diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 204 |
1 files changed, 102 insertions, 102 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f9d3f798270..b29e8f75d23 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -219,25 +219,25 @@ config CPU_ARM1176 config CPU_V7A bool - select HAS_VBAR select HAS_THUMB2 + select HAS_VBAR select SYS_CACHE_SHIFT_6 imply SYS_ARM_MMU config CPU_V7M bool select HAS_THUMB2 - select THUMB2_KERNEL - select SYS_CACHE_SHIFT_5 select SYS_ARM_MPU + select SYS_CACHE_SHIFT_5 select SYS_THUMB_BUILD + select THUMB2_KERNEL config CPU_V7R bool select HAS_THUMB2 - select SYS_CACHE_SHIFT_6 - select SYS_ARM_MPU select SYS_ARM_CACHE_CP15 + select SYS_ARM_MPU + select SYS_CACHE_SHIFT_6 config CPU_PXA bool @@ -427,19 +427,19 @@ config ARCH_DAVINCI config KIRKWOOD bool "Marvell Kirkwood" - select CPU_ARM926EJS - select BOARD_EARLY_INIT_F select ARCH_MISC_INIT + select BOARD_EARLY_INIT_F + select CPU_ARM926EJS config ARCH_MVEBU bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" - select OF_CONTROL - select OF_SEPARATE select DM select DM_ETH select DM_SERIAL select DM_SPI select DM_SPI_FLASH + select OF_CONTROL + select OF_SEPARATE select SPI config TARGET_DEVKIT3250 @@ -463,31 +463,31 @@ config ORION5X config TARGET_SPEAR300 bool "Support spear300" - select CPU_ARM926EJS select BOARD_EARLY_INIT_F - imply CMD_SAVES + select CPU_ARM926EJS select PL011_SERIAL + imply CMD_SAVES config TARGET_SPEAR310 bool "Support spear310" - select CPU_ARM926EJS select BOARD_EARLY_INIT_F - imply CMD_SAVES + select CPU_ARM926EJS select PL011_SERIAL + imply CMD_SAVES config TARGET_SPEAR320 bool "Support spear320" - select CPU_ARM926EJS select BOARD_EARLY_INIT_F - imply CMD_SAVES + select CPU_ARM926EJS select PL011_SERIAL + imply CMD_SAVES config TARGET_SPEAR600 bool "Support spear600" - select CPU_ARM926EJS select BOARD_EARLY_INIT_F - imply CMD_SAVES + select CPU_ARM926EJS select PL011_SERIAL + imply CMD_SAVES config TARGET_STV0991 bool "Support stv0991" @@ -496,16 +496,16 @@ config TARGET_STV0991 select DM_SERIAL select DM_SPI select DM_SPI_FLASH + select PL01X_SERIAL select SPI select SPI_FLASH - select PL01X_SERIAL config TARGET_X600 bool "Support x600" select BOARD_LATE_INIT select CPU_ARM926EJS - select SUPPORT_SPL select PL011_SERIAL + select SUPPORT_SPL config TARGET_WOODBURN bool "Support woodburn" @@ -528,8 +528,8 @@ config TARGET_MX35PDK config ARCH_BCM283X bool "Broadcom BCM283X family" select DM - select DM_SERIAL select DM_GPIO + select DM_SERIAL select OF_CONTROL select PL01X_SERIAL select SERIAL_SEARCH_ALL @@ -577,13 +577,13 @@ config TARGET_BCM28155_AP config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7A - imply CRC32_VERIFY + imply BCM_SF2_ETH + imply BCM_SF2_ETH_GMAC imply CMD_HASH + imply CRC32_VERIFY imply FAT_WRITE imply HASH_VERIFY imply NETDEVICES - imply BCM_SF2_ETH - imply BCM_SF2_ETH_GMAC config TARGET_BCMNSP bool "Support bcmnsp" @@ -600,12 +600,12 @@ config TARGET_BCMNS2 config ARCH_EXYNOS bool "Samsung EXYNOS" select DM + select DM_GPIO select DM_I2C - select DM_SPI_FLASH + select DM_KEYBOARD select DM_SERIAL select DM_SPI - select DM_GPIO - select DM_KEYBOARD + select DM_SPI_FLASH select SPI imply FAT_WRITE @@ -613,9 +613,9 @@ config ARCH_S5PC1XX bool "Samsung S5PC1XX" select CPU_V7A select DM - select DM_SERIAL select DM_GPIO select DM_I2C + select DM_SERIAL config ARCH_HIGHBANK bool "Calxeda Highbank" @@ -630,14 +630,14 @@ config ARCH_INTEGRATOR config