory + * region. Right now the cache should still be disabled in U-Boot because of the + * EMAC driver, that need it's buffer descriptor to be located in non cached + * memory. + * + * If at some time this restriction doesn't apply anymore, just define + * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup + * everything correctly. + */ +#ifdef CFG_ENABLE_SDRAM_CACHE +#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */ +#else +#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ +#endif + +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); +void dcbz_area(u32 start_address, u32 num_bytes); +void dflush(void); + +#ifdef CONFIG_ADD_RAM_INFO +static u32 is_ecc_enabled(void) +{ + u32 val; + + mfsdram(DDR0_22, val); + val &= DDR0_22_CTRL_RAW_MASK; + if (val) + return 1; + else + return 0; +} + +void board_add_ram_info(int use_default) +{ + PPC440_SYS_INFO board_cfg; + u32 val; + + if (is_ecc_enabled()) + puts(" (ECC"); + else + puts(" (ECC not"); + + get_sys_info(&board_cfg); + printf(" enabled, %d MHz", (board_cfg.freqPLB * 2) / 1000000); + + mfsdram(DDR0_03, val); + val = DDR0_03_CASLAT_DECODE(val); + printf(", CL%d)", val); +} +#endif + +static int wait_for_dlllock(void) +{ + u32 val; + int wait = 0; + + /* + * Wait for the DCC master delay line to finish calibration + */ + mtdcr(ddrcfga, DDR0_17); + val = DDR0_17_DLLLOCKREG_UNLOCKED; + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED) + /* dlllockreg bit on */ + return 0; + else + wait++; + } + debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val); + debug("Waiting for dlllockreg bit to raise\n"); + + return -1; +} + +#if defined(CONFIG_DDR_DATA_EYE) +int wait_for_dram_init_complete(void) +{ + u32 val; + int wait = 0; + + /* + * Wait for 'DRAM initialization complete' bit in status register + */ + mtdcr(ddrcfga, DDR0_00); + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6) + /* 'DRAM initialization complete' bit */ + return 0; + else + wait++; + } + + debug("DRAM initialization complete bit in status register did not rise\n"); + + return -1; +} + +#define NUM_TRIES 64 +#define NUM_READS 10 + +void denali_core_search_data_eye(u32 start_addr, u32 memory_size) +{ + int k, j; + u32 val; + u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X; + u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0; + u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0; + u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0; + volatile u32 *ram_pointer; + u32 test[NUM_TRIES] = { + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; + + ram_pointer = (volatile u32 *)start_addr; + + for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) { + /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/ + + /* + * De-assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* + * Set 'wr_dqs_shift' + */ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + + /* + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + */ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + + passing_cases = 0; + + for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) { + /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/ + /* + * Set 'dll_dqs_delay_X'. + */ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* + * Assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* + * Wait for the DCC master delay line to finish calibration + */ + if (wait_for_dlllock() != 0) { + printf("dlllock did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n", + wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + ppcMsync(); + ppcMbar(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n", + wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ + + /* write values */ + for (j=0; j<NUM_TRIES; j++) { + ram_pointer[j] = test[j]; + + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + } + + /* read values back */ + for (j=0; j<NUM_TRIES; j++) { + for (k=0; k<NUM_READS; k++) { + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + + if (ram_pointer[j] != test[j]) + break; + } + + /* read error */ + if (k != NUM_READS) + break; + } + + /* See if the dll_dqs_delay_X value passed.*/ + if (j < NUM_TRIES) { + /* Failed */ + passing_cases = 0; + /* break; */ + } else { + /* Passed */ + if (passing_cases == 0) + dll_dqs_delay_X_sw_val = dll_dqs_delay_X; + passing_cases++; + if (passing_cases >= max_passing_cases) { + max_passing_cases = passing_cases; + wr_dqs_shift_with_max_passing_cases = wr_dqs_shift; + dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val; + dll_dqs_delay_X_end_window = dll_dqs_delay_X; + } + } + + /* + * De-assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */ + + } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */ + + /* + * Largest passing window is now detected. + */ + + /* Compute dll_dqs_delay_X value */ + dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2; + wr_dqs_shift = wr_dqs_shift_with_max_passing_cases; + + debug("DQS calibration - Window detected:\n"); + debug("max_passing_cases = %d\n", max_passing_cases); + debug("wr_dqs_shift = %d\n", wr_dqs_shift); + debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X); + debug("dll_dqs_delay_X window = %d - %d\n", + dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window); + + /* + * De-assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* + * Set 'wr_dqs_shift' + */ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_09=0x%08lx\n", val); + + /* + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + */ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_22=0x%08lx\n", val); + + /* + * Set 'dll_dqs_delay_X'. + */ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_17=0x%08lx\n", val); + + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_18=0x%08lx\n", val); + + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_19=0x%08lx\n", val); + + /* + * Assert 'start' parameter. + */ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* + * Wait for the DCC master delay line to finish calibration + */ + if (wait_for_dlllock() != 0) { + printf("dlllock did not occur !!!\n"); + hang(); + } + ppcMsync(); + ppcMbar(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ +} +#endif /* CONFIG_DDR_DATA_EYE */ + +#ifdef CONFIG_DDR_ECC +static void wait_ddr_idle(void) +{ + /* + * Controller idle status cannot be determined for Denali + * DDR2 code. Just return here. + */ +} + +static void blank_string(int size) +{ + int i; + + for (i=0; i<size; i++) + putc('\b'); + for (i=0; i<size; i++) + putc(' '); + for (i=0; i<size; i++) + putc('\b'); +} + +static void program_ecc(u32 start_address, + u32 num_bytes, + u32 tlb_word2_i_value) +{ + u32 current_address; + u32 end_address; + u32 address_increment; + u32 val; + char str[] = "ECC generation -"; + char slash[] = "\\|/-\\|/-"; + int loop = 0; + int loopi = 0; + + current_address = start_address; + + sync(); + eieio(); + wait_ddr_idle(); + + if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) { + /* ECC bit set method for non-cached memory */ + address_increment = 4; + end_address = current_address + num_bytes; + + puts(str); + + while (current_address < end_address) { + *((u32 *)current_address) = 0x00000000; + current_address += address_increment; + + if ((loop++ % (2 << 20)) == 0) { + putc('\b'); + putc(slash[loopi++ % 8]); + } + } + + blank_string(strlen(str)); + } else { + /* ECC bit set method for cached memory */ +#if 1 /* test-only: will remove this define later, when ECC problems are solved! */ + /* + * Some boards (like lwmon5) need to preserve the memory + * content upon ECC generation (for the log-buffer). + * Therefore we don't fill the memory with a pattern or + * just zero it, but write the same values back that are + * already in the memory cells. + */ + address_increment = CFG_CACHELINE_SIZE; + end_address = current_address + num_bytes; + + current_address = start_address; + while (current_address < end_address) { + ppcDcbi(current_address); + ppcDcbf(current_address); + current_address += CFG_CACHELINE_SIZE; + } +#else + dcbz_area(start_address, num_bytes); + dflush(); +#endif + } + + sync(); + eieio(); + wait_ddr_idle(); + + /* Clear error status */ + mfsdram(DDR0_00, val); + mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); + + /* Set 'int_mask' parameter to functionnal value */ + mfsdram(DDR0_01, val); + mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF)); + + sync(); + eieio(); + wait_ddr_idle(); +} +#endif + +static __inline__ u32 get_mcsr(void) +{ + u32 val; + + asm volatile("mfspr %0, 0x23c" : "=r" (val) :); + return val; +} + +static __inline__ void set_mcsr(u32 val) +{ + asm volatile("mtspr 0x23c, %0" : "=r" (val) :); +} + +/************************************************************************* + * + * initdram -- 440EPx's DDR controller is a DENALI Core + * + ************************************************************************/ +long int initdram (int board_type) +{ + u32 val; + +#if 0 /* test-only: will remove this define later, when ECC problems are solved! */ + /* CL=3 */ + mtsdram(DDR0_02, 0x00000000); + + mtsdram(DDR0_00, 0x0000190A); + mtsdram(DDR0_01, 0x01000000); + mtsdram(DDR0_03, 0x02030603); /* A suitable burst length was taken. CAS is right for our board */ + + mtsdram(DDR0_04, 0x0A030300); + mtsdram(DDR0_05, 0x02020308); + mtsdram(DDR0_06, 0x0103C812); + mtsdram(DDR0_07, 0x00090100); + mtsdram(DDR0_08, 0x02c80001); + mtsdram(DDR0_09, 0x00011D5F); + mtsdram(DDR0_10, 0x00000300); + mtsdram(DDR0_11, 0x000CC800); + mtsdram(DDR0_12, 0x00000003); + mtsdram(DDR0_14, 0x00000000); + mtsdram(DDR0_17, 0x1e000000); + mtsdram(DDR0_18, 0x1e1e1e1e); + mtsdram(DDR0_19, 0x1e1e1e1e); + mtsdram(DDR0_20, 0x0B0B0B0B); + mtsdram(DDR0_21, 0x0B0B0B0B); +#ifdef CONFIG_DDR_ECC + mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */ +#else + mtsdram(DDR0_22, 0x00267F0B); +#endif + + mtsdram(DDR0_23, 0x01000000); + mtsdram(DDR0_24, 0x01010001); + + mtsdram(DDR0_26, 0x2D93028A); + mtsdram(DDR0_27, 0x0784682B); + + mtsdram(DDR0_28, 0x00000080); + mtsdram(DDR0_31, 0x00000000); + mtsdram(DDR0_42, 0x01000006); + + mtsdram(DDR0_43, 0x030A0200); + mtsdram(DDR0_44, 0x00000003); + mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */ +#else + /* CL=4 */ + mtsdram(DDR0_02, 0x00000000); + + mtsdram(DDR0_00, 0x0000190A); + mtsdram(DDR0_01, 0x01000000); + mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */ + + mtsdram(DDR0_04, 0x0B030300); + mtsdram(DDR0_05, 0x02020308); + mtsdram(DDR0_06, 0x0003C812); + mtsdram(DDR0_07, 0x00090100); + mtsdram(DDR0_08, 0x03c80001); + mtsdram(DDR0_09, 0x00011D5F); + mtsdram(DDR0_10, 0x00000300); + mtsdram(DDR0_11, 0x000CC800); + mtsdram(DDR0_12, 0x00000003); + mtsdram(DDR0_14, 0x00000000); + mtsdram(DDR0_17, 0x1e000000); + mtsdram(DDR0_18, 0x1e1e1e1e); + mtsdram(DDR0_19, 0x1e1e1e1e); + mtsdram(DDR0_20, 0x0B0B0B0B); + mtsdram(DDR0_21, 0x0B0B0B0B); +#ifdef CONFIG_DDR_ECC + mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */ +#else + mtsdram(DDR0_22, 0x00267F0B); +#endif + + mtsdram(DDR0_23, 0x01000000); + mtsdram(DDR0_24, 0x01010001); + + mtsdram(DDR0_26, 0x2D93028A); + mtsdram(DDR0_27, 0x0784682B); + + mtsdram(DDR0_28, 0x00000080); + mtsdram(DDR0_31, 0x00000000); + mtsdram(DDR0_42, 0x01000008); + + mtsdram(DDR0_43, 0x050A0200); + mtsdram(DDR0_44, 0x00000005); + mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */ +#endif + + wait_for_dlllock(); + + /* + * Program tlb entries for this size (dynamic) + */ + program_tlb(0, 0, CFG_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE); + + /* + * Setup 2nd TLB with same physical address but different virtual address + * with cache enabled. This is done for fast ECC generation. + */ + program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0); + +#ifdef CONFIG_DDR_DATA_EYE + /* + * Perform data eye search if requested. + */ + denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20); + + /* + * Clear possible errors resulting from data-eye-search. + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + val = get_mcsr(); + set_mcsr(val); +#endif + +#ifdef CONFIG_DDR_ECC + /* + * If ECC is enabled, initialize the parity bits. + */ + program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0); +#endif + + return (CFG_MBYTES_SDRAM << 20); +} diff --git a/board/lwmon5/sdram.h b/board/lwmon5/sdram.h new file mode 100644 index 00000000000..7f847aa2ad9 --- /dev/null +++ b/board/lwmon5/sdram.h @@ -0,0 +1,505 @@ +/* + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SPD_SDRAM_DENALI_H_ +#define _SPD_SDRAM_DENALI_H_ + +#define ppcMsync sync +#define ppcMbar eieio + +/* General definitions */ +#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */ +#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */ +#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */ +#define SDRAM_NONE 0 /* No DIMM detected in Slot */ +#define MAXRANKS 2 /* 2 ranks maximum */ + +/* Supported PLB Frequencies */ +#define PLB_FREQ_133MHZ 133333333 +#define PLB_FREQ_152MHZ 152000000 +#define PLB_FREQ_160MHZ 160000000 +#define PLB_FREQ_166MHZ 166666666 + +/* Denali Core Registers */ +#define SDRAM_DCR_BASE 0x10 + +#define DDR_DCR_BASE 0x10 +#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */ +#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */ + +/*-----------------------------------------------------------------------------+ + | Values for ddrcfga register - indirect addressing of these regs + +-----------------------------------------------------------------------------*/ + +#define DDR0_00 0x00 +#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */ +#define DDR0_00_INT_ACK_ALL 0x7F000000 +#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +/* Status */ +#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */ +/* Bit0. A single access outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT0 0x00010000 +/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT1 0x00020000 +/* Bit2. Single correctable ECC event detected */ +#define DDR0_00_INT_STATUS_BIT2 0x00040000 +/* Bit3. Multiple correctable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT3 0x00080000 +/* Bit4. Single uncorrectable ECC event detected. */ +#define DDR0_00_INT_STATUS_BIT4 0x00100000 +/* Bit5. Multiple uncorrectable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT5 0x00200000 +/* Bit6. DRAM initialization complete. */ +#define DDR0_00_INT_STATUS_BIT6 0x00400000 +/* Bit7. Logical OR of all lower bits. */ +#define DDR0_00_INT_STATUS_BIT7 0x00800000 + +#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00 +#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_00_DLL_START_POINT_MASK 0x0000007F +#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + + +#define DDR0_01 0x01 +#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000 +#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000 +#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */ +#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_01_INT_MASK_MASK 0x000000FF +#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) +#define DDR0_01_INT_MASK_ALL_ON 0x000000FF +#define DDR0_01_INT_MASK_ALL_OFF 0x00000000 + +#define DDR0_02 0x02 +#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */ +#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24) +#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2) +#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */ +#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */ +#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_02_START_MASK 0x00000001 +#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1) +#define DDR0_02_START_OFF 0x00000000 +#define DDR0_02_START_ON 0x00000001 + +#define DDR0_03 0x03 +#define DDR0_03_BSTLEN_MASK 0x07000000 +#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_03_CASLAT_MASK 0x00070000 +#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_03_CASLAT_LIN_MASK 0x00000F00 +#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_03_INITAREF_MASK 0x0000000F +#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_04 0x04 +#define DDR0_04_TRC_MASK 0x1F000000 +#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_04_TRRD_MASK 0x00070000 +#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_04_TRTP_MASK 0x00000700 +#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7) + +#define DDR0_05 0x05 +#define DDR0_05_TMRD_MASK 0x1F000000 +#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_05_TEMRS_MASK 0x00070000 +#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_05_TRP_MASK 0x00000F00 +#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_05_TRAS_MIN_MASK 0x000000FF +#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#define DDR0_06 0x06 +#define DDR0_06_WRITEINTERP_MASK 0x01000000 +#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_06_TWTR_MASK 0x00070000 +#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_06_TDLL_MASK 0x0000FF00 +#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_06_TRFC_MASK 0x0000007F +#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_07 0x07 +#define DDR0_07_NO_CMD_INIT_MASK 0x01000000 +#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_07_TFAW_MASK 0x001F0000 +#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100 +#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_07_AREFRESH_MASK 0x00000001 +#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_08 0x08 +#define DDR0_08_WRLAT_MASK 0x07000000 +#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_08_TCPD_MASK 0x00FF0000 +#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_08_DQS_N_EN_MASK 0x00000100 +#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001 +#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_09 0x09 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_09_RTT_0_MASK 0x00030000 +#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00 +#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F +#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_10 0x0A +#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */ +#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_10_CS_MAP_MASK 0x00000300 +#define DDR0_10_CS_MAP_NO_MEM 0x00000000 +#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100 +#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200 +#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F +#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F) + +#define DDR0_11 0x0B +#define DDR0_11_SREFRESH_MASK 0x01000000 +#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_11_TXSNR_MASK 0x00FF0000 +#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_11_TXSR_MASK 0x0000FF00 +#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) + +#define DDR0_12 0x0C +#define DDR0_12_TCKE_MASK 0x0000007 +#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) +#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7) + +#define DDR0_13 0x0D + +#define DDR0_14 0x0E +#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000 +#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_14_REDUC_MASK 0x00010000 +#define DDR0_14_REDUC_64BITS 0x00000000 +#define DDR0_14_REDUC_32BITS 0x00010000 +#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100 +#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) + +#define DDR0_15 0x0F + +#define DDR0_16 0x10 + +#define DDR0_17 0x11 +#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000 +#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */ +#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000 +#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000 +#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */ +#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) + +#define DDR0_18 0x12 +#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000 +#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000 +#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00 +#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F +#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_19 0x13 +#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000 +#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000 +#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00 +#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F +#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_20 0x14 +#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000 +#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000 +#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00 +#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F +#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_21 0x15 +#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000 +#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000 +#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00 +#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F +#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_22 0x16 +/* ECC */ +#define DDR0_22_CTRL_RAW_MASK 0x03000000 +#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */ +#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/ +#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */ +#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */ +#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3) + +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000 +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00 +#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F +#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + + +#define DDR0_23 0x17 +#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000 +#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */ +#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */ +#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_23_FWC_MASK 0x00000001 /* Write only */ +#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_24 0x18 +#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000 +#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000 +#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300 +#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003 +#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0) +#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3) + +#define DDR0_25 0x19 +#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */ +#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */ +#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_26 0x1A +#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000 +#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_26_TREF_MASK 0x00003FFF +#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_27 0x1B +#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000 +#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_27_TINIT_MASK 0x0000FFFF +#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_28 0x1C +#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000 +#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF +#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0) +#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF) + +#define DDR0_29 0x1D + +#define DDR0_30 0x1E + +#define DDR0_31 0x1F +#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF +#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_32 0x20 +#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_33 0x21 +#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_34 0x22 +#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_35 0x23 +#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_36 0x24 +#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_37 0x25 +#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_38 0x26 +#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_39 0x27 +#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_40 0x28 +#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_41 0x29 +#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_42 0x2A +#define DDR0_42_ADDR_PINS_MASK 0x07000000 +#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F +#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_43 0x2B +#define DDR0_43_TWR_MASK 0x07000000 +#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_43_APREBIT_MASK 0x000F0000 +#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_43_COLUMN_SIZE_MASK 0x00000700 +#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000 +#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_44 0x2C +#define DDR0_44_TRCD_MASK 0x000000FF +#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#endif /* _SPD_SDRAM_DENALI_H_ */ diff --git a/board/lwmon5/u-boot.lds b/board/lwmon5/u-boot.lds new file mode 100644 index 00000000000..a423f982858 --- /dev/null +++ b/board/lwmon5/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/pcs440ep/config.mk b/board/pcs440ep/config.mk index 319c4fa214a..4d942ebc71b 100644 --- a/board/pcs440ep/config.mk +++ b/board/pcs440ep/config.mk @@ -25,6 +25,9 @@ # PCS440EP board # +# Check the U-Boot Image with a SHA1 checksum +ALL += $(obj)u-boot.sha1 + #TEXT_BASE = 0x00001000 ifeq ($(ramsym),1) diff --git a/board/pcs440ep/flash.c b/board/pcs440ep/flash.c index ece54781b9d..70014407c6e 100644 --- a/board/pcs440ep/flash.c +++ b/board/pcs440ep/flash.c @@ -83,6 +83,7 @@ void flash_print_info(flash_info_t *info) case FLASH_MAN_FUJ: printf ("FUJITSU "); break; case FLASH_MAN_SST: printf ("SST "); break; case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; + case FLASH_MAN_MX: printf ("MXIC "); break; default: printf ("Unknown Vendor "); break; } @@ -195,6 +196,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: info->flash_id = FLASH_MAN_EXCEL; break; + case (CFG_FLASH_WORD_SIZE)MX_MANUFACT: + info->flash_id = FLASH_MAN_MX; + break; default: info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; diff --git a/board/pcs440ep/init.S b/board/pcs440ep/init.S index 0eee4d8099e..36a40c97a3d 100644 --- a/board/pcs440ep/init.S +++ b/board/pcs440ep/init.S @@ -87,27 +87,32 @@ .globl tlbtab tlbtab: - tlbtab_start + tlbtab_start - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ + tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) + /* + * TLB entries for SDRAM are not needed on this platform. + * They are dynamically generated in the SPD DDR detection + * routine. + */ - /* PCI */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) - /* USB 2.0 Device */ - tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I ) + /* PCI */ + tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) - tlbtab_end + /* USB 2.0 Device */ + tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I ) + + tlbtab_end diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 8858f0a5e54..ada6b82c927 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -23,20 +23,112 @@ #include <common.h> #include <ppc4xx.h> +#include <malloc.h> +#include <command.h> +#include <crc.h> #include <asm/processor.h> #include <spd_sdram.h> +#include <status_led.h> +#include <sha1.h> DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ -static void set_leds(int val) +unsigned char sha1_checksum[SHA1_SUM_LEN]; + +/* swap 4 Bits (Bit0 = Bit3, Bit1 = Bit2, Bit2 = Bit1 and Bit3 = Bit0) */ +unsigned char swapbits[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe, + 0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf}; + +static void set_leds (int val) +{ + out32(GPIO0_OR, (in32 (GPIO0_OR) & ~0x78000000) | (val << 27)); +} + +#define GET_LEDS ((in32 (GPIO0_OR) & 0x78000000) >> 27) + +void __led_init (led_id_t mask, int state) +{ + int val = GET_LEDS; + + if (state == STATUS_LED_ON) + val |= mask; + else + val &= ~mask; + set_leds (val); +} + +void __led_set (led_id_t mask, int state) +{ + int val = GET_LEDS; + + if (state == STATUS_LED_ON) + val |= mask; + else if (state == STATUS_LED_OFF) + val &= ~mask; + set_leds (val); +} + +void __led_toggle (led_id_t mask) { - unsigned char led[16] = {0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe, - 0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf}; - out32(GPIO0_OR, (in32(GPIO0_OR) & ~0x78000000) | (led[val] << 27)); + int val = GET_LEDS; + + val ^= mask; + set_leds (val); } +static void status_led_blink (void) +{ + int i; + int val = GET_LEDS; + + /* set all LED which are on, to state BLINKING */ + for (i = 0; i < 4; i++) { + if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING); + val = val << 1; + } +} + +#if defined(CONFIG_SHOW_BOOT_PROGRESS) +void show_boot_progress (int val) +{ + /* find all valid Codes for val in README */ + if (val == -30) return; + if (val < 0) { + /* smthing goes wrong */ + status_led_blink (); + return; + } + switch (val) { + case 1: + /* validating Image */ + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_ON); + status_led_set (2, STATUS_LED_ON); + break; + case 15: + /* booting */ + status_led_set (0, STATUS_LED_ON); + status_led_set (1, STATUS_LED_ON); + status_led_set (2, STATUS_LED_ON); + break; + case 64: + /* starting Ethernet configuration */ + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_OFF); + status_led_set (2, STATUS_LED_ON); + break; + case 80: + /* loading Image */ + status_led_set (0, STATUS_LED_ON); + status_led_set (1, STATUS_LED_OFF); + status_led_set (2, STATUS_LED_ON); + break; + } +} +#endif + int board_early_init_f(void) { register uint reg; @@ -85,6 +177,251 @@ int board_early_init_f(void) return 0; } +#define EEPROM_LEN 256 +void load_sernum_ethaddr (void) +{ + int ret; + char buf[EEPROM_LEN]; + char mac[32]; + char *use_eeprom; + u16 checksumcrc16 = 0; + + /* read the MACs from EEprom */ + status_led_set (0, STATUS_LED_ON); + status_led_set (1, STATUS_LED_ON); + ret = eeprom_read (CFG_I2C_EEPROM_ADDR, 0, (uchar *)buf, EEPROM_LEN); + if (ret == 0) { + checksumcrc16 = cyg_crc16 ((uchar *)buf, EEPROM_LEN - 2); + /* check, if the EEprom is programmed: + * - The Prefix(Byte 0,1,2) is equal to "ATR" + * - The checksum, stored in the last 2 Bytes, is correct + */ + if ((strncmp (buf,"ATR",3) != 0) || + ((checksumcrc16 >> 8) != buf[EEPROM_LEN - 2]) || + ((checksumcrc16 & 0xff) != buf[EEPROM_LEN - 1])) { + /* EEprom is not programmed */ + printf("%s: EEPROM Checksum not OK\n", __FUNCTION__); + } else { + /* get the MACs */ + sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x", + buf[3], + buf[4], + buf[5], + buf[6], + buf[7], + buf[8]); + setenv ("ethaddr", (char *) mac); + sprintf (mac, "%02x:%02x:%02x:%02x:%02x:%02x", + buf[9], + buf[10], + buf[11], + buf[12], + buf[13], + buf[14]); + setenv ("eth1addr", (char *) mac); + return; + } + } + + /* some error reading the EEprom */ + if ((use_eeprom = getenv ("use_eeprom_ethaddr")) == NULL) { + /* dont use bootcmd */ + setenv("bootdelay", "-1"); + return; + } + /* == default ? use standard */ + if (strncmp (use_eeprom, "default", 7) == 0) { + return; + } + /* Env doesnt exist -> hang */ + status_led_blink (); + hang (); + return; +} + +#ifdef CONFIG_PREBOOT + +static uchar kbd_magic_prefix[] = "key_magic"; +static uchar kbd_command_prefix[] = "key_cmd"; + +struct kbd_data_t { + char s1; + char s2; +}; + +struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data) +{ + char *val; + unsigned long tmp; + + /* use the DIPs for some bootoptions */ + val = getenv (ENV_NAME_DIP); + tmp = simple_strtoul (val, NULL, 16); + + kbd_data->s2 = (tmp & 0x0f); + kbd_data->s1 = (tmp & 0xf0) >> 4; + return kbd_data; +} + +static int compare_magic (const struct kbd_data_t *kbd_data, char *str) +{ + char s1 = str[0]; + + if (s1 >= '0' && s1 <= '9') + s1 -= '0'; + else if (s1 >= 'a' && s1 <= 'f') + s1 = s1 - 'a' + 10; + else if (s1 >= 'A' && s1 <= 'F') + s1 = s1 - 'A' + 10; + else + return -1; + + if (s1 != kbd_data->s1) return -1; + + s1 = str[1]; + if (s1 >= '0' && s1 <= '9') + s1 -= '0'; + else if (s1 >= 'a' && s1 <= 'f') + s1 = s1 - 'a' + 10; + else if (s1 >= 'A' && s1 <= 'F') + s1 = s1 - 'A' + 10; + else + return -1; + + if (s1 != kbd_data->s2) return -1; + return 0; +} + +static char *key_match (const struct kbd_data_t *kbd_data) +{ + char magic[sizeof (kbd_magic_prefix) + 1]; + char *suffix; + char *kbd_magic_keys; + + /* + * The following string defines the characters that can be appended + * to "key_magic" to form the names of environment variables that + * hold "magic" key codes, i. e. such key codes that can cause + * pre-boot actions. If the string is empty (""), then only + * "key_magic" is checked (old behaviour); the string "125" causes + * checks for "key_magic1", "key_magic2" and "key_magic5", etc. + */ + if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) + kbd_magic_keys = ""; + + /* loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix = kbd_magic_keys; *suffix || + suffix == kbd_magic_keys; ++suffix) { + sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); + if (compare_magic (kbd_data, getenv (magic)) == 0) { + char cmd_name[sizeof (kbd_command_prefix) + 1]; + char *cmd; + + sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); + cmd = getenv (cmd_name); + + return (cmd); + } + } + return (NULL); +} + +#endif /* CONFIG_PREBOOT */ + +static int pcs440ep_readinputs (void) +{ + int i; + char value[20]; + + /* read the inputs and set the Envvars */ + /* Revision Level Bit 26 - 29 */ + i = ((in32 (GPIO0_IR) & 0x0000003c) >> 2); + i = swapbits[i]; + sprintf (value, "%02x", i); + setenv (ENV_NAME_REVLEV, value); + /* Solder Switch Bit 30 - 33 */ + i = (in32 (GPIO0_IR) & 0x00000003) << 2; + i += (in32 (GPIO1_IR) & 0xc0000000) >> 30; + i = swapbits[i]; + sprintf (value, "%02x", i); + setenv (ENV_NAME_SOLDER, value); + /* DIP Switch Bit 49 - 56 */ + i = ((in32 (GPIO1_IR) & 0x00007f80) >> 7); + i = (swapbits[i & 0x0f] << 4) + swapbits[(i & 0xf0) >> 4]; + sprintf (value, "%02x", i); + setenv (ENV_NAME_DIP, value); + return 0; +} + + +#if defined(CONFIG_SHA1_CHECK_UB_IMG) +/************************************************************************* + * calculate a SHA1 sum for the U-Boot image in Flash. + * + ************************************************************************/ +static int pcs440ep_sha1 (int docheck) +{ + unsigned char *data; + unsigned char *ptroff; + unsigned char output[20]; + unsigned char org[20]; + int i, len = CONFIG_SHA1_LEN; + + memcpy ((char *)CFG_LOAD_ADDR, (char *)CONFIG_SHA1_START, len); + data = (unsigned char *)CFG_LOAD_ADDR; + ptroff = &data[len + SHA1_SUM_POS]; + + for (i = 0; i < SHA1_SUM_LEN; i++) { + org[i] = ptroff[i]; + ptroff[i] = 0; + } + + sha1_csum ((unsigned char *) data, len, (unsigned char *)output); + + if (docheck == 2) { + for (i = 0; i < 20 ; i++) { + printf("%02X ", output[i]); + } + printf("\n"); + } + if (docheck == 1) { + for (i = 0; i < 20 ; i++) { + if (org[i] != output[i]) return 1; + } + } + return 0; +} + +/************************************************************************* + * do some checks after the SHA1 checksum from the U-Boot Image was + * calculated. + * + ************************************************************************/ +static void pcs440ep_checksha1 (void) +{ + int ret; + char *cs_test; + + ret = pcs440ep_sha1 (1); + if (ret == 0) return; + + if ((cs_test = getenv ("cs_test")) == NULL) { + /* Env doesnt exist -> hang */ + status_led_blink (); + hang (); + } + + if (strncmp (cs_test, "off", 3) == 0) { + printf ("SHA1 U-Boot sum NOT ok!\n"); + setenv ("bootdelay", "-1"); + } +} +#else +static __inline__ void pcs440ep_checksha1 (void) { do {} while (0);} +#endif + int misc_init_r (void) { uint pbcr; @@ -139,6 +476,18 @@ int misc_init_r (void) CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, &flash_info[1]); + pcs440ep_readinputs (); + pcs440ep_checksha1 (); +#ifdef CONFIG_PREBOOT + { + struct kbd_data_t kbd_data; + /* Decode keys */ + char *str = strdup (key_match (get_keys (&kbd_data))); + /* Set or delete definition */ + setenv ("preboot", str); + free (str); + } +#endif /* CONFIG_PREBOOT */ return 0; } @@ -156,13 +505,31 @@ int checkboard(void) return (0); } +void spd_ddr_init_hang (void) +{ + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_ON); + /* we cannot use hang() because we are still running from + Flash, and so the status_led driver is not initialized */ + puts ("### ERROR ### Please RESET the board ###\n"); + for (;;) { + __led_toggle (4); + udelay (100000); + } +} + long int initdram (int board_type) { long dram_size = 0; - set_leds(1); /* display boot info counter */ + status_led_set (0, STATUS_LED_ON); + status_led_set (1, STATUS_LED_OFF); dram_size = spd_sdram(); - set_leds(2); /* display boot info counter */ + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_ON); + if (dram_size == 0) { + hang(); + } return dram_size; } @@ -217,7 +584,7 @@ int testdram(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -258,7 +625,7 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init @@ -377,3 +744,119 @@ void hw_watchdog_reset(void) } #endif + +/************************************************************************* + * "led" Commando for the U-Boot shell + * + ************************************************************************/ +int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rcode = 0; + ulong pattern = 0; + + pattern = simple_strtoul (argv[1], NULL, 10); + if (pattern > 200) { + status_led_blink (); + hang (); + return rcode; + } + if (pattern > 100) { + status_led_blink (); + return rcode; + } + pattern &= 0x0f; + set_leds (pattern); + return rcode; +} + +U_BOOT_CMD( + led, 2, 1, do_led, + "led - set the led\n", + NULL +); + +#if defined(CONFIG_SHA1_CHECK_UB_IMG) +/************************************************************************* + * "sha1" Commando for the U-Boot shell + * + ************************************************************************/ +int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rcode = -1; + + if (argc < 2) { + usage: + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (argc >= 3) { + unsigned char *data; + unsigned char output[20]; + int len; + int i; + + data = (unsigned char *)simple_strtoul (argv[1], NULL, 16); + len = simple_strtoul (argv[2], NULL, 16); + sha1_csum (data, len, (unsigned char *)output); + printf ("U-Boot sum:\n"); + for (i = 0; i < 20 ; i++) { + printf ("%02X ", output[i]); + } + printf ("\n"); + if (argc == 4) { + data = (unsigned char *)simple_strtoul (argv[3], NULL, 16); + memcpy (data, output, 20); + } + return 0; + } + if (argc == 2) { + char *ptr = argv[1]; + if (*ptr != '-') goto usage; + ptr++; + if ((*ptr == 'c') || (*ptr == 'C')) { + rcode = pcs440ep_sha1 (1); + printf ("SHA1 U-Boot sum %sok!