diff options
Diffstat (limited to 'board/renesas')
35 files changed, 0 insertions, 4084 deletions
diff --git a/board/renesas/MigoR/Kconfig b/board/renesas/MigoR/Kconfig deleted file mode 100644 index 25b170ac071..00000000000 --- a/board/renesas/MigoR/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MIGOR - -config SYS_BOARD - default "MigoR" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "MigoR" - -endif diff --git a/board/renesas/MigoR/MAINTAINERS b/board/renesas/MigoR/MAINTAINERS deleted file mode 100644 index 21ee5e27548..00000000000 --- a/board/renesas/MigoR/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MIGOR BOARD -#M: - -S: Maintained -F: board/renesas/MigoR/ -F: include/configs/MigoR.h -F: configs/MigoR_defconfig diff --git a/board/renesas/MigoR/Makefile b/board/renesas/MigoR/Makefile deleted file mode 100644 index 944a3bfe2cf..00000000000 --- a/board/renesas/MigoR/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007 -# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> -# -# Copyright (C) 2007 -# Kenati Technologies, Inc. -# -# board/MigoR/Makefile -# - -obj-y := migo_r.o -extra-y += lowlevel_init.o diff --git a/board/renesas/MigoR/lowlevel_init.S b/board/renesas/MigoR/lowlevel_init.S deleted file mode 100644 index 1b494faeb0e..00000000000 --- a/board/renesas/MigoR/lowlevel_init.S +++ /dev/null @@ -1,193 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2007-2008 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * Copyright (C) 2007 - * Kenati Technologies, Inc. - * - * board/MigoR/lowlevel_init.S - */ - -#include <config.h> - -#include <asm/processor.h> -#include <asm/macro.h> - -/* - * Board specific low level init code, called _very_ early in the - * startup sequence. Relocation to SDRAM has not happened yet, no - * stack is available, bss section has not been initialised, etc. - * - * (Note: As no stack is available, no subroutines can be called...). - */ - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - write32 CCR_A, CCR_D ! Address of Cache Control Register - ! Instruction Cache Invalidate - - write32 MMUCR_A, MMUCR_D ! Address of MMU Control Register - ! TI == TLB Invalidate bit - - write32 MSTPCR0_A, MSTPCR0_D ! Address of Power Control Register 0 - - write32 MSTPCR2_A, MSTPCR2_D ! Address of Power Control Register 2 - - write16 PFC_PULCR_A, PFC_PULCR_D - - write16 PFC_DRVCR_A, PFC_DRVCR_D - - write16 SBSCR_A, SBSCR_D - - write16 PSCR_A, PSCR_D - - write16 RWTCSR_A, RWTCSR_D_1 ! 0xA4520004 (Watchdog Control / Status Register) - ! 0xA507 -> timer_STOP / WDT_CLK = max - - write16 RWTCNT_A, RWTCNT_D ! 0xA4520000 (Watchdog Count Register) - ! 0x5A00 -> Clear - - write16 RWTCSR_A, RWTCSR_D_2 ! 0xA4520004 (Watchdog Control / Status Register) - ! 0xA504 -> timer_STOP / CLK = 500ms - - write32 DLLFRQ_A, DLLFRQ_D ! 20080115 - ! 20080115 - - write32 FRQCR_A, FRQCR_D ! 0xA4150000 Frequency control register - ! 20080115 - - write32 CCR_A, CCR_D_2 ! Address of Cache Control Register - ! ?? - -bsc_init: - write32 CMNCR_A, CMNCR_D - - write32 CS0BCR_A, CS0BCR_D - - write32 CS4BCR_A, CS4BCR_D - - write32 CS5ABCR_A, CS5ABCR_D - - write32 CS5BBCR_A, CS5BBCR_D - - write32 CS6ABCR_A, CS6ABCR_D - - write32 CS0WCR_A, CS0WCR_D - - write32 CS4WCR_A, CS4WCR_D - - write32 CS5AWCR_A, CS5AWCR_D - - write32 CS5BWCR_A, CS5BWCR_D - - write32 CS6AWCR_A, CS6AWCR_D - - ! SDRAM initialization - write32 SDCR_A, SDCR_D - - write32 SDWCR_A, SDWCR_D - - write32 SDPCR_A, SDPCR_D - - write32 RTCOR_A, RTCOR_D - - write32 RTCNT_A, RTCNT_D - - write32 RTCSR_A, RTCSR_D - - write32 RFCR_A, RFCR_D - - write8 SDMR3_A, SDMR3_D - - ! BL bit off (init = ON) (?!?) - - stc sr, r0 ! BL bit off(init=ON) - mov.l SR_MASK_D, r1 - and r1, r0 - ldc r0, sr - - rts - mov #0, r0 - - .align 4 - -CCR_A: .long CCR -MMUCR_A: .long MMUCR -MSTPCR0_A: .long MSTPCR0 -MSTPCR2_A: .long MSTPCR2 -PFC_PULCR_A: .long PULCR -PFC_DRVCR_A: .long DRVCR -SBSCR_A: .long SBSCR -PSCR_A: .long PSCR -RWTCSR_A: .long RWTCSR -RWTCNT_A: .long RWTCNT -FRQCR_A: .long FRQCR -PLLCR_A: .long PLLCR -DLLFRQ_A: .long DLLFRQ - -CCR_D: .long 0x00000800 -CCR_D_2: .long 0x00000103 -MMUCR_D: .long 0x00000004 -MSTPCR0_D: .long 0x00001001 -MSTPCR2_D: .long 0xffffffff -PFC_PULCR_D: .long 0x6000 -PFC_DRVCR_D: .long 0x0464 -FRQCR_D: .long 0x07033639 -PLLCR_D: .long 0x00005000 -DLLFRQ_D: .long 0x000004F6 - -CMNCR_A: .long CMNCR -CMNCR_D: .long 0x0000001B -CS0BCR_A: .long CS0BCR -CS0BCR_D: .long 0x24920400 -CS4BCR_A: .long CS4BCR -CS4BCR_D: .long 0x00003400 -CS5ABCR_A: .long CS5ABCR -CS5ABCR_D: .long 0x24920400 -CS5BBCR_A: .long CS5BBCR -CS5BBCR_D: .long 0x24920400 -CS6ABCR_A: .long CS6ABCR -CS6ABCR_D: .long 0x24920400 - -CS0WCR_A: .long CS0WCR -CS0WCR_D: .long 0x00000380 -CS4WCR_A: .long CS4WCR -CS4WCR_D: .long 0x00110080 -CS5AWCR_A: .long CS5AWCR -CS5AWCR_D: .long 0x00000300 -CS5BWCR_A: .long CS5BWCR -CS5BWCR_D: .long 0x00000300 -CS6AWCR_A: .long CS6AWCR -CS6AWCR_D: .long 0x00000300 - -SDCR_A: .long SBSC_SDCR -SDCR_D: .long 0x80160809 -SDWCR_A: .long SBSC_SDWCR -SDWCR_D: .long 0x0014450C -SDPCR_A: .long SBSC_SDPCR -SDPCR_D: .long 0x00000087 -RTCOR_A: .long SBSC_RTCOR -RTCNT_A: .long SBSC_RTCNT -RTCNT_D: .long 0xA55A0012 -RTCOR_D: .long 0xA55A001C -RTCSR_A: .long SBSC_RTCSR -RFCR_A: .long SBSC_RFCR -RFCR_D: .long 0xA55A0221 -RTCSR_D: .long 0xA55A009a -SDMR3_A: .long 0xFE581180 -SDMR3_D: .long 0x0 - -SR_MASK_D: .long 0xEFFFFF0F - - .align 2 - -SBSCR_D: .word 0x0044 -PSCR_D: .word 0x0000 -RWTCSR_D_1: .word 0xA507 -RWTCSR_D_2: .word 0xA504 -RWTCNT_D: .word 0x5A00 diff --git a/board/renesas/MigoR/migo_r.c b/board/renesas/MigoR/migo_r.c deleted file mode 100644 index f2f4c657534..00000000000 --- a/board/renesas/MigoR/migo_r.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2007 - * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * Copyright (C) 2007 - * Kenati Technologies, Inc. - * - * board/MigoR/migo_r.c - */ - -#include <common.h> -#include <init.h> -#include <net.h> -#include <netdev.h> -#include <asm/io.h> -#include <asm/processor.h> - -int checkboard(void) -{ - puts("BOARD: Renesas MigoR\n"); - return 0; -} - -int board_init(void) -{ - return 0; -} - -void led_set_state (unsigned short value) -{ -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(struct bd_info *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/renesas/r7780mp/Kconfig b/board/renesas/r7780mp/Kconfig deleted file mode 100644 index 050cc4cc0f6..00000000000 --- a/board/renesas/r7780mp/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_R7780MP - -config SYS_BOARD - default "r7780mp" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "r7780mp" - -endif diff --git a/board/renesas/r7780mp/MAINTAINERS b/board/renesas/r7780mp/MAINTAINERS deleted file mode 100644 index 56ec21fd32f..00000000000 --- a/board/renesas/r7780mp/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -R7780MP BOARD -M: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> -M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> -S: Maintained -F: board/renesas/r7780mp/ -F: include/configs/r7780mp.h -F: configs/r7780mp_defconfig diff --git a/board/renesas/r7780mp/Makefile b/board/renesas/r7780mp/Makefile deleted file mode 100644 index 0a387db35d2..00000000000 --- a/board/renesas/r7780mp/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007,2008 Nobuhiro Iwamatsu -# -# board/r7780mp/Makefile -# - -obj-y := r7780mp.o -extra-y += lowlevel_init.o diff --git a/board/renesas/r7780mp/lowlevel_init.S b/board/renesas/r7780mp/lowlevel_init.S deleted file mode 100644 index 7be1a1bf070..00000000000 --- a/board/renesas/r7780mp/lowlevel_init.S +++ /dev/null @@ -1,356 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2007,2008 Nobuhiro Iwamatsu - * - * u-boot/board/r7780mp/lowlevel_init.S - */ - -#include <config.h> -#include <asm/processor.h> -#include <asm/macro.h> - -/* - * Board specific low level init code, called _very_ early in the - * startup sequence. Relocation to SDRAM has not happened yet, no - * stack is available, bss section has not been initialised, etc. - * - * (Note: As no stack is available, no subroutines can be called...). - */ - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - - write32 CCR_A, CCR_D /* Address of Cache Control Register */ - /* Instruction Cache Invalidate */ - - write32 FRQCR_A, FRQCR_D /* Frequency control register */ - - /* pin_multi_setting */ - write32 BBG_PMMR_A, BBG_PMMR_D_PMSR1 - - write32 BBG_PMSR1_A, BBG_PMSR1_D - - write32 BBG_PMMR_A, BBG_PMMR_D_PMSR2 - - write32 BBG_PMSR2_A, BBG_PMSR2_D - - write32 BBG_PMMR_A, BBG_PMMR_D_PMSR3 - - write32 BBG_PMSR3_A, BBG_PMSR3_D - - write32 BBG_PMMR_A, BBG_PMMR_D_PMSR4 - - write32 BBG_PMSR4_A, BBG_PMSR4_D - - write32 BBG_PMMR_A, BBG_PMMR_D_PMSRG - - write32 BBG_PMSRG_A, BBG_PMSRG_D - - /* cpg_setting */ - write32 FRQCR_A, FRQCR_D - - write32 DLLCSR_A, DLLCSR_D - - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop - - /* wait 200us */ - mov.l REPEAT0_R3, r3 - mov #0, r2 -repeat0: - add #1, r2 - cmp/hs r3, r2 - bf repeat0 - nop - - /* bsc_setting */ - write32 MMSELR_A, MMSELR_D - - write32 BCR_A, BCR_D - - write32 CS0BCR_A, CS0BCR_D - - write32 CS1BCR_A, CS1BCR_D - - write32 CS2BCR_A, CS2BCR_D - - write32 CS4BCR_A, CS4BCR_D - - write32 CS5BCR_A, CS5BCR_D - - write32 CS6BCR_A, CS6BCR_D - - write32 CS0WCR_A, CS0WCR_D - - write32 CS1WCR_A, CS1WCR_D - - write32 CS2WCR_A, CS2WCR_D - - write32 CS4WCR_A, CS4WCR_D - - write32 CS5WCR_A, CS5WCR_D - - write32 CS6WCR_A, CS6WCR_D - - write32 CS5PCR_A, CS5PCR_D - - write32 CS6PCR_A, CS6PCR_D - - /* ddr_setting */ - /* wait 200us */ - mov.l REPEAT0_R3, r3 - mov #0, r2 -repeat1: - add #1, r2 - cmp/hs r3, r2 - bf repeat1 - nop - - mov.l MIM_U_A, r0 - mov.l MIM_U_D, r1 - synco - mov.l r1, @r0 - synco - - mov.l MIM_L_A, r0 - mov.l MIM_L_D0, r1 - synco - mov.l r1, @r0 - synco - - mov.l STR_L_A, r0 - mov.l STR_L_D, r1 - synco - mov.l r1, @r0 - synco - - mov.l SDR_L_A, r0 - mov.l SDR_L_D, r1 - synco - mov.l r1, @r0 - synco - - nop - nop - nop - nop - - mov.l SCR_L_A, r0 - mov.l SCR_L_D0, r1 - synco - mov.l r1, @r0 - synco - - mov.l SCR_L_A, r0 - mov.l SCR_L_D1, r1 - synco - mov.l r1, @r0 - synco - - nop - nop - nop - - mov.l EMRS_A, r0 - mov.l EMRS_D, r1 - synco - mov.l r1, @r0 - synco - - nop - nop - nop - - mov.l MRS1_A, r0 - mov.l MRS1_D, r1 - synco - mov.l r1, @r0 - synco - - nop - nop - nop - - mov.l SCR_L_A, r0 - mov.l SCR_L_D2, r1 - synco - mov.l r1, @r0 - synco - - nop - nop - nop - - mov.l SCR_L_A, r0 - mov.l SCR_L_D3, r1 - synco - mov.l r1, @r0 - synco - - nop - nop - nop - - mov.l SCR_L_A, r0 - mov.l SCR_L_D4, r1 - synco - mov.l r1, @r0 - synco - - nop - nop - nop - - mov.l MRS2_A, r0 - mov.l MRS2_D, r1 - synco - mov.l r1, @r0 - synco - - nop - nop - nop - - mov.l SCR_L_A, r0 - mov.l SCR_L_D5, r1 - synco - mov.l r1, @r0 - synco - - /* wait 200us */ - mov.l REPEAT0_R1, r3 - mov #0, r2 -repeat2: - add #1, r2 - cmp/hs r3, r2 - bf repeat2 - - synco - - mov.l MIM_L_A, r0 - mov.l MIM_L_D1, r1 - synco - mov.l r1, @r0 - synco - - rts - nop - .align 4 - -RWTCSR_D_1: .word 0xA507 -RWTCSR_D_2: .word 0xA507 -RWTCNT_D: .word 0x5A00 - .align 2 - -BBG_PMMR_A: .long 0xFF800010 -BBG_PMSR1_A: .long 0xFF800014 -BBG_PMSR2_A: .long 0xFF800018 -BBG_PMSR3_A: .long 0xFF80001C -BBG_PMSR4_A: .long 0xFF800020 -BBG_PMSRG_A: .long 0xFF800024 - -BBG_PMMR_D_PMSR1: .long 0xffffbffd -BBG_PMSR1_D: .long 0x00004002 -BBG_PMMR_D_PMSR2: .long 0xfc21a7ff -BBG_PMSR2_D: .long 0x03de5800 -BBG_PMMR_D_PMSR3: .long 0xfffffff8 -BBG_PMSR3_D: .long 0x00000007 -BBG_PMMR_D_PMSR4: .long 0xdffdfff9 -BBG_PMSR4_D: .long 0x20020006 -BBG_PMMR_D_PMSRG: .long 0xffffffff -BBG_PMSRG_D: .long 0x00000000 - -FRQCR_A: .long FRQCR -DLLCSR_A: .long 0xffc40010 -FRQCR_D: .long 0x40233035 -DLLCSR_D: .long 0x00000000 - -/* for DDR-SDRAM */ -MIM_U_A: .long MIM_1 -MIM_L_A: .long MIM_2 -SCR_U_A: .long SCR_1 -SCR_L_A: .long SCR_2 -STR_U_A: .long STR_1 -STR_L_A: .long STR_2 -SDR_U_A: .long SDR_1 -SDR_L_A: .long SDR_2 - -EMRS_A: .long 0xFEC02000 -MRS1_A: .long 0xFEC00B08 -MRS2_A: .long 0xFEC00308 - -MIM_U_D: .long 0x00004000 -MIM_L_D0: .long 0x03e80009 -MIM_L_D1: .long 0x03e80209 -SCR_L_D0: .long 0x3 -SCR_L_D1: .long 0x2 -SCR_L_D2: .long 0x2 -SCR_L_D3: .long 0x4 -SCR_L_D4: .long 0x4 -SCR_L_D5: .long 0x0 -STR_L_D: .long 0x000f0000 -SDR_L_D: .long 0x00000400 -EMRS_D: .long 0x0 -MRS1_D: .long 0x0 -MRS2_D: .long 0x0 - -/* Cache Controller */ -CCR_A: .long CCR -MMUCR_A: .long MMUCR -RWTCNT_A: .long WTCNT - -CCR_D: .long 0x0000090b -CCR_D_2: .long 0x00000103 -MMUCR_D: .long 0x00000004 -MSTPCR0_D: .long 0x00001001 -MSTPCR2_D: .long 0xffffffff - -/* local Bus State Controller */ -MMSELR_A: .long MMSELR -BCR_A: .long BCR -CS0BCR_A: .long CS0BCR -CS1BCR_A: .long CS1BCR -CS2BCR_A: .long CS2BCR -CS4BCR_A: .long CS4BCR -CS5BCR_A: .long CS5BCR -CS6BCR_A: .long CS6BCR -CS0WCR_A: .long CS0WCR -CS1WCR_A: .long CS1WCR -CS2WCR_A: .long CS2WCR -CS4WCR_A: .long CS4WCR -CS5WCR_A: .long CS5WCR -CS6WCR_A: .long CS6WCR -CS5PCR_A: .long CS5PCR -CS6PCR_A: .long CS6PCR - -MMSELR_D: .long 0xA5A50003 -BCR_D: .long 0x00000000 -CS0BCR_D: .long 0x77777770 -CS1BCR_D: .long 0x77777670 -CS2BCR_D: .long 0x77777770 -CS4BCR_D: .long 0x77777770 -CS5BCR_D: .long 0x77777670 -CS6BCR_D: .long 0x77777770 -CS0WCR_D: .long 0x00020006 -CS1WCR_D: .long 0x00232304 -CS2WCR_D: .long 0x7777770F -CS4WCR_D: .long 0x7777770F -CS5WCR_D: .long 0x00101006 -CS6WCR_D: .long 0x77777703 -CS5PCR_D: .long 0x77000000 -CS6PCR_D: .long 0x77000000 - -REPEAT0_R3: .long 0x00002000 -REPEAT0_R1: .long 0x0000200 diff --git a/board/renesas/r7780mp/r7780mp.c b/board/renesas/r7780mp/r7780mp.c deleted file mode 100644 index 422381ca780..00000000000 --- a/board/renesas/r7780mp/r7780mp.c +++ /dev/null @@ -1,64 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> - */ - -#include <common.h> -#include <ide.h> -#include <init.h> -#include <net.