diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc85xx/start.S')
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/start.S | 90 |
1 files changed, 83 insertions, 7 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 8e99ef6c688..6aabc30c283 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -82,6 +82,9 @@ .globl _start_e500 _start_e500: +/* Enable debug exception */ + li r1,MSR_DE + mtmsr r1 #if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC) /* ISBC uses L2 as stack. @@ -179,6 +182,72 @@ l2_disabled: andi. r1,r3,L1CSR0_DCE@l beq 2b +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) +/* + * TLB entry for debuggging in AS1 + * Create temporary TLB entry in AS0 to handle debug exception + * As on debug exception MSR is cleared i.e. Address space is changed + * to 0. A TLB entry (in AS0) is required to handle debug exception generated + * in AS1. + */ + + lis r6,FSL_BOOKE_MAS0(1, + CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h + ori r6,r6,FSL_BOOKE_MAS0(1, + CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l + +#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. + * and this window is outside of 4K boot window. + */ + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l + + lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, + (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, + (MAS2_I|MAS2_G))@l + + /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ + lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l +#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l + + lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l + + lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@l +#else +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * because "nexti" will resize TLB to 4K + */ + lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l + + lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h + ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, + (MAS2_I))@l + lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@l +#endif + mtspr MAS0,r6 + mtspr MAS1,r7 + mtspr MAS2,r8 + mtspr MAS3,r9 + tlbwe + isync +#endif + /* * Ne need to setup interrupt vector for NAND SPL * because NAND SPL never compiles it. @@ -733,8 +802,8 @@ create_init_ram_area: msync tlbwe - lis r6,MSR_IS|MSR_DS@h - ori r6,r6,MSR_IS|MSR_DS@l + lis r6,MSR_IS|MSR_DS|MSR_DE@h + ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l lis r7,switch_as@h ori r7,r7,switch_as@l @@ -1372,17 +1441,24 @@ relocate_code: 7: sync /* Wait for all icbi to complete on bus */ isync - /* - * Re-point the IVPR at RAM - */ - mtspr IVPR,r10 - /* * We are done. Do not return, instead branch to second part of board * initialization, now running from RAM. */ addi r0,r10,in_ram - _start + _START_OFFSET + + /* + * As IVPR is going to point RAM address, + * Make sure IVOR15 has valid opcode to support debugger + */ + mtspr IVOR15,r0 + + /* + * Re-point the IVPR at RAM + */ + mtspr IVPR,r10 + mtlr r0 blr /* NEVER RETURNS! */ .globl in_ram |