\n", (rcode != 0) ? "not " : ""); + } else if ((*ptr == 'p') || (*ptr == 'P')) { + rcode = pcs440ep_sha1 (2); + } else { + rcode = pcs440ep_sha1 (0); + } + return rcode; + } + return rcode; +} + +U_BOOT_CMD( + sha1, 4, 1, do_sha1, + "sha1 - calculate the SHA1 Sum\n", + "address len [addr] calculate the SHA1 sum [save at addr]\n" + " -p calculate the SHA1 sum from the U-Boot image in flash and print\n" + " -c check the U-Boot image in flash\n" +); +#endif + +#ifdef CONFIG_IDE_PREINIT +int ide_preinit (void) +{ + /* Set True IDE Mode */ + out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00100000)); + out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000)); + out32 (GPIO1_OR, (in32 (GPIO1_OR) & ~0x00008040)); + udelay (100000); + return 0; +} +#endif + +#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +void ide_set_reset (int idereset) +{ + debug ("ide_reset(%d)\n", idereset); + if (idereset == 0) { + out32 (GPIO0_OR, (in32 (GPIO0_OR) | 0x00200000)); + } else { + out32 (GPIO0_OR, (in32 (GPIO0_OR) & ~0x00200000)); + } + udelay (10000); +} +#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ diff --git a/board/pcs440ep/u-boot.lds b/board/pcs440ep/u-boot.lds index 6ab476ab143..6506ccdcf36 100644 --- a/board/pcs440ep/u-boot.lds +++ b/board/pcs440ep/u-boot.lds @@ -65,6 +65,7 @@ SECTIONS { cpu/ppc4xx/start.o (.text) board/pcs440ep/init.o (.text) + lib_generic/sha1.o (.text) *(.text) *(.fixup) diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 5abc87dde64..b76449989bc 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -172,7 +172,7 @@ int testdram (void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose ) { unsigned long strap; @@ -192,7 +192,7 @@ int pci_pre_init(struct pci_controller * hose ) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index 2f28e9d87a3..1a8aacbdf12 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -176,7 +176,7 @@ int misc_init_r (void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long strap; @@ -193,7 +193,7 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index 78164725168..8a831fa35f1 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -313,7 +313,7 @@ long int fixed_sdram (void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose ) { unsigned long strap; @@ -330,7 +330,7 @@ int pci_pre_init(struct pci_controller * hose ) return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index b6add59bb48..f6f0e724437 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -507,6 +507,7 @@ int dram_init(void) void show_boot_progress(int val) { + if (val < -32) val = -1; /* let things compatible */ outb(val&0xff, 0x80); outb((val&0xff00)>>8, 0x680); } diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c index ed226fd6423..d119a7d9977 100644 --- a/board/sc520_spunk/sc520_spunk.c +++ b/board/sc520_spunk/sc520_spunk.c @@ -507,6 +507,7 @@ void show_boot_progress(int val) { int version = read_mmcr_byte(SC520_SYSINFO); + if (val < -32) val = -1; /* let things compatible */ if (version == 0) { /* PIO31-PIO16 Data */ write_mmcr_word(SC520_PIODATA31_16, diff --git a/board/smdk2400/lowlevel_init.S b/board/smdk2400/lowlevel_init.S index a5de806af55..a7959f391d0 100644 --- a/board/smdk2400/lowlevel_init.S +++ b/board/smdk2400/lowlevel_init.S @@ -117,7 +117,7 @@ #define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */ #define Trp 0x0 /* 2 clk */ #define Trc 0x3 /* 7 clk */ -#define Tchr 0x2 /* 3 clk */ +#define Tchr 0x2 /* 3 clk */ #define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */ diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c index 0fb233d818a..5882124150e 100644 --- a/board/stxssa/stxssa.c +++ b/board/stxssa/stxssa.c @@ -52,147 +52,147 @@ long int fixed_sdram (void); const iop_conf_t iop_conf_tab[4][32] = { /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ - /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ - /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ - /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ - /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ - /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ - /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ - /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ - /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ - /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ - /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ - /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ - /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ - /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ - /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ - /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ - /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ - /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ - /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ - /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ - /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ - /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ - /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ - /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ - /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ - /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ - /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */ - /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ + { /* conf ppar psor pdir podr pdat */ + /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ + /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ + /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ + /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ + /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ + /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ + /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ + /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ + /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ + /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ + /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ + /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ + /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ + /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ + /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ + /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ + /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ + /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ + /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ + /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ + /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ + /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ + /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ + /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ + /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ + /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ + /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ + /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ + /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ + /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ + /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */ + /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ }, /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ - /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ - /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ - /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ - /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */ - /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ - /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + { /* conf ppar psor pdir podr pdat */ + /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ + /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ + /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ + /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ + /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ + /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ + /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ + /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ + /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ + /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ + /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ + /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ + /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ + /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ + /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ + /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ + /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ + /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ + /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */ + /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ + /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ }, /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ - /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ - /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ - /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ - /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ - /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ - /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ - /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ - /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ - /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ - /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */ - /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ - /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ - /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ + { /* conf ppar psor pdir podr pdat */ + /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ + /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ + /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ + /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ + /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ + /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ + /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ + /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ + /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ + /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ + /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ + /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ + /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ + /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ + /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ + /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ + /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */ + /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ + /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ + /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ + /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ + /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */ + /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */ + /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ + /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ + /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ + /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ + /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ + /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ + /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ + /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ + /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ }, /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ - /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ - /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ - /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */ - /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TxD */ - /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ - /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C CLK */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + { /* conf ppar psor pdir podr pdat */ + /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ + /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ + /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ + /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */ + /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TxD */ + /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ + /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ + /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ + /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ + /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ + /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ + /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ + /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ + /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ + /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ + /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ + /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ + /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C CLK */ + /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ + /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ + /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ + /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ + /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ + /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ + /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ + /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ + /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ + /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ + /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ } }; @@ -227,12 +227,12 @@ reset_phy(void) #if (CONFIG_ETHER_INDEX == 2) bcsr->bcsr2 &= ~FETH2_RST; udelay(2); - bcsr->bcsr2 |= FETH2_RST; + bcsr->bcsr2 |= FETH2_RST; udelay(1000); #elif (CONFIG_ETHER_INDEX == 3) bcsr->bcsr3 &= ~FETH3_RST; udelay(2); - bcsr->bcsr3 |= FETH3_RST; + bcsr->bcsr3 |= FETH3_RST; udelay(1000); #endif #if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC) @@ -252,10 +252,10 @@ int board_early_init_f(void) { #if defined(CONFIG_PCI) - volatile immap_t *immr = (immap_t *)CFG_IMMR; - volatile ccsr_pcix_t *pci = &immr->im_pcix; + volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile ccsr_pcix_t *pci = &immr->im_pcix; - pci->peer &= 0xfffffffdf; /* disable master abort */ + pci->peer &= 0xffffffdf; /* disable master abort */ #endif /* Why is the phy reset done _after_ the ethernet diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index a4322b6661a..cf97603afc5 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -32,6 +32,10 @@ #include <pci.h> #include <asm/processor.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#endif + #ifdef CONFIG_VIDEO_SM501 #include <sm501.h> #endif @@ -775,3 +779,10 @@ int board_get_height (void) } #endif /* CONFIG_VIDEO_SM501 */ + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} +#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c index a569b534727..8411cf06f76 100644 --- a/board/xpedite1k/xpedite1k.c +++ b/board/xpedite1k/xpedite1k.c @@ -209,7 +209,7 @@ long int fixed_sdram (void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose ) { unsigned long strap; @@ -227,7 +227,7 @@ int pci_pre_init(struct pci_controller * hose ) #endif return 1; } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ +#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init diff --git a/common/Makefile b/common/Makefile index bc1f7145056..ef7d0970789 100644 --- a/common/Makefile +++ b/common/Makefile @@ -38,8 +38,8 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \ cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \ cmd_nand.o cmd_net.o cmd_nvedit.o \ cmd_pci.o cmd_pcmcia.o cmd_portio.o \ - cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \ - cmd_usb.o cmd_vfd.o \ + cmd_reginfo.o cmd_reiser.o cmd_sata.o cmd_scsi.o cmd_spi.o \ + cmd_universe.o cmd_usb.o cmd_vfd.o \ command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \ environment.o env_common.o \ env_nand.o env_dataflash.o env_flash.o env_eeprom.o \ diff --git a/common/cmd_doc.c b/common/cmd_doc.c index ab375169531..4e624a2f3fa 100644 --- a/common/cmd_doc.c +++ b/common/cmd_doc.c @@ -216,6 +216,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) image_header_t *hdr; int rcode = 0; + SHOW_BOOT_PROGRESS (34); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -236,24 +237,27 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-35); return 1; } + SHOW_BOOT_PROGRESS (35); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-36); return 1; } + SHOW_BOOT_PROGRESS (36); dev = simple_strtoul(boot_device, &ep, 16); if ((dev >= CFG_MAX_DOC_DEVICE) || (doc_dev_desc[dev].ChipID == DOC_ChipID_UNKNOWN)) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-37); return 1; } + SHOW_BOOT_PROGRESS (37); printf ("\nLoading from device %d: %s at 0x%lX (offset 0x%lX)\n", dev, doc_dev_desc[dev].name, doc_dev_desc[dev].physadr, @@ -262,9 +266,10 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (doc_rw (doc_dev_desc + dev, 1, offset, SECTORSIZE, NULL, (u_char *)addr)) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-38); return 1; } + SHOW_BOOT_PROGRESS (38); hdr = (image_header_t *)addr; @@ -276,16 +281,18 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cnt -= SECTORSIZE; } else { puts ("\n** Bad Magic Number **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-39); return 1; } + SHOW_BOOT_PROGRESS (39); if (doc_rw (doc_dev_desc + dev, 1, offset + SECTORSIZE, cnt, NULL, (u_char *)(addr+SECTORSIZE))) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-40); return 1; } + SHOW_BOOT_PROGRESS (40); /* Loading ok, update default load address */ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index e308474af71..c74cde96e89 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -185,6 +185,9 @@ static void input_data(int dev, ulong *sect_buf, int words); static void output_data(int dev, ulong *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); +#ifndef CFG_ATA_PORT_ADDR +#define CFG_ATA_PORT_ADDR(port) (port) +#endif #ifdef CONFIG_ATAPI static void atapi_inquiry(block_dev_desc_t *dev_desc); @@ -382,6 +385,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) image_header_t *hdr; int rcode = 0; + SHOW_BOOT_PROGRESS (41); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -397,44 +401,50 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-42); return 1; } + SHOW_BOOT_PROGRESS (42); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-43); return 1; } + SHOW_BOOT_PROGRESS (43); dev = simple_strtoul(boot_device, &ep, 16); if (ide_dev_desc[dev].type==DEV_TYPE_UNKNOWN) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-44); return 1; } + SHOW_BOOT_PROGRESS (44); if (*ep) { if (*ep != ':') { puts ("\n** Invalid boot device, use `dev[:part]' **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-45); return 1; } part = simple_strtoul(++ep, NULL, 16); } + SHOW_BOOT_PROGRESS (45); if (get_partition_info (&ide_dev_desc[dev], part, &info)) { - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-46); return 1; } + SHOW_BOOT_PROGRESS (46); if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) && (strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) { printf ("\n** Invalid partition type \"%.32s\"" " (expect \"" BOOT_PART_TYPE "\")\n", info.type); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-47); return 1; } + SHOW_BOOT_PROGRESS (47); printf ("\nLoading from IDE device %d, partition %d: " "Name: %.32s Type: %.32s\n", @@ -445,26 +455,29 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) != 1) { printf ("** Read error on %d:%d\n", dev, part); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-48); return 1; } + SHOW_BOOT_PROGRESS (48); hdr = (image_header_t *)addr; if (ntohl(hdr->ih_magic) != IH_MAGIC) { printf("\n** Bad Magic Number **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-49); return 1; } + SHOW_BOOT_PROGRESS (49); checksum = ntohl(hdr->ih_hcrc); hdr->ih_hcrc = 0; if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) { puts ("\n** Bad Header Checksum **\n"); - SHOW_BOOT_PROGRESS (-2); + SHOW_BOOT_PROGRESS (-50); return 1; } + SHOW_BOOT_PROGRESS (50); hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */ print_image_hdr (hdr); @@ -477,9 +490,10 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (ide_dev_desc[dev].block_read (dev, info.start+1, cnt, (ulong *)(addr+info.blksz)) != cnt) { printf ("** Read error on %d:%d\n", dev, part); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-51); return 1; } + SHOW_BOOT_PROGRESS (51); /* Loading ok, update default load address */ @@ -807,13 +821,13 @@ ide_outb(int dev, int port, unsigned char val) /* Ensure I/O operations complete */ EIEIO; - *((uchar *)(ATA_CURR_BASE(dev)+port)) = val; + *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val; } #else /* ! __PPC__ */ static void __inline__ ide_outb(int dev, int port, unsigned char val) { - outb(val, ATA_CURR_BASE(dev)+port); + outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)); } #endif /* __PPC__ */ @@ -825,7 +839,7 @@ ide_inb(int dev, int port) uchar val; /* Ensure I/O operations complete */ EIEIO; - val = *((uchar *)(ATA_CURR_BASE(dev)+port)); + val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", dev, port, (ATA_CURR_BASE(dev)+port), val); return (val); @@ -834,7 +848,7 @@ ide_inb(int dev, int port) static unsigned char __inline__ ide_inb(int dev, int port) { - return inb(ATA_CURR_BASE(dev)+port); + return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)); } #endif /* __PPC__ */ @@ -891,6 +905,9 @@ input_swap_data(int dev, ulong *sect_buf, int words) #ifdef __MIPS__ *dbuf++ = swab16p((u16*)pbuf); *dbuf++ = swab16p((u16*)pbuf); +#elif defined(CONFIG_PCS440EP) + *dbuf++ = *pbuf; + *dbuf++ = *pbuf; #else *dbuf++ = ld_le16(pbuf); *dbuf++ = ld_le16(pbuf); @@ -930,10 +947,18 @@ output_data(int dev, ulong *sect_buf, int words) pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG); dbuf = (ushort *)sect_buf; while (words--) { +#if defined(CONFIG_PCS440EP) + /* not tested, because CF was write protected */ + EIEIO; + *pbuf = ld_le16(dbuf++); + EIEIO; + *pbuf = ld_le16(dbuf++); +#else EIEIO; *pbuf = *dbuf++; EIEIO; *pbuf = *dbuf++; +#endif } #endif } @@ -981,10 +1006,17 @@ input_data(int dev, ulong *sect_buf, int words) debug("in input data base for read is %lx\n", (unsigned long) pbuf); while (words--) { +#if defined(CONFIG_PCS440EP) + EIEIO; + *dbuf++ = ld_le16(pbuf); + EIEIO; + *dbuf++ = ld_le16(pbuf); +#else EIEIO; *dbuf++ = *pbuf; EIEIO; *dbuf++ = *pbuf; +#endif } #endif } diff --git a/common/cmd_log.c b/common/cmd_log.c index 042a403026f..fba8bd8bf5c 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2002 + * (C) Copyright 2002-2007 * Detlev Zundel, DENX Software Engineering, dzu@denx.de. * * Code used from linux/kernel/printk.c @@ -60,45 +60,40 @@ static char buf[1024]; /* This combination will not print messages with the default loglevel */ static unsigned console_loglevel = 3; static unsigned default_message_loglevel = 4; -static unsigned char *log_buf = NULL; -static unsigned long *ext_log_size; -static unsigned long *ext_log_start; -static unsigned long *ext_logged_chars; -#define log_size (*ext_log_size) -#define log_start (*ext_log_start) -#define logged_chars (*ext_logged_chars) +static unsigned log_version = 1; +static logbuff_t *log; -/* Forced by code, eh! */ -#define LOGBUFF_MAGIC 0xc0de4ced - -/* The mapping used here has to be the same as in setup_ext_logbuff () - in linux/kernel/printk */ void logbuff_init_ptrs (void) { - unsigned long *ext_tag; - unsigned long post_word; + unsigned long tag, post_word; char *s; - log_buf = (unsigned char *)(gd->bd->bi_memsize-LOGBUFF_LEN); - ext_tag = (unsigned long *)(log_buf)-4; - ext_log_start = (unsigned long *)(log_buf)-3; - ext_log_size = (unsigned long *)(log_buf)-2; - ext_logged_chars = (unsigned long *)(log_buf)-1; + log = (logbuff_t *)(gd->bd->bi_memsize-LOGBUFF_LEN) - 1; + + /* Set up log version */ + if ((s = getenv ("logversion")) != NULL) + log_version = (int)simple_strtoul (s, NULL, 10); + + if (log_version == 2) + tag = log->v2.tag; + else + tag = log->v1.tag; post_word = post_word_load(); #ifdef CONFIG_POST /* The post routines have setup the word so we can simply test it */ - if (post_word_load () & POST_COLDBOOT) { - logged_chars = log_size = log_start = 0; - *ext_tag = LOGBUFF_MAGIC; - } + if (tag != LOGBUFF_MAGIC || (post_word & POST_COLDBOOT)) { + logbuff_reset (); + } #else /* No post routines, so we do our own checking */ - if (post_word != LOGBUFF_MAGIC) { - logged_chars = log_size = log_start = 0; + if (tag != LOGBUFF_MAGIC || post_word != LOGBUFF_MAGIC) { + logbuff_reset (); post_word_store (LOGBUFF_MAGIC); - *ext_tag = LOGBUFF_MAGIC; - } + } #endif + if (log_version == 2 && (long)log->v2.start > (long)log->v2.con) + log->v2.start = log->v2.con; + /* Initialize default loglevel if present */ if ((s = getenv ("loglevel")) != NULL) console_loglevel = (int)simple_strtoul (s, NULL, 10); @@ -106,6 +101,15 @@ void logbuff_init_ptrs (void) gd->post_log_word |= LOGBUFF_INITIALIZED; } +void logbuff_reset (void) +{ + memset (log, 0, sizeof (logbuff_t)); + if (log_version == 2) + log->v2.tag = LOGBUFF_MAGIC; + else + log->v1.tag = LOGBUFF_MAGIC; +} + int drv_logbuff_init (void) { device_t logdev; @@ -162,7 +166,7 @@ void logbuff_log(char *msg) int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { char *s; - unsigned long i; + unsigned long i, start, size; if (strcmp(argv[1],"append") == 0) { /* Log concatenation of all arguments separated by spaces */ @@ -177,21 +181,34 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) case 2: if (strcmp(argv[1],"show") == 0) { - for (i=0; i < (log_size&LOGBUFF_MASK); i++) { - s = (char *)log_buf+((log_start+i)&LOGBUFF_MASK); + if (log_version == 2) { + start = log->v2.start; + size = log->v2.end - log->v2.start; + } + else { + start = log->v1.start; + size = log->v1.size; + } + for (i=0; i < (size&LOGBUFF_MASK); i++) { + s = (char *)log->buf+((start+i)&LOGBUFF_MASK); putc (*s); } return 0; } else if (strcmp(argv[1],"reset") == 0) { - log_start = 0; - log_size = 0; - logged_chars = 0; + logbuff_reset (); return 0; } else if (strcmp(argv[1],"info") == 0) { - printf ("Logbuffer at %08lx\n", (unsigned long)log_buf); - printf ("log_start = %08lx\n", log_start); - printf ("log_size = %08lx\n", log_size); - printf ("logged_chars = %08lx\n", logged_chars); + printf ("Logbuffer at %08lx\n", (unsigned long)log->buf); + if (log_version == 2) { + printf ("log_start = %08lx\n", log->v2.start); + printf ("log_end = %08lx\n", log->v2.end); + printf ("logged_chars = %08lx\n", log->v2.chars); + } + else { + printf ("log_start = %08lx\n", log->v1.start); + printf ("log_size = %08lx\n", log->v1.size); + printf ("logged_chars = %08lx\n", log->v1.chars); + } return 0; } printf ("Usage:\n%s\n", cmdtp->usage); @@ -202,7 +219,7 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } } -#if defined(CONFIG_LOGBUFFER) + U_BOOT_CMD( log, 255, 1, do_log, "log - manipulate logbuffer\n", @@ -211,7 +228,7 @@ U_BOOT_CMD( "log show - show contents\n" "log append <msg> - append <msg> to the logbuffer\n" ); -#endif /* CONFIG_LOGBUFFER */ + static int logbuff_printk(const char *line) { int i; @@ -241,13 +258,22 @@ static int logbuff_printk(const char *line) } line_feed = 0; for (; p < buf_end; p++) { - log_buf[(log_start+log_size) & LOGBUFF_MASK] = *p; - if (log_size < LOGBUFF_LEN) - log_size++; - else - log_start++; - - logged_chars++; + if (log_version == 2) { + log->buf[log->v2.end & LOGBUFF_MASK] = *p; + log->v2.end++; + if (log->v2.end - log->v2.start > LOGBUFF_LEN) + log->v2.start++; + log->v2.chars++; + } + else { + log->buf[(log->v1.start + log->v1.size) & + LOGBUFF_MASK] = *p; + if (log->v1.size < LOGBUFF_LEN) + log->v1.size++; + else + log->v1.start++; + log->v1.chars++; + } if (*p == '\n') { line_feed = 1; break; diff --git a/common/cmd_nand.c b/common/cmd_nand.c index b011b5e3ded..b088150f3bf 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -486,17 +486,19 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-56); return 1; } + SHOW_BOOT_PROGRESS(56); hdr = (image_header_t *) addr; if (ntohl(hdr->ih_magic) != IH_MAGIC) { printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-57); return 1; } + SHOW_BOOT_PROGRESS(57); print_image_hdr(hdr); @@ -505,9 +507,10 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-58); return 1; } + SHOW_BOOT_PROGRESS(58); /* Loading ok, update default load address */ @@ -559,6 +562,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } #endif + SHOW_BOOT_PROGRESS(52); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -582,23 +586,26 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) usage: #endif printf("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-53); return 1; } + SHOW_BOOT_PROGRESS(53); if (!boot_device) { puts("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-54); return 1; } + SHOW_BOOT_PROGRESS(54); idx = simple_strtoul(boot_device, NULL, 16); if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) { printf("\n** Device %d not available\n", idx); - SHOW_BOOT_PROGRESS(-1); + SHOW_BOOT_PROGRESS(-55); return 1; } + SHOW_BOOT_PROGRESS(55); return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]); } @@ -887,6 +894,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ulong offset = 0; image_header_t *hdr; int rcode = 0; + SHOW_BOOT_PROGRESS(52); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -907,24 +915,27 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-53); return 1; } + SHOW_BOOT_PROGRESS(53); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-54); return 1; } + SHOW_BOOT_PROGRESS(54); dev = simple_strtoul(boot_device, &ep, 16); if ((dev >= CFG_MAX_NAND_DEVICE) || (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-55); return 1; } + SHOW_BOOT_PROGRESS(55); printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n", dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR, @@ -933,9 +944,10 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset, SECTORSIZE, NULL, (u_char *)addr)) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-56); return 1; } + SHOW_BOOT_PROGRESS(56); hdr = (image_header_t *)addr; @@ -947,17 +959,19 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cnt -= SECTORSIZE; } else { printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic)); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-57); return 1; } + SHOW_BOOT_PROGRESS(57); if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset + SECTORSIZE, cnt, NULL, (u_char *)(addr+SECTORSIZE))) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-58); return 1; } + SHOW_BOOT_PROGRESS(58); /* Loading ok, update default load address */ diff --git a/common/cmd_net.c b/common/cmd_net.c index 2cb2c5d34be..e9d552e2352 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -30,6 +30,13 @@ #if (CONFIG_COMMANDS & CFG_CMD_NET) +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# include <status_led.h> +extern void show_boot_progress (int val); +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif extern int do_bootm (cmd_tbl_t *, int, int, char *[]); @@ -184,18 +191,25 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); + SHOW_BOOT_PROGRESS(-80); return 1; } - if ((size = NetLoop(proto)) < 0) + SHOW_BOOT_PROGRESS(80); + if ((size = NetLoop(proto)) < 0) { + SHOW_BOOT_PROGRESS(-81); return 1; + } + SHOW_BOOT_PROGRESS(81); /* NetLoop ok, update environment */ netboot_update_env(); /* done if no file was loaded (no errors though) */ - if (size == 0) + if (size == 0) { + SHOW_BOOT_PROGRESS(-82); return 0; + } /* flush cache */ flush_cache(load_addr, size); @@ -208,15 +222,23 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) printf ("Automatic boot of image at addr 0x%08lX ...\n", load_addr); + SHOW_BOOT_PROGRESS(82); rcode = do_bootm (cmdtp, 0, 1, local_args); } #ifdef CONFIG_AUTOSCRIPT if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { printf("Running autoscript at addr 0x%08lX ...\n", load_addr); + SHOW_BOOT_PROGRESS(83); rcode = autoscript (load_addr); } #endif +#if defined(CONFIG_SHOW_BOOT_PROGRESS) + if (rcode < 0) + SHOW_BOOT_PROGRESS(-83); + else + SHOW_BOOT_PROGRESS(84); +#endif return rcode; } diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index 09c86e66d76..d83c31ab3fe 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -90,7 +90,7 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } if (!reiserfs_mount(part_length)) { - printf ("** Bad Reisefs partition or disk - %s %d:%d **\n", argv[1], dev, part); + printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part); return 1; } @@ -183,7 +183,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } - if (strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) { + if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) { printf ("\n** Invalid partition type \"%.32s\"" " (expect \"" BOOT_PART_TYPE "\")\n", info.type); @@ -204,7 +204,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } if (!reiserfs_mount(part_length)) { - printf ("** Bad Reisefs partition or disk - %s %d:%d **\n", argv[1], dev, part); + printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part); return 1; } diff --git a/common/cmd_sata.c b/common/cmd_sata.c new file mode 100644 index 00000000000..bd4c11fd9b7 --- /dev/null +++ b/common/cmd_sata.c @@ -0,0 +1,712 @@ +/* + * Copyright (C) Procsys. All rights reserved. + * Author: Mushtaq Khan <mushtaq_k@procsys.com> + * <mushtaqk_921@yahoo.co.in> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * with the reference to libata in kernel 2.4.32 + * + */ + +/* + * File contains SATA read-write and other utility functions. + */ +#include <common.h> +#include <asm/io.h> +#include <pci.h> +#include <command.h> +#include <config.h> +#include <ide.h> +#include <ata.h> + +#ifdef CFG_SATA_SUPPORTED +/*For debug prints set macro DEBUG_SATA to 1 */ +#define DEBUG_SATA 0 +/*Macro for SATA library specific declarations */ +#define SATA_DECL +#include <sata.h> +#undef SATA_DECL + +static u8 __inline__ +sata_inb (unsigned long ioaddr) +{ + return inb (ioaddr); +} + +static void __inline__ +sata_outb (unsigned char val, unsigned long ioaddr) +{ + outb (val, ioaddr); +} + +static void +output_data (struct sata_ioports *ioaddr, ulong * sect_buf, int words) +{ + outsw (ioaddr->data_addr, sect_buf, words << 1); +} + +static int +input_data (struct sata_ioports *ioaddr, ulong * sect_buf, int words) +{ + insw (ioaddr->data_addr, sect_buf, words << 1); + return 0; +} + +static void +sata_cpy (unsigned char *dst, unsigned char *src, unsigned int len) +{ + unsigned char *end, *last; + + last = dst; + end = src + len - 1; + + /* reserve space for '\0' */ + if (len < 2) + goto OUT; + + /* skip leading white space */ + while ((*src) && (src < end) && (*src == ' ')) + ++src; + + /* copy string, omitting trailing white space */ + while ((*src) && (src < end)) { + *dst++ = *src; + if (*src++ != ' ') + last = dst; + } + OUT: + *last = '\0'; +} + +int +sata_bus_softreset (int num) +{ + u8 dev = 0, status = 0, i; + + port[num].dev_mask = 0; + + for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) { + if (!(sata_devchk (&port[num].ioaddr, i))) { + PRINTF ("dev_chk failed for dev#%d\n", i); + } else { + port[num].dev_mask |= (1 << i); + PRINTF ("dev_chk passed for dev#%d\n", i); + } + } + + if (!(port[num].dev_mask)) { + printf ("no devices on port%d\n", num); + return 1; + } + + dev_select (&port[num].ioaddr, dev); + + port[num].ctl_reg = 0x08; /*Default value of control reg */ + sata_outb (port[num].ctl_reg, port[num].ioaddr.ctl_addr); + udelay (10); + sata_outb (port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr); + udelay (10); + sata_outb (port[num].ctl_reg, port[num].ioaddr.ctl_addr); + + /* spec mandates ">= 2ms" before checking status. + * We wait 150ms, because that was the magic delay used for + * ATAPI devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + */ + msleep (150); + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 300); + while ((status & ATA_BUSY)) { + msleep (100); + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 3); + } + + if (status & ATA_BUSY) + printf ("ata%u is slow to respond,plz be patient\n", port); + + while ((status & ATA_BUSY)) { + msleep (100); + status = sata_chk_status (&port[num].ioaddr); + } + + if (status & ATA_BUSY) { + printf ("ata%u failed to respond : ", port); + printf ("bus reset failed\n"); + return 1; + } + return 0; +} + +void +sata_identify (int num, int dev) +{ + u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev; + u16 iobuf[ATA_SECT_SIZE]; + u64 n_sectors = 0; + u8 mask = 0; + + memset (iobuf, 0, sizeof (iobuf)); + hd_driveid_t *iop = (hd_driveid_t *) iobuf; + + if (dev == 0) + mask = 0x01; + else + mask = 0x02; + + if (!