diff options
Diffstat (limited to 'arch/x86/cpu/broadwell/cpu.c')
| -rw-r--r-- | arch/x86/cpu/broadwell/cpu.c | 761 |
1 files changed, 761 insertions, 0 deletions
diff --git a/arch/x86/cpu/broadwell/cpu.c b/arch/x86/cpu/broadwell/cpu.c new file mode 100644 index 00000000000..3ba21aacecd --- /dev/null +++ b/arch/x86/cpu/broadwell/cpu.c @@ -0,0 +1,761 @@ +/* + * Copyright (c) 2016 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + * + * Based on code from coreboot src/soc/intel/broadwell/cpu.c + */ + +#include <common.h> +#include <dm.h> +#include <cpu.h> +#include <asm/cpu.h> +#include <asm/cpu_x86.h> +#include <asm/cpu_common.h> +#include <asm/intel_regs.h> +#include <asm/msr.h> +#include <asm/post.h> +#include <asm/turbo.h> +#include <asm/arch/cpu.h> +#include <asm/arch/pch.h> +#include <asm/arch/rcb.h> + +struct cpu_broadwell_priv { + bool ht_disabled; +}; + +/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ +static const u8 power_limit_time_sec_to_msr[] = { + [0] = 0x00, + [1] = 0x0a, + [2] = 0x0b, + [3] = 0x4b, + [4] = 0x0c, + [5] = 0x2c, + [6] = 0x4c, + [7] = 0x6c, + [8] = 0x0d, + [10] = 0x2d, + [12] = 0x4d, + [14] = 0x6d, + [16] = 0x0e, + [20] = 0x2e, + [24] = 0x4e, + [28] = 0x6e, + [32] = 0x0f, + [40] = 0x2f, + [48] = 0x4f, + [56] = 0x6f, + [64] = 0x10, + [80] = 0x30, + [96] = 0x50, + [112] = 0x70, + [128] = 0x11, +}; + +/* Convert POWER_LIMIT_1_TIME MSR value to seconds */ +static const u8 power_limit_time_msr_to_sec[] = { + [0x00] = 0, + [0x0a] = 1, + [0x0b] = 2, + [0x4b] = 3, + [0x0c] = 4, + [0x2c] = 5, + [0x4c] = 6, + [0x6c] = 7, + [0x0d] = 8, + [0x2d] = 10, + [0x4d] = 12, + [0x6d] = 14, + [0x0e] = 16, + [0x2e] = 20, + [0x4e] = 24, + [0x6e] = 28, + [0x0f] = 32, + [0x2f] = 40, + [0x4f] = 48, + [0x6f] = 56, + [0x10] = 64, + [0x30] = 80, + [0x50] = 96, + [0x70] = 112, + [0x11] = 128, +}; + +int arch_cpu_init_dm(void) +{ + struct udevice *dev; + int ret; + + /* Start up the LPC so we have serial */ + ret = uclass_first_device(UCLASS_LPC, &dev); + if (ret) + return ret; + if (!dev) + return -ENODEV; + ret = cpu_set_flex_ratio_to_tdp_nominal(); + if (ret) + return ret; + + return 0; +} + +void set_max_freq(void) +{ + msr_t msr, perf_ctl, platform_info; + + /* Check for configurable TDP option */ + platform_info = msr_read(MSR_PLATFORM_INFO); + + if ((platform_info.hi >> 1) & 3) { + /* Set to nominal TDP ratio */ + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else { + /* Platform Info bits 15:8 give max ratio */ + msr = msr_read(MSR_PLATFORM_INFO); + perf_ctl.lo = msr.lo & 0xff00; + } + + perf_ctl.hi = 0; + msr_write(IA32_PERF_CTL, perf_ctl); + + debug("CPU: frequency set to %d MHz\n", + ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK); +} + +int arch_cpu_init(void) +{ + post_code(POST_CPU_INIT); + + return x86_cpu_init_f(); +} + +int print_cpuinfo(void) +{ + char processor_name[CPU_MAX_NAME_LEN]; + const char *name; + int ret; + + set_max_freq(); + + ret = cpu_common_init(); + if (ret) + return ret; + gd->arch.pei_boot_mode = PEI_BOOT_NONE; + + /* Print processor name */ + name = cpu_get_name(processor_name); + printf("CPU: %s\n", name); + + return 0; +} + +/* + * The core 100MHz BLCK is disabled in deeper c-states. One needs to calibrate + * the 100MHz BCLCK against the 24MHz BLCK to restore the clocks properly + * when a core is woken up + */ +static int pcode_ready(void) +{ + int wait_count; + const int delay_step = 10; + + wait_count = 0; + do { + if (!