diff options
Diffstat (limited to 'drivers/ddr')
| -rw-r--r-- | drivers/ddr/fsl/Makefile | 19 | ||||
| -rw-r--r-- | drivers/ddr/fsl/ctrl_regs.c | 743 | ||||
| -rw-r--r-- | drivers/ddr/fsl/ddr4_dimm_params.c | 300 | ||||
| -rw-r--r-- | drivers/ddr/fsl/fsl_ddr_gen4.c | 234 | ||||
| -rw-r--r-- | drivers/ddr/fsl/interactive.c | 391 | ||||
| -rw-r--r-- | drivers/ddr/fsl/lc_common_dimm_params.c | 407 | ||||
| -rw-r--r-- | drivers/ddr/fsl/main.c | 31 | ||||
| -rw-r--r-- | drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 52 | ||||
| -rw-r--r-- | drivers/ddr/fsl/options.c | 142 | ||||
| -rw-r--r-- | drivers/ddr/fsl/util.c | 26 |
10 files changed, 2016 insertions, 329 deletions
diff --git a/drivers/ddr/fsl/Makefile b/drivers/ddr/fsl/Makefile index 265204f3119..df66c07230f 100644 --- a/drivers/ddr/fsl/Makefile +++ b/drivers/ddr/fsl/Makefile @@ -1,19 +1,20 @@ # -# Copyright 2008-2011 Freescale Semiconductor, Inc. +# Copyright 2008-2014 Freescale Semiconductor, Inc. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # Version 2 as published by the Free Software Foundation. # -obj-$(CONFIG_SYS_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR4) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o -obj-$(CONFIG_SYS_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o - -obj-$(CONFIG_SYS_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o ifdef CONFIG_DDR_SPD SPD := y endif @@ -24,6 +25,7 @@ ifdef SPD obj-$(CONFIG_SYS_FSL_DDR1) += ddr1_dimm_params.o obj-$(CONFIG_SYS_FSL_DDR2) += ddr2_dimm_params.o obj-$(CONFIG_SYS_FSL_DDR3) += ddr3_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR4) += ddr4_dimm_params.o endif obj-$(CONFIG_FSL_DDR_INTERACTIVE) += interactive.o @@ -32,3 +34,4 @@ obj-$(CONFIG_SYS_FSL_DDRC_GEN2) += mpc85xx_ddr_gen2.o obj-$(CONFIG_SYS_FSL_DDRC_GEN3) += mpc85xx_ddr_gen3.o obj-$(CONFIG_SYS_FSL_DDR_86XX) += mpc86xx_ddr.o obj-$(CONFIG_SYS_FSL_DDRC_ARM_GEN3) += arm_ddr_gen3.o +obj-$(CONFIG_SYS_FSL_DDRC_GEN4) += fsl_ddr_gen4.o diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index 0882932b070..78e82bba3d4 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Copyright 2008-2014 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -17,20 +17,6 @@ #include <fsl_immap.h> #include <asm/io.h> -#define _DDR_ADDR CONFIG_SYS_FSL_DDR_ADDR - -static u32 fsl_ddr_get_version(void) -{ - struct ccsr_ddr __iomem *ddr; - u32 ver_major_minor_errata; - - ddr = (void *)_DDR_ADDR; - ver_major_minor_errata = (ddr_in32(&ddr->ip_rev1) & 0xFFFF) << 8; - ver_major_minor_errata |= (ddr_in32(&ddr->ip_rev2) & 0xFF00) >> 8; - - return ver_major_minor_errata; -} - unsigned int picos_to_mclk(unsigned int picos); /* @@ -81,6 +67,39 @@ static inline int fsl_ddr_get_rtt(void) return rtt; } +#ifdef CONFIG_SYS_FSL_DDR4 +/* + * compute CAS write latency according to DDR4 spec + * CWL = 9 for <= 1600MT/s + * 10 for <= 1866MT/s + * 11 for <= 2133MT/s + * 12 for <= 2400MT/s + * 14 for <= 2667MT/s + * 16 for <= 2933MT/s + * 18 for higher + */ +static inline unsigned int compute_cas_write_latency(void) +{ + unsigned int cwl; + const unsigned int mclk_ps = get_memory_clk_period_ps(); + if (mclk_ps >= 1250) + cwl = 9; + else if (mclk_ps >= 1070) + cwl = 10; + else if (mclk_ps >= 935) + cwl = 11; + else if (mclk_ps >= 833) + cwl = 12; + else if (mclk_ps >= 750) + cwl = 14; + else if (mclk_ps >= 681) + cwl = 16; + else + cwl = 18; + + return cwl; +} +#else /* * compute the CAS write latency according to DDR3 spec * CWL = 5 if tCK >= 2.5ns @@ -119,6 +138,7 @@ static inline unsigned int compute_cas_write_latency(void) } return cwl; } +#endif /* Chip Select Configuration (CSn_CONFIG) */ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, @@ -135,6 +155,11 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */ unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */ int go_config = 0; +#ifdef CONFIG_SYS_FSL_DDR4 + unsigned int bg_bits_cs_n = 0; /* Num of bank group bits */ +#else + unsigned int n_banks_per_sdram_device; +#endif /* Compute CS_CONFIG only for existing ranks of each DIMM. */ switch (i) { @@ -178,14 +203,18 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, break; } if (go_config) { - unsigned int n_banks_per_sdram_device; cs_n_en = 1; ap_n_en = popts->cs_local_opts[i].auto_precharge; odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg; odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg; +#ifdef CONFIG_SYS_FSL_DDR4 + ba_bits_cs_n = dimm_params[dimm_number].bank_addr_bits; + bg_bits_cs_n = dimm_params[dimm_number].bank_group_bits; +#else n_banks_per_sdram_device = dimm_params[dimm_number].n_banks_per_sdram_device; ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2; +#endif row_bits_cs_n = dimm_params[dimm_number].n_row_addr - 12; col_bits_cs_n = dimm_params[dimm_number].n_col_addr - 8; } @@ -203,6 +232,9 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, | ((ba_bits_cs_n & 0x3) << 14) | ((row_bits_cs_n & 0x7) << 8) +#ifdef CONFIG_SYS_FSL_DDR4 + | ((bg_bits_cs_n & 0x3) << 4) +#endif | ((col_bits_cs_n & 0x7) << 0) ); debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config); @@ -262,11 +294,23 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, /* Precharge powerdown exit timing (tXP). */ unsigned char pre_pd_exit_mclk; /* ODT powerdown exit timing (tAXPD). */ - unsigned char taxpd_mclk; + unsigned char taxpd_mclk = 0; /* Mode register set cycle time (tMRD). */ unsigned char tmrd_mclk; -#ifdef CONFIG_SYS_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR4 + /* tXP=max(4nCK, 6ns) */ + int txp = max((get_memory_clk_period_ps() * 4), 6000); /* unit=ps */ + trwt_mclk = 2; + twrt_mclk = 1; + act_pd_exit_mclk = picos_to_mclk(txp); + pre_pd_exit_mclk = act_pd_exit_mclk; + /* + * MRS_CYC = max(tMRD, tMOD) + * tMRD = 8nCK, tMOD = max(24nCK, 15ns) + */ + tmrd_mclk = max(24, picos_to_mclk(15000)); +#elif defined(CONFIG_SYS_FSL_DDR3) /* * (tXARD and tXARDS). Empirical? * The DDR3 spec has not tXARD, @@ -275,7 +319,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, * spec has not the tAXPD, we use * tAXPD=1, need design to confirm. */ - int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ + int txp = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ unsigned int data_rate = get_ddr_freq(0); tmrd_mclk = 4; /* set the turnaround time */ @@ -300,7 +344,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, taxpd_mclk = 1; } else { /* act_pd_exit_mclk = tXARD, see above */ - act_pd_exit_mclk = picos_to_mclk(tXP); + act_pd_exit_mclk = picos_to_mclk(txp); /* Mode register MR0[A12] is '1' - fast exit */ pre_pd_exit_mclk = act_pd_exit_mclk; taxpd_mclk = 1; @@ -364,8 +408,12 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4; ext_caslat = (2 * cas_latency - 1) >> 4; ext_add_lat = additive_latency >> 4; +#ifdef CONFIG_SYS_FSL_DDR4 + ext_refrec = (picos_to_mclk(common_dimm->trfc1_ps) - 8) >> 4; +#else ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4; /* ext_wrrec only deals with 16 clock and above, or 14 with OTF */ +#endif ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) + (popts->otf_burst_chop_en ? 2 : 0)) >> 4; @@ -404,9 +452,19 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, unsigned char acttoact_mclk; /* Last write data pair to read command issue interval (tWTR) */ unsigned char wrtord_mclk; +#ifdef CONFIG_SYS_FSL_DDR4 + /* DDR4 supports 10, 12, 14, 16, 18, 20, 24 */ + static const u8 wrrec_table[] = { + 10, 10, 10, 10, 10, + 10, 10, 10, 10, 10, + 12, 12, 14, 14, 16, + 16, 18, 18, 20, 20, + 24, 24, 24, 24}; +#else /* DDR_SDRAM_MODE doesn't support 9,11,13,15 */ static const u8 wrrec_table[] = { 1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0}; +#endif pretoact_mclk = picos_to_mclk(common_dimm->trp_ps); acttopre_mclk = picos_to_mclk(common_dimm->tras_ps); @@ -438,20 +496,34 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, * we need set extend bit for it at * TIMING_CFG_3[EXT_CASLAT] */ - caslat_ctrl = 2 * cas_latency - 1; + if (fsl_ddr_get_version() <= 0x40400) + caslat_ctrl = 2 * cas_latency - 1; + else + caslat_ctrl = (cas_latency - 1) << 1; #endif +#ifdef CONFIG_SYS_FSL_DDR4 + refrec_ctrl = picos_to_mclk(common_dimm->trfc1_ps) - 8; + wrrec_mclk = picos_to_mclk(common_dimm->twr_ps); + acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4); + wrtord_mclk = max(2, picos_to_mclk(2500)); + if ((wrrec_mclk < 1) || (wrrec_mclk > 24)) + printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk); + else + wrrec_mclk = wrrec_table[wrrec_mclk - 1]; +#else refrec_ctrl = picos_to_mclk(common_dimm->trfc_ps) - 8; wrrec_mclk = picos_to_mclk(common_dimm->twr_ps); - - if (wrrec_mclk > 16) - printf("Error: WRREC doesn't support more than 16 clocks\n"); + acttoact_mclk = picos_to_mclk(common_dimm->trrd_ps); + wrtord_mclk = picos_to_mclk(common_dimm->twtr_ps); + if ((wrrec_mclk < 1) || (wrrec_mclk > 16)) + printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk); else wrrec_mclk = wrrec_table[wrrec_mclk - 1]; +#endif if (popts->otf_burst_chop_en) wrrec_mclk += 2; - acttoact_mclk = picos_to_mclk(common_dimm->trrd_ps); /* * JEDEC has min requirement for tRRD */ @@ -459,7 +531,6 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, if (acttoact_mclk < 4) acttoact_mclk = 4; #endif - wrtord_mclk = picos_to_mclk(common_dimm->twtr_ps); /* * JEDEC has some min requirements for tWTR */ @@ -526,14 +597,18 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, wr_lat = compute_cas_write_latency(); #endif +#ifdef CONFIG_SYS_FSL_DDR4 + rd_to_pre = picos_to_mclk(7500); +#else rd_to_pre = picos_to_mclk(common_dimm->trtp_ps); +#endif /* * JEDEC has some min requirements for tRTP */ #if defined(CONFIG_SYS_FSL_DDR2) if (rd_to_pre < 2) rd_to_pre = 2; -#elif defined(CONFIG_SYS_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) if (rd_to_pre < 4) rd_to_pre = 4; #endif @@ -541,13 +616,20 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, rd_to_pre += 2; /* according to UM */ wr_data_delay = popts->write_data_delay; +#ifdef CONFIG_SYS_FSL_DDR4 + cpo = 0; + cke_pls = max(3, picos_to_mclk(5000)); +#else cke_pls = picos_to_mclk(popts->tcke_clock_pulse_width_ps); +#endif + four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps); ddr->timing_cfg_2 = (0 | ((add_lat_mclk & 0xf) << 28) | ((cpo & 0x1f) << 23) | ((wr_lat & 0xf) << 19) + | ((wr_lat & 0x10) << 14) | ((rd_to_pre & RD_TO_PRE_MASK) << RD_TO_PRE_SHIFT) | ((wr_data_delay & WR_DATA_DELAY_MASK) << WR_DATA_DELAY_SHIFT) | ((cke_pls & 0x7) << 6) @@ -640,7 +722,8 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, * we must clear it when use the on-the-fly mode, * must set it when use the 32-bits bus mode. */ - if (sdram_type == SDRAM_TYPE_DDR3) { + if ((sdram_type == SDRAM_TYPE_DDR3) || + (sdram_type == SDRAM_TYPE_DDR4)) { if (popts->burst_length == DDR_BL8) eight_be = 1; if (popts->burst_length == DDR_OTF) @@ -682,8 +765,6 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, { unsigned int frc_sr = 0; /* Force self refresh */ unsigned int sr_ie = 0; /* Self-refresh interrupt enable */ - unsigned int dll_rst_dis; /* DLL reset disable */ - unsigned int dqs_cfg; /* DQS configuration */ unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ unsigned int slow = 0; /* DDR will be run less than 1250 */ @@ -695,9 +776,12 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int md_en = 0; /* Mirrored DIMM Enable */ unsigned int qd_en = 0; /* quad-rank DIMM Enable */ int i; +#ifndef CONFIG_SYS_FSL_DDR4 + unsigned int dll_rst_dis = 1; /* DLL reset disable */ + unsigned int dqs_cfg; /* DQS configuration */ - dll_rst_dis = 1; /* Make this configurable */ dqs_cfg = popts->dqs_config; +#endif for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (popts->cs_local_opts[i].odt_rd_cfg || popts->cs_local_opts[i].odt_wr_cfg) { @@ -715,7 +799,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, * * ({EXT_REFREC || REFREC} + 8 + 2)]} * << DDR_SDRAM_INTERVAL[REFINT] */ -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) obc_cfg = popts->otf_burst_chop_en; #else obc_cfg = 0; @@ -744,15 +828,17 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, d_init = 0; #endif -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) md_en = popts->mirrored_dimm; #endif qd_en = popts->quad_rank_present ? 