diff options
Diffstat (limited to 'board/renesas/gose/gose.c')
-rw-r--r-- | board/renesas/gose/gose.c | 190 |
1 files changed, 58 insertions, 132 deletions
diff --git a/board/renesas/gose/gose.c b/board/renesas/gose/gose.c index 99d4ba6fd8b..c9209701dd3 100644 --- a/board/renesas/gose/gose.c +++ b/board/renesas/gose/gose.c @@ -46,13 +46,7 @@ void s_init(void) qos_init(); } -#define TMU0_MSTP125 (1 << 25) -#define SCIF0_MSTP721 (1 << 21) -#define ETHER_MSTP813 (1 << 13) - -#define SDHI0_MSTP314 (1 << 14) -#define SDHI1_MSTP312 (1 << 12) -#define SDHI2_MSTP311 (1 << 11) +#define TMU0_MSTP125 BIT(25) #define SD1CKCR 0xE6150078 #define SD2CKCR 0xE615026C @@ -60,143 +54,59 @@ void s_init(void) int board_early_init_f(void) { - /* TMU0 */ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); - /* SCIF0 */ - mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); - - /* ETHER */ - mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); - - /* SDHI */ - mstp_clrbits_le32(MSTPSR3, SMSTPCR3, - SDHI0_MSTP314 | SDHI1_MSTP312 | SDHI2_MSTP311); + /* + * SD0 clock is set to 97.5MHz by default. + * Set SD1 and SD2 to the 97.5MHz as well. + */ writel(SD_97500KHZ, SD1CKCR); writel(SD_97500KHZ, SD2CKCR); return 0; } -#define PUPR5 0xE6060114 -#define PUPR5_ETH 0x3FFC0000 -#define PUPR5_ETH_MAGIC (1 << 27) +#define ETHERNET_PHY_RESET 176 /* GPIO 5 22 */ int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - /* Init PFC controller */ - r8a7793_pinmux_init(); - - /* ETHER Enable */ - gpio_request(GPIO_FN_ETH_CRS_DV, NULL); - gpio_request(GPIO_FN_ETH_RX_ER, NULL); - gpio_request(GPIO_FN_ETH_RXD0, NULL); - gpio_request(GPIO_FN_ETH_RXD1, NULL); - gpio_request(GPIO_FN_ETH_LINK, NULL); - gpio_request(GPIO_FN_ETH_REFCLK, NULL); - gpio_request(GPIO_FN_ETH_MDIO, NULL); - gpio_request(GPIO_FN_ETH_TXD1, NULL); - gpio_request(GPIO_FN_ETH_TX_EN, NULL); - gpio_request(GPIO_FN_ETH_TXD0, NULL); - gpio_request(GPIO_FN_ETH_MDC, NULL); - gpio_request(GPIO_FN_IRQ0, NULL); - - mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH & ~PUPR5_ETH_MAGIC); - gpio_request(GPIO_GP_5_22, NULL); /* PHY_RST */ - mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH_MAGIC); - - gpio_direction_output(GPIO_GP_5_22, 0); - mdelay(20); - gpio_set_value(GPIO_GP_5_22, 1); - udelay(1); + /* Force ethernet PHY out of reset */ + gpio_request(ETHERNET_PHY_RESET, "phy_reset"); + gpio_direction_output(ETHERNET_PHY_RESET, 0); + mdelay(10); + gpio_direction_output(ETHERNET_PHY_RESET, 1); return 0; } -#define CXR24 0xEE7003C0 /* MAC address high register */ -#define CXR25 0xEE7003C8 /* MAC address low register */ - -int board_eth_init(bd_t *bis) +int dram_init(void) { - int ret = -ENODEV; - u32 val; - unsigned char enetaddr[6]; - -#ifdef CONFIG_SH_ETHER - ret = sh_eth_initialize(bis); - if (!eth_env_get_enetaddr("ethaddr", enetaddr)) - return ret; - - /* Set Mac address */ - val = enetaddr[0] << 24 | enetaddr[1] << 16 | - enetaddr[2] << 8 | enetaddr[3]; - writel(val, CXR24); + if (fdtdec_setup_memory_size() != 0) + return -EINVAL; - val = enetaddr[4] << 8 | enetaddr[5]; - writel(val, CXR25); -#endif - - return ret; + return 0; } -int board_mmc_init(bd_t *bis) +int