aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts')
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/rk3229-evb.dts11
-rw-r--r--arch/arm/dts/rk322x.dtsi66
-rw-r--r--arch/arm/dts/rk3368-geekbox-u-boot.dtsi34
-rw-r--r--arch/arm/dts/rk3368-lion-u-boot.dtsi93
-rw-r--r--arch/arm/dts/rk3368-lion.dts195
-rw-r--r--arch/arm/dts/rk3368-px5-evb-u-boot.dtsi34
-rw-r--r--arch/arm/dts/rk3368-sheep-u-boot.dtsi34
-rw-r--r--arch/arm/dts/rk3368.dtsi30
9 files changed, 488 insertions, 10 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c2dc240edf6..2cbdb17ca54 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3328-evb.dtb \
+ rk3368-lion.dtb \
rk3368-sheep.dtb \
rk3368-geekbox.dtb \
rk3368-px5-evb.dtb \
diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts
index 37137c2e520..64f1c2d7dac 100644
--- a/arch/arm/dts/rk3229-evb.dts
+++ b/arch/arm/dts/rk3229-evb.dts
@@ -72,6 +72,17 @@
status = "okay";
};
+&sdmmc {
+ status = "okay";
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp;
+ num-slots = <1>;
+ supports-sd;
+};
+
&uart2 {
status = "okay";
};
diff --git a/arch/arm/dts/rk322x.dtsi b/arch/arm/dts/rk322x.dtsi
index 4f2a1f6a157..22324f97b3d 100644
--- a/arch/arm/dts/rk322x.dtsi
+++ b/arch/arm/dts/rk322x.dtsi
@@ -21,6 +21,8 @@
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
};
cpus {
@@ -383,12 +385,38 @@
status = "disabled";
};
+ sdmmc: dwmmc@30000000 {
+ compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x30000000 0x4000>;
+ max-frequency = <150000000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@30010000 {
+ compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x30010000 0x4000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+ status = "disabled";
+ };
+
emmc: dwmmc@30020000 {
compatible = "rockchip,rk3288-dw-mshc";
reg = <0x30020000 0x4000>;
+ max-frequency = <150000000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <37500000>;
- max-frequency = <37500000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -520,6 +548,40 @@
drive-strength = <12>;
};
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <1 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <1 20 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <1 21 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+ };
+ };
+
+ sdio {
+ sdio_clk: sdio-clk {
+ rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+ };
+
+ sdio_cmd: sdio-cmd {
+ rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+ };
+
+ sdio_bus4: sdio-bus4 {
+ rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <3 3 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <3 4 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <3 5 RK_FUNC_1 &pcfg_pull_none_drv_12ma>;
+ };
+ };
+
emmc {
emmc_clk: emmc-clk {
rockchip,pins = <2 RK_PA7 RK_FUNC_2 &pcfg_pull_none>;
diff --git a/arch/arm/dts/rk3368-geekbox-u-boot.dtsi b/arch/arm/dts/rk3368-geekbox-u-boot.dtsi
new file mode 100644
index 00000000000..764b3e4cb4f
--- /dev/null
+++ b/arch/arm/dts/rk3368-geekbox-u-boot.dtsi
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&service_msch {
+ u-boot,dm-pre-reloc;
+};
+
+&dmc {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&pmugrf {
+ u-boot,dm-pre-reloc;
+};
+
+&cru {
+ u-boot,dm-pre-reloc;
+};
+
+&grf {
+ u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3368-lion-u-boot.dtsi b/arch/arm/dts/rk3368-lion-u-boot.dtsi
new file mode 100644
index 00000000000..6052e8a8d38
--- /dev/null
+++ b/arch/arm/dts/rk3368-lion-u-boot.dtsi
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+/ {
+ config {
+ u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+ u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ u-boot,spl-boot-order = &emmc, &sdmmc;
+ };
+
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&service_msch {
+ u-boot,dm-pre-reloc;
+};
+
+&dmc {
+ u-boot,dm-pre-reloc;
+
+ /*
+ * Validation of throughput using SPEC2000 shows the following
+ * relative performance for the different memory schedules:
+ * - CBDR: 30.1
+ * - CBRD: 29.8
+ * - CRBD: 29.9
+ * Note that the best performance for any given application workload
+ * may vary from the default configured here (e.g. 164.gzip is fastest
+ * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD).
+ *
+ * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for
+ * details on the 'rockchip,memory-schedule' property and how it
+ * affects the physical-address to device-address mapping.
