diff options
Diffstat (limited to 'board/MAI/bios_emulator/glue.c')
-rw-r--r-- | board/MAI/bios_emulator/glue.c | 528 |
1 files changed, 528 insertions, 0 deletions
diff --git a/board/MAI/bios_emulator/glue.c b/board/MAI/bios_emulator/glue.c new file mode 100644 index 00000000000..b765ed54c98 --- /dev/null +++ b/board/MAI/bios_emulator/glue.c @@ -0,0 +1,528 @@ +#include <common.h> +#include <pci.h> +#include <74xx_7xx.h> + + +#ifdef DEBUG +#undef DEBUG +#endif + +#ifdef DEBUG +#define PRINTF(format, args...) _printf(format , ## args) +#else +#define PRINTF(format, argc...) +#endif + +static pci_dev_t to_pci(int bus, int devfn) +{ + return PCI_BDF(bus, (devfn>>3), devfn&3); +} + +int mypci_find_device(int vendor, int product, int index) +{ + return pci_find_device(vendor, product, index); +} + +int mypci_bus(int device) +{ + return PCI_BUS(device); +} + +int mypci_devfn(int device) +{ + return (PCI_DEV(device)<<3) | PCI_FUNC(device); +} + + +#define mypci_read_func(type, size) \ +type mypci_read_cfg_##size##(int bus, int devfn, int offset) \ +{ \ + type c; \ + pci_read_config_##size##(to_pci(bus, devfn), offset, &c); \ + return c; \ +} + +#define mypci_write_func(type, size) \ +void mypci_write_cfg_##size##(int bus, int devfn, int offset, int value) \ +{ \ + pci_write_config_##size##(to_pci(bus, devfn), offset, value); \ +} + +mypci_read_func(u8,byte); +mypci_read_func(u16,word); + +mypci_write_func(u8,byte); +mypci_write_func(u16,word); + +u32 mypci_read_cfg_long(int bus, int devfn, int offset) +{ + u32 c; + pci_read_config_dword(to_pci(bus, devfn), offset, &c); + return c; +} + +void mypci_write_cfg_long(int bus, int devfn, int offset, int value) +{ + pci_write_config_dword(to_pci(bus, devfn), offset, value); +} + +void _printf(const char *fmt, ...) +{ + va_list args; + char buf[CFG_PBSIZE]; + + va_start(args, fmt); + (void)vsprintf(buf, fmt, args); + va_end(args); + + printf(buf); +} + +char *_getenv(char *name) +{ + return getenv(name); +} + +unsigned long get_bar_size(pci_dev_t dev, int offset) +{ + u32 bar_back, bar_value; + + /* Save old BAR value */ + pci_read_config_dword(dev, offset, &bar_back); + + /* Write all 1's. */ + pci_write_config_dword(dev, offset, ~0); + + /* Now read back the relevant bits */ + pci_read_config_dword(dev, offset, &bar_value); + + /* Restore original value */ + pci_write_config_dword(dev, offset, bar_back); + + if (bar_value == 0) return 0xFFFFFFFF; /* This BAR is disabled */ + + if ((bar_value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) + { + /* This is a memory space BAR. Mask it out so we get the size of it */ + return ~(bar_value & PCI_BASE_ADDRESS_MEM_MASK) + 1; + } + + /* Not suitable */ + return 0xFFFFFFFF; +} + +void enable_compatibility_hole(void) +{ + u8 cfg; + pci_dev_t art = PCI_BDF(0,0,0); + + pci_read_config_byte(art, 0x54, &cfg); + /* cfg |= 0x08; */ + cfg |= 0x20; + pci_write_config_byte(art, 0x54, cfg); +} + +void disable_compatibility_hole(void) +{ + u8 cfg; + pci_dev_t art = PCI_BDF(0,0,0); + + pci_read_config_byte(art, 0x54, &cfg); + /* cfg &= ~0x08; */ + cfg &= ~0x20; + pci_write_config_byte(art, 0x54, cfg); +} + +void map_rom(pci_dev_t dev, u32 address) +{ + pci_write_config_dword(dev, PCI_ROM_ADDRESS, address|PCI_ROM_ADDRESS_ENABLE); +} + +void unmap_rom(pci_dev_t dev) +{ + pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0); +} + +void bat_map(u8 batnum, u32 address, u32 length) +{ + u32 temp = address; + address &= 0xFFFE0000; + temp &= 0x0001FFFF; + length = (length - 1 ) >> 17; + length <<= 2; + + switch (batnum) + { + case 0: + __asm volatile ("mtdbatu 0, %0" : : "r" (address | length | 3)); + __asm volatile ("mtdbatl 0, %0" : : "r" (address | 0x22)); + break; + case 1: + __asm volatile ("mtdbatu 1, %0" : : "r" (address | length | 3)); + __asm volatile ("mtdbatl 1, %0" : : "r" (address | 0x22)); + break; + case 2: + __asm volatile ("mtdbatu 2, %0" : : "r" (address | length | 3)); + __asm volatile ("mtdbatl 2, %0" : : "r" (address | 0x22)); + break; + case 3: + __asm volatile ("mtdbatu 3, %0" : : "r" (address | length | 3)); + __asm volatile ("mtdbatl 3, %0" : : "r" (address | 0x22)); + break; + } +} + +int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size); + +int attempt_map_rom(pci_dev_t dev, void *copy_address) +{ + u32 rom_size = 0; + u32 rom_address = 0; + u32 bar_size = 0; + u32 bar_backup = 0; + int i,j; + void *image = 0; + u32 image_size = 0; + int did_correct = 0; + u32 prefetch_addr = 0; + u32 prefetch_size = 0; + u32 prefetch_idx = 0; + + /* Get the size of the expansion rom */ + pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF); + pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size); + if ((rom_size & 0x01) == 0) + { + PRINTF("No ROM\n"); + return 0; + } + + rom_size &= 0xFFFFF800; + rom_size = (~rom_size)+1; + + PRINTF("ROM Size is %dK\n", rom_size/1024); + + /* + * Try to find a place for the ROM. We always attempt to use + * one of the card's bases for this, as this will be in any + * bridge's resource range as well as being free of conflicts + * with other cards. In a graphics card it is very unlikely + * that there won't be any base address that is large enough to + * hold the rom. + * + * FIXME: To work around this, theoretically the largest base + * could be used if none is found in the loop below. + */ + + for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4) + { + bar_size = get_bar_size(dev, i); + PRINTF("PCI_BASE_ADDRESS_%d is %dK large\n", + (i - PCI_BASE_ADDRESS_0)/4, + bar_size/1024); + if (bar_size != 0xFFFFFFFF && bar_size >= rom_size) + { + PRINTF("Found a match for rom size\n"); + pci_read_config_dword(dev, i, &rom_address); + rom_address &= 0xFFFFFFF0; + if (rom_address != 0 && rom_address != 0xFFFFFFF0) break; + } + } + + if (rom_address == 0 || rom_address == 0xFFFFFFF0) + { + PRINTF("No suitable rom address found\n"); + return 0; + } + + /* Disable the BAR */ + pci_read_config_dword(dev, i, &bar_backup); + pci_write_config_dword(dev, i, 0); + + /* Map ROM */ + pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE); + + /* Copy the rom to a place in the emulator space */ + PRINTF("Claiming BAT 2\n"); + bat_map(2, rom_address, rom_size); + /* show_bat_mapping(); */ + + if (0 == find_image(rom_address, rom_size, &image, &image_size)) + { + PRINTF("No x86 BIOS image found\n"); + return 0; + } + + PRINTF("Copying %ld bytes from 0x%lx to 0x%lx\n", (long)image_size, (long)image, (long)copy_address); + + /* memcpy(copy_address, rom_address, rom_size); */ + { + unsigned char *from = (unsigned char *)image; /* rom_address; */ + unsigned char *to = (unsigned char *)copy_address; + for (j=0; j<image_size /*rom_size*/; j++) + { + *to++ = *from++; + } + } + + PRINTF("Copy is done\n"); + + /* Unmap the ROM and restore the BAR */ + pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0); + pci_write_config_dword(dev, i, bar_backup); + + /* FIXME: */ + bat_map(2, 0x80000000, 256*1024*1024); + show_bat_mapping(); + + /* + * Since most cards can probably only do 16 bit IO addressing, we + * correct their IO base into an appropriate value. + * This