diff options
Diffstat (limited to 'arch/arm/cpu')
| -rw-r--r-- | arch/arm/cpu/armv7/nonsec_virt.S | 35 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/virt-v7.c | 16 |
2 files changed, 50 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index 3dd60b7137a..cbee8f70a28 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -58,6 +58,28 @@ _secure_monitor: movs pc, lr @ return to non-secure SVC /* + * Secondary CPUs start here and call the code for the core specific parts + * of the non-secure and HYP mode transition. The GIC distributor specific + * code has already been executed by a C function before. + * Then they go back to wfi and wait to be woken up by the kernel again. + */ +ENTRY(_smp_pen) + mrs r0, cpsr + orr r0, r0, #0xc0 + msr cpsr, r0 @ disable interrupts + ldr r1, =_start + mcr p15, 0, r1, c12, c0, 0 @ set VBAR + + bl _nonsec_init + + ldr r1, [r0, #GICC_IAR] @ acknowledge IPI + str r1, [r0, #GICC_EOIR] @ signal end of interrupt + + adr r0, _smp_pen @ do not use this address again + b smp_waitloop @ wait for IPIs, board specific +ENDPROC(_smp_pen) + +/* * Switch a core to non-secure state. * * 1. initialize the GIC per-core interface @@ -138,3 +160,16 @@ ENTRY(_nonsec_init) bx lr ENDPROC(_nonsec_init) + +#ifdef CONFIG_SMP_PEN_ADDR +/* void __weak smp_waitloop(unsigned previous_address); */ +ENTRY(smp_waitloop) + wfi + ldr r1, =CONFIG_SMP_PEN_ADDR @ load start address + ldr r1, [r1] + cmp r0, r1 @ make sure we dont execute this code + beq smp_waitloop @ again (due to a spurious wakeup) + mov pc, r1 +ENDPROC(smp_waitloop) +.weak smp_waitloop +#endif diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c index 068ac85225f..a0b87424644 100644 --- a/arch/arm/cpu/armv7/virt-v7.c +++ b/arch/arm/cpu/armv7/virt-v7.c @@ -79,6 +79,17 @@ static unsigned long get_gicd_base_address(void) #endif } +static void kick_secondary_cpus_gic(unsigned long gicdaddr) +{ + /* kick all CPUs (except this one) by writing to GICD_SGIR */ + writel(1U << 24, gicdaddr + GICD_SGIR); +} + +void __weak smp_kick_all_cpus(void) +{ + kick_secondary_cpus_gic(gic_dist_addr); +} + int armv7_switch_nonsec(void) { unsigned int reg; @@ -115,7 +126,10 @@ int armv7_switch_nonsec(void) for (i = 1; i <= itlinesnr; i++) writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i); - /* call the non-sec switching code on this CPU */ + smp_set_core_boot_addr((unsigned long)_smp_pen, -1); + smp_kick_all_cpus(); + + /* call the non-sec switching code on this CPU also */ _nonsec_init(); return 0; |