(readl(MCHBAR_REG(BIOS_MAILBOX_INTERFACE)) & + MAILBOX_RUN_BUSY)) + return 0; + wait_count += delay_step; + udelay(delay_step); + } while (wait_count < 1000); + + return -ETIMEDOUT; +} + +static u32 pcode_mailbox_read(u32 command) +{ + int ret; + + ret = pcode_ready(); + if (ret) { + debug("PCODE: mailbox timeout on wait ready\n"); + return ret; + } + + /* Send command and start transaction */ + writel(command | MAILBOX_RUN_BUSY, MCHBAR_REG(BIOS_MAILBOX_INTERFACE)); + + ret = pcode_ready(); + if (ret) { + debug("PCODE: mailbox timeout on completion\n"); + return ret; + } + + /* Read mailbox */ + return readl(MCHBAR_REG(BIOS_MAILBOX_DATA)); +} + +static int pcode_mailbox_write(u32 command, u32 data) +{ + int ret; + + ret = pcode_ready(); + if (ret) { + debug("PCODE: mailbox timeout on wait ready\n"); + return ret; + } + + writel(data, MCHBAR_REG(BIOS_MAILBOX_DATA)); + + /* Send command and start transaction */ + writel(command | MAILBOX_RUN_BUSY, MCHBAR_REG(BIOS_MAILBOX_INTERFACE)); + + ret = pcode_ready(); + if (ret) { + debug("PCODE: mailbox timeout on completion\n"); + return ret; + } + + return 0; +} + +/* @dev is the CPU device */ +static void initialize_vr_config(struct udevice *dev) +{ + int ramp, min_vid; + msr_t msr; + + debug("Initializing VR config\n"); + + /* Configure VR_CURRENT_CONFIG */ + msr = msr_read(MSR_VR_CURRENT_CONFIG); + /* + * Preserve bits 63 and 62. Bit 62 is PSI4 enable, but it is only valid + * on ULT systems + */ + msr.hi &= 0xc0000000; + msr.hi |= (0x01 << (52 - 32)); /* PSI3 threshold - 1A */ + msr.hi |= (0x05 << (42 - 32)); /* PSI2 threshold - 5A */ + msr.hi |= (0x14 << (32 - 32)); /* PSI1 threshold - 20A */ + msr.hi |= (1 << (62 - 32)); /* Enable PSI4 */ + /* Leave the max instantaneous current limit (12:0) to default */ + msr_write(MSR_VR_CURRENT_CONFIG, msr); + + /* Configure VR_MISC_CONFIG MSR */ + msr = msr_read(MSR_VR_MISC_CONFIG); + /* Set the IOUT_SLOPE scalar applied to dIout in U10.1.9 format */ + msr.hi &= ~(0x3ff << (40 - 32)); + msr.hi |= (0x200 << (40 - 32)); /* 1.0 */ + /* Set IOUT_OFFSET to 0 */ + msr.hi &= ~0xff; + /* Set entry ramp rate to slow */ + msr.hi &= ~(1 << (51 - 32)); + /* Enable decay mode on C-state entry */ + msr.hi |= (1 << (52 - 32)); + /* Set the slow ramp rate */ + msr.hi &= ~(0x3 << (53 - 32)); + /* Configure the C-state exit ramp rate */ + ramp = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "intel,slow-ramp", + -1); + if (ramp != -1) { + /* Configured slow ramp rate */ + msr.hi |= ((ramp & 0x3) << (53 - 32)); + /* Set exit ramp rate to slow */ + msr.hi &= ~(1 << (50 - 32)); + } else { + /* Fast ramp rate / 4 */ + msr.hi |= (0x01 << (53 - 32)); + /* Set exit ramp rate to fast */ + msr.hi |= (1 << (50 - 32)); + } + /* Set MIN_VID (31:24) to allow CPU to have full control */ + msr.lo &= ~0xff000000; + min_vid = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "intel,min-vid", + 0); + msr.lo |= (min_vid & 0xff) << 