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/pci.h> -#include <netdev.h> -#include "r7780mp.h" - -int checkboard(void) -{ -#if defined(CONFIG_R7780MP) - puts("BOARD: Renesas Solutions R7780MP\n"); -#else - puts("BOARD: Renesas Solutions R7780RP\n"); -#endif - return 0; -} - -int board_init(void) -{ - /* SCIF Enable */ - writew(0x0, PHCR); - - return 0; -} - -void led_set_state(unsigned short value) -{ - -} - -void ide_set_reset(int idereset) -{ - /* if reset = 1 IDE reset will be asserted */ - if (idereset) { - writew(0x432, FPGA_CFCTL); -#if defined(CONFIG_R7780MP) - writew(inw(FPGA_CFPOW)|0x01, FPGA_CFPOW); -#else - writew(inw(FPGA_CFPOW)|0x02, FPGA_CFPOW); -#endif - writew(0x01, FPGA_CFCDINTCLR); - } -} - -static struct pci_controller hose; -void pci_init_board(void) -{ - pci_sh7780_init(&hose); -} - -int board_eth_init(struct bd_info *bis) -{ - /* return >= 0 if a chip is found, the board's AX88796L is n2k-based */ - return ne2k_register() + pci_eth_init(bis); -} diff --git a/board/renesas/r7780mp/r7780mp.h b/board/renesas/r7780mp/r7780mp.h deleted file mode 100644 index cce66bc4d2a..00000000000 --- a/board/renesas/r7780mp/r7780mp.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2007 Nobuhiro Iwamatsu - * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> - * - * u-boot/board/r7780mp/r7780mp.h - */ - -#ifndef _BOARD_R7780MP_R7780MP_H_ -#define _BOARD_R7780MP_R7780MP_H_ - -/* R7780MP's FPGA register map */ -#define FPGA_BASE 0xa4000000 -#define FPGA_IRLMSK (FPGA_BASE + 0x00) -#define FPGA_IRLMON (FPGA_BASE + 0x02) -#define FPGA_IRLPRI1 (FPGA_BASE + 0x04) -#define FPGA_IRLPRI2 (FPGA_BASE + 0x06) -#define FPGA_IRLPRI3 (FPGA_BASE + 0x08) -#define FPGA_IRLPRI4 (FPGA_BASE + 0x0A) -#define FPGA_RSTCTL (FPGA_BASE + 0x0C) -#define FPGA_PCIBD (FPGA_BASE + 0x0E) -#define FPGA_PCICD (FPGA_BASE + 0x10) -#define FPGA_EXTGIO (FPGA_BASE + 0x16) -#define FPGA_IVDRMON (FPGA_BASE + 0x18) -#define FPGA_IVDRCR (FPGA_BASE + 0x1A) -#define FPGA_OBLED (FPGA_BASE + 0x1C) -#define FPGA_OBSW (FPGA_BASE + 0x1E) -#define FPGA_TPCTL (FPGA_BASE + 0x100) -#define FPGA_TPDCKCTL (FPGA_BASE + 0x102) -#define FPGA_TPCLR (FPGA_BASE + 0x104) -#define FPGA_TPXPOS (FPGA_BASE + 0x106) -#define FPGA_TPYPOS (FPGA_BASE + 0x108) -#define FPGA_DBSW (FPGA_BASE + 0x200) -#define FPGA_VERSION (FPGA_BASE + 0x700) -#define FPGA_CFCTL (FPGA_BASE + 0x300) -#define FPGA_CFPOW (FPGA_BASE + 0x302) -#define FPGA_CFCDINTCLR (FPGA_BASE + 0x304) -#define FPGA_PMR (FPGA_BASE + 0x900) - -#endif /* _BOARD_R7780RP_R7780RP_H_ */ diff --git a/board/renesas/sh7752evb/Kconfig b/board/renesas/sh7752evb/Kconfig deleted file mode 100644 index 7f40888336e..00000000000 --- a/board/renesas/sh7752evb/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SH7752EVB - -config SYS_BOARD - default "sh7752evb" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "sh7752evb" - -endif diff --git a/board/renesas/sh7752evb/MAINTAINERS b/board/renesas/sh7752evb/MAINTAINERS deleted file mode 100644 index 9840477d7dd..00000000000 --- a/board/renesas/sh7752evb/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SH7752EVB BOARD -#M: - -S: Maintained -F: board/renesas/sh7752evb/ -F: include/configs/sh7752evb.h -F: configs/sh7752evb_defconfig diff --git a/board/renesas/sh7752evb/Makefile b/board/renesas/sh7752evb/Makefile deleted file mode 100644 index 658dc3bc6de..00000000000 --- a/board/renesas/sh7752evb/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2012 Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> -# - -obj-y := sh7752evb.o spi-boot.o -extra-y += lowlevel_init.o diff --git a/board/renesas/sh7752evb/lowlevel_init.S b/board/renesas/sh7752evb/lowlevel_init.S deleted file mode 100644 index 0f7b643ad8f..00000000000 --- a/board/renesas/sh7752evb/lowlevel_init.S +++ /dev/null @@ -1,445 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#include <config.h> -#include <asm/processor.h> -#include <asm/macro.h> - -.macro or32, addr, data - mov.l \addr, r1 - mov.l \data, r0 - mov.l @r1, r2 - or r2, r0 - mov.l r0, @r1 -.endm - -.macro wait_DBCMD - mov.l DBWAIT_A, r0 - mov.l @r0, r1 -.endm - - .global lowlevel_init - .section .spiboot1.text - .align 2 - -lowlevel_init: - /*------- GPIO -------*/ - write16 PDCR_A, PDCR_D ! SPI0 - write16 PGCR_A, PGCR_D ! SPI0, GETHER MDIO gate(PTG1) - write16 PJCR_A, PJCR_D ! SCIF4 - write16 PTCR_A, PTCR_D ! STATUS - write16 PSEL1_A, PSEL1_D ! SPI0 - write16 PSEL2_A, PSEL2_D ! SPI0 - write16 PSEL5_A, PSEL5_D ! STATUS - - bra exit_gpio - nop - - .align 2 - -/*------- GPIO -------*/ -PDCR_A: .long 0xffec0006 -PGCR_A: .long 0xffec000c -PJCR_A: .long 0xffec0012 -PTCR_A: .long 0xffec0026 -PSEL1_A: .long 0xffec0072 -PSEL2_A: .long 0xffec0074 -PSEL5_A: .long 0xffec007a - -PDCR_D: .long 0x0000 -PGCR_D: .long 0x0004 -PJCR_D: .long 0x0000 -PTCR_D: .long 0x0000 -PSEL1_D: .long 0x0000 -PSEL2_D: .long 0x3000 -PSEL5_D: .long 0x0ffc - - .align 2 - -exit_gpio: - mov #0, r14 - mova 2f, r0 - mov.l PC_MASK, r1 - tst r0, r1 - bf 2f - - bra exit_pmb - nop - - .align 2 - -/* If CPU runs on SDRAM (PC=0x5???????) or not. */ -PC_MASK: .long 0x20000000 - -2: - mov #1, r14 - - mov.l EXPEVT_A, r0 - mov.l @r0, r0 - mov.l EXPEVT_POWER_ON_RESET, r1 - cmp/eq r0, r1 - bt 1f - - /* - * If EXPEVT value is manual reset or tlb multipul-hit, - * initialization of DDR3IF is not necessary. - */ - bra exit_ddr - nop - -1: - /*------- Reset -------*/ - write32 MRSTCR0_A, MRSTCR0_D - write32 MRSTCR1_A, MRSTCR1_D - - /* For Core Reset */ - mov.l DBACEN_A, r0 - mov.l @r0, r0 - cmp/eq #0, r0 - bt 3f - - /* - * If DBACEN == 1(DBSC was already enabled), we have to avoid the - * initialization of DDR3-SDRAM. - */ - bra exit_ddr - nop - -3: - /*------- DDR3IF -------*/ - /* oscillation stabilization time */ - wait_timer WAIT_OSC_TIME - - /* step 3 */ - write32 DBCMD_A, DBCMD_RSTL_VAL - wait_timer WAIT_30US - - /* step 4 */ - write32 DBCMD_A, DBCMD_PDEN_VAL - - /* step 5 */ - write32 DBKIND_A, DBKIND_D - - /* step 6 */ - write32 DBCONF_A, DBCONF_D - write32 DBTR0_A, DBTR0_D - write32 DBTR1_A, DBTR1_D - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D - write32 DBTR4_A, DBTR4_D - write32 DBTR5_A, DBTR5_D - write32 DBTR6_A, DBTR6_D - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D - write32 DBTR13_A, DBTR13_D - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D - write32 DBTR17_A, DBTR17_D - write32 DBTR18_A, DBTR18_D - write32 DBTR19_A, DBTR19_D - write32 DBRNK0_A, DBRNK0_D - - /* step 7 */ - write32 DBPDCNT3_A, DBPDCNT3_D - - /* step 8 */ - write32 DBPDCNT1_A, DBPDCNT1_D - write32 DBPDCNT2_A, DBPDCNT2_D - write32 DBPDLCK_A, DBPDLCK_D - write32 DBPDRGA_A, DBPDRGA_D - write32 DBPDRGD_A, DBPDRGD_D - - /* step 9 */ - wait_timer WAIT_30US - - /* step 10 */ - write32 DBPDCNT0_A, DBPDCNT0_D - - /* step 11 */ - wait_timer WAIT_30US - wait_timer WAIT_30US - - /* step 12 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - wait_DBCMD - - /* step 13 */ - write32 DBCMD_A, DBCMD_RSTH_VAL - wait_DBCMD - - /* step 14 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - - /* step 15 */ - write32 DBCMD_A, DBCMD_PDXT_VAL - - /* step 16 */ - write32 DBCMD_A, DBCMD_MRS2_VAL - - /* step 17 */ - write32 DBCMD_A, DBCMD_MRS3_VAL - - /* step 18 */ - write32 DBCMD_A, DBCMD_MRS1_VAL - - /* step 19 */ - write32 DBCMD_A, DBCMD_MRS0_VAL - - /* step 20 */ - write32 DBCMD_A, DBCMD_ZQCL_VAL - - write32 DBCMD_A, DBCMD_REF_VAL - write32 DBCMD_A, DBCMD_REF_VAL - wait_DBCMD - - /* step 21 */ - write32 DBADJ0_A, DBADJ0_D - write32 DBADJ1_A, DBADJ1_D - write32 DBADJ2_A, DBADJ2_D - - /* step 22 */ - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D - write32 DBRFCNF2_A, DBRFCNF2_D - - /* step 23 */ - write32 DBCALCNF_A, DBCALCNF_D - - /* step 24 */ - write32 DBRFEN_A, DBRFEN_D - write32 DBCMD_A, DBCMD_SRXT_VAL - - /* step 25 */ - write32 DBACEN_A, DBACEN_D - - /* step 26 */ - wait_DBCMD - - bra exit_ddr - nop - - .align 2 - -EXPEVT_A: .long 0xff000024 -EXPEVT_POWER_ON_RESET: .long 0x00000000 - -/*------- Reset -------*/ -MRSTCR0_A: .long 0xffd50030 -MRSTCR0_D: .long 0xfe1ffe7f -MRSTCR1_A: .long 0xffd50034 -MRSTCR1_D: .long 0xfff3ffff - -/*------- DDR3IF -------*/ -DBCMD_A: .long 0xfe800018 -DBKIND_A: .long 0xfe800020 -DBCONF_A: .long 0xfe800024 -DBTR0_A: .long 0xfe800040 -DBTR1_A: .long 0xfe800044 -DBTR2_A: .long 0xfe800048 -DBTR3_A: .long 0xfe800050 -DBTR4_A: .long 0xfe800054 -DBTR5_A: .long 0xfe800058 -DBTR6_A: .long 0xfe80005c -DBTR7_A: .long 0xfe800060 -DBTR8_A: .long 0xfe800064 -DBTR9_A: .long 0xfe800068 -DBTR10_A: .long 0xfe80006c -DBTR11_A: .long 0xfe800070 -DBTR12_A: .long 0xfe800074 -DBTR13_A: .long 0xfe800078 -DBTR14_A: .long 0xfe80007c -DBTR15_A: .long 0xfe800080 -DBTR16_A: .long 0xfe800084 -DBTR17_A: .long 0xfe800088 -DBTR18_A: .long 0xfe80008c -DBTR19_A: .long 0xfe800090 -DBRNK0_A: .long 0xfe800100 -DBPDCNT0_A: .long 0xfe800200 -DBPDCNT1_A: .long 0xfe800204 -DBPDCNT2_A: .long 0xfe800208 -DBPDCNT3_A: .long 0xfe80020c -DBPDLCK_A: .long 0xfe800280 -DBPDRGA_A: .long 0xfe800290 -DBPDRGD_A: .long 0xfe8002a0 -DBADJ0_A: .long 0xfe8000c0 -DBADJ1_A: .long 0xfe8000c4 -DBADJ2_A: .long 0xfe8000c8 -DBRFCNF0_A: .long 0xfe8000e0 -DBRFCNF1_A: .long 0xfe8000e4 -DBRFCNF2_A: .long 0xfe8000e8 -DBCALCNF_A: .long 0xfe8000f4 -DBRFEN_A: .long 0xfe800014 -DBACEN_A: .long 0xfe800010 -DBWAIT_A: .long 0xfe80001c - -WAIT_OSC_TIME: .long 6000 -WAIT_30US: .long 13333 - -DBCMD_RSTL_VAL: .long 0x20000000 -DBCMD_PDEN_VAL: .long 0x1000d73c -DBCMD_WAIT_VAL: .long 0x0000d73c -DBCMD_RSTH_VAL: .long 0x2100d73c -DBCMD_PDXT_VAL: .long 0x110000c8 -DBCMD_MRS0_VAL: .long 0x28000930 -DBCMD_MRS1_VAL: .long 0x29000004 -DBCMD_MRS2_VAL: .long 0x2a000008 -DBCMD_MRS3_VAL: .long 0x2b000000 -DBCMD_ZQCL_VAL: .long 0x03000200 -DBCMD_REF_VAL: .long 0x0c000000 -DBCMD_SRXT_VAL: .long 0x19000000 -DBKIND_D: .long 0x00000007 -DBCONF_D: .long 0x0f030a01 -DBTR0_D: .long 0x00000007 -DBTR1_D: .long 0x00000006 -DBTR2_D: .long 0x00000000 -DBTR3_D: .long 0x00000007 -DBTR4_D: .long 0x00070007 -DBTR5_D: .long 0x0000001b -DBTR6_D: .long 0x00000014 -DBTR7_D: .long 0x00000005 -DBTR8_D: .long 0x00000015 -DBTR9_D: .long 0x00000006 -DBTR10_D: .long 0x00000008 -DBTR11_D: .long 0x00000007 -DBTR12_D: .long 0x0000000e -DBTR13_D: .long 0x00000056 -DBTR14_D: .long 0x00000006 -DBTR15_D: .long 0x00000004 -DBTR16_D: .long 0x00150002 -DBTR17_D: .long 0x000c0017 -DBTR18_D: .long 0x00000200 -DBTR19_D: .long 0x00000040 -DBRNK0_D: .long 0x00000001 -DBPDCNT0_D: .long 0x00000001 -DBPDCNT1_D: .long 0x00000001 -DBPDCNT2_D: .long 0x00000000 -DBPDCNT3_D: .long 0x00004010 -DBPDLCK_D: .long 0x0000a55a -DBPDRGA_D: .long 0x00000028 -DBPDRGD_D: .long 0x00017100 - -DBADJ0_D: .long 0x00000000 -DBADJ1_D: .long 0x00000000 -DBADJ2_D: .long 0x18061806 -DBRFCNF0_D: .long 0x000001ff -DBRFCNF1_D: .long 0x08001000 -DBRFCNF2_D: .long 0x00000000 -DBCALCNF_D: .long 0x0000ffff -DBRFEN_D: .long 0x00000001 -DBACEN_D: .long 0x00000001 - - .align 2 -exit_ddr: -#if defined(CONFIG_SH_32BIT) - /*------- set PMB -------*/ - write32 PASCR_A, PASCR_29BIT_D - write32 MMUCR_A, MMUCR_D - - /***************************************************************** - * ent virt phys v sz