diff options
Diffstat (limited to 'board/ti/ti816x/evm.c')
| -rw-r--r-- | board/ti/ti816x/evm.c | 192 |
1 files changed, 42 insertions, 150 deletions
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c index b6bf16236f4..ad98e09e208 100644 --- a/board/ti/ti816x/evm.c +++ b/board/ti/ti816x/evm.c @@ -41,176 +41,68 @@ static struct module_pin_mux mmc_pin_mux[] = { { -1 }, }; -const struct dmm_lisa_map_regs evm_lisa_map_regs = { - .dmm_lisa_map_0 = 0x00000000, - .dmm_lisa_map_1 = 0x00000000, - .dmm_lisa_map_2 = 0x80640300, - .dmm_lisa_map_3 = 0xC0640320, -}; - -/* - * DDR2 related definitions - */ -#ifdef CONFIG_TI816X_EVM_DDR2 -static struct ddr_data ddr2_data = { - .datardsratio0 = ((0x40<<10) | (0x40<<0)), - .datawdsratio0 = ((0x4A<<10) | (0x4A<<0)), - .datawiratio0 = ((0x0<<10) | (0x0<<0)), - .datagiratio0 = ((0x0<<10) | (0x0<<0)), - .datafwsratio0 = ((0x13A<<10) | (0x13A<<0)), - .datawrsratio0 = ((0x8A<<10) | (0x8A<<0)), -}; - -static struct cmd_control ddr2_ctrl = { - .cmd0csratio = 0x80, - .cmd0iclkout = 0x00, - - .cmd1csratio = 0x80, - .cmd1iclkout = 0x00, - - .cmd2csratio = 0x80, - .cmd2iclkout = 0x00, - -}; - -static struct emif_regs ddr2_emif0_regs = { - .sdram_config = 0x43801A3A, - .ref_ctrl = 0x10000C30, - .sdram_tim1 = 0x0AAB15E2, - .sdram_tim2 = 0x423631D2, - .sdram_tim3 = 0x0080032F, - .emif_ddr_phy_ctlr_1 = 0x0, /* depend on cpu rev, set later */ -}; +void set_uart_mux_conf(void) {} -static struct emif_regs ddr2_emif1_regs = { - .sdram_config = 0x43801A3A, - .ref_ctrl = 0x10000C30, - .sdram_tim1 = 0x0AAB15E2, - .sdram_tim2 = 0x423631D2, - .sdram_tim3 = 0x0080032F, - .emif_ddr_phy_ctlr_1 = 0x0, /* depend on cpu rev, set later */ -}; -#endif +void set_mux_conf_regs(void) +{ + configure_module_pin_mux(mmc_pin_mux); +} /* - * DDR3 related definitions + * EMIF Paramters. Refer the EMIF register documentation and the + * memory datasheet for details. This is for 796 MHz. */ - -#if defined(CONFIG_TI816X_DDR_PLL_400) -#define RD_DQS 0x03B -#define WR_DQS 0x0A6 -#define RD_DQS_GATE 0x12A -#define EMIF_SDCFG 0x62A41032 -#define EMIF_SDREF 0x10000C30 -#define EMIF_TIM1 0x0CCCE524 -#define EMIF_TIM2 0x30308023 -#define EMIF_TIM3 0x009F82CF -#define EMIF_PHYCFG 0x0000010B -#elif defined(CONFIG_TI816X_DDR_PLL_531) -#define RD_DQS 0x039 -#define WR_DQS 0x0B4 -#define RD_DQS_GATE 0x13D -#define EMIF_SDCFG 0x62A51832 -#define EMIF_SDREF 0x1000102E -#define EMIF_TIM1 0x0EF136AC -#define EMIF_TIM2 0x30408063 -#define EMIF_TIM3 0x009F83AF -#define EMIF_PHYCFG 0x0000010C -#elif defined(CONFIG_TI816X_DDR_PLL_675) -#define RD_DQS 0x039 -#define WR_DQS 0x091 -#define RD_DQS_GATE 0x196 -#define EMIF_SDCFG 0x62A63032 -#define EMIF_SDREF 0x10001491 -#define EMIF_TIM1 0x13358875 -#define EMIF_TIM2 0x5051806C -#define EMIF_TIM3 0x009F84AF -#define EMIF_PHYCFG 0x0000010F -#elif defined(CONFIG_TI816X_DDR_PLL_796) -#define RD_DQS 0x035 -#define WR_DQS 0x093 -#define RD_DQS_GATE 0x1B3 -#define EMIF_SDCFG 0x62A73832 -#define EMIF_SDREF 0x10001841 -#define EMIF_TIM1 0x1779C9FE -#define EMIF_TIM2 0x50608074 -#define EMIF_TIM3 0x009F857F -#define EMIF_PHYCFG 0x00000110 -#endif - -static struct ddr_data ddr3_data = { - .datardsratio0 = ((RD_DQS<<10) | (RD_DQS<<0)), - .datawdsratio0 = ((WR_DQS<<10) | (WR_DQS<<0)), - .datawiratio0 = ((0x20<<10) | 0x20<<0), - .datagiratio0 = ((0x20<<10) | 0x20<<0), - .datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)), - .datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)), +#define EMIF_TIM1 0x1779C9FE +#define EMIF_TIM2 0x50608074 +#define EMIF_TIM3 0x009F857F +#define EMIF_SDREF 0x10001841 +#define EMIF_SDCFG 0x62A73832 +#define EMIF_PHYCFG 0x00000110 +static const struct emif_regs ddr3_emif_regs = { + .sdram_config = EMIF_SDCFG, + .ref_ctrl = EMIF_SDREF, + .sdram_tim1 = EMIF_TIM1, + .sdram_tim2 = EMIF_TIM2, + .sdram_tim3 = EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = EMIF_PHYCFG, }; static const struct cmd_control ddr3_ctrl = { .cmd0csratio = 0x100, .cmd0iclkout = 0x001, - .cmd1csratio = 0x100, .cmd1iclkout = 0x001, - .cmd2csratio = 0x100, .cmd2iclkout = 0x001, }; -static const struct emif_regs ddr3_emif0_regs = { - .sdram_config = EMIF_SDCFG, - .ref_ctrl = EMIF_SDREF, - .sdram_tim1 = EMIF_TIM1, - .sdram_tim2 = EMIF_TIM2, - .sdram_tim3 = EMIF_TIM3, - .emif_ddr_phy_ctlr_1 = EMIF_PHYCFG, +/* These values are obtained from the CCS app */ +#define RD_DQS_GATE (0x1B3) +#define RD_DQS (0x35) +#define WR_DQS (0x93) +static struct ddr_data ddr3_data = { + .datardsratio0 = ((RD_DQS<<10) | (RD_DQS<<0)), + .datawdsratio0 = ((WR_DQS<<10) | (WR_DQS<<0)), + .datawiratio0 = ((0x20<<10) | 0x20<<0), + .datagiratio0 = ((0x20<<10) | 0x20<<0), + .datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)), + .datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)), }; -static const struct emif_regs ddr3_emif1_regs = { - .sdram_config = EMIF_SDCFG, - .ref_ctrl = EMIF_SDREF, - .sdram_tim1 = EMIF_TIM1, - .sdram_tim2 = EMIF_TIM2, - .sdram_tim3 = EMIF_TIM3, - .emif_ddr_phy_ctlr_1 = EMIF_PHYCFG, +static const struct dmm_lisa_map_regs evm_lisa_map_regs = { + .dmm_lisa_map_0 = 0x00000000, + .dmm_lisa_map_1 = 0x00000000, + .dmm_lisa_map_2 = 0x80640300, + .dmm_lisa_map_3 = 0xC0640320, }; -void set_uart_mux_conf(void) {} - -void set_mux_conf_regs(void) -{ - configure_module_pin_mux(mmc_pin_mux); -} - void sdram_init(void) { - config_dmm(&evm_lisa_map_regs); - -#ifdef CONFIG_TI816X_EVM_DDR2 - if (CONFIG_TI816X_USE_EMIF0) { - ddr2_emif0_regs.emif_ddr_phy_ctlr_1 = - (get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B); - config_ddr(0, NULL, &ddr2_data, &ddr2_ctrl, &ddr2_emif0_regs, - 0); - } - - if (CONFIG_TI816X_USE_EMIF1) { - ddr2_emif1_regs.emif_ddr_phy_ctlr_1 = - (get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B); - config_ddr(1, NULL, &ddr2_data, &ddr2_ctrl, &ddr2_emif1_regs, - 1); - } -#endif - -#ifdef CONFIG_TI816X_EVM_DDR3 - if (CONFIG_TI816X_USE_EMIF0) - config_ddr(0, NULL, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, - 0); - - if (CONFIG_TI816X_USE_EMIF1) - config_ddr(1, NULL, &ddr3_data, &ddr3_ctrl, &ddr3_emif1_regs, - 1); -#endif + /* + * Pass in our DDR3 config information and that we have 2 EMIFs to + * configure. + */ + config_ddr(&ddr3_data, &ddr3_ctrl, &ddr3_emif_regs, + &evm_lisa_map_regs, 2); } #endif /* CONFIG_SPL_BUILD */ |