diff options
117 files changed, 2370 insertions, 1355 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index e5ad0cfb5ba..45977983d47 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -448,6 +448,7 @@ Timur Tabi <timur@freescale.com> MPC8349E-mITX MPC8349 MPC8349E-mITX-GP MPC8349 + P1022DS P1022 Erik Theisen <etheisen@mindspring.com> @@ -410,6 +410,7 @@ LIST_85xx=" \ MPC8569MDS_NAND \ MPC8572DS \ MPC8572DS_36BIT \ + P1022DS \ P2020DS \ P2020DS_36BIT \ P1011RDB \ @@ -221,6 +221,7 @@ LIBS += drivers/power/libpower.a LIBS += drivers/spi/libspi.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a +LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a endif ifeq ($(CPU),mpc85xx) LIBS += drivers/qe/qe.a diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index 42387b49e02..663510987d3 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -126,72 +126,6 @@ int checkcpu(void) return 0; } - -/* - * Program a UPM with the code supplied in the table. - * - * The 'dummy' variable is used to increment the MAD. 'dummy' is - * supposed to be a pointer to the memory of the device being - * programmed by the UPM. The data in the MDR is written into - * memory and the MAD is incremented every time there's a write - * to 'dummy'. Unfortunately, the current prototype for this - * function doesn't allow for passing the address of this - * device, and changing the prototype will break a number lots - * of other code, so we need to use a round-about way of finding - * the value for 'dummy'. - * - * The value can be extracted from the base address bits of the - * Base Register (BR) associated with the specific UPM. To find - * that BR, we need to scan all 8 BRs until we find the one that - * has its MSEL bits matching the UPM we want. Once we know the - * right BR, we can extract the base address bits from it. - * - * The MxMR and the BR and OR of the chosen bank should all be - * configured before calling this function. - * - * Parameters: - * upm: 0=UPMA, 1=UPMB, 2=UPMC - * table: Pointer to an array of values to program - * size: Number of elements in the array. Must be 64 or less. - */ -void upmconfig (uint upm, uint *table, uint size) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbus = &immap->lbus; - volatile uchar *dummy = NULL; - const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ - volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */ - uint i; - - /* Scan all the banks to determine the base address of the device */ - for (i = 0; i < 8; i++) { - if ((lbus->bank[i].br & BR_MSEL) == msel) { - dummy = (uchar *) (lbus->bank[i].br & BR_BA); - break; - } - } - - if (!dummy) { - printf("Error: %s() could not find matching BR\n", __FUNCTION__); - hang(); - } - - /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */ - *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000; - - for (i = 0; i < size; i++) { - lbus->mdr = table[i]; - __asm__ __volatile__ ("sync"); - *dummy = 0; /* Write the value to memory and increment MAD */ - __asm__ __volatile__ ("sync"); - while(((*mxmr & 0x3f) != ((i + 1) & 0x3f))); - } - - /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */ - *mxmr &= 0xCFFFFFC0; -} - - int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index f3b67ae2b91..83cba936057 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -236,8 +236,8 @@ void cpu_init_f (volatile immap_t * im) /* LCRR - Clock Ratio Register (10.3.1.16) * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description */ - clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); - __raw_readl(&im->lbus.lcrr); + clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val); + __raw_readl(&im->im_lbc.lcrr); isync(); /* Enable Time Base & Decrementer ( so we will have udelay() )*/ @@ -267,80 +267,41 @@ void cpu_init_f (volatile immap_t * im) /* Config QE ioports */ config_qe_ioports(); #endif + /* Set up preliminary BR/OR regs */ + init_early_memctl_regs(); - /* - * Memory Controller: - */ - - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_BR0_PRELIM) \ - && defined(CONFIG_SYS_OR0_PRELIM) \ - && defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \ - && defined(CONFIG_SYS_LBLAWAR0_PRELIM) - im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM; - im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM; + /* Local Access window setup */ +#if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM) im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM; im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM; #else -#error CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined +#error CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined #endif -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM; - im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM) im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM; im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM; #endif -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM; - im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM) im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM; im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM; #endif -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM; - im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM) im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM; im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM; #endif -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM; - im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM) im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM; im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM; #endif -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM; - im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM) im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM; im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM; #endif -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM; - im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM) im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM; im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM; #endif -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM; - im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM) im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM; im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM; diff --git a/arch/powerpc/cpu/mpc83xx/nand_init.c b/arch/powerpc/cpu/mpc83xx/nand_init.c index 38e141a8284..d1648b78107 100644 --- a/arch/powerpc/cpu/mpc83xx/nand_init.c +++ b/arch/powerpc/cpu/mpc83xx/nand_init.c @@ -88,8 +88,8 @@ void cpu_init_f (volatile immap_t * im) && defined(CONFIG_SYS_NAND_OR_PRELIM) \ && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \ && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM) - im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM; - im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM; + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM; im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM; #else diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index d04b1925999..93e9f1c3f9b 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -393,7 +393,7 @@ int get_clocks(void) lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); - lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; + lcrr = (im->im_lbc.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; switch (lcrr) { case 2: case 4: diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index f064fee26b6..4ee0e9af8ca 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -32,6 +32,7 @@ START = start.o resetvec.o SOBJS-$(CONFIG_MP) += release.o SOBJS = $(SOBJS-y) +COBJS-$(CONFIG_CMD_ERRATA) += cmd_errata.o COBJS-$(CONFIG_CPM2) += commproc.o # supports ddr1 @@ -63,6 +64,7 @@ COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_MP) += mp.o COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o +COBJS-$(CONFIG_P1022) += p1022_serdes.o COBJS-$(CONFIG_PCI) += pci.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c new file mode 100644 index 00000000000..d7835c8d690 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -0,0 +1,51 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <linux/compiler.h> +#include <asm/processor.h> + +static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + __maybe_unused u32 svr = get_svr(); + +#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001) + if (IS_SVR_REV(svr, 1, 0)) { + switch (SVR_SOC_VER(svr)) { + case SVR_P1013: + case SVR_P1013_E: + case SVR_P1022: + case SVR_P1022_E: + puts("Work-around for Erratum SATA A001 enabled\n"); + } + } +#endif + + return 0; +} + +U_BOOT_CMD( + errata, 1, 0, do_errata, + "Report errata workarounds", + "" +); diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 6f81fdf61b5..fe2b52d8607 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -32,6 +32,8 @@ #include <fsl_esdhc.h> #include <asm/cache.h> #include <asm/io.h> +#include <asm/mmu.h> +#include <asm/fsl_law.h> DECLARE_GLOBAL_DATA_PTR; @@ -93,18 +95,26 @@ int checkcpu (void) minor = PVR_MIN(pvr); printf("Core: "); - switch (fam) { - case PVR_FAM(PVR_85xx): - puts("E500"); - break; - default: - puts("Unknown"); - break; + if (PVR_FAM(PVR_85xx)) { + switch(PVR_MEM(pvr)) { + case 0x1: + case 0x2: + puts("E500"); + break; + case 0x3: + puts("E500MC"); + break; + case 0x4: + puts("E5500"); + break; + default: + puts("Unknown"); + break; + } + } else { + puts("Unknown"); } - if (PVR_MEM(pvr) == 0x03) - puts("MC"); - printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); get_sys_info(&sysinfo); @@ -250,71 +260,6 @@ reset_85xx_watchdog(void) #endif /* CONFIG_WATCHDOG */ /* - * Configures a UPM. The function requires the respective MxMR to be set - * before calling this function. "size" is the number or entries, not a sizeof. - */ -void upmconfig (uint upm, uint * table, uint size) -{ - int i, mdr, mad, old_mad = 0; - volatile u32 *mxmr; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - volatile u32 *brp,*orp; - volatile u8* dummy = NULL; - int upmmask; - - switch (upm) { - case UPMA: - mxmr = &lbc->mamr; - upmmask = BR_MS_UPMA; - break; - case UPMB: - mxmr = &lbc->mbmr; - upmmask = BR_MS_UPMB; - break; - case UPMC: - mxmr = &lbc->mcmr; - upmmask = BR_MS_UPMC; - break; - default: - printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm); - hang(); - } - - /* Find the address for the dummy write transaction */ - for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8; - i++, brp += 2, orp += 2) { - - /* Look for a valid BR with selected UPM */ - if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) { - dummy = (volatile u8*)(in_be32(brp) & BR_BA); - break; - } - } - - if (i == 8) { - printf("Error: %s() could not find matching BR\n", __FUNCTION__); - hang(); - } - - for (i = 0; i < size; i++) { - /* 1 */ - out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i); - /* 2 */ - out_be32(&lbc->mdr, table[i]); - /* 3 */ - mdr = in_be32(&lbc->mdr); - /* 4 */ - *(volatile u8 *)dummy = 0; - /* 5 */ - do { - mad = in_be32(mxmr) & MxMR_MAD_MSK; - } while (mad <= old_mad && !(!mad && i == (size-1))); - old_mad = mad; - } - out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM); -} - -/* * Initializes on-chip MMC controllers. * to override, implement board_mmc_init() */ @@ -326,3 +271,14 @@ int cpu_mmc_init(bd_t *bis) return 0; #endif } + +/* + * Print out the state of various machine registers. + * Currently prints out LAWs, BR0/OR0, and TLBs + */ +void mpc85xx_reginfo(void) +{ + print_tlbcam(); + print_laws(); + print_lbc_regs(); +} diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 99431dc1a76..d491e2ad5a5 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -154,7 +154,6 @@ static void corenet_tb_init(void) void cpu_init_f (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); extern void m8560_cpm_reset (void); #ifdef CONFIG_MPC8548 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); @@ -177,60 +176,7 @@ void cpu_init_f (void) config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR); #endif - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ -#if defined(CONFIG_SYS_OR0_REMAP) - out_be32(&memctl->or0, CONFIG_SYS_OR0_REMAP); -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - out_be32(&memctl->or1, CONFIG_SYS_OR1_REMAP); -#endif - - /* now restrict to preliminary range */ - /* if cs1 is already set via debugger, leave cs0/cs1 alone */ - if (! memctl->br1 & 1) { -#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - out_be32(&memctl->br0, CONFIG_SYS_BR0_PRELIM); - out_be32(&memctl->or0, CONFIG_SYS_OR0_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - out_be32(&memctl->or1, CONFIG_SYS_OR1_PRELIM); - out_be32(&memctl->br1, CONFIG_SYS_BR1_PRELIM); -#endif - } - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - out_be32(&memctl->or2, CONFIG_SYS_OR2_PRELIM); - out_be32(&memctl->br2, CONFIG_SYS_BR2_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - out_be32(&memctl->or3, CONFIG_SYS_OR3_PRELIM); - out_be32(&memctl->br3, CONFIG_SYS_BR3_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - out_be32(&memctl->or4, CONFIG_SYS_OR4_PRELIM); - out_be32(&memctl->br4, CONFIG_SYS_BR4_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - out_be32(&memctl->or5, CONFIG_SYS_OR5_PRELIM); - out_be32(&memctl->br5, CONFIG_SYS_BR5_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - out_be32(&memctl->or6, CONFIG_SYS_OR6_PRELIM); - out_be32(&memctl->br6, CONFIG_SYS_BR6_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - out_be32(&memctl->or7, CONFIG_SYS_OR7_PRELIM); - out_be32(&memctl->br7, CONFIG_SYS_BR7_PRELIM); -#endif + init_early_memctl_regs(); #if defined(CONFIG_CPM2) m8560_cpm_reset(); @@ -263,7 +209,7 @@ void cpu_init_f (void) int cpu_init_r(void) { #ifdef CONFIG_SYS_LBC_LCRR - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; #endif puts ("L2: "); diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c index 184cca4c543..8fb27abc55b 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c @@ -25,7 +25,7 @@ void cpu_init_f(void) { - ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + fsl_lbc_t *lbc = LBC_BASE_ADDR; /* * LCRR - Clock Ratio Register - set up local bus timing @@ -34,8 +34,8 @@ void