c wt - * 0 0xa0000000 0x00000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - */ - write32 PMB_ADDR_SPIBOOT_A, PMB_ADDR_SPIBOOT_D - write32 PMB_DATA_SPIBOOT_A, PMB_DATA_SPIBOOT_D - write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D - write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D - write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D - write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D - - write32 PMB_ADDR_ENTRY2, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY3, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY4, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY6, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY7, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY8, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY9, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY10, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY11, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY12, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY13, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY14, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY15, PMB_ADDR_NOT_USE_D - - write32 PASCR_A, PASCR_INIT - mov.l DUMMY_ADDR, r0 - icbi @r0 -#endif /* if defined(CONFIG_SH_32BIT) */ - -exit_pmb: - /* CPU is running on ILRAM? */ - mov r14, r0 - tst #1, r0 - bt 1f - - mov.l _stack_ilram, r15 - mov.l _spiboot_main, r0 -100: bsrf r0 - nop - - .align 2 -_spiboot_main: .long (spiboot_main - (100b + 4)) -_stack_ilram: .long 0xe5204000 - -1: - write32 CCR_A, CCR_D - - rts - nop - - .align 2 - -#if defined(CONFIG_SH_32BIT) -/*------- set PMB -------*/ -PMB_ADDR_SPIBOOT_A: .long PMB_ADDR_BASE(0) -PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(1) -PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(5) -PMB_ADDR_ENTRY2: .long PMB_ADDR_BASE(2) -PMB_ADDR_ENTRY3: .long PMB_ADDR_BASE(3) -PMB_ADDR_ENTRY4: .long PMB_ADDR_BASE(4) -PMB_ADDR_ENTRY6: .long PMB_ADDR_BASE(6) -PMB_ADDR_ENTRY7: .long PMB_ADDR_BASE(7) -PMB_ADDR_ENTRY8: .long PMB_ADDR_BASE(8) -PMB_ADDR_ENTRY9: .long PMB_ADDR_BASE(9) -PMB_ADDR_ENTRY10: .long PMB_ADDR_BASE(10) -PMB_ADDR_ENTRY11: .long PMB_ADDR_BASE(11) -PMB_ADDR_ENTRY12: .long PMB_ADDR_BASE(12) -PMB_ADDR_ENTRY13: .long PMB_ADDR_BASE(13) -PMB_ADDR_ENTRY14: .long PMB_ADDR_BASE(14) -PMB_ADDR_ENTRY15: .long PMB_ADDR_BASE(15) - -PMB_ADDR_SPIBOOT_D: .long mk_pmb_addr_val(0xa0) -PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88) -PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8) -PMB_ADDR_NOT_USE_D: .long 0x00000000 - -PMB_DATA_SPIBOOT_A: .long PMB_DATA_BASE(0) -PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(1) -PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(5) - -/* ppn ub v s1 s0 c wt */ -PMB_DATA_SPIBOOT_D: .long mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1) -PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1) -PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1) - -PASCR_A: .long 0xff000070 -DUMMY_ADDR: .long 0xa0000000 -PASCR_29BIT_D: .long 0x00000000 -PASCR_INIT: .long 0x80000080 -MMUCR_A: .long 0xff000010 -MMUCR_D: .long 0x00000004 /* clear ITLB */ -#endif /* CONFIG_SH_32BIT */ - -CCR_A: .long CCR -CCR_D: .long CCR_CACHE_INIT diff --git a/board/renesas/sh7752evb/sh7752evb.c b/board/renesas/sh7752evb/sh7752evb.c deleted file mode 100644 index 522b4bd610d..00000000000 --- a/board/renesas/sh7752evb/sh7752evb.c +++ /dev/null @@ -1,313 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#include <common.h> -#include <command.h> -#include <env.h> -#include <flash.h> -#include <init.h> -#include <malloc.h> -#include <net.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/mmc.h> -#include <spi.h> -#include <spi_flash.h> -#include <linux/delay.h> - -int checkboard(void) -{ - puts("BOARD: SH7752 evaluation board (R0P7752C00000RZ)\n"); - - return 0; -} - -static void init_gpio(void) -{ - struct gpio_regs *gpio = GPIO_BASE; - struct sermux_regs *sermux = SERMUX_BASE; - - /* GPIO */ - writew(0x0000, &gpio->pacr); /* GETHER */ - writew(0x0001, &gpio->pbcr); /* INTC */ - writew(0x0000, &gpio->pccr); /* PWMU, INTC */ - writew(0xeaff, &gpio->pecr); /* GPIO */ - writew(0x0000, &gpio->pfcr); /* WDT */ - writew(0x0000, &gpio->phcr); /* SPI1 */ - writew(0x0000, &gpio->picr); /* SDHI */ - writew(0x0003, &gpio->pkcr); /* SerMux */ - writew(0x0000, &gpio->plcr); /* SerMux */ - writew(0x0000, &gpio->pmcr); /* RIIC */ - writew(0x0000, &gpio->pncr); /* USB, SGPIO */ - writew(0x0000, &gpio->pocr); /* SGPIO */ - writew(0xd555, &gpio->pqcr); /* GPIO */ - writew(0x0000, &gpio->prcr); /* RIIC */ - writew(0x0000, &gpio->pscr); /* RIIC */ - writeb(0x00, &gpio->pudr); - writew(0x5555, &gpio->pucr); /* Debug LED */ - writew(0x0000, &gpio->pvcr); /* RSPI */ - writew(0x0000, &gpio->pwcr); /* EVC */ - writew(0x0000, &gpio->pxcr); /* LBSC */ - writew(0x0000, &gpio->pycr); /* LBSC */ - writew(0x0000, &gpio->pzcr); /* eMMC */ - writew(0xfe00, &gpio->psel0); - writew(0xff00, &gpio->psel3); - writew(0x771f, &gpio->psel4); - writew(0x00ff, &gpio->psel6); - writew(0xfc00, &gpio->psel7); - - writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */ -} - -static void init_usb_phy(void) -{ - struct usb_common_regs *common0 = USB0_COMMON_BASE; - struct usb_common_regs *common1 = USB1_COMMON_BASE; - struct usb0_phy_regs *phy = USB0_PHY_BASE; - struct usb1_port_regs *port = USB1_PORT_BASE; - struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE; - - writew(0x0100, &phy->reset); /* set reset */ - /* port0 = USB0, port1 = USB1 */ - writew(0x0002, &phy->portsel); - writel(0x0001, &port->port1sel); /* port1 = Host */ - writew(0x0111, &phy->reset); /* clear reset */ - - writew(0x4000, &common0->suspmode); - writew(0x4000, &common1->suspmode); - -#if defined(__LITTLE_ENDIAN) - writel(0x00000000, &align->ehcidatac); - writel(0x00000000, &align->ohcidatac); -#endif -} - -static void init_gether_mdio(void) -{ - struct gpio_regs *gpio = GPIO_BASE; - - writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr); - writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */ -} - -static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) -{ - struct ether_mac_regs *ether; - unsigned char mac[6]; - unsigned long val; - - string_to_enetaddr(mac_string, mac); - - if (!channel) - ether = GETHER0_MAC_BASE; - else - ether = GETHER1_MAC_BASE; - - val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; - writel(val, ðer->mahr); - val = (mac[4] << 8) | mac[5]; - writel(val, ðer->malr); -} - -/***************************************************************** - * This PMB must be set on this timing. The lowlevel_init is run on - * Area 0(phys 0x00000000), so we have to map it. - * - * The new PMB table is following: - * ent virt phys v sz c wt - * 0 0xa0000000 0x40000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 2 0xb0000000 0x50000000 1 128M 0 1 - * 3 0xb8000000 0x58000000 1 128M 0 1 - * 4 0x80000000 0x40000000 1 128M 1 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - * 6 0x90000000 0x50000000 1 128M 1 1 - * 7 0x98000000 0x58000000 1 128M 1 1 - */ -static void set_pmb_on_board_init(void) -{ - struct mmu_regs *mmu = MMU_BASE; - - /* clear ITLB */ - writel(0x00000004, &mmu->mmucr); - - /* delete PMB for SPIBOOT */ - writel(0, PMB_ADDR_BASE(0)); - writel(0, PMB_DATA_BASE(0)); - - /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */ - /* ppn ub v s1 s0 c wt */ - writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0)); - writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0)); - writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2)); - writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2)); - writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3)); - writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3)); - writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4)); - writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4)); - writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6)); - writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6)); - writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7)); - writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7)); -} - -int board_init(void) -{ - init_gpio(); - set_pmb_on_board_init(); - - init_usb_phy(); - init_gether_mdio(); - - return 0; -} - -int board_mmc_init(struct bd_info *bis) -{ - struct gpio_regs *gpio = GPIO_BASE; - - writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr); - writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */ - udelay(1); - writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */ - udelay(200); - - return mmcif_mmc_init(); -} - -static int get_sh_eth_mac_raw(unsigned char *buf, int size) -{ -#ifdef CONFIG_DEPRECATED - struct spi_flash *spi; - int ret; - - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (spi == NULL) { - printf("%s: spi_flash probe failed.\n", __func__); - return 1; - } - - ret = spi_flash_read(spi, SH7752EVB_ETHERNET_MAC_BASE, size, buf); - if (ret) { - printf("%s: spi_flash read failed.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); -#endif - - return 0; -} - -static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf) -{ - memcpy(mac_string, &buf[channel * (SH7752EVB_ETHERNET_MAC_SIZE + 1)], - SH7752EVB_ETHERNET_MAC_SIZE); - mac_string[SH7752EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */ - - return 0; -} - -static void init_ethernet_mac(void) -{ - char mac_string[64]; - char env_string[64]; - int i; - unsigned char *buf; - - buf = malloc(256); - if (!buf) { - printf("%s: malloc failed.\n", __func__); - return; - } - get_sh_eth_mac_raw(buf, 256); - - /* Gigabit Ethernet */ - for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i, mac_string, buf); - if (i == 0) - env_set("ethaddr", mac_string); - else { - sprintf(env_string, "eth%daddr", i); - env_set(env_string, mac_string); - } - set_mac_to_sh_giga_eth_register(i, mac_string); - } - - free(buf); -} - -int board_late_init(void) -{ - init_ethernet_mac(); - - return 0; -} - -#ifdef CONFIG_DEPRECATED -int do_write_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - int i, ret; - char mac_string[256]; - struct spi_flash *spi; - unsigned char *buf; - - if (argc != 3) { - buf = malloc(256); - if (!buf) { - printf("%s: malloc failed.\n", __func__); - return 1; - } - - get_sh_eth_mac_raw(buf, 256); - - /* print current MAC address */ - for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i, mac_string, buf); - printf("GETHERC ch%d = %s\n", i, mac_string); - } - free(buf); - return 0; - } - - /* new setting */ - memset(mac_string, 0xff, sizeof(mac_string)); - sprintf(mac_string, "%s\t%s", - argv[1], argv[2]); - - /* write MAC data to SPI rom */ - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (!spi) { - printf("%s: spi_flash probe failed.\n", __func__); - return 1; - } - - ret = spi_flash_erase(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI, - SH7752EVB_SPI_SECTOR_SIZE); - if (ret) { - printf("%s: spi_flash erase failed.\n", __func__); - return 1; - } - - ret = spi_flash_write(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI, - sizeof(mac_string), mac_string); - if (ret) { - printf("%s: spi_flash write failed.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); - - puts("The writing of the MAC address to SPI ROM was completed.\n"); - - return 0; -} - -U_BOOT_CMD( - write_mac, 3, 1, do_write_mac, - "write MAC address for GETHERC", - "[GETHERC ch0] [GETHERC ch1]\n" -); -#endif diff --git a/board/renesas/sh7752evb/spi-boot.c b/board/renesas/sh7752evb/spi-boot.c deleted file mode 100644 index 91565d44d7f..00000000000 --- a/board/renesas/sh7752evb/spi-boot.