aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk/clk_stm32f.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clk/clk_stm32f.c')
-rw-r--r--drivers/clk/clk_stm32f.c353
1 files changed, 353 insertions, 0 deletions
diff --git a/drivers/clk/clk_stm32f.c b/drivers/clk/clk_stm32f.c
new file mode 100644
index 00000000000..10f44859cda
--- /dev/null
+++ b/drivers/clk/clk_stm32f.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+
+#include <asm/io.h>
+#include <asm/arch/rcc.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/stm32_periph.h>
+#include <asm/arch/stm32_pwr.h>
+
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
+#define RCC_CR_HSION BIT(0)
+#define RCC_CR_HSEON BIT(16)
+#define RCC_CR_HSERDY BIT(17)
+#define RCC_CR_HSEBYP BIT(18)
+#define RCC_CR_CSSON BIT(19)
+#define RCC_CR_PLLON BIT(24)
+#define RCC_CR_PLLRDY BIT(25)
+
+#define RCC_PLLCFGR_PLLM_MASK GENMASK(5, 0)
+#define RCC_PLLCFGR_PLLN_MASK GENMASK(14, 6)
+#define RCC_PLLCFGR_PLLP_MASK GENMASK(17, 16)
+#define RCC_PLLCFGR_PLLQ_MASK GENMASK(27, 24)
+#define RCC_PLLCFGR_PLLSRC BIT(22)
+#define RCC_PLLCFGR_PLLM_SHIFT 0
+#define RCC_PLLCFGR_PLLN_SHIFT 6
+#define RCC_PLLCFGR_PLLP_SHIFT 16
+#define RCC_PLLCFGR_PLLQ_SHIFT 24
+
+#define RCC_CFGR_AHB_PSC_MASK GENMASK(7, 4)
+#define RCC_CFGR_APB1_PSC_MASK GENMASK(12, 10)
+#define RCC_CFGR_APB2_PSC_MASK GENMASK(15, 13)
+#define RCC_CFGR_SW0 BIT(0)
+#define RCC_CFGR_SW1 BIT(1)
+#define RCC_CFGR_SW_MASK GENMASK(1, 0)
+#define RCC_CFGR_SW_HSI 0
+#define RCC_CFGR_SW_HSE RCC_CFGR_SW0
+#define RCC_CFGR_SW_PLL RCC_CFGR_SW1
+#define RCC_CFGR_SWS0 BIT(2)
+#define RCC_CFGR_SWS1 BIT(3)
+#define RCC_CFGR_SWS_MASK GENMASK(3, 2)
+#define RCC_CFGR_SWS_HSI 0
+#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0
+#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1
+#define RCC_CFGR_HPRE_SHIFT 4
+#define RCC_CFGR_PPRE1_SHIFT 10
+#define RCC_CFGR_PPRE2_SHIFT 13
+
+
+struct pll_psc {
+ u8 pll_m;
+ u16 pll_n;
+ u8 pll_p;
+ u8 pll_q;
+ u8 ahb_psc;
+ u8 apb1_psc;
+ u8 apb2_psc;
+};
+
+#define AHB_PSC_1 0
+#define AHB_PSC_2 0x8
+#define AHB_PSC_4 0x9
+#define AHB_PSC_8 0xA
+#define AHB_PSC_16 0xB
+#define AHB_PSC_64 0xC
+#define AHB_PSC_128 0xD
+#define AHB_PSC_256 0xE
+#define AHB_PSC_512 0xF
+
+#define APB_PSC_1 0
+#define APB_PSC_2 0x4
+#define APB_PSC_4 0x5
+#define APB_PSC_8 0x6
+#define APB_PSC_16 0x7
+
+struct stm32_clk_info {
+ struct pll_psc sys_pll_psc;
+ bool has_overdrive;
+};
+
+struct stm32_clk_info stm32f4_clk_info = {
+ /* 180 MHz */
+ .sys_pll_psc = {
+ .pll_m = 8,
+ .pll_n = 360,
+ .pll_p = 2,
+ .pll_q = 8,
+ .ahb_psc = AHB_PSC_1,
+ .apb1_psc = APB_PSC_4,
+ .apb2_psc = APB_PSC_2,
+ },
+ .has_overdrive = false,
+};
+
+struct stm32_clk_info stm32f7_clk_info = {
+ /* 200 MHz */
+ .sys_pll_psc = {
+ .pll_m = 25,
+ .pll_n = 400,
+ .pll_p = 2,
+ .pll_q = 8,
+ .ahb_psc = AHB_PSC_1,
+ .apb1_psc = APB_PSC_4,
+ .apb2_psc = APB_PSC_2,
+ },
+ .has_overdrive = true,
+};
+
+struct stm32_clk {
+ struct stm32_rcc_regs *base;
+ struct stm32_pwr_regs *pwr_regs;
+ struct stm32_clk_info *info;
+};
+
+static int configure_clocks(struct udevice *dev)
+{
+ struct stm32_clk *priv = dev_get_priv(dev);
+ struct stm32_rcc_regs *regs = priv->base;
