diff options
| -rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/dts/rv1108-elgin-r1.dts | 48 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/rv1108/Kconfig | 6 | ||||
| -rw-r--r-- | board/elgin/elgin_rv1108/Kconfig | 15 | ||||
| -rw-r--r-- | board/elgin/elgin_rv1108/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/elgin/elgin_rv1108/Makefile | 7 | ||||
| -rw-r--r-- | board/elgin/elgin_rv1108/elgin_rv1108.c | 74 | ||||
| -rw-r--r-- | configs/elgin-rv1108_defconfig | 58 | ||||
| -rw-r--r-- | include/configs/elgin_rv1108.h | 13 |
9 files changed, 228 insertions, 0 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 949ee472fcc..dc6f6b233a6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -53,6 +53,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3399-puma-ddr1600.dtb \ rk3399-puma-ddr1866.dtb \ rk3399-rock960.dtb \ + rv1108-elgin-r1.dtb \ rv1108-evb.dtb dtb-$(CONFIG_ARCH_MESON) += \ meson-gxbb-nanopi-k2.dtb \ diff --git a/arch/arm/dts/rv1108-elgin-r1.dts b/arch/arm/dts/rv1108-elgin-r1.dts new file mode 100644 index 00000000000..32b95940b07 --- /dev/null +++ b/arch/arm/dts/rv1108-elgin-r1.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + */ + +/dts-v1/; + +#include "rv1108.dtsi" + +/ { + model = "Elgin RV1108 R1 board"; + compatible = "elgin,rv1108-elgin", "rockchip,rv1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&emmc { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; diff --git a/arch/arm/mach-rockchip/rv1108/Kconfig b/arch/arm/mach-rockchip/rv1108/Kconfig index e6cba66578d..8883aeae7a4 100644 --- a/arch/arm/mach-rockchip/rv1108/Kconfig +++ b/arch/arm/mach-rockchip/rv1108/Kconfig @@ -17,6 +17,11 @@ config TARGET_EVB_RV1108 * 10/100 Mbps Ethernet * camera interface compatible with imx323 / ov2710 / ov4689 +config TARGET_ELGIN_RV1108 + bool "ELGIN_RV1108" + help + RV1108 ELGIN is a board based on the Rockchip RV1108. + config SYS_SOC default "rockchip" @@ -24,5 +29,6 @@ config SYS_MALLOC_F_LEN default 0x400 source board/rockchip/evb_rv1108/Kconfig +source board/elgin/elgin_rv1108/Kconfig endif diff --git a/board/elgin/elgin_rv1108/Kconfig b/board/elgin/elgin_rv1108/Kconfig new file mode 100644 index 00000000000..be9243164aa --- /dev/null +++ b/board/elgin/elgin_rv1108/Kconfig @@ -0,0 +1,15 @@ +if TARGET_ELGIN_RV1108 + +config SYS_BOARD + default "elgin_rv1108" + +config SYS_VENDOR + default "elgin" + +config SYS_CONFIG_NAME + default "elgin_rv1108" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + +endif diff --git a/board/elgin/elgin_rv1108/MAINTAINERS b/board/elgin/elgin_rv1108/MAINTAINERS new file mode 100644 index 00000000000..7747490163a --- /dev/null +++ b/board/elgin/elgin_rv1108/MAINTAINERS @@ -0,0 +1,6 @@ +ELGIN-RV1108 +M: Otavio Salvador <otavio@ossystems.com.br> +S: Maintained +F: board/elgin/elgin_rv1108 +F: include/configs/elgin_rv1108.h +F: configs/elgin-rv1108_defconfig diff --git a/board/elgin/elgin_rv1108/Makefile b/board/elgin/elgin_rv1108/Makefile new file mode 100644 index 00000000000..382218006a6 --- /dev/null +++ b/board/elgin/elgin_rv1108/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2016 Rockchip Electronics Co., Ltd +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += elgin_rv1108.o diff --git a/board/elgin/elgin_rv1108/elgin_rv1108.c b/board/elgin/elgin_rv1108/elgin_rv1108.c new file mode 100644 index 00000000000..3abc5144129 --- /dev/null +++ b/board/elgin/elgin_rv1108/elgin_rv1108.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C)Copyright 2016 Rockchip Electronics Co., Ltd + * Authors: Andy Yan <andy.yan@rock-chips.com> + */ + +#include <common.h> +#include <asm/io.h> +#include <fdtdec.h> +#include <asm/arch/grf_rv1108.h> +#include <asm/arch/hardware.h> +#include <asm/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +int mach_cpu_init(void) +{ + int node; + struct rv1108_grf *grf; + enum { + GPIO3C3_SHIFT = 6, + GPIO3C3_MASK = 3 << GPIO3C3_SHIFT, + + GPIO3C2_SHIFT = 4, + GPIO3C2_MASK = 3 << GPIO3C2_SHIFT, + + GPIO2D2_SHIFT = 4, + GPIO2D2_MASK = 3 << GPIO2D2_SHIFT, + GPIO2D2_GPIO = 0, + GPIO2D2_UART2_SOUT_M0, + + GPIO2D1_SHIFT = 2, + GPIO2D1_MASK = 3 << GPIO2D1_SHIFT, + GPIO2D1_GPIO = 0, + GPIO2D1_UART2_SIN_M0, + }; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "rockchip,rv1108-grf"); + grf = (struct rv1108_grf *)fdtdec_get_addr(gd->fdt_blob, node, "reg"); + + /* Elgin board use UART2 m0 for debug*/ + rk_clrsetreg(&grf->gpio2d_iomux, + GPIO2D2_MASK | GPIO2D1_MASK, + GPIO2D2_UART2_SOUT_M0 << GPIO2D2_SHIFT | + GPIO2D1_UART2_SIN_M0 << GPIO2D1_SHIFT); + rk_clrreg(&grf->gpio3c_iomux, GPIO3C3_MASK | GPIO3C2_MASK); + + return 0; +} + +#define MODEM_ENABLE_GPIO 111 + +int board_init(void) +{ + gpio_request(MODEM_ENABLE_GPIO, "modem_enable"); + gpio_direction_output(MODEM_ENABLE_GPIO, 0); + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = 0x8000000; + + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = 0x60000000; + gd->bd->bi_dram[0].size = 0x8000000; + + return 0; +} diff --git a/configs/elgin-rv1108_defconfig b/configs/elgin-rv1108_defconfig new file mode 100644 index 00000000000..40fbd6bd0e8 --- /dev/null +++ b/configs/elgin-rv1108_defconfig @@ -0,0 +1,58 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x60000000 +CONFIG_ROCKCHIP_RV1108=y +CONFIG_TARGET_ELGIN_RV1108=y +CONFIG_DEBUG_UART_BASE=0x10210000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_DEFAULT_FDT_FILE="rv1108-elgin-r1.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_CMD_GPIO=y +CONFIG_RANDOM_UUID=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_DEFAULT_DEVICE_TREE="rv1108-elgin-r1" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0x62000000 +CONFIG_FASTBOOT_BUF_SIZE=0x08000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ROCKCHIP_RV1108=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_BAUDRATE=1500000 +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC2=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Rockchip" +CONFIG_USB_GADGET_VENDOR_NUM=0x2207 +CONFIG_USB_GADGET_PRODUCT_NUM=0x110a +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_ERRNO_STR=y diff --git a/include/configs/elgin_rv1108.h b/include/configs/elgin_rv1108.h new file mode 100644 index 00000000000..aa6c4b09e27 --- /dev/null +++ b/include/configs/elgin_rv1108.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/rv1108_common.h> + +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#endif |