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is subject to the terms and conditions of the GNU Lesser - * General Public License. See the file "COPYING.LIB" in the main - * directory of this archive for more details. - */ - -#include <common.h> - -#define CONFIG_RAM_BOOT_PHYS CONFIG_SYS_TEXT_BASE -#define CONFIG_SPI_ADDR 0x00000000 -#define CONFIG_SPI_LENGTH CONFIG_SYS_MONITOR_LEN -#define CONFIG_RAM_BOOT CONFIG_SYS_TEXT_BASE - -#define SPIWDMADR 0xFE001018 -#define SPIWDMCNTR 0xFE001020 -#define SPIDMCOR 0xFE001028 -#define SPIDMINTSR 0xFE001188 -#define SPIDMINTMR 0xFE001190 - -#define SPIDMINTSR_DMEND 0x00000004 - -#define TBR 0xFE002000 -#define RBR 0xFE002000 - -#define CR1 0xFE002008 -#define CR2 0xFE002010 -#define CR3 0xFE002018 -#define CR4 0xFE002020 - -/* CR1 */ -#define SPI_TBE 0x80 -#define SPI_TBF 0x40 -#define SPI_RBE 0x20 -#define SPI_RBF 0x10 -#define SPI_PFONRD 0x08 -#define SPI_SSDB 0x04 -#define SPI_SSD 0x02 -#define SPI_SSA 0x01 - -/* CR2 */ -#define SPI_RSTF 0x80 -#define SPI_LOOPBK 0x40 -#define SPI_CPOL 0x20 -#define SPI_CPHA 0x10 -#define SPI_L1M0 0x08 - -/* CR4 */ -#define SPI_TBEI 0x80 -#define SPI_TBFI 0x40 -#define SPI_RBEI 0x20 -#define SPI_RBFI 0x10 -#define SPI_SpiS0 0x02 -#define SPI_SSS 0x01 - -#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val -#define spi_read(addr) (*(volatile unsigned long *)(addr)) - -/* M25P80 */ -#define M25_READ 0x03 - -#define __uses_spiboot2 __attribute__((section(".spiboot2.text"))) -static void __uses_spiboot2 spi_reset(void) -{ - int timeout = 0x00100000; - - /* Make sure the last transaction is finalized */ - spi_write(0x00, CR3); - spi_write(0x02, CR1); - while (!(spi_read(CR4) & SPI_SpiS0)) { - if (timeout-- < 0) - break; - } - spi_write(0x00, CR1); - - spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */ - spi_write(spi_read(CR2) & ~SPI_RSTF, CR2); - - spi_write(0, SPIDMCOR); -} - -static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr, - unsigned long len) -{ - spi_write(M25_READ, TBR); - spi_write((addr >> 16) & 0xFF, TBR); - spi_write((addr >> 8) & 0xFF, TBR); - spi_write(addr & 0xFF, TBR); - - spi_write(SPIDMINTSR_DMEND, SPIDMINTSR); - spi_write((unsigned long)buf, SPIWDMADR); - spi_write(len & 0xFFFFFFE0, SPIWDMCNTR); - spi_write(1, SPIDMCOR); - - spi_write(0xff, CR3); - spi_write(spi_read(CR1) | SPI_SSDB, CR1); - spi_write(spi_read(CR1) | SPI_SSA, CR1); - - while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND)) - ; - - /* Nagate SP0-SS0 */ - spi_write(0, CR1); -} - -void __uses_spiboot2 spiboot_main(void) -{ - void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE; - - spi_reset(); - spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, - CONFIG_SPI_LENGTH); - - _start(); -} diff --git a/board/renesas/sh7753evb/Kconfig b/board/renesas/sh7753evb/Kconfig deleted file mode 100644 index be889248a8e..00000000000 --- a/board/renesas/sh7753evb/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SH7753EVB - -config SYS_BOARD - default "sh7753evb" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "sh7753evb" - -endif diff --git a/board/renesas/sh7753evb/MAINTAINERS b/board/renesas/sh7753evb/MAINTAINERS deleted file mode 100644 index b6c85eedab7..00000000000 --- a/board/renesas/sh7753evb/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SH7753EVB BOARD -#M: - -S: Maintained -F: board/renesas/sh7753evb/ -F: include/configs/sh7753evb.h -F: configs/sh7753evb_defconfig diff --git a/board/renesas/sh7753evb/Makefile b/board/renesas/sh7753evb/Makefile deleted file mode 100644 index e1e099777c7..00000000000 --- a/board/renesas/sh7753evb/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2012 Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> -# - -obj-y := sh7753evb.o spi-boot.o -extra-y += lowlevel_init.o diff --git a/board/renesas/sh7753evb/lowlevel_init.S b/board/renesas/sh7753evb/lowlevel_init.S deleted file mode 100644 index 901e9eb6488..00000000000 --- a/board/renesas/sh7753evb/lowlevel_init.S +++ /dev/null @@ -1,414 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - */ - -#include <config.h> -#include <asm/processor.h> -#include <asm/macro.h> - -.macro or32, addr, data - mov.l \addr, r1 - mov.l \data, r0 - mov.l @r1, r2 - or r2, r0 - mov.l r0, @r1 -.endm - -.macro wait_DBCMD - mov.l DBWAIT_A, r0 - mov.l @r0, r1 -.endm - - .global lowlevel_init - .section .spiboot1.text - .align 2 - -lowlevel_init: - mov #0, r14 - mova 2f, r0 - mov.l PC_MASK, r1 - tst r0, r1 - bf 2f - - bra exit_pmb - nop - - .align 2 - -/* If CPU runs on SDRAM (PC=0x5???????) or not. */ -PC_MASK: .long 0x20000000 - -2: - mov #1, r14 - - mov.l EXPEVT_A, r0 - mov.l @r0, r0 - mov.l EXPEVT_POWER_ON_RESET, r1 - cmp/eq r0, r1 - bt 1f - - /* - * If EXPEVT value is manual reset or tlb multipul-hit, - * initialization of DBSC3 is not necessary. - */ - bra exit_ddr - nop - -1: - /*------- Reset -------*/ - write32 MRSTCR0_A, MRSTCR0_D - write32 MRSTCR1_A, MRSTCR1_D - - /* For Core Reset */ - mov.l DBACEN_A, r0 - mov.l @r0, r0 - cmp/eq #0, r0 - bt 3f - - /* - * If DBACEN == 1(DBSC was already enabled), we have to avoid the - * initialization of DDR3-SDRAM. - */ - bra exit_ddr - nop - -3: - /*------- DBSC3 -------*/ - /* oscillation stabilization time */ - wait_timer WAIT_OSC_TIME - - /* step 3 */ - write32 DBKIND_A, DBKIND_D - - /* step 4 */ - write32 DBCONF_A, DBCONF_D - write32 DBTR0_A, DBTR0_D - write32 DBTR1_A, DBTR1_D - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D - write32 DBTR4_A, DBTR4_D - write32 DBTR5_A, DBTR5_D - write32 DBTR6_A, DBTR6_D - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D - write32 DBTR13_A, DBTR13_D - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D - write32 DBTR17_A, DBTR17_D - write32 DBTR18_A, DBTR18_D - write32 DBTR19_A, DBTR19_D - write32 DBRNK0_A, DBRNK0_D - write32 DBADJ0_A, DBADJ0_D - write32 DBADJ2_A, DBADJ2_D - - /* step 5 */ - write32 DBCMD_A, DBCMD_RSTL_VAL - wait_timer WAIT_30US - - /* step 6 */ - write32 DBCMD_A, DBCMD_PDEN_VAL - - /* step 7 */ - write32 DBPDCNT3_A, DBPDCNT3_D - - /* step 8 */ - write32 DBPDCNT1_A, DBPDCNT1_D - write32 DBPDCNT2_A, DBPDCNT2_D - write32 DBPDLCK_A, DBPDLCK_D - write32 DBPDRGA_A, DBPDRGA_D - write32 DBPDRGD_A, DBPDRGD_D - - /* step 9 */ - wait_timer WAIT_30US - - /* step 10 */ - write32 DBPDCNT0_A, DBPDCNT0_D - - /* step 11 */ - wait_timer WAIT_30US - wait_timer WAIT_30US - - /* step 12 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - wait_DBCMD - - /* step 13 */ - write32 DBCMD_A, DBCMD_RSTH_VAL - wait_DBCMD - - /* step 14 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - - /* step 15 */ - write32 DBCMD_A, DBCMD_PDXT_VAL - - /* step 16 */ - write32 DBCMD_A, DBCMD_MRS2_VAL - - /* step 17 */ - write32 DBCMD_A, DBCMD_MRS3_VAL - - /* step 18 */ - write32 DBCMD_A, DBCMD_MRS1_VAL - - /* step 19 */ - write32 DBCMD_A, DBCMD_MRS0_VAL - write32 DBPDNCNF_A, DBPDNCNF_D - - /* step 20 */ - write32 DBCMD_A, DBCMD_ZQCL_VAL - - write32 DBCMD_A, DBCMD_REF_VAL - write32 DBCMD_A, DBCMD_REF_VAL - wait_DBCMD - - /* step 21 */ - write32 DBCALTR_A, DBCALTR_D - - /* step 22 */ - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D - write32 DBRFCNF2_A, DBRFCNF2_D - - /* step 23 */ - write32 DBCALCNF_A, DBCALCNF_D - - /* step 24 */ - write32 DBRFEN_A, DBRFEN_D - write32 DBCMD_A, DBCMD_SRXT_VAL - - /* step 25 */ - write32 DBACEN_A, DBACEN_D - - /* step 26 */ - wait_DBCMD - - bra exit_ddr - nop - - .align 2 - -EXPEVT_A: .long 0xff000024 -EXPEVT_POWER_ON_RESET: .long 0x00000000 - -/*------- Reset -------*/ -MRSTCR0_A: .long 0xffd50030 -MRSTCR0_D: .long 0xfe1ffe7f -MRSTCR1_A: .long 0xffd50034 -MRSTCR1_D: .long 0xfff3ffff - -/*------- DBSC3 -------*/ -DBCMD_A: .long 0xfe800018 -DBKIND_A: .long 0xfe800020 -DBCONF_A: .long 0xfe800024 -DBTR0_A: .long 0xfe800040 -DBTR1_A: .long 0xfe800044 -DBTR2_A: .long 0xfe800048 -DBTR3_A: .long 0xfe800050 -DBTR4_A: .long 0xfe800054 -DBTR5_A: .long 0xfe800058 -DBTR6_A: .long 0xfe80005c -DBTR7_A: .long 0xfe800060 -DBTR8_A: .long 0xfe800064 -DBTR9_A: .long 0xfe800068 -DBTR10_A: .long 0xfe80006c -DBTR11_A: .long 0xfe800070 -DBTR12_A: .long 0xfe800074 -DBTR13_A: .long 0xfe800078 -DBTR14_A: .long 0xfe80007c -DBTR15_A: .long 0xfe800080 -DBTR16_A: .long 0xfe800084 -DBTR17_A: .long 0xfe800088 -DBTR18_A: .long 0xfe80008c -DBTR19_A: .long 0xfe800090 -DBRNK0_A: .long 0xfe800100 -DBPDCNT0_A: .long 0xfe800200 -DBPDCNT1_A: .long 0xfe800204 -DBPDCNT2_A: .long 0xfe800208 -DBPDCNT3_A: .long 0xfe80020c -DBPDLCK_A: .long 0xfe800280 -DBPDRGA_A: .long 0xfe800290 -DBPDRGD_A: .long 0xfe8002a0 -DBADJ0_A: .long 0xfe8000c0 -DBADJ2_A: .long 0xfe8000c8 -DBRFCNF0_A: .long 0xfe8000e0 -DBRFCNF1_A: .long 0xfe8000e4 -DBRFCNF2_A: .long 0xfe8000e8 -DBCALCNF_A: .long 0xfe8000f4 -DBRFEN_A: .long 0xfe800014 -DBACEN_A: .long 0xfe800010 -DBWAIT_A: .long 0xfe80001c -DBCALTR_A: .long 0xfe8000f8 -DBPDNCNF_A: .long 0xfe800180 - -WAIT_OSC_TIME: .long 6000 -WAIT_30US: .long 13333 - -DBCMD_RSTL_VAL: .long 0x20000000 -DBCMD_PDEN_VAL: .long 0x1000d73c -DBCMD_WAIT_VAL: .long 0x0000d73c -DBCMD_RSTH_VAL: .long 0x2100d73c -DBCMD_PDXT_VAL: .long 0x110000c8 -DBCMD_MRS0_VAL: .long 0x28000930 -DBCMD_MRS1_VAL: .long 0x29000004 -DBCMD_MRS2_VAL: .long 0x2a000008 -DBCMD_MRS3_VAL: .long 0x2b000000 -DBCMD_ZQCL_VAL: .long 0x03000200 -DBCMD_REF_VAL: .long 0x0c000000 -DBCMD_SRXT_VAL: .long 0x19000000 -DBKIND_D: .long 0x00000007 -DBCONF_D: .long 0x0f030a01 -DBTR0_D: .long 0x00000007 -DBTR1_D: .long 0x00000006 -DBTR2_D: .long 0x00000000 -DBTR3_D: .long 0x00000007 -DBTR4_D: .long 0x00070007 -DBTR5_D: .long 0x0000001b -DBTR6_D: .long 0x00000014 -DBTR7_D: .long 0x00000004 -DBTR8_D: .long 0x00000014 -DBTR9_D: .long 0x00000004 -DBTR10_D: .long 0x00000008 -DBTR11_D: .long 0x00000007 -DBTR12_D: .long 0x0000000e -DBTR13_D: .long 0x000000a0 -DBTR14_D: .long 0x00060006 -DBTR15_D: .long 0x00000003 -DBTR16_D: .long 0x00160002 -DBTR17_D: .long 0x000c0000 -DBTR18_D: .long 0x00000200 -DBTR19_D: .long 0x00000040 -DBRNK0_D: .long 0x00000001 -DBPDCNT0_D: .long 0x00000001 -DBPDCNT1_D: .long 0x00000001 -DBPDCNT2_D: .long 0x00000000 -DBPDCNT3_D: .long 0x00004010 -DBPDLCK_D: .long 0x0000a55a -DBPDRGA_D: .long 0x00000028 -DBPDRGD_D: .long 0x00017100 - -DBADJ0_D: .long 0x00010000 -DBADJ2_D: .long 0x18061806 -DBRFCNF0_D: .long 0x000001ff -DBRFCNF1_D: .long 0x00081040 -DBRFCNF2_D: .long 0x00000000 -DBCALCNF_D: .long 0x0000ffff -DBRFEN_D: .long 0x00000001 -DBACEN_D: .long 0x00000001 -DBCALTR_D: .long 0x08200820 -DBPDNCNF_D: .long 0x00000001 - - .align 2 -exit_ddr: -#if defined(CONFIG_SH_32BIT) - /*------- set PMB -------*/ - write32 PASCR_A, PASCR_29BIT_D - write32 MMUCR_A, MMUCR_D - - /***************************************************************** - * ent virt phys v sz c wt - * 0 0xa0000000 0x00000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - */ - write32 PMB_ADDR_SPIBOOT_A, PMB_ADDR_SPIBOOT_D - write32 PMB_DATA_SPIBOOT_A, PMB_DATA_SPIBOOT_D - write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D - write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D - write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D - write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D - - write32 PMB_ADDR_ENTRY2, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY3, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY4, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY6, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY7, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY8, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY9, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY10, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY11, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY12, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY13, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY14, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY15, PMB_ADDR_NOT_USE_D - - write32 PASCR_A, PASCR_INIT - mov.l DUMMY_ADDR, r0 - icbi @r0 -#endif /* if defined(CONFIG_SH_32BIT) */ - -exit_pmb: - /* CPU is running on ILRAM? */ - mov r14, r0 - tst #1, r0 - bt 1f - - mov.l _stack_ilram, r15 - mov.l _spiboot_main, r0 -100: bsrf r0 - nop - - .align 2 -_spiboot_main: .long (spiboot_main - (100b + 4)) -_stack_ilram: .long 0xe5204000 - -1: - write32 CCR_A, CCR_D - - rts - nop - - .align 2 - -#if defined(CONFIG_SH_32BIT) -/*------- set PMB -------*/ -PMB_ADDR_SPIBOOT_A: .long PMB_ADDR_BASE(0) -PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(1) -PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(5) -PMB_ADDR_ENTRY2: .long PMB_ADDR_BASE(2) -PMB_ADDR_ENTRY3: .long PMB_ADDR_BASE(3) -PMB_ADDR_ENTRY4: .long PMB_ADDR_BASE(4) -PMB_ADDR_ENTRY6: .long PMB_ADDR_BASE(6) -PMB_ADDR_ENTRY7: .long PMB_ADDR_BASE(7) -PMB_ADDR_ENTRY8: .long PMB_ADDR_BASE(8) -PMB_ADDR_ENTRY9: .long PMB_ADDR_BASE(9) -PMB_ADDR_ENTRY10: .long PMB_ADDR_BASE(10) -PMB_ADDR_ENTRY11: .long PMB_ADDR_BASE(11) -PMB_ADDR_ENTRY12: .long PMB_ADDR_BASE(12) -PMB_ADDR_ENTRY13: .long PMB_ADDR_BASE(13) -PMB_ADDR_ENTRY14: .long PMB_ADDR_BASE(14) -PMB_ADDR_ENTRY15: .long PMB_ADDR_BASE(15) - -PMB_ADDR_SPIBOOT_D: .long mk_pmb_addr_val(0xa0) -PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88) -PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8) -PMB_ADDR_NOT_USE_D: .long 0x00000000 - -PMB_DATA_SPIBOOT_A: .long PMB_DATA_BASE(0) -PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(1) -PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(5) - -/* ppn ub v s1 s0 c wt */ -PMB_DATA_SPIBOOT_D: .long mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1) -PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1) -PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1) - -PASCR_A: .long 0xff000070 -DUMMY_ADDR: .long 0xa0000000 -PASCR_29BIT_D: .long 0x00000000 -PASCR_INIT: .long 0x80000080 -MMUCR_A: .long 0xff000010 -MMUCR_D: .long 0x00000004 /* clear ITLB */ -#endif /* CONFIG_SH_32BIT */ - -CCR_A: .long CCR -CCR_D: .long CCR_CACHE_INIT diff --git a/board/renesas/sh7753evb/sh7753evb.c b/board/renesas/sh7753evb/sh7753evb.c deleted file mode 100644 index f34dec1dfab..00000000000 --- a/board/renesas/sh7753evb/sh7753evb.c +++ /dev/null @@ -1,329 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#include <common.h> -#include <command.h> -#include <env.h> -#include <flash.h> -#include <init.h> -#include <malloc.h> -#include <net.