diff options
Diffstat (limited to 'board/freescale')
38 files changed, 1148 insertions, 332 deletions
diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c index 3d5404ee100..0abaffb3349 100644 --- a/board/freescale/common/ls102xa_stream_id.c +++ b/board/freescale/common/ls102xa_stream_id.c @@ -12,9 +12,12 @@ void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num) { void *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; int i; + u32 icid; - for (i = 0; i < num; i++) - out_be32((u32 *)(scfg + id[i].offset), id[i].stream_id); + for (i = 0; i < num; i++) { + icid = (id[i].stream_id & 0xff) << 24; + out_be32((u32 *)(scfg + id[i].offset), icid); + } } void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size) diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 113295f64a0..0db0ed66700 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -14,6 +14,13 @@ #include <i2c.h> #include "qixis.h" +#ifndef QIXIS_LBMAP_BRDCFG_REG +/* + * For consistency with existing platforms + */ +#define QIXIS_LBMAP_BRDCFG_REG 0x00 +#endif + #ifdef CONFIG_SYS_I2C_FPGA_ADDR u8 qixis_read_i2c(unsigned int reg) { @@ -27,6 +34,7 @@ void qixis_write_i2c(unsigned int reg, u8 value) } #endif +#ifdef QIXIS_BASE u8 qixis_read(unsigned int reg) { void *p = (void *)QIXIS_BASE; @@ -40,6 +48,7 @@ void qixis_write(unsigned int reg, u8 value) out_8(p + reg, value); } +#endif u16 qixis_read_minor(void) { @@ -142,9 +151,9 @@ static void __maybe_unused set_lbmap(int lbmap) { u8 reg; - reg = QIXIS_READ(brdcfg[0]); + reg = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]); reg = (reg & ~QIXIS_LBMAP_MASK) | lbmap; - QIXIS_WRITE(brdcfg[0], reg); + QIXIS_WRITE(brdcfg[QIXIS_LBMAP_BRDCFG_REG], reg); } static void __maybe_unused set_rcw_src(int rcw_src) diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig new file mode 100644 index 00000000000..a34521cf795 --- /dev/null +++ b/board/freescale/ls1012afrdm/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LS1012AFRDM + +config SYS_BOARD + default "ls1012afrdm" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1012afrdm" + +endif diff --git a/board/freescale/ls1012afrdm/MAINTAINERS b/board/freescale/ls1012afrdm/MAINTAINERS new file mode 100644 index 00000000000..842f86f8619 --- /dev/null +++ b/board/freescale/ls1012afrdm/MAINTAINERS @@ -0,0 +1,6 @@ +LS1012AFRDM BOARD +M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> +S: Maintained +F: board/freescale/ls1012afrdm/ +F: include/configs/ls1012afrdm.h +F: configs/ls1012afrdm_qspi_defconfig diff --git a/board/freescale/ls1012afrdm/Makefile b/board/freescale/ls1012afrdm/Makefile new file mode 100644 index 00000000000..dbfa2cea383 --- /dev/null +++ b/board/freescale/ls1012afrdm/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1012afrdm.o diff --git a/board/freescale/ls1012afrdm/README b/board/freescale/ls1012afrdm/README new file mode 100644 index 00000000000..181c4615a87 --- /dev/null +++ b/board/freescale/ls1012afrdm/README @@ -0,0 +1,58 @@ +Overview +-------- +QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development +platform, with a complete debugging environment. The LS1012AFRDM board +supports the QorIQ LS1012A processor and is optimized to support the +high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. + +LS1012A SoC Overview +-------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A +SoC overview. + + LS1012AFRDM board Overview + ----------------------- + - SERDES Connections, 2 lanes supportingspeeds upto 1 Gbit/s + - 2 SGMII 1G PHYs + - DDR Controller + - 4 Gb DDR3L SDRAM memory, running at data rates up to 1 GT/s + operating at 1.35 V + - QSPI + - Onboard 512 Mbit QSPI flash memory running at speed up + to 108/54 MHz + - One high-speed USB 2.0/3.0 port, one USB 2.0 port + - USB 2.0/3.0 port is configured as On-The-Go (OTG) with a + Micro-AB connector. + - USB 2.0 port is a debug port (CMSIS DAP) and is configured + as a Micro-AB device. + - I2C controller + - One I2C bus with connectivity to Arduino headers + - UART + - UART (Console): UART1 (Without flow control) for console + - ARM JTAG support + - ARM Cortex® 10-pin JTAG connector for LS1012A + - CMSIS DAP through K20 microcontroller + - SAI Audio interface + - One SAI port, SAI 2 with full duplex support + - Clocks + - 25 MHz crystal for LS1012A + - 8 MHz Crystal for K20 + - 24 MHz for SC16IS740IPW SPI to Dual UART bridge + - Power Supplies + - 5 V input supply from USB + - 0.9 V, 1.35 V, and 1.8 V for VDD/Core, DDR, I/O, and + other board interfaces + +Booting Options +--------------- +QSPI Flash 1 + +QSPI flash map +-------------- +Images | Size |QSPI Flash Address +------------------------------------------ +RCW + PBI | 1MB | 0x4000_0000 +U-boot | 1MB | 0x4010_0000 +U-boot Env | 1MB | 0x4020_0000 +PPA FIT image | 2MB | 0x4050_0000 +Linux ITB | ~53MB | 0x40A0_0000 diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c new file mode 100644 index 00000000000..a94a458f53d --- /dev/null +++ b/board/freescale/ls1012afrdm/ls1012afrdm.c @@ -0,0 +1,192 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/fsl_serdes.h> +#include <asm/arch/soc.h> +#include <hwconfig.h> +#include <fsl_csu.h> +#include <environment.h> +#include <fsl_mmdc.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits) +{ + int timeout = 1000; + + out_be32(ptr, value); + + while (in_be32(ptr) & bits) { + udelay(100); + timeout--; + } + if (timeout <= 0) + puts("Error: wait for clear timeout.\n"); +} + +int checkboard(void) +{ + puts("Board: LS1012AFRDM "); + + return 0; +} + +void mmdc_init(void) +{ + struct mmdc_p_regs *mmdc = + (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR; + + out_be32(&mmdc->mdscr, CONFIGURATION_REQ); + + /* configure timing parms */ + out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING); + out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0); + out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1); + out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2); + + /* other parms */ + out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC); + out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT); + out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY); + out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL); + + /* out of reset delays */ + out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY); + + /* physical parms */ + out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1); + out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION); + + /* Enable MMDC */ + out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2); + + /* dram init sequence: update MRs */ + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2)); + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) | + CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0)); + + /* dram init sequence: ZQCL */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0)); + set_wait_for_bits_clear(&mmdc->mpzqhwctrl, + CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL, + FORCE_ZQ_AUTO_CALIBRATION); + + /* Calibrations now: wr lvl */ + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) | + CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL)); + set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN); + + mdelay(1); + + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, CONFIGURATION_REQ); + + mdelay(1); + + /* Calibrations now: Read DQS gating calibration */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3)); + out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN); + out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG); + set_wait_for_bits_clear(&mmdc->mpdgctrl0, + AUTO_RD_DQS_GATING_CALIBRATION_EN, + AUTO_RD_DQS_GATING_CALIBRATION_EN); + + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + + /* Calibrations now: Read calibration */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3)); + out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN); + set_wait_for_bits_clear(&mmdc->mprddlhwctl, + AUTO_RD_CALIBRATION_EN, + AUTO_RD_CALIBRATION_EN); + + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + + /* PD, SR */ + out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL); + out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT); + + /* refresh scheme */ + set_wait_for_bits_clear(&mmdc->mdref, + CONFIG_SYS_MMDC_CORE_REFRESH_CTL, + START_REFRESH); + + /* disable CON_REQ */ + out_be32(&mmdc->mdscr, DISABLE_CFG_REQ); +} + +int dram_init(void) +{ + mmdc_init(); + + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +int board_init(void) +{ + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + /* + * Set CCI-400 control override register to enable barrier + * transaction + */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); + +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + +#ifdef CONFIG_LAYERSCAPE_NS_ACCESS + enable_layerscape_ns_access(); +#endif + + return 0; +} + +int ft_board_setup(void *blob, bd_t *bd) +{ + arch_fixup_fdt(blob); + + ft_cpu_setup(blob, bd); + + return 0; +} diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig new file mode 100644 index 00000000000..1257ec8d06e --- /dev/null +++ b/board/freescale/ls1012aqds/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LS1012AQDS + +config SYS_BOARD + default "ls1012aqds" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1012aqds" + +endif diff --git a/board/freescale/ls1012aqds/MAINTAINERS b/board/freescale/ls1012aqds/MAINTAINERS new file mode 100644 index 00000000000..27c4affd30b --- /dev/null +++ b/board/freescale/ls1012aqds/MAINTAINERS @@ -0,0 +1,6 @@ +LS1012AQDS BOARD +M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> +S: Maintained +F: board/freescale/ls1012aqds/ +F: include/configs/ls1012aqds.h +F: configs/ls1012aqds_qspi_defconfig diff --git a/board/freescale/ls1012aqds/Makefile b/board/freescale/ls1012aqds/Makefile new file mode 100644 index 00000000000..0b813f97848 --- /dev/null +++ b/board/freescale/ls1012aqds/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1012aqds.o diff --git a/board/freescale/ls1012aqds/README b/board/freescale/ls1012aqds/README new file mode 100644 index 00000000000..dee4b302c14 --- /dev/null +++ b/board/freescale/ls1012aqds/README @@ -0,0 +1,59 @@ +Overview +-------- +QorIQ LS1012A Development System (LS1012AQDS) is a high-performance +development platform, with a complete debugging environment. +The LS1012AQDS board supports the QorIQ LS1012A processor and is +optimized to support the high-bandwidth DDR3L memory and +a full complement of high-speed SerDes ports. + +LS1012A SoC Overview +-------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A +SoC overview. + +LS1012AQDS board Overview +----------------------- + - SERDES Connections, 4 lanes supporting: + - PCI Express - 3.0 + - SGMII, SGMII 2.5 + - SATA 3.0 + - DDR Controller + - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s + - QSPI Controller + - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select + signals to QSPI NOR flash memory (2 virtual banks) and the QSPI + emulator + - USB 3.0 + - One USB 3.0 controller with integrated PHY + - One high-speed USB 3.0 port + - USB 2.0 + - One USB 2.0 controller with ULPI interface + - Two enhanced secure digital host controllers: + - SDHC1 controller can be connected to onboard SDHC connector + - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices + - 2 I2C controllers + - One SATA onboard connectors + - UART + - 5 SAI + - One SAI port with audio codec SGTL5000: + • Provides MIC bias + • Provides headphone and line output + - One SAI port terminated at 2x6 header + - Three SAI Tx/Rx ports terminated at 2x3 headers + - ARM JTAG support + +Booting Options +--------------- +a) QSPI Flash Emu Boot +b) QSPI Flash 1 +c) QSPI Flash 2 + +QSPI flash map +-------------- +Images | Size |QSPI Flash Address +------------------------------------------ +RCW + PBI | 1MB | 0x4000_0000 +U-boot | 1MB | 0x4010_0000 +U-boot Env | 1MB | 0x4020_0000 +PPA FIT image | 2MB | 0x4050_0000 +Linux ITB | ~53MB | 0x40A0_0000 diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c new file mode 100644 index 00000000000..71eea82a035 --- /dev/null +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -0,0 +1,234 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <fdt_support.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/fsl_serdes.h> +#include <asm/arch/fdt.h> +#include <asm/arch/soc.h> +#include <ahci.h> +#include <hwconfig.h> +#include <mmc.h> +#include <scsi.h> +#include <fm_eth.h> +#include <fsl_csu.h> +#include <fsl_esdhc.h> +#include <fsl_mmdc.h> +#include <spl.h> +#include <netdev.h> + +#include "../common/qixis.h" +#include "ls1012aqds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits) +{ + int timeout = 1000; + + out_be32(ptr, value); + + while (in_be32(ptr) & bits) { + udelay(100); + timeout--; + } + if (timeout <= 0) + puts("Error: wait for clear timeout.\n"); +} + +int checkboard(void) +{ + char buf[64]; + u8 sw; + + sw = QIXIS_READ(arch); + printf("Board Arch: V%d, ", sw >> 4); + printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1); + + sw = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]); + + if (sw & QIXIS_LBMAP_ALTBANK) + printf("flash: 2\n"); + else + printf("flash: 1\n"); + + printf("FPGA: v%d (%s), build %d", + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); + + /* the timestamp string contains "\n" at the end */ + printf(" on %s", qixis_read_time(buf)); + return 0; +} + +void mmdc_init(void) +{ + struct mmdc_p_regs *mmdc = + (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR; + + out_be32(&mmdc->mdscr, CONFIGURATION_REQ); + + /* configure timing parms */ + out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING); + out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0); + out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1); + out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2); + + /* other parms */ + out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC); + out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT); + out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY); + out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL); + + /* out of reset delays */ + out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY); + + /* physical parms */ + out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1); + out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION); + + /* Enable MMDC */ + out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2); + + /* dram init sequence: update MRs */ + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2)); + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) | + CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0)); + + /* dram init sequence: ZQCL */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0)); + set_wait_for_bits_clear(&mmdc->mpzqhwctrl, + CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL, + FORCE_ZQ_AUTO_CALIBRATION); + + /* Calibrations now: wr lvl */ + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) | + CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL)); + set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN); + + mdelay(1); + + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, CONFIGURATION_REQ); + + mdelay(1); + + /* Calibrations now: Read DQS gating calibration */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3)); + out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN); + out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG); + set_wait_for_bits_clear(&mmdc->mpdgctrl0, + AUTO_RD_DQS_GATING_CALIBRATION_EN, + AUTO_RD_DQS_GATING_CALIBRATION_EN); + + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + + /* Calibrations now: Read calibration */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3)); + out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN); + set_wait_for_bits_clear(&mmdc->mprddlhwctl, + AUTO_RD_CALIBRATION_EN, + AUTO_RD_CALIBRATION_EN); + + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + + /* PD, SR */ + out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL); + out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT); + + /* refresh scheme */ + set_wait_for_bits_clear(&mmdc->mdref, + CONFIG_SYS_MMDC_CORE_REFRESH_CTL, + START_REFRESH); + + /* disable CON_REQ */ + out_be32(&mmdc->mdscr, DISABLE_CFG_REQ); +} + +int dram_init(void) +{ + mmdc_init(); + + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + u8 mux_sdhc_cd = 0x80; + + i2c_set_bus_num(0); + + i2c_write(CONFIG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1); + return 0; +} +#endif + +int board_init(void) +{ + struct ccsr_cci400 *cci = (struct ccsr_cci400 *) + CONFIG_SYS_CCI400_ADDR; + + /* Set CCI-400 control override register to enable barrier + * transaction */ + out_le32(&cci->ctrl_ord, + CCI400_CTRLORD_EN_BARRIER); + +#ifdef CONFIG_LAYERSCAPE_NS_ACCESS + enable_layerscape_ns_access(); +#endif + +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + arch_fixup_fdt(blob); + + ft_cpu_setup(blob, bd); + + return 0; +} +#endif diff --git a/board/freescale/ls1012aqds/ls1012aqds_qixis.h b/board/freescale/ls1012aqds/ls1012aqds_qixis.h new file mode 100644 index 00000000000..584f604aa86 --- /dev/null +++ b/board/freescale/ls1012aqds/ls1012aqds_qixis.h @@ -0,0 +1,35 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1043AQDS_QIXIS_H__ +#define __LS1043AQDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for LS1043AQDS */ + +/* BRDCFG4[4:7] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xe0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +/* BRDCFG2 - SD clock*/ +#define QIXIS_SDCLK1_100 0x0 +#define QIXIS_SDCLK1_125 0x1 +#define QIXIS_SDCLK1_165 0x2 +#define QIXIS_SDCLK1_100_SP 0x3 + +#endif diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig new file mode 100644 index 00000000000..3f67c2841f5 --- /dev/null +++ b/board/freescale/ls1012ardb/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LS1012ARDB + +config SYS_BOARD + default "ls1012ardb" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1012ardb" + +endif diff --git a/board/freescale/ls1012ardb/MAINTAINERS b/board/freescale/ls1012ardb/MAINTAINERS new file mode 100644 index 00000000000..79a2a7dd247 --- /dev/null +++ b/board/freescale/ls1012ardb/MAINTAINERS @@ -0,0 +1,6 @@ +LS1012ARDB BOARD +M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> +S: Maintained +F: board/freescale/ls1012ardb/ +F: include/configs/ls1012ardb.h +F: configs/ls1012ardb_qspi_defconfig diff --git a/board/freescale/ls1012ardb/Makefile b/board/freescale/ls1012ardb/Makefile new file mode 100644 index 00000000000..05fa9d9c5b2 --- /dev/null +++ b/board/freescale/ls1012ardb/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1012ardb.o diff --git a/board/freescale/ls1012ardb/README b/board/freescale/ls1012ardb/README new file mode 100644 index 00000000000..453b4329155 --- /dev/null +++ b/board/freescale/ls1012ardb/README @@ -0,0 +1,54 @@ +Overview +-------- +QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance +development platform, with a complete debugging environment. +The LS1012ARDB board supports the QorIQ LS1012A processor and is +optimized to support the high-bandwidth DDR3L memory and +a full complement of high-speed SerDes ports. + +LS1012A SoC Overview +-------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A +SoC overview. + +LS1012ARDB board Overview +----------------------- + - SERDES Connections, 4 lanes supporting: + - PCI Express - 3.0 + - SGMII, SGMII 2.5 + - SATA 3.0 + - DDR Controller + - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s + -QSPI: A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select + signals to + - QSPI NOR flash memory (2 virtual banks) + - the QSPI emulator.s + - USB 3.0 + - one high-speed USB 2.0/3.0 port. + - Two enhanced secure digital host controllers: + - SDHC1 controller can be connected to onboard SDHC connector + - SDHC2 controller: Three dual 1:4 mux/demux devices, + 74CBTLV3253DS (U30, U31, U33) drive the SDHC2 signals to eMMC, + SDIO WiFi, SPI, and Ardiuno shield + - 2 I2C controllers + - One SATA onboard connectors + - UART + - The LS1012A processor consists of two UART controllers, + out of which only UART1 is used on RDB. + - ARM JTAG support + +Booting Options +--------------- +a) QSPI Flash Emu Boot +b) QSPI Flash 1 +c) QSPI Flash 2 + +QSPI flash map +-------------- +Images | Size |QSPI Flash Address +------------------------------------------ +RCW + PBI | 1MB | 0x4000_0000 +U-boot | 1MB | 0x4010_0000 +U-boot Env | 1MB | 0x4020_0000 +PPA FIT image | 2MB | 0x4050_0000 +Linux ITB | ~53MB | 0x40A0_0000 diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c new file mode 100644 index 00000000000..f69768d24e9 --- /dev/null +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -0,0 +1,224 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/fsl_serdes.h> +#include <asm/arch/soc.h> +#include <hwconfig.h> +#include <ahci.h> +#include <mmc.h> +#include <scsi.h> +#include <fsl_csu.h> +#include <fsl_esdhc.h> +#include <environment.h> +#include <fsl_mmdc.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits) +{ + int timeout = 1000; + + out_be32(ptr, value); + + while (in_be32(ptr) & bits) { + udelay(100); + timeout--; + } + if (timeout <= 0) + puts("Error: wait for clear timeout.\n"); +} + +int checkboard(void) +{ + u8 in1; + + puts("Board: LS1012ARDB "); + + /* Initialize i2c early for Serial flash bank information */ + i2c_set_bus_num(0); + + if (i2c_read(I2C_MUX_IO1_ADDR, 1, 1, &in1, 1) < 0) { + printf("Error reading i2c boot information!