diff options
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/imxrt1020-evk/README | 31 |
1 files changed, 0 insertions, 31 deletions
diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README deleted file mode 100644 index 9bc5bc00bc8..00000000000 --- a/board/freescale/imxrt1020-evk/README +++ /dev/null @@ -1,31 +0,0 @@ -How to use U-Boot on NXP i.MXRT1020 EVK ------------------------------------------------ - -- Build U-Boot for i.MXRT1020 EVK: - -$ make mrproper -$ make imxrt1020-evk_defconfig -$ make - -This will generate the SPL image called SPL and the u-boot.img. - -- Flash the SPL image into the micro SD card: - -sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync - -- Flash the u-boot.img image into the micro SD card: - -sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync - -- Jumper settings: - -SW8: 0 1 1 0 - -where 0 means bottom position and 1 means top position (from the -switch label numbers reference). - -- Connect the USB cable between the EVK and the PC for the console. -(The USB console connector is the one close the ethernet connector) - -- Insert the micro SD card in the board, power it up and U-Boot messages should -come up. |