aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/esd/ar405/ar405.c187
-rw-r--r--board/esd/canbt/canbt.c199
-rw-r--r--board/esd/du405/du405.c200
3 files changed, 586 insertions, 0 deletions
diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c
new file mode 100644
index 00000000000..f23b822665c
--- /dev/null
+++ b/board/esd/ar405/ar405.c
@@ -0,0 +1,187 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "ar405.h"
+#include <asm/processor.h>
+#include <command.h>
+#include <cmd_boot.h>
+
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+/* fpga configuration data - generated by bin2cc */
+const unsigned char fpgadata[] = {
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+int board_pre_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ int index, len, i;
+ int status;
+
+#ifdef FPGA_DEBUG
+ /* set up serial port with default baudrate */
+ (void) get_clocks ();
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init ();
+ console_init_f ();
+#endif
+
+ /*
+ * Boot onboard FPGA
+ */
+ status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
+ if (status != 0) {
+ /* booting FPGA failed */
+#ifndef FPGA_DEBUG
+ /* set up serial port with default baudrate */
+ (void) get_clocks ();
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init ();
+ console_init_f ();
+#endif
+ printf ("\nFPGA: Booting failed ");
+ switch (status) {
+ case ERROR_FPGA_PRG_INIT_LOW:
+ printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_INIT_HIGH:
+ printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_DONE:
+ printf ("(Timeout: DONE not high after programming FPGA)\n ");
+ break;
+ }
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i = 0; i < 4; i++) {
+ len = fpgadata[index];
+ printf ("FPGA: %s\n", &(fpgadata[index + 1]));
+ index += len + 3;
+ }
+ putc ('\n');
+ /* delayed reboot */
+ for (i = 20; i > 0; i--) {
+ printf ("Rebooting in %2d seconds \r", i);
+ for (index = 0; index < 1000; index++)
+ udelay (1000);
+ }
+ putc ('\n');
+ do_reset (NULL, 0, 0, NULL);
+ }
+
+ /*
+ * IRQ 0-15 405GP internally generated; active high; level sensitive
+ * IRQ 16 405GP internally generated; active low; level sensitive
+ * IRQ 17-24 RESERVED
+ * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+ */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ *(ushort *) 0xf03000ec = 0x0fff; /* enable all interrupts in fpga */
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ int index;
+ int len;
+ unsigned char str[64];
+ int i = getenv_r ("serial#", str, sizeof (str));
+
+ puts ("Board: ");
+
+ if (!i || strncmp (str, "AR405", 5)) {
+ puts ("### No HW ID - assuming AR405\n");
+ return (0);
+ }
+
+ puts (str);
+
+ puts ("\nFPGA: ");
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i = 0; i < 4; i++) {
+ len = fpgadata[index];
+ printf ("%s ", &(fpgadata[index + 1]));
+ index += len + 3;
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ return (16 * 1024 * 1024);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+ /* TODO: XXX XXX XXX */
+ printf ("test: 16 MB - ok\n");
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c
new file mode 100644
index 00000000000..bc7f0c70f0c
--- /dev/null
+++ b/board/esd/canbt/canbt.c
@@ -0,0 +1,199 @@
+/*
+ * (C) Copyright 2001
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "canbt.h"
+#include <asm/processor.h>
+#include <command.h>
+#include <cmd_boot.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+/* fpga configuration data */
+const unsigned char fpgadata[] = {
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+int board_pre_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ unsigned long cntrl0Reg;
+ int index, len, i;
+ int status;
+
+ /*
+ * Setup GPIO pins
+ */
+ cntrl0Reg = mfdcr (cntrl0) & 0xf0001fff;
+ cntrl0Reg |= 0x0070f000;
+ mtdcr (cntrl0, cntrl0Reg);
+
+#ifdef FPGA_DEBUG
+ /* set up serial port with default baudrate */
+ (void) get_clocks ();
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init ();
+ console_init_f ();
+#endif
+
+ /*
+ * Boot onboard FPGA
+ */
+ status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
+ if (status != 0) {
+ /* booting FPGA failed */
+#ifndef FPGA_DEBUG
+ /* set up serial port with default baudrate */
+ (void) get_clocks ();
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init ();
+ console_init_f ();
+#endif
+ printf ("\nFPGA: Booting failed ");
+ switch (status) {
+ case ERROR_FPGA_PRG_INIT_LOW:
+ printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_INIT_HIGH:
+ printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_DONE:
+ printf ("(Timeout: DONE not high after programming FPGA)\n ");
+ break;
+ }
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i = 0; i < 4; i++) {
+ len = fpgadata[index];
+ printf ("FPGA: %s\n", &(fpgadata[index + 1]));
+ index += len + 3;
+ }
+ putc ('\n');
+ /* delayed reboot */
+ for (i = 20; i > 0; i--) {
+ printf ("Rebooting in %2d seconds \r", i);