ARCH_KEYSTONE bool "TI Keystone" + select CMD_POWEROFF select CPU_V7A select SUPPORT_SPL - select SYS_THUMB_BUILD - select CMD_POWEROFF select SYS_ARCH_TIMER + select SYS_THUMB_BUILD imply CMD_MTDPARTS - imply FIT imply CMD_SAVES + imply FIT config ARCH_OMAP2PLUS bool "TI OMAP2+" @@ -690,12 +690,12 @@ config ARCH_MX7ULP config ARCH_MX7 bool "Freescale MX7" + select ARCH_MISC_INIT + select BOARD_EARLY_INIT_F select CPU_V7A select SYS_FSL_HAS_SEC if SECURE_BOOT select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE - select BOARD_EARLY_INIT_F - select ARCH_MISC_INIT imply MXC_GPIO config ARCH_MX6 @@ -714,8 +714,8 @@ endif config ARCH_MX5 bool "Freescale MX5" - select CPU_V7A select BOARD_EARLY_INIT_F + select CPU_V7A imply MXC_GPIO config ARCH_OWL @@ -734,9 +734,9 @@ config ARCH_QEMU config ARCH_RMOBILE bool "Renesas ARM SoCs" + select BOARD_EARLY_INIT_F select DM select DM_SERIAL - select BOARD_EARLY_INIT_F imply FAT_WRITE imply SYS_THUMB_BUILD @@ -751,30 +751,32 @@ config ARCH_SNAPDRAGON select DM select DM_GPIO select DM_SERIAL - select SPMI + select MSM_SMEM select OF_CONTROL select OF_SEPARATE select SMEM - select MSM_SMEM + select SPMI config ARCH_SOCFPGA bool "Altera SOCFPGA family" select ARCH_EARLY_INIT_R select ARCH_MISC_INIT + select ARM64 if TARGET_SOCFPGA_STRATIX10 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select DM select DM_SERIAL select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select OF_CONTROL select SPL_DM_RESET if DM_RESET + select SPL_DM_SERIAL select SPL_LIBCOMMON_SUPPORT select SPL_LIBDISK_SUPPORT select SPL_LIBGENERIC_SUPPORT select SPL_MMC_SUPPORT if DM_MMC select SPL_NAND_SUPPORT if SPL_NAND_DENALI select SPL_OF_CONTROL + select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 select SPL_SERIAL_SUPPORT - select SPL_DM_SERIAL select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT select SPL_SPI_SUPPORT if DM_SPI select SPL_WATCHDOG_SUPPORT @@ -782,14 +784,12 @@ config ARCH_SOCFPGA select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE select SYS_NS16550 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 - select ARM64 if TARGET_SOCFPGA_STRATIX10 imply CMD_MTDPARTS imply CRC32_VERIFY imply DM_SPI imply DM_SPI_FLASH imply FAT_WRITE imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION - select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" @@ -809,12 +809,12 @@ config ARCH_SUNXI select SPECIFY_CONSOLE_INDEX select SPL_STACK_R if SPL select SPL_SYS_MALLOC_SIMPLE if SPL - select SYS_NS16550 select SPL_SYS_THUMB_BUILD if !ARM64 + select SYS_NS16550 select SYS_THUMB_BUILD if !ARM64 select USB if DISTRO_DEFAULTS - select USB_STORAGE if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS + select USB_STORAGE if DISTRO_DEFAULTS select USE_TINY_PRINTF imply CMD_GPT imply DISTRO_DEFAULTS @@ -839,51 +839,51 @@ config ARCH_VF610 config ARCH_ZYNQ bool "Xilinx Zynq based platform" + select BOARD_EARLY_INIT_F if WDT select BOARD_LATE_INIT + select CLK + select CLK_ZYNQ select CPU_V7A - select SUPPORT_SPL - select OF_CONTROL - select SPL_BOARD_INIT if SPL - select BOARD_EARLY_INIT_F if WDT - select SPL_OF_CONTROL if SPL select DM select DM_ETH if NET - select SPL_DM if SPL select DM_MMC if MMC - select DM_SPI select DM_SERIAL + select DM_SPI select DM_SPI_FLASH - select SPL_SEPARATE_BSS if SPL select DM_USB if USB - select CLK - select SPL_CLK if SPL - select CLK_ZYNQ + select OF_CONTROL select SPI + select SPL_BOARD_INIT if SPL + select SPL_CLK