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/mmc.h> -#include <spi.h> -#include <spi_flash.h> -#include <linux/delay.h> - -int checkboard(void) -{ - puts("BOARD: SH7753 EVB\n"); - - return 0; -} - -static void init_gpio(void) -{ - struct gpio_regs *gpio = GPIO_BASE; - struct sermux_regs *sermux = SERMUX_BASE; - - /* GPIO */ - writew(0x0000, &gpio->pacr); /* GETHER */ - writew(0x0001, &gpio->pbcr); /* INTC */ - writew(0x0000, &gpio->pccr); /* PWMU, INTC */ - writew(0x0000, &gpio->pdcr); /* SPI0 */ - writew(0xeaff, &gpio->pecr); /* GPIO */ - writew(0x0000, &gpio->pfcr); /* WDT */ - writew(0x0004, &gpio->pgcr); /* SPI0, GETHER MDIO gate(PTG1) */ - writew(0x0000, &gpio->phcr); /* SPI1 */ - writew(0x0000, &gpio->picr); /* SDHI */ - writew(0x0000, &gpio->pjcr); /* SCIF4 */ - writew(0x0003, &gpio->pkcr); /* SerMux */ - writew(0x0000, &gpio->plcr); /* SerMux */ - writew(0x0000, &gpio->pmcr); /* RIIC */ - writew(0x0000, &gpio->pncr); /* USB, SGPIO */ - writew(0x0000, &gpio->pocr); /* SGPIO */ - writew(0xd555, &gpio->pqcr); /* GPIO */ - writew(0x0000, &gpio->prcr); /* RIIC */ - writew(0x0000, &gpio->pscr); /* RIIC */ - writew(0x0000, &gpio->ptcr); /* STATUS */ - writeb(0x00, &gpio->pudr); - writew(0x5555, &gpio->pucr); /* Debug LED */ - writew(0x0000, &gpio->pvcr); /* RSPI */ - writew(0x0000, &gpio->pwcr); /* EVC */ - writew(0x0000, &gpio->pxcr); /* LBSC */ - writew(0x0000, &gpio->pycr); /* LBSC */ - writew(0x0000, &gpio->pzcr); /* eMMC */ - writew(0xfe00, &gpio->psel0); - writew(0x0000, &gpio->psel1); - writew(0x3000, &gpio->psel2); - writew(0xff00, &gpio->psel3); - writew(0x771f, &gpio->psel4); - writew(0x0ffc, &gpio->psel5); - writew(0x00ff, &gpio->psel6); - writew(0xfc00, &gpio->psel7); - - writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */ -} - -static void init_usb_phy(void) -{ - struct usb_common_regs *common0 = USB0_COMMON_BASE; - struct usb_common_regs *common1 = USB1_COMMON_BASE; - struct usb0_phy_regs *phy = USB0_PHY_BASE; - struct usb1_port_regs *port = USB1_PORT_BASE; - struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE; - - writew(0x0100, &phy->reset); /* set reset */ - /* port0 = USB0, port1 = USB1 */ - writew(0x0002, &phy->portsel); - writel(0x0001, &port->port1sel); /* port1 = Host */ - writew(0x0111, &phy->reset); /* clear reset */ - - writew(0x4000, &common0->suspmode); - writew(0x4000, &common1->suspmode); - -#if defined(__LITTLE_ENDIAN) - writel(0x00000000, &align->ehcidatac); - writel(0x00000000, &align->ohcidatac); -#endif -} - -static void init_gether_mdio(void) -{ - struct gpio_regs *gpio = GPIO_BASE; - - writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr); - writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */ -} - -static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) -{ - struct ether_mac_regs *ether; - unsigned char mac[6]; - unsigned long val; - - string_to_enetaddr(mac_string, mac); - - if (!channel) - ether = GETHER0_MAC_BASE; - else - ether = GETHER1_MAC_BASE; - - val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; - writel(val, ðer->mahr); - val = (mac[4] << 8) | mac[5]; - writel(val, ðer->malr); -} - -#if defined(CONFIG_SH_32BIT) -/***************************************************************** - * This PMB must be set on this timing. The lowlevel_init is run on - * Area 0(phys 0x00000000), so we have to map it. - * - * The new PMB table is following: - * ent virt phys v sz c wt - * 0 0xa0000000 0x40000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 2 0xb0000000 0x50000000 1 128M 0 1 - * 3 0xb8000000 0x58000000 1 128M 0 1 - * 4 0x80000000 0x40000000 1 128M 1 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - * 6 0x90000000 0x50000000 1 128M 1 1 - * 7 0x98000000 0x58000000 1 128M 1 1 - */ -static void set_pmb_on_board_init(void) -{ - struct mmu_regs *mmu = MMU_BASE; - - /* clear ITLB */ - writel(0x00000004, &mmu->mmucr); - - /* delete PMB for SPIBOOT */ - writel(0, PMB_ADDR_BASE(0)); - writel(0, PMB_DATA_BASE(0)); - - /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */ - /* ppn ub v s1 s0 c wt */ - writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0)); - writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0)); - writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2)); - writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2)); - writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3)); - writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3)); - writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4)); - writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4)); - writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6)); - writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6)); - writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7)); - writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7)); -} -#endif - -int board_init(void) -{ - struct gether_control_regs *gether = GETHER_CONTROL_BASE; - - init_gpio(); -#if defined(CONFIG_SH_32BIT) - set_pmb_on_board_init(); -#endif - - /* Sets TXnDLY to B'010 */ - writel(0x00000202, &gether->gbecont); - - init_usb_phy(); - init_gether_mdio(); - - return 0; -} - -int board_mmc_init(struct bd_info *bis) -{ - struct gpio_regs *gpio = GPIO_BASE; - - writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr); - writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */ - udelay(1); - writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */ - udelay(200); - - return mmcif_mmc_init(); -} - -static int get_sh_eth_mac_raw(unsigned char *buf, int size) -{ -#ifdef CONFIG_DEPRECATED - struct spi_flash *spi; - int ret; - - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (spi == NULL) { - printf("%s: spi_flash probe failed.\n", __func__); - return 1; - } - - ret = spi_flash_read(spi, SH7753EVB_ETHERNET_MAC_BASE, size, buf); - if (ret) { - printf("%s: spi_flash read failed.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); -#endif - - return 0; -} - -static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf) -{ - memcpy(mac_string, &buf[channel * (SH7753EVB_ETHERNET_MAC_SIZE + 1)], - SH7753EVB_ETHERNET_MAC_SIZE); - mac_string[SH7753EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */ - - return 0; -} - -static void init_ethernet_mac(void) -{ - char mac_string[64]; - char env_string[64]; - int i; - unsigned char *buf; - - buf = malloc(256); - if (!buf) { - printf("%s: malloc failed.\n", __func__); - return; - } - get_sh_eth_mac_raw(buf, 256); - - /* Gigabit Ethernet */ - for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i, mac_string, buf); - if (i == 0) - env_set("ethaddr", mac_string); - else { - sprintf(env_string, "eth%daddr", i); - env_set(env_string, mac_string); - } - set_mac_to_sh_giga_eth_register(i, mac_string); - } - - free(buf); -} - -int board_late_init(void) -{ - init_ethernet_mac(); - - return 0; -} - -#ifdef CONFIG_DEPRECATED -int do_write_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - int i, ret; - char mac_string[256]; - struct spi_flash *spi; - unsigned char *buf; - - if (argc != 3) { - buf = malloc(256); - if (!buf) { - printf("%s: malloc failed.\n", __func__); - return 1; - } - - get_sh_eth_mac_raw(buf, 256); - - /* print current MAC address */ - for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i, mac_string, buf); - printf("GETHERC ch%d = %s\n", i, mac_string); - } - free(buf); - return 0; - } - - /* new setting */ - memset(mac_string, 0xff, sizeof(mac_string)); - sprintf(mac_string, "%s\t%s", - argv[1], argv[2]); - - /* write MAC data to SPI rom */ - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (!spi) { - printf("%s: spi_flash probe failed.\n", __func__); - return 1; - } - - ret = spi_flash_erase(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI, - SH7753EVB_SPI_SECTOR_SIZE); - if (ret) { - printf("%s: spi_flash erase failed.\n", __func__); - return 1; - } - - ret = spi_flash_write(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI, - sizeof(mac_string), mac_string); - if (ret) { - printf("%s: spi_flash write failed.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); - - puts("The writing of the MAC address to SPI ROM was completed.\n"); - - return 0; -} - -U_BOOT_CMD( - write_mac, 3, 1, do_write_mac, - "write MAC address for GETHERC", - "[GETHERC ch0] [GETHERC ch1]\n" -); -#endif diff --git a/board/renesas/sh7753evb/spi-boot.c b/board/renesas/sh7753evb/spi-boot.c deleted file mode 100644 index 243c6f6e883..00000000000 --- a/board/renesas/sh7753evb/spi-boot.c +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - */ - -#include <common.h> - -#define CONFIG_SPI_ADDR 0x00000000 -#define PHYADDR(_addr) ((_addr & 0x1fffffff) | 0x40000000) -#define CONFIG_RAM_BOOT_PHYS PHYADDR(CONFIG_SYS_TEXT_BASE) - -#define SPIWDMADR 0xFE001018 -#define SPIWDMCNTR 0xFE001020 -#define SPIDMCOR 0xFE001028 -#define SPIDMINTSR 0xFE001188 -#define SPIDMINTMR 0xFE001190 - -#define SPIDMINTSR_DMEND 0x00000004 - -#define TBR 0xFE002000 -#define RBR 0xFE002000 - -#define CR1 0xFE002008 -#define CR2 0xFE002010 -#define CR3 0xFE002018 -#define CR4 0xFE002020 -#define CR7 0xFE002038 -#define CR8 0xFE002040 - -/* CR1 */ -#define SPI_TBE 0x80 -#define SPI_TBF 0x40 -#define SPI_RBE 0x20 -#define SPI_RBF 0x10 -#define SPI_PFONRD 0x08 -#define SPI_SSDB 0x04 -#define SPI_SSD 0x02 -#define SPI_SSA 0x01 - -/* CR2 */ -#define SPI_RSTF 0x80 -#define SPI_LOOPBK 0x40 -#define SPI_CPOL 0x20 -#define SPI_CPHA 0x10 -#define SPI_L1M0 0x08 - -/* CR4 */ -#define SPI_TBEI 0x80 -#define SPI_TBFI 0x40 -#define SPI_RBEI 0x20 -#define SPI_RBFI 0x10 -#define SPI_SpiS0 0x02 -#define SPI_SSS 0x01 - -/* CR7 */ -#define CR7_IDX_OR12 0x12 -#define OR12_ADDR32 0x00000001 - -#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val -#define spi_read(addr) (*(volatile unsigned long *)(addr)) - -/* M25P80 */ -#define M25_READ 0x03 -#define M25_READ_4BYTE 0x13 - -extern void bss_start(void); - -#define __uses_spiboot2 __attribute__((section(".spiboot2.text"))) -static void __uses_spiboot2 spi_reset(void) -{ - int timeout = 0x00100000; - - /* Make sure the last transaction is finalized */ - spi_write(0x00, CR3); - spi_write(0x02, CR1); - while (!