(port[num].dev_mask & mask)) { + printf ("dev%d is not present on port#%d\n", dev, num); + return; + } + + printf ("port=%d dev=%d\n", num, dev); + + dev_select (&port[num].ioaddr, dev); + + status = 0; + cmd = ATA_CMD_IDENT; /*Device Identify Command */ + sata_outb (cmd, port[num].ioaddr.command_addr); + sata_inb (port[num].ioaddr.altstatus_addr); + udelay (10); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000); + if (status & ATA_ERR) { + printf ("\ndevice not responding\n"); + port[num].dev_mask &= ~mask; + return; + } + + input_data (&port[num].ioaddr, (ulong *) iobuf, ATA_SECTORWORDS); + + PRINTF ("\nata%u: dev %u cfg 49:%04x 82:%04x 83:%04x 84:%04x85:%04x" + "86:%04x" "87:%04x 88:%04x\n", num, dev, iobuf[49], + iobuf[82], iobuf[83], iobuf[84], iobuf[85], iobuf[86], + iobuf[87], iobuf[88]); + + /* we require LBA and DMA support (bits 8 & 9 of word 49) */ + if (!ata_id_has_dma (iobuf) || !ata_id_has_lba (iobuf)) { + PRINTF ("ata%u: no dma/lba\n", num); + } + ata_dump_id (iobuf); + + if (ata_id_has_lba48 (iobuf)) { + n_sectors = ata_id_u64 (iobuf, 100); + } else { + n_sectors = ata_id_u32 (iobuf, 60); + } + PRINTF ("no. of sectors %u\n", ata_id_u64 (iobuf, 100)); + PRINTF ("no. of sectors %u\n", ata_id_u32 (iobuf, 60)); + + if (n_sectors == 0) { + port[num].dev_mask &= ~mask; + return; + } + + sata_cpy (sata_dev_desc[devno].revision, iop->fw_rev, + sizeof (sata_dev_desc[devno].revision)); + sata_cpy (sata_dev_desc[devno].vendor, iop->model, + sizeof (sata_dev_desc[devno].vendor)); + sata_cpy (sata_dev_desc[devno].product, iop->serial_no, + sizeof (sata_dev_desc[devno].product)); + strswab (sata_dev_desc[devno].revision); + strswab (sata_dev_desc[devno].vendor); + + if ((iop->config & 0x0080) == 0x0080) { + sata_dev_desc[devno].removable = 1; + } else { + sata_dev_desc[devno].removable = 0; + } + + sata_dev_desc[devno].lba = iop->lba_capacity; + PRINTF ("lba=0x%x", sata_dev_desc[devno].lba); + +#ifdef CONFIG_LBA48 + if (iop->command_set_2 & 0x0400) { + sata_dev_desc[devno].lba48 = 1; + lba = (unsigned long long) iop->lba48_capacity[0] | + ((unsigned long long) iop->lba48_capacity[1] << 16) | + ((unsigned long long) iop->lba48_capacity[2] << 32) | + ((unsigned long long) iop->lba48_capacity[3] << 48); + } else { + sata_dev_desc[devno].lba48 = 0; + } +#endif + + /* assuming HD */ + sata_dev_desc[devno].type = DEV_TYPE_HARDDISK; + sata_dev_desc[devno].blksz = ATA_BLOCKSIZE; + sata_dev_desc[devno].lun = 0; /* just to fill something in... */ +} + +void +set_Feature_cmd (int num, int dev) +{ + u8 mask = 0x00, status = 0; + + if (dev == 0) + mask = 0x01; + else + mask = 0x02; + + if (!(port[num].dev_mask & mask)) { + PRINTF ("dev%d is not present on port#%d\n", dev, num); + return; + } + + dev_select (&port[num].ioaddr, dev); + + sata_outb (SETFEATURES_XFER, port[num].ioaddr.feature_addr); + sata_outb (XFER_PIO_4, port[num].ioaddr.nsect_addr); + sata_outb (0, port[num].ioaddr.lbal_addr); + sata_outb (0, port[num].ioaddr.lbam_addr); + sata_outb (0, port[num].ioaddr.lbah_addr); + + sata_outb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr); + sata_outb (ATA_CMD_SETF, port[num].ioaddr.command_addr); + + udelay (50); + msleep (150); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000); + if ((status & (ATA_STAT_BUSY | ATA_STAT_ERR))) { + printf ("Error : status 0x%02x\n", status); + port[num].dev_mask &= ~mask; + } +} + +void +sata_port (struct sata_ioports *ioport) +{ + ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA; + ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR; + ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE; + ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT; + ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL; + ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM; + ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH; + ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE; + ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS; + ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD; +} + +int +sata_devchk (struct sata_ioports *ioaddr, int dev) +{ + u8 nsect, lbal; + + dev_select (ioaddr, dev); + + sata_outb (0x55, ioaddr->nsect_addr); + sata_outb (0xaa, ioaddr->lbal_addr); + + sata_outb (0xaa, ioaddr->nsect_addr); + sata_outb (0x55, ioaddr->lbal_addr); + + sata_outb (0x55, ioaddr->nsect_addr); + sata_outb (0xaa, ioaddr->lbal_addr); + + nsect = sata_inb (ioaddr->nsect_addr); + lbal = sata_inb (ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + else + return 0; /* nothing found */ +} + +void +dev_select (struct sata_ioports *ioaddr, int dev) +{ + u8 tmp = 0; + + if (dev == 0) + tmp = ATA_DEVICE_OBS; + else + tmp = ATA_DEVICE_OBS | ATA_DEV1; + + sata_outb (tmp, ioaddr->device_addr); + sata_inb (ioaddr->altstatus_addr); + udelay (5); +} + +u8 +sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max) +{ + u8 status; + + do { + udelay (1000); + status = sata_chk_status (ioaddr); + max--; + } while ((status & bits) && (max > 0)); + + return status; +} + +u8 +sata_chk_status (struct sata_ioports * ioaddr) +{ + return sata_inb (ioaddr->status_addr); +} + +void +msleep (int count) +{ + int i; + + for (i = 0; i < count; i++) + udelay (1000); +} + +ulong +sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff) +{ + ulong n = 0, *buffer = (ulong *)buff; + u8 dev = 0, num = 0, mask = 0, status = 0; + +#ifdef CONFIG_LBA48 + unsigned char lba48 = 0; + + if (blknr & 0x0000fffff0000000) { + if (!sata_dev_desc[devno].lba48) { + printf ("Drive doesn't support 48-bit addressing\n"); + return 0; + } + /* more than 28 bits used, use 48bit mode */ + lba48 = 1; + } +#endif + /*Port Number */ + num = device / CFG_SATA_DEVS_PER_BUS; + /*dev on the port */ + if (device >= CFG_SATA_DEVS_PER_BUS) + dev = device - CFG_SATA_DEVS_PER_BUS; + else + dev = device; + + if (dev == 0) + mask = 0x01; + else + mask = 0x02; + + if (!(port[num].dev_mask & mask)) { + printf ("dev%d is not present on port#%d\n", dev, num); + return 0; + } + + /* Select device */ + dev_select (&port[num].ioaddr, dev); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500); + if (status & ATA_BUSY) { + printf ("ata%u failed to respond\n", port[num].port_no); + return n; + } + while (blkcnt-- > 0) { + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500); + if (status & ATA_BUSY) { + printf ("ata%u failed to respond\n", 0); + return n; + } +#ifdef CONFIG_LBA48 + if (lba48) { + /* write high bits */ + sata_outb (0, port[num].ioaddr.nsect_addr); + sata_outb ((blknr >> 24) & 0xFF, + port[num].ioaddr.lbal_addr); + sata_outb ((blknr >> 32) & 0xFF, + port[num].ioaddr.lbam_addr); + sata_outb ((blknr >> 40) & 0xFF, + port[num].ioaddr.lbah_addr); + } +#endif + sata_outb (1, port[num].ioaddr.nsect_addr); + sata_outb (((blknr) >> 0) & 0xFF, + port[num].ioaddr.lbal_addr); + sata_outb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr); + sata_outb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr); + +#ifdef CONFIG_LBA48 + if (lba48) { + sata_outb (ATA_LBA, port[num].ioaddr.device_addr); + sata_outb (ATA_CMD_READ_EXT, + port[num].ioaddr.command_addr); + } else +#endif + { + sata_outb (ATA_LBA | ((blknr >> 24) & 0xF), + port[num].ioaddr.device_addr); + sata_outb (ATA_CMD_READ, + port[num].ioaddr.command_addr); + } + + msleep (50); + /*may take up to 4 sec */ + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000); + + if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) + != ATA_STAT_DRQ) { + u8 err = 0; + + printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n", + device, (ulong) blknr, status); + err = sata_inb (port[num].ioaddr.error_addr); + printf ("Error reg = 0x%x\n", err); + return (n); + } + input_data (&port[num].ioaddr, buffer, ATA_SECTORWORDS); + sata_inb (port[num].ioaddr.altstatus_addr); + udelay (50); + + ++n; + ++blknr; + buffer += ATA_SECTORWORDS; + } + return n; +} + +ulong +sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff) +{ + ulong n = 0, *buffer = (ulong *)buff; + unsigned char status = 0, num = 0, dev = 0, mask = 0; + +#ifdef CONFIG_LBA48 + unsigned char lba48 = 0; + + if (blknr & 0x0000fffff0000000) { + if (!sata_dev_desc[devno].lba48) { + printf ("Drive doesn't support 48-bit addressing\n"); + return 0; + } + /* more than 28 bits used, use 48bit mode */ + lba48 = 1; + } +#endif + /*Port Number */ + num = device / CFG_SATA_DEVS_PER_BUS; + /*dev on the Port */ + if (device >= CFG_SATA_DEVS_PER_BUS) + dev = device - CFG_SATA_DEVS_PER_BUS; + else + dev = device; + + if (dev == 0) + mask = 0x01; + else + mask = 0x02; + + /* Select device */ + dev_select (&port[num].ioaddr, dev); + + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500); + if (status & ATA_BUSY) { + printf ("ata%u failed to respond\n", port[num].port_no); + return n; + } + + while (blkcnt-- > 0) { + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500); + if (status & ATA_BUSY) { + printf ("ata%u failed to respond\n", + port[num].port_no); + return n; + } +#ifdef CONFIG_LBA48 + if (lba48) { + /* write high bits */ + sata_outb (0, port[num].ioaddr.nsect_addr); + sata_outb ((blknr >> 24) & 0xFF, + port[num].ioaddr.lbal_addr); + sata_outb ((blknr >> 32) & 0xFF, + port[num].ioaddr.lbam_addr); + sata_outb ((blknr >> 40) & 0xFF, + port[num].ioaddr.lbah_addr); + } +#endif + sata_outb (1, port[num].ioaddr.nsect_addr); + sata_outb ((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr); + sata_outb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr); + sata_outb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr); +#ifdef CONFIG_LBA48 + if (lba48) { + sata_outb (ATA_LBA, port[num].ioaddr.device_addr); + sata_outb (ATA_CMD_WRITE_EXT, + port[num].ioaddr.command_addr); + } else +#endif + { + sata_outb (ATA_LBA | ((blknr >> 24) & 0xF), + port[num].ioaddr.device_addr); + sata_outb (ATA_CMD_WRITE, + port[num].ioaddr.command_addr); + } + + msleep (50); + /*may take up to 4 sec */ + status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000); + if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) + != ATA_STAT_DRQ) { + printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n", + device, (ulong) blknr, status); + return (n); + } + + output_data (&port[num].ioaddr, buffer, ATA_SECTORWORDS); + sata_inb (port[num].ioaddr.altstatus_addr); + udelay (50); + + ++n; + ++blknr; + buffer += ATA_SECTORWORDS; + } + return n; +} + +block_dev_desc_t *sata_get_dev (int dev); + +block_dev_desc_t * +sata_get_dev (int dev) +{ + return ((block_dev_desc_t *) & sata_dev_desc[dev]); +} + +int +do_sata (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + + switch (argc) { + case 0: + case 1: + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + case 2: + if (strncmp (argv[1], "init", 4) == 0) { + int rcode = 0; + + rcode = init_sata (); + if (rcode) + printf ("Sata initialization Failed\n"); + return rcode; + } else if (strncmp (argv[1], "inf", 3) == 0) { + int i; + + putc ('\n'); + for (i = 0; i < CFG_SATA_MAXDEVICES; ++i) { + /*List only known devices */ + if (sata_dev_desc[i].type == + DEV_TYPE_UNKNOWN) + continue; + printf ("sata dev %d: ", i); + dev_print (&sata_dev_desc[i]); + } + return 0; + } + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + case 3: + if (strcmp (argv[1], "dev") == 0) { + int dev = (int) simple_strtoul (argv[2], NULL, 10); + + if (dev >= CFG_SATA_MAXDEVICES) { + printf ("\nSata dev %d not available\n", + dev); + return 1; + } + printf ("\nSATA dev %d: ", dev); + dev_print (&sata_dev_desc[dev]); + if (sata_dev_desc[dev].type == DEV_TYPE_UNKNOWN) + return 1; + curr_dev = dev; + return 0; + } else if (strcmp (argv[1], "part") == 0) { + int dev = (int) simple_strtoul (argv[2], NULL, 10); + + if (dev >= CFG_SATA_MAXDEVICES) { + printf ("\nSata dev %d not available\n", + dev); + return 1; + } + PRINTF ("\nSATA dev %d: ", dev); + if (sata_dev_desc[dev].part_type != + PART_TYPE_UNKNOWN) { + print_part (&sata_dev_desc[dev]); + } else { + printf ("\nSata dev %d partition type " + "unknown\n", dev); + return 1; + } + return 0; + } + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + default: + if (argc < 5) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + if (strcmp (argv[1], "read") == 0) { + ulong addr = simple_strtoul (argv[2], NULL, 16); + ulong cnt = simple_strtoul (argv[4], NULL, 16); + ulong n; + lbaint_t blk = simple_strtoul (argv[3], NULL, 16); + + memset ((int *) addr, 0, cnt * 512); + printf ("\nSATA read: dev %d blk # %ld," + "count %ld ... ", curr_dev, blk, cnt); + n = sata_read (curr_dev, blk, cnt, (ulong *) addr); + /* flush cache after read */ + flush_cache (addr, cnt * 512); + printf ("%ld blocks read: %s\n", n, + (n == cnt) ? "OK" : "ERR"); + if (n == cnt) + return 1; + else + return 0; + } else if (strcmp (argv[1], "write") == 0) { + ulong addr = simple_strtoul (argv[2], NULL, 16); + ulong cnt = simple_strtoul (argv[4], NULL, 16); + ulong n; + lbaint_t blk = simple_strtoul (argv[3], NULL, 16); + + printf ("\nSata write: dev %d blk # %ld," + "count %ld ... ", curr_dev, blk, cnt); + n = sata_write (curr_dev, blk, cnt, (ulong *) addr); + printf ("%ld blocks written: %s\n", n, + (n == cnt) ? "OK" : "ERR"); + if (n == cnt) + return 1; + else + return 0; + } else { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + } /*End OF SWITCH */ +} + +U_BOOT_CMD (sata, 5, 1, do_sata, + "sata init\n" + "sata info\n" + "sata part device\n" + "sata dev device\n" + "sata read addr blk# cnt\n" + "sata write addr blk# cnt\n", "cmd for init,rw and dev-info\n"); + +#endif diff --git a/common/env_common.c b/common/env_common.c index eb33422af4b..0462cad6d72 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -232,7 +232,7 @@ void env_relocate (void) puts ("Using default environment\n\n"); #else puts ("*** Warning - bad CRC, using default environment\n\n"); - SHOW_BOOT_PROGRESS (-1); + SHOW_BOOT_PROGRESS (-60); #endif if (sizeof(default_environment) > ENV_SIZE) diff --git a/common/main.c b/common/main.c index 553ac357dc3..a00ebc194c5 100644 --- a/common/main.c +++ b/common/main.c @@ -113,7 +113,7 @@ static __inline__ int abortboot(int bootdelay) u_int i; # ifdef CONFIG_AUTOBOOT_PROMPT - printf (CONFIG_AUTOBOOT_PROMPT, bootdelay); + printf(CONFIG_AUTOBOOT_PROMPT, bootdelay); # endif # ifdef CONFIG_AUTOBOOT_DELAY_STR @@ -187,7 +187,7 @@ static __inline__ int abortboot(int bootdelay) } # if DEBUG_BOOTKEYS if (!abort) - puts ("key timeout\n"); + puts("key timeout\n"); # endif #ifdef CONFIG_SILENT_CONSOLE @@ -244,13 +244,13 @@ static __inline__ int abortboot(int bootdelay) # endif break; } - udelay (10000); + udelay(10000); } - printf ("\b\b\b%2d ", bootdelay); + printf("\b\b\b%2d ", bootdelay); } - putc ('\n'); + putc('\n'); #ifdef CONFIG_SILENT_CONSOLE if (abort) @@ -962,7 +962,7 @@ int readline (const char *const prompt) n = 0; continue; - case 0x17: /* ^W - erase word */ + case 0x17: /* ^W - erase word */ p=delete_char(console_buffer, p, &col, &n, plen); while ((n > 0) && (*p != ' ')) { p=delete_char(console_buffer, p, &col, &n, plen); diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S index 11430388f50..b5834b91e3e 100644 --- a/cpu/74xx_7xx/start.S +++ b/cpu/74xx_7xx/start.S @@ -125,7 +125,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -143,7 +143,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/i386/start.S b/cpu/i386/start.S index afcbb24520b..1a54dd10e33 100644 --- a/cpu/i386/start.S +++ b/cpu/i386/start.S @@ -149,7 +149,7 @@ data_ok: .progress3: /* clear bss section in ram, size must be 4-byte aligned */ - movl $_i386boot_bss_start, %eax /* BSS start */ + movl $_i386boot_bss_start, %edi /* MK_CHG BSS start */ movl $_i386boot_bss_size, %ecx /* BSS size */ movl %ecx, %eax andl $3, %eax diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S index 087435e5bee..0637003ce29 100644 --- a/cpu/mpc5xx/start.S +++ b/cpu/mpc5xx/start.S @@ -155,7 +155,7 @@ in_flash: /* Initialize some SPRs that are hard to access from C */ /*----------------------------------------------------------------------*/ - lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */ + lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */ lis r2, CFG_INIT_SP_ADDR@h ori r1, r2, CFG_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */ /* Note: R0 is still 0 here */ @@ -210,7 +210,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -228,7 +228,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S index 3936b5551f3..9b1bd48c733 100644 --- a/cpu/mpc5xxx/start.S +++ b/cpu/mpc5xxx/start.S @@ -208,7 +208,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -227,7 +227,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc8220/start.S b/cpu/mpc8220/start.S index 52332023ec5..b5145ca035d 100644 --- a/cpu/mpc8220/start.S +++ b/cpu/mpc8220/start.S @@ -169,7 +169,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -188,7 +188,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc824x/start.S b/cpu/mpc824x/start.S index 9ff052c3b0e..784edc36a0c 100644 --- a/cpu/mpc824x/start.S +++ b/cpu/mpc824x/start.S @@ -220,7 +220,7 @@ _start_of_vectors: /* Alignment exception. */ . = EXC_OFF_ALIGN Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -238,7 +238,7 @@ Alignment: /* Program check exception */ . = EXC_OFF_PROGRAM ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S index 2e93bbbb864..7f5dc819cd8 100644 --- a/cpu/mpc8260/start.S +++ b/cpu/mpc8260/start.S @@ -279,7 +279,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -298,7 +298,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ @@ -676,13 +676,13 @@ init_debug: bdnz 1b /* Load the Instruction Address Breakpoint Register (IABR). */ - /* */ + /* */ /* The address to load is stored in the first word of dual port */ /* ram and should be preserved while the power is on, so you */ /* can plug addresses into that location then reset the cpu and */ /* this code will load that address into the IABR after the */ /* reset. */ - /* */ + /* */ /* When the program counter matches the contents of the IABR, */ /* an exception is generated (before the instruction at that */ /* location completes). The vector for this exception is 0x1300 */ diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index e078f27a23d..841fe82428d 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -415,7 +415,7 @@ static const struct { "clock-frequency", fdt_set_busfreq }, -#ifdef CONFIG_MPC83XX_TSEC1 +#ifdef CONFIG_TSEC1 { "/" OF_SOC "/ethernet@24000, "mac-address", fdt_set_eth0 @@ -425,7 +425,7 @@ static const struct { fdt_set_eth0 }, #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 { "/" OF_SOC "/ethernet@25000, "mac-address", fdt_set_eth1 @@ -525,7 +525,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#ifdef CONFIG_MPC83XX_TSEC1 +#ifdef CONFIG_TSEC1 p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enetaddr, 6); @@ -535,7 +535,7 @@ ft_cpu_setup(void *blob, bd_t *bd) memcpy(p, bd->bi_enetaddr, 6); #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enet1addr, 6); diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 6ee9ec96c97..496c8a5861b 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -263,7 +263,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -282,7 +282,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 7735a52ccf1..1d791c9b9b3 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -280,7 +280,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#if defined(CONFIG_MPC85XX_TSEC1) +#if defined(CONFIG_TSEC1) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p) memcpy(p, bd->bi_enetaddr, 6); diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 20c7ebc7238..77c155c5bdc 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -457,7 +457,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x0600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -475,7 +475,7 @@ Alignment: /* Program check exception */ . = 0x0700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index a33acfec4d3..9456471e84e 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -278,7 +278,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#if defined(CONFIG_MPC86XX_TSEC1) +#if defined(CONFIG_TSEC1) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enetaddr, 6); @@ -287,7 +287,7 @@ ft_cpu_setup(void *blob, bd_t *bd) memcpy(p, bd->bi_enetaddr, 6); #endif -#if defined(CONFIG_MPC86XX_TSEC2) +#if defined(CONFIG_TSEC2) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enet1addr, 6); @@ -296,7 +296,7 @@ ft_cpu_setup(void *blob, bd_t *bd) memcpy(p, bd->bi_enet1addr, 6); #endif -#if defined(CONFIG_MPC86XX_TSEC3) +#if defined(CONFIG_TSEC3) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enet2addr, 6); @@ -305,7 +305,7 @@ ft_cpu_setup(void *blob, bd_t *bd) memcpy(p, bd->bi_enet2addr, 6); #endif -#if defined(CONFIG_MPC86XX_TSEC4) +#if defined(CONFIG_TSEC4) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enet3addr, 6); diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 67c56db1a37..412745bdaea 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -116,7 +116,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -134,7 +134,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S index 33a3f6c88e2..eca4b50626d 100644 --- a/cpu/mpc8xx/start.S +++ b/cpu/mpc8xx/start.S @@ -224,7 +224,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -242,7 +242,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 8bf03e1b2f1..28379298b72 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -77,11 +77,21 @@ #include <asm/processor.h> #include <pci.h> +#ifdef CONFIG_PCI + DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) +/* + * Board-specific pci initialization + * Platform code can reimplement pci_pre_init() if needed + */ +int __pci_pre_init(struct pci_controller *hose) +{ + return 1; +} +int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init"))); -#ifdef CONFIG_PCI +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) #if defined(CONFIG_PMC405) ushort pmc405_pci_subsys_deviceid(void); @@ -191,6 +201,13 @@ void pci_405gp_init(struct pci_controller *hose) if (hose->pci_fb) pciauto_region_init(hose->pci_fb); + /* Let board change/modify hose & do initial checks */ + if (pci_pre_init (hose) == 0) { + printf("PCI: Board-specific initialization failed.\n"); + printf("PCI: Configuration aborted.\n"); + return; + } + pci_register_hose(hose); /*--------------------------------------------------------------------------+ @@ -416,14 +433,12 @@ void pci_init_board(void) #endif -#endif /* CONFIG_PCI */ - #endif /* CONFIG_405GP */ /*-----------------------------------------------------------------------------+ * CONFIG_440 *-----------------------------------------------------------------------------*/ -#if defined(CONFIG_440) && defined(CONFIG_PCI) +#if defined(CONFIG_440) static struct pci_controller ppc440_hose = {0}; @@ -496,14 +511,12 @@ void pci_440_init (struct pci_controller *hose) pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA); -#if defined(CFG_PCI_PRE_INIT) /* Let board change/modify hose & do initial checks */ if (pci_pre_init (hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); return; } -#endif pci_register_hose( hose ); @@ -575,4 +588,5 @@ void pci_init_board(void) #endif } -#endif /* CONFIG_440 & CONFIG_PCI */ +#endif /* CONFIG_440 */ +#endif /* CONFIG_PCI */ diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index c500d3f2421..8c18d0f4e21 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -70,6 +70,15 @@ #define ONE_BILLION 1000000000 +/* + * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed + */ +void __spd_ddr_init_hang (void) +{ + hang (); +} +void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))); + /*----------------------------------------------------------------------------- | Memory Controller Options 0 +-----------------------------------------------------------------------------*/ @@ -262,7 +271,7 @@ typedef struct bank_param BANKPARMS; #ifdef CFG_SIMULATE_SPD_EEPROM extern unsigned char cfg_simulate_spd_eeprom[128]; #endif -void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value); +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); static unsigned char spd_read(uchar chip, uint addr); static void get_spd_info(unsigned long *dimm_populated, @@ -373,7 +382,7 @@ long int spd_sdram(void) { #ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */ /* and program tlb entries for this size (dynamic) */ - program_tlb(0, total_size, MY_TLB_WORD2_I_ENABLE); + program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE); #endif /* @@ -467,7 +476,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); } } @@ -490,7 +499,7 @@ static void check_mem_type(unsigned long *dimm_populated, dimm_num); printf("Only DDR SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; } } @@ -510,7 +519,7 @@ static void check_volt_type(unsigned long *dimm_populated, if (voltage_type != 0x04) { printf("ERROR: DIMM %lu with unsupported voltage level.\n", dimm_num); - hang(); + spd_ddr_init_hang (); } else { debug("DIMM %lu voltage level supported.\n", dimm_num); } @@ -581,7 +590,7 @@ static void program_cfg0(unsigned long *dimm_populated, printf("WARNING: DIMM with datawidth of %lu bits.\n", data_width); printf("Only DIMMs with 32 or 64 bit datawidths supported.\n"); - hang(); + spd_ddr_init_hang (); } break; } @@ -769,7 +778,7 @@ static void program_tr0(unsigned long *dimm_populated, if ((tcyc_reg & 0x0F) >= 10) { printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n", dimm_num); - hang(); + spd_ddr_init_hang (); } cycle_time_ns_x_10[cas_index] = @@ -849,7 +858,7 @@ static void program_tr0(unsigned long *dimm_populated, printf("ERROR: No supported CAS latency with the installed DIMMs.\n"); printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range.\n"); - hang(); + spd_ddr_init_hang (); } /* @@ -1008,6 +1017,7 @@ static int short_mem_test(void) */ for (i = 0; i < NUMMEMTESTS; i++) { for (j = 0; j < NUMMEMWORDS; j++) { +//printf("bank enabled base:%x\n", &membase[j]); membase[j] = test[i][j]; ppcDcbf((unsigned long)&(membase[j])); } @@ -1160,7 +1170,7 @@ static void program_tr1(void) */ if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay.\n"); - hang(); + spd_ddr_init_hang (); } /* @@ -1310,7 +1320,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", bank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); } switch (num_col_addr) { @@ -1332,7 +1342,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); } /* @@ -1340,14 +1350,14 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, */ cr |= SDRAM_BXCR_SDBE; - for (i = 0; i < num_banks; i++) { + for (i = 0; i < num_banks; i++) { bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes = (4 << 20) * bank_size_id; bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr; debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n", dimm_num, i, ctrl_bank_num[dimm_num]+i, bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes); - } + } } } diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 48b9ee2f7e0..5fef27b984d 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -58,8 +58,8 @@ #define SDRAM_DDR2 2 #define SDRAM_NONE 0 -#define MAXDIMMS 2 -#define MAXRANKS 4 +#define MAXDIMMS 2 +#define MAXRANKS 4 #define MAXBXCF 4 #define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ @@ -129,6 +129,16 @@ #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif +/* + * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed + */ +void __spd_ddr_init_hang (void) +{ + hang (); +} +void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))); + + /* Private Structure Definitions */ /* enum only to ease code for cas latency setting */ @@ -144,7 +154,7 @@ typedef enum ddr_cas_id { * Prototypes *-----------------------------------------------------------------------------*/ static unsigned long sdram_memsize(void); -void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value); +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); static void get_spd_info(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks); @@ -528,7 +538,7 @@ long int initdram(int board_type) dram_size = sdram_memsize(); /* and program tlb entries for this size (dynamic) */ - program_tlb(0, dram_size, MY_TLB_WORD2_I_ENABLE); + program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); /*------------------------------------------------------------------ * DQS calibration. @@ -582,7 +592,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); } } @@ -629,42 +639,42 @@ static void check_mem_type(unsigned long *dimm_populated, "slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; case 2: printf("ERROR: EDO DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; case 3: printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; case 4: printf("ERROR: SDRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; case 5: printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; case 6: printf("ERROR: SGRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; case 7: debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num); @@ -679,7 +689,7 @@ static void check_mem_type(unsigned long *dimm_populated, (unsigned int)dimm_num); printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; } } @@ -689,7 +699,7 @@ static void check_mem_type(unsigned long *dimm_populated, && (dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) { printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n"); - hang(); + spd_ddr_init_hang (); } } } @@ -764,7 +774,7 @@ static void check_frequency(unsigned long *dimm_populated, (unsigned int)(calc_cycle_time*10)); printf("Replace the DIMM, or change DDR frequency via " "strapping bits.\n\n"); - hang(); + spd_ddr_init_hang (); } } } @@ -796,7 +806,7 @@ static void check_rank_number(unsigned long *dimm_populated, "slot %d is not supported.\n", dimm_rank, dimm_num); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); } else total_rank += dimm_rank; } @@ -805,7 +815,7 @@ static void check_rank_number(unsigned long *dimm_populated, "for all slots.\n", (unsigned int)total_rank); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Remove one of the DIMM modules.\n\n"); - hang(); + spd_ddr_init_hang (); } } } @@ -830,28 +840,28 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("This DIMM is 5.0 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + spd_ddr_init_hang (); break; case 0x01: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is LVTTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + spd_ddr_init_hang (); break; case 0x02: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 1.5 Volt.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + spd_ddr_init_hang (); break; case 0x03: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 3.3 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + spd_ddr_init_hang (); break; case 0x04: /* 2.5 Voltage only for DDR1 */ @@ -863,7 +873,7 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + spd_ddr_init_hang (); break; } } @@ -1006,13 +1016,13 @@ static void program_copt1(unsigned long *dimm_populated, if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) { if (buf0 != buf1) { printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n"); - hang(); + spd_ddr_init_hang (); } } if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) { printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n"); - hang(); + spd_ddr_init_hang (); } else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) { mcopt1 |= SDRAM_MCOPT1_DMWD_64; @@ -1020,7 +1030,7 @@ static void program_copt1(unsigned long *dimm_populated, mcopt1 |= SDRAM_MCOPT1_DMWD_32; } else { printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n"); - hang(); + spd_ddr_init_hang (); } if (ecc_enabled == TRUE) @@ -1209,7 +1219,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: ucode error on selected_cas value %d", selected_cas); - hang(); + spd_ddr_init_hang (); break; } @@ -1241,7 +1251,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: write recovery not support (%d)", write_recovery); - hang(); + spd_ddr_init_hang (); break; } #else @@ -1259,7 +1269,7 @@ static void program_initplr(unsigned long *dimm_populated, ods = ODS_REDUCED; } else { printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm); - hang(); + spd_ddr_init_hang (); } mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas; @@ -1284,7 +1294,7 @@ static void program_initplr(unsigned long *dimm_populated, mtsdram(SDRAM_INITPLR13, 0x80800000 | emr); /* EMR OCD Exit */ } else { printf("ERROR: ucode error as unknown DDR type in program_initplr"); - hang(); + spd_ddr_init_hang (); } } @@ -1389,7 +1399,7 @@ static void program_mode(unsigned long *dimm_populated, } else { printf("ERROR: SPD reported Tcyc is incorrect for DIMM " "in slot %d\n", (unsigned int)dimm_num); - hang(); + spd_ddr_init_hang (); } } else { /* Convert from hex to decimal */ @@ -1526,7 +1536,7 @@ static void program_mode(unsigned long *dimm_populated, printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n"); - hang(); + spd_ddr_init_hang (); } } else { /* DDR2 */ debug("cas_3_0_available=%d\n", cas_3_0_available); @@ -1549,7 +1559,7 @@ static void program_mode(unsigned long *dimm_populated, cas_3_0_available, cas_4_0_available, cas_5_0_available); printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n", sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk); - hang(); + spd_ddr_init_hang (); } } @@ -1658,7 +1668,7 @@ static void program_rtr(unsigned long *dimm_populated, printf("ERROR: DIMM %d unsupported refresh rate/type.\n", (unsigned int)dimm_num); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); break; } @@ -2066,7 +2076,7 @@ static void program_bxcf(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", (unsigned int)num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); } } @@ -2148,7 +2158,7 @@ static void program_memory_queue(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", (unsigned int)rank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + spd_ddr_init_hang (); } if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1)) @@ -2693,7 +2703,7 @@ calibration_loop: printf("\nERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); - hang(); + spd_ddr_init_hang (); } blank_string(strlen(str)); @@ -2849,7 +2859,7 @@ static void test(void) if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); - hang(); + spd_ddr_init_hang (); } /*------------------------------------------------------------------ diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk index 119e061b89e..4fd510899c5 100644 --- a/cpu/ppc4xx/config.mk +++ b/cpu/ppc4xx/config.mk @@ -22,5 +22,13 @@ # PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing +PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -msoft-float -PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -Wa,-m405 -mcpu=405 -msoft-float +cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +is440=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg)) + +ifneq (,$(findstring CONFIG_440,$(is440))) +PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440 +else +PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405 +endif diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 66e86372603..351da36e855 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -153,7 +153,7 @@ cpu_init_f (void) */ asm volatile(" bl 0f" ::: "lr"); asm volatile("0: mflr 3" ::: "r3"); - asm volatile(" addi 4, 0, 14" ::: "r4"); + asm volatile(" addi 4, 0, 14" ::: "r4"); asm volatile(" mtctr 4" ::: "ctr"); asm volatile("1: icbt 0, 3"); asm volatile(" addi 3, 3, 32" ::: "r3"); @@ -211,6 +211,8 @@ cpu_init_f (void) val = mfspr(tcr); #if defined(CONFIG_440EP) || defined(CONFIG_440GR) val |= 0xb8000000; /* generate system reset after 1.34 seconds */ +#elif defined(CONFIG_440EPX) + val |= 0xb0000000; /* generate system reset after 1.34 seconds */ #else val |= 0xf0000000; /* generate system reset after 2.684 seconds */ #endif diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c index dd84e58a1f0..5235203ea28 100644 --- a/cpu/ppc4xx/gpio.c +++ b/cpu/ppc4xx/gpio.c @@ -103,6 +103,18 @@ void gpio_write_bit(int pin, int val) out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~GPIO_VAL(pin)); } +int gpio_read_out_bit(int pin) +{ + u32 offs = 0; + + if (pin >= GPIO_MAX) { + offs = 0x100; + pin -= GPIO_MAX; + } + + return (in32(GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0); +} + #if defined(CFG_440_GPIO_TABLE) void gpio_set_chip_configuration(void) { @@ -157,12 +169,38 @@ void gpio_set_chip_configuration(void) switch (gpio_tab[gpio_core][i].alt_nb) { case GPIO_SEL: if (gpio_core == GPIO0) { - reg = in32(GPIO0_TCR) | (0x80000000 >> (j)); + /* + * Setup output value + * 1 -> high level + * 0 -> low level + * else -> don't touch + */ + reg = in32(GPIO0_OR); + if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) + reg |= (0x80000000 >> (i)); + else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0) + reg &= ~(0x80000000 >> (i)); + out32(GPIO0_OR, reg); + + reg = in32(GPIO0_TCR) | (0x80000000 >> (i)); out32(GPIO0_TCR, reg); } if (gpio_core == GPIO1) { - reg = in32(GPIO1_TCR) | (0x80000000 >> (j)); + /* + * Setup output value + * 1 -> high level + * 0 -> low level + * else -> don't touch + */ + reg = in32(GPIO0_OR); + if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) + reg |= (0x80000000 >> (i)); + else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0) + reg &= ~(0x80000000 >> (i)); + out32(GPIO0_OR, reg); + + reg = in32(GPIO1_TCR) | (0x80000000 >> (i)); out32(GPIO1_TCR, reg); } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 78d0042cc76..8ecaaea4d9a 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -22,26 +22,27 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -/*------------------------------------------------------------------------------+ */ -/* */ -/* This source code has been made available to you by IBM on an AS-IS */ -/* basis. Anyone receiving this source is licensed under IBM */ -/* copyrights to use it in any way he or she deems fit, including */ -/* copying it, modifying it, compiling it, and redistributing it either */ -/* with or without modifications. No license under IBM patents or */ -/* patent applications is to be implied by the copyright license. */ -/* */ -/* Any user of this software should understand that IBM cannot provide */ -/* technical support for this software and will not be responsible for */ -/* any consequences resulting from the use of this software. */ -/* */ -/* Any person who transfers this source code or any derivative work */ -/* must include the IBM copyright notice, this paragraph, and the */ -/* preceding two paragraphs in the transferred software. */ -/* */ -/* COPYRIGHT I B M CORPORATION 1995 */ -/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ -/*------------------------------------------------------------------------------- */ +/*------------------------------------------------------------------------------+ + * + * This source code has been made available to you by IBM on an AS-IS + * basis. Anyone receiving this source is licensed under IBM + * copyrights to use it in any way he or she deems fit, including + * copying it, modifying it, compiling it, and redistributing it either + * with or without modifications. No license under IBM patents or + * patent applications is to be implied by the copyright license. + * + * Any user of this software should understand that IBM cannot provide + * technical support for this software and will not be responsible for + * any consequences resulting from the use of this software. + * + * Any person who transfers this source code or any derivative work + * must include the IBM copyright notice, this paragraph, and the + * preceding two paragraphs in the transferred software. + * + * COPYRIGHT I B M CORPORATION 1995 + * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + *------------------------------------------------------------------------------- + */ /* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards * @@ -59,7 +60,6 @@ * address and (s)dram will be positioned at address 0 */ #include <config.h> -#include <mpc8xx.h> #include <ppc4xx.h> #include <version.h> @@ -110,11 +110,11 @@ # endif #endif /* CFG_INIT_DCACHE_CS */ -#define function_prolog(func_name) .text; \ +#define function_prolog(func_name) .text; \ .align 2; \ .globl func_name; \ func_name: -#define function_epilog(func_name) .type func_name,@function; \ +#define function_epilog(func_name) .type func_name,@function; \ .size func_name,.