\n"); + return 0; /* Don't want to hang() on this error */ + } + + puts("Version"); + if ((in1 & (~__SW_REV_MASK)) == __SW_REV_A) + puts(": RevA"); + else if ((in1 & (~__SW_REV_MASK)) == __SW_REV_B) + puts(": RevB"); + else + puts(": unknown"); + + printf(", boot from QSPI"); + if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_EMU) + puts(": emu\n"); + else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK1) + puts(": bank1\n"); + else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK2) + puts(": bank2\n"); + else + puts("unknown\n"); + + return 0; +} + +void mmdc_init(void) +{ + struct mmdc_p_regs *mmdc = + (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR; + + out_be32(&mmdc->mdscr, CONFIGURATION_REQ); + + /* configure timing parms */ + out_be32(&mmdc->mdotc, CONFIG_SYS_MMDC_CORE_ODT_TIMING); + out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0); + out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1); + out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2); + + /* other parms */ + out_be32(&mmdc->mdmisc, CONFIG_SYS_MMDC_CORE_MISC); + out_be32(&mmdc->mpmur0, CONFIG_SYS_MMDC_PHY_MEASURE_UNIT); + out_be32(&mmdc->mdrwd, CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY); + out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL); + + /* out of reset delays */ + out_be32(&mmdc->mdor, CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY); + + /* physical parms */ + out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1); + out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION); + + /* Enable MMDC */ + out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2); + + /* dram init sequence: update MRs */ + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2)); + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) | + CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0)); + + /* dram init sequence: ZQCL */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0)); + set_wait_for_bits_clear(&mmdc->mpzqhwctrl, + CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL, + FORCE_ZQ_AUTO_CALIBRATION); + + /* Calibrations now: wr lvl */ + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) | + CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL)); + set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN); + + mdelay(1); + + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1)); + out_be32(&mmdc->mdscr, CONFIGURATION_REQ); + + mdelay(1); + + /* Calibrations now: Read DQS gating calibration */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3)); + out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN); + out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG); + set_wait_for_bits_clear(&mmdc->mpdgctrl0, + AUTO_RD_DQS_GATING_CALIBRATION_EN, + AUTO_RD_DQS_GATING_CALIBRATION_EN); + + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + + /* Calibrations now: Read calibration */ + out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ | + CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0)); + out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ | + CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3)); + out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN); + set_wait_for_bits_clear(&mmdc->mprddlhwctl, + AUTO_RD_CALIBRATION_EN, + AUTO_RD_CALIBRATION_EN); + + out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG | + CMD_BANK_ADDR_3)); + + /* PD, SR */ + out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL); + out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT); + + /* refresh scheme */ + set_wait_for_bits_clear(&mmdc->mdref, + CONFIG_SYS_MMDC_CORE_REFRESH_CTL, + START_REFRESH); + + /* disable CON_REQ */ + out_be32(&mmdc->mdscr, DISABLE_CFG_REQ); +} + +int dram_init(void) +{ + mmdc_init(); + + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +int board_init(void) +{ + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + /* + * Set CCI-400 control override register to enable barrier + * transaction + */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); + +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + +#ifdef CONFIG_LAYERSCAPE_NS_ACCESS + enable_layerscape_ns_access(); +#endif + + return 0; +} + +int ft_board_setup(void *blob, bd_t *bd) +{ + arch_fixup_fdt(blob); + + ft_cpu_setup(blob, bd); + + return 0; +} diff --git a/board/freescale/ls1021aqds/ddr.h b/board/freescale/ls1021aqds/ddr.h index f819c99dbaa..b39b561dc1a 100644 --- a/board/freescale/ls1021aqds/ddr.h +++ b/board/freescale/ls1021aqds/ddr.h @@ -31,21 +31,21 @@ static const struct board_specific_parameters udimm0[] = { * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ #ifdef CONFIG_SYS_FSL_DDR4 - {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, - {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,}, - {1, 1666, 0, 4, 8, 0x090A0B0B, 0x0C0D0E0C,}, - {1, 1900, 0, 4, 9, 0x0A0B0C0B, 0x0D0E0F0D,}, - {1, 2200, 0, 4, 10, 0x0B0C0D0C, 0x0E0F110E,}, + {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 1900, 0, 8, 6, 0x08080A0C, 0x0D0E0F0A,}, + {1, 1666, 0, 8, 8, 0x090A0B0B, 0x0C0D0E0C,}, + {1, 1900, 0, 8, 9, 0x0A0B0C0B, 0x0D0E0F0D,}, + {1, 2200, 0, 8, 10, 0x0B0C0D0C, 0x0E0F110E,}, #elif defined(CONFIG_SYS_FSL_DDR3) - {1, 833, 1, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, - {1, 1350, 1, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, - {1, 833, 2, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, - {1, 1350, 2, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, - {2, 833, 4, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, - {2, 1350, 4, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, - {2, 1350, 0, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, - {2, 1666, 4, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, - {2, 1666, 0, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, + {1, 833, 1, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {1, 1350, 1, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {1, 833, 2, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {1, 1350, 2, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 833, 4, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {2, 1350, 4, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 1350, 0, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 1666, 4, 8, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, + {2, 1666, 0, 8, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, #else #error DDR type not defined #endif diff --git a/board/freescale/ls1043aqds/README b/board/freescale/ls1043aqds/README index a6fd7a35f54..913537d4519 100644 --- a/board/freescale/ls1043aqds/README +++ b/board/freescale/ls1043aqds/README @@ -8,41 +8,8 @@ debugging environment. LS1043A SoC Overview -------------------- -The LS1043A integrated multicore processor combines four ARM Cortex-A53 -processor cores with datapath acceleration optimized for L2/3 packet -processing, single pass security offload and robust traffic management -and quality of service. - -The LS1043A SoC includes the following function and features: - - Four 64-bit ARM Cortex-A53 CPUs - - 1 MB unified L2 Cache - - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving - support - - Data Path Acceleration Architecture (DPAA) incorporating acceleration the - the following functions: - - Packet parsing, classification, and distribution (FMan) - - Queue management for scheduling, packet sequencing, and congestion - management (QMan) - - Hardware buffer management for buffer allocation and de-allocation (BMan) - - Cryptography acceleration (SEC) - - Ethernet interfaces by FMan - - Up to 1 x XFI supporting 10G interface - - Up to 1 x QSGMII - - Up to 4 x SGMII supporting 1000Mbps - - Up to 2 x SGMII supporting 2500Mbps - - Up to 2 x RGMII supporting 1000Mbps - - High-speed peripheral interfaces - - Three PCIe 2.0 controllers, one supporting x4 operation - - One serial ATA (SATA 3.0) controllers - - Additional peripheral interfaces - - Three high-speed USB 3.0 controllers with integrated PHY - - Enhanced secure digital host controller (eSDXC/eMMC) - - Quad Serial Peripheral Interface (QSPI) Controller - - Serial peripheral interface (SPI) controller - - Four I2C controllers - - Two DUARTs - - Integrated flash controller supporting NAND and NOR flash - - QorIQ platform's trust architecture 2.1 +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A +SoC