cpu_init_f(void) out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8); #if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM) - out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM); - out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM); + set_lbc_br(0, CONFIG_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_NAND_OR_PRELIM); #else #error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined #endif diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 1d11ab470f8..2628cc5f950 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -404,8 +404,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_MP ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize); -#endif ft_fixup_num_cores(blob); +#endif ft_fixup_cache(blob); diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index ddbc2211c3b..e05257cf04a 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -77,6 +77,13 @@ int cpu_disable(int nr) return 0; } + +int is_core_disabled(int nr) { + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 coredisrl = in_be32(&gur->coredisrl); + + return (coredisrl & (1 << nr)); +} #else int cpu_disable(int nr) { @@ -96,6 +103,22 @@ int cpu_disable(int nr) return 0; } + +int is_core_disabled(int nr) { + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr = in_be32(&gur->devdisr); + + switch (nr) { + case 0: + return (devdisr & MPC85xx_DEVDISR_CPU0); + case 1: + return (devdisr & MPC85xx_DEVDISR_CPU1); + default: + printf("Invalid cpu number for disable %d\n", nr); + } + + return 0; +} #endif static u8 boot_entry_map[4] = { diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c new file mode 100644 index 00000000000..6b0fbf200cd --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c @@ -0,0 +1,98 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Author: Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 +#define SRDS2_MAX_LANES 2 + +static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x00] = {NONE, NONE, NONE, NONE}, + [0x01] = {NONE, NONE, NONE, NONE}, + [0x02] = {NONE, NONE, NONE, NONE}, + [0x03] = {NONE, NONE, NONE, NONE}, + [0x04] = {NONE, NONE, NONE, NONE}, + [0x06] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2}, + [0x07] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2}, + [0x09] = {PCIE1, NONE, NONE, NONE}, + [0x0a] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2}, + [0x0b] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2}, + [0x0d] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, + [0x0e] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, + [0x0f] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, + [0x15] = {PCIE1, PCIE3, PCIE2, PCIE2}, + [0x16] = {PCIE1, PCIE3, PCIE2, PCIE2}, + [0x17] = {PCIE1, PCIE3, PCIE2, PCIE2}, + [0x18] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x19] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1a] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1b] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1c] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x1d] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1e] = {PCIE1, PCIE1, PCIE2, PCIE2}, + [0x1f] = {PCIE1, PCIE1, PCIE2, PCIE2}, +}; + +static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { + [0x00] = {PCIE3, PCIE3}, + [0x01] = {PCIE2, PCIE3}, + [0x02] = {SATA1, SATA2}, + [0x03] = {SGMII_TSEC1, SGMII_TSEC2}, + [0x04] = {NONE, NONE}, + [0x06] = {SATA1, SATA2}, + [0x07] = {NONE, NONE}, + [0x09] = {PCIE3, PCIE2}, + [0x0a] = {SATA1, SATA2}, + [0x0b] = {NONE, NONE}, + [0x0d] = {PCIE3, PCIE2}, + [0x0e] = {SATA1, SATA2}, + [0x0f] = {NONE, NONE}, + [0x15] = {SGMII_TSEC1, SGMII_TSEC2}, + [0x16] = {SATA1, SATA2}, + [0x17] = {NONE, NONE}, + [0x18] = {PCIE3, PCIE3}, + [0x19] = {SGMII_TSEC1, SGMII_TSEC2}, + [0x1a] = {SATA1, SATA2}, + [0x1b] = {NONE, NONE}, + [0x1c] = {PCIE3, PCIE3}, + [0x1d] = {SGMII_TSEC1, SGMII_TSEC2}, + [0x1e] = {SATA1, SATA2}, + [0x1f] = {NONE, NONE}, +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + unsigned int i; + + debug("%s: dev = %d\n", __FUNCTION__, device); + debug("PORDEVSR[IO_SEL] = 0x%x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds_cfg); + return 0; + } + + for (i = 0; i < SRDS1_MAX_LANES; i++) { + if (serdes1_cfg_tbl[srds_cfg][i] == device) + return 1; + if (serdes2_cfg_tbl[srds_cfg][i] == device) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 8132115fca6..dd4c6b3e984 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -172,10 +172,7 @@ void get_sys_info (sys_info_t * sysInfo) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else - { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; - } + lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { #if defined(CONFIG_FSL_CORENET) diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index b3037aceaf0..f2833a5df70 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -55,7 +55,45 @@ void init_tlbs(void) return ; } +void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, + phys_addr_t *rpn) +{ + u32 _mas1; + + mtspr(MAS0, FSL_BOOKE_MAS0(1, idx, 0)); + asm volatile("tlbre;isync"); + _mas1 = mfspr(MAS1); + + *valid = (_mas1 & MAS1_VALID); + *tsize = (_mas1 >> 8) & 0xf; + *epn = mfspr(MAS2) & MAS2_EPN; + *rpn = mfspr(MAS3) & MAS3_RPN; +#ifdef CONFIG_ENABLE_36BIT_PHYS + *rpn |= ((u64)mfspr(MAS7)) << 32; +#endif +} + #ifndef CONFIG_NAND_SPL +void print_tlbcam(void) +{ + int i; + unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff; + + /* walk all the entries */ + printf("TLBCAM entries\n"); + for (i = 0; i < num_cam; i++) { + unsigned long epn; + u32 tsize, valid; + phys_addr_t rpn; + + read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn); + printf("entry %02d: V: %d EPN 0x%08x RPN 0x%08llx size:", + i, (valid == 0) ? 0 : 1, (unsigned int)epn, + (unsigned long long)rpn); + print_size(TSIZE_TO_BYTES(tsize), "\n"); + } +} + static inline void use_tlb_cam(u8 idx) { int i = idx / 32; @@ -82,15 +120,9 @@ void init_used_tlb_cams(void) /* walk all the entries */ for (i = 0; i < num_cam; i++) { - u32 _mas1; - mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0)); - asm volatile("tlbre;isync"); - _mas1 = mfspr(MAS1); - - /* if the entry isn't valid skip it */ - if ((_mas1 & MAS1_VALID)) + if (mfspr(MAS1) & MAS1_VALID) use_tlb_cam(i); } } @@ -134,7 +166,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, #ifdef CONFIG_ADDR_MAP if ((tlb == 1) && (gd->flags & GD_FLG_RELOC)) - addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel); + addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), esel); #endif } @@ -201,26 +233,12 @@ void init_addr_map(void) /* walk all the entries */ for (i = 0; i < num_cam; i++) { unsigned long epn; - u32 tsize, _mas1; + u32 tsize, valid; phys_addr_t rpn; - mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0)); - - asm volatile("tlbre;isync"); - _mas1 = mfspr(MAS1); - - /* if the entry isn't valid skip it */ - if (!(_mas1 & MAS1_VALID)) - continue; - - tsize = (_mas1 >> 8) & 0xf; - epn = mfspr(MAS2) & MAS2_EPN; - rpn = mfspr(MAS3) & MAS3_RPN; -#ifdef CONFIG_ENABLE_36BIT_PHYS - rpn |= ((phys_addr_t)mfspr(MAS7)) << 32; -#endif - - addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), i); + read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn); + if (valid & MAS1_VALID) + addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), i); } return ; diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c index 9064e780374..4e90fd22037 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu.c +++ b/arch/powerpc/cpu/mpc86xx/cpu.c @@ -180,22 +180,9 @@ watchdog_reset(void) */ void mpc86xx_reginfo(void) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - ccsr_lbc_t *lbc = &immap->im_lbc; - print_bats(); print_laws(); - - printf ("Local Bus Controller Registers\n" - "\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0)); - printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1)); - printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2)); - printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3)); - printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4)); - printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5)); - printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6)); - printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7)); - + print_lbc_regs(); } /* diff --git a/arch/powerpc/cpu/mpc86xx/cpu_init.c b/arch/powerpc/cpu/mpc86xx/cpu_init.c index b4f047d85d0..82c216ba5d1 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc86xx/cpu_init.c @@ -46,9 +46,6 @@ DECLARE_GLOBAL_DATA_PTR; void cpu_init_f(void) { - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_lbc_t *memctl = &immap->im_lbc; - /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -61,58 +58,8 @@ void cpu_init_f(void) setup_bats(); - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_OR0_REMAP) - memctl->or0 = CONFIG_SYS_OR0_REMAP; -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - memctl->or1 = CONFIG_SYS_OR1_REMAP; -#endif - - /* now restrict to preliminary range */ -#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - memctl->br0 = CONFIG_SYS_BR0_PRELIM; - memctl->or0 = CONFIG_SYS_OR0_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - memctl->or1 = CONFIG_SYS_OR1_PRELIM; - memctl->br1 = CONFIG_SYS_BR1_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - memctl->or2 = CONFIG_SYS_OR2_PRELIM; - memctl->br2 = CONFIG_SYS_BR2_PRELIM; -#endif + init_early_memctl_regs(); -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - memctl->or3 = CONFIG_SYS_OR3_PRELIM; - memctl->br3 = CONFIG_SYS_BR3_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - memctl->or4 = CONFIG_SYS_OR4_PRELIM; - memctl->br4 = CONFIG_SYS_BR4_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - memctl->or5 = CONFIG_SYS_OR5_PRELIM; - memctl->br5 = CONFIG_SYS_BR5_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - memctl->or6 = CONFIG_SYS_OR6_PRELIM; - memctl->br6 = CONFIG_SYS_BR6_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - memctl->or7 = CONFIG_SYS_OR7_PRELIM; - memctl->br7 = CONFIG_SYS_BR7_PRELIM; -#endif #if defined(CONFIG_FSL_DMA) dma_init(); #endif diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c index 51f3f4c2203..ff89ee554c4 100644 --- a/arch/powerpc/cpu/mpc86xx/fdt.c +++ b/arch/powerpc/cpu/mpc86xx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -55,6 +55,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); if (off < 0) printf("%s: %s\n", __FUNCTION__, fdt_strerror(off)); -#endif + ft_fixup_num_cores(blob); +#endif } diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c index 24eb30aaaa6..30c99ebc56e 100644 --- a/arch/powerpc/cpu/mpc86xx/mp.c +++ b/arch/powerpc/cpu/mpc86xx/mp.c @@ -66,6 +66,23 @@ int cpu_disable(int nr) return 0; } +int is_core_disabled(int nr) { + immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; + ccsr_gur_t *gur = &immap->im_gur; + u32 devdisr = in_be32(&gur->devdisr); + + switch (nr) { + case 0: + return (devdisr & MPC86xx_DEVDISR_CPU0); + case 1: + return (devdisr & MPC86xx_DEVDISR_CPU1); + default: + printf("Invalid cpu number for disable %d\n", nr); + } + + return 0; +} + int cpu_release(int nr, int argc, char * const argv[]) { /* dummy function so common/cmd_mp.c will build diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c index 64a3479d7e5..a2d0a8ac6eb 100644 --- a/arch/powerpc/cpu/mpc86xx/speed.c +++ b/arch/powerpc/cpu/mpc86xx/speed.c @@ -97,10 +97,7 @@ void get_sys_info(sys_info_t *sysInfo) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else - { - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; - } + lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 481f9e541dc..ea5122289e2 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -1,5 +1,5 @@ # -# Copyright 2009 Freescale Semiconductor, Inc. +# Copyright 2009-2010 Freescale Semiconductor, Inc. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License @@ -10,9 +10,13 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib8xxx.a +ifneq ($(CPU),mpc83xx) COBJS-y += cpu.o -COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_PCI) += pci_cfg.o +endif + +COBJS-$(CONFIG_OF_LIBFDT) += fdt.o +COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index ccefaf57160..88c47d1aede 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2010 Freescale Semiconductor, Inc. * * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains @@ -26,6 +26,27 @@ #include <common.h> #include <libfdt.h> #include <fdt_support.h> +#include <asm/mp.h> + +#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) +static int ft_del_cpuhandle(void *blob, int cpuhandle) +{ + int off, ret = -FDT_ERR_NOTFOUND; + + /* if we find a match, we'll delete at it which point the offsets are + * invalid so we start over from the beginning + */ + off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle", + &cpuhandle, 4); + while (off != -FDT_ERR_NOTFOUND) { + fdt_delprop(blob, off, "cpu-handle"); + ret = 1; + off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle", + &cpuhandle, 4); + } + + return ret; +} void ft_fixup_num_cores(void *blob) { int off, num_cores, del_cores; @@ -37,13 +58,18 @@ void ft_fixup_num_cores(void *blob) { while (off != -FDT_ERR_NOTFOUND) { u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); - /* if we find a cpu node outside of what we expect delete it - * and reset the offset back to the start since we can't - * trust the offsets anymore - */ - if (*reg > num_cores-1) { - fdt_del_node(blob, off); - del_cores++; + if ((*reg > num_cores-1) || (is_core_disabled(*reg))) { + int ph = fdt_get_phandle(blob, off); + + /* Delete the cpu node once there are no cpu handles */ + if (-FDT_ERR_NOTFOUND == ft_del_cpuhandle(blob, ph)) { + fdt_del_node(blob, off); + del_cores++; + } + /* either we deleted some cpu handles or the cpu node + * so we reset the offset back to the start since we + * can't trust the offsets anymore + */ off = -1; } off = fdt_node_offset_by_prop_value(blob, off, @@ -53,3 +79,139 @@ void ft_fixup_num_cores(void *blob) { debug ("deleted %d extra core entry entries from device tree\n", del_cores); } +#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */ + +#ifdef CONFIG_HAS_FSL_DR_USB +void fdt_fixup_dr_usb(void *blob, bd_t *bd) +{ + char *mode; + char *type; + const char *compat = "fsl-usb2-dr"; + const char *prop_mode = "dr_mode"; + const char *prop_type = "phy_type"; + int node_offset; + int err; + + mode = getenv("usb_dr_mode"); + type = getenv("usb_phy_type"); + if (!mode && !type) + return; + + node_offset = fdt_node_offset_by_compatible(blob, 0, compat); + if (node_offset < 0) { + printf("WARNING: could not find compatible node %s: %s.