if SPL + select SPL_DM if SPL + select SPL_OF_CONTROL if SPL + select SPL_SEPARATE_BSS if SPL + select SUPPORT_SPL + imply ARCH_EARLY_INIT_R imply CMD_CLK - imply FAT_WRITE imply CMD_SPL - imply ARCH_EARLY_INIT_R + imply FAT_WRITE config ARCH_ZYNQMP_R5 bool "Xilinx ZynqMP R5 based platform" + select CLK select CPU_V7R - select OF_CONTROL select DM select DM_SERIAL - select CLK + select OF_CONTROL config ARCH_ZYNQMP bool "Xilinx ZynqMP based platform" select ARM64 select BOARD_LATE_INIT + select CLK select DM - select OF_CONTROL select DM_SERIAL - select SUPPORT_SPL - select CLK + select DM_USB if USB + select OF_CONTROL select SPL_BOARD_INIT if SPL select SPL_CLK if SPL - select DM_USB if USB + select SUPPORT_SPL imply FAT_WRITE config TEGRA @@ -899,8 +899,8 @@ config TARGET_VEXPRESS64_AEMV8A config TARGET_VEXPRESS64_BASE_FVP bool "Support Versatile Express ARMv8a FVP BASE model" select ARM64 - select SEMIHOSTING select PL01X_SERIAL + select SEMIHOSTING config TARGET_VEXPRESS64_BASE_FVP_DRAM bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" @@ -920,9 +920,9 @@ config TARGET_VEXPRESS64_JUNO config TARGET_LS2080A_EMU bool "Support ls2080a_emu" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY - select ARCH_MISC_INIT help Support for Freescale LS2080A_EMU platform The LS2080A Development System (EMULATOR) is a pre silicon @@ -932,9 +932,9 @@ config TARGET_LS2080A_EMU config TARGET_LS2080A_SIMU bool "Support ls2080a_simu" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY - select ARCH_MISC_INIT help Support for Freescale LS2080A_SIMU platform The LS2080A Development System (QDS) is a pre silicon @@ -944,9 +944,9 @@ config TARGET_LS2080A_SIMU config TARGET_LS1088AQDS bool "Support ls1088aqds" select ARCH_LS1088A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY - select ARCH_MISC_INIT select BOARD_LATE_INIT select SUPPORT_SPL help @@ -958,11 +958,11 @@ config TARGET_LS1088AQDS config TARGET_LS2080AQDS bool "Support ls2080aqds" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL - select ARCH_MISC_INIT imply SCSI imply SCSI_AHCI help @@ -974,11 +974,11 @@ config TARGET_LS2080AQDS config TARGET_LS2080ARDB bool "Support ls2080ardb" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL - select ARCH_MISC_INIT imply SCSI imply SCSI_AHCI help @@ -990,11 +990,11 @@ config TARGET_LS2080ARDB config TARGET_LS2081ARDB bool "Support ls2081ardb" select ARCH_LS2080A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL - select ARCH_MISC_INIT help Support for Freescale LS2081ARDB platform. The LS2081A Reference design board (RDB) is a high-performance @@ -1018,9 +1018,9 @@ config TARGET_POPLAR bool "Support Poplar 96boards Enterprise Edition Platform" select ARM64 select DM - select OF_CONTROL select DM_SERIAL select DM_USB + select OF_CONTROL select PL01X_SERIAL help Support for Poplar 96boards EE platform. It features a HI3798cv200 @@ -1067,8 +1067,8 @@ config TARGET_LS1012A2G5RDB config TARGET_LS1012AFRWY bool "Support ls1012afrwy" select ARCH_LS1012A - select BOARD_LATE_INIT select ARM64 + select BOARD_LATE_INIT imply SCSI imply SCSI_AHCI help @@ -1090,9 +1090,9 @@ config TARGET_LS1012AFRDM config TARGET_LS1088ARDB bool "Support ls1088ardb" select ARCH_LS1088A + select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY - select ARCH_MISC_INIT select BOARD_LATE_INIT select SUPPORT_SPL help @@ -1103,40 +1103,40 @@ config TARGET_LS1088ARDB config TARGET_LS1021AQDS bool "Support