overview. LS1043AQDS board Overview ----------------------- diff --git a/board/freescale/ls1043aqds/ddr.h b/board/freescale/ls1043aqds/ddr.h index d3f40822b7c..ad709ba216b 100644 --- a/board/freescale/ls1043aqds/ddr.h +++ b/board/freescale/ls1043aqds/ddr.h @@ -34,21 +34,21 @@ static const struct board_specific_parameters udimm0[] = { * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ #ifdef CONFIG_SYS_FSL_DDR4 - {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, - {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,}, - {1, 1666, 0, 4, 6, 0x0708090B, 0x0C0D0E0A,}, - {1, 1900, 0, 4, 9, 0x0A0B0C0B, 0x0D0E0F0D,}, - {1, 2200, 0, 4, 10, 0x0B0C0D0C, 0x0E0F110E,}, + {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 1900, 0, 8, 6, 0x08080A0C, 0x0D0E0F0A,}, + {1, 1666, 0, 8, 6, 0x0708090B, 0x0C0D0E0A,}, + {1, 1900, 0, 8, 9, 0x0A0B0C0B, 0x0D0E0F0D,}, + {1, 2200, 0, 8, 10, 0x0B0C0D0C, 0x0E0F110E,}, #elif defined(CONFIG_SYS_FSL_DDR3) - {1, 833, 1, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, - {1, 1350, 1, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, - {1, 833, 2, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, - {1, 1350, 2, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, - {2, 833, 4, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, - {2, 1350, 4, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, - {2, 1350, 0, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, - {2, 1666, 4, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, - {2, 1666, 0, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, + {1, 833, 1, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {1, 1350, 1, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {1, 833, 2, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {1, 1350, 2, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 833, 4, 12, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {2, 1350, 4, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 1350, 0, 12, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 1666, 4, 8, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, + {2, 1666, 0, 8, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, #else #error DDR type not defined #endif diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index ca393e862d7..7e47ef0d82b 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -238,8 +238,8 @@ int board_early_init_f(void) out_be32(&scfg->rcwpmuxcr0, 0x3333); out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); usb_pwrfault = - (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB3_SHIFT) | - (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB2_SHIFT) | + (SCFG_USBPWRFAULT_DEDICATED << SCFG_USBPWRFAULT_USB3_SHIFT) | + (SCFG_USBPWRFAULT_DEDICATED << SCFG_USBPWRFAULT_USB2_SHIFT) | (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB1_SHIFT); out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); #endif diff --git a/board/freescale/ls1043ardb/README b/board/freescale/ls1043ardb/README index 0556e73b3ae..709ddbbef31 100644 --- a/board/freescale/ls1043ardb/README +++ b/board/freescale/ls1043ardb/README @@ -8,41 +8,8 @@ debugging environment. The LS1043A RDB is lead-free and RoHS-compliant. LS1043A SoC Overview -------------------- -The LS1043A integrated multicore processor combines four ARM Cortex-A53 -processor cores with datapath acceleration optimized for L2/3 packet -processing, single pass security offload and robust traffic management -and quality of service. - -The LS1043A SoC includes the following function and features: - - Four 64-bit ARM Cortex-A53 CPUs - - 1 MB unified L2 Cache - - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving - support - - Data Path Acceleration Architecture (DPAA) incorporating acceleration the - the following functions: - - Packet parsing, classification, and distribution (FMan) - - Queue management for scheduling, packet sequencing, and congestion - management (QMan) - - Hardware buffer management for buffer allocation and de-allocation (BMan) - - Cryptography acceleration (SEC) - - Ethernet interfaces by FMan - - Up to 1 x XFI supporting 10G interface - - Up to 1 x QSGMII - - Up to 4 x SGMII supporting 1000Mbps - - Up to 2 x SGMII supporting 2500Mbps - - Up to 2 x RGMII supporting 1000Mbps - - High-speed peripheral interfaces - - Three PCIe 2.0 controllers, one supporting x4 operation - - One serial ATA (SATA 3.0) controllers - - Additional peripheral interfaces - - Three high-speed USB 3.0 controllers with integrated PHY - - Enhanced secure digital host controller (eSDXC/eMMC) - - Quad Serial Peripheral Interface (QSPI) Controller - - Serial peripheral interface (SPI) controller - - Four I2C controllers - - Two DUARTs - - Integrated flash controller supporting NAND and NOR flash - - QorIQ platform's trust architecture 2.1 +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A +SoC overview. LS1043ARDB board Overview ----------------------- diff --git a/board/freescale/ls1043ardb/ddr.h b/board/freescale/ls1043ardb/ddr.h index 8ca166b3ac9..a77ddf3d240 100644 --- a/board/freescale/ls1043ardb/ddr.h +++ b/board/freescale/ls1043ardb/ddr.h @@ -34,9 +34,9 @@ static const struct board_specific_parameters udimm0[] = { * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ #ifdef CONFIG_SYS_FSL_DDR4 - {1, 1666, 0, 6, 7, 0x07090800, 0x00000000,}, - {1, 1900, 0, 6, 7, 0x07090800, 0x00000000,}, - {1, 2200, 0, 6, 7, 0x07090800, 0x00000000,}, + {1, 1666, 0, 12, 7, 0x07090800, 0x00000000,}, + {1, 1900, 0, 12, 7, 0x07090800, 0x00000000,}, + {1, 2200, 0, 12, 7, 0x07090800, 0x00000000,}, #endif {} }; diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README index 6ddad92f2cf..5c98866712a 100644 --- a/board/freescale/ls2080aqds/README +++ b/board/freescale/ls2080aqds/README @@ -7,48 +7,9 @@ SW development platform for the Freescale LS2080A processor series, with a complete debugging environment. LS2080A SoC Overview ------------------- -The LS2080A integrated multicore processor combines eight ARM Cortex-A57 -processor cores with high-performance data path acceleration logic and network -and peripheral bus interfaces required for networking, telecom/datacom, -wireless infrastructure, and mil/aerospace applications. - -The LS2080A SoC includes the following function and features: - - - Eight 64-bit ARM Cortex-A57 CPUs - - 1 MB platform cache with ECC - - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support - - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by - the AIOP - - Data path acceleration architecture (DPAA2) incorporating acceleration for - the following functions: - - Packet parsing, classification, and distribution (WRIOP) - - Queue and Hardware buffer management for scheduling, packet sequencing, and - congestion management, buffer allocation and de-allocation (QBMan) - - Cryptography acceleration (SEC) at up to 10 Gbps - - RegEx pattern matching acceleration (PME) at up to 10 Gbps - - Decompression/compression acceleration (DCE) at up to 20 Gbps - - Accelerated I/O processing (AIOP) at up to 20 Gbps - - QDMA engine - - 16 SerDes lanes at up to 10.3125 GHz - - Ethernet interfaces - - Up to eight 10 Gbps Ethernet MACs - - Up to eight 1 / 2.5 Gbps Ethernet MACs - - High-speed peripheral interfaces - - Four PCIe 3.0 controllers, one supporting SR-IOV - - Additional peripheral interfaces - - Two serial ATA (SATA 3.0) controllers - - Two high-speed USB 3.0 controllers with integrated PHY - - Enhanced secure digital host controller (eSDXC/eMMC) - - Serial peripheral interface (SPI) controller - - Quad Serial Peripheral Interface (QSPI) Controller - - Four I2C controllers - - Two DUARTs - - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash - - Support for hardware virtualization and partitioning enforcement - - QorIQ platform's trust architecture 3.0 - - Service processor (SP) provides pre-boot initialization and secure-boot - capabilities +-------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A +SoC overview. LS2080AQDS board Overview ----------------------- diff --git a/board/freescale/ls2080aqds/ddr.h b/board/freescale/ls2080aqds/ddr.h index b76ea61ba0b..eba62c33b20 100644 --- a/board/freescale/ls2080aqds/ddr.h +++ b/board/freescale/ls2080aqds/ddr.h @@ -28,10 +28,10 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,}, - {2, 1666, 0, 4, 7, 0x08090A0C, 0x0D0F100B,}, - {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,}, - {2, 2300, 0, 4, 8, 0x090A0C0F, 0x1012130C,}, + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 8, 7, 0x08090A0C, 0x0D0F100B,}, + {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2300, 0, 8, 8, 0x090A0C0F, 0x1012130C,}, {} }; @@ -42,10 +42,10 @@ static const struct board_specific_parameters udimm2[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 0, 4, 0xd, 0x0C0A0A00, 0x00000009,}, - {2, 1666, 0, 4, 0xd, 0x0C0A0A00, 0x00000009,}, - {2, 1900, 0, 4, 0xe, 0x0D0C0B00, 0x0000000A,}, - {2, 2200, 0, 4, 0xe, 0x0D0C0B00, 0x0000000A,}, + {2, 1350, 0, 8, 0xd, 0x0C0A0A00, 0x00000009,}, + {2, 1666, 0, 8, 0xd, 0x0C0A0A00, 0x00000009,}, + {2, 1900, 0, 8, 0xe, 0x0D0C0B00, 0x0000000A,}, + {2, 2200, 0, 8, 0xe, 0x0D0C0B00, 0x0000000A,}, {} }; @@ -55,10 +55,10 @@ static const struct board_specific_parameters rdimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,}, - {2, 1666, 0, 4, 7, 0x08090A0C, 0x0D0F100B,}, - {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,}, - {2, 2200, 0, 4, 8, 0x090A0C0F, 0x1012130C,}, + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 8, 7, 0x08090A0C, 0x0D0F100B,}, + {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2200, 0, 8, 8, 0x090A0C0F, 0x1012130C,}, {} }; @@ -69,10 +69,10 @@ static const struct board_specific_parameters rdimm2[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,}, - {2, 1666, 0, 4, 7, 0x0B0A090C, 0x0D0F100B,}, - {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,}, - {2, 2200, 0, 4, 8, 0x090A0C0F, 0x1012130C,}, + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 8, 7, 0x0B0A090C, 0x0D0F100B,}, + {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2200, 0, 8, 8, 0x090A0C0F, 0x1012130C,}, {} }; diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index b3bd40afb77..897793d85b7 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -282,7 +282,9 @@ void fdt_fixup_board_enet(void *fdt) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { +#ifdef CONFIG_FSL_MC_ENET int err; +#endif u64 base[CONFIG_NR_DRAM_BANKS]; u64 size[CONFIG_NR_DRAM_BANKS]; diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README index 6708ca9cc7d..b1613ba6800 100644 --- a/board/freescale/ls2080ardb/README +++ b/board/freescale/ls2080ardb/README @@ -5,48 +5,9 @@ evaluation, and development platform that supports the QorIQ LS2080A Layerscape Architecture processor. LS2080A SoC Overview ------------------- -The LS2080A integrated multicore processor combines eight ARM Cortex-A57 -processor cores with high-performance data path acceleration logic and network -and peripheral bus interfaces required for networking, telecom/datacom, -wireless infrastructure, and mil/aerospace applications. - -The LS2080A SoC includes the following function and features: - - - Eight 64-bit ARM Cortex-A57 CPUs - - 1 MB platform cache with ECC - - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support - - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by - the AIOP - - Data path acceleration architecture (DPAA2) incorporating acceleration for - the following functions: - - Packet parsing, classification, and distribution (WRIOP) - - Queue and Hardware buffer management for scheduling, packet sequencing, and - congestion management, buffer allocation and de-allocation (QBMan) - - Cryptography acceleration (SEC) at up to 10 Gbps - - RegEx pattern matching acceleration (PME) at up to 10 Gbps - - Decompression/compression acceleration (DCE) at up to 20 Gbps - - Accelerated I/O processing (AIOP) at up to 20 Gbps - - QDMA engine - - 16 SerDes lanes at up to 10.3125 GHz - - Ethernet interfaces - - Up to eight 10 Gbps Ethernet MACs - - Up to eight 1 / 2.5 Gbps Ethernet MACs - - High-speed peripheral interfaces - - Four PCIe 3.0 controllers, one supporting SR-IOV - - Additional peripheral interfaces - - Two serial ATA (SATA 3.0) controllers - - Two high-speed USB 3.0 controllers with integrated PHY - - Enhanced secure digital host controller (eSDXC/eMMC) - - Serial peripheral interface (SPI) controller - - Quad Serial Peripheral Interface (QSPI) Controller - - Four I2C controllers - - Two DUARTs - - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash - - Support for hardware virtualization and partitioning enforcement - - QorIQ platform's trust architecture 3.0 - - Service processor (SP) provides pre-boot initialization and secure-boot - capabilities +-------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A +SoC overview. LS2080ARDB board Overview ----------------------- diff --git a/board/freescale/ls2080ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h index b3c6306b8f3..8d5a49061ce 100644 --- a/board/freescale/ls2080ardb/ddr.h +++ b/board/freescale/ls2080ardb/ddr.h @@ -28,10 +28,10 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,}, - {2, 1666, 0, 5, 9, 0x090A0B0E, 0x0F11110C,}, - {2, 1900, 0, 6, 0xA, 0x0B0C0E11, 0x1214140F,}, - {2, 2300, 0, 6, 0xB, 0x0C0D0F12, 0x14161610,}, + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 10, 9, 0x090A0B0E, 0x0F11110C,}, + {2, 1900, 0, 12, 0xA, 0x0B0C0E11, 0x1214140F,}, + {2, 2300, 0, 12, 0xB, 0x0C0D0F12, 0x14161610,}, {} }; @@ -42,10 +42,10 @@ static const struct board_specific_parameters udimm2[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 0, 4, 0xd, 0x0C0A0A00, 0x00000009,}, - {2, 1666, 0, 4, 0xd, 0x0C0A0A00, 0x00000009,}, - {2, 1900, 0, 4, 0xe, 0x0D0C0B00, 0x0000000A,}, - {2, 2200, 0, 4, 0xe, 0x0D0C0B00, 0x0000000A,}, + {2, 1350, 0, 8, 0xd, 0x0C0A0A00, 0x00000009,}, + {2, 1666, 0, 8, 0xd, 0x0C0A0A00, 0x00000009,}, + {2, 1900, 0, 8, 0xe, 0x0D0C0B00, 0x0000000A,}, + {2, 2200, 0, 8, 0xe, 0x0D0C0B00, 0x0000000A,}, {} }; @@ -55,10 +55,10 @@ static const struct board_specific_parameters rdimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,}, - {2, 1666, 0, 4, 7, 0x08090A0C, 0x0D0F100B,}, - {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,}, - {2, 2200, 0, 4, 8, 0x090A0C0F, 0x1012130C,}, + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 8, 7, 0x08090A0C, 0x0D0F100B,}, + {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2200, 0, 8, 8, 0x090A0C0F, 0x1012130C,}, {} }; @@ -69,10 +69,10 @@ static const struct board_specific_parameters rdimm2[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,}, - {2, 1666, 0, 4, 7, 0x0B0A090C, 0x0D0F100B,}, - {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,}, - {2, 2200, 0, 4, 8, 0x090A0C0F, 0x1012130C,}, + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 8, 7, 0x0B0A090C, 0x0D0F100B,}, + {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2200, 0, 8, 8, 0x090A0C0F, 