aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-aspeed/ast2500-board.c25
-rw-r--r--arch/arm/mach-aspeed/ast2500/Makefile1
-rw-r--r--arch/arm/mach-aspeed/ast2500/lowlevel_init.S41
3 files changed, 42 insertions, 25 deletions
diff --git a/arch/arm/mach-aspeed/ast2500-board.c b/arch/arm/mach-aspeed/ast2500-board.c
index f74dcbbb624..3482ee91efd 100644
--- a/arch/arm/mach-aspeed/ast2500-board.c
+++ b/arch/arm/mach-aspeed/ast2500-board.c
@@ -28,31 +28,6 @@
DECLARE_GLOBAL_DATA_PTR;
-void lowlevel_init(void)
-{
- /*
- * These two watchdogs need to be stopped as soon as possible,
- * otherwise the board might hang. By default they are set to
- * a very short timeout and even simple debug write to serial
- * console early in the init process might cause them to fire.
- */
- struct ast_wdt *flash_addr_wdt =
- (struct ast_wdt *)(WDT_BASE +
- sizeof(struct ast_wdt) *
- AST_FLASH_ADDR_DETECT_WDT);
-
- clrbits_le32(&flash_addr_wdt->ctrl, WDT_CTRL_EN);
-
-#ifndef CONFIG_FIRMWARE_2ND_BOOT
- struct ast_wdt *sec_boot_wdt =
- (struct ast_wdt *)(WDT_BASE +
- sizeof(struct ast_wdt) *
- AST_2ND_BOOT_WDT);
-
- clrbits_le32(&sec_boot_wdt->ctrl, WDT_CTRL_EN);
-#endif
-}
-
int board_init(void)
{
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/arch/arm/mach-aspeed/ast2500/Makefile b/arch/arm/mach-aspeed/ast2500/Makefile
index a35b239ef35..2e9e15d8313 100644
--- a/arch/arm/mach-aspeed/ast2500/Makefile
+++ b/arch/arm/mach-aspeed/ast2500/Makefile
@@ -1 +1,2 @@
+obj-y += lowlevel_init.o
obj-y += clk_ast2500.o sdram_ast2500.o
diff --git a/arch/arm/mach-aspeed/ast2500/lowlevel_init.S b/arch/arm/mach-aspeed/ast2500/lowlevel_init.S
new file mode 100644
index 00000000000..9ec3dd46b70
--- /dev/null
+++ b/arch/arm/mach-aspeed/ast2500/lowlevel_init.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) ASPEED Technology Inc.
+ */
+#include <asm/arch/scu_ast2500.h>
+
+/* registers for low level init */
+#define SCU_PROT_KEY 0x1e6e2000
+#define SCU_VGA_HANDSHAKE 0x1e6e2040
+#define SCU_HW_STRAP 0x1e6e2070
+#define SCU_HW_STRAP_CLR 0x1e6e207c
+#define WDT3_CTRL 0x1e78504c
+
+.global lowlevel_init
+lowlevel_init:
+
+ /* unlock SCU */
+ ldr r0, =SCU_PROT_KEY
+ ldr r1, =SCU_UNLOCK_VALUE
+ str r1, [r0]
+
+ /* set BMC FW as DRAM initializer */
+ ldr r0, =SCU_VGA_HANDSHAKE
+ ldr r1, [r0]
+ orr r1, #0x80
+ str r1, [r0]
+
+ /* set PERST# as LPC reset source if eSPI mode is enabled*/
+ ldr r0, =SCU_HW_STRAP
+ ldr r1, [r0]
+ tst r1, #(0x1 << 25)
+ ldrne r0, =SCU_HW_STRAP_CLR
+ movne r1, #(0x1 << 14)
+ strne r1, [r0]
+
+ /* disable WDT3 for SPI 3/4 bytes auto-detection */
+ ldr r0, =WDT3_CTRL
+ mov r1, #0x0
+ str r1, [r0]
+
+ mov pc, lr