diff options
| -rw-r--r-- | drivers/mtd/spi/spi_flash.c | 126 |
1 files changed, 82 insertions, 44 deletions
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index ea875dc812b..b4ba1dda51d 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -2,6 +2,8 @@ * SPI flash interface * * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik + * * Licensed under the GPL-2 or later. */ @@ -96,13 +98,68 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, return ret; } +/* + * The following table holds all device probe functions + * + * shift: number of continuation bytes before the ID + * idcode: the expected IDCODE or 0xff for non JEDEC devices + * probe: the function to call + * + * Non JEDEC devices should be ordered in the table such that + * the probe functions with best detection algorithms come first. + * + * Several matching entries are permitted, they will be tried + * in sequence until a probe function returns non NULL. + * + * IDCODE_CONT_LEN may be redefined if a device needs to declare a + * larger "shift" value. IDCODE_PART_LEN generally shouldn't be + * changed. This is the max number of bytes probe functions may + * examine when looking up part-specific identification info. + * + * Probe functions will be given the idcode buffer starting at their + * manu id byte (the "idcode" in the table below). In other words, + * all of the continuation bytes will be skipped (the "shift" below). + */ +#define IDCODE_CONT_LEN 0 +#define IDCODE_PART_LEN 5 +static const struct { + const u8 shift; + const u8 idcode; + struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode); +} flashes[] = { + /* Keep it sorted by define name */ +#ifdef CONFIG_SPI_FLASH_ATMEL + { 0, 0x1f, spi_flash_probe_atmel, }, +#endif +#ifdef CONFIG_SPI_FLASH_MACRONIX + { 0, 0xc2, spi_flash_probe_macronix, }, +#endif +#ifdef CONFIG_SPI_FLASH_SPANSION + { 0, 0x01, spi_flash_probe_spansion, }, +#endif +#ifdef CONFIG_SPI_FLASH_SST + { 0, 0xbf, spi_flash_probe_sst, }, +#endif +#ifdef CONFIG_SPI_FLASH_STMICRO + { 0, 0x20, spi_flash_probe_stmicro, }, +#endif +#ifdef CONFIG_SPI_FLASH_WINBOND + { 0, 0xef, spi_flash_probe_winbond, }, +#endif + /* Keep it sorted by best detection */ +#ifdef CONFIG_SPI_FLASH_STMICRO + { 0, 0xff, spi_flash_probe_stmicro, }, +#endif +}; +#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN) + struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int spi_mode) { struct spi_slave *spi; - struct spi_flash *flash; - int ret; - u8 idcode[5]; + struct spi_flash *flash = NULL; + int ret, i, shift; + u8 idcode[IDCODE_LEN], *idp; spi = spi_setup_slave(bus, cs, max_hz, spi_mode); if (!spi) { @@ -117,53 +174,34 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, } /* Read the ID codes */ - ret = spi_flash_cmd(spi, CMD_READ_ID, &idcode, sizeof(idcode)); + ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); if (ret) goto err_read_id; - debug("SF: Got idcode %02x %02x %02x %02x %02x\n", idcode[0], - idcode[1], idcode[2], idcode[3], idcode[4]); - - switch (idcode[0]) { -#ifdef CONFIG_SPI_FLASH_SPANSION - case 0x01: - flash = spi_flash_probe_spansion(spi, idcode); - break; +#ifdef DEBUG + printf("SF: Got idcodes\n"); + print_buffer(0, idcode, 1, sizeof(idcode), 0); #endif -#ifdef CONFIG_SPI_FLASH_ATMEL - case 0x1F: - flash = spi_flash_probe_atmel(spi, idcode); - break; -#endif -#ifdef CONFIG_SPI_FLASH_MACRONIX - case 0xc2: - flash = spi_flash_probe_macronix(spi, idcode); - break; -#endif -#ifdef CONFIG_SPI_FLASH_WINBOND - case 0xef: - flash = spi_flash_probe_winbond(spi, idcode); - break; -#endif -#ifdef CONFIG_SPI_FLASH_STMICRO - case 0x20: - case 0xff: /* Let the stmicro func handle non-JEDEC ids */ - flash = spi_flash_probe_stmicro(spi, idcode); - break; -#endif -#ifdef CONFIG_SPI_FLASH_SST - case 0xBF: - flash = spi_flash_probe_sst(spi, idcode); - break; -#endif - default: - printf("SF: Unsupported manufacturer %02X\n", idcode[0]); - flash = NULL; - break; - } - if (!flash) + /* count the number of continuation bytes */ + for (shift = 0, idp = idcode; + shift < IDCODE_CONT_LEN && *idp == 0x7f; + ++shift, ++idp) + continue; + + /* search the table for matches in shift and id */ + for (i = 0; i < ARRAY_SIZE(flashes); ++i) + if (flashes[i].shift == shift && flashes[i].idcode == *idp) { + /* we have a match, call probe */ + flash = flashes[i].probe(spi, idp); + if (flash) + break; + } + + if (!flash) { + printf("SF: Unsupported manufacturer %02x\n", *idp); goto err_manufacturer_probe; + } spi_release_bus(spi); |