diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.davinci | 2 | ||||
| -rw-r--r-- | doc/README.fec_mxc | 2 | ||||
| -rw-r--r-- | doc/README.socfpga | 10 | ||||
| -rw-r--r-- | doc/develop/environment.rst | 2 | ||||
| -rw-r--r-- | doc/usage/netconsole.rst | 2 |
5 files changed, 4 insertions, 14 deletions
diff --git a/doc/README.davinci b/doc/README.davinci index 326efa0a2d6..f368f99a41e 100644 --- a/doc/README.davinci +++ b/doc/README.davinci @@ -58,7 +58,7 @@ Please make sure you understand the restrictions placed on this clock in the device specific datasheet before setting up this variable. This information is passed to the Linux kernel using the ATAG_REVISION atag. -If "maxcpuclk" is not defined, the configuration CONFIG_DA850_EVM_MAX_CPU_CLK +If "maxcpuclk" is not defined, the configuration CFG_DA850_EVM_MAX_CPU_CLK is used to obtain this information. Links diff --git a/doc/README.fec_mxc b/doc/README.fec_mxc index 2ccd4288d28..a33f4a75742 100644 --- a/doc/README.fec_mxc +++ b/doc/README.fec_mxc @@ -7,7 +7,7 @@ CONFIG_FEC_MXC CONFIG_MII Must be defined if CONFIG_FEC_MXC is defined. -CONFIG_FEC_MXC_SWAP_PACKET +CFG_FEC_MXC_SWAP_PACKET Forced on iff MX28. Swaps the bytes order of all words(4 byte units) in the packet. This should not be specified by a board file. It is cpu specific. diff --git a/doc/README.socfpga b/doc/README.socfpga index 4d73398eb97..e5adb62102b 100644 --- a/doc/README.socfpga +++ b/doc/README.socfpga @@ -6,16 +6,6 @@ This README is about U-Boot and SPL support for Altera's ARM Cortex-A9MPCore based SOCFPGA. To know more about the hardware itself, please refer to www.altera.com. - -socfpga_dw_mmc --------------- - -Here are macro and detailed configuration required to enable DesignWare SDMMC -controller support within SOCFPGA - -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 --> Using smaller max blk cnt to avoid flooding the limited stack in OCRAM - --------------------------------------------------------------------- Cyclone 5 / Arria 5 generating the handoff header files for U-Boot SPL --------------------------------------------------------------------- diff --git a/doc/develop/environment.rst b/doc/develop/environment.rst index 0b86fafbff7..e1783462bb0 100644 --- a/doc/develop/environment.rst +++ b/doc/develop/environment.rst @@ -18,7 +18,7 @@ The callbacks are named and associated with a function using the U_BOOT_ENV_CALLBACK macro in your board or driver code. These callbacks are associated with variables in one of two ways. The -static list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC +static list can be added to by defining CFG_ENV_CALLBACK_LIST_STATIC in the board configuration to a string that defines a list of associations. The list must be in the following format:: diff --git a/doc/usage/netconsole.rst b/doc/usage/netconsole.rst index 0156f0212d9..2aa3b9ccc59 100644 --- a/doc/usage/netconsole.rst +++ b/doc/usage/netconsole.rst @@ -9,7 +9,7 @@ set either of these variables to "nc". Input and output can be switched independently. The default buffer size can be overridden by setting -CONFIG_NETCONSOLE_BUFFER_SIZE. +CFG_NETCONSOLE_BUFFER_SIZE. We use an environment variable 'ncip' to set the IP address and the port of the destination. The format is <ip_addr>:<port>. If <port> is |