aboutsummaryrefslogtreecommitdiff
path: root/board/inka4x0/inkadiag.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/inka4x0/inkadiag.c')
-rw-r--r--board/inka4x0/inkadiag.c465
1 files changed, 0 insertions, 465 deletions
diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c
deleted file mode 100644
index 4c432051298..00000000000
--- a/board/inka4x0/inkadiag.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * (C) Copyright 2008, 2009 Andreas Pfefferle,
- * DENX Software Engineering, ap@denx.de.
- * (C) Copyright 2009 Detlev Zundel,
- * DENX Software Engineering, dzu@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/io.h>
-#include <common.h>
-#include <config.h>
-#include <console.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-
-#include <command.h>
-
-/* This is needed for the includes in ns16550.h */
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#include <ns16550.h>
-
-#define GPIO_BASE ((u_char *)CONFIG_SYS_CS3_START)
-
-#define DIGIN_TOUCHSCR_MASK 0x00003000 /* Inputs 12-13 */
-#define DIGIN_KEYB_MASK 0x00010000 /* Input 16 */
-
-#define DIGIN_DRAWER_SW1 0x00400000 /* Input 22 */
-#define DIGIN_DRAWER_SW2 0x00800000 /* Input 23 */
-
-#define DIGIO_LED0 0x00000001 /* Output 0 */
-#define DIGIO_LED1 0x00000002 /* Output 1 */
-#define DIGIO_LED2 0x00000004 /* Output 2 */
-#define DIGIO_LED3 0x00000008 /* Output 3 */
-#define DIGIO_LED4 0x00000010 /* Output 4 */
-#define DIGIO_LED5 0x00000020 /* Output 5 */
-
-#define DIGIO_DRAWER1 0x00000100 /* Output 8 */
-#define DIGIO_DRAWER2 0x00000200 /* Output 9 */
-
-#define SERIAL_PORT_BASE ((u_char *)CONFIG_SYS_CS2_START)
-
-#define PSC_OP1_RTS 0x01
-#define PSC_OP0_RTS 0x01
-
-/*
- * Table with supported baudrates (defined in inka4x0.h)
- */
-static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
-#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0]))
-
-static unsigned int inka_digin_get_input(void)
-{
- return in_8(GPIO_BASE + 0) << 0 | in_8(GPIO_BASE + 1) << 8 |
- in_8(GPIO_BASE + 2) << 16 | in_8(GPIO_BASE + 3) << 24;
-}
-
-#define LED_HIGH(NUM) \
- do { \
- setbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \
- } while (0)
-
-#define LED_LOW(NUM) \
- do { \
- clrbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \
- } while (0)
-
-#define CHECK_LED(NUM) \
- do { \
- if (state & (1 << NUM)) { \
- LED_HIGH(NUM); \
- } else { \
- LED_LOW(NUM); \
- } \
- } while (0)
-
-static void inka_digio_set_output(unsigned int state, int which)
-{
- volatile struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
-
- if (which == 0) {
- /* other */
- CHECK_LED(0);
- CHECK_LED(1);
- CHECK_LED(2);
- CHECK_LED(3);
- CHECK_LED(4);
- CHECK_LED(5);
- } else {
- if (which == 1) {
- /* drawer1 */
- if (state) {
- clrbits_be32(&gpio->simple_dvo, 0x1000);
- udelay(1);
- setbits_be32(&gpio->simple_dvo, 0x1000);
- } else {
- setbits_be32(&gpio->simple_dvo, 0x1000);
- udelay(1);
- clrbits_be32(&gpio->simple_dvo, 0x1000);
- }
- }
- if (which == 2) {
- /* drawer 2 */
- if (state) {
- clrbits_be32(&gpio->simple_dvo, 0x2000);
- udelay(1);
- setbits_be32(&gpio->simple_dvo, 0x2000);
- } else {
- setbits_be32(&gpio->simple_dvo, 0x2000);
- udelay(1);
- clrbits_be32(&gpio->simple_dvo, 0x2000);
- }
- }
- }
- udelay(1);
-}
-
-static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[]) {
- unsigned int state, val;
-
- switch (argc) {
- case 3:
- /* Write a value */
- val = simple_strtol(argv[2], NULL, 16);
-
- if (strcmp(argv[1], "drawer1") == 0) {
- inka_digio_set_output(val, 1);
- } else if (strcmp(argv[1], "drawer2") == 0) {
- inka_digio_set_output(val, 2);
- } else if (strcmp(argv[1], "other") == 0)
- inka_digio_set_output(val, 0);
- else {
- printf("Invalid argument: %s\n", argv[1]);
- return -1;
- }
- /* fall through */
- case 2:
- /* Read a value */
- state = inka_digin_get_input();
-
- if (strcmp(argv[1], "drawer1") == 0) {
