diff options
Diffstat (limited to 'arch/arm/mach-sunxi')
| -rw-r--r-- | arch/arm/mach-sunxi/Kconfig | 12 | ||||
| -rw-r--r-- | arch/arm/mach-sunxi/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-sunxi/board.c | 22 | ||||
| -rw-r--r-- | arch/arm/mach-sunxi/clock_sun50i_h6.c | 7 |
4 files changed, 31 insertions, 11 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d3ed62add99..6ba9ed2bb2a 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -121,7 +121,7 @@ config AXP_PMIC_BUS config SUNXI_SRAM_ADDRESS hex default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5 - default 0x20000 if SUN50I_GEN_H6 + default 0x20000 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2 default 0x0 ---help--- Older Allwinner SoCs have their mask boot ROM mapped just below 4GB, @@ -183,6 +183,14 @@ config SUN50I_GEN_H6 Select this for sunxi SoCs which have H6 like peripherals, clocks and memory map. +config SUNXI_GEN_NCAT2 + bool + select MMC_SUNXI_HAS_NEW_MODE + select SUPPORT_SPL + ---help--- + Select this for sunxi SoCs which have D1 like peripherals, clocks + and memory map. + config SUNXI_DRAM_DW bool ---help--- @@ -804,6 +812,7 @@ config VIDEO_SUNXI depends on !MACH_SUN9I depends on !MACH_SUN50I depends on !SUN50I_GEN_H6 + depends on !SUNXI_GEN_NCAT2 select VIDEO select DISPLAY imply VIDEO_DT_SIMPLEFB @@ -1017,6 +1026,7 @@ config SPL_STACK_R_ADDR default 0x2fe00000 if MACH_SUN9I default 0x4fe00000 if MACH_SUN50I default 0x4fe00000 if SUN50I_GEN_H6 + default 0x4fe00000 if SUNXI_GEN_NCAT2 config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 671211e9322..1d4c70ec352 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o obj-$(CONFIG_SUN50I_GEN_H6) += clock_sun50i_h6.o +obj-$(CONFIG_SUNXI_GEN_NCAT2) += clock_sun50i_h6.o ifndef CONFIG_ARM64 obj-y += timer.o endif diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 4a1a0eacdba..d572314f0da 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -176,13 +176,19 @@ static int gpio_init(void) #error Unsupported console port number. Please fix pin mux settings in board.c #endif -#ifdef CONFIG_SUN50I_GEN_H6 - /* Update PIO power bias configuration by copy hardware detected value */ - val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL); - writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL); - val = readl(SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL); - writel(val, SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL); -#endif + /* + * Update PIO power bias configuration by copying the hardware + * detected value. + */ + if (IS_ENABLED(CONFIG_SUN50I_GEN_H6) || + IS_ENABLED(CONFIG_SUN50I_GEN_NCAT2)) { + val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL); + writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL); + } + if (IS_ENABLED(CONFIG_SUN50I_GEN_H6)) { + val = readl(SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL); + writel(val, SUNXI_R_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL); + } return 0; } @@ -481,7 +487,7 @@ void reset_cpu(void) /* sun5i sometimes gets stuck without this */ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); } -#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) +#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) || defined(CONFIG_SUNXI_GEN_NCAT2) #if defined(CONFIG_MACH_SUN50I_H6) /* WDOG is broken for some H6 rev. use the R_WDOG instead */ static const struct sunxi_wdog *wdog = diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c index 7926394cf76..767a39fa2ab 100644 --- a/arch/arm/mach-sunxi/clock_sun50i_h6.c +++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c @@ -18,8 +18,11 @@ void clock_init_safe(void) setbits_le32(&prcm->res_cal_ctrl, 2); } - clrbits_le32(&prcm->res_cal_ctrl, 1); - setbits_le32(&prcm->res_cal_ctrl, 1); + if (IS_ENABLED(CONFIG_MACH_SUN50I_H616) || + IS_ENABLED(CONFIG_MACH_SUN50I_H6)) { + clrbits_le32(&prcm->res_cal_ctrl, 1); + setbits_le32(&prcm->res_cal_ctrl, 1); + } if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) { /* set key field for ldo enable */ |