aboutsummaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c2
-rw-r--r--cpu/ppc4xx/4xx_enet.c10
-rw-r--r--cpu/ppc4xx/Makefile4
-rw-r--r--cpu/ppc4xx/bedbug_405.c2
-rw-r--r--cpu/ppc4xx/dcr.S4
-rw-r--r--cpu/ppc4xx/gpio.c2
-rw-r--r--cpu/ppc4xx/interrupts.c4
-rw-r--r--cpu/ppc4xx/kgdb.S4
-rw-r--r--cpu/ppc4xx/ndfc.c2
-rw-r--r--cpu/ppc4xx/sdram.c32
-rw-r--r--cpu/ppc4xx/sdram.h2
-rw-r--r--cpu/ppc4xx/serial.c13
-rw-r--r--cpu/ppc4xx/speed.c33
-rw-r--r--cpu/ppc4xx/start.S61
-rw-r--r--[-rwxr-xr-x]cpu/ppc4xx/traps.c14
-rw-r--r--cpu/ppc4xx/usb.c50
-rw-r--r--cpu/ppc4xx/usbdev.c2
17 files changed, 166 insertions, 75 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 18b90ba5ac6..67ba5bdef24 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -621,7 +621,6 @@ static void get_spd_info(unsigned long *dimm_populated,
}
}
-#ifdef CONFIG_ADD_RAM_INFO
void board_add_ram_info(int use_default)
{
PPC440_SYS_INFO board_cfg;
@@ -642,7 +641,6 @@ void board_add_ram_info(int use_default)
val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
printf(", CL%d)", val);
}
-#endif
/*------------------------------------------------------------------
* For the memory DIMMs installed, this routine verifies that they
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index b90363f47ab..cc8e7346dac 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -94,9 +94,9 @@
* network support enabled.
* Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
*/
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
+#if defined(CONFIG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
-#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
#error "CONFIG_MII has to be defined!"
#endif
@@ -1685,7 +1685,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
#endif
#if defined(CONFIG_NET_MULTI)
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_register (dev->name,
emac4xx_miiphy_read, emac4xx_miiphy_write);
#endif
@@ -1726,7 +1726,7 @@ int eth_rx(void)
int emac4xx_miiphy_initialize (bd_t * bis)
{
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_register ("ppc_4xx_eth0",
emac4xx_miiphy_read, emac4xx_miiphy_write);
#endif
@@ -1735,4 +1735,4 @@ int emac4xx_miiphy_initialize (bd_t * bis)
}
#endif /* !defined(CONFIG_NET_MULTI) */
-#endif /* #if (CONFIG_COMMANDS & CFG_CMD_NET) */
+#endif
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 4068b53208f..af9da5b95fd 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -27,12 +27,12 @@ LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o kgdb.o
SOBJS = dcr.o
-COBJS = 405gp_pci.o 4xx_enet.o \
+COBJS = 405gp_pci.o 440spe_pcie.o 4xx_enet.o \
bedbug_405.o commproc.o \
cpu.o cpu_init.o gpio.o i2c.o interrupts.o \
miiphy.o ndfc.o sdram.o serial.o \
40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \
- tlb.o traps.o usb_ohci.o usbdev.o \
+ tlb.o traps.o usb_ohci.o usb.o usbdev.o \
440spe_pcie.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/ppc4xx/bedbug_405.c b/cpu/ppc4xx/bedbug_405.c
index a3c2119764c..5ef5607918d 100644
--- a/cpu/ppc4xx/bedbug_405.c
+++ b/cpu/ppc4xx/bedbug_405.c
@@ -10,7 +10,7 @@
#include <bedbug/regs.h>
#include <bedbug/ppc.h>
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) && defined(CONFIG_4xx)
+#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_4xx)
#define MAX_BREAK_POINTS 4
diff --git a/cpu/ppc4xx/dcr.S b/cpu/ppc4xx/dcr.S
index 7102364ebdf..93465a3b513 100644
--- a/cpu/ppc4xx/dcr.S
+++ b/cpu/ppc4xx/dcr.S