1 : 0; ddr->ddr_sdram_cfg_2 = (0 | ((frc_sr & 0x1) << 31) | ((sr_ie & 0x1) << 30) +#ifndef CONFIG_SYS_FSL_DDR4 | ((dll_rst_dis & 0x1) << 29) | ((dqs_cfg & 0x3) << 26) +#endif | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) | ((slow & 1) << 11) @@ -768,6 +854,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2); } +#ifdef CONFIG_SYS_FSL_DDR4 /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, @@ -776,8 +863,93 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, { unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ + int i; + unsigned int wr_crc = 0; /* Disable */ + unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ + unsigned int srt = 0; /* self-refresh temerature, normal range */ + unsigned int cwl = compute_cas_write_latency() - 9; + unsigned int mpr = 0; /* serial */ + unsigned int wc_lat; + const unsigned int mclk_ps = get_memory_clk_period_ps(); -#if defined(CONFIG_SYS_FSL_DDR3) + if (popts->rtt_override) + rtt_wr = popts->rtt_wr_override_value; + else + rtt_wr = popts->cs_local_opts[0].odt_rtt_wr; + + if (common_dimm->extended_op_srt) + srt = common_dimm->extended_op_srt; + + esdmode2 = (0 + | ((wr_crc & 0x1) << 12) + | ((rtt_wr & 0x3) << 9) + | ((srt & 0x3) << 6) + | ((cwl & 0x7) << 3)); + + if (mclk_ps >= 1250) + wc_lat = 0; + else if (mclk_ps >= 833) + wc_lat = 1; + else + wc_lat = 2; + + esdmode3 = (0 + | ((mpr & 0x3) << 11) + | ((wc_lat & 0x3) << 9)); + + ddr->ddr_sdram_mode_2 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); + + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (popts->rtt_override) + rtt_wr = popts->rtt_wr_override_value; + else + rtt_wr = popts->cs_local_opts[i].odt_rtt_wr; + + esdmode2 &= 0xF9FF; /* clear bit 10, 9 */ + esdmode2 |= (rtt_wr & 0x3) << 9; + switch (i) { + case 1: + ddr->ddr_sdram_mode_4 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_6 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_8 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_4 = 0x%08x\n", + ddr->ddr_sdram_mode_4); + debug("FSLDDR: ddr_sdram_mode_6 = 0x%08x\n", + ddr->ddr_sdram_mode_6); + debug("FSLDDR: ddr_sdram_mode_8 = 0x%08x\n", + ddr->ddr_sdram_mode_8); + } +} +#elif defined(CONFIG_SYS_FSL_DDR3) +/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ +static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + const unsigned int unq_mrs_en) +{ + unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ + unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ int i; unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ unsigned int srt = 0; /* self-refresh temerature, normal range */ @@ -799,14 +971,12 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, | ((asr & 0x1) << 6) | ((cwl & 0x7) << 3) | ((pasr & 0x7) << 0)); -#endif ddr->ddr_sdram_mode_2 = (0 | ((esdmode2 & 0xFFFF) << 16) | ((esdmode3 & 0xFFFF) << 0) ); debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); -#ifdef CONFIG_SYS_FSL_DDR3 if (unq_mrs_en) { /* unique mode registers are supported */ for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (popts->rtt_override) @@ -844,9 +1014,128 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: ddr_sdram_mode_8 = 0x%08x\n", ddr->ddr_sdram_mode_8); } +} + +#else /* for DDR2 and DDR1 */ +/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ +static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + const unsigned int unq_mrs_en) +{ + unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ + unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ + + ddr->ddr_sdram_mode_2 = (0 + | ((esdmode2 & 0xFFFF) << 16) + | ((esdmode3 & 0xFFFF) << 0) + ); + debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); +} #endif + +#ifdef CONFIG_SYS_FSL_DDR4 +/* DDR SDRAM Mode configuration 9 (DDR_SDRAM_MODE_9) */ +static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + const unsigned int unq_mrs_en) +{ + int i; + unsigned short esdmode4 = 0; /* Extended SDRAM mode 4 */ + unsigned short esdmode5; /* Extended SDRAM mode 5 */ + + esdmode5 = 0x00000400; /* Data mask enabled */ + + ddr->ddr_sdram_mode_9 = (0 + | ((esdmode4 & 0xffff) << 16) + | ((esdmode5 & 0xffff) << 0) + ); + debug("FSLDDR: ddr_sdram_mode_9) = 0x%08x\n", ddr->ddr_sdram_mode_9); + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + switch (i) { + case 1: + ddr->ddr_sdram_mode_11 = (0 + | ((esdmode4 & 0xFFFF) << 16) + | ((esdmode5 & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_13 = (0 + | ((esdmode4 & 0xFFFF) << 16) + | ((esdmode5 & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_15 = (0 + | ((esdmode4 & 0xFFFF) << 16) + | ((esdmode5 & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_11 = 0x%08x\n", + ddr->ddr_sdram_mode_11); + debug("FSLDDR: ddr_sdram_mode_13 = 0x%08x\n", + ddr->ddr_sdram_mode_13); + debug("FSLDDR: ddr_sdram_mode_15 = 0x%08x\n", + ddr->ddr_sdram_mode_15); + } +} + +/* DDR SDRAM Mode configuration 10 (DDR_SDRAM_MODE_10) */ +static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + const unsigned int unq_mrs_en) +{ + int i; + unsigned short esdmode6 = 0; /* Extended SDRAM mode 6 */ + unsigned short esdmode7 = 0; /* Extended SDRAM mode 7 */ + unsigned int tccdl_min = picos_to_mclk(common_dimm->tccdl_ps); + + esdmode6 = ((tccdl_min - 4) & 0x7) << 10; + + ddr->ddr_sdram_mode_10 = (0 + | ((esdmode6 & 0xffff) << 16) + | ((esdmode7 & 0xffff) << 0) + ); + debug("FSLDDR: ddr_sdram_mode_10) = 0x%08x\n", ddr->ddr_sdram_mode_10); + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + switch (i) { + case 1: + ddr->ddr_sdram_mode_12 = (0 + | ((esdmode6 & 0xFFFF) << 16) + | ((esdmode7 & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_14 = (0 + | ((esdmode6 & 0xFFFF) << 16) + | ((esdmode7 & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_16 = (0 + | ((esdmode6 & 0xFFFF) << 16) + | ((esdmode7 & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_12 = 0x%08x\n", + ddr->ddr_sdram_mode_12); + debug("FSLDDR: ddr_sdram_mode_14 = 0x%08x\n", + ddr->ddr_sdram_mode_14); + debug("FSLDDR: ddr_sdram_mode_16 = 0x%08x\n", + ddr->ddr_sdram_mode_16); + } } +#endif + /* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, @@ -867,7 +1156,7 @@ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval); } -#if defined(CONFIG_SYS_FSL_DDR3) +#ifdef CONFIG_SYS_FSL_DDR4 /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, @@ -876,6 +1165,177 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, unsigned int additive_latency, const unsigned int unq_mrs_en) { + int i; + unsigned short esdmode; /* Extended SDRAM mode */ + unsigned short sdmode; /* SDRAM mode */ + + /* Mode Register - MR1 */ + unsigned int qoff = 0; /* Output buffer enable 0=yes, 1=no */ + unsigned int tdqs_en = 0; /* TDQS Enable: 0=no, 1=yes */ + unsigned int rtt; + unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */ + unsigned int al = 0; /* Posted CAS# additive latency (AL) */ + unsigned int dic = 0; /* Output driver impedance, 40ohm */ + unsigned int dll_en = 1; /* DLL Enable 1=Enable (Normal), + 0=Disable (Test/Debug) */ + + /* Mode Register - MR0 */ + unsigned int wr = 0; /* Write Recovery */ + unsigned int dll_rst; /* DLL Reset */ + unsigned int mode; /* Normal=0 or Test=1 */ + unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */ + /* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */ + unsigned int bt; + unsigned int bl; /* BL: Burst Length */ + + unsigned int wr_mclk; + /* DDR4 support WR 10, 12, 14, 16, 18, 20, 24 */ + static const u8 wr_table[] = { + 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 6, 6}; + /* DDR4 support CAS 9, 10, 11, 12, 13, 14, 15, 16, 18, 20, 22, 24 */ + static const u8 cas_latency_table[] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, + 9, 9, 10, 10, 11, 11}; + + if (popts->rtt_override) + rtt = popts->rtt_override_value; + else + rtt = popts->cs_local_opts[0].odt_rtt_norm; + + if (additive_latency == (cas_latency - 1)) + al = 1; + if (additive_latency == (cas_latency - 2)) + al = 2; + + if (popts->quad_rank_present) + dic = 1; /* output driver impedance 240/7 ohm */ + + /* + * The esdmode value will also be used for writing + * MR1 during write leveling for DDR3, although the + * bits specifically related to the write leveling + * scheme will be handled automatically by the DDR + * controller. so we set the wrlvl_en = 0 here. + */ + esdmode = (0 + | ((qoff & 0x1) << 12) + | ((tdqs_en & 0x1) << 11) + | ((rtt & 0x7) << 8) + | ((wrlvl_en & 0x1) << 7) + | ((al & 0x3) << 3) + | ((dic & 0x3) << 1) /* DIC field is split */ + | ((dll_en & 0x1) << 0) + ); + + /* + * DLL control for precharge PD + * 0=slow exit DLL off (tXPDLL) + * 1=fast exit DLL on (tXP) + */ + + wr_mclk = picos_to_mclk(common_dimm->twr_ps); + if (wr_mclk <= 24) { + wr = wr_table[wr_mclk - 10]; + } else { + printf("Error: unsupported write recovery for mode register wr_mclk = %d\n", + wr_mclk); + } + + dll_rst = 0; /* dll no reset */ + mode = 0; /* normal mode */ + + /* look up table to get the cas latency bits */ + if (cas_latency >= 9 && cas_latency <= 24) + caslat = cas_latency_table[cas_latency - 9]; + else + printf("Error: unsupported cas latency for mode register\n"); + + bt = 0; /* Nibble sequential */ + + switch (popts->burst_length) { + case DDR_BL8: + bl = 0; + break; + case DDR_OTF: + bl = 1; + break; + case DDR_BC4: + bl = 2; + break; + default: + printf("Error: invalid burst length of %u specified. ", + popts->burst_length); + puts("Defaulting to on-the-fly BC4 or BL8 beats.