- val = (state & DIGIN_DRAWER_SW1) >> (ffs(DIGIN_DRAWER_SW1) - 1);
- } else if (strcmp(argv[1], "drawer2") == 0) {
- val = (state & DIGIN_DRAWER_SW2) >> (ffs(DIGIN_DRAWER_SW2) - 1);
- } else if (strcmp(argv[1], "other") == 0) {
- val = ((state & DIGIN_KEYB_MASK) >> (ffs(DIGIN_KEYB_MASK) - 1))
- | (state & DIGIN_TOUCHSCR_MASK) >> (ffs(DIGIN_TOUCHSCR_MASK) - 2);
- } else {
- printf("Invalid argument: %s\n", argv[1]);
- return -1;
- }
- printf("exit code: 0x%X\n", val);
- return 0;
- default:
- return cmd_usage(cmdtp);
- }
-
- return -1;
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int ser_init(volatile struct mpc5xxx_psc *psc, int baudrate)
-{
- unsigned long baseclk;
- int div;
-
- /* reset PSC */
- out_8(&psc->command, PSC_SEL_MODE_REG_1);
-
- /* select clock sources */
-
- out_be16(&psc->psc_clock_select, 0);
- baseclk = (gd->arch.ipb_clk + 16) / 32;
-
- /* switch to UART mode */
- out_be32(&psc->sicr, 0);
-
- /* configure parity, bit length and so on */
-
- out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE);
- out_8(&psc->mode, PSC_MODE_ONE_STOP);
-
- /* set up UART divisor */
- div = (baseclk + (baudrate / 2)) / baudrate;
- out_8(&psc->ctur, (div >> 8) & 0xff);
- out_8(&psc->ctlr, div & 0xff);
-
- /* disable all interrupts */
- out_be16(&psc->psc_imr, 0);
-
- /* reset and enable Rx/Tx */
- out_8(&psc->command, PSC_RST_RX);
- out_8(&psc->command, PSC_RST_TX);
- out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE);
-
- return 0;
-}
-
-static void ser_putc(volatile struct mpc5xxx_psc *psc, const char c)
-{
- /* Wait 1 second for last character to go. */
- int i = 0;
-
- while (!(psc->psc_status & PSC_SR_TXEMP) && (i++ < 1000000/10))
- udelay(10);
- psc->psc_buffer_8 = c;
-
-}
-
-static int ser_getc(volatile struct mpc5xxx_psc *psc)
-{
- /* Wait for a character to arrive. */
- int i = 0;
-
- while (!(in_be16(&psc->psc_status) & PSC_SR_RXRDY) && (i++ < 1000000/10))
- udelay(10);
-
- return in_8(&psc->psc_buffer_8);
-}
-
-static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[]) {
- volatile struct NS16550 *uart;
- volatile struct mpc5xxx_psc *psc;
- unsigned int num, mode;
- int combrd, baudrate, i, j, len;
- int address;
-
- if (argc < 5)
- return cmd_usage(cmdtp);
-
- argc--;
- argv++;
-
- num = simple_strtol(argv[0], NULL, 0);
- if (num < 0 || num > 11) {
- printf("invalid argument for num: %d\n", num);
- return -1;
- }
-
- mode = simple_strtol(argv[1], NULL, 0);
-
- combrd = 0;
- baudrate = simple_strtoul(argv[2], NULL, 10);
- for (i=0; i<N_BAUDRATES; ++i) {
- if (baudrate == baudrate_table[i])
- break;
- }
- if (i == N_BAUDRATES) {
- printf("## Baudrate %d bps not supported\n",
- baudrate);
- return 1;
- }
- combrd = 115200 / baudrate;
-
- uart = (struct NS16550 *)(SERIAL_PORT_BASE + (num << 3));
-
- printf("Testing uart %d.\n\n", num);
-
- if ((num >= 0) && (num <= 7)) {
- if (mode & 1) {
- /* turn on 'loopback' mode */
- out_8(&uart->mcr, UART_MCR_LOOP);
- } else {
- /*
- * establish the UART's operational parameters
- * set DLAB=1, so rbr accesses DLL
- */
- out_8(&uart->lcr, UART_LCR_DLAB);
- /* set baudrate */
- out_8(&uart->rbr, combrd);
- /* set data-format: 8-N-1 */
- out_8(&uart->lcr, UART_LCR_WLS_8);
- }
-
- if (mode & 2) {
- /* set request to send */
- out_8(&uart->mcr, UART_MCR_RTS);
- udelay(10);
- /* check clear to send */
- if ((in_8(&uart->msr) & UART_MSR_CTS) == 0x00)
- return -1;
- }
- if (mode & 4) {
- /* set data terminal ready */
- out_8(&uart->mcr, UART_MCR_DTR);
- udelay(10);
- /* check data set ready and carrier detect */
- if ((in_8(&uart->msr) & (UART_MSR_DSR | UART_MSR_DCD))
- != (UART_MSR_DSR | UART_MSR_DCD))
- return -1;
- }
-
- /* write each message-character, read it back, and display it */
- for (i = 0, len = strlen(argv[3]); i < len; ++i) {
- j = 0;
- while ((in_8(&uart->lsr) & UART_LSR_THRE) == 0x00) {
- if (j++ > CONFIG_SYS_HZ)
- break;
- udelay(10);
- }