(spi_read(CR4) & SPI_SpiS0)) { - if (timeout-- < 0) - break; - } - spi_write(0x00, CR1); - - spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */ - spi_write(spi_read(CR2) & ~SPI_RSTF, CR2); - - spi_write(0, SPIDMCOR); -} - -static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr, - unsigned long len) -{ - spi_write(CR7_IDX_OR12, CR7); - if (spi_read(CR8) & OR12_ADDR32) { - /* 4-bytes address mode */ - spi_write(M25_READ_4BYTE, TBR); - spi_write((addr >> 24) & 0xFF, TBR); /* ADDR31-24 */ - } else { - /* 3-bytes address mode */ - spi_write(M25_READ, TBR); - } - spi_write((addr >> 16) & 0xFF, TBR); /* ADDR23-16 */ - spi_write((addr >> 8) & 0xFF, TBR); /* ADDR15-8 */ - spi_write(addr & 0xFF, TBR); /* ADDR7-0 */ - - spi_write(SPIDMINTSR_DMEND, SPIDMINTSR); - spi_write((unsigned long)buf, SPIWDMADR); - spi_write(len & 0xFFFFFFE0, SPIWDMCNTR); - spi_write(1, SPIDMCOR); - - spi_write(0xff, CR3); - spi_write(spi_read(CR1) | SPI_SSDB, CR1); - spi_write(spi_read(CR1) | SPI_SSA, CR1); - - while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND)) - ; - - /* Nagate SP0-SS0 */ - spi_write(0, CR1); -} - -void __uses_spiboot2 spiboot_main(void) -{ - /* - * This code rounds len up for SPIWDMCNTR. We should set it to 0 in - * lower 5-bits. - */ - void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE; - volatile unsigned long len = (bss_start - _start + 31) & 0xffffffe0; - - spi_reset(); - spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, len); - - _start(); -} diff --git a/board/renesas/sh7757lcr/Kconfig b/board/renesas/sh7757lcr/Kconfig deleted file mode 100644 index 3fba80ddcab..00000000000 --- a/board/renesas/sh7757lcr/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SH7757LCR - -config SYS_BOARD - default "sh7757lcr" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "sh7757lcr" - -endif diff --git a/board/renesas/sh7757lcr/MAINTAINERS b/board/renesas/sh7757lcr/MAINTAINERS deleted file mode 100644 index 20aca678a67..00000000000 --- a/board/renesas/sh7757lcr/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SH7757LCR BOARD -#M: - -S: Maintained -F: board/renesas/sh7757lcr/ -F: include/configs/sh7757lcr.h -F: configs/sh7757lcr_defconfig diff --git a/board/renesas/sh7757lcr/Makefile b/board/renesas/sh7757lcr/Makefile deleted file mode 100644 index ed3be4b6ab6..00000000000 --- a/board/renesas/sh7757lcr/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> -# - -obj-y := sh7757lcr.o spi-boot.o -extra-y += lowlevel_init.o diff --git a/board/renesas/sh7757lcr/README.sh7757lcr b/board/renesas/sh7757lcr/README.sh7757lcr deleted file mode 100644 index 9453839d2ce..00000000000 --- a/board/renesas/sh7757lcr/README.sh7757lcr +++ /dev/null @@ -1,77 +0,0 @@ -======================================== -Renesas R0P7757LC0030RL board -======================================== - -This board specification: -========================= - -The R0P7757LC0030RL(board config name:sh7757lcr) has the following device: - - - SH7757 (SH-4A) - - DDR3-SDRAM 256MB (with ECC) - - SPI ROM 8MB - - 2D Graphic controller - - Ethernet controller - - eMMC 2GB - - -configuration for This board: -============================= - -You can select the configuration as follows: - - - make sh7757lcr_config - - -This board specific command: -============================ - -This board has the following its specific command: - - - sh_g200 - - write_mac - - -1. sh_g200 - -If we run this command, SH4 can control the G200. -The default setting is that SH4 cannot control the G200. - - -2. write_mac - -You can write MAC address to SPI ROM. - - Usage 1) Write MAC address - - write_mac [ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1] - - For example) - => write_mac 00:00:87:6c:21:80 00:00:87:6c:21:81 00:00:87:6c:21:82 00:00:87:6c:21:83 - *) We have to input the command as a single line - (without carriage return) - *) We have to reset after input the command. - - Usage 2) Show current data - - write_mac - - For example) - => write_mac - ETHERC ch0 = 00:00:87:6c:21:80 - ETHERC ch1 = 00:00:87:6c:21:81 - GETHERC ch0 = 00:00:87:6c:21:82 - GETHERC ch1 = 00:00:87:6c:21:83 - - -Update SPI ROM: -============================ - -1. Copy u-boot image to RAM area. -2. Probe SPI device. - => sf probe 0 - 8192 KiB M25P64 at 0:0 is now current device -3. Erase SPI ROM. - => sf erase 0 80000 -4. Write u-boot image to SPI ROM. - => sf write 0x89000000 0 80000 diff --git a/board/renesas/sh7757lcr/lowlevel_init.S b/board/renesas/sh7757lcr/lowlevel_init.S deleted file mode 100644 index ee288f807f5..00000000000 --- a/board/renesas/sh7757lcr/lowlevel_init.S +++ /dev/null @@ -1,544 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 Renesas Solutions Corp. - */ - -#include <config.h> -#include <asm/processor.h> -#include <asm/macro.h> - -.macro or32, addr, data - mov.l \addr, r1 - mov.l \data, r0 - mov.l @r1, r2 - or r2, r0 - mov.l r0, @r1 -.endm - -.macro wait_DBCMD - mov.l DBWAIT_A, r0 - mov.l @r0, r1 -.endm - - .global lowlevel_init - .section .spiboot1.text - .align 2 - -lowlevel_init: - - /*------- GPIO -------*/ - write8 PGDR_A, PGDR_D /* eMMC power off */ - - write16 PACR_A, PACR_D - write16 PBCR_A, PBCR_D - write16 PCCR_A, PCCR_D - write16 PDCR_A, PDCR_D - write16 PECR_A, PECR_D - write16 PFCR_A, PFCR_D - write16 PGCR_A, PGCR_D - write16 PHCR_A, PHCR_D - write16 PICR_A, PICR_D - write16 PJCR_A, PJCR_D - write16 PKCR_A, PKCR_D - write16 PLCR_A, PLCR_D - write16 PMCR_A, PMCR_D - write16 PNCR_A, PNCR_D - write16 POCR_A, POCR_D - write16 PQCR_A, PQCR_D - write16 PRCR_A, PRCR_D - write16 PSCR_A, PSCR_D - write16 PTCR_A, PTCR_D - write16 PUCR_A, PUCR_D - write16 PVCR_A, PVCR_D - write16 PWCR_A, PWCR_D - write16 PXCR_A, PXCR_D - write16 PYCR_A, PYCR_D - write16 PZCR_A, PZCR_D - write16 PSEL0_A, PSEL0_D - write16 PSEL1_A, PSEL1_D - write16 PSEL2_A, PSEL2_D - write16 PSEL3_A, PSEL3_D - write16 PSEL4_A, PSEL4_D - write16 PSEL5_A, PSEL5_D - write16 PSEL6_A, PSEL6_D - write16 PSEL7_A, PSEL7_D - write16 PSEL8_A, PSEL8_D - - bra exit_gpio - nop - - .align 4 - -/*------- GPIO -------*/ -PGDR_A: .long 0xffec0040 -PACR_A: .long 0xffec0000 -PBCR_A: .long 0xffec0002 -PCCR_A: .long 0xffec0004 -PDCR_A: .long 0xffec0006 -PECR_A: .long 0xffec0008 -PFCR_A: .long 0xffec000a -PGCR_A: .long 0xffec000c -PHCR_A: .long 0xffec000e -PICR_A: .long 0xffec0010 -PJCR_A: .long 0xffec0012 -PKCR_A: .long 0xffec0014 -PLCR_A: .long 0xffec0016 -PMCR_A: .long 0xffec0018 -PNCR_A: .long 0xffec001a -POCR_A: .long 0xffec001c -PQCR_A: .long 0xffec0020 -PRCR_A: .long 0xffec0022 -PSCR_A: .long 0xffec0024 -PTCR_A: .long 0xffec0026 -PUCR_A: .long 0xffec0028 -PVCR_A: .long 0xffec002a -PWCR_A: .long 0xffec002c -PXCR_A: .long 0xffec002e -PYCR_A: .long 0xffec0030 -PZCR_A: .long 0xffec0032 -PSEL0_A: .long 0xffec0070 -PSEL1_A: .long 0xffec0072 -PSEL2_A: .long 0xffec0074 -PSEL3_A: .long 0xffec0076 -PSEL4_A: .long 0xffec0078 -PSEL5_A: .long 0xffec007a -PSEL6_A: .long 0xffec007c -PSEL7_A: .long 0xffec0082 -PSEL8_A: .long 0xffec0084 - -PGDR_D: .long 0x80 -PACR_D: .long 0x0000 -PBCR_D: .long 0x0001 -PCCR_D: .long 0x0000 -PDCR_D: .long 0x0000 -PECR_D: .long 0x0000 -PFCR_D: .long 0x0000 -PGCR_D: .long 0x0000 -PHCR_D: .long 0x0000 -PICR_D: .long 0x0000 -PJCR_D: .long 0x0000 -PKCR_D: .long 0x0003 -PLCR_D: .long 0x0000 -PMCR_D: .long 0x0000 -PNCR_D: .long 0x0000 -POCR_D: .long 0x0000 -PQCR_D: .long 0xc000 -PRCR_D: .long 0x0000 -PSCR_D: .long 0x0000 -PTCR_D: .long 0x0000 -#if defined(CONFIG_SH7757_OFFSET_SPI) -PUCR_D: .long 0x0055 -#else -PUCR_D: .long 0x0000 -#endif -PVCR_D: .long 0x0000 -PWCR_D: .long 0x0000 -PXCR_D: .long 0x0000 -PYCR_D: .long 0x0000 -PZCR_D: .long 0x0000 -PSEL0_D: .long 0xfe00 -PSEL1_D: .long 0x0000 -PSEL2_D: .long 0x3000 -PSEL3_D: .long 0xff00 -PSEL4_D: .long 0x771f -PSEL5_D: .long 0x0ffc -PSEL6_D: .long 0x00ff -PSEL7_D: .long 0xfc00 -PSEL8_D: .long 0x0000 - - .align 2 - -exit_gpio: - mov #0, r14 - mova 2f, r0 - mov.l PC_MASK, r1 - tst r0, r1 - bf 2f - - bra exit_pmb - nop - - .align 2 - -/* If CPU runs on SDRAM, PC is 0x8???????. */ -PC_MASK: .long 0x20000000 - -2: - mov #1, r14 - - mov.l EXPEVT_A, r0 - mov.l @r0, r0 - mov.l EXPEVT_POWER_ON_RESET, r1 - cmp/eq r0, r1 - bt 1f - - /* - * If EXPEVT value is manual reset or tlb multipul-hit, - * initialization of DDR3IF is not necessary. - */ - bra exit_ddr - nop - -1: - /* For Core Reset */ - mov.l DBACEN_A, r0 - mov.l @r0, r0 - cmp/eq #0, r0 - bt 3f - - /* - * If DBACEN == 1(DBSC was already enabled), we have to avoid the - * initialization of DDR3-SDRAM. - */ - bra exit_ddr - nop - -3: - /*------- DDR3IF -------*/ - /* oscillation stabilization time */ - wait_timer WAIT_OSC_TIME - - /* step 3 */ - write32 DBCMD_A, DBCMD_RSTL_VAL - wait_timer WAIT_30US - - /* step 4 */ - write32 DBCMD_A, DBCMD_PDEN_VAL - - /* step 5 */ - write32 DBKIND_A, DBKIND_D - - /* step 6 */ - write32 DBCONF_A, DBCONF_D - write32 DBTR0_A, DBTR0_D - write32 DBTR1_A, DBTR1_D - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D - write32 DBTR4_A, DBTR4_D - write32 DBTR5_A, DBTR5_D - write32 DBTR6_A, DBTR6_D - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D - write32 DBTR13_A, DBTR13_D - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D - write32 DBTR17_A, DBTR17_D - write32 DBTR18_A, DBTR18_D - write32 DBTR19_A, DBTR19_D - write32 DBRNK0_A, DBRNK0_D - - /* step 7 */ - write32 DBPDCNT3_A, DBPDCNT3_D - - /* step 8 */ - write32 DBPDCNT1_A, DBPDCNT1_D - write32 DBPDCNT2_A, DBPDCNT2_D - write32 DBPDLCK_A, DBPDLCK_D - write32 DBPDRGA_A, DBPDRGA_D - write32 DBPDRGD_A, DBPDRGD_D - - /* step 9 */ - wait_timer WAIT_30US - - /* step 10 */ - write32 DBPDCNT0_A, DBPDCNT0_D - - /* step 11 */ - wait_timer WAIT_30US - wait_timer WAIT_30US - - /* step 12 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - wait_DBCMD - - /* step 13 */ - write32 DBCMD_A, DBCMD_RSTH_VAL - wait_DBCMD - - /* step 14 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - - /* step 15 */ - write32 DBCMD_A, DBCMD_PDXT_VAL - - /* step 16 */ - write32 DBCMD_A, DBCMD_MRS2_VAL - - /* step 17 */ - write32 DBCMD_A, DBCMD_MRS3_VAL - - /* step 18 */ - write32 DBCMD_A, DBCMD_MRS1_VAL - - /* step 19 */ - write32 DBCMD_A, DBCMD_MRS0_VAL - - /* step 20 */ - write32 DBCMD_A, DBCMD_ZQCL_VAL - - write32 DBCMD_A, DBCMD_REF_VAL - write32 DBCMD_A, DBCMD_REF_VAL - wait_DBCMD - - /* step 21 */ - write32 DBADJ0_A, DBADJ0_D - write32 DBADJ1_A, DBADJ1_D - write32 DBADJ2_A, DBADJ2_D - - /* step 22 */ - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D - write32 DBRFCNF2_A, DBRFCNF2_D - - /* step 23 */ - write32 DBCALCNF_A, DBCALCNF_D - - /* step 24 */ - write32 DBRFEN_A, DBRFEN_D - write32 DBCMD_A, DBCMD_SRXT_VAL - - /* step 25 */ - write32 DBACEN_A, DBACEN_D - - /* step 26 */ - wait_DBCMD - -#if defined(CONFIG_SH7757LCR_DDR_ECC) - /* enable DDR-ECC */ - write32 ECD_ECDEN_A, ECD_ECDEN_D - write32 ECD_INTSR_A, ECD_INTSR_D - write32 ECD_SPACER_A, ECD_SPACER_D - write32 ECD_MCR_A, ECD_MCR_D -#endif - bra exit_ddr - nop - - .align 4 - -EXPEVT_A: .long 0xff000024 -EXPEVT_POWER_ON_RESET: .long 0x00000000 - -/*------- DDR3IF -------*/ -DBCMD_A: .long 0xfe800018 -DBKIND_A: .long 0xfe800020 -DBCONF_A: .long 0xfe800024 -DBTR0_A: .long 0xfe800040 -DBTR1_A: .long 0xfe800044 -DBTR2_A: .long 0xfe800048 -DBTR3_A: .long 0xfe800050 -DBTR4_A: .long 0xfe800054 -DBTR5_A: .long 0xfe800058 -DBTR6_A: .long 0xfe80005c -DBTR7_A: .long 0xfe800060 -DBTR8_A: .long 0xfe800064 -DBTR9_A: .long 0xfe800068 -DBTR10_A: .long 0xfe80006c -DBTR11_A: .long 0xfe800070 -DBTR12_A: .long 0xfe800074 -DBTR13_A: .long 0xfe800078 -DBTR14_A: .long 0xfe80007c -DBTR15_A: .long 0xfe800080 -DBTR16_A: .long 0xfe800084 -DBTR17_A: .long 0xfe800088 -DBTR18_A: .long 0xfe80008c -DBTR19_A: .long 0xfe800090 -DBRNK0_A: .long 0xfe800100 -DBPDCNT0_A: .long 0xfe800200 -DBPDCNT1_A: .long 0xfe800204 -DBPDCNT2_A: .long 0xfe800208 -DBPDCNT3_A: .long 0xfe80020c -DBPDLCK_A: .long 0xfe800280 -DBPDRGA_A: .long 0xfe800290 -DBPDRGD_A: .long 0xfe8002a0 -DBADJ0_A: .long 0xfe8000c0 -DBADJ1_A: .long 0xfe8000c4 -DBADJ2_A: .long 0xfe8000c8 -DBRFCNF0_A: .long 0xfe8000e0 -DBRFCNF1_A: .long 0xfe8000e4 -DBRFCNF2_A: .long 0xfe8000e8 -DBCALCNF_A: .long 0xfe8000f4 -DBRFEN_A: .long 0xfe800014 -DBACEN_A: .long 0xfe800010 -DBWAIT_A: .long 0xfe80001c - -WAIT_OSC_TIME: .long 6000 -WAIT_30US: .long 13333 - -DBCMD_RSTL_VAL: .long 0x20000000 -DBCMD_PDEN_VAL: .long 0x1000d73c -DBCMD_WAIT_VAL: .long 0x0000d73c -DBCMD_RSTH_VAL: .long 0x2100d73c -DBCMD_PDXT_VAL: .long 0x110000c8 -DBCMD_MRS0_VAL: .long 0x28000930 -DBCMD_MRS1_VAL: .long 0x29000004 -DBCMD_MRS2_VAL: .long 0x2a000008 -DBCMD_MRS3_VAL: .long 0x2b000000 -DBCMD_ZQCL_VAL: .long 0x03000200 -DBCMD_REF_VAL: .long 0x0c000000 -DBCMD_SRXT_VAL: .long 0x19000000 -DBKIND_D: .long 0x00000007 -DBCONF_D: .long 0x0f030a01 -DBTR0_D: .long 0x00000007 -DBTR1_D: .long 0x00000006 -DBTR2_D: .long 0x00000000 -DBTR3_D: .long 0x00000007 -DBTR4_D: .long 0x00070007 -DBTR5_D: .long 0x0000001b -DBTR6_D: .long 0x00000014 -DBTR7_D: .long 0x00000005 -DBTR8_D: .long 0x00000015 -DBTR9_D: .long 0x00000006 -DBTR10_D: .long 0x00000008 -DBTR11_D: .long 0x00000007 -DBTR12_D: .long 0x0000000e -DBTR13_D: .long 0x00000056 -DBTR14_D: .long 0x00000006 -DBTR15_D: .long 0x00000004 -DBTR16_D: .long 0x00150002 -DBTR17_D: .long 0x000c0017 -DBTR18_D: .long 0x00000200 -DBTR19_D: .long 0x00000040 -DBRNK0_D: .long 0x00000001 -DBPDCNT0_D: .long 0x00000001 -DBPDCNT1_D: .long 0x00000001 -DBPDCNT2_D: .long 0x00000000 -DBPDCNT3_D: .long 0x00004010 -DBPDLCK_D: .long 0x0000a55a -DBPDRGA_D: .long 0x00000028 -DBPDRGD_D: .long 0x00017100 - -DBADJ0_D: .long 0x00000000 -DBADJ1_D: .long 0x00000000 -DBADJ2_D: .long 0x18061806 -DBRFCNF0_D: .long 0x000001ff -DBRFCNF1_D: .long 0x08001000 -DBRFCNF2_D: .long 0x00000000 -DBCALCNF_D: .long 