\n", + compat, fdt_strerror(node_offset)); + return; + } + + if (mode) { + err = fdt_setprop(blob, node_offset, prop_mode, mode, + strlen(mode) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_mode, compat, fdt_strerror(err)); + } + + if (type) { + err = fdt_setprop(blob, node_offset, prop_type, type, + strlen(type) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_type, compat, fdt_strerror(err)); + } +} +#endif /* CONFIG_HAS_FSL_DR_USB */ + +/* + * update crypto node properties to a specified revision of the SEC + * called with sec_rev == 0 if not on an E processor + */ +#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + const struct sec_rev_prop { + u32 sec_rev; + u32 num_channels; + u32 channel_fifo_len; + u32 exec_units_mask; + u32 descriptor_types_mask; + } sec_rev_prop_list [] = { + { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ + { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ + { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ + { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ + { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ + { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ + { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ + }; + char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * + sizeof("fsl,secX.Y")]; + int crypto_node, sec_idx, err; + char *p; + u32 val; + + /* locate crypto node based on lowest common compatible */ + crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); + if (crypto_node == -FDT_ERR_NOTFOUND) + return; + + /* delete it if not on an E-processor */ + if (crypto_node > 0 && !sec_rev) { + fdt_del_node(blob, crypto_node); + return; + } + + /* else we got called for possible uprev */ + for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) + if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) + break; + + if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { + puts("warning: unknown SEC revision number\n"); + return; + } + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); + err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); + err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); + err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); + err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = 0; + while (sec_idx >= 0) { + p = compat_strlist + val; + val += sprintf(p, "fsl,sec%d.%d", + (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, + sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; + sec_idx--; + } + err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); +} +#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + if (!sec_rev) + fdt_del_node_and_alias(blob, "crypto"); +} +#endif diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c new file mode 100644 index 00000000000..fcef40c5b8b --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -0,0 +1,134 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_lbc.h> + +void print_lbc_regs(void) +{ + int i; + + printf("\nLocal Bus Controller Registers\n"); + for (i = 0; i < 8; i++) { + printf("BR%d\t0x%08X\tOR%d\t0x%08X\n", + i, get_lbc_br(i), i, get_lbc_or(i)); + } +} + +void init_early_memctl_regs(void) +{ + uint init_br1 = 1; + +#ifdef CONFIG_MPC85xx + /* if cs1 is already set via debugger, leave cs0/cs1 alone */ + if (get_lbc_br(1) & BR_V) + init_br1 = 0; +#endif + + /* + * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at + * preliminary addresses - these have to be modified later + * when FLASH size has been determined + */ +#if defined(CONFIG_SYS_OR0_REMAP) + set_lbc_or(0, CONFIG_SYS_OR0_REMAP); +#endif +#if defined(CONFIG_SYS_OR1_REMAP) + set_lbc_or(1, CONFIG_SYS_OR1_REMAP); +#endif + /* now restrict to preliminary range */ + if (init_br1) { + set_lbc_br(0, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR0_PRELIM); + +#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) + set_lbc_or(1, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR1_PRELIM); +#endif + } + +#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) + set_lbc_or(5, CONFIG_SYS_OR5_PRELIM); + set_lbc_br(5, CONFIG_SYS_BR5_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) + set_lbc_or(6, CONFIG_SYS_OR6_PRELIM); + set_lbc_br(6, CONFIG_SYS_BR6_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) + set_lbc_or(7, CONFIG_SYS_OR7_PRELIM); + set_lbc_br(7, CONFIG_SYS_BR7_PRELIM); +#endif +} + +/* + * Configures a UPM. The function requires the respective MxMR to be set + * before calling this function. "size" is the number or entries, not a sizeof. + */ +void upmconfig(uint upm, uint *table, uint size) +{ + fsl_lbc_t *lbc = LBC_BASE_ADDR; + int i, mdr, mad, old_mad = 0; + u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK); + u32 msel = BR_UPMx_TO_MSEL(upm); + u32 *mxmr = &lbc->mamr + upm; + volatile u8 *dummy = NULL; + + if (upm < UPMA || upm > UPMC) { + printf("Error: %s() Bad UPM index %d\n", __func__, upm); + hang(); + } + + /* + * Find the address for the dummy write - scan all of the BRs until we + * find one matching the UPM and extract the base address bits from it. + */ + for (i = 0; i < 8; i++) { + if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) { + dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA); + break; + } + } + + if (!dummy) { + printf("Error: %s() No matching BR\n", __func__); + hang(); + } + + /* Program UPM using steps outlined by the reference manual */ + for (i = 0; i < size; i++) { + out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i); + out_be32(&lbc->mdr, table[i]); + mdr = in_be32(&lbc->mdr); + *dummy = 0; + do { + mad = in_be32(mxmr) & MxMR_MAD_MSK; + } while (mad <= old_mad && !(!mad && i == (size-1))); + old_mad = mad; + } + + /* Return to normal operation */ + out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM); +} diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index fc3facb3076..d88c282f75a 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -66,6 +66,15 @@ #define CONFIG_TSECV2 #endif +/* + * SEC (crypto unit) major compatible version determination + */ +#if defined(CONFIG_FSL_CORENET) +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx) +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#endif + /* Number of TLB CAM entries we have on FSL Book-E chips */ #if defined(CONFIG_E500MC) #define CONFIG_SYS_NUM_TLBCAMS 64 @@ -76,4 +85,10 @@ /* Relocation to SDRAM works on all PPC boards */ #define CONFIG_RELOC_FIXUP_WORKS +/* Since so many PPC SOCs have a semi-common LBC, define this here */ +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ + defined(CONFIG_MPC83xx) +#define CONFIG_FSL_LBC +#endif + #endif /* _ASM_CONFIG_H_ */ diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index 34c56a259a6..12ba1a6a041 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -47,6 +47,7 @@ enum law_size { }; #define law_size_bits(sz) (__ilog2_u64(sz) - 1) +#define lawar_size(x) (1ULL << ((x & 0x3f) + 1)) #ifdef CONFIG_FSL_CORENET enum law_trgt_if { diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 03ae6a765b4..82d24ab13f8 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -14,6 +14,7 @@ #define __ASM_PPC_FSL_LBC_H #include <config.h> +#include <common.h> /* BR - Base Registers */ @@ -61,6 +62,8 @@ #define BR_V 0x00000001 #define BR_V_SHIFT 0 +#define BR_UPMx_TO_MSEL(x) ((x + 4) << BR_MSEL_SHIFT) + #define UPMA 0 #define UPMB 1 #define UPMC 2 @@ -453,49 +456,70 @@ #define LTESR_CC 0x00000001 #ifndef __ASSEMBLY__ -/* - * Local Bus Controller Registers. - */ -typedef struct lbus_bank { - u32 br; /* Base Register */ - u32 or; /* Option Register */ -} lbus_bank_t; - -typedef struct fsl_lbus { - lbus_bank_t bank[8]; - u8 res0[0x28]; - u32 mar; /* UPM Address Register */ - u8 res1[0x4]; - u32 mamr; /* UPMA Mode Register */ - u32 mbmr; /* UPMB Mode Register */ - u32 mcmr; /* UPMC Mode Register */ - u8 res2[0x8]; - u32 mrtpr; /* Memory Refresh Timer Prescaler Register */ - u32 mdr; /* UPM Data Register */ - u8 res3[0x4]; - u32 lsor; /* Special Operation Initiation Register */ - u32 lsdmr; /* SDRAM Mode Register */ - u8 res4[0x8]; - u32 lurt; /* UPM Refresh Timer */ - u32 lsrt; /* SDRAM Refresh Timer */ - u8 res5[0x8]; - u32 ltesr; /* Transfer Error Status Register */ - u32 ltedr; /* Transfer Error Disable Register */ - u32 lteir; /* Transfer Error Interrupt Register */ - u32 lteatr; /* Transfer Error Attributes Register */ - u32 ltear; /* Transfer Error Address Register */ - u8 res6[0xC]; - u32 lbcr; /* Configuration Register */ - u32 lcrr; /* Clock Ratio Register */ - u8 res7[0x8]; - u32 fmr; /* Flash Mode Register */ - u32 fir; /* Flash Instruction Register */ - u32 fcr; /* Flash Command Register */ - u32 fbar; /* Flash Block Addr Register */ - u32 fpar; /* Flash Page Addr Register */ - u32 fbcr; /* Flash Byte Count Register */ - u8 res8[0xF08]; -} fsl_lbus_t; -#endif /* __ASSEMBLY__ */ +#include <asm/io.h> + +extern void print_lbc_regs(void); +extern void init_early_memctl_regs(void); +extern void upmconfig(uint upm, uint *table, uint size); + +#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR) +#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br)) +#define get_lbc_or(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].or)) +#define set_lbc_br(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].br, v)) +#define set_lbc_or(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].or, v)) + +typedef struct lbc_bank { + u32 br; + u32 or; +} lbc_bank_t; +/* Local Bus Controller Registers */ +typedef struct fsl_lbc { + lbc_bank_t bank[8]; + u8 res1[40]; + u32 mar; /* LBC UPM Addr */ + u8 res2[4]; + u32 mamr; /* LBC UPMA Mode */ + u32 mbmr; /* LBC UPMB Mode */ + u32 mcmr; /* LBC UPMC Mode */ + u8 res3[8]; + u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */ + u32 mdr; /* LBC UPM Data */ +#ifdef CONFIG_FSL_ELBC + u8 res4[4]; + u32 lsor; + u8 res5[12]; + u32 lurt; /* LBC UPM Refresh Timer */ + u8 res6[4]; +#else + u8 res4[8]; + u32 lsdmr; /* LBC SDRAM Mode */ + u8 res5[8]; + u32 lurt; /* LBC UPM Refresh Timer */ + u32 lsrt; /* LBC SDRAM Refresh Timer */ +#endif + u8 res7[8]; + u32 ltesr; /* LBC Transfer Error Status */ + u32 ltedr; /* LBC Transfer Error Disable */ + u32 lteir; /* LBC Transfer Error IRQ */ + u32 lteatr; /* LBC Transfer Error Attrs */ + u32 ltear; /* LBC Transfer Error Addr */ + u8 res8[12]; + u32 lbcr; /* LBC Configuration */ + u32 lcrr; /* LBC Clock Ratio */ +#ifdef CONFIG_NAND_FSL_ELBC + u8 res9[0x8]; + u32 fmr; /* Flash Mode Register */ + u32 fir; /* Flash Instruction Register */ + u32 fcr; /* Flash Command Register */ + u32 fbar; /* Flash Block Addr Register */ + u32 fpar; /* Flash Page Addr Register */ + u32 fbcr; /* Flash Byte Count Register */ + u8 res10[0xF08]; +#else + u8 res9[0xF28]; +#endif +} fsl_lbc_t; + +#endif /* __ASSEMBLY__ */ #endif /* __ASM_PPC_FSL_LBC_H */ diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index db61e7e9cbf..bb875435d33 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -162,14 +162,15 @@ typedef struct ccsr_pci { } ccsr_fsl_pci_t; struct fsl_pci_info { - unsigned long regs; - pci_addr_t mem_bus; - phys_size_t mem_phys; - pci_size_t mem_size; - pci_addr_t io_bus; - phys_size_t io_phys; - pci_size_t io_size; - int pci_num; + unsigned long regs; + pci_addr_t mem_bus; + phys_size_t mem_phys; + pci_size_t mem_size; + pci_addr_t io_bus; + phys_size_t io_phys; + pci_size_t io_size; + enum law_trgt_if law; + int pci_num; }; int fsl_pci_init_port(struct fsl_pci_info *pci_info, @@ -184,6 +185,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, x.io_bus = CONFIG_SYS_PCI##num##_IO_BUS; \ x.io_phys = CONFIG_SYS_PCI##num##_IO_PHYS; \ x.io_size = CONFIG_SYS_PCI##num##_IO_SIZE; \ + x.law = LAW_TRGT_IF_PCI_##num; \ x.pci_num = num; \ } @@ -196,6 +198,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, x.io_bus = CONFIG_SYS_PCIE##num##_IO_BUS; \ x.io_phys = CONFIG_SYS_PCIE##num##_IO_PHYS; \ x.io_size = CONFIG_SYS_PCIE##num##_IO_SIZE; \ + x.law = LAW_TRGT_IF_PCIE_##num; \ x.pci_num = num; \ } diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 3a9cdc4f8df..cc0293acd49 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -646,7 +646,7 @@ typedef struct immap { u8 res2[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res3[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res4[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -686,7 +686,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -721,7 +721,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -766,7 +766,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -816,7 +816,7 @@ typedef struct immap { u8 res4[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res5[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res6[0x2000]; dma83xx_t dma; /* DMA */ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ @@ -855,7 +855,7 @@ typedef struct immap { u8 res3[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res4[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res5[0x2000]; dma83xx_t dma; /* DMA */ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ @@ -879,6 +879,7 @@ typedef struct immap { #endif #define CONFIG_SYS_MPC83xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET) +#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 5b205d1c24c..4e665d39944 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -266,50 +266,6 @@ typedef struct ccsr_duart { } ccsr_duart_t; #endif -/* Local Bus Controller Registers */ -typedef struct ccsr_lbc { - u32 br0; /* LBC Base 0 */ - u32 or0; /* LBC Options 0 */ - u32 br1; /* LBC Base 1 */ - u32 or1; /* LBC Options 1 */ - u32 br2; /* LBC Base 2 */ - u32 or2; /* LBC Options 2 */ - u32 br3; /* LBC Base 3 */ - u32 or3; /* LBC Options 3 */ - u32 br4; /* LBC Base 4 */ - u32 or4; /* LBC Options 4 */ - u32 br5; /* LBC Base 5 */ - u32 or5; /* LBC Options 5 */ - u32 br6; /* LBC Base 6 */ - u32 or6; /* LBC Options 6 */ - u32 br7; /* LBC Base 7 */ - u32 or7; /* LBC Options 7 */ - u8 res1[40]; - u32 mar; /* LBC UPM Addr */ - u8 res2[4]; - u32 mamr; /* LBC UPMA Mode */ - u32 mbmr; /* LBC UPMB Mode */ - u32 mcmr; /* LBC UPMC Mode */ - u8 res3[8]; - u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */ - u32 mdr; /* LBC UPM Data */ - u8 res4[8]; - u32 lsdmr; /* LBC SDRAM Mode */ - u8 res5[8]; - u32 lurt; /* LBC UPM Refresh Timer */ - u32 lsrt; /* LBC SDRAM Refresh Timer */ - u8 res6[8]; - u32 ltesr; /* LBC Transfer Error Status */ - u32 ltedr; /* LBC Transfer Error Disable */ - u32 lteir; /* LBC Transfer Error IRQ */ - u32 lteatr; /* LBC Transfer Error Attrs */ - u32 ltear; /* LBC Transfer Error Addr */ - u8 res7[12]; - u32 lbcr; /* LBC Configuration */ - u32 lcrr; /* LBC Clock Ratio */ - u8 res8[3880]; -} ccsr_lbc_t; - /* eSPI Registers */ typedef struct ccsr_espi { u32 mode; /* eSPI mode */ @@ -2045,6 +2001,41 @@ enum { FSL_SRDS_B3_LANE_D = 23, }; +/* Security Engine Block (MS = Most Sig., LS = Least Sig.) */ +#if CONFIG_SYS_FSL_SEC_COMPAT >= 4 +typedef struct ccsr_sec { + u8 res1[0xfa0]; + u32 crnr_ms; /* CHA Revision Number Register, MS */ + u32 crnr_ls; /* CHA Revision Number Register, LS */ + u32 ctpr_ms; /* Compile Time Parameters Register, MS */ +#define SEC_CTPR_MS_AXI_LIODN 0x08000000 +#define SEC_CTPR_MS_QI 0x02000000 + u32 ctpr_ls; /* Compile Time Parameters Register, LS */ + u8 res2[0x10]; + u32 far_ms; /* Fault Address Register, MS */ + u32 far_ls; /* Fault Address Register, LS */ + u32 falr; /* Fault Address LIODN Register */ + u32 fadr; /* Fault Address Detail Register */ + u8 res3[0x4]; + u32 csta; /* CAAM Status Register */ + u8 res4[0x8]; + u32 rvid; /* Run Time Integrity Checking Version ID Reg.