- out_8(&uart->rbr, argv[3][i]);
- j = 0;
- while ((in_8(&uart->lsr) & UART_LSR_DR) == 0x00) {
- if (j++ > CONFIG_SYS_HZ)
- break;
- udelay(10);
- }
- printf("%c", in_8(&uart->rbr));
- }
- printf("\n\n");
- out_8(&uart->mcr, 0x00);
- } else {
- address = 0;
-
- switch (num) {
- case 8:
- address = MPC5XXX_PSC6;
- break;
- case 9:
- address = MPC5XXX_PSC3;
- break;
- case 10:
- address = MPC5XXX_PSC2;
- break;
- case 11:
- address = MPC5XXX_PSC1;
- break;
- }
- psc = (struct mpc5xxx_psc *)address;
- ser_init(psc, simple_strtol(argv[2], NULL, 0));
- if (mode & 2) {
- /* set request to send */
- out_8(&psc->op0, PSC_OP0_RTS);
- udelay(10);
- /* check clear to send */
- if ((in_8(&psc->ip) & PSC_IPCR_CTS) == 0)
- return -1;
- }
- len = strlen(argv[3]);
- for (i = 0; i < len; ++i) {
- ser_putc(psc, argv[3][i]);
- printf("%c", ser_getc(psc));
- }
- printf("\n\n");
- }
- return 0;
-}
-
-#define BUZZER_GPT (MPC5XXX_GPT + 0x60) /* GPT6 */
-static void buzzer_turn_on(unsigned int freq)
-{
- volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
-
- const u32 prescale = gd->arch.ipb_clk / freq / 128;
- const u32 count = 128;
- const u32 width = 64;
-
- gpt->cir = (prescale << 16) | count;
- gpt->pwmcr = width << 16;
- gpt->emsr = 3; /* Timer enabled for PWM */
-}
-
-static void buzzer_turn_off(void)
-{
- volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
-
- gpt->emsr = 0;
-}
-
-static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[]) {
-
- unsigned int period, freq;
- int prev, i;
-
- if (argc != 3)
- return cmd_usage(cmdtp);
-
- argc--;
- argv++;
-
- period = simple_strtol(argv[0], NULL, 0);
- if (!period)
- printf("Zero period is senseless\n");
- argc--;
- argv++;
-
- freq = simple_strtol(argv[0], NULL, 0);
- /* avoid zero prescale in buzzer_turn_on() */
- if (freq > gd->arch.ipb_clk / 128) {
- printf("%dHz exceeds maximum (%ldHz)\n", freq,
- gd->arch.ipb_clk / 128);
- } else if (!freq)
- printf("Zero frequency is senseless\n");
- else
- buzzer_turn_on(freq);
-
- clear_ctrlc();
- prev = disable_ctrlc(0);
-
- printf("Buzzing for %d ms. Type ^C to abort!\n\n", period);
-
- i = 0;
- while (!ctrlc() && (i++ < CONFIG_SYS_HZ))
- udelay(period);
-
- clear_ctrlc();
- disable_ctrlc(prev);
-
- buzzer_turn_off();
-
- return 0;
-}
-
-static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-
-cmd_tbl_t cmd_inkadiag_sub[] = {
- U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input",
- "<drawer1|drawer2|other> [value] - get or set specified signal"),
- U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port",
- "<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n"
- "and baudrate with msg"),
- U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer",
- "<period> <freq> - turn buzzer on for period ms with freq hz"),
- U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help",
- "[command] - get help for command"),
-};
-
-static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[]) {
- extern int _do_help (cmd_tbl_t *cmd_start, int cmd_items,
- cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[]);
- /* do_help prints command name - we prepend inkadiag to our subcommands! */
-#ifdef CONFIG_SYS_LONGHELP
- puts ("inkadiag ");
-#endif
- return _do_help(&cmd_inkadiag_sub[0],
- ARRAY_SIZE(cmd_inkadiag_sub), cmdtp, flag, argc, argv);
-}
-
-static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[]) {
- cmd_tbl_t *c;
-
- c = find_cmd_tbl(argv[1], &cmd_inkadiag_sub[0], ARRAY_SIZE(cmd_inkadiag_sub));
-
- if (c) {
- argc--;
- argv++;
- return c->cmd(c, flag, argc, argv);
- } else {
- /* Unrecognized command */
- return cmd_usage(cmdtp);
- }
-}
-
-U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag,
- "inkadiag - inka diagnosis\n",
- "[inkadiag what ...]\n"
- " - perform a diagnosis on inka hardware\n"
- "'inkadiag' performs hardware tests.");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 09:01:21 +0000