@@ -22,7 +22,7 @@
*/
#include <config.h>
-#if defined(CONFIG_4xx) && defined(CFG_CMD_SETGETDCR)
+#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
#include <ppc4xx.h>
@@ -195,4 +195,4 @@ set_dcr:
blr /* Return to calling function */
.Lfe4: .size set_dcr,.Lfe4-set_dcr
/* end set_dcr() */
-#endif /* CONFIG_4xx & CFG_CMD_SETGETDCR */
+#endif
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
index 0d0e273fc42..50f2fdf1139 100644
--- a/cpu/ppc4xx/gpio.c
+++ b/cpu/ppc4xx/gpio.c
@@ -186,6 +186,7 @@ void gpio_set_chip_configuration(void)
out32(GPIO0_TCR, reg);
}
+#ifdef GPIO1
if (gpio_core == GPIO1) {
/*
* Setup output value
@@ -203,6 +204,7 @@ void gpio_set_chip_configuration(void)
reg = in32(GPIO1_TCR) | (0x80000000 >> (i));
out32(GPIO1_TCR, reg);
}
+#endif /* GPIO1 */
reg = in32(GPIO_OS(core_add+offs))
& ~(GPIO_MASK >> (j*2));
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index c5a9f02566a..ca565cc3e07 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -628,7 +628,7 @@ void timer_interrupt_cpu (struct pt_regs *regs)
/****************************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+#if defined(CONFIG_CMD_IRQ)
/*******************************************************************************
*
@@ -698,4 +698,4 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
-#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */
+#endif
diff --git a/cpu/ppc4xx/kgdb.S b/cpu/ppc4xx/kgdb.S
index be283403e92..8c4bbf2e4de 100644
--- a/cpu/ppc4xx/kgdb.S
+++ b/cpu/ppc4xx/kgdb.S
@@ -34,7 +34,7 @@
#include <asm/cache.h>
#include <asm/mmu.h>
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
/*
* cache flushing routines for kgdb
*/
@@ -75,4 +75,4 @@ kgdb_flush_cache_range:
SYNC
blr
-#endif /* CFG_CMD_KGDB */
+#endif
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index f63fc79f6cb..398457726f4 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -31,7 +31,7 @@
#include <common.h>
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
+#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
(defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_405EZ))
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index d520cd3ff4c..2724d91f0f1 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -187,14 +187,14 @@ void sdram_init(void)
/*
* Disable memory controller.
*/
- mtsdram0(mem_mcopt1, 0x00000000);
+ mtsdram(mem_mcopt1, 0x00000000);
/*
* Set MB0CF for bank 0.
*/
- mtsdram0(mem_mb0cf, mb0cf[i].reg);
- mtsdram0(mem_sdtr1, sdtr1);
- mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
+ mtsdram(mem_mb0cf, mb0cf[i].reg);
+ mtsdram(mem_sdtr1, sdtr1);
+ mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
udelay(200);
@@ -203,14 +203,34 @@ void sdram_init(void)
* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
* read/prefetch.
*/
- mtsdram0(mem_mcopt1, 0x80800000);
+ mtsdram(mem_mcopt1, 0x80800000);
udelay(10000);
if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
/*
- * OK, size detected -> all done
+ * OK, size detected. Enable second bank if
+ * defined (assumes same type as bank 0)
*/
+#ifdef CONFIG_SDRAM_BANK1
+ u32 b1cr = mb0cf[i].size | mb0cf[i].reg;
+
+ mtsdram(mem_mcopt1, 0x00000000);
+ mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
+ mtsdram(mem_mcopt1, 0x80800000);
+ udelay(10000);
+
+ /*
+ * Check if 2nd bank is really available.
+ * If the size not equal to the size of the first
+ * bank, then disable the 2nd bank completely.