0x0000ffff -DBRFEN_D: .long 0x00000001 -DBACEN_D: .long 0x00000001 - -/*------- DDR-ECC -------*/ -ECD_ECDEN_A: .long 0xffc1012c -ECD_ECDEN_D: .long 0x00000001 -ECD_INTSR_A: .long 0xfe900024 -ECD_INTSR_D: .long 0xffffffff -ECD_SPACER_A: .long 0xfe900018 -ECD_SPACER_D: .long SH7757LCR_SDRAM_ECC_SETTING -ECD_MCR_A: .long 0xfe900010 -ECD_MCR_D: .long 0x00000001 - - .align 2 -exit_ddr: - -#if defined(CONFIG_SH_32BIT) - /*------- set PMB -------*/ - write32 PASCR_A, PASCR_29BIT_D - write32 MMUCR_A, MMUCR_D - - /***************************************************************** - * ent virt phys v sz c wt - * 0 0xa0000000 0x00000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - */ - write32 PMB_ADDR_SPIBOOT_A, PMB_ADDR_SPIBOOT_D - write32 PMB_DATA_SPIBOOT_A, PMB_DATA_SPIBOOT_D - write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D - write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D - write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D - write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D - - write32 PMB_ADDR_ENTRY2, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY3, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY4, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY6, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY7, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY8, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY9, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY10, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY11, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY12, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY13, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY14, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY15, PMB_ADDR_NOT_USE_D - - write32 PASCR_A, PASCR_INIT - mov.l DUMMY_ADDR, r0 - icbi @r0 -#endif /* if defined(CONFIG_SH_32BIT) */ - -exit_pmb: - /* CPU is running on ILRAM? */ - mov r14, r0 - tst #1, r0 - bt 1f - - mov.l _bss_start, r15 - mov.l _spiboot_main, r0 -100: bsrf r0 - nop - - .align 2 -_spiboot_main: .long (spiboot_main - (100b + 4)) -_bss_start: .long bss_start - -1: - - write32 CCR_A, CCR_D - - rts - nop - - .align 4 - -#if defined(CONFIG_SH_32BIT) -/*------- set PMB -------*/ -PMB_ADDR_SPIBOOT_A: .long PMB_ADDR_BASE(0) -PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(1) -PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(5) -PMB_ADDR_ENTRY2: .long PMB_ADDR_BASE(2) -PMB_ADDR_ENTRY3: .long PMB_ADDR_BASE(3) -PMB_ADDR_ENTRY4: .long PMB_ADDR_BASE(4) -PMB_ADDR_ENTRY6: .long PMB_ADDR_BASE(6) -PMB_ADDR_ENTRY7: .long PMB_ADDR_BASE(7) -PMB_ADDR_ENTRY8: .long PMB_ADDR_BASE(8) -PMB_ADDR_ENTRY9: .long PMB_ADDR_BASE(9) -PMB_ADDR_ENTRY10: .long PMB_ADDR_BASE(10) -PMB_ADDR_ENTRY11: .long PMB_ADDR_BASE(11) -PMB_ADDR_ENTRY12: .long PMB_ADDR_BASE(12) -PMB_ADDR_ENTRY13: .long PMB_ADDR_BASE(13) -PMB_ADDR_ENTRY14: .long PMB_ADDR_BASE(14) -PMB_ADDR_ENTRY15: .long PMB_ADDR_BASE(15) - -PMB_ADDR_SPIBOOT_D: .long mk_pmb_addr_val(0xa0) -PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88) -PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8) -PMB_ADDR_NOT_USE_D: .long 0x00000000 - -PMB_DATA_SPIBOOT_A: .long PMB_DATA_BASE(0) -PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(1) -PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(5) - -/* ppn ub v s1 s0 c wt */ -PMB_DATA_SPIBOOT_D: .long mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1) -PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1) -PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1) - -PASCR_A: .long 0xff000070 -DUMMY_ADDR: .long 0xa0000000 -PASCR_29BIT_D: .long 0x00000000 -PASCR_INIT: .long 0x80000080 -MMUCR_A: .long 0xff000010 -MMUCR_D: .long 0x00000004 /* clear ITLB */ -#endif /* CONFIG_SH_32BIT */ - -CCR_A: .long CCR -CCR_D: .long CCR_CACHE_INIT diff --git a/board/renesas/sh7757lcr/sh7757lcr.c b/board/renesas/sh7757lcr/sh7757lcr.c deleted file mode 100644 index e933e3e7306..00000000000 --- a/board/renesas/sh7757lcr/sh7757lcr.c +++ /dev/null @@ -1,433 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011 Renesas Solutions Corp. - */ - -#include <common.h> -#include <command.h> -#include <env.h> -#include <flash.h> -#include <init.h> -#include <malloc.h> -#include <net.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/mmc.h> -#include <spi.h> -#include <spi_flash.h> - -int checkboard(void) -{ - puts("BOARD: R0P7757LC0030RL board\n"); - - return 0; -} - -static void init_gctrl(void) -{ - struct gctrl_regs *gctrl = GCTRL_BASE; - unsigned long graofst; - - graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24; - writel(graofst | 0x20000f00, &gctrl->gracr3); -} - -static int init_pcie_bridge_from_spi(void *buf, size_t size) -{ -#ifdef CONFIG_DEPRECATED - struct spi_flash *spi; - int ret; - unsigned long pcie_addr; - - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (!spi) { - printf("%s: spi_flash probe error.\n", __func__); - return 1; - } - - if (is_sh7757_b0()) - pcie_addr = SH7757LCR_PCIEBRG_ADDR_B0; - else - pcie_addr = SH7757LCR_PCIEBRG_ADDR; - - ret = spi_flash_read(spi, pcie_addr, size, buf); - if (ret) { - printf("%s: spi_flash read error.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); - - return 0; -#else - printf("No SPI support so no PCIe support\n"); - return 1; -#endif -} - -static void init_pcie_bridge(void) -{ - struct pciebrg_regs *pciebrg = PCIEBRG_BASE; - struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE; - int i; - unsigned char *data; - unsigned short tmp; - unsigned long pcie_size; - - if (!(readw(&pciebrg->ctrl_h8s) & 0x0001)) - return; - - if (is_sh7757_b0()) - pcie_size = SH7757LCR_PCIEBRG_SIZE_B0; - else - pcie_size = SH7757LCR_PCIEBRG_SIZE; - - data = malloc(pcie_size); - if (!data) { - printf("%s: malloc error.\n", __func__); - return; - } - if (init_pcie_bridge_from_spi(data, pcie_size)) { - free(data); - return; - } - - if (data[0] == 0xff && data[1] == 0xff && data[2] == 0xff && - data[3] == 0xff) { - free(data); - printf("%s: skipped initialization\n", __func__); - return; - } - - writew(0xa501, &pciebrg->ctrl_h8s); /* reset */ - writew(0x0000, &pciebrg->cp_ctrl); - writew(0x0000, &pciebrg->cp_addr); - - for (i = 0; i < pcie_size; i += 2) { - tmp = (data[i] << 8) | data[i + 1]; - writew(tmp, &pciebrg->cp_data); - } - - writew(0xa500, &pciebrg->ctrl_h8s); /* start */ - if (!is_sh7757_b0()) - writel(0x00000001, &pcie_setup->pbictl3); - - free(data); -} - -static void init_usb_phy(void) -{ - struct usb_common_regs *common0 = USB0_COMMON_BASE; - struct usb_common_regs *common1 = USB1_COMMON_BASE; - struct usb0_phy_regs *phy = USB0_PHY_BASE; - struct usb1_port_regs *port = USB1_PORT_BASE; - struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE; - - writew(0x0100, &phy->reset); /* set reset */ - /* port0 = USB0, port1 = USB1 */ - writew(0x0002, &phy->portsel); - writel(0x0001, &port->port1sel); /* port1 = Host */ - writew(0x0111, &phy->reset); /* clear reset */ - - writew(0x4000, &common0->suspmode); - writew(0x4000, &common1->suspmode); - -#if defined(__LITTLE_ENDIAN) - writel(0x00000000, &align->ehcidatac); - writel(0x00000000, &align->ohcidatac); -#endif -} - -static void set_mac_to_sh_eth_register(int channel, char *mac_string) -{ - struct ether_mac_regs *ether; - unsigned char mac[6]; - unsigned long val; - - string_to_enetaddr(mac_string, mac); - - if (!channel) - ether = ETHER0_MAC_BASE; - else - ether = ETHER1_MAC_BASE; - - val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; - writel(val, ðer->mahr); - val = (mac[4] << 8) | mac[5]; - writel(val, ðer->malr); -} - -static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) -{ - struct ether_mac_regs *ether; - unsigned char mac[6]; - unsigned long val; - - string_to_enetaddr(mac_string, mac); - - if (!channel) - ether = GETHER0_MAC_BASE; - else - ether = GETHER1_MAC_BASE; - - val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; - writel(val, ðer->mahr); - val = (mac[4] << 8) | mac[5]; - writel(val, ðer->malr); -} - -/***************************************************************** - * This PMB must be set on this timing. The lowlevel_init is run on - * Area 0(phys 0x00000000), so we have to map it. - * - * The new PMB table is following: - * ent virt phys v sz c wt - * 0 0xa0000000 0x40000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 2 0xb0000000 0x50000000 1 128M 0 1 - * 3 0xb8000000 0x58000000 1 128M 0 1 - * 4 0x80000000 0x40000000 1 128M 1 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - * 6 0x90000000 0x50000000 1 128M 1 1 - * 7 0x98000000 0x58000000 1 128M 1 1 - */ -static void set_pmb_on_board_init(void) -{ - struct mmu_regs *mmu = MMU_BASE; - - /* clear ITLB */ - writel(0x00000004, &mmu->mmucr); - - /* delete PMB for SPIBOOT */ - writel(0, PMB_ADDR_BASE(0)); - writel(0, PMB_DATA_BASE(0)); - - /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */ - /* ppn ub v s1 s0 c wt */ - writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0)); - writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0)); - writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2)); - writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2)); - writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3)); - writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3)); - writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4)); - writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4)); - writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6)); - writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6)); - writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7)); - writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7)); -} - -int board_init(void) -{ - struct gether_control_regs *gether = GETHER_CONTROL_BASE; - - set_pmb_on_board_init(); - - /* enable RMII's MDIO (disable GRMII's MDIO) */ - writel(0x00030000, &gether->gbecont); - - init_gctrl(); - init_usb_phy(); - - return 0; -} - -int board_mmc_init(struct bd_info *bis) -{ - return mmcif_mmc_init(); -} - -static int get_sh_eth_mac_raw(unsigned char *buf, int size) -{ -#ifdef CONFIG_DEPRECATED - struct spi_flash *spi; - int ret; - - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (spi == NULL) { - printf("%s: spi_flash probe error.\n", __func__); - return 1; - } - - ret = spi_flash_read(spi, SH7757LCR_ETHERNET_MAC_BASE, size, buf); - if (ret) { - printf("%s: spi_flash read error.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); -#endif - - return 0; -} - -static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf) -{ - memcpy(mac_string, &buf[channel * (SH7757LCR_ETHERNET_MAC_SIZE + 1)], - SH7757LCR_ETHERNET_MAC_SIZE); - mac_string[SH7757LCR_ETHERNET_MAC_SIZE] = 0x00; /* terminate */ - - return 0; -} - -static void init_ethernet_mac(void) -{ - char mac_string[64]; - char env_string[64]; - int i; - unsigned char *buf; - - buf = malloc(256); - if (!buf) { - printf("%s: malloc error.\n", __func__); - return; - } - get_sh_eth_mac_raw(buf, 256); - - /* Fast Ethernet */ - for (i = 0; i < SH7757LCR_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i, mac_string, buf); - if (i == 0) - env_set("ethaddr", mac_string); - else { - sprintf(env_string, "eth%daddr", i); - env_set(env_string, mac_string); - } - - set_mac_to_sh_eth_register(i, mac_string); - } - - /* Gigabit Ethernet */ - for (i = 0; i < SH7757LCR_GIGA_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i + SH7757LCR_ETHERNET_NUM_CH, mac_string, buf); - sprintf(env_string, "eth%daddr", i + SH7757LCR_ETHERNET_NUM_CH); - env_set(env_string, mac_string); - - set_mac_to_sh_giga_eth_register(i, mac_string); - } - - free(buf); -} - -static void init_pcie(void) -{ - struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE; - struct pcie_system_bus_regs *pcie_sysbus = PCIE_SYSTEM_BUS_BASE; - - writel(0x00000ff2, &pcie_setup->ladmsk0); - writel(0x00000001, &pcie_setup->barmap); - writel(0xffcaa000, &pcie_setup->lad0); - writel(0x00030000, &pcie_sysbus->endictl0); - writel(0x00000003, &pcie_sysbus->endictl1); - writel(0x00000004, &pcie_setup->pbictl2); -} - -static void finish_spiboot(void) -{ - struct gctrl_regs *gctrl = GCTRL_BASE; - /* - * SH7757 B0 does not use LBSC. - * So if we set SPIBOOTCAN to 1, SH7757 can not access Area0. - * This setting is not cleared by manual reset, So we have to set it - * to 0. - */ - writel(0x00000000, &gctrl->spibootcan); -} - -int board_late_init(void) -{ - init_ethernet_mac(); - init_pcie_bridge(); - init_pcie(); - finish_spiboot(); - - return 0; -} - -int do_sh_g200(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - struct gctrl_regs *gctrl = GCTRL_BASE; - unsigned long graofst; - - writel(0xfedcba98, &gctrl->wprotect); - graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24; - writel(graofst | 0xa0000f00, &gctrl->gracr3); - - return 0; -} - -U_BOOT_CMD( - sh_g200, 1, 1, do_sh_g200, - "enable sh-g200", - "enable SH-G200 bus (disable PCIe-G200)" -); - -#ifdef CONFIG_DEPRECATED -int do_write_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - int i, ret; - char mac_string[256]; - struct spi_flash *spi; - unsigned char *buf; - - if (argc != 5) { - buf = malloc(256); - if (!buf) { - printf("%s: malloc error.