-func_name /* We don't want the MMU yet. @@ -294,11 +294,13 @@ skip_debug_init: mtspr ivor7,r1 /* Floating point unavailable */ li r1,0x0c00 mtspr ivor8,r1 /* System call */ - li r1,0x1000 - mtspr ivor10,r1 /* Decrementer (PIT for 440) */ - li r1,0x1400 - mtspr ivor13,r1 /* Data TLB error */ + li r1,0x0a00 + mtspr ivor9,r1 /* Auxiliary Processor unavailable */ + li r1,0x0900 + mtspr ivor10,r1 /* Decrementer */ li r1,0x1300 + mtspr ivor13,r1 /* Data TLB error */ + li r1,0x1400 mtspr ivor14,r1 /* Instr TLB error */ li r1,0x2000 mtspr ivor15,r1 /* Debug */ @@ -503,11 +505,81 @@ version_string: .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" -/* - * Maybe this should be moved somewhere else because the current - * location (0x100) is where the CriticalInput Execption should be. - */ . = EXC_OFF_SYS_RESET + .globl _start_of_vectors +_start_of_vectors: + +/* Critical input. */ + CRIT_EXCEPTION(0x100, CritcalInput, UnknownException) + +#ifdef CONFIG_440 +/* Machine check */ + MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException) +#else + CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException) +#endif /* CONFIG_440 */ + +/* Data Storage exception. */ + STD_EXCEPTION(0x300, DataStorage, UnknownException) + +/* Instruction Storage exception. */ + STD_EXCEPTION(0x400, InstStorage, UnknownException) + +/* External Interrupt exception. */ + STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) + +/* Alignment exception. */ + . = 0x600 +Alignment: + EXCEPTION_PROLOG(SRR0, SRR1) + mfspr r4,DAR + stw r4,_DAR(r21) + mfspr r5,DSISR + stw r5,_DSISR(r21) + addi r3,r1,STACK_FRAME_OVERHEAD + li r20,MSR_KERNEL + rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ + lwz r6,GOT(transfer_to_handler) + mtlr r6 + blrl +.L_Alignment: + .long AlignmentException - _start + _START_OFFSET + .long int_return - _start + _START_OFFSET + +/* Program check exception */ + . = 0x700 +ProgramCheck: + EXCEPTION_PROLOG(SRR0, SRR1) + addi r3,r1,STACK_FRAME_OVERHEAD + li r20,MSR_KERNEL + rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ + lwz r6,GOT(transfer_to_handler) + mtlr r6 + blrl +.L_ProgramCheck: + .long ProgramCheckException - _start + _START_OFFSET + .long int_return - _start + _START_OFFSET + +#ifdef CONFIG_440 + STD_EXCEPTION(0x800, FPUnavailable, UnknownException) + STD_EXCEPTION(0x900, Decrementer, DecrementerPITException) + STD_EXCEPTION(0xa00, APU, UnknownException) +#endif + STD_EXCEPTION(0xc00, SystemCall, UnknownException) + +#ifdef CONFIG_440 + STD_EXCEPTION(0x1300, DataTLBError, UnknownException) + STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException) +#else + STD_EXCEPTION(0x1000, PIT, DecrementerPITException) + STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) + STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) +#endif + CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException ) + + .globl _end_of_vectors +_end_of_vectors: + . = _START_OFFSET #endif .globl _start _start: @@ -817,21 +889,21 @@ _start: */ lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CFG_OCM_DATA_ADDR@l - ori r3,r3,0x8270 /* 32K Offset, 16K for Bank 1, R/W/Enable */ + ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ mtdcr ocmplb3cr1,r3 /* Set PLB Access */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ mtdcr ocmplb3cr2,r3 /* Set PLB Access */ isync - lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ + lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CFG_OCM_DATA_ADDR@l - ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ - mtdcr ocmdscr1, r3 /* Set Data Side */ - mtdcr ocmiscr1, r3 /* Set Instruction Side */ + ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ + mtdcr ocmdscr1, r3 /* Set Data Side */ + mtdcr ocmiscr1, r3 /* Set Instruction Side */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ - mtdcr ocmdscr2, r3 /* Set Data Side */ - mtdcr ocmiscr2, r3 /* Set Instruction Side */ - addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */ + mtdcr ocmdscr2, r3 /* Set Data Side */ + mtdcr ocmiscr2, r3 /* Set Instruction Side */ + addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */ mtdcr ocmdsisdpc,r3 isync @@ -850,7 +922,7 @@ _start: mtdcr ocmdscntl, r4 /* set data-side IRAM config */ isync - lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ + lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CFG_OCM_DATA_ADDR@l mtdcr ocmdsarc, r3 addis r4, 0, 0xC000 /* OCM data area enabled */ @@ -1017,107 +1089,6 @@ start_ram: #ifndef CONFIG_NAND_SPL -/*****************************************************************************/ - .globl _start_of_vectors -_start_of_vectors: - -#if 0 -/*TODO Fixup _start above so we can do this*/ -/* Critical input. */ - CRIT_EXCEPTION(0x100, CritcalInput, CritcalInputException) -#endif - -/* Machine check */ - CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - li r20,MSR_KERNEL - rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ - lwz r6,GOT(transfer_to_handler) - mtlr r6 - blrl -.L_Alignment: - .long AlignmentException - _start + EXC_OFF_SYS_RESET - .long int_return - _start + EXC_OFF_SYS_RESET - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - li r20,MSR_KERNEL - rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ - lwz r6,GOT(transfer_to_handler) - mtlr r6 - blrl -.L_ProgramCheck: - .long ProgramCheckException - _start + EXC_OFF_SYS_RESET - .long int_return - _start + EXC_OFF_SYS_RESET - - /* No FPU on MPC8xx. This exception is not supposed to happen. - */ - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - - /* I guess we could implement decrementer, and may have - * to someday for timekeeping. - */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - STD_EXCEPTION(0xa00, Trap_0a, UnknownException) - STD_EXCEPTION(0xb00, Trap_0b, UnknownException) - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - STD_EXCEPTION(0xd00, SingleStep, UnknownException) - - STD_EXCEPTION(0xe00, Trap_0e, UnknownException) - STD_EXCEPTION(0xf00, Trap_0f, UnknownException) - - /* On the MPC8xx, this is a software emulation interrupt. It occurs - * for all unimplemented and illegal instructions. - */ - STD_EXCEPTION(0x1000, PIT, PITException) - - STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) - STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) - STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException) - STD_EXCEPTION(0x1400, DataTLBError, UnknownException) - - STD_EXCEPTION(0x1500, Reserved5, UnknownException) - STD_EXCEPTION(0x1600, Reserved6, UnknownException) - STD_EXCEPTION(0x1700, Reserved7, UnknownException) - STD_EXCEPTION(0x1800, Reserved8, UnknownException) - STD_EXCEPTION(0x1900, Reserved9, UnknownException) - STD_EXCEPTION(0x1a00, ReservedA, UnknownException) - STD_EXCEPTION(0x1b00, ReservedB, UnknownException) - - STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException) - STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException) - STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException) - STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException) - - CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException ) - - .globl _end_of_vectors -_end_of_vectors: - - - . = 0x2100 - /* * This code finishes saving the registers to the exception frame * and jumps to the appropriate handler for the exception. @@ -1133,28 +1104,12 @@ transfer_to_handler: SAVE_4GPRS(8, r21) SAVE_8GPRS(12, r21) SAVE_8GPRS(24, r21) -#if 0 - andi. r23,r23,MSR_PR - mfspr r23,SPRG3 /* if from user, fix up tss.regs */ - beq 2f - addi r24,r1,STACK_FRAME_OVERHEAD - stw r24,PT_REGS(r23) -2: addi r2,r23,-TSS /* set r2 to current */ - tovirt(r2,r2,r23) -#endif mflr r23 andi. r24,r23,0x3f00 /* get vector offset */ stw r24,TRAP(r21) li r22,0 stw r22,RESULT(r21) mtspr SPRG2,r22 /* r1 is now kernel sp */ -#if 0 - addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */ - cmplw 0,r1,r2 - cmplw 1,r1,r24 - crand 1,1,4 - bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */ -#endif lwz r24,0(r23) /* virtual address of handler */ lwz r23,4(r23) /* where to go when done */ mtspr SRR0,r24 @@ -1215,16 +1170,72 @@ crit_return: REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) - mtspr 990,r2 /* SRR2 */ - mtspr 991,r0 /* SRR3 */ + mtspr csrr0,r2 + mtspr csrr1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) SYNC rfci -/* Cache functions. -*/ +#ifdef CONFIG_440 +mck_return: + mfmsr r28 /* Disable interrupts */ + li r4,0 + ori r4,r4,MSR_EE + andc r28,r28,r4 + SYNC /* Some chip revs need this... */ + mtmsr r28 + SYNC + lwz r2,_CTR(r1) + lwz r0,_LINK(r1) + mtctr r2 + mtlr r0 + lwz r2,_XER(r1) + lwz r0,_CCR(r1) + mtspr XER,r2 + mtcrf 0xFF,r0 + REST_10GPRS(3, r1) + REST_10GPRS(13, r1) + REST_8GPRS(23, r1) + REST_GPR(31, r1) + lwz r2,_NIP(r1) /* Restore environment */ + lwz r0,_MSR(r1) + mtspr mcsrr0,r2 + mtspr mcsrr1,r0 + lwz r0,GPR0(r1) + lwz r2,GPR2(r1) + lwz r1,GPR1(r1) + SYNC + rfmci +#endif /* CONFIG_440 */ + + +/* + * Cache functions. + * + * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM, + * although for some cache-ralated calls stubs have to be provided to satisfy + * symbols resolution. + * Icache-related functions are used in POST framework. + * + */ +#ifdef CONFIG_440 + .globl dcache_disable + .globl icache_disable + .globl icache_enable +dcache_disable: +icache_disable: +icache_enable: + blr + + .globl dcache_status + .globl icache_status +dcache_status: +icache_status: + mr r3, 0 + blr +#else flush_dcache: addis r9,r0,0x0002 /* set mask for EE and CE msr bits */ ori r9,r9,0x8000 @@ -1303,24 +1314,13 @@ dcache_status: mfdccr r3 srwi r3, r3, 31 /* >>31 => select bit 0 */ blr +#endif .globl get_pvr get_pvr: mfspr r3, PVR blr -#if !defined(CONFIG_440) - .globl wr_pit -wr_pit: - mtspr pit, r3 - blr -#endif - - .globl wr_tcr -wr_tcr: - mtspr tcr, r3 - blr - /*------------------------------------------------------------------------------- */ /* Function: out16 */ /* Description: Output 16 bits */ @@ -1518,7 +1518,7 @@ relocate_code: * initialization, now running from RAM. */ - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET + addi r0, r10, in_ram - _start + _START_OFFSET mtlr r0 blr /* NEVER RETURNS! */ @@ -1588,7 +1588,7 @@ clear_bss: */ .globl trap_init trap_init: - lwz r7, GOT(_start) + lwz r7, GOT(_start_of_vectors) lwz r8, GOT(_end_of_vectors) li r9, 0x100 /* reset vector always at 0x100 */ @@ -1608,35 +1608,48 @@ trap_init: /* * relocate `hdlr' and `int_return' entries */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET + li r7, .L_MachineCheck - _start + _START_OFFSET + li r8, Alignment - _start + _START_OFFSET 2: bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ + addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 2b - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET + li r7, .L_Alignment - _start + _START_OFFSET bl trap_reloc - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET + li r7, .L_ProgramCheck - _start + _START_OFFSET bl trap_reloc - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: +#ifdef CONFIG_440 + li r7, .L_FPUnavailable - _start + _START_OFFSET bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: + li r7, .L_Decrementer - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_APU - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_InstructionTLBError - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_DataTLBError - _start + _START_OFFSET + bl trap_reloc +#else /* CONFIG_440 */ + li r7, .L_PIT - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_InstructionTLBMiss - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_DataTLBMiss - _start + _START_OFFSET + bl trap_reloc +#endif /* CONFIG_440 */ + + li r7, .L_DebugBreakpoint - _start + _START_OFFSET bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b #if !defined(CONFIG_440) addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */ @@ -1679,13 +1692,13 @@ trap_reloc: +----------------------------------------------------------------------------*/ function_prolog(dcbz_area) rlwinm. r5,r4,0,27,31 - rlwinm r5,r4,27,5,31 - beq ..d_ra2 - addi r5,r5,0x0001 -..d_ra2:mtctr r5 -..d_ag2:dcbz r0,r3 - addi r3,r3,32 - bdnz ..d_ag2 + rlwinm r5,r4,27,5,31 + beq ..d_ra2 + addi r5,r5,0x0001 +..d_ra2:mtctr r5 +..d_ag2:dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag2 sync blr function_epilog(dcbz_area) @@ -1694,26 +1707,26 @@ trap_reloc: | dflush. Assume 32K at vector address is cachable. +----------------------------------------------------------------------------*/ function_prolog(dflush) - mfmsr r9 - rlwinm r8,r9,0,15,13 - rlwinm r8,r8,0,17,15 - mtmsr r8 - addi r3,r0,0x0000 - mtspr dvlim,r3 - mfspr r3,ivpr - addi r4,r0,1024 - mtctr r4 + mfmsr r9 + rlwinm r8,r9,0,15,13 + rlwinm r8,r8,0,17,15 + mtmsr r8 + addi r3,r0,0x0000 + mtspr dvlim,r3 + mfspr r3,ivpr + addi r4,r0,1024 + mtctr r4 ..dflush_loop: - lwz r6,0x0(r3) - addi r3,r3,32 - bdnz ..dflush_loop - addi r3,r3,-32 - mtctr r4 -..ag: dcbf r0,r3 - addi r3,r3,-32 - bdnz ..ag + lwz r6,0x0(r3) + addi r3,r3,32 + bdnz ..dflush_loop + addi r3,r3,-32 + mtctr r4 +..ag: dcbf r0,r3 + addi r3,r3,-32 + bdnz ..ag sync - mtmsr r9 + mtmsr r9 blr function_epilog(dflush) #endif /* CONFIG_440 */ diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c index 50344a491c1..049a7854950 100644 --- a/cpu/ppc4xx/tlb.c +++ b/cpu/ppc4xx/tlb.c @@ -36,7 +36,8 @@ typedef struct region { unsigned long tlb_word2_i_value; } region_t; -static int add_tlb_entry(unsigned long base_addr, +static int add_tlb_entry(unsigned long phys_addr, + unsigned long virt_addr, unsigned long tlb_word0_size_value, unsigned long tlb_word2_i_value) { @@ -55,9 +56,9 @@ static int add_tlb_entry(unsigned long base_addr, return -1; /* Second, create the TLB entry */ - tlb_word0_value = TLB_WORD0_EPN_ENCODE(base_addr) | TLB_WORD0_V_ENABLE | + tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE | TLB_WORD0_TS_0 | tlb_word0_size_value; - tlb_word1_value = TLB_WORD1_RPN_ENCODE(base_addr) | TLB_WORD1_ERPN_ENCODE(0); + tlb_word1_value = TLB_WORD1_RPN_ENCODE(phys_addr) | TLB_WORD1_ERPN_ENCODE(0); tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE | TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE | TLB_WORD2_W_DISABLE | tlb_word2_i_value | @@ -81,7 +82,9 @@ static int add_tlb_entry(unsigned long base_addr, return 0; } -static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, +static void program_tlb_addr(unsigned long phys_addr, + unsigned long virt_addr, + unsigned long mem_size, unsigned long tlb_word2_i_value) { int rc; @@ -91,70 +94,86 @@ static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, while (mem_size != 0) { rc = 0; /* Add the TLB entries in to map the region. */ - if (((base_addr & TLB_256MB_ALIGN_MASK) == base_addr) && + if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_256MB_SIZE)) { /* Add a 256MB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256MB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_256MB, tlb_i)) == 0) { mem_size -= TLB_256MB_SIZE; - base_addr += TLB_256MB_SIZE; + phys_addr += TLB_256MB_SIZE; + virt_addr += TLB_256MB_SIZE; } - } else if (((base_addr & TLB_16MB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_16MB_SIZE)) { /* Add a 16MB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16MB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_16MB, tlb_i)) == 0) { mem_size -= TLB_16MB_SIZE; - base_addr += TLB_16MB_SIZE; + phys_addr += TLB_16MB_SIZE; + virt_addr += TLB_16MB_SIZE; } - } else if (((base_addr & TLB_1MB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_1MB_SIZE)) { /* Add a 1MB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1MB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_1MB, tlb_i)) == 0) { mem_size -= TLB_1MB_SIZE; - base_addr += TLB_1MB_SIZE; + phys_addr += TLB_1MB_SIZE; + virt_addr += TLB_1MB_SIZE; } - } else if (((base_addr & TLB_256KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_256KB_SIZE)) { /* Add a 256KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_256KB, tlb_i)) == 0) { mem_size -= TLB_256KB_SIZE; - base_addr += TLB_256KB_SIZE; + phys_addr += TLB_256KB_SIZE; + virt_addr += TLB_256KB_SIZE; } - } else if (((base_addr & TLB_64KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_64KB_SIZE)) { /* Add a 64KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_64KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_64KB, tlb_i)) == 0) { mem_size -= TLB_64KB_SIZE; - base_addr += TLB_64KB_SIZE; + phys_addr += TLB_64KB_SIZE; + virt_addr += TLB_64KB_SIZE; } - } else if (((base_addr & TLB_16KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_16KB_SIZE)) { /* Add a 16KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_16KB, tlb_i)) == 0) { mem_size -= TLB_16KB_SIZE; - base_addr += TLB_16KB_SIZE; + phys_addr += TLB_16KB_SIZE; + virt_addr += TLB_16KB_SIZE; } - } else if (((base_addr & TLB_4KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_4KB_SIZE)) { /* Add a 4KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_4KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_4KB, tlb_i)) == 0) { mem_size -= TLB_4KB_SIZE; - base_addr += TLB_4KB_SIZE; + phys_addr += TLB_4KB_SIZE; + virt_addr += TLB_4KB_SIZE; } - } else if (((base_addr & TLB_1KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_1KB_SIZE)) { /* Add a 1KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_1KB, tlb_i)) == 0) { mem_size -= TLB_1KB_SIZE; - base_addr += TLB_1KB_SIZE; + phys_addr += TLB_1KB_SIZE; + virt_addr += TLB_1KB_SIZE; } } else { printf("ERROR: no TLB size exists for the base address 0x%0X.\n", - base_addr); + phys_addr); } if (rc != 0) printf("ERROR: no TLB entries available for the base addr 0x%0X.\n", - base_addr); + phys_addr); } return; @@ -166,16 +185,16 @@ static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, * Common usage for boards with SDRAM DIMM modules to dynamically * configure the TLB's for the SDRAM */ -void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value) +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value) { region_t region_array; - region_array.base = start; + region_array.base = phys_addr; region_array.size = size; region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */ /* Call the routine to add in the tlb entries for the memory regions */ - program_tlb_addr(region_array.base, region_array.size, + program_tlb_addr(region_array.base, virt_addr, region_array.size, region_array.tlb_word2_i_value); return; diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c index 6aecca2db90..eb9420e57a8 100644..100755 --- a/cpu/ppc4xx/traps.c +++ b/cpu/ppc4xx/traps.c @@ -36,6 +36,8 @@ #include <command.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) int (*debugger_exception_handler)(struct pt_regs *) = 0; #endif @@ -45,8 +47,7 @@ extern unsigned long search_exception_table(unsigned long); /* THIS NEEDS CHANGING to use the board info structure. */ -#define END_OF_MEM 0x00400000 - +#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize) static __inline__ void set_tsr(unsigned long val) { @@ -110,7 +111,7 @@ void show_regs(struct pt_regs * regs) { int i; - printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n", regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, @@ -120,14 +121,12 @@ void show_regs(struct pt_regs * regs) printf("\n"); for (i = 0; i < 32; i++) { - if ((i % 8) == 0) - { + if ((i % 8) == 0) { printf("GPR%02d: ", i); } printf("%08lX ", regs->gpr[i]); - if ((i % 8) == 7) - { + if ((i % 8) == 7) { printf("\n"); } } @@ -139,13 +138,16 @@ _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); - panic("Exception in kernel pc %lx signal %d",regs->nip,signr); + panic("Exception"); } void MachineCheckException(struct pt_regs *regs) { - unsigned long fixup; + unsigned long fixup, val; +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + u32 value2; +#endif /* Probing PCI using config cycles cause this exception * when a device is not present. Catch it and return to @@ -161,26 +163,132 @@ MachineCheckException(struct pt_regs *regs) return; #endif - printf("Machine check in kernel mode.\n"); + printf("Machine Check Exception.\n"); printf("Caused by (from msr): "); - printf("regs %p ",regs); - switch( regs->msr & 0x000F0000) { - case (0x80000000>>12): - printf("Machine check signal - probably due to mm fault\n" - "with mmu off\n"); + printf("regs %p ", regs); + + val = get_esr(); + +#if !defined(CONFIG_440) + if (val& ESR_IMCP) { + printf("Instruction"); + mtspr(ESR, val & ~ESR_IMCP); + } else { + printf("Data"); + } + printf(" machine check.\n"); + +#elif defined(CONFIG_440) + if (val& ESR_IMCP){ + printf("Instruction Synchronous Machine Check exception\n"); + mtspr(SPRN_ESR, val & ~ESR_IMCP); + } else { + val = mfspr(MCSR); + if (val & MCSR_IB) + printf("Instruction Read PLB Error\n"); + if (val & MCSR_DRB) + printf("Data Read PLB Error\n"); + if (val & MCSR_DWB) + printf("Data Write PLB Error\n"); + if (val & MCSR_TLBP) + printf("TLB Parity Error\n"); + if (val & MCSR_ICP){ + /*flush_instruction_cache(); */ + printf("I-Cache Parity Error\n"); + } + if (val & MCSR_DCSP) + printf("D-Cache Search Parity Error\n"); + if (val & MCSR_DCFP) + printf("D-Cache Flush Parity Error\n"); + if (val & MCSR_IMPE) + printf("Machine Check exception is imprecise\n"); + + /* Clear MCSR */ + mtspr(SPRN_MCSR, val); + } +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + mfsdram(DDR0_00, val) ; + printf("DDR0: DDR0_00 %p\n", val); + val = (val >> 16) & 0xff; + if (val & 0x80) + printf("DDR0: At least one interrupt active\n"); + if (val & 0x40) + printf("DDR0: DRAM initialization complete.\n"); + if (val & 0x20) + printf("DDR0: Multiple uncorrectable ECC events.\n"); + if (val & 0x10) + printf("DDR0: Single uncorrectable ECC event.\n"); + if (val & 0x08) + printf("DDR0: Multiple correctable ECC events.\n"); + if (val & 0x04) + printf("DDR0: Single correctable ECC event.\n"); + if (val & 0x02) + printf("Multiple accesses outside the defined" + " physical memory space detected\n"); + if (val & 0x01) + printf("DDR0: Single access outside the defined" + " physical memory space detected.\n"); + + mfsdram(DDR0_01, val); + val = (val >> 8) & 0x7; + switch (val ) { + case 0: + printf("DDR0: Write Out-of-Range command\n"); + break; + case 1: + printf("DDR0: Read Out-of-Range command\n"); break; - case (0x80000000>>13): - printf("Transfer error ack signal\n"); + case 2: + printf("DDR0: Masked write Out-of-Range command\n"); break; - case (0x80000000>>14): - printf("Data parity signal\n"); + case 4: + printf("DDR0: Wrap write Out-of-Range command\n"); break; - case (0x80000000>>15): - printf("Address parity signal\n"); + case 5: + printf("DDR0: Wrap read Out-of-Range command\n"); break; default: - printf("Unknown values in msr\n"); + mfsdram(DDR0_01, value2); + printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2); } + mfsdram(DDR0_23, val); + if ( (val >> 16) & 0xff) + printf("DDR0: Syndrome for correctable ECC event 0x%x\n", + (val >> 16) & 0xff); + mfsdram(DDR0_23, val); + if ( (val >> 8) & 0xff) + printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n", + (val >> 8) & 0xff); + mfsdram(DDR0_33, val); + if (val) + printf("DDR0: Address of command that caused an " + "Out-of-Range interrupt %p\n", val); + mfsdram(DDR0_34, val); + if (val) + printf("DDR0: Address of uncorrectable ECC event %p\n", val); + mfsdram(DDR0_35, val); + if (val) + printf("DDR0: Address of uncorrectable ECC event %p\n", val); + mfsdram(DDR0_36, val); + if (val) + printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val); + mfsdram(DDR0_37, val); + if (val) + printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val); + mfsdram(DDR0_38, val); + if (val) + printf("DDR0: Address of correctable ECC event %p\n", val); + mfsdram(DDR0_39, val); + if (val) + printf("DDR0: Address of correctable ECC event %p\n", val); + mfsdram(DDR0_40, val); + if (val) + printf("DDR0: Data of correctable ECC event 0x%08x\n", val); + mfsdram(DDR0_41, val); + if (val) + printf("DDR0: Data of correctable ECC event 0x%08x\n", val); +#endif /* CONFIG_440EPX */ +#endif /* CONFIG_440 */ show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("machine check"); @@ -224,7 +332,7 @@ ProgramCheckException(struct pt_regs *regs) } void -PITException(struct pt_regs *regs) +DecrementerPITException(struct pt_regs *regs) { /* * Reset PIT interrupt @@ -272,17 +380,17 @@ addr_probe(uint *addr) __asm__ __volatile__( \ "1: lwz %0,0(%1)\n" \ - " eieio\n" \ - " li %0,0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r" (retval) : "r"(addr)); + " eieio\n" \ + " li %0,0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (retval) : "r"(addr)); return (retval); #endif diff --git a/disk/part.c b/disk/part.c index 255b1406982..6ab5857073c 100755 --- a/disk/part.c +++ b/disk/part.c @@ -180,7 +180,6 @@ void dev_print (block_dev_desc_t *dev_desc) (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ (CONFIG_COMMANDS & CFG_CMD_USB) || \ defined(CONFIG_MMC) || \ - (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \ defined(CONFIG_SYSTEMACE) ) #if defined(CONFIG_MAC_PARTITION) || \ @@ -223,7 +222,7 @@ void init_part (block_dev_desc_t * dev_desc) int get_partition_info (block_dev_desc_t *dev_desc, int part , disk_partition_t *info) { - switch (dev_desc->part_type) { + switch (dev_desc->part_type) { #ifdef CONFIG_MAC_PARTITION case PART_TYPE_MAC: if (get_partition_info_mac(dev_desc,part,info) == 0) { diff --git a/doc/README.ppc440 b/doc/README.ppc440 index 08f34f589fa..2e04abacc8c 100644 --- a/doc/README.ppc440 +++ b/doc/README.ppc440 @@ -146,12 +146,13 @@ that maps in a single PCI I/O space and PCI memory space. The I/O space begins at PCI I/O address 0 and the PCI memory space is 256 MB starting at PCI address CFG_PCI_TARGBASE. After the pci_controller structure is initialized, the cpu-specific code will -call the routine pci_pre_init() if the CFG_PCI_PRE_INIT flag is -defined. This routine is implemented by board-specific code & is where -the board can over-ride/extend the default pci_controller structure -settings and do other pre-initialization tasks. If pci_pre_init() -returns a value of zero, PCI initialization is aborted; otherwise the -controller structure is registered and initialization continues. +call the routine pci_pre_init(). This routine is implemented by +board-specific code & is where the board can over-ride/extend the +default pci_controller structure settings and exspecially provide +a routine to map the PCI interrupts and do other pre-initialization +tasks. If pci_pre_init() returns a value of zero, PCI initialization +is aborted; otherwise the controller structure is registered and +initialization continues. The default 440GP PCI target configuration is minimal -- it assumes that the strapping registers are set as necessary. Since the strapping bits diff --git a/drivers/Makefile b/drivers/Makefile index c7fcc3f23e5..48fd4eaade0 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libdrivers.a -COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ +COBJS = 3c589.o 5701rls.o ali512x.o ata_piix.o atmel_usart.o \ bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ e1000.o eepro100.o enc28j60.o \ diff --git a/drivers/ata_piix.c b/drivers/ata_piix.c new file mode 100644 index 00000000000..42456d7be33 --- /dev/null +++ b/drivers/ata_piix.c @@ -0,0 +1,216 @@ +/* + * Copyright (C) Procsys. All rights reserved. + * Author: Mushtaq Khan <mushtaq_k@procsys.com> + * <mushtaqk_921@yahoo.co.in> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * with the reference to ata_piix driver in kernel 2.4.32 + */ + +/* + * This file contains SATA controller and SATA drive initialization functions + */ + +#include <common.h> +#include <pci.h> +#include <command.h> +#include <config.h> +#include <asm/byteorder.h> +#include <ide.h> +#include <ata.h> + +#ifdef CFG_ATA_PIIX /*ata_piix driver */ + +#define DEBUG_SATA 0 /*For debug prints set DEBUG_SATA to 1 */ + +#define DRV_DECL /*For file specific declarations */ +#include <sata.h> +#undef DRV_DECL + +/*Macros realted to PCI*/ +#define PCI_SATA_BUS 0x00 +#define PCI_SATA_DEV 0x1f +#define PCI_SATA_FUNC 0x02 + +#define PCI_SATA_BASE1 0x10 +#define PCI_SATA_BASE2 0x14 +#define PCI_SATA_BASE3 0x18 +#define PCI_SATA_BASE4 0x1c +#define PCI_SATA_BASE5 0x20 +#define PCI_PMR 0x90 +#define PCI_PI 0x09 +#define PCI_PCS 0x92 +#define PCI_DMA_CTL 0x48 + +#define PORT_PRESENT (1<<0) +#define PORT_ENABLED (1<<4) + +u32 bdf; +u32 iobase1 = 0; /*Primary cmd block */ +u32 iobase2 = 0; /*Primary ctl block */ +u32 iobase3 = 0; /*Sec cmd block */ +u32 iobase4 = 0; /*sec ctl block */ +u32 iobase5 = 0; /*BMDMA*/ +int +pci_sata_init (void) +{ + u32 bus = PCI_SATA_BUS; + u32 dev = PCI_SATA_DEV; + u32 fun = PCI_SATA_FUNC; + u16 cmd = 0; + u8 lat = 0, pcibios_max_latency = 0xff; + u8 pmr; /*Port mapping reg */ + u8 pi; /*Prgming Interface reg */ + + bdf = PCI_BDF (bus, dev, fun); + pci_read_config_dword (bdf, PCI_SATA_BASE1, &iobase1); + pci_read_config_dword (bdf, PCI_SATA_BASE2, &iobase2); + pci_read_config_dword (bdf, PCI_SATA_BASE3, &iobase3); + pci_read_config_dword (bdf, PCI_SATA_BASE4, &iobase4); + pci_read_config_dword (bdf, PCI_SATA_BASE5, &iobase5); + + if ((iobase1 == 0xFFFFFFFF) || (iobase2 == 0xFFFFFFFF) || + (iobase3 == 0xFFFFFFFF) || (iobase4 == 0xFFFFFFFF) || + (iobase5 == 0xFFFFFFFF)) { + printf ("error no base addr for SATA controller\n"); + return 1; + /*ERROR*/} + + iobase1 &= 0xFFFFFFFE; + iobase2 &= 0xFFFFFFFE; + iobase3 &= 0xFFFFFFFE; + iobase4 &= 0xFFFFFFFE; + iobase5 &= 0xFFFFFFFE; + + /*check for mode */ + pci_read_config_byte (bdf, PCI_PMR, &pmr); + if (pmr > 1) { + printf ("combined mode not supported\n"); + return 1; + } + + pci_read_config_byte (bdf, PCI_PI, &pi); + if ((pi & 0x05) != 0x05) { + printf ("Sata is in Legacy mode\n"); + return 1; + } else { + printf ("sata is in Native mode\n"); + } + + /*MASTER CFG AND IO CFG */ + pci_read_config_word (bdf, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; + pci_write_config_word (bdf, PCI_COMMAND, cmd); + pci_read_config_byte (dev, PCI_LATENCY_TIMER, &lat); + + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + pci_write_config_byte (dev, PCI_LATENCY_TIMER, lat); + + return 0; +} + +int +sata_bus_probe (int port_no) +{ + int orig_mask, mask; + u16 pcs; + + mask = (PORT_PRESENT << port_no); + pci_read_config_word (bdf, PCI_PCS, &pcs); + orig_mask = (int) pcs & 0xff; + if ((orig_mask & mask) != mask) + return 0; + else + return 1; +} + +int +init_sata (void) +{ + u8 i, rv = 0; + + for (i = 0; i < CFG_SATA_MAXDEVICES; i++) { + sata_dev_desc[i].type = DEV_TYPE_UNKNOWN; + sata_dev_desc[i].if_type = IF_TYPE_IDE; + sata_dev_desc[i].dev = i; + sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN; + sata_dev_desc[i].blksz = 0; + sata_dev_desc[i].lba = 0; + sata_dev_desc[i].block_read = sata_read; + } + + rv = pci_sata_init (); + if (rv == 1) { + printf ("pci initialization failed\n"); + return 1; + } + + port[0].port_no = 0; + port[0].ioaddr.cmd_addr = iobase1; + port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr = + iobase2 | ATA_PCI_CTL_OFS; + port[0].ioaddr.bmdma_addr = iobase5; + + port[1].port_no = 1; + port[1].ioaddr.cmd_addr = iobase3; + port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr = + iobase4 | ATA_PCI_CTL_OFS; + port[1].ioaddr.bmdma_addr = iobase5 + 0x8; + + for (i = 0; i < CFG_SATA_MAXBUS; i++) + sata_port (&port[i].ioaddr); + + for (i = 0; i < CFG_SATA_MAXBUS; i++) { + if (!(sata_bus_probe (i))) { + port[i].port_state = 0; + printf ("SATA#%d port is not present \n", i); + } else { + printf ("SATA#%d port is present\n", i); + if (sata_bus_softreset (i)) { + port[i].port_state = 0; + } else { + port[i].port_state = 1; + } + } + } + + for (i = 0; i < CFG_SATA_MAXBUS; i++) { + u8 j, devno; + + if (port[i].port_state == 0) + continue; + for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) { + sata_identify (i, j); + set_Feature_cmd (i, j); + devno = i * CFG_SATA_DEVS_PER_BUS + j; + if ((sata_dev_desc[devno].lba > 0) && + (sata_dev_desc[devno].blksz > 0)) { + dev_print (&sata_dev_desc[devno]); + /* initialize partition type */ + init_part (&sata_dev_desc[devno]); + if (curr_dev < 0) + curr_dev = + i * CFG_SATA_DEVS_PER_BUS + j; + } + } + } + return 0; +} +#endif diff --git a/drivers/tsec.c b/drivers/tsec.c index b4187739cb0..1298478704f 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -65,33 +65,31 @@ struct tsec_info_struct { * FEC_PHYIDX */ static struct tsec_info_struct tsec_info[] = { -#if defined(CONFIG_MPC85XX_TSEC1) || defined(CONFIG_MPC83XX_TSEC1) -#if defined(CONFIG_MPC8544DS) +#if defined(CONFIG_TSEC1) +#if defined(CONFIG_MPC8544DS) || defined(CONFIG_MPC8641HPCN) {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX}, #else {TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX}, #endif -#elif defined(CONFIG_MPC86XX_TSEC1) - {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX}, -#else {0, 0, 0}, #endif -#if defined(CONFIG_MPC85XX_TSEC2) || defined(CONFIG_MPC83XX_TSEC2) - {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX}, -#elif defined(CONFIG_MPC86XX_TSEC2) +#if defined(CONFIG_TSEC2) +#if defined(CONFIG_MPC8641HPCN) {TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX}, #else + {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX}, +#endif {0, 0, 0}, #endif #ifdef CONFIG_MPC85XX_FEC {FEC_PHY_ADDR, 0, FEC_PHYIDX}, #else -#if defined(CONFIG_MPC85XX_TSEC3) || defined(CONFIG_MPC83XX_TSEC3) || defined(CONFIG_MPC86XX_TSEC3) +#if defined(CONFIG_TSEC3) {TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_MPC85XX_TSEC4) || defined(CONFIG_MPC83XX_TSEC4) || defined(CONFIG_MPC86XX_TSEC4) +#if defined(CONFIG_TSEC4) {TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX}, #else {0, 0, 0}, @@ -928,6 +926,33 @@ struct phy_info phy_info_BCM5461S = { }, }; +struct phy_info phy_info_BCM5464S = { + 0x02060b1, /* 5464 ID */ + "Broadcom BCM5464S", + 0, /* not clear to me what minor revisions we can shift away */ + (struct phy_cmd[]) { /* config */ + /* Reset and configure the PHY */ + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, + {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, + {miim_end,} + }, + (struct phy_cmd[]) { /* startup */ + /* Status is read once to clear old link state */ + {MIIM_STATUS, miim_read, NULL}, + /* Auto-negotiate */ + {MIIM_STATUS, miim_read, &mii_parse_sr}, + /* Read the status */ + {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr}, + {miim_end,} + }, + (struct phy_cmd[]) { /* shutdown */ + {miim_end,} + }, +}; + struct phy_info phy_info_M88E1011S = { 0x01410c6, "Marvell 88E1011S", @@ -1292,6 +1317,7 @@ struct phy_info *phy_info[] = { &phy_info_cis8204, &phy_info_cis8201, &phy_info_BCM5461S, + &phy_info_BCM5464S, &phy_info_M88E1011S, &phy_info_M88E1111S, &phy_info_M88E1145, diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 3007608360a..21a00b80d41 100755 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -70,10 +70,11 @@ int fat_register_device(block_dev_desc_t *dev_desc, int part_no) { unsigned char buffer[SECTOR_SIZE]; + disk_partition_t info; if (!dev_desc->block_read) return -1; - cur_dev=dev_desc; + cur_dev = dev_desc; /* check if we have a MBR (on floppies we have only a PBR) */ if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) { printf ("** Can't read from device %d **\n", dev_desc->dev); @@ -84,36 +85,39 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) /* no signature found */ return -1; } - if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { - /* ok, we assume we are on a PBR only */ - cur_part = 1; - part_offset=0; - } - else { #if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ (CONFIG_COMMANDS & CFG_CMD_USB) || \ - (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \ + (defined(CONFIG_MMC)) || \ defined(CONFIG_SYSTEMACE) ) - disk_partition_t info; - if(!get_partition_info(dev_desc, part_no, &info)) { - part_offset = info.start; - cur_part = part_no; - } - else { - printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev); - return -1; - } + /* First we assume, there is a MBR */ + if (!get_partition_info (dev_desc, part_no, &info)) { + part_offset = info.start; + cur_part = part_no; + } else if (!