diff options
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/gpio.h | 4 | ||||
| -rw-r--r-- | drivers/gpio/sunxi_gpio.c | 9 | ||||
| -rw-r--r-- | drivers/power/axp221.c | 75 | ||||
| -rw-r--r-- | include/axp221.h | 14 |
4 files changed, 63 insertions, 39 deletions
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index a66e45caffa..3a4b8c3165e 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -201,6 +201,10 @@ enum sunxi_gpio_number { #define SUNXI_GPIO_PULL_UP 1 #define SUNXI_GPIO_PULL_DOWN 2 +/* Virtual AXP0 GPIOs */ +#define SUNXI_GPIO_AXP0_VBUS_DETECT 8 +#define SUNXI_GPIO_AXP0_VBUS_ENABLE 9 + void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val); void sunxi_gpio_set_cfgpin(u32 pin, u32 val); int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset); diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 62960929ade..670af0c383c 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -21,6 +21,9 @@ #ifdef CONFIG_AXP209_POWER #include <axp209.h> #endif +#ifdef CONFIG_AXP221_POWER +#include <axp221.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -125,6 +128,12 @@ int sunxi_name_to_gpio(const char *name) #ifdef AXP_GPIO if (strncasecmp(name, "AXP0-", 5) == 0) { name += 5; + if (strcmp(name, "VBUS-DETECT") == 0) + return SUNXI_GPIO_AXP0_START + + SUNXI_GPIO_AXP0_VBUS_DETECT; + if (strcmp(name, "VBUS-ENABLE") == 0) + return SUNXI_GPIO_AXP0_START + + SUNXI_GPIO_AXP0_VBUS_ENABLE; pin = simple_strtol(name, &eptr, 10); if (!*name || *eptr) return -1; diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c index c2c3988804b..f758a75e9a6 100644 --- a/drivers/power/axp221.c +++ b/drivers/power/axp221.c @@ -14,6 +14,7 @@ #include <errno.h> #include <asm/arch/p2wi.h> #include <asm/arch/rsb.h> +#include <asm/arch/gpio.h> #include <axp221.h> /* @@ -385,54 +386,66 @@ int axp221_get_sid(unsigned int *sid) return 0; } -int axp_get_vbus(void) +int axp_gpio_direction_input(unsigned int pin) { - int ret; - u8 val; - - ret = axp221_init(); - if (ret) - return ret; - - ret = pmic_bus_read(AXP221_POWER_STATUS, &val); - if (ret) - return ret; - - return (val & AXP221_POWER_STATUS_VBUS_USABLE) ? 1 : 0; + switch (pin) { + case SUNXI_GPIO_AXP0_VBUS_DETECT: + return 0; + default: + return -EINVAL; + } } -static int axp_drivebus_setup(void) +int axp_gpio_direction_output(unsigned int pin, unsigned int val) { int ret; - ret = axp221_init(); - if (ret) - return ret; + switch (pin) { + case SUNXI_GPIO_AXP0_VBUS_ENABLE: + ret = axp221_clrbits(AXP221_MISC_CTRL, + AXP221_MISC_CTRL_N_VBUSEN_FUNC); + if (ret) + return ret; - /* Set N_VBUSEN pin to output / DRIVEBUS function */ - return axp221_clrbits(AXP221_MISC_CTRL, AXP221_MISC_CTRL_N_VBUSEN_FUNC); + return axp_gpio_set_value(pin, val); + default: + return -EINVAL; + } } -int axp_drivebus_enable(void) +int axp_gpio_get_value(unsigned int pin) { int ret; + u8 val; - ret = axp_drivebus_setup(); - if (ret) - return ret; + switch (pin) { + case SUNXI_GPIO_AXP0_VBUS_DETECT: + ret = pmic_bus_read(AXP221_POWER_STATUS, &val); + if (ret) + return ret; - /* Set DRIVEBUS high */ - return axp221_setbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS); + return !!(val & AXP221_POWER_STATUS_VBUS_USABLE); + default: + return -EINVAL; + } } -int axp_drivebus_disable(void) +int axp_gpio_set_value(unsigned int pin, unsigned int val) { int ret; - ret = axp_drivebus_setup(); - if (ret) - return ret; + switch (pin) { + case SUNXI_GPIO_AXP0_VBUS_ENABLE: + if (val) + ret = axp221_setbits(AXP221_VBUS_IPSOUT, + AXP221_VBUS_IPSOUT_DRIVEBUS); + else + ret = axp221_clrbits(AXP221_VBUS_IPSOUT, + AXP221_VBUS_IPSOUT_DRIVEBUS); - /* Set DRIVEBUS low */ - return axp221_clrbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS); + if (ret) + return ret; + } + + return 0; } diff --git a/include/axp221.h b/include/axp221.h index be6058e4395..0aac04dfebd 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -62,11 +62,7 @@ /* Page 1 addresses */ #define AXP221_SID 0x20 -/* We support vbus detection */ -#define AXP_VBUS_DETECT - -/* We support drivebus control */ -#define AXP_DRIVEBUS +#define AXP_GPIO int axp221_set_dcdc1(unsigned int mvolt); int axp221_set_dcdc2(unsigned int mvolt); @@ -83,6 +79,8 @@ int axp221_set_aldo3(unsigned int mvolt); int axp221_set_eldo(int eldo_num, unsigned int mvolt); int axp221_init(void); int axp221_get_sid(unsigned int *sid); -int axp_get_vbus(void); -int axp_drivebus_enable(void); -int axp_drivebus_disable(void); + +int axp_gpio_direction_input(unsigned int pin); +int axp_gpio_direction_output(unsigned int pin, unsigned int val); +int axp_gpio_get_value(unsigned int pin); +int axp_gpio_set_value(unsigned int pin, unsigned int val); |