diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/x86/include/asm/u-boot-x86.h | 1 | ||||
| -rw-r--r-- | arch/x86/lib/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/lib/pcat_timer.c | 69 | ||||
| -rw-r--r-- | arch/x86/lib/tsc_timer.c | 6 |
4 files changed, 10 insertions, 68 deletions
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index bec583feb6a..22e093427fd 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -41,6 +41,7 @@ typedef void (timer_fnc_t) (void); int register_timer_isr (timer_fnc_t *isr_func); unsigned long get_tbclk_mhz(void); void timer_set_base(uint64_t base); +int pcat_timer_init(void); /* Architecture specific - can be in arch/x86/cpu/, arch/x86/lib/, or $(BOARD)/ */ int dram_init_f(void); diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index c61447978dc..f66ad30741e 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -31,7 +31,7 @@ COBJS-y += gcc.o COBJS-y += init_helpers.o COBJS-y += interrupts.o COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o -COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o +COBJS-$(CONFIG_SYS_PCAT_TIMER) += pcat_timer.o COBJS-$(CONFIG_PCI) += pci_type1.o COBJS-y += relocate.o COBJS-y += physmem.o diff --git a/arch/x86/lib/pcat_timer.c b/arch/x86/lib/pcat_timer.c index b0b6637f3a9..1ca3eb9e918 100644 --- a/arch/x86/lib/pcat_timer.c +++ b/arch/x86/lib/pcat_timer.c @@ -24,83 +24,20 @@ #include <common.h> #include <asm/io.h> #include <asm/i8254.h> -#include <asm/ibmpc.h> -#include <asm/interrupt.h> -#define TIMER0_VALUE 0x04aa /* 1kHz 1.9318MHz / 1000 */ #define TIMER2_VALUE 0x0a8e /* 440Hz */ -static int timer_init_done; - -int timer_init(void) +int pcat_timer_init(void) { - /* initialize timer 0 and 2 - * - * Timer 0 is used to increment system_tick 1000 times/sec - * Timer 1 was used for DRAM refresh in early PC's - * Timer 2 is used to drive the speaker + /* + * initialize 2, used to drive the speaker * (to start a beep: write 3 to port 0x61, * to stop it again: write 0) */ - outb(PIT_CMD_CTR0 | PIT_CMD_BOTH | PIT_CMD_MODE2, - PIT_BASE + PIT_COMMAND); - outb(TIMER0_VALUE & 0xff, PIT_BASE + PIT_T0); - outb(TIMER0_VALUE >> 8, PIT_BASE + PIT_T0); - outb(PIT_CMD_CTR2 | PIT_CMD_BOTH | PIT_CMD_MODE3, PIT_BASE + PIT_COMMAND); outb(TIMER2_VALUE & 0xff, PIT_BASE + PIT_T2); outb(TIMER2_VALUE >> 8, PIT_BASE + PIT_T2); - irq_install_handler(0, timer_isr, NULL); - unmask_irq(0); - - timer_init_done = 1; - return 0; } - -static u16 read_pit(void) -{ - u8 low; - - outb(PIT_CMD_LATCH, PIT_BASE + PIT_COMMAND); - low = inb(PIT_BASE + PIT_T0); - - return (inb(PIT_BASE + PIT_T0) << 8) | low; -} - -/* this is not very exact */ -void __udelay(unsigned long usec) -{ - int counter; - int wraps; - - if (timer_init_done) { - counter = read_pit(); - wraps = usec / 1000; - usec = usec % 1000; - - usec *= 1194; - usec /= 1000; - usec += counter; - - while (usec > 1194) { - usec -= 1194; - wraps++; - } - - while (1) { - int new_count = read_pit(); - - if (((new_count < usec) && !wraps) || wraps < 0) - break; - - if (new_count > counter) - wraps--; - - counter = new_count; - } - } - -} diff --git a/arch/x86/lib/tsc_timer.c b/arch/x86/lib/tsc_timer.c index d931e5f5e01..c509801f9e8 100644 --- a/arch/x86/lib/tsc_timer.c +++ b/arch/x86/lib/tsc_timer.c @@ -98,6 +98,10 @@ void __udelay(unsigned long usec) int timer_init(void) { - /* Nothing to do here - the timer needs no init */ +#ifdef CONFIG_SYS_PCAT_TIMER + /* Set up the PCAT timer if required */ + pcat_timer_init(); +#endif + return 0; } |