diff options
Diffstat (limited to 'board/cray/L1/flash.c')
-rw-r--r-- | board/cray/L1/flash.c | 451 |
1 files changed, 0 insertions, 451 deletions
diff --git a/board/cray/L1/flash.c b/board/cray/L1/flash.c deleted file mode 100644 index 96a1e474a57..00000000000 --- a/board/cray/L1/flash.c +++ /dev/null @@ -1,451 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com - */ - -/* - * Modified July 20, 2001 - * Strip down to support ONLY the AMD29F032B. - * Dave Updegraff - Cray, Inc. dave@cray.com - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -/* The flash chip we use... */ -#define AMD_ID_F032B 0x41 /* 29F032B ID 32 Mbit,64 64Kx8 sectors */ -#define FLASH_AM320B 0x0009 - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -#define ADDR0 0x5555 -#define ADDR1 0x2aaa -#define FLASH_WORD_SIZE unsigned char - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - /* Only one bank */ - if (CONFIG_SYS_MAX_FLASH_BANKS == 1) - { - /* Setup offsets */ - flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]); - -#if 0 - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - FLASH_BASE0_PRELIM, - FLASH_BASE0_PRELIM+monitor_flash_len-1, - &flash_info[0]); -#endif - size_b1 = 0 ; - flash_info[0].size = size_b0; - } - - return (size_b0 + size_b1); -} - - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM320B:printf ("AM29F032B (32 Mbit 64x64KB uniform sectors)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; k<size; k++) - { - if (*flash++ != 0xffffffff) - { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf ("\n "); - - printf (" %08lX%s%s", - info->start[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - FLASH_WORD_SIZE value; - ulong base = (ulong)addr; - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr; - - /* Write auto select command: read Manufacturer ID */ - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090; - - value = addr2[0]; - - switch (value) { - case (FLASH_WORD_SIZE)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - - switch (value) { - case (FLASH_WORD_SIZE)AMD_ID_F032B: - info->flash_id += FLASH_AM320B; - info->sector_count = 64; - info->size = 0x0400000; /* => 4 MB */ - break; - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); - info->protect[i] = addr2[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr2 = (FLASH_WORD_SIZE *)info->start[0]; - *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ - } - - return (info->size); -} - -int wait_for_DQ7(flash_info_t *info, int sect) -{ - ulong start, now, last; - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]); - - start = get_timer (0); - last = start; - while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - return 0; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (FLASH_WORD_SIZE *)(info->start[sect]); - printf("Erasing sector %p\n", addr2); - - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* reset to read mode */ - addr = (FLASH_WORD_SIZE *)info->start[0]; - addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data; - ulong start; - int flag; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((volatile FLASH_WORD_SIZE *)dest) & - (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++) - { - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != - (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} - -/*----------------------------------------------------------------------- - */ |