\n", __func__); - return 1; - } - - get_sh_eth_mac_raw(buf, 256); - - /* print current MAC address */ - for (i = 0; i < 4; i++) { - get_sh_eth_mac(i, mac_string, buf); - if (i < 2) - printf(" ETHERC ch%d = %s\n", i, mac_string); - else - printf("GETHERC ch%d = %s\n", i-2, mac_string); - } - free(buf); - return 0; - } - - /* new setting */ - memset(mac_string, 0xff, sizeof(mac_string)); - sprintf(mac_string, "%s\t%s\t%s\t%s", - argv[1], argv[2], argv[3], argv[4]); - - /* write MAC data to SPI rom */ - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (!spi) { - printf("%s: spi_flash probe error.\n", __func__); - return 1; - } - - ret = spi_flash_erase(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI, - SH7757LCR_SPI_SECTOR_SIZE); - if (ret) { - printf("%s: spi_flash erase error.\n", __func__); - return 1; - } - - ret = spi_flash_write(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI, - sizeof(mac_string), mac_string); - if (ret) { - printf("%s: spi_flash write error.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); - - puts("The writing of the MAC address to SPI ROM was completed.\n"); - - return 0; -} - -U_BOOT_CMD( - write_mac, 5, 1, do_write_mac, - "write MAC address for ETHERC/GETHERC", - "[ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]\n" -); -#endif diff --git a/board/renesas/sh7757lcr/spi-boot.c b/board/renesas/sh7757lcr/spi-boot.c deleted file mode 100644 index 71dcf5d4454..00000000000 --- a/board/renesas/sh7757lcr/spi-boot.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright (C) 2011 Renesas Solutions Corp. - * - * This file is subject to the terms and conditions of the GNU Lesser - * General Public License. See the file "COPYING.LIB" in the main - * directory of this archive for more details. - */ - -#include <common.h> - -#define CONFIG_RAM_BOOT_PHYS 0x4ef80000 -#if defined(CONFIG_SH7757_OFFSET_SPI) -#define CONFIG_SPI_ADDR 0x00010000 -#else -#define CONFIG_SPI_ADDR 0x00000000 -#endif -#define CONFIG_SPI_LENGTH 0x00030000 -#define CONFIG_RAM_BOOT 0x8ef80000 - -#define SPIWDMADR 0xFE001018 -#define SPIWDMCNTR 0xFE001020 -#define SPIDMCOR 0xFE001028 -#define SPIDMINTSR 0xFE001188 -#define SPIDMINTMR 0xFE001190 - -#define SPIDMINTSR_DMEND 0x00000004 - -#define TBR 0xFE002000 -#define RBR 0xFE002000 - -#define CR1 0xFE002008 -#define CR2 0xFE002010 -#define CR3 0xFE002018 -#define CR4 0xFE002020 - -/* CR1 */ -#define SPI_TBE 0x80 -#define SPI_TBF 0x40 -#define SPI_RBE 0x20 -#define SPI_RBF 0x10 -#define SPI_PFONRD 0x08 -#define SPI_SSDB 0x04 -#define SPI_SSD 0x02 -#define SPI_SSA 0x01 - -/* CR2 */ -#define SPI_RSTF 0x80 -#define SPI_LOOPBK 0x40 -#define SPI_CPOL 0x20 -#define SPI_CPHA 0x10 -#define SPI_L1M0 0x08 - -/* CR4 */ -#define SPI_TBEI 0x80 -#define SPI_TBFI 0x40 -#define SPI_RBEI 0x20 -#define SPI_RBFI 0x10 -#define SPI_SSS 0x01 - -#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val -#define spi_read(addr) (*(volatile unsigned long *)(addr)) - -/* M25P80 */ -#define M25_READ 0x03 - -#define __uses_spiboot2 __attribute__((section(".spiboot2.text"))) -static void __uses_spiboot2 spi_reset(void) -{ - spi_write(0xfe, CR1); - - spi_write(0, SPIDMCOR); - spi_write(0x00, CR1); - - spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */ - spi_write(spi_read(CR2) & ~SPI_RSTF, CR2); -} - -static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr, - unsigned long len) -{ - spi_write(M25_READ, TBR); - spi_write((addr >> 16) & 0xFF, TBR); - spi_write((addr >> 8) & 0xFF, TBR); - spi_write(addr & 0xFF, TBR); - - spi_write(SPIDMINTSR_DMEND, SPIDMINTSR); - spi_write((unsigned long)buf, SPIWDMADR); - spi_write(len & 0xFFFFFFE0, SPIWDMCNTR); - spi_write(1, SPIDMCOR); - - spi_write(0xff, CR3); - spi_write(spi_read(CR1) | SPI_SSDB, CR1); - spi_write(spi_read(CR1) | SPI_SSA, CR1); - - while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND)) - ; -} - -void __uses_spiboot2 spiboot_main(void) -{ - void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE; - - spi_reset(); - spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, - CONFIG_SPI_LENGTH); - - _start(); -} diff --git a/board/renesas/sh7763rdp/Kconfig b/board/renesas/sh7763rdp/Kconfig deleted file mode 100644 index 101d2b5a32e..00000000000 --- a/board/renesas/sh7763rdp/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SH7763RDP - -config SYS_BOARD - default "sh7763rdp" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "sh7763rdp" - -endif diff --git a/board/renesas/sh7763rdp/MAINTAINERS b/board/renesas/sh7763rdp/MAINTAINERS deleted file mode 100644 index 6ee8f9f87bc..00000000000 --- a/board/renesas/sh7763rdp/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -SH7763RDP BOARD -M: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> -M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> -S: Maintained -F: board/renesas/sh7763rdp/ -F: include/configs/sh7763rdp.h -F: configs/sh7763rdp_defconfig diff --git a/board/renesas/sh7763rdp/Makefile b/board/renesas/sh7763rdp/Makefile deleted file mode 100644 index 0db63c5d2bb..00000000000 --- a/board/renesas/sh7763rdp/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2008 Renesas Solutions Corp. -# Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> -# Copyright (C) 2007 Kenati Technologies, Inc. -# -# board/sh7763rdp/Makefile - -obj-y := sh7763rdp.o -extra-y += lowlevel_init.o diff --git a/board/renesas/sh7763rdp/lowlevel_init.S b/board/renesas/sh7763rdp/lowlevel_init.S deleted file mode 100644 index 80ef2580515..00000000000 --- a/board/renesas/sh7763rdp/lowlevel_init.S +++ /dev/null @@ -1,259 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> - * Copyright (C) 2007 Kenati Technologies, Inc. - * - * board/sh7763rdp/lowlevel_init.S - */ - -#include <config.h> - -#include <asm/processor.h> -#include <asm/macro.h> - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - - write32 WDTCSR_A, WDTCSR_D /* Watchdog Control / Status Register */ - - write32 WDTST_A, WDTST_D /* Watchdog Stop Time Register */ - - write32 WDTBST_A, WDTBST_D /* - * 0xFFCC0008 - * Watchdog Base Stop Time Register - */ - - write32 CCR_A, CCR_CACHE_ICI_D /* Address of Cache Control Register */ - /* Instruction Cache Invalidate */ - - write32 MMUCR_A, MMU_CONTROL_TI_D /* MMU Control Register */ - /* TI == TLB Invalidate bit */ - - write32 MSTPCR0_A, MSTPCR0_D /* Address of Power Control Register 0 */ - - write32 MSTPCR1_A, MSTPCR1_D /* Address of Power Control Register 1 */ - - write32 RAMCR_A, RAMCR_D - - mov.l MMSELR_A, r1 - mov.l MMSELR_D, r0 - synco - mov.l r0, @r1 - - mov.l @r1, r2 /* execute two reads after setting MMSELR */ - mov.l @r1, r2 - synco - - /* issue memory read */ - mov.l DDRSD_START_A, r1 /* memory address to read*/ - mov.l @r1, r0 - synco - - write32 MIM8_A, MIM8_D - - write32 MIMC_A, MIMC_D1 - - write32 STRC_A, STRC_D - - write32 SDR4_A, SDR4_D - - write32 MIMC_A, MIMC_D2 - - nop - nop - nop - - write32 SCR4_A, SCR4_D3 - - write32 SCR4_A, SCR4_D2 - - write32 SDMR02000_A, SDMR02000_D - - write32 SDMR00B08_A, SDMR00B08_D - - write32 SCR4_A, SCR4_D2 - - write32 SCR4_A, SCR4_D4 - - nop - nop - nop - nop - - write32 SCR4_A, SCR4_D4 - - nop - nop - nop - nop - - write32 SDMR00308_A, SDMR00308_D - - write32 MIMC_A, MIMC_D3 - - mov.l SCR4_A, r1 - mov.l SCR4_D1, r0 - mov.l DELAY60_D, r3 - -delay_loop_60: - mov.l r0, @r1 - dt r3 - bf delay_loop_60 - nop - - write32 CCR_A, CCR_CACHE_D_2 /* Address of Cache Control Register */ - -bsc_init: - write32 BCR_A, BCR_D - - write32 CS0BCR_A, CS0BCR_D - - write32 CS1BCR_A, CS1BCR_D - - write32 CS2BCR_A, CS2BCR_D - - write32 CS4BCR_A, CS4BCR_D - - write32 CS5BCR_A, CS5BCR_D - - write32 CS6BCR_A, CS6BCR_D - - write32 CS0WCR_A, CS0WCR_D - - write32 CS1WCR_A, CS1WCR_D - - write32 CS2WCR_A, CS2WCR_D - - write32 CS4WCR_A, CS4WCR_D - - write32 CS5WCR_A, CS5WCR_D - - write32 CS6WCR_A, CS6WCR_D - - write32 CS5PCR_A, CS5PCR_D - - write32 CS6PCR_A, CS6PCR_D - - mov.l DELAY200_D, r3 - -delay_loop_200: - dt r3 - bf delay_loop_200 - nop - - write16 PSEL0_A, PSEL0_D - - write16 PSEL1_A, PSEL1_D - - write32 ICR0_A, ICR0_D - - stc sr, r0 /* BL bit off(init=ON) */ - mov.l SR_MASK_D, r1 - and r1, r0 - ldc r0, sr - - rts - nop - - .align 2 - -DELAY60_D: .long 60 -DELAY200_D: .long 17800 - -CCR_A: .long 0xFF00001C -MMUCR_A: .long 0xFF000010 -RAMCR_A: .long 0xFF000074 - -/* Low power mode control */ -MSTPCR0_A: .long 0xFFC80030 -MSTPCR1_A: .long 0xFFC80038 - -/* RWBT */ -WDTST_A: .long 0xFFCC0000 -WDTCSR_A: .long 0xFFCC0004 -WDTBST_A: .long 0xFFCC0008 - -/* BSC */ -MMSELR_A: .long 0xFE600020 -BCR_A: .long 0xFF801000 -CS0BCR_A: .long 0xFF802000 -CS1BCR_A: .long 0xFF802010 -CS2BCR_A: .long 0xFF802020 -CS4BCR_A: .long 0xFF802040 -CS5BCR_A: .long 0xFF802050 -CS6BCR_A: .long 0xFF802060 -CS0WCR_A: .long 0xFF802008 -CS1WCR_A: .long 0xFF802018 -CS2WCR_A: .long 0xFF802028 -CS4WCR_A: .long 0xFF802048 -CS5WCR_A: .long 0xFF802058 -CS6WCR_A: .long 0xFF802068 -CS5PCR_A: .long 0xFF802070 -CS6PCR_A: .long 0xFF802080 -DDRSD_START_A: .long 0xAC000000 - -/* INTC */ -ICR0_A: .long 0xFFD00000 - -/* DDR I/F */ -MIM8_A: .long 0xFE800008 -MIMC_A: .long 0xFE80000C -SCR4_A: .long 0xFE800014 -STRC_A: .long 0xFE80001C -SDR4_A: .long 0xFE800034 -SDMR00308_A: .long 0xFE900308 -SDMR00B08_A: .long 0xFE900B08 -SDMR02000_A: .long 0xFE902000 - -/* GPIO */ -PSEL0_A: .long 0xFFEF0070 -PSEL1_A: .long 0xFFEF0072 - -CCR_CACHE_ICI_D:.long 0x00000800 -CCR_CACHE_D_2: .long 0x00000103 -MMU_CONTROL_TI_D:.long 0x00000004 -RAMCR_D: .long 0x00000200 -MSTPCR0_D: .long 0x00000000 -MSTPCR1_D: .long 0x00000000 - -MMSELR_D: .long 0xa5a50000 -BCR_D: .long 0x00000000 -CS0BCR_D: .long 0x77777770 -CS1BCR_D: .long 0x77777670 -CS2BCR_D: .long 0x77777670 -CS4BCR_D: .long 0x77777670 -CS5BCR_D: .long 0x77777670 -CS6BCR_D: .long 0x77777670 -CS0WCR_D: .long 0x7777770F -CS1WCR_D: .long 0x22000002 -CS2WCR_D: .long 0x7777770F -CS4WCR_D: .long 0x7777770F -CS5WCR_D: .long 0x7777770F -CS6WCR_D: .long 0x7777770F -CS5PCR_D: .long 0x77000000 -CS6PCR_D: .long 0x77000000 -ICR0_D: .long 0x00E00000 -MIM8_D: .long 0x00000000 -MIMC_D1: .long 0x01d10008 -MIMC_D2: .long 0x01d10009 -MIMC_D3: .long 0x01d10209 -SCR4_D1: .long 0x00000001 -SCR4_D2: .long 0x00000002 -SCR4_D3: .long 0x00000003 -SCR4_D4: .long 0x00000004 -STRC_D: .long 0x000f3980 -SDR4_D: .long 0x00000300 -SDMR00308_D: .long 0x00000000 -SDMR00B08_D: .long 0x00000000 -SDMR02000_D: .long 0x00000000 -PSEL0_D: .word 0x00000001 -PSEL1_D: .word 0x00000244 -SR_MASK_D: .long 0xEFFFFF0F -WDTST_D: .long 0x5A000FFF -WDTCSR_D: .long 0xA5000000 -WDTBST_D: .long 0x55000000 diff --git a/board/renesas/sh7763rdp/sh7763rdp.c b/board/renesas/sh7763rdp/sh7763rdp.c deleted file mode 100644 index 73a53c1e5ac..00000000000 --- a/board/renesas/sh7763rdp/sh7763rdp.c +++ /dev/null @@ -1,54 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> - * Copyright (C) 2007 Kenati Technologies, Inc. - * - * board/sh7763rdp/sh7763rdp.c - */ - -#include <common.h> -#include <init.h> -#include <asm/io.h> -#include <asm/processor.h> - -#define CPU_CMDREG 0xB1000006 -#define PDCR 0xffef0006 -#define PECR 0xffef0008 -#define PFCR 0xffef000a -#define PGCR 0xffef000c -#define PHCR 0xffef000e -#define PJCR 0xffef0012 -#define PKCR 0xffef0014 -#define PLCR 0xffef0016 -#define PMCR 0xffef0018 -#define PSEL1 0xffef0072 -#define PSEL2 0xffef0074 -#define PSEL3 0xffef0076 - -int checkboard(void) -{ - puts("BOARD: Renesas SH7763 RDP\n"); - return 0; -} - -int board_init(void) -{ - vu_short dat; - - /* Enable mode */ - writew(inw(CPU_CMDREG)|0x0001, CPU_CMDREG); - - /* GPIO Setting (eth1) */ - dat = inw(PSEL1); - writew(((dat & ~0xff00) | 0x2400), PSEL1); - writew(0, PFCR); - writew(0, PGCR); - writew(0, PHCR); - - return 0; -} - -void led_set_state(unsigned short value) -{ -} |