\n"); + bl = 1; + break; + } + + sdmode = (0 + | ((wr & 0x7) << 9) + | ((dll_rst & 0x1) << 8) + | ((mode & 0x1) << 7) + | (((caslat >> 1) & 0x7) << 4) + | ((bt & 0x1) << 3) + | ((caslat & 1) << 2) + | ((bl & 0x3) << 0) + ); + + ddr->ddr_sdram_mode = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + + debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode); + + if (unq_mrs_en) { /* unique mode registers are supported */ + for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (popts->rtt_override) + rtt = popts->rtt_override_value; + else + rtt = popts->cs_local_opts[i].odt_rtt_norm; + + esdmode &= 0xF8FF; /* clear bit 10,9,8 for rtt */ + esdmode |= (rtt & 0x7) << 8; + switch (i) { + case 1: + ddr->ddr_sdram_mode_3 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + case 2: + ddr->ddr_sdram_mode_5 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + case 3: + ddr->ddr_sdram_mode_7 = (0 + | ((esdmode & 0xFFFF) << 16) + | ((sdmode & 0xFFFF) << 0) + ); + break; + } + } + debug("FSLDDR: ddr_sdram_mode_3 = 0x%08x\n", + ddr->ddr_sdram_mode_3); + debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n", + ddr->ddr_sdram_mode_5); + debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n", + ddr->ddr_sdram_mode_5); + } +} + +#elif defined(CONFIG_SYS_FSL_DDR3) +/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ +static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + unsigned int cas_latency, + unsigned int additive_latency, + const unsigned int unq_mrs_en) +{ + int i; unsigned short esdmode; /* Extended SDRAM mode */ unsigned short sdmode; /* SDRAM mode */ @@ -907,9 +1367,6 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, */ static const u8 wr_table[] = {1, 2, 3, 4, 5, 5, 6, 6, 7, 7, 0, 0}; - const unsigned int mclk_ps = get_memory_clk_period_ps(); - int i; - if (popts->rtt_override) rtt = popts->rtt_override_value; else @@ -950,7 +1407,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, */ dll_on = 1; - wr_mclk = (common_dimm->twr_ps + mclk_ps - 1) / mclk_ps; + wr_mclk = picos_to_mclk(common_dimm->twr_ps); if (wr_mclk <= 16) { wr = wr_table[wr_mclk - 5]; } else { @@ -1109,9 +1566,6 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, unsigned int bt; unsigned int bl; /* BL: Burst Length */ -#if defined(CONFIG_SYS_FSL_DDR2) - const unsigned int mclk_ps = get_memory_clk_period_ps(); -#endif dqs_en = !popts->dqs_config; rtt = fsl_ddr_get_rtt(); @@ -1141,7 +1595,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #if defined(CONFIG_SYS_FSL_DDR1) wr = 0; /* Historical */ #elif defined(CONFIG_SYS_FSL_DDR2) - wr = (common_dimm->twr_ps + mclk_ps - 1) / mclk_ps - 1; + wr = picos_to_mclk(common_dimm->twr_ps); #endif dll_res = 0; mode = 0; @@ -1255,7 +1709,7 @@ static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr, unsigned int wwt = 0; /* Write-to-write turnaround for same CS */ unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */ -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) if (popts->burst_length == DDR_BL8) { /* We set BL/2 for fixed BL8 */ rrt = 0; /* BL/2 clocks */ @@ -1265,6 +1719,11 @@ static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr, rrt = 2; /* BL/2 + 2 clocks */ wwt = 2; /* BL/2 + 2 clocks */ } +#endif + +#ifdef CONFIG_SYS_FSL_DDR4 + dll_lock = 2; /* tDLLK = 1024 clocks */ +#elif defined(CONFIG_SYS_FSL_DDR3) dll_lock = 1; /* tDLLK = 512 clocks from spec */ #endif ddr->timing_cfg_4 = (0 @@ -1285,9 +1744,12 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr, unsigned int cas_latency) unsigned int wodt_on = 0; /* Write to ODT on */ unsigned int wodt_off = 0; /* Write to ODT off */ -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) + unsigned int wr_lat = ((ddr->timing_cfg_2 & 0x00780000) >> 19) + + ((ddr->timing_cfg_2 & 0x00040000) >> 14); /* rodt_on = timing_cfg_1[caslat] - timing_cfg_2[wrlat] + 1 */ - rodt_on = cas_latency - ((ddr->timing_cfg_2 & 0x00780000) >> 19) + 1; + if (cas_latency >= wr_lat) + rodt_on = cas_latency - wr_lat + 1; rodt_off = 4; /* 4 clocks */ wodt_on = 1; /* 1 clocks */ wodt_off = 4; /* 4 clocks */ @@ -1302,6 +1764,164 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr, unsigned int cas_latency) debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5); } +#ifdef CONFIG_SYS_FSL_DDR4 +static void set_timing_cfg_6(fsl_ddr_cfg_regs_t *ddr) +{ + unsigned int hs_caslat = 0; + unsigned int hs_wrlat = 0; + unsigned int hs_wrrec = 0; + unsigned int hs_clkadj = 0; + unsigned int hs_wrlvl_start = 0; + + ddr->timing_cfg_6 = (0 + | ((hs_caslat & 0x1f) << 24) + | ((hs_wrlat & 0x1f) << 19) + | ((hs_wrrec & 0x1f) << 12) + | ((hs_clkadj & 0x1f) << 6) + | ((hs_wrlvl_start & 0x1f) << 0) + ); + debug("FSLDDR: timing_cfg_6 = 0x%08x\n", ddr->timing_cfg_6); +} + +static void set_timing_cfg_7(fsl_ddr_cfg_regs_t *ddr, + const common_timing_params_t *common_dimm) +{ + unsigned int txpr, tcksre, tcksrx; + unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd; + + txpr = max(5, picos_to_mclk(common_dimm->trfc1_ps + 10000)); + tcksre = max(5, picos_to_mclk(10000)); + tcksrx = max(5, picos_to_mclk(10000)); + par_lat = 0; + cs_to_cmd = 0; + + if (txpr <= 200) + cke_rst = 0; + else if (txpr <= 256) + cke_rst = 1; + else if (txpr <= 512) + cke_rst = 2; + else + cke_rst = 3; + + if (tcksre <= 19) + cksre = tcksre - 5; + else + cksre = 15; + + if (tcksrx <= 19) + cksrx = tcksrx - 5; + else + cksrx = 15; + + ddr->timing_cfg_7 = (0 + | ((cke_rst & 0x3) << 28) + | ((cksre & 0xf) << 24) + | ((cksrx & 0xf) << 20) + | ((par_lat & 0xf) << 16) + | ((cs_to_cmd & 0xf) << 4) + ); + debug("FSLDDR: timing_cfg_7 = 0x%08x\n", ddr->timing_cfg_7); +} + +static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + unsigned int cas_latency) +{ + unsigned int rwt_bg, wrt_bg, rrt_bg, wwt_bg; + unsigned int acttoact_bg, wrtord_bg, pre_all_rec; + unsigned int tccdl = picos_to_mclk(common_dimm->tccdl_ps); + unsigned int wr_lat = ((ddr->timing_cfg_2 & 0x00780000) >> 19) + + ((ddr->timing_cfg_2 & 0x00040000) >> 14); + + rwt_bg = cas_latency + 2 + 4 - wr_lat; + if (rwt_bg < tccdl) + rwt_bg = tccdl - rwt_bg; + else + rwt_bg = 0; + + wrt_bg = wr_lat + 4 + 1 - cas_latency; + if (wrt_bg < tccdl) + wrt_bg = tccdl - wrt_bg; + else + wrt_bg = 0; + + if (popts->burst_length == DDR_BL8) { + rrt_bg = tccdl - 4; + wwt_bg = tccdl - 4; + } else { + rrt_bg = tccdl - 2; + wwt_bg = tccdl - 4; + } + + acttoact_bg = picos_to_mclk(common_dimm->trrdl_ps); + wrtord_bg = max(4, picos_to_mclk(7500)); + pre_all_rec = 0; + + ddr->timing_cfg_8 = (0 + | ((rwt_bg & 0xf) << 28) + | ((wrt_bg & 0xf) << 24) + | ((rrt_bg & 0xf) << 20) + | ((wwt_bg & 0xf) << 16) + | ((acttoact_bg & 0xf) << 12) + | ((wrtord_bg & 0xf) << 8) + | ((pre_all_rec & 0x1f) << 0) + ); + + debug("FSLDDR: timing_cfg_8 = 0x%08x\n", ddr->timing_cfg_8); +} + +static void set_timing_cfg_9(fsl_ddr_cfg_regs_t *ddr) +{ + ddr->timing_cfg_9 = 0; + debug("FSLDDR: timing_cfg_9 = 0x%08x\n", ddr->timing_cfg_9); +} + +static void set_ddr_dq_mapping(fsl_ddr_cfg_regs_t *ddr, + const dimm_params_t *dimm_params) +{ + ddr->dq_map_0 = ((dimm_params->dq_mapping[0] & 0x3F) << 26) | + ((dimm_params->dq_mapping[1] & 0x3F) << 20) | + ((dimm_params->dq_mapping[2] & 0x3F) << 14) | + ((dimm_params->dq_mapping[3] & 0x3F) << 8) | + ((dimm_params->dq_mapping[4] & 0x3F) << 2); + + ddr->dq_map_1 = ((dimm_params->dq_mapping[5] & 0x3F) << 26) | + ((dimm_params->dq_mapping[6] & 0x3F) << 20) | + ((dimm_params->dq_mapping[7] & 0x3F) << 14) | + ((dimm_params->dq_mapping[10] & 0x3F) << 8) | + ((dimm_params->dq_mapping[11] & 0x3F) << 2); + + ddr->dq_map_2 = ((dimm_params->dq_mapping[12] & 0x3F) << 26) | + ((dimm_params->dq_mapping[13] & 0x3F) << 20) | + ((dimm_params->dq_mapping[14] & 0x3F) << 14) | + ((dimm_params->dq_mapping[15] & 0x3F) << 8) | + ((dimm_params->dq_mapping[16] & 0x3F) << 2); + + ddr->dq_map_3 = ((dimm_params->dq_mapping[17] & 0x3F) << 26) | + ((dimm_params->dq_mapping[8] & 0x3F) << 20) | + ((dimm_params->dq_mapping[9] & 0x3F) << 14) | + dimm_params->dq_mapping_ors; + + debug("FSLDDR: dq_map_0 = 0x%08x\n", ddr->dq_map_0); + debug("FSLDDR: dq_map_1 = 0x%08x\n", ddr->dq_map_1); + debug("FSLDDR: dq_map_2 = 0x%08x\n", ddr->dq_map_2); + debug("FSLDDR: dq_map_3 = 0x%08x\n", ddr->dq_map_3); +} +static void set_ddr_sdram_cfg_3(fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts) +{ + int rd_pre; + + rd_pre = popts->quad_rank_present ? 1 : 0; + + ddr->ddr_sdram_cfg_3 = (rd_pre & 0x1) << 16; + + debug("FSLDDR: ddr_sdram_cfg_3 = 0x%08x\n", ddr->ddr_sdram_cfg_3); +} +#endif /* CONFIG_SYS_FSL_DDR4 */ + /* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */ static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en) { @@ -1310,11 +1930,21 @@ static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en) unsigned int zqoper = 0; /* Normal Operation Short Calibration Time (tZQCS) */ unsigned int zqcs = 0; +#ifdef CONFIG_SYS_FSL_DDR4 + unsigned int zqcs_init; +#endif if (zq_en) { +#ifdef CONFIG_SYS_FSL_DDR4 + zqinit = 10; /* 1024 clocks */ + zqoper = 9; /* 512 clocks */ + zqcs = 7; /* 128 clocks */ + zqcs_init = 5; /* 1024 refresh sequences */ +#else zqinit = 9; /* 512 clocks */ zqoper = 8; /* 256 clocks */ zqcs = 6; /* 64 clocks */ +#endif } ddr->ddr_zq_cntl = (0 @@ -1322,6 +1952,9 @@ static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en) | ((zqinit & 0xF) << 24) | ((zqoper & 0xF) << 16) | ((zqcs & 0xF) << 8) +#ifdef CONFIG_SYS_FSL_DDR4 + | ((zqcs_init & 0xF) << 0) +#endif ); debug("FSLDDR: zq_cntl = 0x%08x\n", ddr->ddr_zq_cntl); } @@ -1478,7 +2111,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, */ cas_latency = (popts->cas_latency_override) ? popts->cas_latency_override_value - : common_dimm->lowest_common_SPD_caslat; + : common_dimm->lowest_common_spd_caslat; additive_latency = (popts->additive_latency_override) ? popts->additive_latency_override_value @@ -1639,6 +2272,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_sdram_mode(ddr, popts, common_dimm, cas_latency, additive_latency, unq_mrs_en); set_ddr_sdram_mode_2(ddr, popts, common_dimm, unq_mrs_en); +#ifdef CONFIG_SYS_FSL_DDR4 + set_ddr_sdram_mode_9(ddr, popts, common_dimm, unq_mrs_en); + set_ddr_sdram_mode_10(ddr, popts, common_dimm, unq_mrs_en); +#endif set_ddr_sdram_interval(ddr, popts, common_dimm); set_ddr_data_init(ddr); set_ddr_sdram_clk_cntl(ddr, popts); @@ -1646,6 +2283,14 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_init_ext_addr(ddr); set_timing_cfg_4(ddr, popts); set_timing_cfg_5(ddr, cas_latency); +#ifdef