24; + msr_write(MSR_VR_MISC_CONFIG, msr); + + /* Configure VR_MISC_CONFIG2 MSR */ + msr = msr_read(MSR_VR_MISC_CONFIG2); + msr.lo &= ~0xffff; + /* + * Allow CPU to control minimum voltage completely (15:8) and + * set the fast ramp voltage in 10mV steps + */ + if (cpu_get_family_model() == BROADWELL_FAMILY_ULT) + msr.lo |= 0x006a; /* 1.56V */ + else + msr.lo |= 0x006f; /* 1.60V */ + msr_write(MSR_VR_MISC_CONFIG2, msr); + + /* Set C9/C10 VCC Min */ + pcode_mailbox_write(MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE, 0x1f1f); +} + +static int calibrate_24mhz_bclk(void) +{ + int err_code; + int ret; + + ret = pcode_ready(); + if (ret) + return ret; + + /* A non-zero value initiates the PCODE calibration */ + writel(~0, MCHBAR_REG(BIOS_MAILBOX_DATA)); + writel(MAILBOX_RUN_BUSY | MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL, + MCHBAR_REG(BIOS_MAILBOX_INTERFACE)); + + ret = pcode_ready(); + if (ret) + return ret; + + err_code = readl(MCHBAR_REG(BIOS_MAILBOX_INTERFACE)) & 0xff; + + debug("PCODE: 24MHz BLCK calibration response: %d\n", err_code); + + /* Read the calibrated value */ + writel(MAILBOX_RUN_BUSY | MAILBOX_BIOS_CMD_READ_CALIBRATION, + MCHBAR_REG(BIOS_MAILBOX_INTERFACE)); + + ret = pcode_ready(); + if (ret) + return ret; + + debug("PCODE: 24MHz BLCK calibration value: 0x%08x\n", + readl(MCHBAR_REG(BIOS_MAILBOX_DATA))); + + return 0; +} + +static void configure_pch_power_sharing(void) +{ + u32 pch_power, pch_power_ext, pmsync, pmsync2; + int i; + + /* Read PCH Power levels from PCODE */ + pch_power = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER); + pch_power_ext = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT); + + debug("PCH Power: PCODE Levels 0x%08x 0x%08x\n", pch_power, + pch_power_ext); + + pmsync = readl(RCB_REG(PMSYNC_CONFIG)); + pmsync2 = readl(RCB_REG(PMSYNC_CONFIG2)); + + /* + * Program PMSYNC_TPR_CONFIG PCH power limit values + * pmsync[0:4] = mailbox[0:5] + * pmsync[8:12] = mailbox[6:11] + * pmsync[16:20] = mailbox[12:17] + */ + for (i = 0; i < 3; i++) { + u32 level = pch_power & 0x3f; + pch_power >>= 6; + pmsync &= ~(0x1f << (i * 8)); + pmsync |= (level & 0x1f) << (i * 8); + } + writel(pmsync, RCB_REG(PMSYNC_CONFIG)); + + /* + * Program PMSYNC_TPR_CONFIG2 Extended PCH power limit values + * pmsync2[0:4] = mailbox[23:18] + * pmsync2[8:12] = mailbox_ext[6:11] + * pmsync2[16:20] = mailbox_ext[12:17] + * pmsync2[24:28] = mailbox_ext[18:22] + */ + pmsync2 &= ~0x1f; + pmsync2 |= pch_power & 0x1f; + + for (i = 1; i < 4; i++) { + u32 level = pch_power_ext & 0x3f; + pch_power_ext >>= 6; + pmsync2 &= ~(0x1f << (i * 8)); + pmsync2 |= (level & 0x1f) << (i * 8); + } + writel(pmsync2, RCB_REG(PMSYNC_CONFIG2)); +} + +static int bsp_init_before_ap_bringup(struct udevice *dev) +{ + int ret; + + initialize_vr_config(dev); + ret = calibrate_24mhz_bclk(); + if (ret) + return ret; + configure_pch_power_sharing(); + + return 0; +} + +int cpu_config_tdp_levels(void) +{ + msr_t platform_info; + + /* Bits 34:33 indicate how many levels supported */ + platform_info = msr_read(MSR_PLATFORM_INFO); + return (platform_info.hi >> 1) & 3; +} + +static void set_max_ratio(void) +{ + msr_t msr, perf_ctl; + + perf_ctl.hi = 0; + + /* Check for configurable