should do for most. + */ + for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4) + { + unsigned long value; + pci_read_config_dword(dev, i, &value); + if (value & 0x01) /* IO */ + { + did_correct = 1; + pci_write_config_dword(dev, i, 0x1001); + break; + } + + if (value & PCI_BASE_ADDRESS_MEM_PREFETCH) + { + prefetch_idx = i; + prefetch_addr = value & PCI_BASE_ADDRESS_MEM_MASK; + prefetch_size = get_bar_size(dev, i); + } + } + + if (1) /* did_correct) */ + { + extern pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr); + int busnr = PCI_BUS(dev); + if (busnr) + { + pci_dev_t bridge; + PRINTF("Need to correct bridge device for IO range change\n"); + bridge = pci_find_bridge_for_bus(NULL, busnr); + if (bridge == PCI_ANY_ID) + { + PRINTF("Didn't find bridge. Hope that's OK\n"); + } + else + { + /* + * Set upper I/O base/limit to 0 + */ + pci_write_config_byte(bridge, 0x30, 0x00); + pci_write_config_byte(bridge, 0x31, 0x00); + pci_write_config_byte(bridge, 0x32, 0x00); + pci_write_config_byte(bridge, 0x33, 0x00); + if (did_correct) + { + /* + * set lower I/O base to 1000 + * That is, bits 0:3 are set to 0001 by default. + * bits 7:4 contain I/O address bits 15:12 + * all others are assumed 0. + */ + pci_write_config_byte(bridge, 0x1C, 0x11); + /* + * Set lower I/O limit to 1FFF + * That is, bits 0:3 are reserved and always 0000 + * Bits 7:4 contain I/O address bits 15:12 + * All others are assumed F. + */ + pci_write_config_byte(bridge, 0x1D, 0x10); + pci_write_config_byte(bridge, 0x0D, 0x20); + PRINTF("Corrected bridge resource range of bridge at %02x:%02x:%02x\n", + PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge)); + + } + else + { + /* + * This card doesn't have I/O, we disable I/O forwarding + */ + pci_write_config_byte(bridge, 0x1C, 0x11); + pci_write_config_byte(bridge, 0x1D, 0x00); + pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0); + pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0); + pci_write_config_dword(bridge, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO); + PRINTF("Disabled bridge resource range of bridge at %02x:%02x:%02x\n", + PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge)); + + } + } + /* + * Correct the prefetchable memory base, which is not set correctly by + * the U-Boot autoconfig stuff + */ + if (prefetch_idx) + { +/* PRINTF("Setting prefetchable range to %x, %x (%x and %x)\n", */ +/* prefetch_addr, prefetch_addr+prefetch_size, */ +/* prefetch_addr>>16, (prefetch_addr+prefetch_size)>>16); */ +/* pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, (prefetch_addr>>16)); */ +/* pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, (prefetch_addr+prefetch_size)>>16); */ + } + + pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, 0x1000); + pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, 0x0000); + + pci_write_config_byte(bridge, 0xD0, 0x0A); + pci_write_config_byte(bridge, 0xD3, 0x04); + + /* + * Set the interrupt pin to 0 + */ +#if 0 + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0); + pci_write_config_byte(dev, PCI_INTERRUPT_PIN, 0); +#endif + pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0); + pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0); + + } + } + + /* Finally, enable the card's IO and memory response */ + pci_write_config_dword(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO); + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0); + + return 1; +} + +int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size) +{ + int i = 0; + unsigned char *rom = (unsigned