CONFIG_SYS_FSL_DDR4 + set_ddr_sdram_cfg_3(ddr, popts); + set_timing_cfg_6(ddr); + set_timing_cfg_7(ddr, common_dimm); + set_timing_cfg_8(ddr, popts, common_dimm, cas_latency); + set_timing_cfg_9(ddr); + set_ddr_dq_mapping(ddr, dimm_params); +#endif set_ddr_zq_cntl(ddr, zq_en); set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts); diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c new file mode 100644 index 00000000000..4745b7fb1bf --- /dev/null +++ b/drivers/ddr/fsl/ddr4_dimm_params.c @@ -0,0 +1,300 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * calculate the organization and timing parameter + * from ddr3 spd, please refer to the spec + * JEDEC standard No.21-C 4_01_02_12R23A.pdf + * + * + */ + +#include <common.h> +#include <fsl_ddr_sdram.h> + +#include <fsl_ddr.h> + +/* + * Calculate the Density of each Physical Rank. + * Returned size is in bytes. + * + * Total DIMM size = + * sdram capacity(bit) / 8 * primary bus width / sdram width + * * Logical Ranks per DIMM + * + * where: sdram capacity = spd byte4[3:0] + * primary bus width = spd byte13[2:0] + * sdram width = spd byte12[2:0] + * Logical Ranks per DIMM = spd byte12[5:3] for SDP, DDP, QDP + * spd byte12{5:3] * spd byte6[6:4] for 3DS + * + * To simplify each rank size = total DIMM size / Number of Package Ranks + * where Number of Package Ranks = spd byte12[5:3] + * + * SPD byte4 - sdram density and banks + * bit[3:0] size(bit) size(byte) + * 0000 256Mb 32MB + * 0001 512Mb 64MB + * 0010 1Gb 128MB + * 0011 2Gb 256MB + * 0100 4Gb 512MB + * 0101 8Gb 1GB + * 0110 16Gb 2GB + * 0111 32Gb 4GB + * + * SPD byte13 - module memory bus width + * bit[2:0] primary bus width + * 000 8bits + * 001 16bits + * 010 32bits + * 011 64bits + * + * SPD byte12 - module organization + * bit[2:0] sdram device width + * 000 4bits + * 001 8bits + * 010 16bits + * 011 32bits + * + * SPD byte12 - module organization + * bit[5:3] number of package ranks per DIMM + * 000 1 + * 001 2 + * 010 3 + * 011 4 + * + * SPD byte6 - SDRAM package type + * bit[6:4] Die count + * 000 1 + * 001 2 + * 010 3 + * 011 4 + * 100 5 + * 101 6 + * 110 7 + * 111 8 + * + * SPD byte6 - SRAM package type + * bit[1:0] Signal loading + * 00 Not specified + * 01 Multi load stack + * 10 Sigle load stack (3DS) + * 11 Reserved + */ +static unsigned long long +compute_ranksize(const struct ddr4_spd_eeprom_s *spd) +{ + unsigned long long bsize; + + int nbit_sdram_cap_bsize = 0; + int nbit_primary_bus_width = 0; + int nbit_sdram_width = 0; + int die_count = 0; + bool package_3ds; + + if ((spd->density_banks & 0xf) <= 7) + nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28; + if ((spd->bus_width & 0x7) < 4) + nbit_primary_bus_width = (spd->bus_width & 0x7) + 3; + if ((spd->organization & 0x7) < 4) + nbit_sdram_width = (spd->organization & 0x7) + 2; + package_3ds = (spd->package_type & 0x3) == 0x2; + if (package_3ds) + die_count = (spd->package_type >> 4) & 0x7; + + bsize = 1ULL << (nbit_sdram_cap_bsize - 3 + + nbit_primary_bus_width - nbit_sdram_width + + die_count); + + debug("DDR: DDR III rank density = 0x%16llx\n", bsize); + + return bsize; +} + +#define spd_to_ps(mtb, ftb) \ + (mtb * pdimm->mtb_ps + (ftb * pdimm->ftb_10th_ps) / 10) +/* + * ddr_compute_dimm_parameters for DDR3 SPD + * + * Compute DIMM parameters based upon the SPD information in spd. + * Writes the results to the dimm_params_t structure pointed by pdimm. + * + */ +unsigned int +ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) +{ + unsigned int retval; + int i; + + if (spd->mem_type) { + if (spd->mem_type != SPD_MEMTYPE_DDR4) { + printf("DIMM %u: is not a DDR4 SPD.\n", dimm_number); + return 1; + } + } else { + memset(pdimm, 0, sizeof(dimm_params_t)); + return 1; + } + + retval = ddr4_spd_check(spd); + if (retval) { + printf("DIMM %u: failed checksum\n", dimm_number); + return 2; + } + + /* + * The part name in ASCII in the SPD EEPROM is not null terminated. + * Guarantee null termination here by presetting all bytes to 0 + * and copying the part name in ASCII from the SPD onto it + */ + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + if ((spd->info_size_crc & 0xF) > 2) + memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1); + + /* DIMM organization parameters */ + pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1; + pdimm->rank_density = compute_ranksize(spd); + pdimm->capacity = pdimm->n_ranks * pdimm->rank_density; + pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7)); + if ((spd->bus_width >> 3) & 0x3) + pdimm->ec_sdram_width = 8; + else + pdimm->ec_sdram_width = 0; + pdimm->data_width = pdimm->primary_sdram_width + + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); + + /* These are the types defined by the JEDEC DDR3 SPD spec */ + pdimm->mirrored_dimm = 0; + pdimm->registered_dimm = 0; + switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) { + case DDR3_SPD_MODULETYPE_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; + break; + + case DDR3_SPD_MODULETYPE_UDIMM: + case DDR3_SPD_MODULETYPE_SO_DIMM: + /* Unbuffered DIMMs */ + if (spd->mod_section.unbuffered.addr_mapping & 0x1) + pdimm->mirrored_dimm = 1; + break; + + default: + printf("unknown module_type 0x%02X\n", spd->module_type); + return 1; + } + + /* SDRAM device parameters */ + pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12; + pdimm->n_col_addr = (spd->addressing & 0x7) + 9; + pdimm->bank_addr_bits = (spd->density_banks >> 4) & 0x3; + pdimm->bank_group_bits = (spd->density_banks >> 6) & 0x3; + + /* + * The SPD spec has not the ECC bit, + * We consider the DIMM as ECC capability + * when the extension bus exist + */ + if (pdimm->ec_sdram_width) + pdimm->edc_config = 0x02; + else + pdimm->edc_config = 0x00; + + /* + * The SPD spec has not the burst length byte + * but DDR4 spec has nature BL8 and BC4, + * BL8 -bit3, BC4 -bit2 + */ + pdimm->burst_lengths_bitmask = 0x0c; + pdimm->row_density = __ilog2(pdimm->rank_density); + + /* MTB - medium timebase + * The MTB in the SPD spec is 125ps, + * + * FTB - fine timebase + * use 1/10th of ps as our unit to avoid floating point + * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps + */ + if ((spd->timebases & 0xf) == 0x0) { + pdimm->mtb_ps = 125; + pdimm->ftb_10th_ps = 10; + + } else { + printf("Unknown Timebases\n"); + } + + /* sdram minimum cycle time */ + pdimm->tckmin_x_ps = spd_to_ps(spd->tck_min, spd->fine_tck_min); + + /* sdram max cycle time */ + pdimm->tckmax_ps = spd_to_ps(spd->tck_max, spd->fine_tck_max); + + /* + * CAS latency supported + * bit0 - CL7 + * bit4 - CL11 + * bit8 - CL15 + * bit12- CL19 + * bit16- CL23 + */ + pdimm->caslat_x = (spd->caslat_b1 << 7) | + (spd->caslat_b2 << 15) | + (spd->caslat_b3 << 23); + + BUG_ON(spd->caslat_b4 != 0); + + /* + * min CAS latency time + */ + pdimm->taa_ps = spd_to_ps(spd->taa_min, spd->fine_taa_min); + + /* + * min RAS to CAS delay time + */ + pdimm->trcd_ps = spd_to_ps(spd->trcd_min, spd->fine_trcd_min); + + /* + * Min Row Precharge Delay Time + */ + pdimm->trp_ps = spd_to_ps(spd->trp_min, spd->fine_trp_min); + + /* min active to precharge delay time */ + pdimm->tras_ps = (((spd->tras_trc_ext & 0xf) << 8) + + spd->tras_min_lsb) * pdimm->mtb_ps; + + /* min active to actice/refresh delay time */ + pdimm->trc_ps = spd_to_ps((((spd->tras_trc_ext & 0xf0) << 4) + + spd->trc_min_lsb), spd->fine_trc_min); + /* Min Refresh Recovery Delay Time */ + pdimm->trfc1_ps = ((spd->trfc1_min_msb << 8) | (spd->trfc1_min_lsb)) * + pdimm->mtb_ps; + pdimm->trfc2_ps = ((spd->trfc2_min_msb << 8) | (spd->trfc2_min_lsb)) * + pdimm->mtb_ps; + pdimm->trfc4_ps = ((spd->trfc4_min_msb << 8) | (spd->trfc4_min_lsb)) * + pdimm->mtb_ps; + /* min four active window delay time */ + pdimm->tfaw_ps = (((spd->tfaw_msb & 0xf) << 8) | spd->tfaw_min) * + pdimm->mtb_ps; + + /* min row active to row active delay time, different bank group */ + pdimm->trrds_ps = spd_to_ps(spd->trrds_min, spd->fine_trrds_min); + /* min row active to row active delay time, same bank group */ + pdimm->trrdl_ps = spd_to_ps(spd->trrdl_min, spd->fine_trrdl_min); + /* min CAS to CAS Delay Time (tCCD_Lmin), same bank group */ + pdimm->tccdl_ps = spd_to_ps(spd->tccdl_min, spd->fine_tccdl_min); + + /* + * Average periodic refresh interval + * tREFI = 7.8 us at normal temperature range + */ + pdimm->refresh_rate_ps = 7800000; + + for (i = 0; i < 18; i++) + pdimm->dq_mapping[i] = spd->mapping[i]; + + pdimm->dq_mapping_ors = ((spd->mapping[0] >> 6) & 0x3) == 0 ? 1 : 0; + + return 0; +} diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c new file mode 100644 index 00000000000..7cd878aeecb --- /dev/null +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -0,0 +1,234 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <fsl_ddr_sdram.h> +#include <asm/processor.h> +#include <fsl_ddr.h> + +#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) +#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL +#endif + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ +void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num, int step) +{ + unsigned int i, bus_width; + struct ccsr_ddr __iomem *ddr; + u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; + + switch (ctrl_num) { + case 0: + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + break; +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) + case 1: + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) + case 2: + ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) + case 3: + ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; + break; +#endif + default: + printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num); + return; + } + + if (step == 2) + goto step2; + + if (regs->ddr_eor) + ddr_out32(&ddr->eor, regs->ddr_eor); + + ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); + + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i == 0) { + ddr_out32(&ddr->cs0_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs0_config, regs->cs[i].config); + ddr_out32(&ddr->cs0_config_2, regs->cs[i].config_2); + + } else if (i == 1) { + ddr_out32(&ddr->cs1_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs1_config, regs->cs[i].config); + ddr_out32(&ddr->cs1_config_2, regs->cs[i].config_2); + + } else if (i == 2) { + ddr_out32(&ddr->cs2_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs2_config, regs->cs[i].config); + ddr_out32(&ddr->cs2_config_2, regs->cs[i].config_2); + + } else if (i == 3) { + ddr_out32(&ddr->cs3_bnds, regs->cs[i].bnds); + ddr_out32(&ddr->cs3_config, regs->cs[i].config); + ddr_out32(&ddr->cs3_config_2, regs->cs[i].config_2); + } + } + + ddr_out32(&ddr->timing_cfg_3, regs->timing_cfg_3); + ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0); + ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1); + ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2); + ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4); + ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5); + ddr_out32(&ddr->timing_cfg_6, regs->timing_cfg_6); + ddr_out32(&ddr->timing_cfg_7, regs->timing_cfg_7); + ddr_out32(&ddr->timing_cfg_8, regs->timing_cfg_8); + ddr_out32(&ddr->timing_cfg_9, regs->timing_cfg_9); + ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); + ddr_out32(&ddr->dq_map_0, regs->dq_map_0); + ddr_out32(&ddr->dq_map_1, regs->dq_map_1); + ddr_out32(&ddr->dq_map_2, regs->dq_map_2); + ddr_out32(&ddr->dq_map_3, regs->dq_map_3); + ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3); + ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode); + ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); + ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3); + ddr_out32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4); + ddr_out32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5); + ddr_out32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6); + ddr_out32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7); + ddr_out32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8); + ddr_out32(&ddr->sdram_mode_9, regs->ddr_sdram_mode_9); + ddr_out32(&ddr->sdram_mode_10, regs->ddr_sdram_mode_10); + ddr_out32(&ddr->sdram_mode_11, regs->ddr_sdram_mode_11); + ddr_out32(&ddr->sdram_mode_12, regs->ddr_sdram_mode_12); + ddr_out32(&ddr->sdram_mode_13, regs->ddr_sdram_mode_13); + ddr_out32(&ddr->sdram_mode_14, regs->ddr_sdram_mode_14); + ddr_out32(&ddr->sdram_mode_15, regs->ddr_sdram_mode_15); + ddr_out32(&ddr->sdram_mode_16, regs->ddr_sdram_mode_16); + ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); + ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval); + ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init); + ddr_out32(&ddr->init_addr, regs->ddr_init_addr); + ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); + ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); +#ifndef CONFIG_SYS_FSL_DDR_EMU + /* + * Skip these two registers if running on emulator + * because emulator doesn't have skew between bytes. + */ + + if (regs->ddr_wrlvl_cntl_2) + ddr_out32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + ddr_out32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); +#endif + + ddr_out32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); + ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); + ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); + ddr_out32(&ddr->ddr_sdram_rcw_3, regs->ddr_sdram_rcw_3); + ddr_out32(&ddr->ddr_sdram_rcw_4, regs->ddr_sdram_rcw_4); + ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5); + ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6); + ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1); + ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2); + ddr_out32(&ddr->err_disable, regs->err_disable); + ddr_out32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 32; i++) { + if (regs->debug[i]) { + debug("Write to debug_%d as %08x\n", + i+1, regs->debug[i]); + ddr_out32(&ddr->debug[i], regs->debug[i]); + } + } + + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: + /* Set, but do not enable the memory */ + temp_sdram_cfg = regs->ddr_sdram_cfg; + temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); + ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg); + + /* + * 500 painful micro-seconds must elapse between + * the DDR clock setup and the DDR config enable. + * DDR2 need 200 us, and DDR3 need 500 us from spec, + * we choose the max, that is 500 us for all of case. + */ + udelay(500); + asm volatile("sync;isync"); + + /* Let the controller go */ + temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); + asm volatile("sync;isync"); + + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 4) & 0x3) + 0 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */ + total_gb_size_per_controller *= 3; + else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (get_ddr_freq(0) >> 20)) << 2; + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ + while ((ddr_in32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); + +} diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c index ebf3ed6f388..cfe1e1f55aa 100644 --- a/drivers/ddr/fsl/interactive.c +++ b/drivers/ddr/fsl/interactive.c @@ -1,5 +1,5 @@ /* - * Copyright 2010-2012 Freescale Semiconductor, Inc. + * Copyright 2010-2014 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -153,25 +153,38 @@ static void lowest_common_dimm_parameters_edit(fsl_ddr_info_t *pinfo, static const struct options_string options[] = { COMMON_TIMING(tckmin_x_ps), COMMON_TIMING(tckmax_ps), - COMMON_TIMING(tckmax_max_ps), + COMMON_TIMING(taamin_ps), COMMON_TIMING(trcd_ps), COMMON_TIMING(trp_ps), COMMON_TIMING(tras_ps), - COMMON_TIMING(twr_ps), + +#ifdef CONFIG_SYS_FSL_DDR4 + COMMON_TIMING(trfc1_ps), + COMMON_TIMING(trfc2_ps), + COMMON_TIMING(trfc4_ps), + COMMON_TIMING(trrds_ps), + COMMON_TIMING(trrdl_ps), + COMMON_TIMING(tccdl_ps), +#else COMMON_TIMING(twtr_ps), COMMON_TIMING(trfc_ps), COMMON_TIMING(trrd_ps), + COMMON_TIMING(trtp_ps), +#endif + COMMON_TIMING(twr_ps), COMMON_TIMING(trc_ps), COMMON_TIMING(refresh_rate_ps), + COMMON_TIMING(extended_op_srt), +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) COMMON_TIMING(tis_ps), COMMON_TIMING(tih_ps), COMMON_TIMING(tds_ps), COMMON_TIMING(tdh_ps), - COMMON_TIMING(trtp_ps), COMMON_TIMING(tdqsq_max_ps), COMMON_TIMING(tqhs_ps), +#endif COMMON_TIMING(ndimms_present), - COMMON_TIMING(lowest_common_SPD_caslat), + COMMON_TIMING(lowest_common_spd_caslat), COMMON_TIMING(highest_common_derated_caslat), COMMON_TIMING(additive_latency), COMMON_TIMING(all_dimms_burst_lengths_bitmask), @@ -211,7 +224,12 @@ static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo, DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), DIMM_PARM(edc_config), +#ifdef CONFIG_SYS_FSL_DDR4 + DIMM_PARM(bank_addr_bits), + DIMM_PARM(bank_group_bits), +#else DIMM_PARM(n_banks_per_sdram_device), +#endif DIMM_PARM(burst_lengths_bitmask), DIMM_PARM(row_density), @@ -229,20 +247,32 @@ static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo, DIMM_PARM(trcd_ps), DIMM_PARM(trp_ps), DIMM_PARM(tras_ps), +#ifdef CONFIG_SYS_FSL_DDR4 + DIMM_PARM(trfc1_ps), + DIMM_PARM(trfc2_ps), + DIMM_PARM(trfc4_ps), + DIMM_PARM(trrds_ps), + DIMM_PARM(trrdl_ps), + DIMM_PARM(tccdl_ps), +#else DIMM_PARM(twr_ps), DIMM_PARM(twtr_ps), DIMM_PARM(trfc_ps), DIMM_PARM(trrd_ps), + DIMM_PARM(trtp_ps), +#endif DIMM_PARM(trc_ps), DIMM_PARM(refresh_rate_ps), + DIMM_PARM(extended_op_srt), +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) DIMM_PARM(tis_ps), DIMM_PARM(tih_ps), DIMM_PARM(tds_ps), DIMM_PARM(tdh_ps), - DIMM_PARM(trtp_ps), DIMM_PARM(tdqsq_max_ps), DIMM_PARM(tqhs_ps), +#endif DIMM_PARM(rank_density), DIMM_PARM(capacity), @@ -270,7 +300,12 @@ static void print_dimm_parameters(const dimm_params_t *pdimm) DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), DIMM_PARM(edc_config), +#ifdef CONFIG_SYS_FSL_DDR4 + DIMM_PARM(bank_addr_bits), + DIMM_PARM(bank_group_bits), +#else DIMM_PARM(n_banks_per_sdram_device), +#endif DIMM_PARM(tckmin_x_ps), DIMM_PARM(tckmin_x_minus_1_ps), @@ -286,20 +321,31 @@ static void print_dimm_parameters(const dimm_params_t *pdimm) DIMM_PARM(trcd_ps), DIMM_PARM(trp_ps), DIMM_PARM(tras_ps), +#ifdef CONFIG_SYS_FSL_DDR4 + DIMM_PARM(trfc1_ps), + DIMM_PARM(trfc2_ps), + DIMM_PARM(trfc4_ps), + DIMM_PARM(trrds_ps), + DIMM_PARM(trrdl_ps), + DIMM_PARM(tccdl_ps), +#else DIMM_PARM(twr_ps), DIMM_PARM(twtr_ps), DIMM_PARM(trfc_ps), DIMM_PARM(trrd_ps), + DIMM_PARM(trtp_ps), +#endif DIMM_PARM(trc_ps), DIMM_PARM(refresh_rate_ps), +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) DIMM_PARM(tis_ps), DIMM_PARM(tih_ps), DIMM_PARM(tds_ps), DIMM_PARM(tdh_ps), - DIMM_PARM(trtp_ps), DIMM_PARM(tdqsq_max_ps), DIMM_PARM(tqhs_ps), +#endif }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -326,23 +372,36 @@ static void print_lowest_common_dimm_parameters( const common_timing_params_t *plcd_dimm_params) { static const struct options_string options[] = { - COMMON_TIMING(tckmax_max_ps), + COMMON_TIMING(taamin_ps), COMMON_TIMING(trcd_ps), COMMON_TIMING(trp_ps), COMMON_TIMING(tras_ps), - COMMON_TIMING(twr_ps), +#ifdef CONFIG_SYS_FSL_DDR4 + COMMON_TIMING(trfc1_ps), + COMMON_TIMING(trfc2_ps), + COMMON_TIMING(trfc4_ps), + COMMON_TIMING(trrds_ps), + COMMON_TIMING(trrdl_ps), + COMMON_TIMING(tccdl_ps), +#else COMMON_TIMING(twtr_ps), COMMON_TIMING(trfc_ps), COMMON_TIMING(trrd_ps), + COMMON_TIMING(trtp_ps), +#endif + COMMON_TIMING(twr_ps), COMMON_TIMING(trc_ps), COMMON_TIMING(refresh_rate_ps), + COMMON_TIMING(extended_op_srt), +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) COMMON_TIMING(tis_ps), + COMMON_TIMING(tih_ps), COMMON_TIMING(tds_ps), COMMON_TIMING(tdh_ps), - COMMON_TIMING(trtp_ps), COMMON_TIMING(tdqsq_max_ps), COMMON_TIMING(tqhs_ps), - COMMON_TIMING(lowest_common_SPD_caslat), +#endif + COMMON_TIMING(lowest_common_spd_caslat), COMMON_TIMING(highest_common_derated_caslat), COMMON_TIMING(additive_latency), COMMON_TIMING(ndimms_present), @@ -460,6 +519,9 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(tfaw_window_four_activates_ps), CTRL_OPTIONS(trwt_override), CTRL_OPTIONS(trwt), + CTRL_OPTIONS(rtt_override), + CTRL_OPTIONS(rtt_override_value), + CTRL_OPTIONS(rtt_wr_override_value), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -505,6 +567,7 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(timing_cfg_2), CFG_REGS(ddr_sdram_cfg), CFG_REGS(ddr_sdram_cfg_2), + CFG_REGS(ddr_sdram_cfg_3), CFG_REGS(ddr_sdram_mode), CFG_REGS(ddr_sdram_mode_2), CFG_REGS(ddr_sdram_mode_3), @@ -513,6 +576,16 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(ddr_sdram_mode_6), CFG_REGS(ddr_sdram_mode_7), CFG_REGS(ddr_sdram_mode_8), +#ifdef CONFIG_SYS_FSL_DDR4 + CFG_REGS(ddr_sdram_mode_9), + CFG_REGS(ddr_sdram_mode_10), + CFG_REGS(ddr_sdram_mode_11), + CFG_REGS(ddr_sdram_mode_12), + CFG_REGS(ddr_sdram_mode_13), + CFG_REGS(ddr_sdram_mode_14), + CFG_REGS(ddr_sdram_mode_15), + CFG_REGS(ddr_sdram_mode_16), +#endif CFG_REGS(ddr_sdram_interval), CFG_REGS(ddr_data_init), CFG_REGS(ddr_sdram_clk_cntl), @@ -520,6 +593,12 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(ddr_init_ext_addr), CFG_REGS(timing_cfg_4), CFG_REGS(timing_cfg_5), +#ifdef CONFIG_SYS_FSL_DDR4 + CFG_REGS(timing_cfg_6), + CFG_REGS(timing_cfg_7), + CFG_REGS(timing_cfg_8), + CFG_REGS(timing_cfg_9), +#endif CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), CFG_REGS(ddr_wrlvl_cntl_2), @@ -529,6 +608,10 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(ddr_sdram_rcw_2), CFG_REGS(ddr_cdr1), CFG_REGS(ddr_cdr2), + CFG_REGS(dq_map_0), + CFG_REGS(dq_map_1), + CFG_REGS(dq_map_2), + CFG_REGS(dq_map_3), CFG_REGS(err_disable), CFG_REGS(err_int_en), CFG_REGS(ddr_eor), @@ -574,6 +657,7 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(timing_cfg_2), CFG_REGS(ddr_sdram_cfg), CFG_REGS(ddr_sdram_cfg_2), + CFG_REGS(ddr_sdram_cfg_3), CFG_REGS(ddr_sdram_mode), CFG_REGS(ddr_sdram_mode_2), CFG_REGS(ddr_sdram_mode_3), @@ -582,6 +666,16 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(ddr_sdram_mode_6), CFG_REGS(ddr_sdram_mode_7), CFG_REGS(ddr_sdram_mode_8), +#ifdef CONFIG_SYS_FSL_DDR4 + CFG_REGS(ddr_sdram_mode_9), + CFG_REGS(ddr_sdram_mode_10), + CFG_REGS(ddr_sdram_mode_11), + CFG_REGS(ddr_sdram_mode_12), + CFG_REGS(ddr_sdram_mode_13), + CFG_REGS(ddr_sdram_mode_14), + CFG_REGS(ddr_sdram_mode_15), + CFG_REGS(ddr_sdram_mode_16), +#endif CFG_REGS(ddr_sdram_interval), CFG_REGS(ddr_data_init), CFG_REGS(ddr_sdram_clk_cntl), @@ -589,6 +683,12 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(ddr_init_ext_addr), CFG_REGS(timing_cfg_4), CFG_REGS(timing_cfg_5), +#ifdef CONFIG_SYS_FSL_DDR4 + CFG_REGS(timing_cfg_6), + CFG_REGS(timing_cfg_7), + CFG_REGS(timing_cfg_8), + CFG_REGS(timing_cfg_9), +#endif CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), CFG_REGS(ddr_wrlvl_cntl_2), @@ -598,6 +698,10 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(ddr_sdram_rcw_2), CFG_REGS(ddr_cdr1), CFG_REGS(ddr_cdr2), + CFG_REGS(dq_map_0), + CFG_REGS(dq_map_1), + CFG_REGS(dq_map_2), + CFG_REGS(dq_map_3), CFG_REGS(err_disable), CFG_REGS(err_int_en), CFG_REGS(ddr_sdram_rcw_2), @@ -705,6 +809,9 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(tfaw_window_four_activates_ps), CTRL_OPTIONS(trwt_override), CTRL_OPTIONS(trwt), + CTRL_OPTIONS(rtt_override), + CTRL_OPTIONS(rtt_override_value), + CTRL_OPTIONS(rtt_wr_override_value), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -1245,6 +1352,266 @@ void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd) } #endif +#ifdef CONFIG_SYS_FSL_DDR4 +void ddr4_spd_dump(const struct ddr4_spd_eeprom_s *spd) +{ + unsigned int i; + + /* General Section: Bytes 0-127 */ + +#define PRINT_NXS(x, y, z...) printf("%-3d : %02x " z "\n", x, (u8)y); +#define PRINT_NNXXS(n0, n1, x0, x1, s) \ + printf("%-3d-%3d: %02x %02x " s "\n", n0, n1, x0, x1); + + PRINT_NXS(0, spd->info_size_crc, + "info_size_crc bytes written into serial memory, CRC coverage"); + PRINT_NXS(1, spd->spd_rev, + "spd_rev SPD Revision"); + PRINT_NXS(2, spd->mem_type, + "mem_type Key Byte / DRAM Device Type"); + PRINT_NXS(3, spd->module_type, + "module_type Key Byte / Module Type"); + PRINT_NXS(4, spd->density_banks, + "density_banks SDRAM Density and Banks"); + PRINT_NXS(5, spd->addressing, + "addressing SDRAM Addressing"); + PRINT_NXS(6, spd->package_type, + "package_type Package type"); + PRINT_NXS(7, spd->opt_feature, + "opt_feature Optional features"); + PRINT_NXS(8, spd->thermal_ref, + "thermal_ref Thermal and Refresh options"); + PRINT_NXS(9, spd->oth_opt_features, + "oth_opt_features Other SDRAM optional features"); + PRINT_NXS(10, spd->res_10, + "res_10 Reserved"); + PRINT_NXS(11, spd->module_vdd, + "module_vdd Module Nominal Voltage, VDD"); + PRINT_NXS(12, spd->organization, + "organization Module Organization"); + PRINT_NXS(13, spd->bus_width, + "bus_width Module Memory Bus Width"); + PRINT_NXS(14, spd->therm_sensor, + "therm_sensor Module Thermal Sensor"); + PRINT_NXS(15, spd->ext_type, + "ext_type Extended module type"); + PRINT_NXS(16, spd->res_16, + "res_16 Reserved"); + PRINT_NXS(17, spd->timebases, + "timebases MTb and FTB"); + PRINT_NXS(18, spd->tck_min, + "tck_min tCKAVGmin"); + PRINT_NXS(19, spd->tck_max, + "tck_max TCKAVGmax"); + PRINT_NXS(20, spd->caslat_b1, + "caslat_b1 CAS latencies, 1st byte"); + PRINT_NXS(21, spd->caslat_b2, + "caslat_b2 CAS latencies, 2nd byte"); + PRINT_NXS(22, spd->caslat_b3, + "caslat_b3 CAS latencies, 3rd byte "); + PRINT_NXS(23, spd->caslat_b4, + "caslat_b4 CAS latencies, 4th byte"); + PRINT_NXS(24, spd->taa_min, + "taa_min Min CAS Latency Time"); + PRINT_NXS(25, spd->trcd_min, + "trcd_min Min RAS# to CAS# Delay Time"); + PRINT_NXS(26, spd->trp_min, + "trp_min Min Row Precharge Delay Time"); + PRINT_NXS(27, spd->tras_trc_ext, + "tras_trc_ext Upper Nibbles for tRAS and tRC"); + PRINT_NXS(28, spd->tras_min_lsb, + "tras_min_lsb tRASmin, lsb"); + PRINT_NXS(29, spd->trc_min_lsb, + "trc_min_lsb tRCmin, lsb"); + PRINT_NXS(30, spd->trfc1_min_lsb, + "trfc1_min_lsb Min Refresh Recovery Delay Time, LSB"); + PRINT_NXS(31, spd->trfc1_min_msb, + "trfc1_min_msb Min Refresh Recovery Delay Time, MSB "); + PRINT_NXS(32, spd->trfc2_min_lsb, + "trfc2_min_lsb Min Refresh Recovery Delay Time, LSB"); + PRINT_NXS(33, spd->trfc2_min_msb, + "trfc2_min_msb Min Refresh Recovery Delay Time, MSB"); + PRINT_NXS(34, spd->trfc4_min_lsb, + "trfc4_min_lsb Min Refresh Recovery Delay Time, LSB"); + PRINT_NXS(35, spd->trfc4_min_msb, + "trfc4_min_msb Min Refresh Recovery Delay Time, MSB"); + PRINT_NXS(36, spd->tfaw_msb, + "tfaw_msb Upper Nibble for tFAW"); + PRINT_NXS(37, spd->tfaw_min, + "tfaw_min tFAW, lsb"); + PRINT_NXS(38, spd->trrds_min, + "trrds_min tRRD_Smin, MTB"); + PRINT_NXS(39, spd->trrdl_min, + "trrdl_min tRRD_Lmin, MTB"); + PRINT_NXS(40, spd->tccdl_min, + "tccdl_min tCCS_Lmin, MTB"); + + printf("%-3d-%3d: ", 41, 59); /* Reserved, General Section */ + for (i = 41; i <= 59; i++) + printf("%02x ", spd->res_41[i - 41]); + + puts("\n"); + printf("%-3d-%3d: ", 60, 77); + for (i = 60; i <= 77; i++) + printf("%02x ", spd->mapping[i - 60]); + puts(" mapping[] Connector to SDRAM bit map\n"); + + PRINT_NXS(117, spd->fine_tccdl_min, + "fine_tccdl_min Fine offset for tCCD_Lmin"); + PRINT_NXS(118, spd->fine_trrdl_min, + "fine_trrdl_min Fine offset for tRRD_Lmin"); + PRINT_NXS(119, spd->fine_trrds_min, + "fine_trrds_min Fine offset for tRRD_Smin"); + PRINT_NXS(120, spd->fine_trc_min, + "fine_trc_min Fine offset for tRCmin"); + PRINT_NXS(121, spd->fine_trp_min, + "fine_trp_min Fine offset for tRPmin"); + PRINT_NXS(122, spd->fine_trcd_min, + "fine_trcd_min Fine offset for tRCDmin"); + PRINT_NXS(123, spd->fine_taa_min, + "fine_taa_min Fine offset for tAAmin"); + PRINT_NXS(124, spd->fine_tck_max, + "fine_tck_max Fine offset for tCKAVGmax"); + PRINT_NXS(125, spd->fine_tck_min, + "fine_tck_min Fine offset for tCKAVGmin"); + + /* CRC: Bytes 126-127 */ + PRINT_NNXXS(126, 127, spd->crc[0], spd->crc[1], " SPD CRC"); + + switch (spd->module_type) { + case 0x02: /* UDIMM */ + case 0x03: /* SO-DIMM */ + PRINT_NXS(128, spd->mod_section.unbuffered.mod_height, + "mod_height (Unbuffered) Module Nominal Height"); + PRINT_NXS(129, spd->mod_section.unbuffered.mod_thickness, + "mod_thickness (Unbuffered) Module Maximum Thickness"); + PRINT_NXS(130, spd->mod_section.unbuffered.ref_raw_card, + "ref_raw_card (Unbuffered) Reference Raw Card Used"); + PRINT_NXS(131, spd->mod_section.unbuffered.addr_mapping, + "addr_mapping (Unbuffered) Address mapping from Edge Connector to DRAM"); + PRINT_NNXXS(254, 255, spd->mod_section.unbuffered.crc[0], + spd->mod_section.unbuffered.crc[1], " Module CRC"); + break; + case 0x01: /* RDIMM */ + PRINT_NXS(128, spd->mod_section.registered.mod_height, + "mod_height (Registered) Module Nominal Height"); + PRINT_NXS(129, spd->mod_section.registered.mod_thickness, + "mod_thickness (Registered) Module Maximum Thickness"); + PRINT_NXS(130, spd->mod_section.registered.ref_raw_card, + "ref_raw_card (Registered) Reference Raw Card Used"); + PRINT_NXS(131, spd->mod_section.registered.modu_attr, + "modu_attr (Registered) DIMM Module Attributes"); + PRINT_NXS(132, spd->mod_section.registered.thermal, + "thermal (Registered) Thermal Heat Spreader Solution"); + PRINT_NXS(133, spd->mod_section.registered.reg_id_lo, + "reg_id_lo (Registered) Register Manufacturer ID Code, LSB"); + PRINT_NXS(134, spd->mod_section.registered.reg_id_hi, + "reg_id_hi (Registered) Register Manufacturer ID Code, MSB"); + PRINT_NXS(135, spd->mod_section.registered.reg_rev, + "reg_rev (Registered) Register Revision Number"); + PRINT_NXS(136, spd->mod_section.registered.reg_map, + "reg_map (Registered) Address mapping"); + PRINT_NNXXS(254, 255, spd->mod_section.registered.crc[0], + spd->mod_section.registered.crc[1], " Module CRC"); + break; + case 0x04: /* LRDIMM */ + PRINT_NXS(128, spd->mod_section.loadreduced.mod_height, + "mod_height (Loadreduced) Module Nominal Height"); + PRINT_NXS(129, spd->mod_section.loadreduced.mod_thickness, + "mod_thickness (Loadreduced) Module Maximum Thickness"); + PRINT_NXS(130, spd->mod_section.loadreduced.ref_raw_card, + "ref_raw_card (Loadreduced) Reference Raw Card Used"); + PRINT_NXS(131, spd->mod_section.loadreduced.modu_attr, + "modu_attr (Loadreduced) DIMM Module Attributes"); + PRINT_NXS(132, spd->mod_section.loadreduced.thermal, + "thermal (Loadreduced) Thermal Heat Spreader Solution"); + PRINT_NXS(133, spd->mod_section.loadreduced.reg_id_lo, + "reg_id_lo (Loadreduced) Register Manufacturer ID Code, LSB"); + PRINT_NXS(134, spd->mod_section.loadreduced.reg_id_hi, + "reg_id_hi (Loadreduced) Register Manufacturer ID Code, MSB"); + PRINT_NXS(135, spd->mod_section.loadreduced.reg_rev, + "reg_rev (Loadreduced) Register Revision Number"); + PRINT_NXS(136, spd->mod_section.loadreduced.reg_map, + "reg_map (Loadreduced) Address mapping"); + PRINT_NXS(137, spd->mod_section.loadreduced.reg_drv, + "reg_drv (Loadreduced) Reg output drive strength"); + PRINT_NXS(138, spd->mod_section.loadreduced.reg_drv_ck, + "reg_drv_ck (Loadreduced) Reg output drive strength for CK"); + PRINT_NXS(139, spd->mod_section.loadreduced.data_buf_rev, + "data_buf_rev (Loadreduced) Data Buffer Revision Numbe"); + PRINT_NXS(140, spd->mod_section.loadreduced.vrefqe_r0, + "vrefqe_r0 (Loadreduced) DRAM VrefDQ for Package Rank 0"); + PRINT_NXS(141, spd->mod_section.loadreduced.vrefqe_r1, + "vrefqe_r1 (Loadreduced) DRAM VrefDQ for Package Rank 1"); + PRINT_NXS(142, spd->mod_section.loadreduced.vrefqe_r2, + "vrefqe_r2 (Loadreduced) DRAM VrefDQ for Package Rank 2"); + PRINT_NXS(143, spd->mod_section.loadreduced.vrefqe_r3, + "vrefqe_r3 (Loadreduced) DRAM VrefDQ for Package Rank 3"); + PRINT_NXS(144, spd->mod_section.loadreduced.data_intf, + "data_intf (Loadreduced) Data Buffer VrefDQ for DRAM Interface"); + PRINT_NXS(145, spd->mod_section.loadreduced.data_drv_1866, + "data_drv_1866 (Loadreduced) Data Buffer MDQ Drive Strength and RTT"); + PRINT_NXS(146, spd->mod_section.loadreduced.data_drv_2400, + "data_drv_2400 (Loadreduced) Data Buffer MDQ Drive Strength