+ for (index = 0; index < 1000; index++)
+ udelay (1000);
+ }
+ putc ('\n');
+ do_reset (NULL, 0, 0, NULL);
+ }
+
+ /*
+ * Setup port pins for normal operation
+ */
+ out32 (IBM405GP_GPIO0_ODR, 0x00000000); /* no open drain pins */
+ out32 (IBM405GP_GPIO0_TCR, 0x07038100); /* setup for output */
+ out32 (IBM405GP_GPIO0_OR, 0x07030100); /* set output pins to high (default) */
+
+ /*
+ * IRQ 0-15 405GP internally generated; active high; level sensitive
+ * IRQ 16 405GP internally generated; active low; level sensitive
+ * IRQ 17-24 RESERVED
+ * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+ */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ int index;
+ int len;
+ unsigned char str[64];
+ int i = getenv_r ("serial#", str, sizeof (str));
+
+ puts ("Board: ");
+
+ if (!i || strncmp (str, "CANBT", 5)) {
+ puts ("### No HW ID - assuming CANBT\n");
+ return (0);
+ }
+
+ puts (str);
+
+ puts ("\nFPGA: ");
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i = 0; i < 4; i++) {
+ len = fpgadata[index];
+ printf ("%s ", &(fpgadata[index + 1]));
+ index += len + 3;
+ }
+
+ putc ('\n');
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ return (16 * 1024 * 1024);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+ /* TODO: XXX XXX XXX */
+ printf ("test: 16 MB - ok\n");
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
new file mode 100644
index 00000000000..184cda82362
--- /dev/null
+++ b/board/esd/du405/du405.c
@@ -0,0 +1,200 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "du405.h"
+#include <asm/processor.h>
+#include <ppc4xx.h>
+#include <405gp_i2c.h>
+#include <command.h>
+#include <cmd_boot.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+#if 0
+#define FPGA_DEBUG2
+#endif
+
+/* fpga configuration data - generated by bin2cc */
+const unsigned char fpgadata[] = {
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+int board_pre_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ int index, len, i;
+ int status;
+
+#ifdef FPGA_DEBUG
+ /* set up serial port with default baudrate */
+ (void) get_clocks ();
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init ();
+ console_init_f ();
+#endif
+
+ /*
+ * Boot onboard FPGA
+ */
+ status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
+ if (status != 0) {
+ /* booting FPGA failed */
+#ifndef FPGA_DEBUG
+ /* set up serial port with default baudrate */
+ (void) get_clocks ();
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init ();
+ console_init_f ();
+#endif
+ printf ("\nFPGA: Booting failed ");
+ switch (status) {
+ case ERROR_FPGA_PRG_INIT_LOW:
+ printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_INIT_HIGH:
+ printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_DONE:
+ printf ("(Timeout: DONE not high after programming FPGA)\n ");
+ break;
+ }
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i = 0; i < 4; i++) {
+ len = fpgadata[index];
+ printf ("FPGA: %s\n", &(fpgadata[index + 1]));
+ index += len + 3;
+ }
+ putc ('\n');
+ /* delayed reboot */
+ for (i = 20; i > 0; i--) {
+ printf ("Rebooting in %2d seconds \r", i);
+ for (index = 0; index < 1000; index++)
+ udelay (1000);
+ }
+ putc ('\n');
+ do_reset (NULL, 0, 0, NULL);
+ }
+
+ /*
+ * IRQ 0-15 405GP internally generated; active high; level sensitive
+ * IRQ 16 405GP internally generated; active low; level sensitive
+ * IRQ 17-24 RESERVED
+ * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) DUART_A; active high; level sensitive
+ * IRQ 27 (EXT IRQ 2) DUART_B; active high; level sensitive
+ * IRQ 28 (EXT IRQ 3) unused; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) unused; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) unused; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+ */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr (uicpr, 0xFFFFFFB1); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /*
+ * EBC Configuration Register: set ready timeout to 100 us
+ */
+ mtebc (epcr, 0xb8400000);
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ int index;
+ int len;
+ unsigned char str[64];
+ int i = getenv_r ("serial#", str, sizeof (str));
+
+ puts ("Board: ");
+
+ if (i == -1) {
+ puts ("### No HW ID - assuming DU405");
+ } else {
+ puts (str);
+ }
+
+ puts ("\nFPGA: ");
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i = 0; i < 4; i++) {
+ len = fpgadata[index];
+ printf ("%s ", &(fpgadata[index + 1]));
+ index += len + 3;
+ }
+
+ putc ('\n');
+
+ /*
+ * Reset external DUART via FPGA
+ */
+ *(volatile unsigned char *) FPGA_MODE_REG = 0xff; /* reset high active */
+ *(volatile unsigned char *) FPGA_MODE_REG = 0x00; /* low again */
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ return (16 * 1024 * 1024);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+ /* TODO: XXX XXX XXX */
+ printf ("test: 16 MB - ok\n");
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 09:16:25 +0000