diff options
| -rw-r--r-- | board/raspberrypi/rpi/rpi.c | 40 | ||||
| -rw-r--r-- | include/configs/rpi.h | 1 |
2 files changed, 26 insertions, 15 deletions
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index ffd6d315ed9..e82022ef12f 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -472,15 +472,6 @@ static void get_board_rev(void) printf("RPI %s (0x%x)\n", model->name, revision); } -int board_init(void) -{ - get_board_rev(); - - gd->bd->bi_boot_params = 0x100; - - return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD); -} - #ifndef CONFIG_PL01X_SERIAL static bool rpi_is_serial_active(void) { @@ -500,17 +491,38 @@ static bool rpi_is_serial_active(void) return true; } + +/* Disable mini-UART I/O if it's not pinmuxed to our pins. + * The firmware only enables it if explicitly done in config.txt: enable_uart=1 + */ +static void rpi_disable_inactive_uart(void) +{ + struct udevice *dev; + struct bcm283x_mu_serial_platdata *plat; + + if (uclass_get_device_by_driver(UCLASS_SERIAL, + DM_GET_DRIVER(serial_bcm283x_mu), + &dev) || !dev) + return; + + if (!rpi_is_serial_active()) { + plat = dev_get_platdata(dev); + plat->disabled = true; + } +} #endif -int board_early_init_f(void) +int board_init(void) { #ifndef CONFIG_PL01X_SERIAL - /* Disable mini-UART I/O if it's not pinmuxed to our pins */ - if (!rpi_is_serial_active()) - serial_platdata.disabled = true; + rpi_disable_inactive_uart(); #endif - return 0; + get_board_rev(); + + gd->bd->bi_boot_params = 0x100; + + return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD); } int board_mmc_init(bd_t *bis) diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 45c82349057..fa959ef7e34 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -16,7 +16,6 @@ /* Architecture, CPU, etc.*/ #define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_EARLY_INIT_F /* Use SoC timer for AArch32, but architected timer for AArch64 */ #ifndef CONFIG_ARM64 |