1 files changed, 4 insertions, 74 deletions
diff --git a/arch/arm/dts/imx6q-bx50v3.dts b/arch/arm/dts/imx6q-bx50v3.dts
index deaec635093..a44d7004cbe 100644
--- a/arch/arm/dts/imx6q-bx50v3.dts
+++ b/arch/arm/dts/imx6q-bx50v3.dts
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
+// SPDX-License-Identifier: GPL-2.0+ OR X11
 /*
  * Copyright 2015 Timesys Corporation.
  * Copyright 2018 General Electric Company
@@ -7,83 +7,13 @@
 
 /dts-v1/;
 
-#include "imx6q.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "imx6q-bx50v3.dtsi"
 
 / {
 	model = "General Electric Bx50v3";
 	compatible = "ge,imx6q-bx50v3", "advantech,imx6q-ba16", "fsl,imx6q";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
-			/* SPI1 CS */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_reset: usdhc3grp-reset {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
-		>;
-	};
-};
-
-&usdhc1 {
-	status = "disabled";
-};
-
-&usdhc2 {
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
-	bus-width = <8>;
-	non-removable;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc4 {
-	status = "disabled";
-};
-
-/* SPI NOR */
-&ecspi1 {
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
 
-	flash: n25q032@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
-		reg = <0>;
+	chosen {
+		stdout-path = &uart3;
 	};
 };