diff options
Diffstat (limited to 'board/netstal')
| -rw-r--r-- | board/netstal/hcu4/hcu4.c | 9 | ||||
| -rw-r--r-- | board/netstal/hcu5/sdram.c | 26 | ||||
| -rw-r--r-- | board/netstal/mcu25/mcu25.c | 9 |
3 files changed, 2 insertions, 42 deletions
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index dc526fcd7aa..42c7c16cdf0 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -121,15 +121,6 @@ void hcu_led_set(u32 value) } /* - * sdram_init - Dummy implementation for start.S, spd_sdram or initdram - * used for HCUx - */ -void sdram_init(void) -{ - return; -} - -/* * hcu_get_slot */ u32 hcu_get_slot(void) diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 6b1b53a4d05..d8817b831af 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -40,28 +40,6 @@ void hcu_led_set(u32 value); void dcbz_area(u32 start_address, u32 num_bytes); -#define DDR_DCR_BASE 0x10 -#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */ -#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */ - -#define DDR0_01_INT_MASK_MASK 0x000000FF -#define DDR0_00_INT_ACK_ALL 0x7F000000 -#define DDR0_01_INT_MASK_ALL_ON 0x000000FF -#define DDR0_01_INT_MASK_ALL_OFF 0x00000000 - -#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */ -#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000 -#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000 - -#define DDR0_22 0x16 -/* ECC */ -#define DDR0_22_CTRL_RAW_MASK 0x03000000 -#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not enabled */ -#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC no correction */ -#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* Not a ECC RAM*/ -#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC correcting on */ -#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7) - #define ECC_RAM 0x03267F0B #define NO_ECC_RAM 0x00267F0B @@ -111,11 +89,11 @@ static int wait_for_dlllock(void) /* -----------------------------------------------------------+ * Wait for the DCC master delay line to finish calibration * ----------------------------------------------------------*/ - mtdcr(ddrcfga, DDR0_17); + mtdcr(memcfga, DDR0_17); val = DDR0_17_DLLLOCKREG_UNLOCKED; while (wait != 0xffff) { - val = mfdcr(ddrcfgd); + val = mfdcr(memcfgd); if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED) /* dlllockreg bit on */ diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c index 2b21444e2d2..07891f6785a 100644 --- a/board/netstal/mcu25/mcu25.c +++ b/board/netstal/mcu25/mcu25.c @@ -128,15 +128,6 @@ void hcu_led_set(u32 value) } /* - * sdram_init - Dummy implementation for start.S, spd_sdram or initdram - * used for HCUx - */ -void sdram_init(void) -{ - return; -} - -/* * hcu_get_slot */ u32 hcu_get_slot(void) |