ls1021aqds" + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT - select SUPPORT_SPL - select ARCH_LS1021A - select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP + select SUPPORT_SPL select SYS_FSL_DDR - select BOARD_EARLY_INIT_F imply SCSI config TARGET_LS1021ATWR bool "Support ls1021atwr" + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT - select SUPPORT_SPL - select ARCH_LS1021A - select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP - select BOARD_EARLY_INIT_F + select SUPPORT_SPL imply SCSI config TARGET_LS1021AIOT bool "Support ls1021aiot" + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI select BOARD_LATE_INIT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL - select ARCH_LS1021A - select ARCH_SUPPORT_PSCI imply SCSI help Support for Freescale LS1021AIOT platform. @@ -1149,9 +1149,9 @@ config TARGET_LS1043AQDS select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select SUPPORT_SPL - select BOARD_EARLY_INIT_F imply SCSI help Support for Freescale LS1043AQDS platform. @@ -1161,9 +1161,9 @@ config TARGET_LS1043ARDB select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select SUPPORT_SPL - select BOARD_EARLY_INIT_F imply SCSI help Support for Freescale LS1043ARDB platform. @@ -1173,10 +1173,10 @@ config TARGET_LS1046AQDS select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT - select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI - select BOARD_EARLY_INIT_F + select SUPPORT_SPL imply SCSI help Support for Freescale LS1046AQDS platform. @@ -1189,11 +1189,11 @@ config TARGET_LS1046ARDB select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT - select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI select POWER_MC34VR500 - select BOARD_EARLY_INIT_F + select SUPPORT_SPL imply SCSI help Support for Freescale LS1046ARDB platform. @@ -1249,12 +1249,12 @@ config STM32 config ARCH_STI bool "Support STMicrolectronics SoCs" + select BLK select CPU_V7A select DM - select DM_SERIAL - select BLK select DM_MMC select DM_RESET + select DM_SERIAL help Support for STMicroelectronics STiH407/10 SoC family. This SoC is used on Linaro 96Board STiH410-B2260 @@ -1268,9 +1268,9 @@ config ARCH_STM32MP select DM_GPIO select DM_RESET select DM_SERIAL + select MISC select OF_CONTROL select OF_LIBFDT - select MISC select PINCTRL select REGMAP select SUPPORT_SPL @@ -1285,44 +1285,44 @@ config ARCH_STM32MP config ARCH_ROCKCHIP bool "Support Rockchip SoCs" - select OF_CONTROL select BLK select DM - select SPL_DM if SPL - select SYS_MALLOC_F - select SYS_THUMB_BUILD if !ARM64 - select SPL_SYS_MALLOC_SIMPLE if SPL select DM_GPIO select DM_I2C select DM_MMC + select DM_PWM + select DM_REGULATOR select DM_SERIAL select DM_SPI select DM_SPI_FLASH select DM_USB if USB - select DM_PWM - select DM_REGULATOR select ENABLE_ARM_SOC_BOOT0_HOOK + select OF_CONTROL select SPI + select SPL_DM if SPL + select SPL_SYS_MALLOC_SIMPLE if SPL + select SYS_MALLOC_F + select SYS_THUMB_BUILD if !ARM64 + imply ADC imply DISTRO_DEFAULTS imply FAT_WRITE - imply USB_FUNCTION_FASTBOOT - imply SPL_SYSRESET - imply TPL_SYSRESET - imply ADC imply SARADC_ROCKCHIP + imply SPL_SYSRESET imply SYS_NS16550 + imply TPL_SYSRESET + imply USB_FUNCTION_FASTBOOT config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" select ARM64 select OF_CONTROL - select SYS_CACHE_SHIFT_7 select PL01X_SERIAL + select SYS_CACHE_SHIFT_7 config ARCH_ASPEED bool "Support Aspeed SoCs" - select OF_CONTROL select DM + select OF_CONTROL endchoice |