*/ +#define SEC_RVID_MA 0x0f000000 + u32 ccbvid; /* CHA Cluster Block Version ID Register */ + u32 chavid_ms; /* CHA Version ID Register, MS */ + u32 chavid_ls; /* CHA Version ID Register, LS */ + u32 chanum_ms; /* CHA Number Register, MS */ +#define SEC_CHANUM_MS_JQNUM_MASK 0xf0000000 +#define SEC_CHANUM_MS_JQNUM_SHIFT 28 +#define SEC_CHANUM_MS_DECONUM_MASK 0x0f000000 +#define SEC_CHANUM_MS_DECONUM_SHIFT 24 + u32 chanum_ls; /* CHA Number Register, LS */ + u32 caamvid_ms; /* CAAM Version ID Register, MS */ + u32 caamvid_ls; /* CAAM Version ID Register, LS */ + u8 res5[0xf000]; +} ccsr_sec_t; +#endif + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 @@ -2059,6 +2050,7 @@ enum { #define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000 #define CONFIG_SYS_MPC85xx_USB_OFFSET 0x210000 +#define CONFIG_SYS_FSL_SEC_OFFSET 0x300000 #define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000 #define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000 #define CONFIG_SYS_TSEC1_OFFSET 0x4e0000 /* FM1@DTSEC0 */ @@ -2111,7 +2103,7 @@ enum { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET) #define CONFIG_SYS_MPC85xx_DDR2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET) -#define CONFIG_SYS_MPC85xx_LBC_ADDR \ +#define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) #define CONFIG_SYS_MPC85xx_ESPI_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET) @@ -2143,6 +2135,8 @@ enum { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET) #define CONFIG_SYS_MPC85xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) +#define CONFIG_SYS_FSL_SEC_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET) #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index fd7acdb7674..b9e02dbc792 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -12,6 +12,7 @@ #include <asm/types.h> #include <asm/fsl_dma.h> +#include <asm/fsl_lbc.h> #include <asm/fsl_i2c.h> /* Local-Access Registers and MCM Registers(0x0000-0x2000) */ @@ -190,51 +191,6 @@ typedef struct ccsr_duart { char res5[2543]; } ccsr_duart_t; - -/* Local Bus Controller Registers(0x5000-0x6000) */ -typedef struct ccsr_lbc { - uint br0; /* 0x5000 - LBC Base Register 0 */ - uint or0; /* 0x5004 - LBC Options Register 0 */ - uint br1; /* 0x5008 - LBC Base Register 1 */ - uint or1; /* 0x500c - LBC Options Register 1 */ - uint br2; /* 0x5010 - LBC Base Register 2 */ - uint or2; /* 0x5014 - LBC Options Register 2 */ - uint br3; /* 0x5018 - LBC Base Register 3 */ - uint or3; /* 0x501c - LBC Options Register 3 */ - uint br4; /* 0x5020 - LBC Base Register 4 */ - uint or4; /* 0x5024 - LBC Options Register 4 */ - uint br5; /* 0x5028 - LBC Base Register 5 */ - uint or5; /* 0x502c - LBC Options Register 5 */ - uint br6; /* 0x5030 - LBC Base Register 6 */ - uint or6; /* 0x5034 - LBC Options Register 6 */ - uint br7; /* 0x5038 - LBC Base Register 7 */ - uint or7; /* 0x503c - LBC Options Register 7 */ - char res1[40]; - uint mar; /* 0x5068 - LBC UPM Address Register */ - char res2[4]; - uint mamr; /* 0x5070 - LBC UPMA Mode Register */ - uint mbmr; /* 0x5074 - LBC UPMB Mode Register */ - uint mcmr; /* 0x5078 - LBC UPMC Mode Register */ - char res3[8]; - uint mrtpr; /* 0x5084 - LBC Memory Refresh Timer Prescaler Register */ - uint mdr; /* 0x5088 - LBC UPM Data Register */ - char res4[8]; - uint lsdmr; /* 0x5094 - LBC SDRAM Mode Register */ - char res5[8]; - uint lurt; /* 0x50a0 - LBC UPM Refresh Timer */ - uint lsrt; /* 0x50a4 - LBC SDRAM Refresh Timer */ - char res6[8]; - uint ltesr; /* 0x50b0 - LBC Transfer Error Status Register */ - uint ltedr; /* 0x50b4 - LBC Transfer Error Disable Register */ - uint lteir; /* 0x50b8 - LBC Transfer Error Interrupt Register */ - uint lteatr; /* 0x50bc - LBC Transfer Error Attributes Register */ - uint ltear; /* 0x50c0 - LBC Transfer Error Address Register */ - char res7[12]; - uint lbcr; /* 0x50d0 - LBC Configuration Register */ - uint lcrr; /* 0x50d4 - LBC Clock Ratio Register */ - char res8[3880]; -} ccsr_lbc_t; - /* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */ typedef struct ccsr_pex { uint cfg_addr; /* 0x8000 - PEX Configuration Address Register */ @@ -1270,7 +1226,7 @@ typedef struct immap { ccsr_ddr_t im_ddr1; ccsr_i2c_t im_i2c; ccsr_duart_t im_duart; - ccsr_lbc_t im_lbc; + fsl_lbc_t im_lbc; ccsr_ddr_t im_ddr2; char res1[4096]; ccsr_pex_t im_pex1; @@ -1303,6 +1259,7 @@ extern immap_t *immr; #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 +#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 5166507f923..c01c85f6d3d 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -402,6 +402,7 @@ extern void print_bats(void); #define MAS1_TID(x) ((x << 16) & 0x3FFF0000) #define MAS1_TS 0x00001000 #define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) +#define TSIZE_TO_BYTES(x) ((phys_addr_t)(1UL << ((tsize * 2) + 10))) #define MAS2_EPN 0xFFFFF000 #define MAS2_X0 0x00000040 @@ -485,6 +486,7 @@ extern void init_tlbs(void); extern int find_tlb_idx(void *addr, u8 tlbsel); extern void init_used_tlb_cams(void); extern int find_free_tlbcam(void); +extern void print_tlbcam(void); extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg); diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h index 5388c951c84..3ffa30b9789 100644 --- a/arch/powerpc/include/asm/mp.h +++ b/arch/powerpc/include/asm/mp.h @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -26,5 +26,6 @@ void setup_mp(void); void cpu_mp_lmb_reserve(struct lmb *lmb); u32 determine_mp_bootpg(void); +int is_core_disabled(int nr); #endif diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 9ec319ae170..844552c2d24 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -534,9 +534,11 @@ #define SPRN_MCSRR0 0x23a /* Machine Check Save and Restore Register 0 */ #define SPRN_MCSRR1 0x23b /* Machine Check Save and Restore Register 1 */ #define SPRN_BUCSR 0x3f5 /* Branch Control and Status Register */ +#define BUCSR_STAC_EN 0x01000000 /* Segment target addr cache enable */ +#define BUCSR_LS_EN 0x00400000 /* Link stack enable */ #define BUCSR_BBFI 0x00000200 /* Branch buffer flash invalidate */ #define BUCSR_BPEN 0x00000001 /* Branch prediction enable */ -#define BUCSR_ENABLE (BUCSR_BBFI|BUCSR_BPEN) +#define BUCSR_ENABLE (BUCSR_STAC_EN|BUCSR_LS_EN|BUCSR_BBFI|BUCSR_BPEN) #define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ #define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ #define SPRN_PID1 0x279 /* Process ID Register 1 */ diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index c11a5c34995..4f7d935df3d 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -47,7 +47,7 @@ int board_early_init_f (void) int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); if ((uint)&gur->porpllsr != 0xe00e0000) { diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c index b0ebad72b2f..96698e72030 100644 --- a/board/esd/vme8349/vme8349.c +++ b/board/esd/vme8349/vme8349.c @@ -105,7 +105,7 @@ int misc_init_r() { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0); + clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0); return 0; } diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index df289aa634a..2d48d7ea328 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -42,6 +42,10 @@ COBJS-$(CONFIG_MPC8541CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8548CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8555CDS) += cds_pci_ft.o +COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o +COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o +COBJS-$(CONFIG_P1022DS) += ics307_clk.o +COBJS-$(CONFIG_P2020DS) += ics307_clk.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c new file mode 100644 index 00000000000..89d8810f74e --- /dev/null +++ b/board/freescale/common/ics307_clk.c @@ -0,0 +1,88 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +#include "ics307_clk.h" + +#ifdef CONFIG_FSL_NGPIXIS +#include "ngpixis.h" +#else +#include "pixis.h" +#endif + +/* decode S[0-2] to Output Divider (OD) */ +static u8 ics307_s_to_od[] = { + 10, 2, 8, 4, 5, 7, 3, 6 +}; + +/* + * Calculate frequency being generated by ICS307-02 clock chip based upon + * the control bytes being programmed into it. + */ +static unsigned long ics307_clk_freq(u8 cw0, u8 cw1, u8 cw2) +{ + const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ; + unsigned long vdw = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); + unsigned long rdw = cw2 & 0x7F; + unsigned long od = ics307_s_to_od[cw0 & 0x7]; + unsigned long freq; + + /* + * CLK1 Freq = Input Frequency * 2 * (VDW + 8) / ((RDW + 2) * OD) + * + * cw0: C1 C0 TTL F1 F0 S2 S1 S0 + * cw1: V8 V7 V6 V5 V4 V3 V2 V1 + * cw2: V0 R6 R5 R4 R3 R2 R1 R0 + * + * R6:R0 = Reference Divider Word (RDW) + * V8:V0 = VCO Divider Word (VDW) + * S2:S0 = Output Divider Select (OD) + * F1:F0 = Function of CLK2 Output + * TTL = duty cycle + * C1:C0 = internal load capacitance for cyrstal + * + */ + + freq = input_freq * 2 * (vdw + 8) / ((rdw + 2) * od); + + debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2, + freq); + return freq; +} + +unsigned long get_board_sys_clk(void) +{ + return ics307_clk_freq( + in_8(&pixis->sclk[0]), + in_8(&pixis->sclk[1]), + in_8(&pixis->sclk[2])); +} + +unsigned long get_board_ddr_clk(void) +{ + return ics307_clk_freq( + in_8(&pixis->dclk[0]), + in_8(&pixis->dclk[1]), + in_8(&pixis->dclk[2])); +} diff --git a/board/freescale/common/ics307_clk.h b/board/freescale/common/ics307_clk.h new file mode 100644 index 00000000000..db3dbc41f7f --- /dev/null +++ b/board/freescale/common/ics307_clk.h @@ -0,0 +1,30 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ICS_CLK_H_ +#define __ICS_CLK_H_ 1 + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(void); +extern unsigned long get_board_ddr_clk(void); +#endif + +#endif /* __ICS_CLK_H_ */ diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h index 3c59ea80283..089408b769d 100644 --- a/board/freescale/common/ngpixis.h +++ b/board/freescale/common/ngpixis.h @@ -45,7 +45,7 @@ typedef struct ngpixis { u8 sw; u8 en; } s[8]; -} ngpixis_t __attribute__ ((aligned(1))); +} __attribute__ ((packed)) ngpixis_t; /* Pointer to the PIXIS register set */ #define pixis ((ngpixis_t *)PIXIS_BASE) diff --git a/board/freescale/common/pixis.h b/board/freescale/common/pixis.h new file mode 100644 index 00000000000..7f86de79d44 --- /dev/null +++ b/board/freescale/common/pixis.h @@ -0,0 +1,182 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __PIXIS_H_ +#define __PIXIS_H_ 1 + +/* PIXIS register set. */ +#if defined(CONFIG_MPC8536DS) +typedef struct pixis { + u8 id; + u8 ver; + u8 pver; + u8 csr; + u8 rst; + u8 rst2; + u8 aux1; + u8 spd; + u8 aux2; + u8 csr2; + u8 watch; + u8 led; + u8 pwr; + u8 res[3]; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[3]; + u8 sclk[3]; + u8 dclk[3]; + u8 i2cdacr; + u8 vcoreacc[4]; + u8 vcorecnt[3]; + u8 vcoremax[2]; + u8 vplatacc[4]; + u8 vplatcnt[3]; + u8 vplatmax[2]; + u8 vtempacc[4]; + u8 vtempcnt[3]; + u8 vtempmax[2]; + u8 res2[4]; +} __attribute__ ((packed)) pixis_t; + +#elif defined(CONFIG_MPC8544DS) +typedef struct pixis { + u8 id; + u8 ver; + u8 pver; + u8 csr; + u8 rst; + u8 pwr; + u8 aux1; + u8 spd; + u8 res[8]; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[2]; + u8 vclkh; + u8 vclkl; + u8 watch; + u8 led; + u8 vspeed2; + u8 res2[34]; +} __attribute__ ((packed)) pixis_t; + +#elif defined(CONFIG_MPC8572DS) +typedef struct pixis { + u8 id; + u8 ver; + u8 pver; + u8 csr; + u8 rst; + u8 pwr1; + u8 aux1; + u8 spd; + u8 aux2; + u8 res[7]; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[3]; + u8 res2[2]; + u8 sclk[3]; + u8 dclk[3]; + u8 res3[2]; + u8 watch; + u8 led; + u8 res4[25]; +} __attribute__ ((packed)) pixis_t; + +#elif defined(CONFIG_MPC8610HPCD) +typedef struct pixis { + u8 id; + u8 ver; /* also called arch */ + u8 pver; + u8 csr; + u8 rst; + u8 pwr; + u8 aux; + u8 spd; + u8 brdcfg0; + u8 brdcfg1; + u8 res[4]; + u8 led; + u8 serno; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[2]; + u8 res2; + u8 sclk[3]; + u8 res3; + u8 watch; + u8 res4[33]; +} __attribute__ ((packed)) pixis_t; + +#elif defined(CONFIG_MPC8641HPCN) +typedef struct pixis { + u8 id; + u8 ver; + u8 pver; + u8 csr; + u8 rst; + u8 pwr; + u8 aux; + u8 spd; + u8 res[8]; + u8 vctl; + u8 vstat; + u8 vcfgen0; + u8 vcfgen1; + u8 vcore0; + u8 res1; + u8 vboot; + u8 vspeed[2]; + u8 vclkh; + u8 vclkl; + u8 watch; + u8 res3[36]; +} __attribute__ ((packed)) pixis_t; +#else +#error Need to define pixis_t for this board +#endif + +/* Pointer to the PIXIS register set */ +#define pixis ((pixis_t *)PIXIS_BASE) + +#endif /* __PIXIS_H_ */ diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 0c4fd6854d4..7aede136d6e 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -110,7 +110,7 @@ static long fixed_sdram(void) phys_size_t initdram(int board_type) { volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &im->lbus; + volatile fsl_lbc_t *lbc = &im->im_lbc; u32 msize; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 61d124960ff..365ac3792fa 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -192,7 +192,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; /* diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 7da39f18eb6..56475795b68 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -221,15 +221,14 @@ int misc_init_f(void) 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 }; volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbus = &immap->lbus; - lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM; - lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM; + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 */ - lbus->mamr = 0x08404440; + immap->im_lbc.mamr = 0x08404440; upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 4f557329f48..59ada9ca752 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -280,7 +280,7 @@ int checkboard(void) static int sdram_init(unsigned int base) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + fsl_lbc_t *lbc = LBC_BASE_ADDR; const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024; int rem = base % sdram_size; uint *sdram_addr; @@ -293,8 +293,8 @@ static int sdram_init(unsigned int base) /* * Setup SDRAM Base and Option Registers */ - immap->lbus.bank[2].br = base | CONFIG_SYS_BR2; - immap->lbus.bank[2].or = CONFIG_SYS_OR2; + set_lbc_br(2, base | CONFIG_SYS_BR2); + set_lbc_or(2, CONFIG_SYS_OR2); immap->sysconf.lblaw[2].bar = base; immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2; diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c index 9ffffb436cf..92d56a3dadc 100644 --- a/board/freescale/mpc8360erdk/nand.c +++ b/board/freescale/mpc8360erdk/nand.c @@ -82,9 +82,9 @@ static struct fsl_upm_nand fun = { int board_nand_init(struct nand_chip *nand) { - fun.upm.mxmr = &im->lbus.mamr; - fun.upm.mdr = &im->lbus.mdr; - fun.upm.mar = &im->lbus.mar; + fun.upm.mxmr = &im->im_lbc.mamr; + fun.upm.mdr = &im->im_lbc.mdr; + fun.upm.mar = &im->im_lbc.mar; upm_setup(&fun.upm); diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 1968106711e..50ca3cae9fc 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -350,154 +350,6 @@ int board_early_init_r(void) return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char -ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2) -{ - const unsigned long long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VSYSCLK0), - in_8(pixis_base + PIXIS_VSYSCLK1), - in_8(pixis_base + PIXIS_VSYSCLK2) - ); -} - -unsigned long -get_board_ddr_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VDDRCLK0), - in_8(pixis_base + PIXIS_VDDRCLK1), - in_8(pixis_base + PIXIS_VDDRCLK2) - ); -} -#else -unsigned long -get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x07; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - - return val; -} - -unsigned long -get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x38; - i >>= 3; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; -} -#endif - int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 9e3f67768cf..f9ff827f474 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -117,7 +117,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -176,7 +176,7 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); @@ -185,8 +185,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index c30d966b6e6..0580fe72395 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -291,7 +291,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -340,7 +340,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -352,16 +352,11 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 0be2d892d30..581d5f26edb 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -40,7 +40,7 @@ int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); u8 vboot; u8 *pixis_base = (u8 *)PIXIS_BASE; diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index aa3f32bf678..f0169959af4 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -118,7 +118,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -154,7 +154,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -166,16 +166,11 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index ecddd0d9c43..b7e0e0cd82b 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -291,7 +291,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -340,7 +340,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -352,12 +352,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 2bca0f28ebf..489f90b14be 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -322,7 +322,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -381,7 +381,7 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); @@ -390,8 +390,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 4ec13a96914..036bf9528b7 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -181,7 +181,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -214,7 +214,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; @@ -225,16 +225,13 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); asm("msync"); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 1eddeef37f3..81e8ff51e9f 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -308,7 +308,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 6029a5185c2..81d481a1719 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -284,149 +284,6 @@ int board_early_init_r(void) return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2) -{ - const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long get_board_sys_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VSYSCLK0), - in_8(pixis_base + PIXIS_VSYSCLK1), - in_8(pixis_base + PIXIS_VSYSCLK2) - ); -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - u8 *pixis_base = (u8 *)PIXIS_BASE; - - return ics307_clk_freq ( - in_8(pixis_base + PIXIS_VDDRCLK0), - in_8(pixis_base + PIXIS_VDDRCLK1), - in_8(pixis_base + PIXIS_VDDRCLK2) - ); -} -#else -unsigned long get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x07; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - - return val; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - i = in_8(pixis_base + PIXIS_SPD); - i &= 0x38; - i >>= 3; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; -} -#endif - #ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile new file mode 100644 index 00000000000..8ede2d6055d --- /dev/null +++ b/board/freescale/p1022ds/Makefile @@ -0,0 +1,39 @@ +# +# Copyright 2010 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/p1022ds/config.mk b/board/freescale/p1022ds/config.mk new file mode 100644 index 00000000000..4581d20c3f6 --- /dev/null +++ b/board/freescale/p1022ds/config.mk @@ -0,0 +1,14 @@ +# +# Copyright 2010 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) +# any later version. +# + +ifndef TEXT_BASE +TEXT_BASE = 0xeff80000 +endif + +RESET_VECTOR_ADDRESS = 0xeffffffc diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c new file mode 100644 index 00000000000..7ecfb3e81b5 --- /dev/null +++ b/board/freescale/p1022ds/ddr.c @@ -0,0 +1,106 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, unsigned int ctrl_num) +{ + int ret; + + /* + * The P1022 has only one DDR controller, and the board has only one + * DIMM slot. + */ + ret = i2c_read(SPD_EEPROM_ADDRESS1, 0, 1, (u8 *)ctrl_dimms_spd, + sizeof(ddr3_spd_eeprom_t)); + if (ret) { + debug("DDR: failed to read SPD from address %u\n", + SPD_EEPROM_ADDRESS1); + memset(ctrl_dimms_spd, 0, sizeof(ddr3_spd_eeprom_t)); + } +} + +typedef struct { + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; /* Range: 0-8 */ + u32 cpo; /* Range: 2-31 */ + u32 write_data_delay; /* Range: 0-6 */ + u32 force_2T; +} board_specific_parameters_t; + +static const board_specific_parameters_t bsp[] = { +/* + * lo| hi| num| clk| cpo|wrdata|2T + * mhz| mhz|ranks|adjst| | delay| + */ + { 0, 333, 1, 5, 31, 3, 0}, + {334, 400, 1, 5, 31, 3, 0}, + {401, 549, 1, 5, 31, 3, 0}, + {550, 680, 1, 5, 31, 5, 0}, + {681, 850, 1, 5, 31, 5, 0}, + { 0, 333, 2, 5, 31, 3, 0}, + {334, 400, 2, 5, 31, 3, 0}, + {401, 549, 2, 5, 31, 3, 0}, + {550, 680, 2, 5, 31, 5, 0}, + {681, 850, 2, 5, 31, 5, 0}, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + unsigned long ddr_freq; + unsigned int i; + + /* set odt_rd_cfg and odt_wr_cfg. */ + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 1; + } + + /* + * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + for (i = 0; i < ARRAY_SIZE(bsp); i++) { + if (ddr_freq >= bsp[i].datarate_mhz_low && + ddr_freq <= bsp[i].datarate_mhz_high && + pdimm->n_ranks == bsp[i].n_ranks) { + popts->clk_adjust = bsp[i].clk_adjust; + popts->cpo_override = bsp[i].cpo; + popts->write_data_delay = bsp[i].write_data_delay; + popts->twoT_en = bsp[i].force_2T; + break; + } + } + + popts->half_strength_driver_enable = 1; + + /* Per AN4039, enable ZQ calibration. */ + popts->zq_en = 1; + + /* + * For wake-up on ARP, we need auto self refresh enabled + */ + popts->auto_self_refresh_en = 1; + popts->sr_it = 0xb; +} diff --git a/board/freescale/p1022ds/law.c b/board/freescale/p1022ds/law.c new file mode 100644 index 00000000000..b23b8f9af5d --- /dev/null +++ b/board/freescale/p1022ds/law.c @@ -0,0 +1,21 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c new file mode 100644 index 00000000000..be692cb4584 --- /dev/null +++ b/board/freescale/p1022ds/p1022ds.c @@ -0,0 +1,354 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/io.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <tsec.h> +#include <asm/fsl_law.h> +#include <asm/mp.h> +#include <netdev.h> +#include <i2c.h> + +#include "../common/ngpixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, 0x1000); + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + + /* Set the pin muxing to enable ETSEC2. */ + clrbits_be32(&gur->pmuxcr2, 0x001F8000); + + return 0; +} + +int checkboard(void) +{ + u8 sw; + + puts("Board: P1022DS "); + + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); + + sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); + + switch ((sw & PIXIS_LBMAP_MASK) >> 6) { + case 0: + printf ("vBank: %u\n", ((sw & 0x30) >> 4)); + break; + case 1: + printf ("NAND\n"); + break; + case 2: + case 3: + puts ("Promjet\n"); + break; + } + + return 0; +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size = 0; + + puts("Initializing....\n"); + + dram_size = fsl_ddr_sdram(); + dram_size = setup_ddr_tlbs(dram_size / 0x100000) * 0x100000; + + puts(" DDR: "); + return dram_size; +} + +#define CONFIG_TFP410_I2C_ADDR 0x38 + +int misc_init_r(void) +{ + u8 temp; + + /* Enable the TFP410 Encoder */ + + temp = 0xBF; + if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0) + return -1; + + /* Verify if enabled */ + temp = 0; + if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0) + return -1; + + debug("DVI Encoder Read: 0x%02x\n", temp); + + temp = 0x10; + if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0) + return -1; + + /* Verify if enabled */ + temp = 0; + if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0) + return -1; + + debug("DVI Encoder Read: 0x%02x\n",temp); + + return 0; +} + +/* + * A list of PCI and SATA slots + */ +enum slot_id { + SLOT_PCIE1 = 1, + SLOT_PCIE2, + SLOT_PCIE3, + SLOT_PCIE4, + SLOT_PCIE5, + SLOT_SATA1, + SLOT_SATA2 +}; + +/* + * This array maps the slot identifiers to their names on the P1022DS board. + */ +static const char *slot_names[] = { + [SLOT_PCIE1] = "Slot 1", + [SLOT_PCIE2] = "Slot 2", + [SLOT_PCIE3] = "Slot 3", + [SLOT_PCIE4] = "Slot 4", + [SLOT_PCIE5] = "Mini-PCIe", + [SLOT_SATA1] = "SATA 1", + [SLOT_SATA2] = "SATA 2", +}; + +/* + * This array maps a given SERDES configuration and SERDES device to the PCI or + * SATA slot that it connects to. This mapping is hard-coded in the FPGA. + */ +static u8 serdes_dev_slot[][SATA2 + 1] = { + [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 }, + [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4, + [PCIE2] = SLOT_PCIE5 }, + [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, + [PCIE2] = SLOT_PCIE3, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, + [PCIE2] = SLOT_PCIE3 }, + [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3, + [PCIE2] = SLOT_PCIE3, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x1c] = { [PCIE1] = SLOT_PCIE1, + [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, + [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 }, + [0x1f] = { [PCIE1] = SLOT_PCIE1 }, +}; + + +/* + * Returns the name of the slot to which the PCIe or SATA controller is + * connected + */ +const char *serdes_slot_name(enum srds_prtcl device) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + enum slot_id slot = serdes_dev_slot[srds_cfg][device]; + const char *name = slot_names[slot]; + + if (name) + return name; + else + return "Nothing"; +} + +static void configure_pcie(struct fsl_pci_info *info, + struct pci_controller *hose, + const char *connected) +{ + static int bus_number = 0; + int is_endpoint; + + set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law); + set_next_law(info->io_phys, law_size_bits(info->io_size), info->law); + is_endpoint = fsl_setup_hose(hose, info->regs); + printf(" PCIE%u connected to %s as %s (base addr %lx)\n", + info->pci_num, connected, + is_endpoint ? "Endpoint" : "Root Complex", info->regs); + bus_number = fsl_pci_init_port(info, hose, bus_number); +} + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif + +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif + +#ifdef CONFIG_PCIE3 +static struct pci_controller pcie3_hose; +#endif + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + struct fsl_pci_info pci_info; + u32 devdisr = in_be32(&gur->devdisr); + +#ifdef CONFIG_PCIE1 + if (is_serdes_configured(PCIE1) && !(devdisr & MPC85xx_DEVDISR_PCIE)) { + SET_STD_PCIE_INFO(pci_info, 1); + configure_pcie(&pci_info, &pcie1_hose, serdes_slot_name(PCIE1)); + } else { + printf(" PCIE1: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ +#endif + +#ifdef CONFIG_PCIE2 + if (is_serdes_configured(PCIE2) && !