+ */
+ rockchip,memory-schedule = <DMC_MSCH_CBDR>;
+ rockchip,ddr-frequency = <800000000>;
+ rockchip,ddr-speed-bin = <DDR3_1600K>;
+
+ status = "okay";
+};
+
+&pmugrf {
+ u-boot,dm-pre-reloc;
+};
+
+&sgrf {
+ u-boot,dm-pre-reloc;
+};
+
+&cru {
+ u-boot,dm-pre-reloc;
+};
+
+&grf {
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+};
+
+&emmc {
+ u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+};
+
+&spi1 {
+ u-boot,dm-pre-reloc;
+
+ spiflash: w25q32dw@0 {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&timer0 {
+ u-boot,dm-pre-reloc;
+ clock-frequency = <24000000>;
+};
+
+
diff --git a/arch/arm/dts/rk3368-lion.dts b/arch/arm/dts/rk3368-lion.dts
new file mode 100644
index 00000000000..850db500e4e
--- /dev/null
+++ b/arch/arm/dts/rk3368-lion.dts
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include "rk3368-lion-u-boot.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Theobroma Systems RK3368-uQ7 SoM";
+ compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368";
+
+ aliases {
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ ext_gmac: gmac-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ clock-frequency = <150000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ non-removable;
+ num-slots = <1>;
+ vmmc-supply = <&vcc33_io>;
+ vqmmc-supply = <&vcc18_io>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&sdmmc {
+ status = "okay";
+};
+
+&gmac {
+ status = "okay";
+ phy-supply = <&vcc33_io>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <2 10000 50000>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ tx_delay = <0x10>;
+ rx_delay = <0x10>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_sys>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ #clock-cells = <1>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_cpu";
+ };
+
+ vdd_log: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd_log";
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ };
+
+ vcc33_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_io";
+ };
+
+ vcc33_video: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_video";
+ };
+
+ vdd10_pll: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_pll";
+ };
+
+ vcc18_io: LDO_REG4 {
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_io";
+ };
+
+ vdd10_video: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_video";
+ };
+
+ vcc18_video: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_video";
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spiflash: w25q32dw@0 {
+ compatible = "spi-flash";
+ reg = <0>;
+ spi-max-frequency = <49500000>;
+ spi-cpol;
+ spi-cpha;
+ };
+};
diff --git a/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi b/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi
new file mode 100644
index 00000000000..3a5e30ea551
--- /dev/null
+++ b/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&service_msch {
+ u-boot,dm-pre-reloc;
+};
+
+&dmc {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&pmugrf {
+ u-boot,dm-pre-reloc;
+};
+
+&cru {
+ u-boot,dm-pre-reloc;
+};
+
+&grf {
+ u-boot,dm-pre-reloc;
+};
+
+&uart4 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3368-sheep-u-boot.dtsi b/arch/arm/dts/rk3368-sheep-u-boot.dtsi
new file mode 100644
index 00000000000..764b3e4cb4f
--- /dev/null
+++ b/arch/arm/dts/rk3368-sheep-u-boot.dtsi
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&service_msch {
+ u-boot,dm-pre-reloc;
+};
+
+&dmc {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&pmugrf {
+ u-boot,dm-pre-reloc;
+};
+
+&cru {
+ u-boot,dm-pre-reloc;
+};
+
+&grf {
+ u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3368.dtsi b/arch/arm/dts/rk3368.dtsi
index 9daf7654306..b4f4f6139db 100644
--- a/arch/arm/dts/rk3368.dtsi
+++ b/arch/arm/dts/rk3368.dtsi
@@ -46,6 +46,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/memory/rk3368-dmc.h>
/ {
compatible = "rockchip,rk3368";
@@ -227,6 +228,21 @@
#clock-cells = <0>;
};
+ dmc: dmc@ff610000 {
+ compatible = "rockchip,rk3368-dmc", "syscon";
+ rockchip,cru = <&cru>;
+ rockchip,grf = <&grf>;
+ rockchip,msch = <&service_msch>;
+ reg = <0 0xff610000 0 0x400
+ 0 0xff620000 0 0x400>;
+ };
+
+ service_msch: syscon@ffac0000 {
+ compatible = "rockchip,rk3368-msch", "syscon";
+ reg = <0x0 0xffac0000 0x0 0x2000>;
+ status = "okay";
+ };
+
sdmmc: dwmmc@ff0c0000 {
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0c0000 0x0 0x4000>;
@@ -546,12 +562,6 @@
status = "disabled";
};
- dmc: dmc@ff610000 {
- u-boot,dm-pre-reloc;
- compatible = "rockchip,rk3368-dmc", "syscon";
- reg = <0x0 0xff610000 0x0 0x1000>;
- };
-
i2c0: i2c@ff650000 {
compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
reg = <0x0 0xff650000 0x0 0x1000>;
@@ -647,11 +657,15 @@
};
pmugrf: syscon@ff738000 {
- u-boot,dm-pre-reloc;
compatible = "rockchip,rk3368-pmugrf", "syscon";
reg = <0x0 0xff738000 0x0 0x1000>;
};
+ sgrf: syscon@ff740000 {
+ compatible = "rockchip,rk3368-sgrf", "syscon";
+ reg = <0x0 0xff740000 0x0 0x1000>;
+ };
+
cru: clock-controller@ff760000 {
compatible = "rockchip,rk3368-cru";
reg = <0x0 0xff760000 0x0 0x1000>;
@@ -673,7 +687,7 @@
status = "disabled";
};
- timer@ff810000 {
+ timer0: timer@ff810000 {
compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
reg = <0x0 0xff810000 0x0 0x20>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 07:00:47 +0000