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3)) { + /* ok, we assume we are on a PBR only */ + cur_part = 1; + part_offset = 0; + } else { + printf ("** Partition %d not valid on device %d **\n", part_no, dev_desc->dev); + return -1; + } #else + if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) { + /* ok, we assume we are on a PBR only */ + cur_part = 1; + part_offset = 0; + info.start = part_offset; + } else { /* FIXME we need to determine the start block of the * partition where the DOS FS resides. This can be done * by using the get_partition_info routine. For this * purpose the libpart must be included. */ - part_offset=32; + part_offset = 32; cur_part = 1; -#endif } +#endif return 0; } diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h index ba73bae9e5f..4a03cecb591 100644 --- a/include/74xx_7xx.h +++ b/include/74xx_7xx.h @@ -34,6 +34,7 @@ * Exception offsets (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 /* default system reset offset */ +#define _START_OFFSET EXC_OFF_SYS_RESET /*---------------------------------------------------------------- * l2cr values diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h index 114dc92db9e..c9b6a36b4f9 100644 --- a/include/asm-ppc/gpio.h +++ b/include/asm-ppc/gpio.h @@ -45,12 +45,14 @@ typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t; typedef enum gpio_out { GPIO_OUT_0, GPIO_OUT_1, GPIO_OUT_NO_CHG } gpio_out_t; typedef struct { - unsigned long add; /* gpio core base address */ - gpio_driver_t in_out; /* Driver Setting */ - gpio_select_t alt_nb; /* Selected Alternate */ + unsigned long add; /* gpio core base address */ + gpio_driver_t in_out; /* Driver Setting */ + gpio_select_t alt_nb; /* Selected Alternate */ + gpio_out_t out_val;/* Default Output Value */ } gpio_param_s; #endif void gpio_config(int pin, int in_out, int gpio_alt, int out_val); void gpio_write_bit(int pin, int val); +int gpio_read_out_bit(int pin); void gpio_set_chip_configuration(void); diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 5efc3ee2ca7..9780fe15c0d 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -35,18 +35,18 @@ #define MSR_DWE (1<<10) /* Debug Wait Enable (4xx) */ #define MSR_UBLE (1<<10) /* BTB lock enable (e500) */ #define MSR_BE (1<<9) /* Branch Trace */ -#define MSR_DE (1<<9) /* Debug Exception Enable */ +#define MSR_DE (1<<9) /* Debug Exception Enable */ #define MSR_FE1 (1<<8) /* Floating Exception mode 1 */ #define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */ -#define MSR_IR (1<<5) /* Instruction Relocate */ +#define MSR_IR (1<<5) /* Instruction Relocate */ #define MSR_IS (1<<5) /* Book E Instruction space */ -#define MSR_DR (1<<4) /* Data Relocate */ +#define MSR_DR (1<<4) /* Data Relocate */ #define MSR_DS (1<<4) /* Book E Data space */ #define MSR_PE (1<<3) /* Protection Enable */ #define MSR_PX (1<<2) /* Protection Exclusive Mode */ #define MSR_PMM (1<<2) /* Performance monitor mark bit (e500) */ #define MSR_RI (1<<1) /* Recoverable Exception */ -#define MSR_LE (1<<0) /* Little Endian */ +#define MSR_LE (1<<0) /* Little Endian */ #ifdef CONFIG_APUS_FAST_EXCEPT #define MSR_ MSR_ME|MSR_IP|MSR_RI @@ -123,9 +123,9 @@ #define DBCR_EDM 0x80000000 #define DBCR_IDM 0x40000000 #define DBCR_RST(x) (((x) & 0x3) << 28) -#define DBCR_RST_NONE 0 -#define DBCR_RST_CORE 1 -#define DBCR_RST_CHIP 2 +#define DBCR_RST_NONE 0 +#define DBCR_RST_CORE 1 +#define DBCR_RST_CHIP 2 #define DBCR_RST_SYSTEM 3 #define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */ #define DBCR_BT 0x04000000 /* Branch Taken Debug Event */ @@ -266,7 +266,7 @@ #define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ #define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ #define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ -#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ +#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ #define SPRN_LDSTCR 0x3F8 /* Load/Store Control Register */ #define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ #define SPRN_LR 0x008 /* Link Register */ @@ -308,7 +308,7 @@ #define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ #define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ #define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ -#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ +#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ #ifdef CONFIG_BOOKE #define SPRN_SVR 0x3FF /* System Version Register */ #else @@ -451,6 +451,17 @@ #define SPRN_PID1 0x279 /* Process ID Register 1 */ #define SPRN_PID2 0x27a /* Process ID Register 2 */ #define SPRN_MCSR 0x23c /* Machine Check Syndrome register */ +#ifdef CONFIG_440 +#define MCSR_MCS 0x80000000 /* Machine Check Summary */ +#define MCSR_IB 0x40000000 /* Instruction PLB Error */ +#define MCSR_DRB 0x20000000 /* Data Read PLB Error */ +#define MCSR_DWB 0x10000000 /* Data Write PLB Error */ +#define MCSR_TLBP 0x08000000 /* TLB Parity Error */ +#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */ +#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ +#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ +#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ +#endif #define ESR_ST 0x00800000 /* Store Operation */ #if defined(CONFIG_MPC86xx) @@ -484,17 +495,17 @@ #define DBCR0 SPRN_DBCR0 /* Debug Control Register 0 */ #define DBCR1 SPRN_DBCR1 /* Debug Control Register 1 */ #define DBSR SPRN_DBSR /* Debug Status Register */ -#define DCMP SPRN_DCMP /* Data TLB Compare Register */ -#define DEC SPRN_DEC /* Decrement Register */ -#define DMISS SPRN_DMISS /* Data TLB Miss Register */ +#define DCMP SPRN_DCMP /* Data TLB Compare Register */ +#define DEC SPRN_DEC /* Decrement Register */ +#define DMISS SPRN_DMISS /* Data TLB Miss Register */ #define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */ -#define EAR SPRN_EAR /* External Address Register */ +#define EAR SPRN_EAR /* External Address Register */ #define ESR SPRN_ESR /* Exception Syndrome Register */ #define HASH1 SPRN_HASH1 /* Primary Hash Address Register */ #define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */ #define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */ #define HID1 SPRN_HID1 /* Hardware Implementation Register 1 */ -#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */ +#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */ #define IAC1 SPRN_IAC1 /* Instruction Address Register 1 */ #define IAC2 SPRN_IAC2 /* Instruction Address Register 2 */ #define IBAT0L SPRN_IBAT0L /* Instruction BAT 0 Lower Register */ @@ -511,13 +522,13 @@ #define IBAT5U SPRN_IBAT5U /* Instruction BAT 5 Upper Register */ #define IBAT6L SPRN_IBAT6L /* Instruction BAT 6 Lower Register */ #define IBAT6U SPRN_IBAT6U /* Instruction BAT 6 Upper Register */ -#define IBAT7L SPRN_IBAT7L /* Instruction BAT 7 Lower Register */ +#define IBAT7L SPRN_IBAT7L /* Instruction BAT 7 Lower Register */ #define IBAT7U SPRN_IBAT7U /* Instruction BAT 7 Lower Register */ #define ICMP SPRN_ICMP /* Instruction TLB Compare Register */ #define IMISS SPRN_IMISS /* Instruction TLB Miss Register */ -#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */ +#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */ #define LDSTCR SPRN_LDSTCR /* Load/Store Control Register */ -#define L2CR SPRN_L2CR /* PPC 750 L2 control register */ +#define L2CR SPRN_L2CR /* PPC 750 L2 control register */ #define LR SPRN_LR #define MBAR SPRN_MBAR /* System memory base address */ #if defined(CONFIG_MPC86xx) @@ -529,7 +540,7 @@ #define SVR SPRN_SVR /* System-On-Chip Version Register */ #define PVR SPRN_PVR /* Processor Version */ #define RPA SPRN_RPA /* Required Physical Address Register */ -#define SDR1 SPRN_SDR1 /* MMU hash base register */ +#define SDR1 SPRN_SDR1 /* MMU hash base register */ #define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */ #define SPR1 SPRN_SPRG1 #define SPR2 SPRN_SPRG2 @@ -544,6 +555,8 @@ #define SPRG7 SPRN_SPRG7 #define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */ #define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */ +#define SRR2 SPRN_SRR2 /* Save and Restore Register 2 */ +#define SRR3 SPRN_SRR3 /* Save and Restore Register 3 */ #define SVR SPRN_SVR /* System Version Register */ #define TBRL SPRN_TBRL /* Time Base Read Lower Register */ #define TBRU SPRN_TBRU /* Time Base Read Upper Register */ @@ -598,7 +611,7 @@ #define IVOR35 SPRN_IVOR35 #define MCSRR0 SPRN_MCSRR0 #define MCSRR1 SPRN_MCSRR1 -#define L1CSR0 SPRN_L1CSR0 +#define L1CSR0 SPRN_L1CSR0 #define L1CSR1 SPRN_L1CSR1 #define MCSR SPRN_MCSR #define MMUCSR0 SPRN_MMUCSR0 @@ -607,7 +620,7 @@ #define PID1 SPRN_PID1 #define PID2 SPRN_PID2 #define MAS0 SPRN_MAS0 -#define MAS1 SPRN_MAS1 +#define MAS1 SPRN_MAS1 #define MAS2 SPRN_MAS2 #define MAS3 SPRN_MAS3 #define MAS4 SPRN_MAS4 @@ -619,7 +632,7 @@ #define DCRN_BEAR 0x090 /* Bus Error Address Register */ #define DCRN_BESR 0x091 /* Bus Error Syndrome Register */ -#define BESR_DSES 0x80000000 /* Data-Side Error Status */ +#define BESR_DSES 0x80000000 /* Data-Side Error Status */ #define BESR_DMES 0x40000000 /* DMA Error Status */ #define BESR_RWS 0x20000000 /* Read/Write Status */ #define BESR_ETMASK 0x1C000000 /* Error Type */ @@ -676,8 +689,8 @@ #define IOCR_E3LP 0x01000000 #define IOCR_E4TE 0x00800000 #define IOCR_E4LP 0x00400000 -#define IOCR_EDT 0x00080000 -#define IOCR_SOR 0x00040000 +#define IOCR_EDT 0x00080000 +#define IOCR_SOR 0x00040000 #define IOCR_EDO 0x00008000 #define IOCR_2XC 0x00004000 #define IOCR_ATC 0x00002000 @@ -802,7 +815,7 @@ #define PVR_823 PVR_821 #define PVR_850 PVR_821 #define PVR_860 PVR_821 -#define PVR_7400 0x000C0000 +#define PVR_7400 0x000C0000 #define PVR_8240 0x00810100 /* diff --git a/include/ata.h b/include/ata.h index 8584226eb07..aa6e90d4702 100644 --- a/include/ata.h +++ b/include/ata.h @@ -83,6 +83,66 @@ #define ATA_DEVICE(x) ((x & 1)<<4) #define ATA_LBA 0xE0 +enum { + ATA_MAX_DEVICES = 1, /* per bus/port */ + ATA_MAX_PRD = 256, /* we could make these 256/256 */ + ATA_SECT_SIZE = 256, /*256 words per sector */ + + /* bits in ATA command block registers */ + ATA_HOB = (1 << 7), /* LBA48 selector */ + ATA_NIEN = (1 << 1), /* disable-irq flag */ + /*ATA_LBA = (1 << 6), */ /* LBA28 selector */ + ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */ + ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */ + ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */ + ATA_BUSY = (1 << 7), /* BSY status bit */ + ATA_DRDY = (1 << 6), /* device ready */ + ATA_DF = (1 << 5), /* device fault */ + ATA_DRQ = (1 << 3), /* data request i/o */ + ATA_ERR = (1 << 0), /* have an error */ + ATA_SRST = (1 << 2), /* software reset */ + ATA_ABORTED = (1 << 2), /* command aborted */ + /* ATA command block registers */ + ATA_REG_DATA = 0x00, + ATA_REG_ERR = 0x01, + ATA_REG_NSECT = 0x02, + ATA_REG_LBAL = 0x03, + ATA_REG_LBAM = 0x04, + ATA_REG_LBAH = 0x05, + ATA_REG_DEVICE = 0x06, + ATA_REG_STATUS = 0x07, + ATA_PCI_CTL_OFS = 0x02, + /* and their aliases */ + ATA_REG_FEATURE = ATA_REG_ERR, + ATA_REG_CMD = ATA_REG_STATUS, + ATA_REG_BYTEL = ATA_REG_LBAM, + ATA_REG_BYTEH = ATA_REG_LBAH, + ATA_REG_DEVSEL = ATA_REG_DEVICE, + ATA_REG_IRQ = ATA_REG_NSECT, + + /* SETFEATURES stuff */ + SETFEATURES_XFER = 0x03, + XFER_UDMA_7 = 0x47, + XFER_UDMA_6 = 0x46, + XFER_UDMA_5 = 0x45, + XFER_UDMA_4 = 0x44, + XFER_UDMA_3 = 0x43, + XFER_UDMA_2 = 0x42, + XFER_UDMA_1 = 0x41, + XFER_UDMA_0 = 0x40, + XFER_MW_DMA_2 = 0x22, + XFER_MW_DMA_1 = 0x21, + XFER_MW_DMA_0 = 0x20, + XFER_PIO_4 = 0x0C, + XFER_PIO_3 = 0x0B, + XFER_PIO_2 = 0x0A, + XFER_PIO_1 = 0x09, + XFER_PIO_0 = 0x08, + XFER_SW_DMA_2 = 0x12, + XFER_SW_DMA_1 = 0x11, + XFER_SW_DMA_0 = 0x10, + XFER_PIO_SLOW = 0x00 +}; /* * ATA Commands (only mandatory commands listed here) */ diff --git a/include/common.h b/include/common.h index 3c4b37b0dcb..d8b6b469e5f 100644 --- a/include/common.h +++ b/include/common.h @@ -38,7 +38,7 @@ typedef volatile unsigned char vu_char; #include <linux/string.h> #include <asm/ptrace.h> #include <stdarg.h> -#if defined(CONFIG_PCI) && defined(CONFIG_440) +#if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000)) #include <pci.h> #endif #if defined(CONFIG_8xx) @@ -248,10 +248,11 @@ void pci_init (void); void pci_init_board(void); void pciinfo (int, int); -#if defined(CONFIG_PCI) && defined(CONFIG_440) -# if defined(CFG_PCI_PRE_INIT) +#if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000)) int pci_pre_init (struct pci_controller * ); -# endif +#endif + +#if defined(CONFIG_PCI) && defined(CONFIG_440) # if defined(CFG_PCI_TARGET_INIT) void pci_target_init (struct pci_controller *); # endif diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 047e2f1eef9..9acde1e6f03 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -55,6 +55,10 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_DNS | \ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index d756f447f7f..3fc99c50244 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -37,6 +37,7 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ +#undef CONFIG_CPCI405_6U /* enable this for 6U boards */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ @@ -56,6 +57,10 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 852d94a410a..4e2e1a834d8 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -57,6 +57,10 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 2260327c3f8..ab302df7437 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -56,6 +56,10 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h index 90d3a8d8fa3..7b5f72836e6 100644 --- a/include/configs/CPCI440.h +++ b/include/configs/CPCI440.h @@ -33,6 +33,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_CPCI440 1 /* Board is ebony */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index ccd1f19903b..7fa9ed2d42a 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -49,6 +49,7 @@ /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */ #define CONFIG_SYSTEMACE 1 #define CFG_SYSTEMACE_BASE 0xf0000000 +#define CFG_SYSTEMACE_WIDTH 8 #define CONFIG_DOS_PARTITION 1 /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */ diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 2ad6f06985a..48b94ee45ec 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -38,6 +38,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ @@ -262,7 +263,6 @@ #define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE) /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/ #define CFG_PCI_TARGET_INIT /* let board init pci target*/ #define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 465a4ecb8b9..7aae2bd1437 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -104,6 +104,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_METROBOX 1 /* Board is Metrobox */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ @@ -331,7 +332,6 @@ #define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE) /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/ #define CFG_PCI_TARGET_INIT /* let board init pci target*/ #define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 697631345f6..7e1005c1ae9 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -303,11 +303,11 @@ #endif #define CONFIG_GMII 1 /* MII PHY management */ -#define CONFIG_MPC83XX_TSEC1 1 +#define CONFIG_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0x1c #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 0460be9e569..20c6d5a365e 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -432,10 +432,10 @@ #endif #define CONFIG_GMII 1 /* MII PHY management */ -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 906339e9d88..834934d0b6a 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -374,18 +374,18 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_MII #define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */ -#define CONFIG_MPC83XX_TSEC1 +#define CONFIG_TSEC1 -#ifdef CONFIG_MPC83XX_TSEC1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#ifdef CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "TSEC0" #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ #define TSEC1_PHYIDX 0 #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 #define CONFIG_HAS_ETH1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC2_NAME "TSEC1" #define CFG_TSEC2_OFFSET 0x25000 #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ #define TSEC2_PHY_ADDR 4 @@ -628,11 +628,11 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_MPC83XX_TSEC1 +#ifdef CONFIG_TSEC1 #define CONFIG_ETHADDR 00:E0:0C:00:8C:01 #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 #endif diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5aeea586800..9176be388e6 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -366,10 +366,10 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 418a3a38e68..b568cb4df75 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -212,10 +212,10 @@ #elif defined(CONFIG_TSEC_ENET) #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_MPC85XX_FEC 1 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define TSEC1_PHY_ADDR 7 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index fb360d282cd..e047e259a5b 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -373,10 +373,10 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 4c3430897da..7cd62e95a91 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -359,10 +359,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC1" -#define CONFIG_MPC85XX_TSEC3 1 -#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 680009d6006..a0d291eef48 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -391,14 +391,14 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1" -#define CONFIG_MPC85XX_TSEC3 1 -#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC2" -#undef CONFIG_MPC85XX_TSEC4 -#define CONFIG_MPC85XX_TSEC4_NAME "eTSEC3" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC1" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC2" +#undef CONFIG_TSEC4 +#define CONFIG_TSEC4_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 4c8b4e73f3b..b7e703ca183 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -373,10 +373,10 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 21e66376805..043397fc21b 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -356,10 +356,10 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 3f65644fdd4..0ff0416138d 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -353,12 +353,12 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1" -#undef CONFIG_MPC85XX_TSEC3 -#undef CONFIG_MPC85XX_TSEC4 +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC1" +#undef CONFIG_TSEC3 +#undef CONFIG_TSEC4 #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 2 diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 41daa2bfeaa..12af24f7499 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -359,14 +359,14 @@ #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC86XX_TSEC1 1 -#define CONFIG_MPC86XX_TSEC1_NAME "eTSEC1" -#define CONFIG_MPC86XX_TSEC2 1 -#define CONFIG_MPC86XX_TSEC2_NAME "eTSEC2" -#define CONFIG_MPC86XX_TSEC3 1 -#define CONFIG_MPC86XX_TSEC3_NAME "eTSEC3" -#define CONFIG_MPC86XX_TSEC4 1 -#define CONFIG_MPC86XX_TSEC4_NAME "eTSEC4" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "eTSEC4" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 4fb54402b1b..8f130f5ccd8 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -262,10 +262,10 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 87ab9348735..0286b53e017 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -258,10 +258,10 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 7935593febe..aa3627b4d77 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -44,7 +44,7 @@ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ @@ -234,15 +234,21 @@ #ifndef CONFIG_CAM5200 #define CUSTOM_ENV_SETTINGS \ "bootfile=/tftpboot/tqm5200/uImage\0" \ + "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0" \ + "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" #else -#define CUSTOM_ENV_SETTINGS \ +#define CUSTOM_ENV_SETTINGS \ "bootfile=cam5200/uImage\0" \ "u-boot=cam5200/u-boot.bin\0" \ "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttyS0\0" \ + "kernel_addr=200000\0" \ + "fdt_addr=400000\0" \ + "hostname=tqm5200\0" \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -252,13 +258,17 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate}\0" \ + "console=${console},${baudrate}\0" \ "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ - "bootm\0" \ + "net_nfs=tftp ${kernel_addr} ${bootfile};" \ + "run nfsargs addip addcons;bootm\0" \ + "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};" \ + "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;" \ + "run nfsargs addip addcons;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ ENV_UPDT \ @@ -676,4 +686,18 @@ /* Interval between registers */ #define CFG_ATA_STRIDE 4 +/*----------------------------------------------------------------------- + * Open firmware flat tree support + *----------------------------------------------------------------------- + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + #endif /* __CONFIG_H */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index ed0357791b4..4a5f8b67578 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -248,10 +248,10 @@ extern int tqm834x_num_flash_banks; #define CONFIG_NET_MULTI #endif -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index f45f3a2f5ac..b0b9dd3ab89 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -258,10 +258,10 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h index 9b32514867a..f2ad097db29 100644 --- a/include/configs/XPEDITE1K.h +++ b/include/configs/XPEDITE1K.h @@ -238,7 +238,6 @@ extern void out32(unsigned int, unsigned long); #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 0f447b004a0..517d130d5ca 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -75,7 +75,7 @@ #define CFG_TEMP_STACK_OCM 1 /* OCM as init ram */ /* On Chip Memory location */ -#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_ADDR 0xf8000000 #define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ #define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ #define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ @@ -159,7 +159,7 @@ */ #define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ #define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ -#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (12 << 10)) /* Copy SPL here*/ +#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/ #define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ #define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ #define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 67f62d3dfbe..df057d9c953 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -29,6 +29,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_ALPR 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ @@ -94,7 +95,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -256,7 +257,7 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ @@ -274,7 +275,6 @@ #define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_MASTER_INIT diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 763d1c7a8b4..d58344d7177 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_BAMBOO 1 /* Board is BAMBOO */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -73,9 +74,9 @@ * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ #define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ -#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (4 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -114,8 +115,8 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ -#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ +#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ @@ -125,11 +126,11 @@ #define CFG_FLASH_ADDR1 0x2aa #define CFG_FLASH_WORD_SIZE unsigned char -#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */ -#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */ +#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */ +#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -388,7 +389,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT diff --git a/include/configs/ebony.h b/include/configs/ebony.h index a42319b097d..4a1385ccb92 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_EBONY 1 /* Board is ebony */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -121,7 +122,7 @@ #define CFG_FLASH_WORD_SIZE unsigned char #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ @@ -269,7 +270,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index cc47a168ed3..a7eda0773bc 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -314,7 +314,6 @@ #undef CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #undef CFG_PCI_MASTER_INIT diff --git a/include/configs/luan.h b/include/configs/luan.h index 045a144aad8..cbb59c50eaf 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -273,7 +273,6 @@ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #undef CFG_PCI_MASTER_INIT diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h new file mode 100644 index 00000000000..1d87c73c711 --- /dev/null +++ b/include/configs/lwmon5.h @@ -0,0 +1,449 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * lwmon5.h - configuration for lwmon5 board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_LWMON5 1 /* Board is lwmon5 */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_LIME_BASE_0 0xc0000000 +#define CFG_LIME_BASE_1 0xc1000000 +#define CFG_LIME_BASE_2 0xc2000000 +#define CFG_LIME_BASE_3 0xc3000000 +#define CFG_FPGA_BASE_0 0xc4000000 +#define CFG_FPGA_BASE_1 0xc4200000 +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* no external clock provided */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/* define this if you want console on UART1 */ +#define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */ + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ +#define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ +#if 0 /* test-only: disable ECC for now */ +#define CONFIG_DDR_ECC 1 /* enable ECC */ +#endif + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ +#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=lwmon5\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xxFP\0" \ + "bootfile=/tftpboot/lwmon5/uImage\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ + "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \ + "cp.b 200000 FFF80000 80000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#ifdef CONFIG_440EPX +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +#define CMD_USB CFG_CMD_USB +#else +#define CMD_USB 0 /* no USB on 440GRx */ +#endif /* CONFIG_440EPX */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CMD_USB) + +#define CONFIG_SUPPORT_VFAT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03050200 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xdc000) + +/* Memory Bank 1 (Lime) initialization */ +#define CFG_EBC_PB1AP 0x01004380 +#define CFG_EBC_PB1CR (CFG_LIME_BASE_0 | 0xdc000) + +/* Memory Bank 2 (FPGA) initialization */ +#define CFG_EBC_PB2AP 0x01004400 +#define CFG_EBC_PB2CR (CFG_FPGA_BASE_0 | 0x1c000) + +/* Memory Bank 3 (FPGA2) initialization */ +#define CFG_EBC_PB3AP 0x01004400 +#define CFG_EBC_PB3CR (CFG_FPGA_BASE_1 | 0x1c000) + +#define CFG_EBC_CFG 0xb8400000 + +/*----------------------------------------------------------------------- + * Graphics (Fujitsu Lime) + *----------------------------------------------------------------------*/ +/* SDRAM Clock frequency adjustment register */ +#define CFG_LIME_SDRAM_CLOCK 0xC1FC0000 +/* Lime Clock frequency is to set 133MHz */ +#define CFG_LIME_CLOCK_133MHZ 0x10000 + +/* SDRAM Parameter register */ +#define CFG_LIME_MMR 0xC1FCFFFC +/* SDRAM parameter value */ +#define CFG_LIME_MMR_VALUE 0x414FB7F2 + +/*----------------------------------------------------------------------- + * GPIO Setup + *----------------------------------------------------------------------*/ +#define CFG_GPIO_PHY1_RST 12 +#define CFG_GPIO_FLASH_WP 14 +#define CFG_GPIO_PHY0_RST 22 +#define CFG_GPIO_WATCHDOG 58 +#define CFG_GPIO_LIME_S 59 +#define CFG_GPIO_LIME_RST 60 + +/*----------------------------------------------------------------------- + * PPC440 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index fe4e63810ee..68e8cec251c 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -41,6 +41,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_OCOTEA 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -136,7 +137,7 @@ #define CFG_FLASH_WORD_SIZE unsigned char #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ @@ -293,7 +294,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index aa0901f3ff4..22f9f84ec23 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -35,6 +35,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_P3P440 1 /* Board is P3P440 */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ @@ -226,7 +227,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CONFIG_DISABLE_PISE_TEST /* disable PISE test (PCIX only)*/ @@ -285,7 +285,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 23bdfc8dfb9..69d97d66ea1 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_PCS440EP 1 /* Board is PCS440EP */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -103,21 +104,28 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_ENV_OVERWRITE 1 /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +#define ENV_NAME_REVLEV "revision_level" +#define ENV_NAME_SOLDER "solder_switch" +#define ENV_NAME_DIP "dip" + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define SPD_EEPROM_ADDRESS {0x50} +#define CONFIG_PROG_SDRAM_TLB 1 /*----------------------------------------------------------------------- * I2C @@ -142,6 +150,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=pcs440ep\0" \ + "use_eeprom_ethaddr=default\0" \ + "cs_test=off\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -172,6 +182,36 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +/* check U-Boot image with SHA1 sum */ +#define CONFIG_SHA1_CHECK_UB_IMG 1 +#define CONFIG_SHA1_START CFG_MONITOR_BASE +#define CONFIG_SHA1_LEN CFG_MONITOR_LEN + +/*----------------------------------------------------------------------- + * Definitions for status LED + */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 + +#define STATUS_LED_BIT 0x08 /* LED 1 is on GPIO_PPC_1 */ +#define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_BIT1 0x04 /* LED 2 is on GPIO_PPC_2 */ +#define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_BIT2 0x02 /* LED 3 is on GPIO_PPC_3 */ +#define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_BIT3 0x01 /* LED 4 is on GPIO_PPC_4 */ +#define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE3 STATUS_LED_OFF + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + #define CONFIG_BAUDRATE 115200 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -213,7 +253,10 @@ CFG_CMD_DIAG | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ + CFG_CMD_EXT2 | \ + CFG_CMD_FAT | \ CFG_CMD_I2C | \ + CFG_CMD_IDE | \ CFG_CMD_IRQ | \ CFG_CMD_MII | \ CFG_CMD_NET | \ @@ -221,9 +264,8 @@ CFG_CMD_PCI | \ CFG_CMD_PING | \ CFG_CMD_REGINFO | \ + CFG_CMD_REISER | \ CFG_CMD_SDRAM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ CFG_CMD_USB ) @@ -266,7 +308,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -315,76 +356,76 @@ /*----------------------------------------------------------------------- * PPC440 GPIO Configuration */ -#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \ +#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ { \ /* GPIO Core 0 */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6 EBC_CS_N(1) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7 EBC_CS_N(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8 EBC_CS_N(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9 EBC_CS_N(4) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO10 EBC_CS_N(5) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO11 EBC_BUS_ERR */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO12 ZII_p0Rxd(0) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO13 ZII_p0Rxd(1) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO14 ZII_p0Rxd(2) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO15 ZII_p0Rxd(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16 ZII_p0Txd(0) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17 ZII_p0Txd(1) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18 ZII_p0Txd(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19 ZII_p0Txd(3) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO20 ZII_p0Rx_er */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO21 ZII_p0Rx_dv */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO22 ZII_p0RxCrs */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23 ZII_p0Tx_er */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24 ZII_p0Tx_en */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO25 ZII_p0Col */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO26 USB2D_RXVALID */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO28 USB2D_TXVALID */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO12 ZII_p0Rxd(0) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO13 ZII_p0Rxd(1) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO14 ZII_p0Rxd(2) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO15 ZII_p0Rxd(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO16 ZII_p0Txd(0) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO17 ZII_p0Txd(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO18 ZII_p0Txd(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO19 ZII_p0Txd(3) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO20 ZII_p0Rx_er */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO21 ZII_p0Rx_dv */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO22 ZII_p0RxCrs */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO23 ZII_p0Tx_er */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO24 ZII_p0Tx_en */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO25 ZII_p0Col */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO26 USB2D_RXVALID */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ }, \ { \ /* GPIO Core 1 */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO32 USB2D_OPMODE0 */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO33 USB2D_OPMODE1 */ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT3 }, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37 UART0_RTS_N */ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT2 }, /* GPIO39 UART0_RI_N UART1_SIN */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO40 UIC_IRQ(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO41 UIC_IRQ(1) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO42 UIC_IRQ(2) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO43 UIC_IRQ(3) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ -{ GPIO1_BASE, GPIO_BI, GPIO_SEL }, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO49 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO50 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO51 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO52 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO53 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO54 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO55 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO56 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO57 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO58 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO59 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO60 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO61 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO62 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO63 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO32 USB2D_OPMODE0 */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO33 USB2D_OPMODE1 */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_NO_CHG}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT3, GPIO_OUT_NO_CHG}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO37 UART0_RTS_N */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_NO_CHG}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_NO_CHG}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_BI, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO63 Unselect via TraceSelect Bit */ \ } \ } @@ -410,4 +451,39 @@ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */ + +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_IDE_RESET 1 + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_CF1 + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x0000) + +/* These addresses need to be shifted one place to the left + * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) + * These values are shifted + */ +#define CFG_ATA_PORT_ADDR(port) ((port) << 1) + #endif /* __CONFIG_H */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 65aac5cefd3..e6e3866a07e 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -401,10 +401,10 @@ #define CONFIG_NET_MULTI 1 #endif -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_PHY_BCM5421S 1 #define TSEC1_PHY_ADDR 0x19 #define TSEC2_PHY_ADDR 0x1a diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index d7d07a62fc9..8b2ec077bd9 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -182,6 +182,15 @@ #undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */ /************************************************************ +*SATA/Native Stuff +************************************************************/ +#define CFG_SATA_SUPPORTED 1 +#define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */ +#define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */ +#define CFG_SATA_MAXDEVICES (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS) +#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */ + +/************************************************************ * ATAPI support (experimental) ************************************************************/ #define CONFIG_ATAPI /* enable ATAPI Support */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 23243a4971a..32199929a97 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -37,6 +37,7 @@ #else #define CONFIG_440GRX 1 /* Specific PPC440GRx */ #endif +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ /* Detect Sequoia PLL input clock automatically via CPLD bit */ #define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \ @@ -58,6 +59,7 @@ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ #define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_OCM_DATA_ADDR CFG_OCM_BASE #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 @@ -80,7 +82,7 @@ #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR /*----------------------------------------------------------------------- * Serial Port @@ -125,7 +127,7 @@ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -327,6 +329,22 @@ CFG_CMD_SDRAM | \ CMD_USB) +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_UART | \ + CFG_POST_I2C | \ + CFG_POST_CACHE | \ + CFG_POST_FPU | \ + CFG_POST_ETHER | \ + CFG_POST_SPR) + +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */ + +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + #define CONFIG_SUPPORT_VFAT /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -370,7 +388,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 625cf20144f..21065b9d05c 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -230,10 +230,10 @@ #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #undef CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 1978a32bb1e..2e527b23ab5 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -42,20 +42,20 @@ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/ -#undef CONFIG_PCI /* pci ethernet support */ -#define CONFIG_TSEC_ENET /* tsec ethernet support*/ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ +#define CONFIG_PCI /* PCI ethernet support */ +#define CONFIG_TSEC_ENET /* tsec ethernet support*/ +#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ /* sysclk for MPC85xx */ -#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ +#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ /* Blinkin' LEDs for Robert :-) */ @@ -64,23 +64,23 @@ /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#undef CFG_DRAM_TEST /* memory test, takes time */ -#define CFG_MEMTEST_START 0x00200000 /* memtest region */ -#define CFG_MEMTEST_END 0x00400000 +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 -/* Localbus connector. There are many options that can be +/* Localbus connector. There are many options that can be * connected here, including sdram or lots of flash. * This address, however, is used to configure a 256M local bus * window that includes the Config latch below. */ -#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */ +#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */ #define CFG_LBC_OPTION_SIZE 256 /* 256MB */ /* There are various flash options used, we configure for the largest, @@ -88,16 +88,16 @@ * sizes. */ #ifdef CONFIG_STXSSA_4M -#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */ +#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */ #else -#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */ +#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */ #endif #define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */ #define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7) #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 -#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ #define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -110,22 +110,22 @@ */ #define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */ #define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */ -#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */ +#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */ -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #else -#undef CFG_RAMBOOT +#undef CFG_RAMBOOT #endif #ifdef CFG_RAMBOOT -#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */ +#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */ #else -#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ +#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ @@ -140,14 +140,14 @@ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */ +#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */ #undef CONFIG_CLOCKS_IN_MHZ /* local bus definitions */ -#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */ +#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */ #define CFG_OR2_PRELIM 0xfc006901 -#define CFG_LBC_LCRR 0x00030004 /* local bus freq */ +#define CFG_LBC_LCRR 0x00030004 /* local bus freq */ #define CFG_LBC_LBCR 0x00000000 #define CFG_LBC_LSRT 0x20000000 #define CFG_LBC_MRTPR 0x20000000 @@ -158,52 +158,52 @@ #define CFG_LBC_LSDMR_5 0x4061b723 #define CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_LOCK 1 -#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ /* Serial Port */ #define CONFIG_CONS_INDEX 2 #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_REG_SIZE 1 #define CFG_NS16550_CLK get_bus_freq(0) #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} -#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ -#ifdef CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif /* I2C */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #if 0 -#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */ #else /* I did the 'if 0' so we could keep the syntax above if ever needed. */ #undef CFG_I2C_NOPROBES #endif #define CFG_I2C_OFFSET 0x3000 -/* I2C EEPROM. AT24C32, we keep our environment in here. +/* I2C EEPROM. AT24C32, we keep our environment in here. */ #define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */ #define CFG_I2C_EEPROM_ADDR_LEN 2 @@ -232,35 +232,35 @@ #if defined(CONFIG_PCI) /* PCI Ethernet card */ #define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP +#define CONFIG_EEPRO100 +#define CONFIG_TULIP #if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ #endif -#undef CONFIG_PCI_SCAN_SHOW -#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +#define CONFIG_PCI_SCAN_SHOW +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" -#undef CONFIG_MPS85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 @@ -270,9 +270,9 @@ #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ -#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 2 /* which channel for ether */ +#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */ +#undef CONFIG_ETHER_NONE /* define if ether on something else */ +#define CONFIG_ETHER_INDEX 2 /* which channel for ether */ #if (CONFIG_ETHER_INDEX == 2) /* @@ -281,19 +281,19 @@ * - Select bus for bd/buffers * - Full duplex */ - #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - #define CFG_CPMFCR_RAMTYPE 0 + #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) + #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) + #define CFG_CPMFCR_RAMTYPE 0 #if 0 - #define CFG_FCC_PSMR (FCC_PSMR_FDE) + #define CFG_FCC_PSMR (FCC_PSMR_FDE) #else - #define CFG_FCC_PSMR 0 + #define CFG_FCC_PSMR 0 #endif #define FETH2_RST 0x01 #elif (CONFIG_ETHER_INDEX == 3) /* need more definitions here for FE3 */ #define FETH3_RST 0x80 -#endif /* CONFIG_ETHER_INDEX */ +#endif /* CONFIG_ETHER_INDEX */ /* MDIO is done through the TSEC0 control. */ @@ -415,13 +415,13 @@ */ #ifdef CFG_ENV_IS_IN_EEPROM /* use restricted "standard" environment */ -#define CONFIG_BAUDRATE 38400 +#define CONFIG_BAUDRATE 38400 #define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */ #define CONFIG_BOOTCOMMAND "bootm 0xffc00000 0xffd00000" #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,$baudrate" #define CONFIG_SERVERIP 192.168.85.1 -#define CONFIG_IPADDR 192.168.85.60 +#define CONFIG_IPADDR 192.168.85.60 #define CONFIG_GATEWAYIP 192.168.85.1 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_HOSTNAME STX_SSA @@ -431,7 +431,7 @@ #else /* ENV IS IN FLASH -- use a full-blown envionment */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 2b28f93a071..d756be7165f 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -30,6 +30,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_TAISHAN 1 /* Board is taishan */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -217,8 +218,8 @@ #define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_NET_MULTI 1 -#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ -#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ +#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ +#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ #define CONFIG_PHY2_ADDR 0x1 #define CONFIG_PHY3_ADDR 0x3 #define CONFIG_ET1011C_PHY 1 @@ -297,7 +298,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index b68ae54b94d..3b106efdf51 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -38,6 +38,7 @@ #define CONFIG_440GR 1 /* Specific PPC440GR support */ #define CONFIG_HOSTNAME yellowstone #endif +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ @@ -122,7 +123,7 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -311,7 +312,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 7f8b0228aec..1fdcc4b5052 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -289,7 +289,6 @@ #undef CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #undef CFG_PCI_MASTER_INIT diff --git a/include/logbuff.h b/include/logbuff.h index 3acfc18a782..d4157290538 100644 --- a/include/logbuff.h +++ b/include/logbuff.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2002 + * (C) Copyright 2002-2007 * Detlev Zundel, dzu@denx.de. * * See file CREDITS for list of people who contributed to this @@ -25,6 +25,7 @@ #ifdef CONFIG_LOGBUFFER +#define LOGBUFF_MAGIC 0xc0de4ced /* Forced by code, eh! */ #define LOGBUFF_LEN (16384) /* Must be 16k right now */ #define LOGBUFF_MASK (LOGBUFF_LEN-1) #define LOGBUFF_OVERHEAD (4096) /* Logbuffer overhead for extra info */ @@ -32,6 +33,29 @@ #define LOGBUFF_INITIALIZED (1<<31) +/* The mapping used here has to be the same as in setup_ext_logbuff () + in linux/kernel/printk */ + +typedef struct { + union { + struct { + unsigned long tag; + unsigned long start; + unsigned long con; + unsigned long end; + unsigned long chars; + } v2; + struct { + unsigned long dummy; + unsigned long tag; + unsigned long start; + unsigned long size; + unsigned long chars; + } v1; + }; + unsigned char buf[0]; +} logbuff_t; + int drv_logbuff_init (void); void logbuff_init_ptrs (void); void logbuff_log(char *msg); diff --git a/include/mpc5xx.h b/include/mpc5xx.h index 7508f6df20e..414651fa0f8 100644 --- a/include/mpc5xx.h +++ b/include/mpc5xx.h @@ -36,6 +36,7 @@ * Exception offsets (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 /* System reset */ +#define _START_OFFSET EXC_OFF_SYS_RESET /*----------------------------------------------------------------------- * ISB bit in IMMR to set internal memory map @@ -75,10 +76,10 @@ #define SIUMCR_DBPC01 0x00080000 /* - " - */ #define SIUMCR_DBPC10 0x00100000 /* - " - */ #define SIUMCR_DBPC11 0x00180000 /* - " - */ -#define SIUMCR_GPC00 0x00000000 /* General Pins Config */ -#define SIUMCR_GPC01 0x00020000 /* General Pins Config */ -#define SIUMCR_GPC10 0x00040000 /* General Pins Config */ -#define SIUMCR_GPC11 0x00060000 /* General Pins Config */ +#define SIUMCR_GPC00 0x00000000 /* General Pins Config */ +#define SIUMCR_GPC01 0x00020000 /* General Pins Config */ +#define SIUMCR_GPC10 0x00040000 /* General Pins Config */ +#define SIUMCR_GPC11 0x00060000 /* General Pins Config */ #define SIUMCR_DLK 0x00010000 /* Debug Register Lock */ #define SIUMCR_SC00 0x00000000 /* Multi Chip 32 bit */ #define SIUMCR_SC01 0x00004000 /* Muilt Chip 16 bit */ @@ -89,7 +90,7 @@ #define SIUMCR_MLRC01 0x00000400 /* - " - */ #define SIUMCR_MLRC10 0x00000800 /* - " - */ #define SIUMCR_MLRC11 0x00000c00 /* - " - */ -#define SIUMCR_MTSC 0x00000100 /* Memory transfer */ +#define SIUMCR_MTSC 0x00000100 /* Memory transfer */ /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control Register @@ -122,13 +123,13 @@ * SCCR - System Clock and reset Control Register */ #define SCCR_DFNL_MSK 0x00000070 /* DFNL mask */ -#define SCCR_DFNH_MSK 0x00000007 /* DFNH mask */ +#define SCCR_DFNH_MSK 0x00000007 /* DFNH mask */ #define SCCR_DFNL_SHIFT 0x0000004 /* DFNL shift value */ #define SCCR_RTSEL 0x00100000 /* RTC circuit input source select */ #define SCCR_EBDF00 0x00000000 /* Division factor 1. CLKOUT is GCLK2 */ #define SCCR_EBDF11 0x00060000 /* reserved */ #define SCCR_TBS 0x02000000 /* Time Base Source */ -#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */ +#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */ #define SCCR_COM00 0x00000000 /* full strength CLKOUT output buffer */ #define SCCR_COM01 0x20000000 /* half strength CLKOUT output buffer */ #define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */ @@ -137,11 +138,11 @@ /*----------------------------------------------------------------------- * MC - Memory Controller */ -#define BR_V 0x00000001 /* Bank valid */ -#define BR_BI 0x00000002 /* Burst inhibit */ -#define BR_PS_8 0x00000400 /* 8 bit port size */ -#define BR_PS_16 0x00000800 /* 16 bit port size */ -#define BR_PS_32 0x00000000 /* 32 bit port size */ +#define BR_V 0x00000001 /* Bank valid */ +#define BR_BI 0x00000002 /* Burst inhibit */ +#define BR_PS_8 0x00000400 /* 8 bit port size */ +#define BR_PS_16 0x00000800 /* 16 bit port size */ +#define BR_PS_32 0x00000000 /* 32 bit port size */ #define BR_LBDIR 0x00000008 /* Late burst data in progess */ #define BR_SETA 0x00000004 /* External Data Acknowledge */ #define OR_SCY_3 0x00000030 /* 3 clock cycles wait states */ @@ -158,8 +159,8 @@ /*----------------------------------------------------------------------- * UMCR - UIMB Module Configuration Register */ -#define UMCR_FSPEED 0x00000000 /* Full speed. Opposit of UMCR_HSPEED */ -#define UMCR_HSPEED 0x10000000 /* Half speed */ +#define UMCR_FSPEED 0x00000000 /* Full speed. Opposit of UMCR_HSPEED */ +#define UMCR_HSPEED 0x10000000 /* Half speed */ /*----------------------------------------------------------------------- * ICTRL - I-Bus Support Control Register @@ -173,16 +174,16 @@ * SCI - Serial communication interface */ -#define SCI_TDRE 0x0100 /* Transmit data register empty */ -#define SCI_TE 0x0008 /* Transmitter enabled */ +#define SCI_TDRE 0x0100 /* Transmit data register empty */ +#define SCI_TE 0x0008 /* Transmitter enabled */ #define SCI_RE 0x0004 /* Receiver enabled */ -#define SCI_RDRF 0x0040 /* Receive data register full */ -#define SCI_PE 0x0400 /* Parity enable */ -#define SCI_SCXBR_MK 0x1fff /* Baudrate mask */ -#define SCI_SCXDR_MK 0x00ff /* Data register mask */ +#define SCI_RDRF 0x0040 /* Receive data register full */ +#define SCI_PE 0x0400 /* Parity enable */ +#define SCI_SCXBR_MK 0x1fff /* Baudrate mask */ +#define SCI_SCXDR_MK 0x00ff /* Data register mask */ #define SCI_M_11 0x0200 /* Frame size is 11 bit */ #define SCI_M_10 0x0000 /* Frame size is 10 bit */ -#define SCI_PORT_1 ((int)1) /* Place this later somewhere better */ +#define SCI_PORT_1 ((int)1) /* Place this later somewhere better */ #define SCI_PORT_2 ((int)2) #endif /* __MPC5XX_H__ */ diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index 089aa1322b8..a4581a3e6bb 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -39,6 +39,7 @@ /* Exception offsets (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 +#define _START_OFFSET EXC_OFF_SYS_RESET /* useful macros for manipulating CSx_START/STOP */ #if defined(CONFIG_MGT5100) diff --git a/include/mpc8220.h b/include/mpc8220.h index ff7acc6d3ab..d3b1457f9c5 100644 --- a/include/mpc8220.h +++ b/include/mpc8220.h @@ -35,6 +35,7 @@ /* Exception offsets (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 +#define _START_OFFSET EXC_OFF_SYS_RESET /* Internal memory map */ /* MPC8220 Internal Register MMAP */ diff --git a/include/mpc824x.h b/include/mpc824x.h index 30fc795382f..30f01d5aa89 100644 --- a/include/mpc824x.h +++ b/include/mpc824x.h @@ -88,7 +88,7 @@ #define PREP_PCI_MEMORY_BUS 0x80000000 #define PREP_PCI_MEMORY_SIZE 0x80000000 #define MPC107_PCI_CMD 0x80000004 /* MPC107 PCI cmd reg */ -#define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */ +#define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */ #define PROC_INT1_ADR 0x800000a8 /* MPC107 Processor i/f cfg1 */ #define PROC_INT2_ADR 0x800000ac /* MPC107 Processor i/f cfg2 */ #define MEM_CONT1_ADR 0x800000f0 /* MPC107 Memory control config. 1 */ @@ -98,8 +98,8 @@ #define MEM_ERREN1_ADR 0x800000c0 /* MPC107 Memory error enable 1 */ #define MEM_START1_ADR 0x80000080 /* MPC107 Memory starting addr */ #define MEM_START2_ADR 0x80000084 /* MPC107 Memory starting addr-lo */ -#define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/ -#define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/ +#define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/ +#define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/ #define MEM_END1_ADR 0x80000090 /* MPC107 Memory ending address */ #define MEM_END2_ADR 0x80000094 /* MPC107 Memory ending addr-lo */ #define XMEM_END1_ADR 0x80000098 /* MPC107 Extended mem. end addrs-hi */ @@ -142,6 +142,8 @@ #define EXC_OFF_JMDDI 0x1600 /* Java Mode denorm detect Interr -- WTF??*/ #define EXC_OFF_RMTE 0x2000 /* Run Mode or Trace Exception */ +#define _START_OFFSET EXC_OFF_SYS_RESET + #define MAP_A_CONFIG_ADDR_HIGH 0x8000 /* Upper half of CONFIG_ADDR for Map A */ #define MAP_A_CONFIG_ADDR_LOW 0x0CF8 /* Lower half of CONFIG_ADDR for Map A */ #define MAP_A_CONFIG_DATA_HIGH 0x8000 /* Upper half of CONFIG_DAT for Map A */ diff --git a/include/mpc8260.h b/include/mpc8260.h index d9dd92d9a5e..052529409a1 100644 --- a/include/mpc8260.h +++ b/include/mpc8260.h @@ -53,7 +53,7 @@ * Exception offsets (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 /* System reset */ - +#define _START_OFFSET EXC_OFF_SYS_RESET /*----------------------------------------------------------------------- * BCR - Bus Configuration Register 4-25 @@ -664,7 +664,7 @@ #define PSDMR_CL_3 0x00000003 /* CAS Latency = 3 */ /*----------------------------------------------------------------------- - * LSDMR - Local Bus SDRAM Mode Register 10-24 + * LSDMR - Local Bus SDRAM Mode Register 10-24 */ /* @@ -707,23 +707,23 @@ /*----------------------------------------------------------------------- * TMR1-TMR4 - Timer Mode Registers 17-6 */ -#define TMRx_PS_MSK 0xff00 /* Prescaler Value */ +#define TMRx_PS_MSK 0xff00 /* Prescaler Value */ #define TMRx_CE_MSK 0x00c0 /* Capture Edge and Enable Interrupt*/ -#define TMRx_OM 0x0020 /* Output Mode */ +#define TMRx_OM 0x0020 /* Output Mode */ #define TMRx_ORI 0x0010 /* Output Reference Interrupt Enable*/ -#define TMRx_FRR 0x0008 /* Free Run/Restart */ +#define TMRx_FRR 0x0008 /* Free Run/Restart */ #define TMRx_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */ -#define TMRx_GE 0x0001 /* Gate Enable */ +#define TMRx_GE 0x0001 /* Gate Enable */ #define TMRx_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event*/ #define TMRx_CE_RISING 0x0040 /* Capture on Rising TINx edge only */ #define TMRx_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */ -#define TMRx_CE_ANY 0x00c0 /* Capture on any TINx edge */ +#define TMRx_CE_ANY 0x00c0 /* Capture on any TINx edge */ -#define TMRx_ICLK_IN_CAS 0x0000 /* Internally cascaded input */ +#define TMRx_ICLK_IN_CAS 0x0000 /* Internally cascaded input */ #define TMRx_ICLK_IN_GEN 0x0002 /* Internal General system clock*/ #define TMRx_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16*/ -#define TMRx_ICLK_TIN_PIN 0x0006 /* TINx pin */ +#define TMRx_ICLK_TIN_PIN 0x0006 /* TINx pin */ /*----------------------------------------------------------------------- diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 60fc214b3e2..336c0ac4f22 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -25,6 +25,7 @@ /* System reset offset (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 +#define _START_OFFSET EXC_OFF_SYS_RESET /* IMMRBAR - Internal Memory Register Base Address */ @@ -438,9 +439,9 @@ #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 #if defined(CONFIG_MPC831X) -#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000 +#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000 #define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000 -#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000 +#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000 #define HRCWH_ROM_LOC_NAND_LP_16BIT 0x00600000 #define HRCWH_RL_EXT_LEGACY 0x00000000 @@ -1217,7 +1218,7 @@ #define FCR_CMD1 0x00FF0000 #define FCR_CMD1_SHIFT 16 #define FCR_CMD2 0x0000FF00 -#define FCR_CMD2_SHIFT 8 +#define FCR_CMD2_SHIFT 8 #define FCR_CMD3 0x000000FF #define FCR_CMD3_SHIFT 0 @@ -1241,8 +1242,8 @@ /* LTESR - Transfer Error Status Register */ #define LTESR_BM 0x80000000 -#define LTESR_FCT 0x40000000 -#define LTESR_PAR 0x20000000 +#define LTESR_FCT 0x40000000 +#define LTESR_PAR 0x20000000 #define LTESR_WP 0x04000000 #define LTESR_ATMW 0x00800000 #define LTESR_ATMR 0x00400000 diff --git a/include/mpc85xx.h b/include/mpc85xx.h index a4d99b2a165..6fbd50457c4 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -8,6 +8,7 @@ #define __MPC85xx_H__ #define EXC_OFF_SYS_RESET 0x0100 /* System reset */ +#define _START_OFFSET EXC_OFF_SYS_RESET #if defined(CONFIG_E500) #include <e500.h> diff --git a/include/mpc86xx.h b/include/mpc86xx.h index 673bfed16e9..9fd349af986 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -8,7 +8,7 @@ #define __MPC86xx_H__ #define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */ - +#define _START_OFFSET EXC_OFF_SYS_RESET /* * platform register addresses diff --git a/include/mpc8xx.h b/include/mpc8xx.h index 29117589be9..bef748f9003 100644 --- a/include/mpc8xx.h +++ b/include/mpc8xx.h @@ -35,7 +35,7 @@ * Exception offsets (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 /* System reset */ - +#define _START_OFFSET EXC_OFF_SYS_RESET /*----------------------------------------------------------------------- * SYPCR - System Protection Control Register 11-9 @@ -208,12 +208,12 @@ #define SCCR_DFBRG10 0x00001000 /* BRGCLK division by 16 */ #define SCCR_DFBRG11 0x00001800 /* BRGCLK division by 64 */ #define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */ -#define SCCR_DFNL001 0x00000100 /* Division by 4 */ -#define SCCR_DFNL010 0x00000200 /* Division by 8 */ -#define SCCR_DFNL011 0x00000300 /* Division by 16 */ -#define SCCR_DFNL100 0x00000400 /* Division by 32 */ -#define SCCR_DFNL101 0x00000500 /* Division by 64 */ -#define SCCR_DFNL110 0x00000600 /* Division by 128 */ +#define SCCR_DFNL001 0x00000100 /* Division by 4 */ +#define SCCR_DFNL010 0x00000200 /* Division by 8 */ +#define SCCR_DFNL011 0x00000300 /* Division by 16 */ +#define SCCR_DFNL100 0x00000400 /* Division by 32 */ +#define SCCR_DFNL101 0x00000500 /* Division by 64 */ +#define SCCR_DFNL110 0x00000600 /* Division by 128 */ #define SCCR_DFNL111 0x00000700 /* Division by 256 (maximum) */ #define SCCR_DFNH000 0x00000000 /* Division by 1 (default = minimum) */ #define SCCR_DFNH110 0x000000D0 /* Division by 64 (maximum) */ diff --git a/include/post.h b/include/post.h index cdefbddb6f5..8259e5d2ea6 100644 --- a/include/post.h +++ b/include/post.h @@ -91,6 +91,7 @@ extern int post_hotkeys_pressed(void); #define CFG_POST_SYSMON 0x00000800 #define CFG_POST_DSP 0x00001000 #define CFG_POST_CODEC 0x00002000 +#define CFG_POST_FPU 0x00004000 #endif /* CONFIG_POST */ diff --git a/include/ppc405.h b/include/ppc405.h index 71ad12e5159..8e64731929e 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -27,6 +27,15 @@ /*--------------------------------------------------------------------- */ #define srr2 0x3de /* save/restore register 2 */ #define srr3 0x3df /* save/restore register 3 */ + + /* + * 405 does not really have CSRR0/1 but SRR2/3 are used during critical + * exception for the exact same purposes - let's alias them and have a + * common handling in crit_return() and CRIT_EXCEPTION + */ + #define csrr0 srr2 + #define csrr1 srr3 + #define dbsr 0x3f0 /* debug status register */ #define dbcr0 0x3f2 /* debug control register 0 */ #define dbcr1 0x3bd /* debug control register 1 */ @@ -134,12 +143,12 @@ #define UIC_USBH1 0x00040000 /* USB Host 1 */ #define UIC_USBH2 0x00020000 /* USB Host 2 */ #define UIC_USBDEV 0x00010000 /* USB Device */ -#define UIC_ENET 0x00008000 /* Ethernet interrupt status */ -#define UIC_ENET1 0x00008000 /* dummy define */ +#define UIC_ENET 0x00008000 /* Ethernet interrupt status */ +#define UIC_ENET1 0x00008000 /* dummy define */ #define UIC_EMAC_WAKE 0x00004000 /* EMAC wake up */ #define UIC_MADMAL 0x00002000 /* Logical OR of following MadMAL int */ -#define UIC_MAL_SERR 0x00002000 /* MAL SERR */ +#define UIC_MAL_SERR 0x00002000 /* MAL SERR */ #define UIC_MAL_TXDE 0x00002000 /* MAL TXDE */ #define UIC_MAL_RXDE 0x00002000 /* MAL RXDE */ @@ -877,7 +886,7 @@ #define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */ #define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */ #define reset (CNTRL_DCR_BASE+0x3) /* reset register */ -#define strap (CNTRL_DCR_BASE+0x4) /* strap register */ +#define strap (CNTRL_DCR_BASE+0x4) /* strap register */ #define ecr (0xaa) /* edge conditioner register (405gpr) */ @@ -1110,13 +1119,13 @@ | UART Register Offsets '----------------------------------------------------------------------------*/ #define DATA_REG 0x00 -#define DL_LSB 0x00 -#define DL_MSB 0x01 +#define DL_LSB 0x00 +#define DL_MSB 0x01 #define INT_ENABLE 0x01 #define FIFO_CONTROL 0x02 #define LINE_CONTROL 0x03 #define MODEM_CONTROL 0x04 -#define LINE_STATUS 0x05 +#define LINE_STATUS 0x05 #define MODEM_STATUS 0x06 #define SCRATCH 0x07 diff --git a/include/ppc440.h b/include/ppc440.h index 07f75de08e6..93c10f12099 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -82,10 +82,7 @@ #define ivor13 0x19d /* interrupt vector offset register 13 */ #define ivor14 0x19e /* interrupt vector offset register 14 */ #define ivor15 0x19f /* interrupt vector offset register 15 */ -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#if defined(CONFIG_440) #define mcsrr0 0x23a /* machine check save/restore register 0 */ #define mcsrr1 0x23b /* mahcine check save/restore register 1 */ #define mcsr 0x23c /* machine check status register */ @@ -115,7 +112,7 @@ #define icdbtrh 0x39f /* instruction cache debug tag register high */ #define mmucr 0x3b2 /* mmu control register */ #define ccr0 0x3b3 /* core configuration register 0 */ -#define ccr1 0x378 /* core configuration for 440x5 only */ +#define ccr1 0x378 /* core configuration for 440x5 only */ #define icdbdr 0x3d3 /* instruction cache debug data register */ #define dbdr 0x3f3 /* debug data register */ @@ -139,7 +136,7 @@ #define clk_opbd 0x00c0 #define clk_perd 0x00e0 #define clk_mald 0x0100 -#define clk_spcid 0x0120 +#define clk_spcid 0x0120 #define clk_icfg 0x0140 /* 440gx sdr register definations */ @@ -285,6 +282,30 @@ #define sdr_sdstp3 0x4003 #endif /* CONFIG_440GX */ +/*----------------------------------------------------------------------------+ +| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only). ++----------------------------------------------------------------------------*/ +#define CCR0_PRE 0x40000000 +#define CCR0_CRPE 0x08000000 +#define CCR0_DSTG 0x00200000 +#define CCR0_DAPUIB 0x00100000 +#define CCR0_DTB 0x00008000 +#define CCR0_GICBT 0x00004000 +#define CCR0_GDCBT 0x00002000 +#define CCR0_FLSTA 0x00000100 +#define CCR0_ICSLC_MASK 0x0000000C +#define CCR0_ICSLT_MASK 0x00000003 +#define CCR1_TCS_MASK 0x00000080 +#define CCR1_TCS_INTCLK 0x00000000 +#define CCR1_TCS_EXTCLK 0x00000080 +#define MMUCR_SWOA 0x01000000 +#define MMUCR_U1TE 0x00400000 +#define MMUCR_U2SWOAE 0x00200000 +#define MMUCR_DULXE 0x00800000 +#define MMUCR_IULXE 0x00400000 +#define MMUCR_STS 0x00100000 +#define MMUCR_STID_MASK 0x000000FF + #ifdef CONFIG_440SPE #undef sdr_sdstp2 #define sdr_sdstp2 0x0022 @@ -310,30 +331,6 @@ #define sdr_sdstp6 0x4005 #define sdr_sdstp7 0x4007 -/*----------------------------------------------------------------------------+ -| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only). -+----------------------------------------------------------------------------*/ -#define CCR0_PRE 0x40000000 -#define CCR0_CRPE 0x08000000 -#define CCR0_DSTG 0x00200000 -#define CCR0_DAPUIB 0x00100000 -#define CCR0_DTB 0x00008000 -#define CCR0_GICBT 0x00004000 -#define CCR0_GDCBT 0x00002000 -#define CCR0_FLSTA 0x00000100 -#define CCR0_ICSLC_MASK 0x0000000C -#define CCR0_ICSLT_MASK 0x00000003 -#define CCR1_TCS_MASK 0x00000080 -#define CCR1_TCS_INTCLK 0x00000000 -#define CCR1_TCS_EXTCLK 0x00000080 -#define MMUCR_SEOA 0x01000000 -#define MMUCR_U1TE 0x00400000 -#define MMUCR_U2SWOAE 0x00200000 -#define MMUCR_DULXE 0x00800000 -#define MMUCR_IULXE 0x00400000 -#define MMUCR_STS 0x00100000 -#define MMUCR_STID_MASK 0x000000FF - #define SDR0_CFGADDR 0x00E #define SDR0_CFGDATA 0x00F @@ -687,8 +684,8 @@ #define SDRAM_CODT_CKSE_SINGLE_END 0x00000008 #define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004 #define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002 -#define SDRAM_CODT_IO_HIZ 0x00000000 -#define SDRAM_CODT_IO_NMODE 0x00000001 +#define SDRAM_CODT_IO_HIZ 0x00000000 +#define SDRAM_CODT_IO_NMODE 0x00000001 /*-----------------------------------------------------------------------------+ | SDRAM Mode Register @@ -956,7 +953,8 @@ #define plb1_bearl (PLB_ARBITER_BASE+ 0x0C) #define plb1_bearh (PLB_ARBITER_BASE+ 0x0D) -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* Pin Function Control Register 1 */ #define SDR0_PFC1 0x4101 #define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */ @@ -1025,7 +1023,7 @@ #endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define SDR_USB2D0CR 0x0320 +#define SDR0_USB2D0CR 0x0320 #define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC Master Selection */ #define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection */ #define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */ @@ -1103,6 +1101,8 @@ #define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */ #define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */ +#define SDR0_PFC4 0x4104 + /* USB2PHY0 Control Register */ #define SDR0_USB2PHY0CR 0x4103 #define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */ @@ -1421,7 +1421,7 @@ #define uicvr uic0vr #define uicvcr uic0vcr -#if defined(CONFIG_440SPE) +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) /*----------------------------------------------------------------------------+ | Clock / Power-on-reset DCR's. +----------------------------------------------------------------------------*/ @@ -1490,9 +1490,11 @@ #define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) #define CPR0_PERD 0xE0 +#if !defined(CONFIG_440EPX) #define CPR0_PERD_PERDV0_MASK 0x03000000 #define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) #define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) +#endif #define CPR0_MALD 0x100 #define CPR0_MALD_MALDV0_MASK 0x03000000 diff --git a/include/ppc4xx.h b/include/ppc4xx.h index 67759c7336a..ca241d2c13c 100644 --- a/include/ppc4xx.h +++ b/include/ppc4xx.h @@ -22,6 +22,8 @@ #ifndef __PPC4XX_H__ #define __PPC4XX_H__ +#define EXC_OFF_SYS_RESET 0x0100 /* System reset */ +#define _START_OFFSET (EXC_OFF_SYS_RESET + 0x2000) #if defined(CONFIG_440) #include <ppc440.h> diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 3e47e82abad..9f4029f2afc 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -113,11 +113,11 @@ #if defined(CONFIG_5xx) /* Some special purpose registers */ -#define DER 149 /* Debug Enable Register */ -#define COUNTA 150 /* Breakpoint Counter */ -#define COUNTB 151 /* Breakpoint Counter */ -#define LCTRL1 156 /* Load/Store Support */ -#define LCTRL2 157 /* Load/Store Support */ +#define DER 149 /* Debug Enable Register */ +#define COUNTA 150 /* Breakpoint Counter */ +#define COUNTB 151 /* Breakpoint Counter */ +#define LCTRL1 156 /* Load/Store Support */ +#define LCTRL2 157 /* Load/Store Support */ #define ICTRL 158 /* I-Bus Support Control Register */ #define EID 81 #endif /* CONFIG_5xx */ @@ -217,7 +217,7 @@ * We assume sprg3 has the physical address of the current * task's thread_struct. */ -#define EXCEPTION_PROLOG \ +#define EXCEPTION_PROLOG(reg1, reg2) \ mtspr SPRG0,r20; \ mtspr SPRG1,r21; \ mfcr r20; \ @@ -235,8 +235,10 @@ stw r22,_CTR(r21); \ mfspr r20,XER; \ stw r20,_XER(r21); \ - mfspr r22,SRR0; \ - mfspr r23,SRR1; \ + mfspr r20,DEAR; \ + stw r20,_DAR(r21); \ + mfspr r22,reg1; \ + mfspr r23,reg2; \ stw r0,GPR0(r21); \ stw r1,GPR1(r21); \ stw r2,GPR2(r21); \ @@ -249,41 +251,6 @@ */ /* - * Critical exception entry code. This is just like the other exception - * code except that it uses SRR2 and SRR3 instead of SRR0 and SRR1. - */ -#define CRITICAL_EXCEPTION_PROLOG \ - mtspr SPRG0,r20; \ - mtspr SPRG1,r21; \ - mfcr r20; \ - subi r21,r1,INT_FRAME_SIZE+STACK_UNDERHEAD; /* alloc exc. frame */\ - stw r20,_CCR(r21); /* save registers */ \ - stw r22,GPR22(r21); \ - stw r23,GPR23(r21); \ - mfspr r20,SPRG0; \ - stw r20,GPR20(r21); \ - mfspr r22,SPRG1; \ - stw r22,GPR21(r21); \ - mflr r20; \ - stw r20,_LINK(r21); \ - mfctr r22; \ - stw r22,_CTR(r21); \ - mfspr r20,XER; \ - stw r20,_XER(r21); \ - mfspr r22,990; /* SRR2 */ \ - mfspr r23,991; /* SRR3 */ \ - stw r0,GPR0(r21); \ - stw r1,GPR1(r21); \ - stw r2,GPR2(r21); \ - stw r1,0(r21); \ - mr r1,r21; /* set new kernel sp */ \ - SAVE_4GPRS(3, r21); -/* - * Note: code which follows this uses cr0.eq (set if from kernel), - * r21, r22 (SRR2), and r23 (SRR3). - */ - -/* * Exception vectors. * * The data words for `hdlr' and `int_return' are initialized with @@ -293,30 +260,45 @@ #define STD_EXCEPTION(n, label, hdlr) \ . = n; \ label: \ - EXCEPTION_PROLOG; \ + EXCEPTION_PROLOG(SRR0, SRR1); \ lwz r3,GOT(transfer_to_handler); \ mtlr r3; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ li r20,MSR_KERNEL; \ rlwimi r20,r23,0,25,25; \ - blrl ; \ + blrl; \ .L_ ## label : \ - .long hdlr - _start + EXC_OFF_SYS_RESET; \ - .long int_return - _start + EXC_OFF_SYS_RESET - - -#define CRIT_EXCEPTION(n, label, hdlr) \ - . = n; \ -label: \ - CRITICAL_EXCEPTION_PROLOG; \ - lwz r3,GOT(transfer_to_handler); \ - mtlr r3; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \ - rlwimi r20,r23,0,25,25; \ - blrl ; \ -.L_ ## label : \ - .long hdlr - _start + EXC_OFF_SYS_RESET; \ - .long crit_return - _start + EXC_OFF_SYS_RESET + .long hdlr - _start + _START_OFFSET; \ + .long int_return - _start + _START_OFFSET + +#define CRIT_EXCEPTION(n, label, hdlr) \ + . = n; \ +label: \ + EXCEPTION_PROLOG(CSRR0, CSRR1); \ + lwz r3,GOT(transfer_to_handler); \ + mtlr r3; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \ + rlwimi r20,r23,0,25,25; \ + blrl; \ +.L_ ## label : \ + .long hdlr - _start + _START_OFFSET; \ + .long crit_return - _start + _START_OFFSET + +#ifdef CONFIG_440 +#define MCK_EXCEPTION(n, label, hdlr) \ + . = n; \ +label: \ + EXCEPTION_PROLOG(MCSRR0, MCSRR1); \ + lwz r3,GOT(transfer_to_handler); \ + mtlr r3; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \ + rlwimi r20,r23,0,25,25; \ + blrl; \ +.L_ ## label : \ + .long hdlr - _start + _START_OFFSET; \ + .long mck_return - _start + _START_OFFSET +#endif /* CONFIG_440 */ #endif /* __PPC_ASM_TMPL__ */ diff --git a/include/sata.h b/include/sata.h new file mode 100644 index 00000000000..165b471b289 --- /dev/null +++ b/include/sata.h @@ -0,0 +1,108 @@ + +#if (DEBUG_SATA) +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +struct sata_ioports { + unsigned long cmd_addr; + unsigned long data_addr; + unsigned long error_addr; + unsigned long feature_addr; + unsigned long nsect_addr; + unsigned long lbal_addr; + unsigned long lbam_addr; + unsigned long lbah_addr; + unsigned long device_addr; + unsigned long status_addr; + unsigned long command_addr; + unsigned long altstatus_addr; + unsigned long ctl_addr; + unsigned long bmdma_addr; + unsigned long scr_addr; +}; + +struct sata_port { + unsigned char port_no; /* primary=0, secondary=1 */ + struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */ + unsigned char ctl_reg; + unsigned char last_ctl; + unsigned char port_state; /* 1-port is available and */ + /* 0-port is not available */ + unsigned char dev_mask; +}; + +/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/ +#ifdef SATA_DECL /*SATA library specific declarations */ +#define ata_id_has_lba48(id) ((id)[83] & (1 << 10)) +#define ata_id_has_lba(id) ((id)[49] & (1 << 9)) +#define ata_id_has_dma(id) ((id)[49] & (1 << 8)) +#define ata_id_u32(id,n) \ + (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) +#define ata_id_u64(id,n) \ + (((u64) (id)[(n) + 3] << 48) | \ + ((u64) (id)[(n) + 2] << 32) | \ + ((u64) (id)[(n) + 1] << 16) | \ + ((u64) (id)[(n) + 0]) ) +#endif + +#ifdef SATA_DECL /*SATA library specific declarations */ +static inline void +ata_dump_id (u16 * id) +{ + PRINTF ("49==0x%04x " + "53==0x%04x " + "63==0x%04x " + "64==0x%04x " + "75==0x%04x \n", id[49], id[53], id[63], id[64], id[75]); + PRINTF ("80==0x%04x " + "81==0x%04x " + "82==0x%04x " + "83==0x%04x " + "84==0x%04x \n", id[80], id[81], id[82], id[83], id[84]); + PRINTF ("88==0x%04x " "93==0x%04x\n", id[88], id[93]); +} +#endif + +#ifdef SATA_DECL /*SATA library specific declarations */ +int sata_bus_softreset (int num); +void sata_identify (int num, int dev); +void sata_port (struct sata_ioports *ioport); +void set_Feature_cmd (int num, int dev); +int sata_devchk (struct sata_ioports *ioaddr, int dev); +void dev_select (struct sata_ioports *ioaddr, int dev); +u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int max); +u8 sata_chk_status (struct sata_ioports *ioaddr); +ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buffer); +ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void * buffer); +void msleep (int count); +#else +extern int sata_bus_softreset (int num); +extern void sata_identify (int num, int dev); +extern void sata_port (struct sata_ioports *ioport); +extern void set_Feature_cmd (int num, int dev); +extern ulong sata_read (int device, ulong blknr, + lbaint_t blkcnt, void * buffer); +extern ulong sata_write (int device, ulong blknr, + lbaint_t blkcnt, void * buffer); +extern void msleep (int count); +#endif + +/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/ + +#ifdef DRV_DECL /*Driver specific declaration */ +int init_sata (void); +#else +extern int init_sata (void); +#endif + +#ifdef DRV_DECL /*Defines Driver Specific variables */ +struct sata_port port[CFG_SATA_MAXBUS]; +block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES]; +int curr_dev = -1; +#else +extern struct sata_port port[CFG_SATA_MAXBUS]; +extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES]; +extern int curr_dev; +#endif diff --git a/include/sha1.h b/include/sha1.h new file mode 100644 index 00000000000..15ea13cd3a7 --- /dev/null +++ b/include/sha1.h @@ -0,0 +1,115 @@ +/** + * \file sha1.h + * based from http://xyssl.org/code/source/sha1/ + * FIPS-180-1 compliant SHA-1 implementation + * + * Copyright (C) 2003-2006 Christophe Devine + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License, version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ +/* + * The SHA-1 standard was published by NIST in 1993. + * + * http://www.itl.nist.gov/fipspubs/fip180-1.htm + */ +#ifndef _SHA1_H +#define _SHA1_H + +#ifdef __cplusplus +extern "C" { +#endif + +#define SHA1_SUM_POS -0x20 +#define SHA1_SUM_LEN 20 + +/** + * \brief SHA-1 context structure + */ +typedef struct +{ + unsigned long total[2]; /*!