dram_init_banksize(void) { - int ret = -ENODEV; - -#ifdef CONFIG_SH_SDHI - gpio_request(GPIO_FN_SD0_DATA0, NULL); - gpio_request(GPIO_FN_SD0_DATA1, NULL); - gpio_request(GPIO_FN_SD0_DATA2, NULL); - gpio_request(GPIO_FN_SD0_DATA3, NULL); - gpio_request(GPIO_FN_SD0_CLK, NULL); - gpio_request(GPIO_FN_SD0_CMD, NULL); - gpio_request(GPIO_FN_SD0_CD, NULL); - gpio_request(GPIO_FN_SD2_DATA0, NULL); - gpio_request(GPIO_FN_SD2_DATA1, NULL); - gpio_request(GPIO_FN_SD2_DATA2, NULL); - gpio_request(GPIO_FN_SD2_DATA3, NULL); - gpio_request(GPIO_FN_SD2_CLK, NULL); - gpio_request(GPIO_FN_SD2_CMD, NULL); - gpio_request(GPIO_FN_SD2_CD, NULL); - - /* SDHI 0 */ - gpio_request(GPIO_GP_7_17, NULL); - gpio_request(GPIO_GP_2_12, NULL); - gpio_direction_output(GPIO_GP_7_17, 1); /* power on */ - gpio_direction_output(GPIO_GP_2_12, 1); /* 1: 3.3V, 0: 1.8V */ - - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0, - SH_SDHI_QUIRK_16BIT_BUF); - if (ret) - return ret; - - /* SDHI 1 */ - gpio_request(GPIO_GP_7_18, NULL); - gpio_request(GPIO_GP_2_13, NULL); - gpio_direction_output(GPIO_GP_7_18, 1); /* power on */ - gpio_direction_output(GPIO_GP_2_13, 1); /* 1: 3.3V, 0: 1.8V */ - - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0); - if (ret) - return ret; - - /* SDHI 2 */ - gpio_request(GPIO_GP_7_19, NULL); - gpio_request(GPIO_GP_2_26, NULL); - gpio_direction_output(GPIO_GP_7_19, 1); /* power on */ - gpio_direction_output(GPIO_GP_2_26, 1); /* 1: 3.3V, 0: 1.8V */ + fdtdec_setup_memory_banksize(); - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 2, 0); -#endif - return ret; + return 0; } -int dram_init(void) +/* KSZ8041RNLI */ +#define PHY_CONTROL1 0x1E +#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE_ACK 0x4000 +int board_phy_config(struct phy_device *phydev) { - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1); + ret &= ~PHY_LED_MODE; + ret |= PHY_LED_MODE_ACK; + ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret); return 0; } @@ -207,22 +117,38 @@ const struct rmobile_sysinfo sysinfo = { void reset_cpu(ulong addr) { - u8 val; + struct udevice *dev; + const u8 pmic_bus = 6; + const u8 pmic_addr = 0x58; + u8 data; + int ret; + + ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev); + if (ret) + hang(); + + ret = dm_i2c_read(dev, 0x13, &data, 1); + if (ret) + hang(); + + data |= BIT(1); - i2c_set_bus_num(2); /* PowerIC connected to ch2 */ - i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); - val |= 0x02; - i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); + ret = dm_i2c_write(dev, 0x13, &data, 1); + if (ret) + hang(); } -static const struct sh_serial_platdata serial_platdata = { - .base = SCIF0_BASE, - .type = PORT_SCIF, - .clk = 14745600, - .clk_mode = EXT_CLK, -}; +enum env_location env_get_location(enum env_operation op, int prio) +{ + const u32 load_magic = 0xb33fc0de; -U_BOOT_DEVICE(gose_serials) = { - .name = "serial_sh", - .platdata = &serial_platdata, -}; + /* Block environment access if loaded using JTAG */ + if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) && + (op != ENVOP_INIT)) + return ENVL_UNKNOWN; + + if (prio) + return ENVL_UNKNOWN; + + return ENVL_SPI_FLASH; +} |