(devdisr & MPC85xx_DEVDISR_PCIE2)) { + SET_STD_PCIE_INFO(pci_info, 2); + configure_pcie(&pci_info, &pcie2_hose, serdes_slot_name(PCIE2)); + } else { + printf(" PCIE2: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ +#endif + +#ifdef CONFIG_PCIE3 + if (is_serdes_configured(PCIE3) && !(devdisr & MPC85xx_DEVDISR_PCIE3)) { + SET_STD_PCIE_INFO(pci_info, 3); + configure_pcie(&pci_info, &pcie3_hose, serdes_slot_name(PCIE3)); + } else { + printf(" PCIE3: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ +#endif +} +#endif + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + return 0; +} + +/* + * Initialize on-board and/or PCI Ethernet devices + * + * Returns: + * <0, error + * 0, no ethernet devices found + * >0, number of ethernet devices initialized + */ +int board_eth_init(bd_t *bis) +{ + struct tsec_info_struct tsec_info[2]; + unsigned int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif + + return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis); +} + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCIE1 + ft_fsl_pci_setup(blob, "pci0", &pcie1_hose); +#else + ft_fsl_pci_setup(blob, "pci0", NULL); +#endif + +#ifdef CONFIG_PCIE2 + ft_fsl_pci_setup(blob, "pci1", &pcie2_hose); +#else + ft_fsl_pci_setup(blob, "pci1", NULL); +#endif + +#ifdef CONFIG_PCIE3 + ft_fsl_pci_setup(blob, "pci2", &pcie3_hose); +#else + ft_fsl_pci_setup(blob, "pci2", NULL); +#endif + +#ifdef CONFIG_FSL_SGMII_RISER + fsl_sgmii_riser_fdt_fixup(blob); +#endif +} +#endif + +#ifdef CONFIG_MP +void board_lmb_reserve(struct lmb *lmb) +{ + cpu_mp_lmb_reserve(lmb); +} +#endif diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c new file mode 100644 index 00000000000..e6201127a93 --- /dev/null +++ b/board/freescale/p1022ds/tlb.c @@ -0,0 +1,76 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* W**G* - Flash/promjet, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, + CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, + CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_4K, 1), +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index f0ff209c0c2..be4b2eb478b 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -313,155 +313,6 @@ int board_early_init_r(void) return 0; } -#ifdef CONFIG_GET_CLK_FROM_ICS307 -/* decode S[0-2] to Output Divider (OD) */ -static unsigned char ics307_S_to_OD[] = { - 10, 2, 8, 4, 5, 7, 3, 6 -}; - -/* Calculate frequency being generated by ICS307-02 clock chip based upon - * the control bytes being programmed into it. */ -/* XXX: This function should probably go into a common library */ -static unsigned long -ics307_clk_freq(unsigned char cw0, unsigned char cw1, unsigned char cw2) -{ - const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ; - unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1); - unsigned long RDW = cw2 & 0x7F; - unsigned long OD = ics307_S_to_OD[cw0 & 0x7]; - unsigned long freq; - - /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */ - - /* cw0: C1 C0 TTL F1 F0 S2 S1 S0 - * cw1: V8 V7 V6 V5 V4 V3 V2 V1 - * cw2: V0 R6 R5 R4 R3 R2 R1 R0 - * - * R6:R0 = Reference Divider Word (RDW) - * V8:V0 = VCO Divider Word (VDW) - * S2:S0 = Output Divider Select (OD) - * F1:F0 = Function of CLK2 Output - * TTL = duty cycle - * C1:C0 = internal load capacitance for cyrstal - */ - - /* Adding 1 to get a "nicely" rounded number, but this needs - * more tweaking to get a "properly" rounded number. */ - - freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD)); - - debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2, - freq); - return freq; -} - -unsigned long get_board_sys_clk(ulong dummy) -{ - return gd->bus_clk; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - return gd->mem_clk; -} - -unsigned long calculate_board_sys_clk(ulong dummy) -{ - ulong val; - - val = ics307_clk_freq(in_8(&pixis->sclk[0]), in_8(&pixis->sclk[1]), - in_8(&pixis->sclk[2])); - debug("sysclk val = %lu\n", val); - return val; -} - -unsigned long calculate_board_ddr_clk(ulong dummy) -{ - ulong val; - - val = ics307_clk_freq(in_8(&pixis->dclk[0]), in_8(&pixis->dclk[1]), - in_8(&pixis->dclk[2])); - debug("ddrclk val = %lu\n", val); - return val; -} -#else -unsigned long get_board_sys_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - - i = in_8(&pixis->spd); - i &= 0x07; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - - return val; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - u8 i; - ulong val = 0; - - i = in_8(&pixis->spd); - i &= 0x38; - i >>= 3; - - switch (i) { - case 0: - val = 33333333; - break; - case 1: - val = 40000000; - break; - case 2: - val = 50000000; - break; - case 3: - val = 66666666; - break; - case 4: - val = 83333333; - break; - case 5: - val = 100000000; - break; - case 6: - val = 133333333; - break; - case 7: - val = 166666666; - break; - } - return val; -} -#endif - #ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c index 7c272334aa5..054d644d951 100644 --- a/board/mpc8540eval/mpc8540eval.c +++ b/board/mpc8540eval/mpc8540eval.c @@ -69,7 +69,7 @@ phys_size_t initdram (int board_type) long dram_size = 0; #if !defined(CONFIG_RAM_AS_FLASH) - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sysinfo; uint temp_lbcdll = 0; #endif @@ -110,8 +110,8 @@ phys_size_t initdram (int board_type) gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } - lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index 5353d738b4c..a302b917677 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -134,7 +134,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c index b14a3d34b1f..f9d92d99846 100644 --- a/board/pm856/pm856.c +++ b/board/pm856/pm856.c @@ -290,7 +290,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 34861d4e157..50fae7c3673 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -160,7 +160,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts("\n SDRAM on Local Bus: "); diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 194f6ab961f..d62cfd1befa 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -116,7 +116,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -152,7 +152,7 @@ sdram_init(void) #if defined(CONFIG_SYS_LBC_SDRAM_SIZE) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; @@ -163,22 +163,14 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); - asm("msync"); - - out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); - asm("msync"); - - out_be32(&lbc->or4, CONFIG_SYS_OR4_PRELIM); - asm("msync"); - - out_be32(&lbc->br4, CONFIG_SYS_BR4_PRELIM); - asm("msync"); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); asm("msync"); - out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT); out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); asm("msync"); diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index c40b5e38ddd..10ba62fa493 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -269,7 +269,7 @@ phys_size_t initdram (int board_type) #if 0 #if !defined(CONFIG_RAM_AS_FLASH) - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sysinfo; uint temp_lbcdll = 0; #endif @@ -310,8 +310,8 @@ phys_size_t initdram (int board_type) gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } - lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); diff --git a/board/sheldon/simpc8313/sdram.c b/board/sheldon/simpc8313/sdram.c index ebb70a2327b..ba59943c808 100644 --- a/board/sheldon/simpc8313/sdram.c +++ b/board/sheldon/simpc8313/sdram.c @@ -129,7 +129,7 @@ void si_read_i2c(u32 lbyte, int count, u8 *buffer) phys_size_t initdram(int board_type) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc= &im->lbus; + volatile fsl_lbc_t *lbc = &im->im_lbc; u32 msize; if ((__raw_readl(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32) im) diff --git a/board/sheldon/simpc8313/simpc8313.c b/board/sheldon/simpc8313/simpc8313.c index cb30b488597..c2164c9c854 100644 --- a/board/sheldon/simpc8313/simpc8313.c +++ b/board/sheldon/simpc8313/simpc8313.c @@ -93,7 +93,7 @@ int misc_init_r(void) { int rc = 0; immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - fsl_lbus_t *lbus = &immap->lbus; + fsl_lbc_t *lbus = &immap->im_lbc; u32 *mxmr = &lbus->mamr; /* Pointer to mamr */ /* UPM Table Configuration Code */ diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 9183c15f2a4..72e7401f14c 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -87,8 +87,6 @@ int checkboard (void) int misc_init_r (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - /* * Adjust flash start and offset to detected values */ @@ -99,8 +97,10 @@ int misc_init_r (void) * Check if boot FLASH isn't max size */ if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) { - memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff); - memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff); + set_lbc_or(0, gd->bd->bi_flashstart | + (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); + set_lbc_br(0, gd->bd->bi_flashstart | + (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); /* * Re-check to get correct base address @@ -112,8 +112,8 @@ int misc_init_r (void) * Check if only one FLASH bank is available */ if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) { - memctl->or1 = 0; - memctl->br1 = 0; + set_lbc_or(1, 0); + set_lbc_br(1, 0); /* * Re-do flash protection upon new addresses @@ -148,7 +148,7 @@ int misc_init_r (void) */ void local_bus_init (void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); sys_info_t sysinfo; uint clkdiv; @@ -299,26 +299,25 @@ const gdc_regs *board_get_regs (void) int lime_probe(void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint cfg_br2; uint cfg_or2; int type; - cfg_br2 = memctl->br2; - cfg_or2 = memctl->or2; + cfg_br2 = get_lbc_br(2); + cfg_or2 = get_lbc_or(2); /* Configure GPCM for CS2 */ - memctl->br2 = 0; - memctl->or2 = 0xfc000410; - memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901; + set_lbc_br(2, 0); + set_lbc_or(2, 0xfc000410); + set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901); /* Get controller type */ type = mb862xx_probe(CONFIG_SYS_LIME_BASE); /* Restore previous CS2 configuration */ - memctl->br2 = 0; - memctl->or2 = cfg_or2; - memctl->br2 = cfg_br2; + set_lbc_br(2, 0); + set_lbc_or(2, cfg_or2); + set_lbc_br(2, cfg_br2); return (type == MB862XX_TYPE_LIME) ? 1 : 0; } diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c index e5648799a65..8d046f482f4 100644 --- a/board/tqc/tqm834x/tqm834x.c +++ b/board/tqc/tqm834x/tqm834x.c @@ -253,10 +253,10 @@ static int detect_num_flash_banks(void) debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks); /* set OR0 and BR0 */ - im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH | - (-(total_size) & OR_GPCM_AM); - im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) | - (BR_MS_GPCM | BR_PS_32 | BR_V); + set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH | + (-(total_size) & OR_GPCM_AM)); + set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) | + (BR_MS_GPCM | BR_PS_32 | BR_V)); return (0); } diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c index 3da689a9e46..4b16c31de28 100644 --- a/board/tqc/tqm85xx/nand.c +++ b/board/tqc/tqm85xx/nand.c @@ -377,7 +377,7 @@ volatile const u32 *nand_upm_patt; */ static void upmb_write (u_char addr, ulong val) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; out_be32 (&lbc->mdr, val); @@ -393,14 +393,14 @@ static void upmb_write (u_char addr, ulong val) /* * Initialize UPM for NAND flash access. */ -static void nand_upm_setup (volatile ccsr_lbc_t *lbc) +static void nand_upm_setup (volatile fsl_lbc_t *lbc) { uint i, j; uint or3 = CONFIG_SYS_OR3_PRELIM; uint clock = get_lbc_clock (); - out_be32 (&lbc->br3, 0); /* disable bank and reset all bits */ - out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM); + set_lbc_br(3, 0); /* disable bank and reset all bits */ + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); /* * Search appropriate UPM table for bus clock. @@ -424,7 +424,7 @@ static void nand_upm_setup (volatile ccsr_lbc_t *lbc) /* EAD must be set due to TQM8548 timing specification */ or3 |= OR_UPM_EAD; - out_be32 (&lbc->or3, or3); + set_lbc_or(3, or3); /* Assign address of table */ nand_upm_patt = upm_freq_table[i].upm_patt; @@ -458,7 +458,7 @@ void board_nand_select_device (struct nand_chip *nand, int chip) int board_nand_init (struct nand_chip *nand) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; if (!nand_upm_patt) nand_upm_setup (lbc); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 8c9d586925a..fc2a6cbdb54 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -269,8 +269,6 @@ int checkboard (void) int misc_init_r (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - /* * Adjust flash start and offset to detected values */ @@ -281,26 +279,27 @@ int misc_init_r (void) * Recalculate CS configuration if second FLASH bank is available */ if (flash_info[0].size > 0) { - memctl->or1 = ((-flash_info[0].size) & 0xffff8000) | - (CONFIG_SYS_OR1_PRELIM & 0x00007fff); - memctl->br1 = gd->bd->bi_flashstart | - (CONFIG_SYS_BR1_PRELIM & 0x00007fff); + set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) | + (CONFIG_SYS_OR1_PRELIM & 0x00007fff)); + set_lbc_br(1, gd->bd->bi_flashstart | + (CONFIG_SYS_BR1_PRELIM & 0x00007fff)); /* * Re-check to get correct base address for bank 1 */ flash_get_size (gd->bd->bi_flashstart, 0); } else { - memctl->or1 = 0; - memctl->br1 = 0; + set_lbc_or(1, 0); + set_lbc_br(1, 0); } /* * If bank 1 is equipped, bank 0 is mapped after bank 1 */ - memctl->or0 = ((-flash_info[1].size) & 0xffff8000) | - (CONFIG_SYS_OR0_PRELIM & 0x00007fff); - memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) | - (CONFIG_SYS_BR0_PRELIM & 0x00007fff); + set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) | + (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); + set_lbc_br(0, gd->bd->bi_flashstart | + (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); + /* * Re-check to get correct base address for bank 0 */ @@ -341,7 +340,7 @@ int misc_init_r (void) */ static void upmc_write (u_char addr, uint val) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; out_be32 (&lbc->mdr, val); @@ -358,7 +357,7 @@ static void upmc_write (u_char addr, uint val) uint get_lbc_clock (void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sys_info; ulong clkdiv = lbc->lcrr & LCRR_CLKDIV; @@ -386,7 +385,7 @@ uint get_lbc_clock (void) void local_bus_init (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint lbc_mhz = get_lbc_clock () / 1000000; #ifdef CONFIG_MPC8548 @@ -502,10 +501,10 @@ void local_bus_init (void) * set if Local Bus Clock is > 83 MHz. */ if (lbc_mhz > 83) - out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); + set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); else - out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN); - out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN); + set_lbc_or(2, CONFIG_SYS_OR2_CAN); + set_lbc_br(2, CONFIG_SYS_BR2_CAN); /* LGPL4 is UPWAIT */ out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X); diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite5170/xpedite5170.c index f4231a9a7a6..58229418f36 100644 --- a/board/xes/xpedite5170/xpedite5170.c +++ b/board/xes/xpedite5170/xpedite5170.c @@ -56,8 +56,6 @@ int checkboard(void) */ static void flash_cs_fixup(void) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - ccsr_lbc_t *lbc = &immap->im_lbc; int flash_sel; /* @@ -70,11 +68,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite5200/xpedite5200.c index 71097715155..a2627f86736 100644 --- a/board/xes/xpedite5200/xpedite5200.c +++ b/board/xes/xpedite5200/xpedite5200.c @@ -38,7 +38,7 @@ extern void ft_board_pci_setup(void *blob, bd_t *bd); int checkboard(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); char *s; @@ -65,7 +65,6 @@ int checkboard(void) static void flash_cs_fixup(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); int flash_sel; /* @@ -78,11 +77,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite5370/xpedite5370.c index 48d9fc8c73a..2a060c24625 100644 --- a/board/xes/xpedite5370/xpedite5370.c +++ b/board/xes/xpedite5370/xpedite5370.c @@ -58,7 +58,6 @@ int checkboard(void) static void flash_cs_fixup(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); int flash_sel; /* @@ -71,11 +70,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/boards.cfg b/boards.cfg index d7c9c4699a6..8aab169aaea 100644 --- a/boards.cfg +++ b/boards.cfg @@ -346,6 +346,7 @@ MPC8560ADS powerpc mpc85xx mpc8560ads freescale MPC8568MDS powerpc mpc85xx mpc8568mds freescale XPEDITE5200 powerpc mpc85xx xpedite5200 xes XPEDITE5370 powerpc mpc85xx xpedite5370 xes +P1022DS powerpc mpc85xx p1022ds freescale sbc8641d powerpc mpc86xx MPC8610HPCD powerpc mpc86xx mpc8610hpcd freescale XPEDITE5170 powerpc mpc86xx xpedite5170 xes diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 94b8d586986..908876ce45d 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -33,6 +33,8 @@ extern void ppc4xx_reginfo(void); #include <mpc5xxx.h> #elif defined (CONFIG_MPC86xx) extern void mpc86xx_reginfo(void); +#elif defined(CONFIG_MPC85xx) +extern void mpc85xx_reginfo(void); #endif int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -183,6 +185,9 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #elif defined(CONFIG_MPC86xx) mpc86xx_reginfo(); +#elif defined(CONFIG_MPC85xx) + mpc85xx_reginfo(); + #elif defined(CONFIG_BLACKFIN) puts("\nSystem Configuration registers\n"); diff --git a/common/fdt_support.c b/common/fdt_support.c index a8ac617da58..4d87135cb79 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -474,135 +474,6 @@ void fdt_fixup_ethernet(void *fdt) } } -#ifdef CONFIG_HAS_FSL_DR_USB -void fdt_fixup_dr_usb(void *blob, bd_t *bd) -{ - char *mode; - char *type; - const char *compat = "fsl-usb2-dr"; - const char *prop_mode = "dr_mode"; - const char *prop_type = "phy_type"; - int node_offset; - int err; - - mode = getenv("usb_dr_mode"); - type = getenv("usb_phy_type"); - if (!mode && !type) - return; - - node_offset = fdt_node_offset_by_compatible(blob, 0, compat); - if (node_offset < 0) { - printf("WARNING: could not find compatible node %s: %s.\n", - compat, fdt_strerror(node_offset)); - return; - } - - if (mode) { - err = fdt_setprop(blob, node_offset, prop_mode, mode, - strlen(mode) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_mode, compat, fdt_strerror(err)); - } - - if (type) { - err = fdt_setprop(blob, node_offset, prop_type, type, - strlen(type) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_type, compat, fdt_strerror(err)); - } -} -#endif /* CONFIG_HAS_FSL_DR_USB */ - -#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) -/* - * update crypto node properties to a specified revision of the SEC - * called with sec_rev == 0 if not on an mpc8xxxE processor - */ -void fdt_fixup_crypto_node(void *blob, int sec_rev) -{ - const struct sec_rev_prop { - u32 sec_rev; - u32 num_channels; - u32 channel_fifo_len; - u32 exec_units_mask; - u32 descriptor_types_mask; - } sec_rev_prop_list [] = { - { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ - { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ - { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ - { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ - { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ - { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ - { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ - }; - char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * - sizeof("fsl,secX.Y")]; - int crypto_node, sec_idx, err; - char *p; - u32 val; - - /* locate crypto node based on lowest common compatible */ - crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); - if (crypto_node == -FDT_ERR_NOTFOUND) - return; - - /* delete it if not on an E-processor */ - if (crypto_node > 0 && !sec_rev) { - fdt_del_node(blob, crypto_node); - return; - } - - /* else we got called for possible uprev */ - for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) - if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) - break; - - if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { - puts("warning: unknown SEC revision number\n"); - return; - } - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); - err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); - err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); - err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); - err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = 0; - while (sec_idx >= 0) { - p = compat_strlist + val; - val += sprintf(p, "fsl,sec%d.%d", - (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, - sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; - sec_idx--; - } - err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); -} -#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */ - /* Resize the fdt to its actual size + a bit of padding */ int fdt_resize(void *blob) { diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index 8255175d2a0..628bd5964cc 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -50,86 +50,61 @@ DECLARE_GLOBAL_DATA_PTR; #endif #ifdef CONFIG_FSL_CORENET -void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id) -{ - volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); - - gd->used_laws |= (1 << idx); +#define LAW_BASE (CONFIG_SYS_FSL_CORENET_CCM_ADDR) +#define LAWAR_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawar) +#define LAWBARH_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarh) +#define LAWBARL_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarl) +#define LAWBAR_SHIFT 0 +#else +#define LAW_BASE (CONFIG_SYS_IMMR + 0xc08) +#define LAWAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x + 2) +#define LAWBAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x) +#define LAWBAR_SHIFT 12 +#endif - out_be32(&ccm->law[idx].lawar, 0); - out_be32(&ccm->law[idx].lawbarh, ((u64)addr >> 32)); - out_be32(&ccm->law[idx].lawbarl, addr & 0xffffffff); - out_be32(&ccm->law[idx].lawar, LAW_EN | ((u32)id << 20) | (u32)sz); - /* Read back so that we sync the writes */ - in_be32(&ccm->law[idx].lawar); -} - -void disable_law(u8 idx) +static inline phys_addr_t get_law_base_addr(int idx) { - volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); - - gd->used_laws &= ~(1 << idx); - - out_be32(&ccm->law[idx].lawar, 0); - out_be32(&ccm->law[idx].lawbarh, 0); - out_be32(&ccm->law[idx].lawbarl, 0); - - /* Read back so that we sync the writes */ - in_be32(&ccm->law[idx].lawar); - - return; +#ifdef CONFIG_FSL_CORENET + return (phys_addr_t) + ((u64)in_be32(LAWBARH_ADDR(idx)) << 32) | + in_be32(LAWBARL_ADDR(idx)); +#else + return (phys_addr_t)in_be32(LAWBAR_ADDR(idx)) << LAWBAR_SHIFT; +#endif } -#ifndef CONFIG_NAND_SPL -static int get_law_entry(u8 i, struct law_entry *e) +static inline void set_law_base_addr(int idx, phys_addr_t addr) { - volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); - u32 lawar; - - lawar = in_be32(&ccm->law[i].lawar); - - if (!(lawar & LAW_EN)) - return 0; - - e->addr = ((u64)in_be32(&ccm->law[i].lawbarh) << 32) | - in_be32(&ccm->law[i].lawbarl); - e->size = lawar & 0x3f; - e->trgt_id = (lawar >> 20) & 0xff; - - return 1; -} -#endif +#ifdef CONFIG_FSL_CORENET + out_be32(LAWBARL_ADDR(idx), addr & 0xffffffff); + out_be32(LAWBARH_ADDR(idx), (u64)addr >> 32); #else + out_be32(LAWBAR_ADDR(idx), addr >> LAWBAR_SHIFT); +#endif +} + void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base + 8 * idx; - volatile u32 *lawar = base + 8 * idx + 2; - gd->used_laws |= (1 << idx); - out_be32(lawar, 0); - out_be32(lawbar, addr >> 12); - out_be32(lawar, LAW_EN | ((u32)id << 20) | (u32)sz); + out_be32(LAWAR_ADDR(idx), 0); + set_law_base_addr(idx, addr); + out_be32(LAWAR_ADDR(idx), LAW_EN | ((u32)id << 20) | (u32)sz); /* Read back so that we sync the writes */ - in_be32(lawar); + in_be32(LAWAR_ADDR(idx)); } void disable_law(u8 idx) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base + 8 * idx; - volatile u32 *lawar = base + 8 * idx + 2; - gd->used_laws &= ~(1 << idx); - out_be32(lawar, 0); - out_be32(lawbar, 0); + out_be32(LAWAR_ADDR(idx), 0); + set_law_base_addr(idx, 0); /* Read back so that we sync the writes */ - in_be32(lawar); + in_be32(LAWAR_ADDR(idx)); return; } @@ -137,24 +112,20 @@ void disable_law(u8 idx) #ifndef CONFIG_NAND_SPL static int get_law_entry(u8 i, struct law_entry *e) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base + 8 * i; - volatile u32 *lawar = base + 8 * i + 2; - u32 temp; + u32 lawar; - temp = in_be32(lawar); + lawar = in_be32(LAWAR_ADDR(i)); - if (!(temp & LAW_EN)) + if (!(lawar & LAW_EN)) return 0; - e->addr = (u64)in_be32(lawbar) << 12; - e->size = temp & 0x3f; - e->trgt_id = (temp >> 20) & 0xff; + e->addr = get_law_base_addr(i); + e->size = lawar & 0x3f; + e->trgt_id = (lawar >> 20) & 0xff; return 1; } #endif -#endif int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { @@ -216,17 +187,23 @@ struct law_entry find_law(phys_addr_t addr) void print_laws(void) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base; - volatile u32 *lawar = base + 2; int i; + u32 lawar; printf("\nLocal Access Window Configuration\n"); - for(i = 0; i < FSL_HW_NUM_LAWS; i++) { - printf("\tLAWBAR%d : 0x%08x, LAWAR%d : 0x%08x\n", - i, in_be32(lawbar), i, in_be32(lawar)); - lawbar += 8; - lawar += 8; + for (i = 0; i < FSL_HW_NUM_LAWS; i++) { + lawar = in_be32(LAWAR_ADDR(i)); +#ifdef CONFIG_FSL_CORENET + printf("LAWBARH%02d: 0x%08x LAWBARL%02d: 0x%08x", + i, in_be32(LAWBARH_ADDR(i)), + i, in_be32(LAWBARL_ADDR(i))); +#else + printf("LAWBAR%02d: 0x%08x", i, in_be32(LAWBAR_ADDR(i))); +#endif + printf(" LAWAR0x%02d: 0x%08x\n", i, lawar); + printf("\t(EN: %d TGT: 0x%02x SIZE: ", + (lawar & LAW_EN) ? 1 : 0, (lawar >> 20) & 0xff); + print_size(lawar_size(lawar), ")\n"); } return; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 146e9bf3cb6..acdb43112a6 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -75,7 +75,7 @@ struct fsl_elbc_ctrl { struct fsl_elbc_mtd *chips[MAX_BANKS]; /* device info */ - fsl_lbus_t *regs; + fsl_lbc_t *regs; u8 __iomem *addr; /* Address of assigned FCM buffer */ unsigned int page; /* Last page written to / read from */ unsigned int read_bytes; /* Number of bytes read during command */ @@ -171,7 +171,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; int buf_num; ctrl->page = page_addr; @@ -211,7 +211,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; long long end_tick; u32 ltesr; @@ -261,7 +261,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; if (priv->page_size) { out_be32(&lbc->fir, @@ -295,7 +295,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; ctrl->use_mdr = 0; @@ -633,7 +633,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; if (ctrl->status != LTESR_CC) return NAND_STATUS_FAIL; @@ -697,11 +697,7 @@ static void fsl_elbc_ctrl_init(void) if (!elbc_ctrl) return; -#ifdef CONFIG_MPC85xx - elbc_ctrl->regs = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR; -#else - elbc_ctrl->regs = &((immap_t *)CONFIG_SYS_IMMR)->lbus; -#endif + elbc_ctrl->regs = LBC_BASE_ADDR; /* clear event registers */ out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK); diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 9a40adc3550..524afa5c6e0 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -36,6 +36,7 @@ #define CONFIG_MPC8313ERDB 1 #define CONFIG_PCI +#define CONFIG_FSL_ELBC 1 #define CONFIG_MISC_INIT_R diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 6972fe8cd14..f1b110b9d67 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -197,6 +197,7 @@ #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR 0x00040000 +#define CONFIG_FSL_ELBC 1 /* * FLASH on the Local Bus diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index b30d0e385a4..9092755c6d7 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -223,6 +223,7 @@ #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 #define CONFIG_SYS_LBC_LBCR 0x00000000 +#define CONFIG_FSL_ELBC 1 /* * FLASH on the Local Bus diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1654f46a465..79dadc4a541 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -246,6 +246,7 @@ #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 #define CONFIG_SYS_LBC_LBCR 0x00000000 +#define CONFIG_FSL_ELBC 1 /* * FLASH on the Local Bus diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index