+ */
+ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+ mb0cf[i].size) {
+ mtsdram(mem_mb1cf, 0);
+ mtsdram(mem_mcopt1, 0);
+ }
+#endif
return;
}
}
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
index 62b5442f3ba..4fb9b1ae14e 100644
--- a/cpu/ppc4xx/sdram.h
+++ b/cpu/ppc4xx/sdram.h
@@ -29,8 +29,6 @@
#include <config.h>
-#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-
#define ONE_BILLION 1000000000
struct sdram_conf_s {
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index e62dd9dac51..60712b151e2 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -448,12 +448,17 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
unsigned long i;
unsigned long est; /* current estimate */
unsigned long plloutb;
+ unsigned long cpr_pllc;
u32 reg;
+ /* check the pll feedback source */
+ mfcpr(cprpllc, cpr_pllc);
+
get_sys_info(&sysinfo);
- plloutb = ((CONFIG_SYS_CLK_FREQ * sysinfo.pllFwdDiv * sysinfo.pllFbkDiv)
- / sysinfo.pllFwdDivB);
+ plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
+ sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) * sysinfo.pllFbkDiv) /
+ sysinfo.pllFwdDivB);
udiv = 256; /* Assume lowest possible serial clk */
div = plloutb / (16 * baudrate); /* total divisor */
umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */
@@ -843,7 +848,7 @@ int serial_buffered_tstc (void)
#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
/*
AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
number 0 or number 1
@@ -949,7 +954,7 @@ void kgdb_interruptible (int yes)
return;
}
#endif /* (CONFIG_KGDB_SER_INDEX & 2) */
-#endif /* CFG_CMD_KGDB */
+#endif
#if defined(CONFIG_SERIAL_MULTI)
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 028b11af892..da5330a3604 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -771,6 +771,7 @@ ulong get_PCI_freq (void)
void get_sys_info (PPC405_SYS_INFO * sysInfo)
{
unsigned long cpr_plld;
+ unsigned long cpr_pllc;
unsigned long cpr_primad;
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
unsigned long primad_cpudv;
@@ -780,6 +781,7 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
* Read PLL Mode registers
*/
mfcpr(cprplld, cpr_plld);
+ mfcpr(cprpllc, cpr_pllc);
/*
* Determine forward divider A
@@ -787,20 +789,18 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
/*
- * Determine forward divider B (should be equal to A)
+ * Determine forward divider B
*/
sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
- if (sysInfo->pllFwdDivB == 0) {
+ if (sysInfo->pllFwdDivB == 0)
sysInfo->pllFwdDivB = 8;
- }
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
- if (sysInfo->pllFbkDiv == 0) {
+ if (sysInfo->pllFbkDiv == 0)
sysInfo->pllFbkDiv = 256;
- }
/*
* Read CPR_PRIMAD register
@@ -810,30 +810,30 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
* Determine PLB_DIV.
*/
sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
- if (sysInfo->pllPlbDiv == 0) {
+ if (sysInfo->pllPlbDiv == 0)
sysInfo->pllPlbDiv = 16;
- }
/*
* Determine EXTBUS_DIV.
*/
sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
- if (sysInfo->pllExtBusDiv == 0) {
+ if (sysInfo->pllExtBusDiv == 0)
sysInfo->pllExtBusDiv = 16;
- }
/*
* Determine OPB_DIV.