+ struct stm32_pwr_regs *pwr = priv->pwr_regs;
+ struct pll_psc sys_pll_psc = priv->info->sys_pll_psc;
+
+ /* Reset RCC configuration */
+ setbits_le32(&regs->cr, RCC_CR_HSION);
+ writel(0, &regs->cfgr); /* Reset CFGR */
+ clrbits_le32(&regs->cr, (RCC_CR_HSEON | RCC_CR_CSSON
+ | RCC_CR_PLLON));
+ writel(0x24003010, &regs->pllcfgr); /* Reset value from RM */
+ clrbits_le32(&regs->cr, RCC_CR_HSEBYP);
+ writel(0, &regs->cir); /* Disable all interrupts */
+
+ /* Configure for HSE+PLL operation */
+ setbits_le32(&regs->cr, RCC_CR_HSEON);
+ while (!(readl(&regs->cr) & RCC_CR_HSERDY))
+ ;
+
+ setbits_le32(&regs->cfgr, ((
+ sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
+ | (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
+ | (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
+
+ /* Configure the main PLL */
+ setbits_le32(&regs->pllcfgr, RCC_PLLCFGR_PLLSRC); /* pll source HSE */
+ clrsetbits_le32(&regs->pllcfgr, RCC_PLLCFGR_PLLM_MASK,
+ sys_pll_psc.pll_m << RCC_PLLCFGR_PLLM_SHIFT);
+ clrsetbits_le32(&regs->pllcfgr, RCC_PLLCFGR_PLLN_MASK,
+ sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT);
+ clrsetbits_le32(&regs->pllcfgr, RCC_PLLCFGR_PLLP_MASK,
+ ((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT);
+ clrsetbits_le32(&regs->pllcfgr, RCC_PLLCFGR_PLLQ_MASK,
+ sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT);
+
+ /* Enable the main PLL */
+ setbits_le32(&regs->cr, RCC_CR_PLLON);
+ while (!(readl(&regs->cr) & RCC_CR_PLLRDY))
+ ;
+
+ setbits_le32(&regs->apb1enr, RCC_APB1ENR_PWREN);
+
+ if (priv->info->has_overdrive) {
+ /*
+ * Enable high performance mode
+ * System frequency up to 200 MHz
+ */
+ setbits_le32(&pwr->cr1, PWR_CR1_ODEN);
+ /* Infinite wait! */
+ while (!(readl(&pwr->csr1) & PWR_CSR1_ODRDY))
+ ;
+ /* Enable the Over-drive switch */
+ setbits_le32(&pwr->cr1, PWR_CR1_ODSWEN);
+ /* Infinite wait! */
+ while (!(readl(&pwr->csr1) & PWR_CSR1_ODSWRDY))
+ ;
+ }
+
+ stm32_flash_latency_cfg(5);
+ clrbits_le32(&regs->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
+ setbits_le32(&regs->cfgr, RCC_CFGR_SW_PLL);
+
+ while ((readl(&regs->cfgr) & RCC_CFGR_SWS_MASK) !=
+ RCC_CFGR_SWS_PLL)
+ ;
+
+ return 0;
+}
+
+static unsigned long stm32_clk_get_rate(struct clk *clk)
+{
+ struct stm32_clk *priv = dev_get_priv(clk->dev);
+ struct stm32_rcc_regs *regs = priv->base;
+ u32 sysclk = 0;
+ u32 shift = 0;
+ u16 pllm, plln, pllp;
+ /* Prescaler table lookups for clock computation */
+ u8 ahb_psc_table[16] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
+ };
+ u8 apb_psc_table[8] = {
+ 0, 0, 0, 0, 1, 2, 3, 4
+ };
+
+ if ((readl(&regs->cfgr) & RCC_CFGR_SWS_MASK) ==
+ RCC_CFGR_SWS_PLL) {
+ pllm = (readl(&regs->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
+ plln = ((readl(&regs->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
+ >> RCC_PLLCFGR_PLLN_SHIFT);
+ pllp = ((((readl(&regs->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
+ >> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1);
+ sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp;
+ } else {
+ return -EINVAL;
+ }
+
+ switch (clk->id) {
+ /*
+ * AHB CLOCK: 3 x 32 bits consecutive registers are used :
+ * AHB1, AHB2 and AHB3
+ */
