diff options
Diffstat (limited to 'arch/arm/dts/rk3328.dtsi')
-rw-r--r-- | arch/arm/dts/rk3328.dtsi | 41 |
1 files changed, 16 insertions, 25 deletions
diff --git a/arch/arm/dts/rk3328.dtsi b/arch/arm/dts/rk3328.dtsi index fe81b97bbe7..fb5dcf6e932 100644 --- a/arch/arm/dts/rk3328.dtsi +++ b/arch/arm/dts/rk3328.dtsi @@ -965,6 +965,22 @@ }; }; + usb20_otg: usb@ff580000 { + compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x0 0xff580000 0x0 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + phys = <&u2phy_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + usb_host0_ehci: usb@ff5c0000 { compatible = "generic-ehci"; reg = <0x0 0xff5c0000 0x0 0x10000>; @@ -1004,31 +1020,6 @@ status = "disabled"; }; - /* - * U-Boot Specific Change - * - * The OTG controller must come after the USB host pair for it - * to work. This is likely due to lack of support for the USB - * PHYs. This must be manually changed after each device tree - * sync. There is no clean way to handle this in -u-boot.dtsi - * files. - */ - usb20_otg: usb@ff580000 { - compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb", - "snps,dwc2"; - reg = <0x0 0xff580000 0x0 0x40000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_OTG>; - clock-names = "otg"; - dr_mode = "otg"; - g-np-tx-fifo-size = <16>; - g-rx-fifo-size = <280>; - g-tx-fifo-size = <256 128 128 64 32 16>; - phys = <&u2phy_otg>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - gic: interrupt-controller@ff811000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; |