0x1012130C,}, {} }; diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index fb39af64452..52e5e3f516d 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -156,7 +156,9 @@ int board_init(void) { char *env_hwconfig; u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; +#ifdef CONFIG_FSL_MC_ENET u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE; +#endif u32 val; init_final_memctl_regs(); @@ -178,8 +180,10 @@ int board_init(void) QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN); +#ifdef CONFIG_FSL_MC_ENET /* invert AQR405 IRQ pins polarity */ out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK); +#endif return 0; } @@ -261,7 +265,9 @@ void fdt_fixup_board_enet(void *fdt) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { +#ifdef CONFIG_FSL_MC_ENET int err; +#endif u64 base[CONFIG_NR_DRAM_BANKS]; u64 size[CONFIG_NR_DRAM_BANKS]; diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c index 2d4d10f351a..912d6a950f8 100644 --- a/board/freescale/t102xqds/ddr.c +++ b/board/freescale/t102xqds/ddr.c @@ -35,18 +35,18 @@ static const struct board_specific_parameters udimm0[] = { * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ #if defined(CONFIG_SYS_FSL_DDR4) - {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, - {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,}, - {1, 1666, 0, 4, 6, 0x0708090B, 0x0C0D0E09,}, - {1, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,}, - {1, 2200, 0, 4, 7, 0x08090A0D, 0x0F0F100C,}, + {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 1900, 0, 8, 6, 0x08080A0C, 0x0D0E0F0A,}, + {1, 1666, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {1, 1900, 0, 8, 6, 0x08080A0C, 0x0D0E0F0A,}, + {1, 2200, 0, 8, 7, 0x08090A0D, 0x0F0F100C,}, #elif defined(CONFIG_SYS_FSL_DDR3) - {2, 833, 0, 4, 6, 0x06060607, 0x08080807,}, - {2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,}, - {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, - {1, 833, 0, 4, 6, 0x06060607, 0x08080807,}, - {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,}, - {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 833, 0, 8, 6, 0x06060607, 0x08080807,}, + {2, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09,}, + {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, + {1, 833, 0, 8, 6, 0x06060607, 0x08080807,}, + {1, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09,}, + {1, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, #else #error DDR type not defined #endif diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c index adf9fd5f78b..60ab9ff8ade 100644 --- a/board/freescale/t102xrdb/ddr.c +++ b/board/freescale/t102xrdb/ddr.c @@ -34,12 +34,12 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ - {2, 833, 0, 4, 6, 0x06060607, 0x08080807,}, - {2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,}, - {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, - {1, 833, 0, 4, 6, 0x06060607, 0x08080807,}, - {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,}, - {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 833, 0, 8, 6, 0x06060607, 0x08080807,}, + {2, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09,}, + {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, + {1, 833, 0, 8, 6, 0x06060607, 0x08080807,}, + {1, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09,}, + {1, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, {} }; diff --git a/board/freescale/t1040qds/ddr.h b/board/freescale/t1040qds/ddr.h index a6e1673525f..1e087460cb9 100644 --- a/board/freescale/t1040qds/ddr.h +++ b/board/freescale/t1040qds/ddr.h @@ -29,18 +29,18 @@ static const struct board_specific_parameters udimm0[] = { * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ #ifdef CONFIG_SYS_FSL_DDR4 - {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, - {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,}, - {1, 1666, 0, 4, 6, 0x0708090B, 0x0C0D0E09,}, - {1, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,}, - {1, 2200, 0, 4, 7, 0x08090A0D, 0x0F0F100C,}, + {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 1900, 0, 8, 6, 0x08080A0C, 0x0D0E0F0A,}, + {1, 1666, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {1, 1900, 0, 8, 6, 0x08080A0C, 0x0D0E0F0A,}, + {1, 2200, 0, 8, 7, 0x08090A0D, 0x0F0F100C,}, #elif defined(CONFIG_SYS_FSL_DDR3) - {2, 833, 0, 4, 6, 0x06060607, 0x08080807,}, - {2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,}, - {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, - {1, 833, 0, 4, 6, 0x06060607, 0x08080807,}, - {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,}, - {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 833, 0, 8, 6, 0x06060607, 0x08080807,}, + {2, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09,}, + {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, + {1, 833, 0, 8, 6, 0x06060607, 0x08080807,}, + {1, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09,}, + {1, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A,}, #else #error DDR type not defined #endif diff --git a/board/freescale/t104xrdb/ddr.h b/board/freescale/t104xrdb/ddr.h index b9c02f7fe0f..012991cf469 100644 --- a/board/freescale/t104xrdb/ddr.h +++ b/board/freescale/t104xrdb/ddr.h @@ -29,20 +29,20 @@ static const struct board_specific_parameters udimm0[] = { * ranks| mhz| GB |adjst| start | ctl2 */ #ifdef CONFIG_SYS_FSL_DDR4 - {2, 1600, 4, 4, 6, 0x07090A0c, 0x0e0f100a}, + {2, 1600, 4, 8, 6, 0x07090A0c, 0x0e0f100a}, #elif defined(CONFIG_SYS_FSL_DDR3) - {2, 833, 4, 4, 6, 0x06060607, 0x08080807}, - {2, 833, 0, 4, 6, 0x06060607, 0x08080807}, - {2, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09}, - {2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09}, - {2, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A}, - {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A}, - {1, 833, 4, 4, 6, 0x06060607, 0x08080807}, - {1, 833, 0, 4, 6, 0x06060607, 0x08080807}, - {1, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09}, - {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09}, - {1, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A}, - {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A}, + {2, 833, 4, 8, 6, 0x06060607, 0x08080807}, + {2, 833, 0, 8, 6, 0x06060607, 0x08080807}, + {2, 1350, 4, 8, 7, 0x0708080A, 0x0A0B0C09}, + {2, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09}, + {2, 1666, 4, 8, 7, 0x0808090B, 0x0C0D0E0A}, + {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A}, + {1, 833, 4, 8, 6, 0x06060607, 0x08080807}, + {1, 833, 0, 8, 6, 0x06060607, 0x08080807}, + {1, 1350, 4, 8, 7, 0x0708080A, 0x0A0B0C09}, + {1, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09}, + {1, 1666, 4, 8, 7, 0x0808090B, 0x0C0D0E0A}, + {1, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A}, #else #error DDR type not defined #endif diff --git a/board/freescale/t208xqds/ddr.h b/board/freescale/t208xqds/ddr.h index 9c26fdf3bd6..255ab2c5433 100644 --- a/board/freescale/t208xqds/ddr.h +++ b/board/freescale/t208xqds/ddr.h @@ -28,17 +28,17 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ - {2, 1200, 0, 5, 7, 0x0708090a, 0x0b0c0d09}, - {2, 1400, 0, 5, 7, 0x08090a0c, 0x0d0e0f0a}, - {2, 1700, 0, 5, 8, 0x090a0b0c, 0x0e10110c}, - {2, 1900, 0, 5, 8, 0x090b0c0f, 0x1012130d}, - {2, 2140, 0, 5, 8, 0x090b0c0f, 0x1012130d}, - {1, 1200, 0, 5, 7, 0x0808090a, 0x0b0c0c0a}, - {1, 1500, 0, 5, 6, 0x07070809, 0x0a0b0b09}, - {1, 1600, 0, 5, 8, 0x090b0b0d, 0x0d0e0f0b}, - {1, 1700, 0, 4, 8, 0x080a0a0c, 0x0c0d0e0a}, - {1, 