+ case STM32F7_AHB1_CLOCK(GPIOA) ... STM32F7_AHB3_CLOCK(QSPI):
+ shift = ahb_psc_table[(
+ (readl(&regs->cfgr) & RCC_CFGR_AHB_PSC_MASK)
+ >> RCC_CFGR_HPRE_SHIFT)];
+ return sysclk >>= shift;
+ /* APB1 CLOCK */
+ case STM32F7_APB1_CLOCK(TIM2) ... STM32F7_APB1_CLOCK(UART8):
+ shift = apb_psc_table[(
+ (readl(&regs->cfgr) & RCC_CFGR_APB1_PSC_MASK)
+ >> RCC_CFGR_PPRE1_SHIFT)];
+ return sysclk >>= shift;
+ /* APB2 CLOCK */
+ case STM32F7_APB2_CLOCK(TIM1) ... STM32F7_APB2_CLOCK(LTDC):
+ shift = apb_psc_table[(
+ (readl(&regs->cfgr) & RCC_CFGR_APB2_PSC_MASK)
+ >> RCC_CFGR_PPRE2_SHIFT)];
+ return sysclk >>= shift;
+ default:
+ pr_err("clock index %ld out of range\n", clk->id);
+ return -EINVAL;
+ }
+}
+
+static int stm32_clk_enable(struct clk *clk)
+{
+ struct stm32_clk *priv = dev_get_priv(clk->dev);
+ struct stm32_rcc_regs *regs = priv->base;
+ u32 offset = clk->id / 32;
+ u32 bit_index = clk->id % 32;
+
+ debug("%s: clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n",
+ __func__, clk->id, offset, bit_index);
+ setbits_le32(&regs->ahb1enr + offset, BIT(bit_index));
+
+ return 0;
+}
+
+void clock_setup(int peripheral)
+{
+ switch (peripheral) {
+ case SYSCFG_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->apb2enr, RCC_APB2ENR_SYSCFGEN);
+ break;
+ case TIMER2_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN);
+ break;
+ case STMMAC_CLOCK_CFG:
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_EN);
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_RX_EN);
+ setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_TX_EN);
+ break;
+ default:
+ break;
+ }
+}
+
+static int stm32_clk_probe(struct udevice *dev)
+{
+ struct ofnode_phandle_args args;
+ int err;
+
+ debug("%s\n", __func__);
+
+ struct stm32_clk *priv = dev_get_priv(dev);
+ fdt_addr_t addr;
+
+ addr = dev_read_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->base = (struct stm32_rcc_regs *)addr;
+ priv->info = (struct stm32_clk_info *)dev_get_driver_data(dev);
+
+ if (priv->info->has_overdrive) {
+ err = dev_read_phandle_with_args(dev, "st,syscfg", NULL, 0, 0,
+ &args);
+ if (err) {
+ debug("%s: can't find syscon device (%d)\n", __func__,
+ err);
+ return err;
+ }
+
+ priv->pwr_regs = (struct stm32_pwr_regs *)ofnode_get_addr(args.node);
+ }
+
+ configure_clocks(dev);
+
+ return 0;
+}
+
+static int stm32_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
+{
+ debug("%s(clk=%p)\n", __func__, clk);
+
+ if (args->args_count != 2) {
+ debug("Invaild args_count: %d\n", args->args_count);
+ return -EINVAL;
+ }
+
+ if (args->args_count)
+ clk->id = args->args[1];
+ else
+ clk->id = 0;
+
+ return 0;
+}
+
+static struct clk_ops stm32_clk_ops = {
+ .of_xlate = stm32_clk_of_xlate,
+ .enable = stm32_clk_enable,
+ .get_rate = stm32_clk_get_rate,
+};
+
+static const struct udevice_id stm32_clk_ids[] = {
+ { .compatible = "st,stm32f42xx-rcc", .data = (ulong)&stm32f4_clk_info},
+ { .compatible = "st,stm32f746-rcc", .data = (ulong)&stm32f7_clk_info},
+ {}
+};
+
+U_BOOT_DRIVER(stm32fx_clk) = {
+ .name = "stm32fx_clk",
+ .id = UCLASS_CLK,
+ .of_match = stm32_clk_ids,
+ .ops = &stm32_clk_ops,
+ .probe = stm32_clk_probe,
+ .priv_auto_alloc_size = sizeof(struct stm32_clk),
+ .flags = DM_FLAG_PRE_RELOC,
+};