< number of bytes processed */ + unsigned long state[5]; /*!< intermediate digest state */ + unsigned char buffer[64]; /*!< data block being processed */ +} +sha1_context; + +/** + * \brief SHA-1 context setup + * + * \param ctx SHA-1 context to be initialized + */ +void sha1_starts( sha1_context *ctx ); + +/** + * \brief SHA-1 process buffer + * + * \param ctx SHA-1 context + * \param input buffer holding the data + * \param ilen length of the input data + */ +void sha1_update( sha1_context *ctx, unsigned char *input, int ilen ); + +/** + * \brief SHA-1 final digest + * + * \param ctx SHA-1 context + * \param output SHA-1 checksum result + */ +void sha1_finish( sha1_context *ctx, unsigned char output[20] ); + +/** + * \brief Output = SHA-1( input buffer ) + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output SHA-1 checksum result + */ +void sha1_csum( unsigned char *input, int ilen, + unsigned char output[20] ); + +/** + * \brief Output = SHA-1( file contents ) + * + * \param path input file name + * \param output SHA-1 checksum result + * \return 0 if successful, or 1 if fopen failed + */ +int sha1_file( char *path, unsigned char output[20] ); + +/** + * \brief Output = HMAC-SHA-1( input buffer, hmac key ) + * + * \param key HMAC secret key + * \param keylen length of the HMAC key + * \param input buffer holding the data + * \param ilen length of the input data + * \param output HMAC-SHA-1 result + */ +void sha1_hmac( unsigned char *key, int keylen, + unsigned char *input, int ilen, + unsigned char output[20] ); + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int sha1_self_test( void ); + +#ifdef __cplusplus +} +#endif + +#endif /* sha1.h */ diff --git a/include/status_led.h b/include/status_led.h index 71a202fe36e..a6468142557 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -367,6 +367,13 @@ void status_led_set (int led, int state); #define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ +#elif defined(CONFIG_BOARD_SPECIFIC_LED) +/* led_id_t is unsigned long mask */ +typedef unsigned long led_id_t; + +extern void __led_toggle (led_id_t mask); +extern void __led_init (led_id_t mask, int state); +extern void __led_set (led_id_t mask, int state); #else # error Status LED configuration missing #endif diff --git a/lib_generic/Makefile b/lib_generic/Makefile index f012cab7d8a..b2091c5e78b 100644 --- a/lib_generic/Makefile +++ b/lib_generic/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)libgeneric.a COBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \ bzlib_randtable.o bzlib_huffman.o \ - crc32.o ctype.o display_options.o ldiv.o \ + crc32.o ctype.o display_options.o ldiv.o sha1.o \ string.o vsprintf.o zlib.o SRCS := $(COBJS:.o=.c) diff --git a/lib_generic/sha1.c b/lib_generic/sha1.c new file mode 100644 index 00000000000..08ffa6b9bac --- /dev/null +++ b/lib_generic/sha1.c @@ -0,0 +1,413 @@ +/* + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * based on: + * FIPS-180-1 compliant SHA-1 implementation + * + * Copyright (C) 2003-2006 Christophe Devine + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License, version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ +/* + * The SHA-1 standard was published by NIST in 1993. + * + * http://www.itl.nist.gov/fipspubs/fip180-1.htm + */ + +#ifndef _CRT_SECURE_NO_DEPRECATE +#define _CRT_SECURE_NO_DEPRECATE 1 +#endif + +#include <linux/string.h> +#include "sha1.h" + +/* + * 32-bit integer manipulation macros (big endian) + */ +#ifndef GET_UINT32_BE +#define GET_UINT32_BE(n,b,i) { \ + (n) = ( (unsigned long) (b)[(i) ] << 24 ) \ + | ( (unsigned long) (b)[(i) + 1] << 16 ) \ + | ( (unsigned long) (b)[(i) + 2] << 8 ) \ + | ( (unsigned long) (b)[(i) + 3] ); \ +} +#endif +#ifndef PUT_UINT32_BE +#define PUT_UINT32_BE(n,b,i) { \ + (b)[(i) ] = (unsigned char) ( (n) >> 24 ); \ + (b)[(i) + 1] = (unsigned char) ( (n) >> 16 ); \ + (b)[(i) + 2] = (unsigned char) ( (n) >> 8 ); \ + (b)[(i) + 3] = (unsigned char) ( (n) ); \ +} +#endif + +/* + * SHA-1 context setup + */ +void sha1_starts (sha1_context * ctx) +{ + ctx->total[0] = 0; + ctx->total[1] = 0; + + ctx->state[0] = 0x67452301; + ctx->state[1] = 0xEFCDAB89; + ctx->state[2] = 0x98BADCFE; + ctx->state[3] = 0x10325476; + ctx->state[4] = 0xC3D2E1F0; +} + +static void sha1_process (sha1_context * ctx, unsigned char data[64]) +{ + unsigned long temp, W[16], A, B, C, D, E; + + GET_UINT32_BE (W[0], data, 0); + GET_UINT32_BE (W[1], data, 4); + GET_UINT32_BE (W[2], data, 8); + GET_UINT32_BE (W[3], data, 12); + GET_UINT32_BE (W[4], data, 16); + GET_UINT32_BE (W[5], data, 20); + GET_UINT32_BE (W[6], data, 24); + GET_UINT32_BE (W[7], data, 28); + GET_UINT32_BE (W[8], data, 32); + GET_UINT32_BE (W[9], data, 36); + GET_UINT32_BE (W[10], data, 40); + GET_UINT32_BE (W[11], data, 44); + GET_UINT32_BE (W[12], data, 48); + GET_UINT32_BE (W[13], data, 52); + GET_UINT32_BE (W[14], data, 56); + GET_UINT32_BE (W[15], data, 60); + +#define S(x,n) ((x << n) | ((x & 0xFFFFFFFF) >> (32 - n))) + +#define R(t) ( \ + temp = W[(t - 3) & 0x0F] ^ W[(t - 8) & 0x0F] ^ \ + W[(t - 14) & 0x0F] ^ W[ t & 0x0F], \ + ( W[t & 0x0F] = S(temp,1) ) \ +) + +#define P(a,b,c,d,e,x) { \ + e += S(a,5) + F(b,c,d) + K + x; b = S(b,30); \ +} + + A = ctx->state[0]; + B = ctx->state[1]; + C = ctx->state[2]; + D = ctx->state[3]; + E = ctx->state[4]; + +#define F(x,y,z) (z ^ (x & (y ^ z))) +#define K 0x5A827999 + + P (A, B, C, D, E, W[0]); + P (E, A, B, C, D, W[1]); + P (D, E, A, B, C, W[2]); + P (C, D, E, A, B, W[3]); + P (B, C, D, E, A, W[4]); + P (A, B, C, D, E, W[5]); + P (E, A, B, C, D, W[6]); + P (D, E, A, B, C, W[7]); + P (C, D, E, A, B, W[8]); + P (B, C, D, E, A, W[9]); + P (A, B, C, D, E, W[10]); + P (E, A, B, C, D, W[11]); + P (D, E, A, B, C, W[12]); + P (C, D, E, A, B, W[13]); + P (B, C, D, E, A, W[14]); + P (A, B, C, D, E, W[15]); + P (E, A, B, C, D, R (16)); + P (D, E, A, B, C, R (17)); + P (C, D, E, A, B, R (18)); + P (B, C, D, E, A, R (19)); + +#undef K +#undef F + +#define F(x,y,z) (x ^ y ^ z) +#define K 0x6ED9EBA1 + + P (A, B, C, D, E, R (20)); + P (E, A, B, C, D, R (21)); + P (D, E, A, B, C, R (22)); + P (C, D, E, A, B, R (23)); + P (B, C, D, E, A, R (24)); + P (A, B, C, D, E, R (25)); + P (E, A, B, C, D, R (26)); + P (D, E, A, B, C, R (27)); + P (C, D, E, A, B, R (28)); + P (B, C, D, E, A, R (29)); + P (A, B, C, D, E, R (30)); + P (E, A, B, C, D, R (31)); + P (D, E, A, B, C, R (32)); + P (C, D, E, A, B, R (33)); + P (B, C, D, E, A, R (34)); + P (A, B, C, D, E, R (35)); + P (E, A, B, C, D, R (36)); + P (D, E, A, B, C, R (37)); + P (C, D, E, A, B, R (38)); + P (B, C, D, E, A, R (39)); + +#undef K +#undef F + +#define F(x,y,z) ((x & y) | (z & (x | y))) +#define K 0x8F1BBCDC + + P (A, B, C, D, E, R (40)); + P (E, A, B, C, D, R (41)); + P (D, E, A, B, C, R (42)); + P (C, D, E, A, B, R (43)); + P (B, C, D, E, A, R (44)); + P (A, B, C, D, E, R (45)); + P (E, A, B, C, D, R (46)); + P (D, E, A, B, C, R (47)); + P (C, D, E, A, B, R (48)); + P (B, C, D, E, A, R (49)); + P (A, B, C, D, E, R (50)); + P (E, A, B, C, D, R (51)); + P (D, E, A, B, C, R (52)); + P (C, D, E, A, B, R (53)); + P (B, C, D, E, A, R (54)); + P (A, B, C, D, E, R (55)); + P (E, A, B, C, D, R (56)); + P (D, E, A, B, C, R (57)); + P (C, D, E, A, B, R (58)); + P (B, C, D, E, A, R (59)); + +#undef K +#undef F + +#define F(x,y,z) (x ^ y ^ z) +#define K 0xCA62C1D6 + + P (A, B, C, D, E, R (60)); + P (E, A, B, C, D, R (61)); + P (D, E, A, B, C, R (62)); + P (C, D, E, A, B, R (63)); + P (B, C, D, E, A, R (64)); + P (A, B, C, D, E, R (65)); + P (E, A, B, C, D, R (66)); + P (D, E, A, B, C, R (67)); + P (C, D, E, A, B, R (68)); + P (B, C, D, E, A, R (69)); + P (A, B, C, D, E, R (70)); + P (E, A, B, C, D, R (71)); + P (D, E, A, B, C, R (72)); + P (C, D, E, A, B, R (73)); + P (B, C, D, E, A, R (74)); + P (A, B, C, D, E, R (75)); + P (E, A, B, C, D, R (76)); + P (D, E, A, B, C, R (77)); + P (C, D, E, A, B, R (78)); + P (B, C, D, E, A, R (79)); + +#undef K +#undef F + + ctx->state[0] += A; + ctx->state[1] += B; + ctx->state[2] += C; + ctx->state[3] += D; + ctx->state[4] += E; +} + +/* + * SHA-1 process buffer + */ +void sha1_update (sha1_context * ctx, unsigned char *input, int ilen) +{ + int fill; + unsigned long left; + + if (ilen <= 0) + return; + + left = ctx->total[0] & 0x3F; + fill = 64 - left; + + ctx->total[0] += ilen; + ctx->total[0] &= 0xFFFFFFFF; + + if (ctx->total[0] < (unsigned long) ilen) + ctx->total[1]++; + + if (left && ilen >= fill) { + memcpy ((void *) (ctx->buffer + left), (void *) input, fill); + sha1_process (ctx, ctx->buffer); + input += fill; + ilen -= fill; + left = 0; + } + + while (ilen >= 64) { + sha1_process (ctx, input); + input += 64; + ilen -= 64; + } + + if (ilen > 0) { + memcpy ((void *) (ctx->buffer + left), (void *) input, ilen); + } +} + +static const unsigned char sha1_padding[64] = { + 0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* + * SHA-1 final digest + */ +void sha1_finish (sha1_context * ctx, unsigned char output[20]) +{ + unsigned long last, padn; + unsigned long high, low; + unsigned char msglen[8]; + + high = (ctx->total[0] >> 29) + | (ctx->total[1] << 3); + low = (ctx->total[0] << 3); + + PUT_UINT32_BE (high, msglen, 0); + PUT_UINT32_BE (low, msglen, 4); + + last = ctx->total[0] & 0x3F; + padn = (last < 56) ? (56 - last) : (120 - last); + + sha1_update (ctx, (unsigned char *) sha1_padding, padn); + sha1_update (ctx, msglen, 8); + + PUT_UINT32_BE (ctx->state[0], output, 0); + PUT_UINT32_BE (ctx->state[1], output, 4); + PUT_UINT32_BE (ctx->state[2], output, 8); + PUT_UINT32_BE (ctx->state[3], output, 12); + PUT_UINT32_BE (ctx->state[4], output, 16); +} + +/* + * Output = SHA-1( input buffer ) + */ +void sha1_csum (unsigned char *input, int ilen, unsigned char output[20]) +{ + sha1_context ctx; + + sha1_starts (&ctx); + sha1_update (&ctx, input, ilen); + sha1_finish (&ctx, output); +} + +/* + * Output = HMAC-SHA-1( input buffer, hmac key ) + */ +void sha1_hmac (unsigned char *key, int keylen, + unsigned char *input, int ilen, unsigned char output[20]) +{ + int i; + sha1_context ctx; + unsigned char k_ipad[64]; + unsigned char k_opad[64]; + unsigned char tmpbuf[20]; + + memset (k_ipad, 0x36, 64); + memset (k_opad, 0x5C, 64); + + for (i = 0; i < keylen; i++) { + if (i >= 64) + break; + + k_ipad[i] ^= key[i]; + k_opad[i] ^= key[i]; + } + + sha1_starts (&ctx); + sha1_update (&ctx, k_ipad, 64); + sha1_update (&ctx, input, ilen); + sha1_finish (&ctx, tmpbuf); + + sha1_starts (&ctx); + sha1_update (&ctx, k_opad, 64); + sha1_update (&ctx, tmpbuf, 20); + sha1_finish (&ctx, output); + + memset (k_ipad, 0, 64); + memset (k_opad, 0, 64); + memset (tmpbuf, 0, 20); + memset (&ctx, 0, sizeof (sha1_context)); +} + +static const char _sha1_src[] = "_sha1_src"; + +#ifdef SELF_TEST +/* + * FIPS-180-1 test vectors + */ +static const char sha1_test_str[3][57] = { + {"abc"}, + {"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq"}, + {""} +}; + +static const unsigned char sha1_test_sum[3][20] = { + {0xA9, 0x99, 0x3E, 0x36, 0x47, 0x06, 0x81, 0x6A, 0xBA, 0x3E, + 0x25, 0x71, 0x78, 0x50, 0xC2, 0x6C, 0x9C, 0xD0, 0xD8, 0x9D}, + {0x84, 0x98, 0x3E, 0x44, 0x1C, 0x3B, 0xD2, 0x6E, 0xBA, 0xAE, + 0x4A, 0xA1, 0xF9, 0x51, 0x29, 0xE5, 0xE5, 0x46, 0x70, 0xF1}, + {0x34, 0xAA, 0x97, 0x3C, 0xD4, 0xC4, 0xDA, 0xA4, 0xF6, 0x1E, + 0xEB, 0x2B, 0xDB, 0xAD, 0x27, 0x31, 0x65, 0x34, 0x01, 0x6F} +}; + +/* + * Checkup routine + */ +int sha1_self_test (void) +{ + int i, j; + unsigned char buf[1000]; + unsigned char sha1sum[20]; + sha1_context ctx; + + for (i = 0; i < 3; i++) { + printf (" SHA-1 test #%d: ", i + 1); + + sha1_starts (&ctx); + + if (i < 2) + sha1_update (&ctx, (unsigned char *) sha1_test_str[i], + strlen (sha1_test_str[i])); + else { + memset (buf, 'a', 1000); + for (j = 0; j < 1000; j++) + sha1_update (&ctx, buf, 1000); + } + + sha1_finish (&ctx, sha1sum); + + if (memcmp (sha1sum, sha1_test_sum[i], 20) != 0) { + printf ("failed\n"); + return (1); + } + + printf ("passed\n"); + } + + printf ("\n"); + return (0); +} +#else +int sha1_self_test (void) +{ + return (0); +} +#endif diff --git a/lib_ppc/board.c b/lib_ppc/board.c index c4fc5805ab6..f5d18fa9f6b 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -896,7 +896,8 @@ void board_init_r (gd_t *id, ulong dest_addr) #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \ defined(CONFIG_TQM8272) || \ - defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) + defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \ + defined(CONFIG_KUP4X) || defined(CONFIG_PCS440EP) load_sernum_ethaddr (); #endif /* IP Address */ @@ -961,7 +962,7 @@ void board_init_r (gd_t *id, ulong dest_addr) serial_buffered_init(); #endif -#ifdef CONFIG_STATUS_LED +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); #endif diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c index b14d661bbea..8354411f01f 100644 --- a/lib_ppc/extable.c +++ b/lib_ppc/extable.c @@ -52,30 +52,27 @@ search_one_table(const struct exception_table_entry *first, const struct exception_table_entry *last, unsigned long value) { - while (first <= last) { - const struct exception_table_entry *mid; - long diff; - - mid = (last - first) / 2 + first; - if ((ulong) mid > CFG_MONITOR_BASE) { - /* exception occurs in FLASH, before u-boot relocation. - * No relocation offset is needed. - */ - diff = mid->insn - value; + long diff; + if ((ulong) first > CFG_MONITOR_BASE) { + /* exception occurs in FLASH, before u-boot relocation. + * No relocation offset is needed. + */ + while (first <= last) { + diff = first->insn - value; if (diff == 0) - return mid->fixup; - } else { - /* exception occurs in RAM, after u-boot relocation. - * A relocation offset should be added. - */ - diff = (mid->insn + gd->reloc_off) - value; + return first->fixup; + first++; + } + } else { + /* exception occurs in RAM, after u-boot relocation. + * A relocation offset should be added. + */ + while (first <= last) { + diff = (first->insn + gd->reloc_off) - value; if (diff == 0) - return (mid->fixup + gd->reloc_off); + return (first->fixup + gd->reloc_off); + first++; } - if (diff < 0) - first = mid + 1; - else - last = mid - 1; } return 0; } diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile index 0d6828a76fb..926476f91b0 100644 --- a/nand_spl/board/amcc/acadia/Makefile +++ b/nand_spl/board/amcc/acadia/Makefile @@ -30,7 +30,7 @@ AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL SOBJS = start.o resetvec.o -COBJS = gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o +COBJS = gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o pll.o SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -39,7 +39,8 @@ LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) nandobj := $(OBJTREE)/nand_spl/ -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin \ + $(nandobj)System.map all: $(obj).depend $(ALL) @@ -54,6 +55,11 @@ $(nandobj)u-boot-spl: $(OBJS) -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)System.map: $(nandobj)u-boot-spl + @$(NM) $< | \ + grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ + sort > $(nandobj)System.map + # create symbolic links for common files # from cpu directory @@ -78,6 +84,10 @@ $(obj)memory.c: @rm -f $(obj)memory.c ln -s $(SRCTREE)/board/amcc/acadia/memory.c $(obj)memory.c +$(obj)pll.c: + @rm -f $(obj)pll.c + ln -s $(SRCTREE)/board/amcc/acadia/pll.c $(obj)pll.c + # from nand_spl directory $(obj)nand_boot.c: @rm -f $(obj)nand_boot.c diff --git a/nand_spl/board/amcc/acadia/config.mk b/nand_spl/board/amcc/acadia/config.mk index 55069b4dfea..3b140fa7e8d 100644 --- a/nand_spl/board/amcc/acadia/config.mk +++ b/nand_spl/board/amcc/acadia/config.mk @@ -32,11 +32,11 @@ # We will copy this SPL into internal SRAM in start.S. So we set # TEXT_BASE to starting address in internal SRAM here. # -TEXT_BASE = 0xF8003000 +TEXT_BASE = 0xf8004000 # PAD_TO used to generate a 16kByte binary needed for the combined image # -> PAD_TO = TEXT_BASE + 0x4000 -PAD_TO = 0xF8007000 +PAD_TO = 0xf8008000 ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG diff --git a/nand_spl/board/amcc/acadia/u-boot.lds b/nand_spl/board/amcc/acadia/u-boot.lds index 018def1faba..a07a773e011 100644 --- a/nand_spl/board/amcc/acadia/u-boot.lds +++ b/nand_spl/board/amcc/acadia/u-boot.lds @@ -24,7 +24,7 @@ OUTPUT_ARCH(powerpc:common) SECTIONS { - .resetvec 0xF8003FFC : + .resetvec 0xf8004ffc : { *(.resetvec) } = 0xffff diff --git a/net/eth.c b/net/eth.c index 4394b63de23..a8709f24401 100644 --- a/net/eth.c +++ b/net/eth.c @@ -28,6 +28,14 @@ #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_SHOW_BOOT_PROGRESS) +# include <status_led.h> +extern void show_ethcfg_progress (int arg); +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif + #ifdef CFG_GT_6426x extern int gt6426x_eth_initialize(bd_t *bis); #endif @@ -143,6 +151,7 @@ int eth_initialize(bd_t *bis) eth_devices = NULL; eth_current = NULL; + SHOW_BOOT_PROGRESS(64); #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) miiphy_init(); #endif @@ -174,28 +183,20 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_SK98) skge_initialize(bis); #endif -#if defined(CONFIG_MPC85XX_TSEC1) - tsec_initialize(bis, 0, CONFIG_MPC85XX_TSEC1_NAME); -#elif defined(CONFIG_MPC83XX_TSEC1) - tsec_initialize(bis, 0, CONFIG_MPC83XX_TSEC1_NAME); +#if defined(CONFIG_TSEC1) + tsec_initialize(bis, 0, CONFIG_TSEC1_NAME); #endif -#if defined(CONFIG_MPC85XX_TSEC2) - tsec_initialize(bis, 1, CONFIG_MPC85XX_TSEC2_NAME); -#elif defined(CONFIG_MPC83XX_TSEC2) - tsec_initialize(bis, 1, CONFIG_MPC83XX_TSEC2_NAME); +#if defined(CONFIG_TSEC2) + tsec_initialize(bis, 1, CONFIG_TSEC2_NAME); #endif #if defined(CONFIG_MPC85XX_FEC) tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME); #else -# if defined(CONFIG_MPC85XX_TSEC3) - tsec_initialize(bis, 2, CONFIG_MPC85XX_TSEC3_NAME); -# elif defined(CONFIG_MPC83XX_TSEC3) - tsec_initialize(bis, 2, CONFIG_MPC83XX_TSEC3_NAME); +# if defined(CONFIG_TSEC3) + tsec_initialize(bis, 2, CONFIG_TSEC3_NAME); # endif -# if defined(CONFIG_MPC85XX_TSEC4) - tsec_initialize(bis, 3, CONFIG_MPC85XX_TSEC4_NAME); -# elif defined(CONFIG_MPC83XX_TSEC4) - tsec_initialize(bis, 3, CONFIG_MPC83XX_TSEC4_NAME); +# if defined(CONFIG_TSEC4) + tsec_initialize(bis, 3, CONFIG_TSEC4_NAME); # endif #endif #if defined(CONFIG_UEC_ETH1) @@ -204,21 +205,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_UEC_ETH2) uec_initialize(1); #endif -#if defined(CONFIG_MPC86XX_TSEC1) - tsec_initialize(bis, 0, CONFIG_MPC86XX_TSEC1_NAME); -#endif - -#if defined(CONFIG_MPC86XX_TSEC2) - tsec_initialize(bis, 1, CONFIG_MPC86XX_TSEC2_NAME); -#endif - -#if defined(CONFIG_MPC86XX_TSEC3) - tsec_initialize(bis, 2, CONFIG_MPC86XX_TSEC3_NAME); -#endif - -#if defined(CONFIG_MPC86XX_TSEC4) - tsec_initialize(bis, 3, CONFIG_MPC86XX_TSEC4_NAME); -#endif #if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC) fec_initialize(bis); @@ -274,10 +260,12 @@ int eth_initialize(bd_t *bis) if (!eth_devices) { puts ("No ethernet found.\n"); + SHOW_BOOT_PROGRESS(-64); } else { struct eth_device *dev = eth_devices; char *ethprime = getenv ("ethprime"); + SHOW_BOOT_PROGRESS(65); do { if (eth_number) puts (", "); diff --git a/post/cpu/mpc8xx/Makefile b/post/cpu/mpc8xx/Makefile index 9dd3f0fce9b..f871cbab649 100644 --- a/post/cpu/mpc8xx/Makefile +++ b/post/cpu/mpc8xx/Makefile @@ -24,6 +24,6 @@ LIB = libpostmpc8xx.a AOBJS = cache_8xx.o -COBJS = ether.o spr.o uart.o usb.o watchdog.o +COBJS = cache.o ether.o spr.o uart.o usb.o watchdog.o include $(TOPDIR)/post/rules.mk diff --git a/post/drivers/cache.c b/post/cpu/mpc8xx/cache.c index 501465c06a1..501465c06a1 100644 --- a/post/drivers/cache.c +++ b/post/cpu/mpc8xx/cache.c diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile new file mode 100644 index 00000000000..f1034dac249 --- /dev/null +++ b/post/cpu/ppc4xx/Makefile @@ -0,0 +1,29 @@ +# +# (C) Copyright 2002-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +LIB = libpostppc4xx.a + +AOBJS = cache_4xx.o +COBJS = cache.o ether.o fpu.o spr.o uart.o watchdog.o + +include $(TOPDIR)/post/rules.mk diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c new file mode 100644 index 00000000000..e1f989ed937 --- /dev/null +++ b/post/cpu/ppc4xx/cache.c @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin <igor@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* Cache test + * + * This test verifies the CPU data and instruction cache using + * several test scenarios. + */ + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_CACHE + +#include <asm/mmu.h> +#include <watchdog.h> + +#define CACHE_POST_SIZE 1024 + +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); + +int cache_post_test1 (int tlb, void *p, int size); +int cache_post_test2 (int tlb, void *p, int size); +int cache_post_test3 (int tlb, void *p, int size); +int cache_post_test4 (int tlb, void *p, int size); +int cache_post_test5 (int tlb, void *p, int size); +int cache_post_test6 (int tlb, void *p, int size); + +static int tlb = -1; /* index to the victim TLB entry */ + +static unsigned char testarea[CACHE_POST_SIZE] +__attribute__((__aligned__(CACHE_POST_SIZE))); + +int cache_post_test (int flags) +{ + void* virt = (void*)CFG_POST_CACHE_ADDR; + int ints, i, res = 0; + u32 word0; + + if (tlb < 0) { + /* + * Allocate a new TLB entry, since we are going to modify + * the write-through and caching inhibited storage attributes. + */ + program_tlb((u32)testarea, (u32)virt, + CACHE_POST_SIZE, TLB_WORD2_I_ENABLE); + + /* Find the TLB entry */ + for (i = 0;; i++) { + if (i >= PPC4XX_TLB_SIZE) { + printf ("Failed to program tlb entry\n"); + return -1; + } + word0 = mftlb1(i); + if (TLB_WORD0_EPN_DECODE(word0) == (u32)virt) { + tlb = i; + break; + } + } + } + ints = disable_interrupts (); + + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test1 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test2 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test3 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test4 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test5 (tlb, virt, CACHE_POST_SIZE); + WATCHDOG_RESET (); + if (res == 0) + res = cache_post_test6 (tlb, virt, CACHE_POST_SIZE); + + if (ints) + enable_interrupts (); + + return res; +} + +#endif /* CONFIG_POST & CFG_POST_CACHE */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/cache_4xx.S b/post/cpu/ppc4xx/cache_4xx.S new file mode 100644 index 00000000000..dddd76b2355 --- /dev/null +++ b/post/cpu/ppc4xx/cache_4xx.S @@ -0,0 +1,448 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin <igor@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +#ifdef CONFIG_POST + +#include <post.h> +#include <ppc_asm.tmpl> +#include <ppc_defs.h> +#include <asm/cache.h> +#include <asm/mmu.h> + +#if CONFIG_POST & CFG_POST_CACHE + + .text + +/* void cache_post_disable (int tlb) + */ +cache_post_disable: + tlbre r0, r3, 0x0002 + ori r0, r0, TLB_WORD2_I_ENABLE@l + tlbwe r0, r3, 0x0002 + sync + isync + blr + +/* void cache_post_wt (int tlb) + */ +cache_post_wt: + tlbre r0, r3, 0x0002 + ori r0, r0, TLB_WORD2_W_ENABLE@l + andi. r0, r0, ~TLB_WORD2_I_ENABLE@l + tlbwe r0, r3, 0x0002 + sync + isync + blr + +/* void cache_post_wb (int tlb) + */ +cache_post_wb: + tlbre r0, r3, 0x0002 + andi. r0, r0, ~TLB_WORD2_W_ENABLE@l + andi. r0, r0, ~TLB_WORD2_I_ENABLE@l + tlbwe r0, r3, 0x0002 + sync + isync + blr + +/* void cache_post_dinvalidate (void *p, int size) + */ +cache_post_dinvalidate: + dcbi r0, r3 + addi r3, r3, CFG_CACHELINE_SIZE + subic. r4, r4, CFG_CACHELINE_SIZE + bgt cache_post_dinvalidate + sync + blr + +/* void cache_post_dstore (void *p, int size) + */ +cache_post_dstore: + dcbst r0, r3 + addi r3, r3, CFG_CACHELINE_SIZE + subic. r4, r4, CFG_CACHELINE_SIZE + bgt cache_post_dstore + sync + blr + +/* void cache_post_dtouch (void *p, int size) + */ +cache_post_dtouch: + dcbt r0, r3 + addi r3, r3, CFG_CACHELINE_SIZE + subic. r4, r4, CFG_CACHELINE_SIZE + bgt cache_post_dtouch + sync + blr + +/* void cache_post_iinvalidate (void) + */ +cache_post_iinvalidate: + iccci r0, r0 + sync + blr + +/* void cache_post_memset (void *p, int val, int size) + */ +cache_post_memset: + mtctr r5 +1: + stb r4, 0(r3) + addi r3, r3, 1 + bdnz 1b + blr + +/* int cache_post_check (void *p, int size) + */ +cache_post_check: + mtctr r4 +1: + lbz r0, 0(r3) + addi r3, r3, 1 + cmpwi r0, 0xff + bne 2f + bdnz 1b + li r3, 0 + blr +2: + li r3, -1 + blr + +#define CACHE_POST_DISABLE() \ + mr r3, r10; \ + bl cache_post_disable + +#define CACHE_POST_WT() \ + mr r3, r10; \ + bl cache_post_wt + +#define CACHE_POST_WB() \ + mr r3, r10; \ + bl cache_post_wb + +#define CACHE_POST_DINVALIDATE() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_dinvalidate + +#define CACHE_POST_DFLUSH() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_dflush + +#define CACHE_POST_DSTORE() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_dstore + +#define CACHE_POST_DTOUCH() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_dtouch + +#define CACHE_POST_IINVALIDATE() \ + bl cache_post_iinvalidate + +#define CACHE_POST_MEMSET(val) \ + mr r3, r11; \ + li r4, val; \ + mr r5, r12; \ + bl cache_post_memset + +#define CACHE_POST_CHECK() \ + mr r3, r11; \ + mr r4, r12; \ + bl cache_post_check; \ + mr r13, r3 + +/* + * Write and read 0xff pattern with caching enabled. + */ + .global cache_post_test1 +cache_post_test1: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WB() + CACHE_POST_DINVALIDATE() + + /* Write the negative pattern to the test area */ + CACHE_POST_MEMSET(0xff) + + /* Read the test area */ + CACHE_POST_CHECK() + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + mr r3, r13 + mtlr r9 + blr + +/* + * Write zeroes with caching enabled. + * Write 0xff pattern with caching disabled. + * Read 0xff pattern with caching enabled. + */ + .global cache_post_test2 +cache_post_test2: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WB() + CACHE_POST_DINVALIDATE() + + /* Write the zero pattern to the test area */ + CACHE_POST_MEMSET(0) + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + /* Write the negative pattern to the test area */ + CACHE_POST_MEMSET(0xff) + + CACHE_POST_WB() + + /* Read the test area */ + CACHE_POST_CHECK() + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + mr r3, r13 + mtlr r9 + blr + +/* + * Write-through mode test. + * Write zeroes, store the cache, write 0xff pattern. + * Invalidate the cache. + * Check that 0xff pattern is read. + */ + .global cache_post_test3 +cache_post_test3: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WT() + CACHE_POST_DINVALIDATE() + + /* Cache the test area */ + CACHE_POST_DTOUCH() + + /* Write the zero pattern to the test area */ + CACHE_POST_MEMSET(0) + + CACHE_POST_DSTORE() + + /* Write the negative pattern to the test area */ + CACHE_POST_MEMSET(0xff) + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + /* Read the test area */ + CACHE_POST_CHECK() + + mr r3, r13 + mtlr r9 + blr + +/* + * Write-back mode test. + * Write 0xff pattern, store the cache, write zeroes. + * Invalidate the cache. + * Check that 0xff pattern is read. + */ + .global cache_post_test4 +cache_post_test4: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WB() + CACHE_POST_DINVALIDATE() + + /* Cache the test area */ + CACHE_POST_DTOUCH() + + /* Write the negative pattern to the test area */ + CACHE_POST_MEMSET(0xff) + + CACHE_POST_DSTORE() + + /* Write the zero pattern to the test area */ + CACHE_POST_MEMSET(0) + + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + /* Read the test area */ + CACHE_POST_CHECK() + + mr r3, r13 + mtlr r9 + blr + +/* + * Load the test instructions into the instruction cache. + * Replace the test instructions. + * Check that the original instructions are executed. + */ + .global cache_post_test5 +cache_post_test5: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WT() + CACHE_POST_IINVALIDATE() + + /* Compute r13 = cache_post_test_inst */ + bl cache_post_test5_reloc +cache_post_test5_reloc: + mflr r13 + lis r0, (cache_post_test_inst - cache_post_test5_reloc)@h + ori r0, r0, (cache_post_test_inst - cache_post_test5_reloc)@l + add r13, r13, r0 + + /* Copy the test instructions to the test area */ + lwz r0, 0(r13) + stw r0, 0(r11) + lwz r0, 8(r13) + stw r0, 4(r11) + sync + + /* Invalidate the cache line */ + icbi r0, r11 + sync + isync + + /* Execute the test instructions */ + mtlr r11 + blrl + + /* Replace the test instruction */ + lwz r0, 4(r13) + stw r0, 0(r11) + sync + + /* Do not invalidate the cache line */ + isync + + /* Execute the test instructions */ + mtlr r11 + blrl + mr r13, r3 + + CACHE_POST_IINVALIDATE() + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + mr r3, r13 + mtlr r9 + blr + +/* + * Load the test instructions into the instruction cache. + * Replace the test instructions and invalidate the cache. + * Check that the replaced instructions are executed. + */ + .global cache_post_test6 +cache_post_test6: + mflr r9 + mr r10, r3 /* tlb */ + mr r11, r4 /* p */ + mr r12, r5 /* size */ + + CACHE_POST_WT() + CACHE_POST_IINVALIDATE() + + /* Compute r13 = cache_post_test_inst */ + bl cache_post_test6_reloc +cache_post_test6_reloc: + mflr r13 + lis r0, (cache_post_test_inst - cache_post_test6_reloc)@h + ori r0, r0, (cache_post_test_inst - cache_post_test6_reloc)@l + add r13, r13, r0 + + /* Copy the test instructions to the test area */ + lwz r0, 4(r13) + stw r0, 0(r11) + lwz r0, 8(r13) + stw r0, 4(r11) + sync + + /* Invalidate the cache line */ + icbi r0, r11 + sync + isync + + /* Execute the test instructions */ + mtlr r11 + blrl + + /* Replace the test instruction */ + lwz r0, 0(r13) + stw r0, 0(r11) + sync + + /* Invalidate the cache line */ + icbi r0, r11 + sync + isync + + /* Execute the test instructions */ + mtlr r11 + blrl + mr r13, r3 + + CACHE_POST_IINVALIDATE() + CACHE_POST_DINVALIDATE() + CACHE_POST_DISABLE() + + mr r3, r13 + mtlr r9 + blr + +/* Test instructions. + */ +cache_post_test_inst: + li r3, 0 + li r3, -1 + blr + +#endif /* CONFIG_POST & CFG_POST_CACHE */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c new file mode 100644 index 00000000000..391c815d7ae --- /dev/null +++ b/post/cpu/ppc4xx/ether.c @@ -0,0 +1,395 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin <igor@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* + * Ethernet test + * + * The Ethernet Media Access Controllers (EMAC) are tested in the + * internal loopback mode. + * The controllers are configured accordingly and several packets + * are transmitted. The configurable test parameters are: + * MIN_PACKET_LENGTH - minimum size of packet to transmit + * MAX_PACKET_LENGTH - maximum size of packet to transmit + * TEST_NUM - number of tests + */ + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_ETHER + +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <405_mal.h> +#include <ppc4xx_enet.h> +#include <malloc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) +#endif + +#define MIN_PACKET_LENGTH 64 +#define MAX_PACKET_LENGTH 256 +#define TEST_NUM 1 + +static volatile mal_desc_t tx __cacheline_aligned; +static volatile mal_desc_t rx __cacheline_aligned; +static char *tx_buf; +static char *rx_buf; + +static void ether_post_init (int devnum, int hw_addr) +{ + int i; + unsigned mode_reg; +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + sys_info_t sysinfo; +#endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE) + unsigned long mfr; +#endif + +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + /* Need to get the OPB frequency so we can access the PHY */ + get_sys_info (&sysinfo); +#endif + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + /* provide clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum); + mtsdr (sdr_mfr, mfr); + sync (); +#endif + /* reset emac */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST); + sync (); + + for (i = 0;; i++) { + if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST)) + break; + if (i >= 1000) { + printf ("Timeout resetting EMAC\n"); + break; + } + udelay (1000); + } +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + /* Whack the M1 register */ + mode_reg = 0x0; + if (sysinfo.freqOPB <= 50000000); + else if (sysinfo.freqOPB <= 66666667) + mode_reg |= EMAC_M1_OBCI_66; + else if (sysinfo.freqOPB <= 83333333) + mode_reg |= EMAC_M1_OBCI_83; + else if (sysinfo.freqOPB <= 100000000) + mode_reg |= EMAC_M1_OBCI_100; + else + mode_reg |= EMAC_M1_OBCI_GT100; + + out32 (EMAC_M1 + hw_addr, mode_reg); + +#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ + + /* set the Mal configuration reg */ +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) + mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | + MAL_CR_PLBLT_DEFAULT | 0x00330000); +#else + mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); + /* Errata 1.12: MAL_1 -- Disable MAL bursting */ + if (get_pvr() == PVR_440GP_RB) { + mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB); + } +#endif + /* setup buffer descriptors */ + tx.ctrl = MAL_TX_CTRL_WRAP; + tx.data_len = 0; + tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf); + + rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY; + rx.data_len = 0; + rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf); + + switch (devnum) { + case 1: + /* setup MAL tx & rx channel pointers */ +#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) + mtdcr (maltxctp2r, &tx); +#else + mtdcr (maltxctp1r, &tx); +#endif +#if defined(CONFIG_440) + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); +#endif + mtdcr (malrxctp1r, &rx); + /* set RX buffer size */ + mtdcr (malrcbs1, PKTSIZE_ALIGN / 16); + break; + case 0: + default: + /* setup MAL tx & rx channel pointers */ +#if defined(CONFIG_440) + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); +#endif + mtdcr (maltxctp0r, &tx); + mtdcr (malrxctp0r, &rx); + /* set RX buffer size */ + mtdcr (malrcbs0, PKTSIZE_ALIGN / 16); + break; + } + + /* Enable MAL transmit and receive channels */ +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2))); +#else + mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum)); +#endif + mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum)); + + /* set internal loopback mode */ + out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE | + EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | + EMAC_M1_MF_100MBPS | EMAC_M1_IST | + in32 (EMAC_M1)); + + /* set transmit enable & receive enable */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); + + /* enable broadcast address */ + out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE); + + /* set transmit request threshold register */ + out32 (EMAC_TRTR + hw_addr, 0x18000000); /* 256 byte threshold */ + + /* set receive low/high water mark register */ +#if defined(CONFIG_440) + /* 440s has a 64 byte burst length */ + out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000); +#else + /* 405s have a 16 byte burst length */ + out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000); +#endif /* defined(CONFIG_440) */ + out32 (EMAC_TXM1 + hw_addr, 0xf8640000); + + /* Set fifo limit entry in tx mode 0 */ + out32 (EMAC_TXM0 + hw_addr, 0x00000003); + /* Frame gap set */ + out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008); + sync (); +} + +static void ether_post_halt (int devnum, int hw_addr) +{ + int i = 0; +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + unsigned long mfr; +#endif + + /* 1st reset MAL channel */ + /* Note: writing a 0 