char *)rom_address; + /* if (*rom != 0x55 || *(rom+1) != 0xAA) return 0; // No bios rom this is, yes. */ + + for (;;) + { + unsigned short pci_data_offset = *(rom+0x18) + 256 * *(rom+0x19); + unsigned short pci_image_length = (*(rom+pci_data_offset+0x10) + 256 * *(rom+pci_data_offset+0x11)) * 512; + unsigned char pci_image_type = *(rom+pci_data_offset+0x14); + if (*rom != 0x55 || *(rom+1) != 0xAA) + { + PRINTF("Invalid header this is\n"); + return 0; + } + PRINTF("Image %i: Type %d (%s)\n", i++, pci_image_type, + pci_image_type==0 ? "x86" : + pci_image_type==1 ? "OpenFirmware" : + "Unknown"); + if (pci_image_type == 0) + { + *image = rom; + *image_size = pci_image_length; + return 1; + } + + if (*(rom+pci_data_offset+0x15) & 0x80) + { + PRINTF("LAST image encountered, no image found\n"); + return 0; + } + + rom += pci_image_length; + } +} + +void show_bat_mapping(void) +{ +#ifdef DEBUG + u32 dbat0u, dbat0l, ibat0u, ibat0l; + u32 dbat1u, dbat1l, ibat1u, ibat1l; + u32 dbat2u, dbat2l, ibat2u, ibat2l; + u32 dbat3u, dbat3l, ibat3u, ibat3l; + u32 msr, hid0, l2cr_reg; + + __asm volatile ("mfdbatu %0,0" : "=r" (dbat0u)); + __asm volatile ("mfdbatl %0,0" : "=r" (dbat0l)); + __asm volatile ("mfibatu %0,0" : "=r" (ibat0u)); + __asm volatile ("mfibatl %0,0" : "=r" (ibat0l)); + + __asm volatile ("mfdbatu %0,1" : "=r" (dbat1u)); + __asm volatile ("mfdbatl %0,1" : "=r" (dbat1l)); + __asm volatile ("mfibatu %0,1" : "=r" (ibat1u)); + __asm volatile ("mfibatl %0,1" : "=r" (ibat1l)); + + __asm volatile ("mfdbatu %0,2" : "=r" (dbat2u)); + __asm volatile ("mfdbatl %0,2" : "=r" (dbat2l)); + __asm volatile ("mfibatu %0,2" : "=r" (ibat2u)); + __asm volatile ("mfibatl %0,2" : "=r" (ibat2l)); + + __asm volatile ("mfdbatu %0,3" : "=r" (dbat3u)); + __asm volatile ("mfdbatl %0,3" : "=r" (dbat3l)); + __asm volatile ("mfibatu %0,3" : "=r" (ibat3u)); + __asm volatile ("mfibatl %0,3" : "=r" (ibat3l)); + + __asm volatile ("mfmsr %0" : "=r" (msr)); + __asm volatile ("mfspr %0,1008": "=r" (hid0)); + __asm volatile ("mfspr %0,1017": "=r" (l2cr_reg)); + + printf("dbat0u: %08x dbat0l: %08x ibat0u: %08x ibat0l: %08x\n", + dbat0u, dbat0l, ibat0u, ibat0l); + printf("dbat1u: %08x dbat1l: %08x ibat1u: %08x ibat1l: %08x\n", + dbat1u, dbat1l, ibat1u, ibat1l); + printf("dbat2u: %08x dbat2l: %08x ibat2u: %08x ibat2l: %08x\n", + dbat2u, dbat2l, ibat2u, ibat2l); + printf("dbat3u: %08x dbat3l: %08x ibat3u: %08x ibat3l: %08x\n", + dbat3u, dbat3l, ibat3u, ibat3l); + + printf("\nMSR: %08x HID0: %08x L2CR: %08x \n", msr,hid0, l2cr_reg); +#endif +} + + + +void remove_init_data(void) +{ + char *s; + u32 batl = ((CFG_SDRAM_BASE+0x100000) | BATL_PP_RW); + u32 batu =((CFG_SDRAM_BASE+0x100000) | BATU_BL_256M | BATU_VS | BATU_VP); +#if 0 /* already done in board_init_r() */ + void *data = (void *)(CFG_INIT_RAM_ADDR+CFG_INIT_DATA_OFFSET); + unsigned char data2[CFG_INIT_DATA_SIZE]; + + /* Make a copy of the data */ + memcpy(data2, data, CFG_INIT_DATA_SIZE); +#endif /* 0 */ + + /* Invalidate and disable data cache */ + invalidate_l1_data_cache(); + dcache_disable(); + +#if 0 + /* Copy to the real RAM address */ + memcpy(data, data2, CFG_INIT_DATA_SIZE); +#endif + + /*printf("Before ICache enable\n"); + show_bat_mapping();*/ + + __asm volatile ("isync \n" + "mtdbatu 2,%2 \n" + "mtdbatl 2,%2 \n" + "mtdbatu 1,%0 \n" + "mtdbatl 1,%1 \n" + "sync \n" + "isync \n" + : : "r" (batu), "r" (batl), "r" (0)); + + /* show_bat_mapping(); */ + s = getenv("x86_cache"); + + if (!s || (s && strcmp(s, "on")==0)) + { + icache_enable(); + dcache_enable(); + } + +} |