1 files changed, 0 insertions, 94 deletions
diff --git a/arch/arm/dts/imx7-colibri-emmc.dts b/arch/arm/dts/imx7-colibri-emmc.dts
deleted file mode 100644
index 8545498275e..00000000000
--- a/arch/arm/dts/imx7-colibri-emmc.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * Copyright 2019 Toradex AG
- */
-
-/dts-v1/;
-#include "imx7-colibri.dtsi"
-#include "imx7-colibri-u-boot.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D 1GB (eMMC)";
-	compatible = "toradex,imx7d-colibri-emmc", "fsl,imx7d";
-
-	aliases {
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc1;
-		display1 = &lcdif;
-		usb0 = &usbotg1; /* required for ums */
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
-		>;
-	};
-
-	pinctrl_usbh_reg: gpio-usbh-vbus {
-		fsl,pins = <
-			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14
-		>;
-	};
-};
-
-/* Colibri USBC */
-&usbotg1 {
-	/*
-	 * usbotg1 on Colibri iMX7 can function in both host/otg modes.
-	 * Gadget stack currently does not look at this at all while
-	 * the host stack refuses to bind/load if it is not set to host
-	 * (it obviously won't be enumerated during usb start invocation
-	 * if dr_mode = "otg")
-	 */
-	dr_mode = "host";
-	status = "okay";
-};
-
-/* Colibri USBH */
-&usbotg2 {
-	dr_mode = "host";
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};