1900, 0, 5, 8, 0x090a0c0d, 0x0e0f110c}, - {1, 2140, 0, 4, 8, 0x090a0b0d, 0x0e0f110b}, + {2, 1200, 0, 10, 7, 0x0708090a, 0x0b0c0d09}, + {2, 1400, 0, 10, 7, 0x08090a0c, 0x0d0e0f0a}, + {2, 1700, 0, 10, 8, 0x090a0b0c, 0x0e10110c}, + {2, 1900, 0, 10, 8, 0x090b0c0f, 0x1012130d}, + {2, 2140, 0, 10, 8, 0x090b0c0f, 0x1012130d}, + {1, 1200, 0, 10, 7, 0x0808090a, 0x0b0c0c0a}, + {1, 1500, 0, 10, 6, 0x07070809, 0x0a0b0b09}, + {1, 1600, 0, 10, 8, 0x090b0b0d, 0x0d0e0f0b}, + {1, 1700, 0, 8, 8, 0x080a0a0c, 0x0c0d0e0a}, + {1, 1900, 0, 10, 8, 0x090a0c0d, 0x0e0f110c}, + {1, 2140, 0, 8, 8, 0x090a0b0d, 0x0e0f110b}, {} }; @@ -49,15 +49,15 @@ static const struct board_specific_parameters rdimm0[] = { * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ /* TODO: need tuning these parameters if RDIMM is used */ - {4, 1350, 0, 5, 9, 0x08070605, 0x06070806}, - {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906}, - {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07}, - {2, 1350, 0, 5, 9, 0x08070605, 0x06070806}, - {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06}, - {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07}, - {1, 1350, 0, 5, 9, 0x08070605, 0x06070806}, - {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06}, - {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07}, + {4, 1350, 0, 10, 9, 0x08070605, 0x06070806}, + {4, 1666, 0, 10, 11, 0x0a080706, 0x07090906}, + {4, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07}, + {2, 1350, 0, 10, 9, 0x08070605, 0x06070806}, + {2, 1666, 0, 10, 11, 0x0a090806, 0x08090a06}, + {2, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07}, + {1, 1350, 0, 10, 9, 0x08070605, 0x06070806}, + {1, 1666, 0, 10, 11, 0x0a090806, 0x08090a06}, + {1, 2140, 0, 8, 12, 0x0b090807, 0x080a0b07}, {} }; diff --git a/board/freescale/t208xrdb/ddr.h b/board/freescale/t208xrdb/ddr.h index 08cbb606d5e..175cf56a094 100644 --- a/board/freescale/t208xrdb/ddr.h +++ b/board/freescale/t208xrdb/ddr.h @@ -28,16 +28,16 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | */ - {2, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a}, - {2, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09}, - {2, 1600, 2, 5, 8, 0x0808070b, 0x0c0d0e0a}, - {2, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, - {2, 1900, 0, 5, 7, 0x0808080c, 0x0b0c0c09}, - {1, 1200, 2, 5, 7, 0x0808090a, 0x0b0c0c0a}, - {1, 1500, 2, 5, 6, 0x07070809, 0x0a0b0b09}, - {1, 1600, 2, 5, 8, 0x0808070b, 0x0c0d0e0a}, - {1, 1700, 2, 4, 7, 0x080a0a0c, 0x0c0d0e0a}, - {1, 1900, 0, 5, 7, 0x0808080c, 0x0b0c0c09}, + {2, 1200, 2, 10, 7, 0x0808090a, 0x0b0c0c0a}, + {2, 1500, 2, 10, 6, 0x07070809, 0x0a0b0b09}, + {2, 1600, 2, 10, 8, 0x0808070b, 0x0c0d0e0a}, + {2, 1700, 2, 8, 7, 0x080a0a0c, 0x0c0d0e0a}, + {2, 1900, 0, 10, 7, 0x0808080c, 0x0b0c0c09}, + {1, 1200, 2, 10, 7, 0x0808090a, 0x0b0c0c0a}, + {1, 1500, 2, 10, 6, 0x07070809, 0x0a0b0b09}, + {1, 1600, 2, 10, 8, 0x0808070b, 0x0c0d0e0a}, + {1, 1700, 2, 8, 7, 0x080a0a0c, 0x0c0d0e0a}, + {1, 1900, 0, 10, 7, 0x0808080c, 0x0b0c0c09}, {} }; diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h index 4d0e3c497db..0b0cc9af39a 100644 --- a/board/freescale/t4qds/ddr.h +++ b/board/freescale/t4qds/ddr.h @@ -31,16 +31,16 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ - {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, - {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, - {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {2, 1350, 4, 8, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 10, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 8, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 10, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 8, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 8, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 10, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 10, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 8, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 8, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, {} }; @@ -50,15 +50,15 @@ static const struct board_specific_parameters rdimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ - {4, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, - {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906, 0xff, 2, 0}, - {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, - {2, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, - {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, - {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, - {1, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, - {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, - {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {4, 1350, 0, 10, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {4, 1666, 0, 10, 11, 0x0a080706, 0x07090906, 0xff, 2, 0}, + {4, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {2, 1350, 0, 10, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {2, 1666, 0, 10, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {2, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {1, 1350, 0, 10, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {1, 1666, 0, 10, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {1, 2140, 0, 8, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, {} }; diff --git a/board/freescale/t4rdb/ddr.h b/board/freescale/t4rdb/ddr.h index 7b854767e7a..f01ebb22b57 100644 --- a/board/freescale/t4rdb/ddr.h +++ b/board/freescale/t4rdb/ddr.h @@ -27,16 +27,16 @@ static const struct board_specific_parameters udimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a}, - {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09}, - {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b}, - {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a}, - {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c}, - {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b}, + {2, 1350, 4, 8, 8, 0x0809090b, 0x0c0c0d0a}, + {2, 1350, 0, 10, 7, 0x0709090b, 0x0c0c0d09}, + {2, 1666, 4, 8, 8, 0x080a0a0d, 0x0d10100b}, + {2, 1666, 0, 10, 7, 0x080a0a0c, 0x0d0d0e0a}, + {2, 1900, 0, 8, 8, 0x090a0b0e, 0x0f11120c}, + {2, 2140, 0, 8, 8, 0x090a0b0e, 0x0f11120c}, + {1, 1350, 0, 10, 8, 0x0809090b, 0x0c0c0d0a}, + {1, 1700, 0, 10, 8, 0x080a0a0c, 0x0c0d0e0a}, + {1, 1900, 0, 8, 8, 0x080a0a0c, 0x0e0e0f0a}, + {1, 2140, 0, 8, 8, 0x090a0b0c, 0x0e0f100b}, {} }; @@ -46,15 +46,15 @@ static const struct board_specific_parameters rdimm0[] = { * num| hi| rank| clk| wrlvl | wrlvl | wrlvl * ranks| mhz| GB |adjst| start | ctl2 | ctl3 */ - {4, 1350, 0, 5, 9, 0x08070605, 0x06070806}, - {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906}, - {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07}, - {2, 1350, 0, 5, 9, 0x08070605, 0x06070806}, - {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06}, - {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07}, - {1, 1350, 0, 5, 9, 0x08070605, 0x06070806}, - {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06}, - {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07}, + {4, 1350, 0, 10, 9, 0x08070605, 0x06070806}, + {4, 1666, 0, 10, 11, 0x0a080706, 0x07090906}, + {4, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07}, + {2, 1350, 0, 10, 9, 0x08070605, 0x06070806}, + {2, 1666, 0, 10, 11, 0x0a090806, 0x08090a06}, + {2, 2140, 0, 10, 12, 0x0b090807, 0x080a0b07}, + {1, 1350, 0, 10, 9, 0x08070605, 0x06070806}, + {1, 1666, 0, 10, 11, 0x0a090806, 0x08090a06}, + {1, 2140, 0, 8, 12, 0x0b090807, 0x080a0b07}, {} }; |