*/
sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
- if (sysInfo->pllOpbDiv == 0) {
+ if (sysInfo->pllOpbDiv == 0)
sysInfo->pllOpbDiv = 16;
- }
/*
* Determine the M factor
*/
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+ if (cpr_pllc & PLLC_SRC_MASK)
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+ else
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
/*
* Determine VCO clock frequency
@@ -845,16 +845,17 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
* Determine CPU clock frequency
*/
primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
- if (primad_cpudv == 0) {
+ if (primad_cpudv == 0)
primad_cpudv = 16;
- }
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / primad_cpudv;
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / primad_cpudv;
/*
* Determine PLB clock frequency
*/
- sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllPlbDiv;
+ sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
}
/********************************************
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 8ecaaea4d9a..9626b65c885 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1870,28 +1870,6 @@ ppc405ep_init:
mtdcr ebccfgd,r3
#endif
-#ifndef CFG_CPC0_PCI
- li r3,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA
- /*
- !-----------------------------------------------------------------------
- ! Check FPGA for PCI internal/external arbitration
- ! If board is set to internal arbitration, update cpc0_pci
- !-----------------------------------------------------------------------
- */
- addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */
- ori r5,r5,FPGA_REG1@l
- lbz r5,0x0(r5) /* read to get PCI arb selection */
- andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/
- beq ..pci_cfg_set /* if not set, then bypass reg write*/
-#endif
- ori r3,r3,CPC0_PCI_ARBIT_EN
-#else /* CFG_CPC0_PCI */
- li r3,CFG_CPC0_PCI
-#endif /* CFG_CPC0_PCI */
-..pci_cfg_set:
- mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/
-
/*
!-----------------------------------------------------------------------
! Check to see if chip is in bypass mode.
@@ -1947,11 +1925,50 @@ ppc405ep_init:
..no_pllset:
#endif /* CONFIG_BUBINGA */
+#ifdef CONFIG_TAIHU
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ addis r5,0,CPLD_REG0_ADDR@h
+ ori r5,r5,CPLD_REG0_ADDR@l
+ andi. r5, r5, 0x10
+ bne _pci_66mhz
+#endif /* CONFIG_TAIHU */
+
+#if defined(CONFIG_ZEUS)
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ lis r3,0x0000
+ addi r3,r3,0x3030
+ lis r4,0x8042
+ addi r4,r4,0x223e
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+ b 1f
+#endif
+
addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
ori r3,r3,PLLMR0_DEFAULT@l /* */
addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
ori r4,r4,PLLMR1_DEFAULT@l /* */
+#ifdef CONFIG_TAIHU
+ b 1f
+_pci_66mhz:
+ addis r3,0,PLLMR0_DEFAULT_PCI66@h
+ ori r3,r3,PLLMR0_DEFAULT_PCI66@l
+ addis r4,0,PLLMR1_DEFAULT_PCI66@h
+ ori r4,r4,PLLMR1_DEFAULT_PCI66@l
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+#endif /* CONFIG_TAIHU */
+
+1:
b pll_write /* Write the CPC0_PLLMR with new value */
pll_done:
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
index de5fde9e29f..f5365cb76a6 100755..100644
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
@@ -38,7 +38,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
int (*debugger_exception_handler)(struct pt_regs *) = 0;
#endif
@@ -78,7 +78,7 @@ static __inline__ unsigned long get_esr(void)
#define ESR_DIZ 0x00400000
#define ESR_U0F 0x00008000
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
@@ -165,7 +165,7 @@ MachineCheckException(struct pt_regs *regs)
return;
}
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
@@ -312,7 +312,7 @@ MachineCheckException(struct pt_regs *regs)
void
AlignmentException(struct pt_regs *regs)
{
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
@@ -327,7 +327,7 @@ ProgramCheckException(struct pt_regs *regs)
{
long esr_val;
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
@@ -364,7 +364,7 @@ DecrementerPITException(struct pt_regs *regs)
void
UnknownException(struct pt_regs *regs)
{
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
@@ -379,7 +379,7 @@ DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
show_regs(regs);
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
do_bedbug_breakpoint( regs );
#endif
}
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
new file mode 100644
index 00000000000..272ed8c15e4
--- /dev/null
+++ b/cpu/ppc4xx/usb.c
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+
+#include "usbdev.h"
+
+int usb_cpu_init(void)
+{
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+ usb_dev_init();
+#endif
+
+ return 0;
+}
+
+int usb_cpu_stop(void)
+{
+ return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+ return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 6140d2a9089..5924a6cb847 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -3,7 +3,7 @@
#include <common.h>
#include <asm/processor.h>
-#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && (CONFIG_COMMANDS & CFG_CMD_USB)
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
#include <usb.h>
#include "usbdev.h"
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 15:35:08 +0000