diff options
Diffstat (limited to 'board/omap1610inn')
| -rw-r--r-- | board/omap1610inn/lowlevel_init.S | 16 | ||||
| -rw-r--r-- | board/omap1610inn/omap1610innovator.c | 4 |
2 files changed, 10 insertions, 10 deletions
diff --git a/board/omap1610inn/lowlevel_init.S b/board/omap1610inn/lowlevel_init.S index cc8347fa143..e4ed9f3c69e 100644 --- a/board/omap1610inn/lowlevel_init.S +++ b/board/omap1610inn/lowlevel_init.S @@ -58,7 +58,7 @@ lowlevel_init: str r1, [r0] /*------------------------------------------------------* - * Set up ARM CLM registers (IDLECT2) * + * Set up ARM CLM registers (IDLECT2) * *------------------------------------------------------*/ ldr r0, REG_ARM_IDLECT2 ldr r1, VAL_ARM_IDLECT2 @@ -123,7 +123,7 @@ lock_end: /*------------------------------------------------------* * Turn off the watchdog during init... * - *------------------------------------------------------*/ + *------------------------------------------------------*/ disable_wd: ldr r0, REG_WATCHDOG ldr r1, WATCHDOG_VAL1 @@ -156,13 +156,13 @@ watch2Wait: * and branch to appropriate initialization code. */ /* Load physical SDRAM base. */ - mov r0, #0x10000000 + mov r0, #0x10000000 /* Get current execution location. */ - mov r1, pc + mov r1, pc /* Compare. */ - cmp r1, r0 + cmp r1, r0 /* Skip over EMIF-fast initialization if running from SDRAM. */ - bge skip_sdram + bge skip_sdram /* * Delay for SDRAM initialization. @@ -170,7 +170,7 @@ watch2Wait: mov r3, #0x1800 /* value should be checked */ 3: subs r3, r3, #0x1 /* Decrement count */ - bne 3b + bne 3b /* @@ -270,7 +270,7 @@ common_tc: #ifdef CONFIG_H2_OMAP1610 /* inserting additional 2 clock cycle hold time for LAN */ ldr r0, REG_TC_EMIFS_CS1_ADVANCED - ldr r1, VAL_TC_EMIFS_CS1_ADVANCED + ldr r1, VAL_TC_EMIFS_CS1_ADVANCED str r1, [r0] #endif /* Start MPU Timer 1 */ diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c index 8dbe686a891..2e04ad4bddb 100644 --- a/board/omap1610inn/omap1610innovator.c +++ b/board/omap1610inn/omap1610innovator.c @@ -116,7 +116,7 @@ void flash__init (void) /************************************************************* Routine:ether__init Description: take the Ethernet controller out of reset and wait - for the EEPROM load to complete. + for the EEPROM load to complete. *************************************************************/ void ether__init (void) { @@ -162,7 +162,7 @@ int dram_init (void) /****************************************************** Routine: set_muxconf_regs Description: Setting up the configuration Mux registers - specific to the hardware + specific to the hardware *******************************************************/ void set_muxconf_regs (void) { |