diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi | 11 | ||||
-rw-r--r-- | arch/arm/dts/imx8qm-dmsse20-a1.dts | 397 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/clock.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/imx8/Kconfig | 8 | ||||
-rw-r--r-- | arch/arm/mach-imx/imx8m/Kconfig | 7 | ||||
-rw-r--r-- | arch/arm/mach-imx/imx8m/soc.c | 36 | ||||
-rw-r--r-- | arch/arm/mach-imx/mx6/clock.c | 66 | ||||
-rw-r--r-- | arch/arm/mach-imx/romapi.c | 2 |
9 files changed, 495 insertions, 35 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8c10346a965..935b2f1517f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -961,6 +961,7 @@ dtb-$(CONFIG_ARCH_IMX8) += \ fsl-imx8qm-apalis.dtb \ fsl-imx8qm-mek.dtb \ imx8qm-cgtqmx8.dtb \ + imx8qm-dmsse20-a1.dtb \ imx8qm-rom7720-a1.dtb \ fsl-imx8qxp-ai_ml.dtb \ fsl-imx8qxp-colibri.dtb \ diff --git a/arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi b/arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi new file mode 100644 index 00000000000..46a4dfe4e8a --- /dev/null +++ b/arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "imx8mq-u-boot.dtsi" + +&pinctrl_uart1 { + bootph-pre-ram; +}; + +&uart1 { /* console */ + bootph-pre-ram; +}; diff --git a/arch/arm/dts/imx8qm-dmsse20-a1.dts b/arch/arm/dts/imx8qm-dmsse20-a1.dts new file mode 100644 index 00000000000..cff150de07c --- /dev/null +++ b/arch/arm/dts/imx8qm-dmsse20-a1.dts @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2017-2018 NXP + * Copyright 2019-2023 Kococonnector GmbH + */ + +/dts-v1/; + +/* First 128KB is for PSCI ATF. */ +/memreserve/ 0x80000000 0x00020000; + +#include "fsl-imx8qm.dtsi" +#include "imx8qm-u-boot.dtsi" + +/ { + model = "Advantech iMX8QM DMSSE20"; + compatible = "fsl,imx8qm-mek", "fsl,imx8qm"; + + aliases { + mmc0 = &usdhc1; + mmc2 = &usdhc3; + }; + + chosen { + bootargs = "console=ttyLP0,115200 earlycon"; + stdout-path = &lpuart0; + }; + + reg_usb_otg1_vbus: usb_otg1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: usdhc2_vmmc { + compatible = "regulator-fixed"; + regulator-name = "sw-3p3-sd1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx8qm-mek { + pinctrl_hog: hoggrp { + fsl,pins = < + SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000048 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0 + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000060 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000060 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000060 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000060 + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000060 + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000060 + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000060 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000060 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000060 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000060 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000060 + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000060 + >; + }; + + pinctrl_fec2: fec2grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0 + SC_P_ENET1_MDC_CONN_ENET1_MDC 0x06000020 + SC_P_ENET1_MDIO_CONN_ENET1_MDIO 0x06000020 + SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060 + SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060 + SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060 + SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060 + SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060 + SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060 + SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060 + SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060 + SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060 + SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060 + SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060 + SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060 + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + SC_P_GPT0_CLK_DMA_I2C1_SCL 0xc600004c + SC_P_GPT0_CAPTURE_DMA_I2C1_SDA 0xc600004c + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + SC_P_GPT1_CLK_DMA_I2C2_SCL 0xc600004c + SC_P_GPT1_CAPTURE_DMA_I2C2_SDA 0xc600004c + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_DMA_UART0_RX 0x06000020 + SC_P_UART0_TX_DMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_rtc_mc_8803: rtc-mc-8803-grp{ + fsl,pins = < + SC_P_SIM0_POWER_EN_DMA_I2C3_SDA 0xc600004c + SC_P_SIM0_PD_DMA_I2C3_SCL 0xc600004c + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp-100mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp-200mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000020 + SC_P_USDHC1_VSELECT_LSIO_GPIO4_IO08 0x00000020 + >; + }; + + pinctrl_usdhc3_gpio: usdhc3grpgpio { + fsl,pins = < + SC_P_USDHC2_WP_LSIO_GPIO4_IO11 0x00000021 + SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041 + SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021 + SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021 + SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021 + SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021 + SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021 + SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000040 + SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000020 + SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000020 + SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000020 + SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000020 + SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000020 + SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000020 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000040 + SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000020 + SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000020 + SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000020 + SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000020 + SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000020 + SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000020 + >; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + bus-width = <4>; + cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-names = "default","state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>; + wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec1 { + fsl,ar8031-phy-fixup; + fsl,magic-packet; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; + }; +}; + +&fec2 { + fsl,ar8031-phy-fixup; + fsl,magic-packet; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + status = "okay"; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; +}; + +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_mc_8803>; + status = "okay"; + + rv8803@32 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + 24c02@50 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,24c04"; + reg = <0x50>; + }; +}; + +&lpuart0 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index 8ae49715789..81af89c631f 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -41,6 +41,8 @@ enum mxc_clock { MXC_SATA_CLK, MXC_NFC_CLK, MXC_I2C_CLK, + MXC_LCDIF1_CLK, + MXC_LCDIF2_CLK, }; enum ldb_di_clock { diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 018b87b85b7..15f844f5030 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -91,6 +91,13 @@ config TARGET_IMX8QM_ROM7720_A1 select SUPPORT_SPL select IMX8QM +config TARGET_IMX8QM_DMSSE20_A1 + bool "Support i.MX8QM DMS-SE20-A1 board" + select BINMAN + select BOARD_LATE_INIT + select SUPPORT_SPL + select IMX8QM + config TARGET_IMX8QXP_MEK bool "Support i.MX8QXP MEK board" select BINMAN @@ -105,6 +112,7 @@ endchoice source "board/freescale/imx8qm_mek/Kconfig" source "board/freescale/imx8qxp_mek/Kconfig" source "board/congatec/cgtqmx8/Kconfig" +source "board/advantech/imx8qm_dmsse20_a1/Kconfig" source "board/advantech/imx8qm_rom7720_a1/Kconfig" source "board/toradex/apalis-imx8/Kconfig" source "board/toradex/colibri-imx8x/Kconfig" diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index dc51f971d45..7639439bdc9 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -60,6 +60,12 @@ config TARGET_IMX8MQ_PHANBELL select IMX8MQ select IMX8M_LPDDR4 +config TARGET_IMX8MQ_REFORM2 + bool "imx8mq_reform2" + select BINMAN + select IMX8MQ + select IMX8M_LPDDR4 + config TARGET_IMX8MM_DATA_MODUL_EDM_SBC bool "Data Modul eDM SBC i.MX8M Mini" select BINMAN @@ -362,6 +368,7 @@ source "board/kontron/pitx_imx8m/Kconfig" source "board/kontron/sl-mx8mm/Kconfig" source "board/menlo/mx8menlo/Kconfig" source "board/msc/sm2s_imx8mp/Kconfig" +source "board/mntre/imx8mq_reform2/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" source "board/phytec/phycore_imx8mp/Kconfig" source "board/purism/librem5/Kconfig" diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index df865e997d3..4705e6c1192 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -914,6 +914,8 @@ static int low_drive_gpu_freq(void *blob) if (cnt != 7) printf("Warning: %s, assigned-clock-rates count %d\n", nodes_path_8mn[0], cnt); + if (cnt < 2) + return -1; assignedclks[cnt - 1] = 200000000; assignedclks[cnt - 2] = 200000000; @@ -1395,40 +1397,6 @@ usb_modify_speed: } #endif -#ifdef CONFIG_OF_BOARD_FIXUP -#ifndef CONFIG_SPL_BUILD -int board_fix_fdt(void *fdt) -{ - if (is_imx8mpul()) { - int i = 0; - int nodeoff, ret; - const char *status = "disabled"; - static const char * const dsi_nodes[] = { - "/soc@0/bus@32c00000/mipi_dsi@32e60000", - "/soc@0/bus@32c00000/lcd-controller@32e80000", - "/dsi-host" - }; - - for (i = 0; i < ARRAY_SIZE(dsi_nodes); i++) { - nodeoff = fdt_path_offset(fdt, dsi_nodes[i]); - if (nodeoff > 0) { -set_status: - ret = fdt_setprop(fdt, nodeoff, "status", status, - strlen(status) + 1); - if (ret == -FDT_ERR_NOSPACE) { - ret = fdt_increase_size(fdt, 512); - if (!ret) - goto set_status; - } - } - } - } - - return 0; -} -#endif -#endif - #if !CONFIG_IS_ENABLED(SYSRESET) void reset_cpu(void) { diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c index cb9d629be40..1bdc568f9b1 100644 --- a/arch/arm/mach-imx/mx6/clock.c +++ b/arch/arm/mach-imx/mx6/clock.c @@ -213,6 +213,7 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num) static u32 decode_pll(enum pll_clocks pll, u32 infreq) { u32 div, test_div, pll_num, pll_denom; + u64 temp64; switch (pll) { case PLL_SYS: @@ -272,7 +273,10 @@ static u32 decode_pll(enum pll_clocks pll, u32 infreq) } test_div = 1 << (2 - test_div); - return infreq * (div + pll_num / pll_denom) / test_div; + temp64 = (u64)infreq; + temp64 *= pll_num; + do_div(temp64, pll_denom); + return infreq * div + (unsigned long)temp64; default: return 0; } @@ -414,6 +418,60 @@ static u32 get_uart_clk(void) return freq / (uart_podf + 1); } +static u32 get_lcd_clk(unsigned int ifnum) +{ + u32 pll_rate; + u32 pred, postd; + + if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() && + !is_mx6sll()) { + debug("This chip does't support lcd\n"); + return 0; + } + + pll_rate = decode_pll(PLL_VIDEO, MXC_HCLK); + if (ifnum == 1) { + if (!is_mx6sl()) { + pred = __raw_readl(&imx_ccm->cscdr2); + pred &= MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK; + pred = pred >> MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET; + + postd = readl(&imx_ccm->cbcmr); + postd &= MXC_CCM_CBCMR_LCDIF1_PODF_MASK; + postd = postd >> MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET; + } else { + pred = __raw_readl(&imx_ccm->cscdr2); + pred &= MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK; + pred = pred >> MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET; + + postd = readl(&imx_ccm->cscmr1); + postd &= MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET; + postd = postd >> MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET; + } + } else if (ifnum == 2) { + if (is_mx6sx()) { + pred = __raw_readl(&imx_ccm->cscdr2); + pred &= MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK; + pred = pred >> MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET; + + postd = readl(&imx_ccm->cscmr1); + postd &= MXC_CCM_CSCMR1_LCDIF2_PODF_MASK; + postd = postd >> MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET; + + } else { + goto if_err; + } + } else { + goto if_err; + } + + return DIV_ROUND_UP_ULL((u64)pll_rate, (postd + 1) * (pred + 1)); + +if_err: + debug("This chip not support lcd iterface %d\n", ifnum); + return 0; +} + static u32 get_cspi_clk(void) { u32 reg, cspi_podf; @@ -744,6 +802,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) } enable_lcdif_clock(base_addr, 1); + debug("pixel clock = %u\n", mxc_get_clock(MXC_LCDIF1_CLK)); } else if (is_mx6sx()) { /* Setting LCDIF2 for i.MX6SX */ if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) @@ -765,6 +824,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET)); enable_lcdif_clock(base_addr, 1); + debug("pixel clock = %u\n", mxc_get_clock(MXC_LCDIF2_CLK)); } } @@ -1269,6 +1329,10 @@ unsigned int mxc_get_clock(enum mxc_clock clk) return get_usdhc_clk(3); case MXC_SATA_CLK: return get_ahb_clk(); + case MXC_LCDIF1_CLK: + return get_lcd_clk(1); + case MXC_LCDIF2_CLK: + return get_lcd_clk(2); default: printf("Unsupported MXC CLK: %d\n", clk); break; diff --git a/arch/arm/mach-imx/romapi.c b/arch/arm/mach-imx/romapi.c index b49e7f80a28..ff0522c2d11 100644 --- a/arch/arm/mach-imx/romapi.c +++ b/arch/arm/mach-imx/romapi.c @@ -70,6 +70,8 @@ enum boot_device get_boot_device(void) boot_dev = SPI_NOR_BOOT; break; case BT_DEV_TYPE_USB: + if (!is_imx8ulp() && !is_imx9()) + boot_instance = 0; boot_dev = boot_instance + USB_BOOT; break; default: |