TDP option */ + if (turbo_get_state() == TURBO_ENABLED) { + msr = msr_read(MSR_NHM_TURBO_RATIO_LIMIT); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else if (cpu_config_tdp_levels()) { + /* Set to nominal TDP ratio */ + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else { + /* Platform Info bits 15:8 give max ratio */ + msr = msr_read(MSR_PLATFORM_INFO); + perf_ctl.lo = msr.lo & 0xff00; + } + msr_write(IA32_PERF_CTL, perf_ctl); + + debug("cpu: frequency set to %d\n", + ((perf_ctl.lo >> 8) & 0xff) * CPU_BCLK); +} + +int broadwell_init(struct udevice *dev) +{ + struct cpu_broadwell_priv *priv = dev_get_priv(dev); + int num_threads; + int num_cores; + msr_t msr; + int ret; + + msr = msr_read(CORE_THREAD_COUNT_MSR); + num_threads = (msr.lo >> 0) & 0xffff; + num_cores = (msr.lo >> 16) & 0xffff; + debug("CPU has %u cores, %u threads enabled\n", num_cores, + num_threads); + + priv->ht_disabled = num_threads == num_cores; + + ret = bsp_init_before_ap_bringup(dev); + if (ret) + return ret; + + set_max_ratio(); + + return ret; +} + +static void configure_mca(void) +{ + msr_t msr; + const unsigned int mcg_cap_msr = 0x179; + int i; + int num_banks; + + msr = msr_read(mcg_cap_msr); + num_banks = msr.lo & 0xff; + msr.lo = 0; + msr.hi = 0; + /* + * TODO(adurbin): This should only be done on a cold boot. Also, some + * of these banks are core vs package scope. For now every CPU clears + * every bank + */ + for (i = 0; i < num_banks; i++) + msr_write(MSR_IA32_MC0_STATUS + (i * 4), msr); +} + +static void enable_lapic_tpr(void) +{ + msr_t msr; + + msr = msr_read(MSR_PIC_MSG_CONTROL); + msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */ + msr_write(MSR_PIC_MSG_CONTROL, msr); +} + + +static void configure_c_states(void) +{ + msr_t msr; + + msr = msr_read(MSR_PMG_CST_CONFIG_CONTROL); + msr.lo |= (1 << 31); /* Timed MWAIT Enable */ + msr.lo |= (1 << 30); /* Package c-state Undemotion Enable */ + msr.lo |= (1 << 29); /* Package c-state Demotion Enable */ + msr.lo |= (1 << 28); /* C1 Auto Undemotion Enable */ + msr.lo |= (1 << 27); /* C3 Auto Undemotion Enable */ + msr.lo |= (1 << 26); /* C1 Auto Demotion Enable */ + msr.lo |= (1 << 25); /* C3 Auto Demotion Enable */ + msr.lo &= ~(1 << 10); /* Disable IO MWAIT redirection */ + /* The deepest package c-state defaults to factory-configured value */ + msr_write(MSR_PMG_CST_CONFIG_CONTROL, msr); + + msr = msr_read(MSR_MISC_PWR_MGMT); + msr.lo &= ~(1 << 0); /* Enable P-state HW_ALL coordination */ + msr_write(MSR_MISC_PWR_MGMT, msr); + + msr = msr_read(MSR_POWER_CTL); + msr.lo |= (1 << 18); /* Enable Energy Perf Bias MSR 0x1b0 */ + msr.lo |= (1 << 1); /* C1E Enable */ + msr.lo |= (1 << 0); /* Bi-directional PROCHOT# */ + msr_write(MSR_POWER_CTL, msr); + + /* C-state Interrupt Response Latency Control 0 - package C3 latency */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_0_LIMIT; + msr_write(MSR_C_STATE_LATENCY_CONTROL_0, msr); + + /* C-state Interrupt Response Latency Control 1 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_1_LIMIT; + msr_write(MSR_C_STATE_LATENCY_CONTROL_1, msr); + + /* C-state Interrupt Response Latency Control 2 - package C6/C7 short */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_2_LIMIT; + msr_write(MSR_C_STATE_LATENCY_CONTROL_2, msr); + + /* C-state Interrupt Response Latency Control 3 - package C8 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_3_LIMIT; + msr_write(MSR_C_STATE_LATENCY_CONTROL_3, msr); + + /* C-state Interrupt Response Latency Control 4 - package C9 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_4_LIMIT; + msr_write(MSR_C_STATE_LATENCY_CONTROL_4, msr); + + /* C-state Interrupt Response Latency Control 5 - package C10 */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | C_STATE_LATENCY_CONTROL_5_LIMIT; + msr_write(MSR_C_STATE_LATENCY_CONTROL_5, msr); +} + +static void configure_misc(void) +{ + msr_t msr; + + msr = msr_read(MSR_IA32_MISC_ENABLE); + msr.lo |= (1 << 0); /* Fast String enable */ + msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ + msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ + msr_write(MSR_IA32_MISC_ENABLE, msr); + + /* Disable thermal interrupts */ + msr.lo = 0; + msr.hi = 0; + msr_write(MSR_IA32_THERM_INTERRUPT, msr); + + /* Enable package critical interrupt only */ + msr.lo = 1 << 4; + msr.hi = 0; + msr_write(MSR_IA32_PACKAGE_THERM_INTERRUPT, msr); +} + +static void configure_thermal_target(struct udevice *dev) +{ + int tcc_offset; + msr_t msr; + + tcc_offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "intel,tcc-offset", 0); + + /* Set TCC activaiton offset if supported */ + msr = msr_read(MSR_PLATFORM_INFO); + if ((msr.lo & (1 << 30)) && tcc_offset) { + msr = msr_read(MSR_TEMPERATURE_TARGET); + msr.lo &= ~(0xf << 24); /* Bits 27:24 */ + msr.lo |= (tcc_offset & 0xf) << 24; + msr_write(MSR_TEMPERATURE_TARGET, msr); + } +} + +static void configure_dca_cap(void) +{ + struct cpuid_result cpuid_regs; + msr_t msr; + + /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */ + cpuid_regs = cpuid(1); + if (cpuid_regs.ecx & (1 << 18)) { + msr = msr_read(MSR_IA32_PLATFORM_DCA_CAP); + msr.lo |= 1; + msr_write(MSR_IA32_PLATFORM_DCA_CAP, msr); + } +} + +static void set_energy_perf_bias(u8 policy) +{ + msr_t msr; + int ecx; + + /* Determine if energy efficient policy is supported */ + ecx = cpuid_ecx(0x6); + if (!(ecx & (1 << 3))) + return; + + /* Energy Policy is bits 3:0 */ + msr = msr_read(MSR_IA32_ENERGY_PERFORMANCE_BIAS); + msr.lo &= ~0xf; + msr.lo |= policy & 0xf; + msr_write(MSR_IA32_ENERGY_PERFORMANCE_BIAS, msr); + + debug("cpu: energy policy set to %u\n", policy); +} + +/* All CPUs including BSP will run the following function */ +static void cpu_core_init(struct udevice *dev) +{ + /* Clear out pending MCEs */ + configure_mca(); + + /* Enable the local cpu apics */ + enable_lapic_tpr(); + + /* Configure C States */ + configure_c_states(); + + /* Configure Enhanced SpeedStep and Thermal Sensors */ + configure_misc(); + + /* Thermal throttle activation offset */ + configure_thermal_target(dev); + + /* Enable Direct Cache Access */ + configure_dca_cap(); + + /* Set energy policy */ + set_energy_perf_bias(ENERGY_POLICY_NORMAL); + + /* Enable Turbo */ + turbo_enable(); +} + +/* + * Configure processor power limits if possible + * This must be done AFTER set of BIOS_RESET_CPL + */ +void cpu_set_power_limits(int power_limit_1_time) +{ + msr_t msr; + msr_t limit; + unsigned power_unit; + unsigned tdp, min_power, max_power, max_time; + u8 power_limit_1_val; + + msr = msr_read(MSR_PLATFORM_INFO); + if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr)) + power_limit_1_time = 28; + + if (!