da4313ac3a1..a014ad09416 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2009,2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -27,6 +27,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include "../board/freescale/common/ics307_clk.h" + #ifdef CONFIG_MK_36BIT #define CONFIG_PHYS_64BIT 1 #endif @@ -70,15 +72,9 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -extern unsigned long get_board_ddr_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ -#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq - from ICS307 instead of switches */ /* * These can be toggled for performance analysis, otherwise use default. @@ -669,6 +665,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 95ea2758398..7daf934d02b 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -294,6 +294,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index e945da2e6d2..ae4fba80141 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -403,6 +403,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 799d9461f8f..faba353119e 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -420,6 +420,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 3eb0049a04f..fdd3597f790 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -462,6 +462,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 07a8e6126ac..5011e5a8bf1 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -401,6 +401,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 4a4a9eda854..98677e5f1bd 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -416,6 +416,7 @@ #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 6973538a8c9..0cc2d474284 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -421,6 +421,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 0c43b2b0c7c..bb7bb47d65d 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -539,6 +539,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 78b73695bc3..57c2f2f2363 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2007-2008 Freescale Semiconductor, Inc. + * Copyright 2007-2008,2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -27,6 +27,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include "../board/freescale/common/ics307_clk.h" + #ifdef CONFIG_MK_36BIT #define CONFIG_PHYS_64BIT #endif @@ -53,15 +55,9 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -extern unsigned long get_board_ddr_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ -#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq - from ICS307 instead of switches */ /* * These can be toggled for performance analysis, otherwise use default. @@ -574,6 +570,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h new file mode 100644 index 00000000000..b42b5d09f14 --- /dev/null +++ b/include/configs/P1022DS.h @@ -0,0 +1,470 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * Timur Tabi <timur@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/freescale/common/ics307_clk.h" + +/* High Level Configuration Options */ +#define CONFIG_BOOKE /* BOOKE */ +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */ +#define CONFIG_P1022 +#define CONFIG_P1022DS +#define CONFIG_MP /* support multiple processors */ + +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ +#define CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_PHYS_64BIT +#define CONFIG_ENABLE_36BIT_PHYS +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() +#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE +#define CONFIG_BTB + +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x7fffffff + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ +#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR + +#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) /* pci0 */ +#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) /* pci1 */ +#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000) /* pci2 */ + +/* DDR Setup */ +#define CONFIG_DDR_SPD +#define CONFIG_VERY_BIG_RAM +#define CONFIG_FSL_DDR3 + +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) + +/* I2C addresses of SPD EEPROMs */ +#define CONFIG_SYS_SPD_BUS_NUM 1 +#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ + +/* + * Memory map + * + * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable + * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable + * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable + * + * Localbus cacheable (TBD) + * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable + * + * Localbus non-cacheable + * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable + * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable + * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 + * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 + * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + */ + +/* + * Local Bus Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ +#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull + +#define CONFIG_FLASH_BR_PRELIM \ + (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V) +#define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7) + +#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ + +#define CONFIG_SYS_BR1_PRELIM \ + (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM + +#define CONFIG_SYS_FLASH_BANKS_LIST \ + {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_MAX_FLASH_SECT 1024 + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +#define CONFIG_FSL_NGPIXIS +#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ +#define PIXIS_BASE_PHYS 0xfffdf0000ull + +#define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7) + +#define PIXIS_LBMAP_SWITCH 7 +#define PIXIS_LBMAP_MASK 0xE0 +#define PIXIS_LBMAP_ALTBANK 0x20 + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) + +/* Video */ +/* #define CONFIG_VIDEO */ +#ifdef CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#endif + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 + +/* + * I2C2 EEPROM + */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_BUS_NUM 1 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, Slot 2, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, direct to uli, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 3, Base address b000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#endif + +/* SATA */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#define CONFIG_MMC +#ifdef CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_GENERIC_MMC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#endif + +#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_TSEC_ENET +#ifdef CONFIG_TSEC_ENET + +#define CONFIG_TSECV2 +#define CONFIG_NET_MULTI + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" + +#define TSEC1_PHY_ADDR 1 +#define TSEC2_PHY_ADDR 2 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 + +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * USB + */ +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_EHCI_FSL +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_FAT +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_HZ 1000 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_HOSTNAME p1022ds +#define CONFIG_ROOTPATH /opt/nfsroot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#define CONFIG_BOOTARGS + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "perf_mode=stable\0" \ + "memctl_intlv_ctl=2\0" \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=uramdisk\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=p1022ds.dtb\0" \ + "bdev=sda3\0" \ + "diuregs=md e002c000 1d\0" \ + "dium=mw e002c01c\0" \ + "diuerr=md e002c014 1\0" \ + "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 tty0\0" \ + "monitor=0-DVI\0" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index b8917307897..3cebbab53c5 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -74,6 +74,7 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_E1000 1 /* E1000 pci Ethernet card*/ #ifndef __ASSEMBLY__ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif @@ -84,6 +85,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MP #endif +#define CONFIG_HWCONFIG + /* * These can be toggled for performance analysis, otherwise use default. */ @@ -475,6 +478,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_NET diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 66be725c8a0..569da4f6451 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -27,6 +27,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include "../board/freescale/common/ics307_clk.h" + #ifdef CONFIG_MK_36BIT #define CONFIG_PHYS_64BIT #endif @@ -54,17 +56,9 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -#ifndef __ASSEMBLY__ -extern unsigned long calculate_board_sys_clk(unsigned long dummy); -extern unsigned long calculate_board_ddr_clk(unsigned long dummy); -/* extern unsigned long get_board_sys_clk(unsigned long dummy); */ -/* extern unsigned long get_board_ddr_clk(unsigned long dummy); */ -#endif -#define CONFIG_SYS_CLK_FREQ calculate_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ calculate_board_ddr_clk(0) /* ddrclk for MPC85xx */ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ -#define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq - from ICS307 instead of switches */ /* * These can be toggled for performance analysis, otherwise use default. @@ -553,6 +547,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 4b9bcca79bc..7426bcadfdd 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -326,6 +326,7 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_EEPROM +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 1db20bcceb5..0bd28fc8ce1 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -325,6 +325,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_DATE #define CONFIG_CMD_EEPROM +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 1989e5aea6b..5d424dd75f4 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -380,6 +380,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index eb8657b6be0..70b7489ab1c 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -37,6 +37,7 @@ #define CONFIG_MPC8313 1 #define CONFIG_PCI +#define CONFIG_FSL_ELBC 1 #define CONFIG_MISC_INIT_R diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d44fb07cc06..90abe14f249 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -593,6 +593,7 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_DTT #define CONFIG_CMD_MII +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 1a56c6076b7..df5ef784892 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -338,6 +338,7 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP +#define CONFIG_CMD_REGINFO /* * Miscellaneous configurable options diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 7fd3668b208..1d6091caf67 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -47,6 +47,7 @@ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_FSL_ELBC 1 /* * Multicore config @@ -396,6 +397,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SNTP +#define CONFIG_CMD_REGINFO /* * Miscellaneous configurable options diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index aeac2dea3e4..3f4056e82b4 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -487,6 +487,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_ELF +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index dab4f801d83..53d06ed6988 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -382,6 +382,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 89f7cc4a198..ad7010900d1 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -355,6 +355,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 86b231ca8ee..891d2bfb3b1 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -321,6 +321,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_SYS_RAMBOOT) #undef CONFIG_CMD_SAVEENV diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 2783f9e04ea..363f7b473ad 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -353,6 +353,7 @@ #define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/fdt_support.h b/include/fdt_support.h index 9a453af34b5..fc16159eb2f 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -59,7 +59,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd); static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} #endif /* CONFIG_HAS_FSL_DR_USB */ -#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx) +#if defined(CONFIG_SYS_FSL_SEC_COMPAT) void fdt_fixup_crypto_node(void *blob, int sec_rev); #else static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} diff --git a/include/mpc85xx.h b/include/mpc85xx.h index a4d4d655266..2495b99c310 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -6,8 +6,6 @@ #ifndef __MPC85xx_H__ #define __MPC85xx_H__ -#include <asm/fsl_lbc.h> - /* define for common ppc_asm.tmpl */ #define EXC_OFF_SYS_RESET 0x100 /* System reset */ #define _START_OFFSET 0 diff --git a/nand_spl/board/freescale/mpc8536ds/nand_boot.c b/nand_spl/board/freescale/mpc8536ds/nand_boot.c index af29dc278fb..5a0a0c7996c 100644 --- a/nand_spl/board/freescale/mpc8536ds/nand_boot.c +++ b/nand_spl/board/freescale/mpc8536ds/nand_boot.c @@ -34,12 +34,11 @@ void board_init_f(ulong bootflag) int px_spd; u32 plat_ratio, bus_clk, sys_clk; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - ccsr_lbc_t *lbc = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR; #if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) /* for FPGA */ - out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); - out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); #else #error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined #endif diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c index ff47d55311e..9547d442388 100644 --- a/nand_spl/nand_boot_fsl_elbc.c +++ b/nand_spl/nand_boot_fsl_elbc.c @@ -32,7 +32,7 @@ static void nand_wait(void) { - fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000); + fsl_lbc_t *regs = LBC_BASE_ADDR; for (;;) { uint32_t status = in_be32(®s->ltesr); @@ -49,7 +49,7 @@ static void nand_wait(void) static void nand_load(unsigned int offs, int uboot_size, uchar *dst) { - fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000); + fsl_lbc_t *regs = LBC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; int large = in_be32(®s->bank[0].or) & OR_FCM_PGS; int block_shift = large ? 17 : 14; |