diff options
| -rw-r--r-- | boards.cfg | 3 | ||||
| -rw-r--r-- | doc/README.mx28evk | 18 | ||||
| -rw-r--r-- | include/configs/mx28evk.h | 31 |
3 files changed, 50 insertions, 2 deletions
diff --git a/boards.cfg b/boards.cfg index 199fcfa0c13..7725a1534d4 100644 --- a/boards.cfg +++ b/boards.cfg @@ -196,7 +196,8 @@ mx23_olinuxino arm arm926ejs mx23_olinuxino olimex apx4devkit arm arm926ejs apx4devkit bluegiga mxs apx4devkit mx23evk arm arm926ejs mx23evk freescale mxs mx23evk m28evk arm arm926ejs m28evk denx mxs m28evk -mx28evk arm arm926ejs mx28evk freescale mxs mx28evk +mx28evk arm arm926ejs mx28evk freescale mxs mx28evk:ENV_IS_IN_MMC +mx28evk_nand arm arm926ejs mx28evk freescale mxs mx28evk:ENV_IS_IN_NAND sc_sps_1 arm arm926ejs sc_sps_1 schulercontrol mxs nhk8815 arm arm926ejs nhk8815 st nomadik nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND diff --git a/doc/README.mx28evk b/doc/README.mx28evk index 2fc50696f5e..76db474bfb6 100644 --- a/doc/README.mx28evk +++ b/doc/README.mx28evk @@ -23,6 +23,24 @@ To boot MX28EVK from an SD card, set the boot mode DIP switches as: * VDD 5V: To the left (off) * Hold Button: Down (off) + +Environment Storage +------------------- + +There are two targets for mx28evk: + +"make mx28evk_config" - store enviroment variables into MMC + +or + +"make mx28evk_nand_config" - store enviroment variables into NAND flash + +Choose the target accordingly. + +Note: The mx28evk board does not come with a NAND flash populated from the +factory. It comes with an empty slot (U23), which allows the insertion of a +48-pin TSOP flash device. + Follow the instructions from doc/README.mx28_common to generate a bootable SD card. diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 428fe868ce2..d470b4733e5 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -62,6 +62,7 @@ #define CONFIG_CMD_SPI #define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_NAND /* Memory configurations */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ @@ -115,7 +116,6 @@ #define CONFIG_APBH_DMA /* MMC Driver */ -#define CONFIG_ENV_IS_IN_MMC #ifdef CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (256 * 1024) #define CONFIG_ENV_SIZE (16 * 1024) @@ -130,11 +130,40 @@ #endif /* NAND Driver */ +#define CONFIG_ENV_SIZE (16 * 1024) #ifdef CONFIG_CMD_NAND #define CONFIG_NAND_MXS #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x60000000 #define CONFIG_SYS_NAND_5_ADDR_CYCLE + +/* Environment is in NAND */ +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_RANGE (512 * 1024) +#ifndef CONFIG_ENV_OFFSET +#define CONFIG_ENV_OFFSET 0x300000 +#endif +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) + +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=gpmi-nand:" \ + "3m(bootloader)ro," \ + "512k(environment)," \ + "512k(redundant-environment)," \ + "4m(kernel)," \ + "128k(fdt)," \ + "8m(ramdisk)," \ + "-(filesystem)" #endif /* Ethernet on SOC (FEC) */ |