(msr.lo & PLATFORM_INFO_SET_TDP)) + return; + + /* Get units */ + msr = msr_read(MSR_PKG_POWER_SKU_UNIT); + power_unit = 2 << ((msr.lo & 0xf) - 1); + + /* Get power defaults for this SKU */ + msr = msr_read(MSR_PKG_POWER_SKU); + tdp = msr.lo & 0x7fff; + min_power = (msr.lo >> 16) & 0x7fff; + max_power = msr.hi & 0x7fff; + max_time = (msr.hi >> 16) & 0x7f; + + debug("CPU TDP: %u Watts\n", tdp / power_unit); + + if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) + power_limit_1_time = power_limit_time_msr_to_sec[max_time]; + + if (min_power > 0 && tdp < min_power) + tdp = min_power; + + if (max_power > 0 && tdp > max_power) + tdp = max_power; + + power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; + + /* Set long term power limit to TDP */ + limit.lo = 0; + limit.lo |= tdp & PKG_POWER_LIMIT_MASK; + limit.lo |= PKG_POWER_LIMIT_EN; + limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << + PKG_POWER_LIMIT_TIME_SHIFT; + + /* Set short term power limit to 1.25 * TDP */ + limit.hi = 0; + limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; + limit.hi |= PKG_POWER_LIMIT_EN; + /* Power limit 2 time is only programmable on server SKU */ + + msr_write(MSR_PKG_POWER_LIMIT, limit); + + /* Set power limit values in MCHBAR as well */ + writel(limit.lo, MCHBAR_REG(MCH_PKG_POWER_LIMIT_LO)); + writel(limit.hi, MCHBAR_REG(MCH_PKG_POWER_LIMIT_HI)); + + /* Set DDR RAPL power limit by copying from MMIO to MSR */ + msr.lo = readl(MCHBAR_REG(MCH_DDR_POWER_LIMIT_LO)); + msr.hi = readl(MCHBAR_REG(MCH_DDR_POWER_LIMIT_HI)); + msr_write(MSR_DDR_RAPL_LIMIT, msr); + + /* Use nominal TDP values for CPUs with configurable TDP */ + if (cpu_config_tdp_levels()) { + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + limit.hi = 0; + limit.lo = msr.lo & 0xff; + msr_write(MSR_TURBO_ACTIVATION_RATIO, limit); + } +} + +static int broadwell_get_info(struct udevice *dev, struct cpu_info *info) +{ + msr_t msr; + + msr = msr_read(IA32_PERF_CTL); + info->cpu_freq = ((msr.lo >> 8) & 0xff) * BROADWELL_BCLK * 1000000; + info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU | + 1 << CPU_FEAT_UCODE | 1 << CPU_FEAT_DEVICE_ID; + + return 0; +} + +static int broadwell_get_count(struct udevice *dev) +{ + return 4; +} + +static int cpu_x86_broadwell_probe(struct udevice *dev) +{ + if (dev->seq == 0) { + cpu_core_init(dev); + return broadwell_init(dev); + } + + return 0; +} + +static const struct cpu_ops cpu_x86_broadwell_ops = { + .get_desc = cpu_x86_get_desc, + .get_info = broadwell_get_info, + .get_count = broadwell_get_count, +}; + +static const struct udevice_id cpu_x86_broadwell_ids[] = { + { .compatible = "intel,core-i3-gen5" }, + { } +}; + +U_BOOT_DRIVER(cpu_x86_broadwell_drv) = { + .name = "cpu_x86_broadwell", + .id = UCLASS_CPU, + .of_match = cpu_x86_broadwell_ids, + .bind = cpu_x86_bind, + .probe = cpu_x86_broadwell_probe, + .ops = &cpu_x86_broadwell_ops, + .priv_auto_alloc_size = sizeof(struct cpu_broadwell_priv), +}; |