diff options
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 8 | ||||
| -rw-r--r-- | include/configs/ls1043a_common.h | 12 | ||||
| -rw-r--r-- | include/configs/ls1043aqds.h | 10 | ||||
| -rw-r--r-- | include/configs/ls1043ardb.h | 8 |
4 files changed, 19 insertions, 19 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 998944a31b2..c8ba2d63ea8 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -164,11 +164,11 @@ config SYS_LS_PPA_FW_ADDR hex "Address of PPA firmware loading from" depends on FSL_LS_PPA default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A - default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A - default 0x60500000 if SYS_LS_PPA_FW_IN_XIP - default 0x500000 if SYS_LS_PPA_FW_IN_MMC - default 0x500000 if SYS_LS_PPA_FW_IN_NAND + default 0x60400000 if SYS_LS_PPA_FW_IN_XIP + default 0x400000 if SYS_LS_PPA_FW_IN_MMC + default 0x400000 if SYS_LS_PPA_FW_IN_NAND help If the PPA firmware locate at XIP flash, such as NOR or diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e26924877d1..05419fe9fbd 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -208,20 +208,20 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 #ifdef CONFIG_NAND_BOOT -/* Store Fman ucode at offeset 0x160000(11 blocks). */ +/* Store Fman ucode at offeset 0x900000(72 blocks). */ #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is * about 1MB (2040 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 2080(0x820). + * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800). */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 1000000 @@ -229,7 +229,7 @@ #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR /* FMan fireware Pre-load address */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index b14e944897b..04d74acdeb0 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -12,7 +12,7 @@ #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 #elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #else #define CONFIG_SYS_TEXT_BASE 0x60100000 #endif @@ -413,20 +413,20 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_NAND_BOOT #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 5e5d1f647cc..2647b150b46 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -235,15 +235,15 @@ #if defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif @@ -284,7 +284,7 @@ !defined(CONFIG_QSPI_BOOT) #define CONFIG_U_QE #endif -#define CONFIG_SYS_QE_FW_ADDR 0x60600000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 #endif /* USB */ |