to a channel has no effect */ +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2)); +#else + mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum); +#endif + mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum); + + /* wait for reset */ + while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) { + if (i++ >= 1000) + break; + udelay (1000); + } + /* emac reset */ + out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST); + +#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + /* remove clocks for EMAC internal loopback */ + mfsdr (sdr_mfr, mfr); + mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum); + mtsdr (sdr_mfr, mfr); +#endif +} + +static void ether_post_send (int devnum, int hw_addr, void *packet, int length) +{ + int i = 0; + + while (tx.ctrl & MAL_TX_CTRL_READY) { + if (i++ > 100) { + printf ("TX timeout\n"); + return; + } + udelay (1000); + } + tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST | + EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP; + tx.data_len = length; + memcpy (tx.data_ptr, packet, length); + sync (); + + out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0); + sync (); +} + +static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length) +{ + int length; + int i = 0; + + while (rx.ctrl & MAL_RX_CTRL_EMPTY) { + if (i++ > 100) { + printf ("RX timeout\n"); + return 0; + } + udelay (1000); + } + length = rx.data_len - 4; + if (length <= max_length) + memcpy(packet, rx.data_ptr, length); + sync (); + + rx.ctrl |= MAL_RX_CTRL_EMPTY; + sync (); + + return length; +} + + /* + * Test routines + */ + +static void packet_fill (char *packet, int length) +{ + char c = (char) length; + int i; + + /* set up ethernet header */ + memset (packet, 0xff, 14); + + for (i = 14; i < length; i++) { + packet[i] = c++; + } +} + +static int packet_check (char *packet, int length) +{ + char c = (char) length; + int i; + + for (i = 14; i < length; i++) { + if (packet[i] != c++) + return -1; + } + + return 0; +} + +static int test_ctlr (int devnum, int hw_addr) +{ + int res = -1; + char packet_send[MAX_PACKET_LENGTH]; + char packet_recv[MAX_PACKET_LENGTH]; + int length; + int i; + int l; + + ether_post_init (devnum, hw_addr); + + for (i = 0; i < TEST_NUM; i++) { + for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) { + packet_fill (packet_send, l); + + ether_post_send (devnum, hw_addr, packet_send, l); + + length = ether_post_recv (devnum, hw_addr, packet_recv, + sizeof (packet_recv)); + + if (length != l || packet_check (packet_recv, length) < 0) { + goto Done; + } + } + } + + res = 0; + +Done: + + ether_post_halt (devnum, hw_addr); + + if (res != 0) { + post_log ("EMAC%d test failed\n", devnum); + } + + return res; +} + +int ether_post_test (int flags) +{ + int res = 0; + + /* Allocate tx & rx packet buffers */ + tx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE); + rx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE); + + if (!tx_buf || !rx_buf) { + printf ("Failed to allocate packet buffers\n"); + res = -1; + goto out_free; + } + + /* EMAC0 */ + if (test_ctlr (0, 0)) + res = -1; + + /* EMAC1 */ + if (test_ctlr (1, 0x100)) + res = -1; + +out_free: + free (tx_buf); + free (rx_buf); + + return res; +} + +#endif /* CONFIG_POST & CFG_POST_ETHER */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c new file mode 100644 index 00000000000..27e9ed01afc --- /dev/null +++ b/post/cpu/ppc4xx/fpu.c @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Sergei Poselenov <sposelenov@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +#ifdef CONFIG_POST +#if defined(CONFIG_440EP) || \ + defined(CONFIG_440EPX) + +#include <ppc4xx.h> +#include <asm/processor.h> + + +int fpu_status(void) +{ + if (mfspr(ccr0) & CCR0_DAPUIB) + return 0; /* Disabled */ + else + return 1; /* Enabled */ +} + + +void fpu_disable(void) +{ + mtspr(ccr0, mfspr(ccr0) | CCR0_DAPUIB); + mtmsr(mfmsr() & ~MSR_FP); +} + + +void fpu_enable(void) +{ + mtspr(ccr0, mfspr(ccr0) & ~CCR0_DAPUIB); + mtmsr(mfmsr() | MSR_FP); +} + +#endif +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c new file mode 100644 index 00000000000..3e746343d15 --- /dev/null +++ b/post/cpu/ppc4xx/spr.c @@ -0,0 +1,182 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin <igor@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* + * SPR test + * + * The test checks the contents of Special Purpose Registers (SPR) listed + * in the spr_test_list array below. + * Each SPR value is read using mfspr instruction, some bits are masked + * according to the table and the resulting value is compared to the + * corresponding table value. + */ + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_SPR + +#include <asm/processor.h> + +static struct { + int number; + char * name; + unsigned long mask; + unsigned long value; +} spr_test_list [] = { + /* Standard Special-Purpose Registers */ + + {0x001, "XER", 0x00000000, 0x00000000}, + {0x008, "LR", 0x00000000, 0x00000000}, + {0x009, "CTR", 0x00000000, 0x00000000}, + {0x016, "DEC", 0x00000000, 0x00000000}, + {0x01a, "SRR0", 0x00000000, 0x00000000}, + {0x01b, "SRR1", 0x00000000, 0x00000000}, + {0x110, "SPRG0", 0x00000000, 0x00000000}, + {0x111, "SPRG1", 0x00000000, 0x00000000}, + {0x112, "SPRG2", 0x00000000, 0x00000000}, + {0x113, "SPRG3", 0x00000000, 0x00000000}, + {0x11f, "PVR", 0x00000000, 0x00000000}, + + /* Additional Special-Purpose Registers. + * The values must match the initialization + * values from cpu/ppc4xx/start.S + */ + {0x30, "PID", 0x00000000, 0x00000000}, + {0x3a, "CSRR0", 0x00000000, 0x00000000}, + {0x3b, "CSRR1", 0x00000000, 0x00000000}, + {0x3d, "DEAR", 0x00000000, 0x00000000}, + {0x3e, "ESR", 0x00000000, 0x00000000}, + {0x3f, "IVPR", 0xffff0000, 0x00000000}, + {0x100, "USPRG0", 0x00000000, 0x00000000}, + {0x104, "SPRG4", 0x00000000, 0x00000000}, + {0x105, "SPRG5", 0x00000000, 0x00000000}, + {0x106, "SPRG6", 0x00000000, 0x00000000}, + {0x107, "SPRG7", 0x00000000, 0x00000000}, + {0x10c, "TBL", 0x00000000, 0x00000000}, + {0x10d, "TBU", 0x00000000, 0x00000000}, + {0x11e, "PIR", 0x0000000f, 0x00000000}, + {0x130, "DBSR", 0x00000000, 0x00000000}, + {0x134, "DBCR0", 0x00000000, 0x00000000}, + {0x135, "DBCR1", 0x00000000, 0x00000000}, + {0x136, "DBCR2", 0x00000000, 0x00000000}, + {0x138, "IAC1", 0x00000000, 0x00000000}, + {0x139, "IAC2", 0x00000000, 0x00000000}, + {0x13a, "IAC3", 0x00000000, 0x00000000}, + {0x13b, "IAC4", 0x00000000, 0x00000000}, + {0x13c, "DAC1", 0x00000000, 0x00000000}, + {0x13d, "DAC2", 0x00000000, 0x00000000}, + {0x13e, "DVC1", 0x00000000, 0x00000000}, + {0x13f, "DVC2", 0x00000000, 0x00000000}, + {0x150, "TSR", 0x00000000, 0x00000000}, + {0x154, "TCR", 0x00000000, 0x00000000}, + {0x190, "IVOR0", 0x0000fff0, 0x00000100}, + {0x191, "IVOR1", 0x0000fff0, 0x00000200}, + {0x192, "IVOR2", 0x0000fff0, 0x00000300}, + {0x193, "IVOR3", 0x0000fff0, 0x00000400}, + {0x194, "IVOR4", 0x0000fff0, 0x00000500}, + {0x195, "IVOR5", 0x0000fff0, 0x00000600}, + {0x196, "IVOR6", 0x0000fff0, 0x00000700}, + {0x197, "IVOR7", 0x0000fff0, 0x00000800}, + {0x198, "IVOR8", 0x0000fff0, 0x00000c00}, + {0x199, "IVOR9", 0x00000000, 0x00000000}, + {0x19a, "IVOR10", 0x0000fff0, 0x00000900}, + {0x19b, "IVOR11", 0x00000000, 0x00000000}, + {0x19c, "IVOR12", 0x00000000, 0x00000000}, + {0x19d, "IVOR13", 0x0000fff0, 0x00001300}, + {0x19e, "IVOR14", 0x0000fff0, 0x00001400}, + {0x19f, "IVOR15", 0x0000fff0, 0x00002000}, + {0x23a, "MCSRR0", 0x00000000, 0x00000000}, + {0x23b, "MCSRR1", 0x00000000, 0x00000000}, + {0x23c, "MCSR", 0x00000000, 0x00000000}, + {0x370, "INV0", 0x00000000, 0x00000000}, + {0x371, "INV1", 0x00000000, 0x00000000}, + {0x372, "INV2", 0x00000000, 0x00000000}, + {0x373, "INV3", 0x00000000, 0x00000000}, + {0x374, "ITV0", 0x00000000, 0x00000000}, + {0x375, "ITV1", 0x00000000, 0x00000000}, + {0x376, "ITV2", 0x00000000, 0x00000000}, + {0x377, "ITV3", 0x00000000, 0x00000000}, + {0x378, "CCR1", 0x00000000, 0x00000000}, + {0x390, "DNV0", 0x00000000, 0x00000000}, + {0x391, "DNV1", 0x00000000, 0x00000000}, + {0x392, "DNV2", 0x00000000, 0x00000000}, + {0x393, "DNV3", 0x00000000, 0x00000000}, + {0x394, "DTV0", 0x00000000, 0x00000000}, + {0x395, "DTV1", 0x00000000, 0x00000000}, + {0x396, "DTV2", 0x00000000, 0x00000000}, + {0x397, "DTV3", 0x00000000, 0x00000000}, + {0x398, "DVLIM", 0x0fc1f83f, 0x0001f800}, + {0x399, "IVLIM", 0x0fc1f83f, 0x0001f800}, + {0x39b, "RSTCFG", 0x00000000, 0x00000000}, + {0x39c, "DCDBTRL", 0x00000000, 0x00000000}, + {0x39d, "DCDBTRH", 0x00000000, 0x00000000}, + {0x39e, "ICDBTRL", 0x00000000, 0x00000000}, + {0x39f, "ICDBTRH", 0x00000000, 0x00000000}, + {0x3b2, "MMUCR", 0x00000000, 0x00000000}, + {0x3b3, "CCR0", 0x00000000, 0x00000000}, + {0x3d3, "ICDBDR", 0x00000000, 0x00000000}, + {0x3f3, "DBDR", 0x00000000, 0x00000000}, +}; + +static int spr_test_list_size = + sizeof (spr_test_list) / sizeof (spr_test_list[0]); + +int spr_post_test (int flags) +{ + int ret = 0; + int i; + + unsigned long code[] = { + 0x7c6002a6, /* mfspr r3,SPR */ + 0x4e800020 /* blr */ + }; + unsigned long (*get_spr) (void) = (void *) code; + + for (i = 0; i < spr_test_list_size; i++) { + int num = spr_test_list[i].number; + + /* mfspr r3,num */ + code[0] = 0x7c6002a6 | ((num & 0x1F) << 16) | ((num & 0x3E0) << 6); + + asm volatile ("isync"); + + if ((get_spr () & spr_test_list[i].mask) != + (spr_test_list[i].value & spr_test_list[i].mask)) { + post_log ("The value of %s special register " + "is incorrect: 0x%08X\n", + spr_test_list[i].name, get_spr ()); + ret = -1; + } + } + + return ret; +} + +#endif /* CONFIG_POST & CFG_POST_SPR */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c new file mode 100644 index 00000000000..b047d42dfd3 --- /dev/null +++ b/post/cpu/ppc4xx/uart.c @@ -0,0 +1,215 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin <igor@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* + * UART test + * + * The controllers are configured to loopback mode and several + * characters are transmitted. + */ + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_UART + +#include <asm/processor.h> +#include <serial.h> + +#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300 +#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400 +#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000500 +#define UART3_BASE CFG_PERIPHERAL_BASE + 0x00000600 + +#define CR0_MASK 0xdfffffff +#define CR0_EXTCLK_ENA 0x00800000 +#define CR0_UDIV_POS 0 +#define UDIV_SUBTRACT 0 +#define UART0_SDR sdr_uart0 +#define UART1_SDR sdr_uart1 +#define UART2_SDR sdr_uart2 +#define UART3_SDR sdr_uart3 +#define MFREG(a, d) mfsdr(a, d) +#define MTREG(a, d) mtsdr(a, d) + +#define UART_RBR 0x00 +#define UART_THR 0x00 +#define UART_IER 0x01 +#define UART_IIR 0x02 +#define UART_FCR 0x02 +#define UART_LCR 0x03 +#define UART_MCR 0x04 +#define UART_LSR 0x05 +#define UART_MSR 0x06 +#define UART_SCR 0x07 +#define UART_DLL 0x00 +#define UART_DLM 0x01 + +/* + Line Status Register. +*/ +#define asyncLSRDataReady1 0x01 +#define asyncLSROverrunError1 0x02 +#define asyncLSRParityError1 0x04 +#define asyncLSRFramingError1 0x08 +#define asyncLSRBreakInterrupt1 0x10 +#define asyncLSRTxHoldEmpty1 0x20 +#define asyncLSRTxShiftEmpty1 0x40 +#define asyncLSRRxFifoError1 0x80 + +DECLARE_GLOBAL_DATA_PTR; + +static int uart_post_init (unsigned long dev_base) +{ + unsigned long reg; + unsigned long udiv; + unsigned short bdiv; + volatile char val; +#ifdef CFG_EXT_SERIAL_CLOCK + unsigned long tmp; +#endif + int i; + + for (i = 0; i < 3500; i++) { + if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1) + break; + udelay (100); + } + MFREG(UART0_SDR, reg); + reg &= ~CR0_MASK; + +#ifdef CFG_EXT_SERIAL_CLOCK + reg |= CR0_EXTCLK_ENA; + udiv = 1; + tmp = gd->baudrate * 16; + bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp; +#else + /* For 440, the cpu clock is on divider chain A, UART on divider + * chain B ... so cpu clock is irrelevant. Get the "optimized" + * values that are subject to the 1/2 opb clock constraint + */ + serial_divs (gd->baudrate, &udiv, &bdiv); +#endif + + reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */ + + /* + * Configure input clock to baudrate generator for all + * available serial ports here + */ + MTREG(UART0_SDR, reg); +#if defined(UART1_SDR) + MTREG(UART1_SDR, reg); +#endif +#if defined(UART2_SDR) + MTREG(UART2_SDR, reg); +#endif +#if defined(UART3_SDR) + MTREG(UART3_SDR, reg); +#endif + + out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */ + out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */ + out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */ + out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */ + out8(dev_base + UART_FCR, 0x00); /* disable FIFO */ + out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */ + val = in8(dev_base + UART_LSR); /* clear line status */ + val = in8(dev_base + UART_RBR); /* read receive buffer */ + out8(dev_base + UART_SCR, 0x00); /* set scratchpad */ + out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */ + + return 0; +} + +static void uart_post_putc (unsigned long dev_base, char c) +{ + int i; + + out8 (dev_base + UART_THR, c); /* put character out */ + + /* Wait for transfer completion */ + for (i = 0; i < 3500; i++) { + if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1) + break; + udelay (100); + } +} + +static int uart_post_getc (unsigned long dev_base) +{ + int i; + + /* Wait for character available */ + for (i = 0; i < 3500; i++) { + if (in8 (dev_base + UART_LSR) & asyncLSRDataReady1) + break; + udelay (100); + } + return 0xff & in8 (dev_base + UART_RBR); +} + +static int test_ctlr (unsigned long dev_base, int index) +{ + int res = -1; + char test_str[] = "*** UART Test String ***\r\n"; + int i; + + uart_post_init (dev_base); + + for (i = 0; i < sizeof (test_str) - 1; i++) { + uart_post_putc (dev_base, test_str[i]); + if (uart_post_getc (dev_base) != test_str[i]) + goto done; + } + res = 0; +done: + if (res) + post_log ("uart%d test failed\n", index); + + return res; +} + +int uart_post_test (int flags) +{ + int i, res = 0; + static unsigned long base[] = { + UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE + }; + + for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) { + if (test_ctlr (base[i], i)) + res = -1; + } + serial_reinit_all (); + + return res; +} + +#endif /* CONFIG_POST & CFG_POST_UART */ +#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/watchdog.c b/post/cpu/ppc4xx/watchdog.c new file mode 100644 index 00000000000..bd4f4c9856b --- /dev/null +++ b/post/cpu/ppc4xx/watchdog.c @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Igor Lisitsin <igor@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* + * Watchdog test + * + * The test verifies the watchdog timer operation. + * On the first iteration, the test routine disables interrupts and + * makes a 10-second delay. If the system does not reboot during this delay, + * the watchdog timer is not operational and the test fails. If the system + * reboots, on the second iteration the test routine reports a success. + */ + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_WATCHDOG + +#include <watchdog.h> + +int watchdog_post_test (int flags) +{ + if (flags & POST_REBOOT) { + /* Test passed */ + return 0; + } + else { + /* 10-second delay */ + int ints = disable_interrupts (); + ulong base = post_time_ms (0); + + while (post_time_ms (base) < 10000) + ; + if (ints) + enable_interrupts (); + + /* + * If we have reached this point, the watchdog timer + * does not work + */ + return -1; + } +} + +#endif /* CONFIG_POST & CFG_POST_WATCHDOG */ +#endif /* CONFIG_POST */ diff --git a/post/drivers/Makefile b/post/drivers/Makefile index 068fa98b14c..cb2f1deacd7 100644 --- a/post/drivers/Makefile +++ b/post/drivers/Makefile @@ -26,6 +26,6 @@ SUBDIRS = LIB = libpostdrivers.a -COBJS = cache.o i2c.o memory.o rtc.o +COBJS = i2c.o memory.o rtc.o include $(TOPDIR)/post/rules.mk diff --git a/post/lib_ppc/Makefile b/post/lib_ppc/Makefile index 14354a03236..9f1b329d70b 100644 --- a/post/lib_ppc/Makefile +++ b/post/lib_ppc/Makefile @@ -21,6 +21,7 @@ # MA 02111-1307 USA # +SUBDIRS = fpu LIB = libpostppc.a diff --git a/post/lib_ppc/asm.S b/post/lib_ppc/asm.S index a0815a43a77..5e72b3418f5 100644 --- a/post/lib_ppc/asm.S +++ b/post/lib_ppc/asm.S @@ -34,6 +34,7 @@ /* void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2); */ .global cpu_post_exec_02 cpu_post_exec_02: + isync mflr r0 stwu r0, -4(r1) @@ -56,6 +57,7 @@ cpu_post_exec_02: /* void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3, ulong op4); */ .global cpu_post_exec_04 cpu_post_exec_04: + isync mflr r0 stwu r0, -4(r1) @@ -80,6 +82,7 @@ cpu_post_exec_04: /* void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2); */ .global cpu_post_exec_12 cpu_post_exec_12: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -100,6 +103,7 @@ cpu_post_exec_12: /* void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1); */ .global cpu_post_exec_11 cpu_post_exec_11: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -119,6 +123,7 @@ cpu_post_exec_11: /* void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1); */ .global cpu_post_exec_21 cpu_post_exec_21: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -148,6 +153,7 @@ cpu_post_exec_21: ulong op2); */ .global cpu_post_exec_22 cpu_post_exec_22: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -177,6 +183,7 @@ cpu_post_exec_22: /* void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3); */ .global cpu_post_exec_12w cpu_post_exec_12w: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -198,6 +205,7 @@ cpu_post_exec_12w: /* void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2); */ .global cpu_post_exec_11w cpu_post_exec_11w: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -218,6 +226,7 @@ cpu_post_exec_11w: /* void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3); */ .global cpu_post_exec_22w cpu_post_exec_22w: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -241,6 +250,7 @@ cpu_post_exec_22w: /* void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2); */ .global cpu_post_exec_21w cpu_post_exec_21w: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -263,6 +273,7 @@ cpu_post_exec_21w: /* void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3); */ .global cpu_post_exec_21x cpu_post_exec_21x: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) @@ -286,6 +297,7 @@ cpu_post_exec_21x: ulong cr); */ .global cpu_post_exec_31 cpu_post_exec_31: + isync mflr r0 stwu r0, -4(r1) stwu r4, -4(r1) diff --git a/post/lib_ppc/b.c b/post/lib_ppc/b.c index b4b17c8ff07..6e276c48d5c 100644 --- a/post/lib_ppc/b.c +++ b/post/lib_ppc/b.c @@ -49,7 +49,7 @@ extern void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump, ulong cr); static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi, - int pjump, int dec, int link, ulong pctr, ulong cr) + int pjump, int decr, int link, ulong pctr, ulong cr) { int ret = 0; ulong lr = 0; @@ -77,7 +77,7 @@ static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi, ret = pjump == jump ? 0 : -1; if (ret == 0) { - if (dec) + if (decr) ret = pctr == ctr + 1 ? 0 : -1; else ret = pctr == ctr ? 0 : -1; @@ -163,7 +163,7 @@ int cpu_post_test_b (void) { for (ctr = 1; ctr <= 2 && ret == 0; ctr++) { - int dec = cd < 2; + int decr = cd < 2; int cr = cond ? 0x80000000 : 0x00000000; int jumpc = cc >= 2 || (cc == 0 && !cond) || @@ -174,7 +174,7 @@ int cpu_post_test_b (void) int jump = jumpc && jumpd; ret = cpu_post_test_bc (link ? OP_BCL : OP_BC, - (cc << 3) + (cd << 1), 0, jump, dec, link, + (cc << 3) + (cd << 1), 0, jump, decr, link, ctr, cr); if (ret != 0) diff --git a/post/lib_ppc/fpu/20001122-1.c b/post/lib_ppc/fpu/20001122-1.c new file mode 100644 index 00000000000..f689b8232ff --- /dev/null +++ b/post/lib_ppc/fpu/20001122-1.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include <common.h> + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_FPU + +int fpu_post_test_math1 (void) +{ + volatile double a, *p; + double c, d; + volatile double b; + + d = 1.0; + p = &b; + + do + { + c = d; + d = c * 0.5; + b = 1 + d; + } while (b != 1.0); + + a = 1.0 + c; + + if (a == 1.0) { + post_log ("Error in FPU math1 test\n"); + return -1; + } + + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/20010114-2.c b/post/lib_ppc/fpu/20010114-2.c new file mode 100644 index 00000000000..6e60507f9ca --- /dev/null +++ b/post/lib_ppc/fpu/20010114-2.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include <common.h> + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_FPU + +static float rintf (float x) +{ + volatile float TWO23 = 8388608.0; + + if (__builtin_fabs (x) < TWO23) + { + if (x > 0.0) + { + x += TWO23; + x -= TWO23; + } + else if (x < 0.0) + { + x = TWO23 - x; + x = -(x - TWO23); + } + } + + return x; +} + +int fpu_post_test_math2 (void) +{ + if (rintf (-1.5) != -2.0) { + post_log ("Error in FPU math2 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/20010226-1.c b/post/lib_ppc/fpu/20010226-1.c new file mode 100644 index 00000000000..b2c47e3658a --- /dev/null +++ b/post/lib_ppc/fpu/20010226-1.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include <common.h> + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_FPU + +int fpu_post_test_math3 (void) +{ + volatile long double dfrom = 1.1; + volatile long double m1; + volatile long double m2; + volatile unsigned long mant_long; + + m1 = dfrom / 2.0; + m2 = m1 * 4294967296.0; + mant_long = ((unsigned long) m2) & 0xffffffff; + + if (mant_long != 0x8ccccccc) { + post_log ("Error in FPU math3 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/980619-1.c b/post/lib_ppc/fpu/980619-1.c new file mode 100644 index 00000000000..990aa0c9899 --- /dev/null +++ b/post/lib_ppc/fpu/980619-1.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include <common.h> + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_FPU + +int fpu_post_test_math4 (void) +{ + volatile float reale = 1.0f; + volatile float oneplus; + int i; + + if (sizeof (float) != 4) + return 0; + + for (i = 0; ; i++) + { + oneplus = 1.0f + reale; + if (oneplus == 1.0f) + break; + reale = reale / 2.0f; + } + /* Assumes ieee754 accurate arithmetic above. */ + if (i != 24) { + post_log ("Error in FPU math4 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/Makefile b/post/lib_ppc/fpu/Makefile new file mode 100644 index 00000000000..82646c80d65 --- /dev/null +++ b/post/lib_ppc/fpu/Makefile @@ -0,0 +1,32 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + + +LIB = libpostppcfpu.a + +COBJS += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o +COBJS += acc1.o compare-fp-1.o mul-subnormal-single-1.o + +include $(TOPDIR)/post/rules.mk + +CFLAGS += -mhard-float -fkeep-inline-functions diff --git a/post/lib_ppc/fpu/acc1.c b/post/lib_ppc/fpu/acc1.c new file mode 100644 index 00000000000..4cecbf6a4fe --- /dev/null +++ b/post/lib_ppc/fpu/acc1.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + */ + +#include <common.h> + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_FPU + +static double func (const double *array) +{ + double d = *array; + + if (d == 0.0) + return d; + else + return d + func (array + 1); +} + +int fpu_post_test_math5 (void) +{ + double values[] = { 0.1e-100, 1.0, -1.0, 0.0 }; + + if (func (values) != 0.1e-100) { + post_log ("Error in FPU math5 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/compare-fp-1.c b/post/lib_ppc/fpu/compare-fp-1.c new file mode 100644 index 00000000000..d866ad5a36b --- /dev/null +++ b/post/lib_ppc/fpu/compare-fp-1.c @@ -0,0 +1,225 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * Test for correctness of composite floating-point comparisons. + * Written by Paolo Bonzini, 26th May 2004. + * This file is originally a part of the GCC testsuite. + */ + +#include <common.h> + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_FPU + +static int failed; + +#define TEST(c) if ((c) != ok) failed++ +#define ORD(a, b) (!__builtin_isunordered ((a), (b))) +#define UNORD(a, b) (__builtin_isunordered ((a), (b))) +#define UNEQ(a, b) (__builtin_isunordered ((a), (b)) || ((a) == (b))) +#define UNLT(a, b) (__builtin_isunordered ((a), (b)) || ((a) < (b))) +#define UNLE(a, b) (__builtin_isunordered ((a), (b)) || ((a) <= (b))) +#define UNGT(a, b) (__builtin_isunordered ((a), (b)) || ((a) > (b))) +#define UNGE(a, b) (__builtin_isunordered ((a), (b)) || ((a) >= (b))) +#define LTGT(a, b) (__builtin_islessgreater ((a), (b))) + +static float pinf; +static float ninf; +static float NaN; + +static void iuneq (float x, float y, int ok) +{ + TEST (UNEQ (x, y)); + TEST (!LTGT (x, y)); + TEST (UNLE (x, y) && UNGE (x,y)); +} + +static void ieq (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNEQ (x, y)); +} + +static void iltgt (float x, float y, int ok) +{ + TEST (!UNEQ (x, y)); /* Not optimizable. */ + TEST (LTGT (x, y)); /* Same, __builtin_islessgreater does not trap. */ + TEST (ORD (x, y) && (UNLT (x, y) || UNGT (x,y))); +} + +static void ine (float x, float y, int ok) +{ + TEST (UNLT (x, y) || UNGT (x, y)); +} + +static void iunlt (float x, float y, int ok) +{ + TEST (UNLT (x, y)); + TEST (UNORD (x, y) || (x < y)); +} + +static void ilt (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNLT (x, y)); /* Not optimized */ + TEST ((x <= y) && (x != y)); + TEST ((x <= y) && (y != x)); + TEST ((x != y) && (x <= y)); /* Not optimized */ + TEST ((y != x) && (x <= y)); /* Not optimized */ +} + +static void iunle (float x, float y, int ok) +{ + TEST (UNLE (x, y)); + TEST (UNORD (x, y) || (x <= y)); +} + +static void ile (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNLE (x, y)); /* Not optimized */ + TEST ((x < y) || (x == y)); + TEST ((y > x) || (x == y)); + TEST ((x == y) || (x < y)); /* Not optimized */ + TEST ((y == x) || (x < y)); /* Not optimized */ +} + +static void iungt (float x, float y, int ok) +{ + TEST (UNGT (x, y)); + TEST (UNORD (x, y) || (x > y)); +} + +static void igt (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNGT (x, y)); /* Not optimized */ + TEST ((x >= y) && (x != y)); + TEST ((x >= y) && (y != x)); + TEST ((x != y) && (x >= y)); /* Not optimized */ + TEST ((y != x) && (x >= y)); /* Not optimized */ +} + +static void iunge (float x, float y, int ok) +{ + TEST (UNGE (x, y)); + TEST (UNORD (x, y) || (x >= y)); +} + +static void ige (float x, float y, int ok) +{ + TEST (ORD (x, y) && UNGE (x, y)); /* Not optimized */ + TEST ((x > y) || (x == y)); + TEST ((y < x) || (x == y)); + TEST ((x == y) || (x > y)); /* Not optimized */ + TEST ((y == x) || (x > y)); /* Not optimized */ +} + +int fpu_post_test_math6 (void) +{ + pinf = __builtin_inf (); + ninf = -__builtin_inf (); + NaN = __builtin_nan (""); + + iuneq (ninf, pinf, 0); + iuneq (NaN, NaN, 1); + iuneq (pinf, ninf, 0); + iuneq (1, 4, 0); + iuneq (3, 3, 1); + iuneq (5, 2, 0); + + ieq (1, 4, 0); + ieq (3, 3, 1); + ieq (5, 2, 0); + + iltgt (ninf, pinf, 1); + iltgt (NaN, NaN, 0); + iltgt (pinf, ninf, 1); + iltgt (1, 4, 1); + iltgt (3, 3, 0); + iltgt (5, 2, 1); + + ine (1, 4, 1); + ine (3, 3, 0); + ine (5, 2, 1); + + iunlt (NaN, ninf, 1); + iunlt (pinf, NaN, 1); + iunlt (pinf, ninf, 0); + iunlt (pinf, pinf, 0); + iunlt (ninf, ninf, 0); + iunlt (1, 4, 1); + iunlt (3, 3, 0); + iunlt (5, 2, 0); + + ilt (1, 4, 1); + ilt (3, 3, 0); + ilt (5, 2, 0); + + iunle (NaN, ninf, 1); + iunle (pinf, NaN, 1); + iunle (pinf, ninf, 0); + iunle (pinf, pinf, 1); + iunle (ninf, ninf, 1); + iunle (1, 4, 1); + iunle (3, 3, 1); + iunle (5, 2, 0); + + ile (1, 4, 1); + ile (3, 3, 1); + ile (5, 2, 0); + + iungt (NaN, ninf, 1); + iungt (pinf, NaN, 1); + iungt (pinf, ninf, 1); + iungt (pinf, pinf, 0); + iungt (ninf, ninf, 0); + iungt (1, 4, 0); + iungt (3, 3, 0); + iungt (5, 2, 1); + + igt (1, 4, 0); + igt (3, 3, 0); + igt (5, 2, 1); + + iunge (NaN, ninf, 1); + iunge (pinf, NaN, 1); + iunge (ninf, pinf, 0); + iunge (pinf, pinf, 1); + iunge (ninf, ninf, 1); + iunge (1, 4, 0); + iunge (3, 3, 1); + iunge (5, 2, 1); + + ige (1, 4, 0); + ige (3, 3, 1); + ige (5, 2, 1); + + if (failed) { + post_log ("Error in FPU math6 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/fpu.c b/post/lib_ppc/fpu/fpu.c new file mode 100644 index 00000000000..07dcba8cc92 --- /dev/null +++ b/post/lib_ppc/fpu/fpu.c @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Author: Sergei Poselenov <sposelenov@emcraft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* + * FPU test + * + * This test checks the arithmetic logic unit (ALU) of CPU. + * It tests independently various groups of instructions using + * run-time modification of the code to reduce the memory footprint. + * For more details refer to post/cpu/ *.c files. + */ + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_FPU + +#include <watchdog.h> + +extern int fpu_status (void); +extern void fpu_enable (void); +extern void fpu_disable (void); + +extern int fpu_post_test_math1 (void); +extern int fpu_post_test_math2 (void); +extern int fpu_post_test_math3 (void); +extern int fpu_post_test_math4 (void); +extern int fpu_post_test_math5 (void); +extern int fpu_post_test_math6 (void); +extern int fpu_post_test_math7 (void); + +int fpu_post_test (int flags) +{ + int fpu = fpu_status (); + + int ret = 0; + + WATCHDOG_RESET (); + + if (!fpu) + fpu_enable (); + + if (ret == 0) + ret = fpu_post_test_math1 (); + if (ret == 0) + ret = fpu_post_test_math2 (); + if (ret == 0) + ret = fpu_post_test_math3 (); + if (ret == 0) + ret = fpu_post_test_math4 (); + if (ret == 0) + ret = fpu_post_test_math5 (); + if (ret == 0) + ret = fpu_post_test_math6 (); + if (ret == 0) + ret = fpu_post_test_math7 (); + + if (!fpu) + fpu_disable (); + + WATCHDOG_RESET (); + + return ret; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/mul-subnormal-single-1.c b/post/lib_ppc/fpu/mul-subnormal-single-1.c new file mode 100644 index 00000000000..67f48da3352 --- /dev/null +++ b/post/lib_ppc/fpu/mul-subnormal-single-1.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * This file is originally a part of the GCC testsuite. + * Check that certain subnormal numbers (formerly known as denormalized + * numbers) are rounded to within 0.5 ulp. PR other/14354. + */ + +#include <common.h> + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_FPU + +union uf +{ + unsigned int u; + float f; +}; + +static float +u2f (unsigned int v) +{ + union uf u; + u.u = v; + return u.f; +} + +static unsigned int +f2u (float v) +{ + union uf u; + u.f = v; + return u.u; +} + +static int ok = 1; + +static void +tstmul (unsigned int ux, unsigned int uy, unsigned int ur) +{ + float x = u2f (ux); + float y = u2f (uy); + + if (f2u (x * y) != ur) + /* Set a variable rather than aborting here, to simplify tracing when + several computations are wrong. */ + ok = 0; +} + +/* We don't want to make this const and static, or else we risk inlining + causing the test to fold as constants at compile-time. */ +struct +{ + unsigned int p1, p2, res; +} static volatile expected[] = +{ + {0xfff, 0x3f800400, 0xfff}, + {0xf, 0x3fc88888, 0x17}, + {0xf, 0x3f844444, 0xf} +}; + +int fpu_post_test_math7 (void) +{ + unsigned int i; + + for (i = 0; i < sizeof (expected) / sizeof (expected[0]); i++) + { + tstmul (expected[i].p1, expected[i].p2, expected[i].res); + tstmul (expected[i].p2, expected[i].p1, expected[i].res); + } + + if (!ok) { + post_log ("Error in FPU math7 test\n"); + return -1; + } + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_FPU */ +#endif /* CONFIG_POST */ diff --git a/post/post.c b/post/post.c index ac419908605..28435cc4af8 100644 --- a/post/post.c +++ b/post/post.c @@ -428,7 +428,7 @@ void post_reloc (void) unsigned long post_time_ms (unsigned long base) { #ifdef CONFIG_PPC - return (unsigned long)get_ticks () / (get_tbclk () / CFG_HZ) - base; + return (unsigned long)(get_ticks () / (get_tbclk () / CFG_HZ)) - base; #else #warning "Not implemented yet" return 0; /* Not implemented yet */ diff --git a/post/tests.c b/post/tests.c index 3bccd1a8edd..f3604b24934 100644 --- a/post/tests.c +++ b/post/tests.c @@ -37,6 +37,7 @@ extern int i2c_post_test (int flags); extern int rtc_post_test (int flags); extern int memory_post_test (int flags); extern int cpu_post_test (int flags); +extern int fpu_post_test (int flags); extern int uart_post_test (int flags); extern int ether_post_test (int flags); extern int spi_post_test (int flags); @@ -126,6 +127,19 @@ struct post_test post_list[] = CFG_POST_CPU }, #endif +#if CONFIG_POST & CFG_POST_FPU + { + "FPU test", + "fpu", + "This test verifies the arithmetic logic unit of" + " FPU.", + POST_RAM | POST_ALWAYS, + &fpu_post_test, + NULL, + NULL, + CFG_POST_FPU + }, +#endif #if CONFIG_POST & CFG_POST_UART { "UART test", diff --git a/tools/Makefile b/tools/Makefile index 6177f902716..e8e02801a6b 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -21,10 +21,10 @@ # MA 02111-1307 USA # -BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) +BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) ubsha1$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) -OBJ_LINKS = environment.o crc32.o -OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o +OBJ_LINKS = environment.o crc32.o sha1.o +OBJ_FILES = img2srec.o mkimage.o envcrc.o ubsha1.o gen_eth_addr.o bmp_logo.o ifeq ($(ARCH),mips) BIN_FILES += inca-swap-bytes$(SFX) @@ -74,7 +74,7 @@ TOOLSUBDIRS = ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc) HOST_CFLAGS = -traditional-cpp -Wall HOST_LDFLAGS =-multiply_defined suppress -HOST_ENVIRO_CFLAGS = -traditional-cpp +HOST_ENVIRO_CFLAGS = else ifeq ($(HOSTOS)-$(HOSTARCH),netbsd-ppc) @@ -126,14 +126,17 @@ MAKEDEPEND = makedepend all: $(obj).depend $(BINS) $(LOGO_H) subdirs -$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o +$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o $(obj)sha1.o + $(CC) $(CFLAGS) -o $@ $^ + +$(obj)ubsha1$(SFX): $(obj)ubsha1.o $(obj)sha1.o $(CC) $(CFLAGS) -o $@ $^ $(obj)img2srec$(SFX): $(obj)img2srec.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ -$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o +$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o $(obj)sha1.o $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ $(STRIP) $@ @@ -160,9 +163,15 @@ $(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o $(obj)envcrc.o: $(src)envcrc.c $(CC) -g $(CFLAGS) -c -o $@ $< +$(obj)ubsha1.o: $(src)ubsha1.c + $(CC) -g $(CFLAGS) -c -o $@ $< + $(obj)crc32.o: $(obj)crc32.c $(CC) -g $(CFLAGS) -c -o $@ $< +$(obj)sha1.o: $(obj)sha1.c + $(CC) -g $(CFLAGS) -c -o $@ $< + $(obj)mkimage.o: $(src)mkimage.c $(CC) -g $(CFLAGS) -c -o $@ $< @@ -203,6 +212,10 @@ $(obj)crc32.c: @rm -f $(obj)crc32.c ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c +$(obj)sha1.c: + @rm -f $(obj)sha1.c + ln -s $(src)../lib_generic/sha1.c $(obj)sha1.c + $(LOGO_H): $(obj)bmp_logo $(LOGO_BMP) $(obj)./bmp_logo $(LOGO_BMP) >$@ diff --git a/tools/mkimage.c b/tools/mkimage.c index 416e658f7c7..21251306ac0 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -446,7 +446,7 @@ NXTARG: ; } /* We're a bit of paranoid */ -#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) +#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) && !defined(__APPLE__) (void) fdatasync (ifd); #else (void) fsync (ifd); @@ -496,7 +496,7 @@ NXTARG: ; (void) munmap((void *)ptr, sbuf.st_size); /* We're a bit of paranoid */ -#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) +#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) && !defined(__APPLE__) (void) fdatasync (ifd); #else (void) fsync (ifd); diff --git a/tools/ubsha1.c b/tools/ubsha1.c new file mode 100644 index 00000000000..b37b2b72242 --- /dev/null +++ b/tools/ubsha1.c @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2007 + * Heiko Schocher, DENX Software Engineering, <hs@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <fcntl.h> +#include <errno.h> +#include <string.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include "sha1.h" + +#ifndef __ASSEMBLY__ +#define __ASSEMBLY__ /* Dirty trick to get only #defines */ +#endif +#include <config.h> +#undef __ASSEMBLY__ + +#ifndef O_BINARY /* should be define'd on __WIN32__ */ +#define O_BINARY 0 +#endif + +#ifndef MAP_FAILED +#define MAP_FAILED (-1) +#endif + +extern int errno; + +extern void sha1_csum (unsigned char *input, int ilen, unsigned char output[20]); + +int main (int argc, char **argv) +{ + unsigned char output[20]; + int i, len; + + char *imagefile; + char *cmdname = *argv; + unsigned char *ptr; + unsigned char *data; + struct stat sbuf; + unsigned char *ptroff; + int ifd; + int off; + + if (argc > 1) { + imagefile = argv[1]; + ifd = open (imagefile, O_RDWR|O_BINARY); + if (ifd < 0) { + fprintf (stderr, "%s: Can't open %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + if (fstat (ifd, &sbuf) < 0) { + fprintf (stderr, "%s: Can't stat %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + len = sbuf.st_size; + ptr = (unsigned char *)mmap(0, len, + PROT_READ, MAP_SHARED, ifd, 0); + if (ptr == (unsigned char *)MAP_FAILED) { + fprintf (stderr, "%s: Can't read %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + + /* create a copy, so we can blank out the sha1 sum */ + data = malloc (len); + memcpy (data, ptr, len); + off = SHA1_SUM_POS; + ptroff = &data[len + off]; + for (i = 0; i < SHA1_SUM_LEN; i++) { + ptroff[i] = 0; + } + + sha1_csum ((unsigned char *) data, len, (unsigned char *)output); + + printf ("U-Boot sum:\n"); + for (i = 0; i < 20 ; i++) { + printf ("%02X ", output[i]); + } + printf ("\n"); + /* overwrite the sum in the bin file, with the actual */ + lseek (ifd, SHA1_SUM_POS, SEEK_END); + if (write (ifd, output, SHA1_SUM_LEN) != SHA1_SUM_LEN) { + fprintf (stderr, "%s: Can't write %s: %s\n", + cmdname, imagefile, strerror(errno)); + exit (EXIT_FAILURE); + } + + free (data); + (void) munmap((void *)ptr, len); + (void) close (ifd); + } + + return EXIT_SUCCESS; +} |