and RTT"); + PRINT_NXS(147, spd->mod_section.loadreduced.data_drv_3200, + "data_drv_3200 (Loadreduced) Data Buffer MDQ Drive Strength and RTT"); + PRINT_NXS(148, spd->mod_section.loadreduced.dram_drv, + "dram_drv (Loadreduced) DRAM Drive Strength"); + PRINT_NXS(149, spd->mod_section.loadreduced.dram_odt_1866, + "dram_odt_1866 (Loadreduced) DRAM ODT (RTT_WR, RTT_NOM)"); + PRINT_NXS(150, spd->mod_section.loadreduced.dram_odt_2400, + "dram_odt_2400 (Loadreduced) DRAM ODT (RTT_WR, RTT_NOM)"); + PRINT_NXS(151, spd->mod_section.loadreduced.dram_odt_3200, + "dram_odt_3200 (Loadreduced) DRAM ODT (RTT_WR, RTT_NOM)"); + PRINT_NXS(152, spd->mod_section.loadreduced.dram_odt_park_1866, + "dram_odt_park_1866 (Loadreduced) DRAM ODT (RTT_PARK)"); + PRINT_NXS(153, spd->mod_section.loadreduced.dram_odt_park_2400, + "dram_odt_park_2400 (Loadreduced) DRAM ODT (RTT_PARK)"); + PRINT_NXS(154, spd->mod_section.loadreduced.dram_odt_park_3200, + "dram_odt_park_3200 (Loadreduced) DRAM ODT (RTT_PARK)"); + PRINT_NNXXS(254, 255, spd->mod_section.loadreduced.crc[0], + spd->mod_section.loadreduced.crc[1], + " Module CRC"); + break; + default: + /* Module-specific Section, Unsupported Module Type */ + printf("%-3d-%3d: ", 128, 255); + + for (i = 128; i <= 255; i++) + printf("%02x", spd->mod_section.uc[i - 60]); + + break; + } + + /* Unique Module ID: Bytes 320-383 */ + PRINT_NXS(320, spd->mmid_lsb, "Module MfgID Code LSB - JEP-106"); + PRINT_NXS(321, spd->mmid_msb, "Module MfgID Code MSB - JEP-106"); + PRINT_NXS(322, spd->mloc, "Mfg Location"); + PRINT_NNXXS(323, 324, spd->mdate[0], spd->mdate[1], "Mfg Date"); + + printf("%-3d-%3d: ", 325, 328); + + for (i = 325; i <= 328; i++) + printf("%02x ", spd->sernum[i - 325]); + printf(" Module Serial Number\n"); + + printf("%-3d-%3d: ", 329, 348); + for (i = 329; i <= 348; i++) + printf("%02x ", spd->mpart[i - 329]); + printf(" Mfg's Module Part Number\n"); + + PRINT_NXS(349, spd->mrev, "Module Revision code"); + PRINT_NXS(350, spd->dmid_lsb, "DRAM MfgID Code LSB - JEP-106"); + PRINT_NXS(351, spd->dmid_msb, "DRAM MfgID Code MSB - JEP-106"); + PRINT_NXS(352, spd->stepping, "DRAM stepping"); + + printf("%-3d-%3d: ", 353, 381); + for (i = 353; i <= 381; i++) + printf("%02x ", spd->msd[i - 353]); + printf(" Mfg's Specific Data\n"); +} +#endif + static inline void generic_spd_dump(const generic_spd_eeprom_t *spd) { #if defined(CONFIG_SYS_FSL_DDR1) @@ -1253,6 +1620,8 @@ static inline void generic_spd_dump(const generic_spd_eeprom_t *spd) ddr2_spd_dump(spd); #elif defined(CONFIG_SYS_FSL_DDR3) ddr3_spd_dump(spd); +#elif defined(CONFIG_SYS_FSL_DDR4) + ddr4_spd_dump(spd); #endif } diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index 610318ad1e7..05a24dd6efd 100644 --- a/drivers/ddr/fsl/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Copyright 2008-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -11,20 +11,23 @@ #include <fsl_ddr.h> -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) static unsigned int -compute_cas_latency_ddr3(const dimm_params_t *dimm_params, - common_timing_params_t *outpdimm, - unsigned int number_of_dimms) +compute_cas_latency(const dimm_params_t *dimm_params, + common_timing_params_t *outpdimm, + unsigned int number_of_dimms) { unsigned int i; - unsigned int taamin_ps = 0; - unsigned int tckmin_x_ps = 0; unsigned int common_caslat; unsigned int caslat_actual; unsigned int retry = 16; unsigned int tmp; const unsigned int mclk_ps = get_memory_clk_period_ps(); +#ifdef CONFIG_SYS_FSL_DDR3 + const unsigned int taamax = 20000; +#else + const unsigned int taamax = 18000; +#endif /* compute the common CAS latency supported between slots */ tmp = dimm_params[0].caslat_x; @@ -34,19 +37,20 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, } common_caslat = tmp; - /* compute the max tAAmin tCKmin between slots */ - for (i = 0; i < number_of_dimms; i++) { - taamin_ps = max(taamin_ps, dimm_params[i].taa_ps); - tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps); - } /* validate if the memory clk is in the range of dimms */ - if (mclk_ps < tckmin_x_ps) { + if (mclk_ps < outpdimm->tckmin_x_ps) { printf("DDR clock (MCLK cycle %u ps) is faster than " "the slowest DIMM(s) (tCKmin %u ps) can support.\n", - mclk_ps, tckmin_x_ps); + mclk_ps, outpdimm->tckmin_x_ps); + } +#ifdef CONFIG_SYS_FSL_DDR4 + if (mclk_ps > outpdimm->tckmax_ps) { + printf("DDR clock (MCLK cycle %u ps) is slower than DIMM(s) (tCKmax %u ps) can support.\n", + mclk_ps, outpdimm->tckmax_ps); } +#endif /* determine the acutal cas latency */ - caslat_actual = (taamin_ps + mclk_ps - 1) / mclk_ps; + caslat_actual = (outpdimm->taamin_ps + mclk_ps - 1) / mclk_ps; /* check if the dimms support the CAS latency */ while (!(common_caslat & (1 << caslat_actual)) && retry > 0) { caslat_actual++; @@ -54,13 +58,147 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, } /* once the caculation of caslat_actual is completed * we must verify that this CAS latency value does not - * exceed tAAmax, which is 20 ns for all DDR3 speed grades + * exceed tAAmax, which is 20 ns for all DDR3 speed grades, + * 18ns for all DDR4 speed grades. */ - if (caslat_actual * mclk_ps > 20000) { + if (caslat_actual * mclk_ps > taamax) { printf("The choosen cas latency %d is too large\n", caslat_actual); } - outpdimm->lowest_common_SPD_caslat = caslat_actual; + outpdimm->lowest_common_spd_caslat = caslat_actual; + debug("lowest_common_spd_caslat is 0x%x\n", caslat_actual); + + return 0; +} +#else /* for DDR1 and DDR2 */ +static unsigned int +compute_cas_latency(const dimm_params_t *dimm_params, + common_timing_params_t *outpdimm, + unsigned int number_of_dimms) +{ + int i; + const unsigned int mclk_ps = get_memory_clk_period_ps(); + unsigned int lowest_good_caslat; + unsigned int not_ok; + unsigned int temp1, temp2; + + debug("using mclk_ps = %u\n", mclk_ps); + if (mclk_ps > outpdimm->tckmax_ps) { + printf("Warning: DDR clock (%u ps) is slower than DIMM(s) (tCKmax %u ps)\n", + mclk_ps, outpdimm->tckmax_ps); + } + + /* + * Compute a CAS latency suitable for all DIMMs + * + * Strategy for SPD-defined latencies: compute only + * CAS latency defined by all DIMMs. + */ + + /* + * Step 1: find CAS latency common to all DIMMs using bitwise + * operation. + */ + temp1 = 0xFF; + for (i = 0; i < number_of_dimms; i++) { + if (dimm_params[i].n_ranks) { + temp2 = 0; + temp2 |= 1 << dimm_params[i].caslat_x; + temp2 |= 1 << dimm_params[i].caslat_x_minus_1; + temp2 |= 1 << dimm_params[i].caslat_x_minus_2; + /* + * If there was no entry for X-2 (X-1) in + * the SPD, then caslat_x_minus_2 + * (caslat_x_minus_1) contains either 255 or + * 0xFFFFFFFF because that's what the glorious + * __ilog2 function returns for an input of 0. + * On 32-bit PowerPC, left shift counts with bit + * 26 set (that the value of 255 or 0xFFFFFFFF + * will have), cause the destination register to + * be 0. That is why this works. + */ + temp1 &= temp2; + } + } + + /* + * Step 2: check each common CAS latency against tCK of each + * DIMM's SPD. + */ + lowest_good_caslat = 0; + temp2 = 0; + while (temp1) { + not_ok = 0; + temp2 = __ilog2(temp1); + debug("checking common caslat = %u\n", temp2); + + /* Check if this CAS latency will work on all DIMMs at tCK. */ + for (i = 0; i < number_of_dimms; i++) { + if (!dimm_params[i].n_ranks) + continue; + + if (dimm_params[i].caslat_x == temp2) { + if (mclk_ps >= dimm_params[i].tckmin_x_ps) { + debug("CL = %u ok on DIMM %u at tCK=%u ps with tCKmin_X_ps of %u\n", + temp2, i, mclk_ps, + dimm_params[i].tckmin_x_ps); + continue; + } else { + not_ok++; + } + } + + if (dimm_params[i].caslat_x_minus_1 == temp2) { + unsigned int tckmin_x_minus_1_ps + = dimm_params[i].tckmin_x_minus_1_ps; + if (mclk_ps >= tckmin_x_minus_1_ps) { + debug("CL = %u ok on DIMM %u at tCK=%u ps with tckmin_x_minus_1_ps of %u\n", + temp2, i, mclk_ps, + tckmin_x_minus_1_ps); + continue; + } else { + not_ok++; + } + } + + if (dimm_params[i].caslat_x_minus_2 == temp2) { + unsigned int tckmin_x_minus_2_ps + = dimm_params[i].tckmin_x_minus_2_ps; + if (mclk_ps >= tckmin_x_minus_2_ps) { + debug("CL = %u ok on DIMM %u at tCK=%u ps with tckmin_x_minus_2_ps of %u\n", + temp2, i, mclk_ps, + tckmin_x_minus_2_ps); + continue; + } else { + not_ok++; + } + } + } + + if (!not_ok) + lowest_good_caslat = temp2; + + temp1 &= ~(1 << temp2); + } + + debug("lowest common SPD-defined CAS latency = %u\n", + lowest_good_caslat); + outpdimm->lowest_common_spd_caslat = lowest_good_caslat; + + + /* + * Compute a common 'de-rated' CAS latency. + * + * The strategy here is to find the *highest* dereated cas latency + * with the assumption that all of the DIMMs will support a dereated + * CAS latency higher than or equal to their lowest dereated value. + */ + temp1 = 0; + for (i = 0; i < number_of_dimms; i++) + temp1 = max(temp1, dimm_params[i].caslat_lowest_derated); + + outpdimm->highest_common_derated_caslat = temp1; + debug("highest common dereated CAS latency = %u\n", temp1); return 0; } @@ -82,34 +220,40 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, unsigned int tckmin_x_ps = 0; unsigned int tckmax_ps = 0xFFFFFFFF; - unsigned int tckmax_max_ps = 0; unsigned int trcd_ps = 0; unsigned int trp_ps = 0; unsigned int tras_ps = 0; +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) + unsigned int taamin_ps = 0; +#endif +#ifdef CONFIG_SYS_FSL_DDR4 + unsigned int twr_ps = 15000; + unsigned int trfc1_ps = 0; + unsigned int trfc2_ps = 0; + unsigned int trfc4_ps = 0; + unsigned int trrds_ps = 0; + unsigned int trrdl_ps = 0; + unsigned int tccdl_ps = 0; +#else unsigned int twr_ps = 0; unsigned int twtr_ps = 0; unsigned int trfc_ps = 0; unsigned int trrd_ps = 0; + unsigned int trtp_ps = 0; +#endif unsigned int trc_ps = 0; unsigned int refresh_rate_ps = 0; unsigned int extended_op_srt = 1; +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) unsigned int tis_ps = 0; unsigned int tih_ps = 0; unsigned int tds_ps = 0; unsigned int tdh_ps = 0; - unsigned int trtp_ps = 0; unsigned int tdqsq_max_ps = 0; unsigned int tqhs_ps = 0; - +#endif unsigned int temp1, temp2; unsigned int additive_latency = 0; -#if !defined(CONFIG_SYS_FSL_DDR3) - const unsigned int mclk_ps = get_memory_clk_period_ps(); - unsigned int lowest_good_caslat; - unsigned int not_ok; - - debug("using mclk_ps = %u\n", mclk_ps); -#endif temp1 = 0; for (i = 0; i < number_of_dimms; i++) { @@ -146,31 +290,34 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, * i.e., this is the slowest the whole system can go. */ tckmax_ps = min(tckmax_ps, dimm_params[i].tckmax_ps); - - /* Either find maximum value to determine slowest - * speed, delay, time, period, etc */ +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) + taamin_ps = max(taamin_ps, dimm_params[i].taa_ps); +#endif tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps); - tckmax_max_ps = max(tckmax_max_ps, dimm_params[i].tckmax_ps); trcd_ps = max(trcd_ps, dimm_params[i].trcd_ps); trp_ps = max(trp_ps, dimm_params[i].trp_ps); tras_ps = max(tras_ps, dimm_params[i].tras_ps); +#ifdef CONFIG_SYS_FSL_DDR4 + trfc1_ps = max(trfc1_ps, dimm_params[i].trfc1_ps); + trfc2_ps = max(trfc2_ps, dimm_params[i].trfc2_ps); + trfc4_ps = max(trfc4_ps, dimm_params[i].trfc4_ps); + trrds_ps = max(trrds_ps, dimm_params[i].trrds_ps); + trrdl_ps = max(trrdl_ps, dimm_params[i].trrdl_ps); + tccdl_ps = max(tccdl_ps, dimm_params[i].tccdl_ps); +#else twr_ps = max(twr_ps, dimm_params[i].twr_ps); twtr_ps = max(twtr_ps, dimm_params[i].twtr_ps); trfc_ps = max(trfc_ps, dimm_params[i].trfc_ps); trrd_ps = max(trrd_ps, dimm_params[i].trrd_ps); + trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps); +#endif trc_ps = max(trc_ps, dimm_params[i].trc_ps); +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) tis_ps = max(tis_ps, dimm_params[i].tis_ps); tih_ps = max(tih_ps, dimm_params[i].tih_ps); tds_ps = max(tds_ps, dimm_params[i].tds_ps); tdh_ps = max(tdh_ps, dimm_params[i].tdh_ps); - trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps); tqhs_ps = max(tqhs_ps, dimm_params[i].tqhs_ps); - refresh_rate_ps = max(refresh_rate_ps, - dimm_params[i].refresh_rate_ps); - /* extended_op_srt is either 0 or 1, 0 having priority */ - extended_op_srt = min(extended_op_srt, - dimm_params[i].extended_op_srt); - /* * Find maximum tdqsq_max_ps to find slowest. * @@ -178,6 +325,12 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, * strategy for this parameter? */ tdqsq_max_ps = max(tdqsq_max_ps, dimm_params[i].tdqsq_max_ps); +#endif + refresh_rate_ps = max(refresh_rate_ps, + dimm_params[i].refresh_rate_ps); + /* extended_op_srt is either 0 or 1, 0 having priority */ + extended_op_srt = min(extended_op_srt, + dimm_params[i].extended_op_srt); } outpdimm->ndimms_present = number_of_dimms - temp1; @@ -189,24 +342,37 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, outpdimm->tckmin_x_ps = tckmin_x_ps; outpdimm->tckmax_ps = tckmax_ps; - outpdimm->tckmax_max_ps = tckmax_max_ps; +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) + outpdimm->taamin_ps = taamin_ps; +#endif outpdimm->trcd_ps = trcd_ps; outpdimm->trp_ps = trp_ps; outpdimm->tras_ps = tras_ps; - outpdimm->twr_ps = twr_ps; +#ifdef CONFIG_SYS_FSL_DDR4 + outpdimm->trfc1_ps = trfc1_ps; + outpdimm->trfc2_ps = trfc2_ps; + outpdimm->trfc4_ps = trfc4_ps; + outpdimm->trrds_ps = trrds_ps; + outpdimm->trrdl_ps = trrdl_ps; + outpdimm->tccdl_ps = tccdl_ps; +#else outpdimm->twtr_ps = twtr_ps; outpdimm->trfc_ps = trfc_ps; outpdimm->trrd_ps = trrd_ps; + outpdimm->trtp_ps = trtp_ps; +#endif + outpdimm->twr_ps = twr_ps; outpdimm->trc_ps = trc_ps; outpdimm->refresh_rate_ps = refresh_rate_ps; outpdimm->extended_op_srt = extended_op_srt; +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) outpdimm->tis_ps = tis_ps; outpdimm->tih_ps = tih_ps; outpdimm->tds_ps = tds_ps; outpdimm->tdh_ps = tdh_ps; - outpdimm->trtp_ps = trtp_ps; outpdimm->tdqsq_max_ps = tdqsq_max_ps; outpdimm->tqhs_ps = tqhs_ps; +#endif /* Determine common burst length for all DIMMs. */ temp1 = 0xff; @@ -265,128 +431,9 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (temp1 != 0) printf("ERROR: Mix different RDIMM detected!\n"); -#if defined(CONFIG_SYS_FSL_DDR3) - if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms)) + /* calculate cas latency for all DDR types */ + if (compute_cas_latency(dimm_params, outpdimm, number_of_dimms)) return 1; -#else - /* - * Compute a CAS latency suitable for all DIMMs - * - * Strategy for SPD-defined latencies: compute only - * CAS latency defined by all DIMMs. - */ - - /* - * Step 1: find CAS latency common to all DIMMs using bitwise - * operation. - */ - temp1 = 0xFF; - for (i = 0; i < number_of_dimms; i++) { - if (dimm_params[i].n_ranks) { - temp2 = 0; - temp2 |= 1 << dimm_params[i].caslat_x; - temp2 |= 1 << dimm_params[i].caslat_x_minus_1; - temp2 |= 1 << dimm_params[i].caslat_x_minus_2; - /* - * FIXME: If there was no entry for X-2 (X-1) in - * the SPD, then caslat_x_minus_2 - * (caslat_x_minus_1) contains either 255 or - * 0xFFFFFFFF because that's what the glorious - * __ilog2 function returns for an input of 0. - * On 32-bit PowerPC, left shift counts with bit - * 26 set (that the value of 255 or 0xFFFFFFFF - * will have), cause the destination register to - * be 0. That is why this works. - */ - temp1 &= temp2; - } - } - - /* - * Step 2: check each common CAS latency against tCK of each - * DIMM's SPD. - */ - lowest_good_caslat = 0; - temp2 = 0; - while (temp1) { - not_ok = 0; - temp2 = __ilog2(temp1); - debug("checking common caslat = %u\n", temp2); - - /* Check if this CAS latency will work on all DIMMs at tCK. */ - for (i = 0; i < number_of_dimms; i++) { - if (!dimm_params[i].n_ranks) { - continue; - } - if (dimm_params[i].caslat_x == temp2) { - if (mclk_ps >= dimm_params[i].tckmin_x_ps) { - debug("CL = %u ok on DIMM %u at tCK=%u" - " ps with its tCKmin_X_ps of %u\n", - temp2, i, mclk_ps, - dimm_params[i].tckmin_x_ps); - continue; - } else { - not_ok++; - } - } - - if (dimm_params[i].caslat_x_minus_1 == temp2) { - unsigned int tckmin_x_minus_1_ps - = dimm_params[i].tckmin_x_minus_1_ps; - if (mclk_ps >= tckmin_x_minus_1_ps) { - debug("CL = %u ok on DIMM %u at " - "tCK=%u ps with its " - "tckmin_x_minus_1_ps of %u\n", - temp2, i, mclk_ps, - tckmin_x_minus_1_ps); - continue; - } else { - not_ok++; - } - } - - if (dimm_params[i].caslat_x_minus_2 == temp2) { - unsigned int tckmin_x_minus_2_ps - = dimm_params[i].tckmin_x_minus_2_ps; - if (mclk_ps >= tckmin_x_minus_2_ps) { - debug("CL = %u ok on DIMM %u at " - "tCK=%u ps with its " - "tckmin_x_minus_2_ps of %u\n", - temp2, i, mclk_ps, - tckmin_x_minus_2_ps); - continue; - } else { - not_ok++; - } - } - } - - if (!not_ok) { - lowest_good_caslat = temp2; - } - - temp1 &= ~(1 << temp2); - } - - debug("lowest common SPD-defined CAS latency = %u\n", - lowest_good_caslat); - outpdimm->lowest_common_SPD_caslat = lowest_good_caslat; - - - /* - * Compute a common 'de-rated' CAS latency. - * - * The strategy here is to find the *highest* dereated cas latency - * with the assumption that all of the DIMMs will support a dereated - * CAS latency higher than or equal to their lowest dereated value. - */ - temp1 = 0; - for (i = 0; i < number_of_dimms; i++) { - temp1 = max(temp1, dimm_params[i].caslat_lowest_derated); - } - outpdimm->highest_common_derated_caslat = temp1; - debug("highest common dereated CAS latency = %u\n", temp1); -#endif /* #if defined(CONFIG_SYS_FSL_DDR3) */ /* Determine if all DIMMs ECC capable. */ temp1 = 1; @@ -404,14 +451,6 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } outpdimm->all_dimms_ecc_capable = temp1; -#ifndef CONFIG_SYS_FSL_DDR3 - /* FIXME: move to somewhere else to validate. */ - if (mclk_ps > tckmax_max_ps) { - printf("Warning: some of the installed DIMMs " - "can not operate this slowly.\n"); - return 1; - } -#endif /* * Compute additive latency. * @@ -468,27 +507,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, additive_latency = 0; #if defined(CONFIG_SYS_FSL_DDR2) - if (lowest_good_caslat < 4) { - additive_latency = (picos_to_mclk(trcd_ps) > lowest_good_caslat) - ? picos_to_mclk(trcd_ps) - lowest_good_caslat : 0; + if ((outpdimm->lowest_common_spd_caslat < 4) && + (picos_to_mclk(trcd_ps) > outpdimm->lowest_common_spd_caslat)) { + additive_latency = picos_to_mclk(trcd_ps) - + outpdimm->lowest_common_spd_caslat; if (mclk_to_picos(additive_latency) > trcd_ps) { additive_latency = picos_to_mclk(trcd_ps); debug("setting additive_latency to %u because it was " " greater than tRCD_ps\n", additive_latency); } } - -#elif defined(CONFIG_SYS_FSL_DDR3) - /* - * The system will not use the global auto-precharge mode. - * However, it uses the page mode, so we set AL=0 - */ - additive_latency = 0; #endif /* * Validate additive latency - * FIXME: move to somewhere else to validate * * AL <= tRCD(min) */ @@ -516,10 +548,19 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, debug("trcd_ps = %u\n", outpdimm->trcd_ps); debug("trp_ps = %u\n", outpdimm->trp_ps); debug("tras_ps = %u\n", outpdimm->tras_ps); - debug("twr_ps = %u\n", outpdimm->twr_ps); +#ifdef CONFIG_SYS_FSL_DDR4 + debug("trfc1_ps = %u\n", trfc1_ps); + debug("trfc2_ps = %u\n", trfc2_ps); + debug("trfc4_ps = %u\n", trfc4_ps); + debug("trrds_ps = %u\n", trrds_ps); + debug("trrdl_ps = %u\n", trrdl_ps); + debug("tccdl_ps = %u\n", tccdl_ps); +#else debug("twtr_ps = %u\n", outpdimm->twtr_ps); debug("trfc_ps = %u\n", outpdimm->trfc_ps); debug("trrd_ps = %u\n", outpdimm->trrd_ps); +#endif + debug("twr_ps = %u\n", outpdimm->twr_ps); debug("trc_ps = %u\n", outpdimm->trc_ps); return 0; diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index d62ca63c770..5e001fcb994 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Copyright 2008-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -81,14 +81,37 @@ u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { #endif +#define SPD_SPA0_ADDRESS 0x36 +#define SPD_SPA1_ADDRESS 0x37 + static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) { int ret; +#ifdef CONFIG_SYS_FSL_DDR4 + uint8_t dummy = 0; +#endif i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); +#ifdef CONFIG_SYS_FSL_DDR4 + /* + * DDR4 SPD has 384 to 512 bytes + * To access the lower 256 bytes, we need to set EE page address to 0 + * To access the upper 256 bytes, we need to set EE page address to 1 + * See Jedec standar No. 21-C for detail + */ + i2c_write(SPD_SPA0_ADDRESS, 0, 1, &dummy, 1); + ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, 256); + if (!ret) { + i2c_write(SPD_SPA1_ADDRESS, 0, 1, &dummy, 1); + ret = i2c_read(i2c_address, 0, 1, + (uchar *)((ulong)spd + 256), + min(256, sizeof(generic_spd_eeprom_t) - 256)); + } +#else ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(generic_spd_eeprom_t)); +#endif if (ret) { if (i2c_address == @@ -197,6 +220,11 @@ const char * step_to_string(unsigned int step) { if ((1 << s) != step) return step_string_tbl[7]; + if (s >= ARRAY_SIZE(step_string_tbl)) { + printf("Error for the step in %s\n", __func__); + s = 0; + } + return step_string_tbl[s]; } @@ -497,6 +525,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, /* STEP 5: Assign addresses to chip selects */ check_interleaving_options(pinfo); total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust); + debug("Total mem %llu assigned\n", total_mem); case STEP_COMPUTE_REGS: /* STEP 6: compute controller register values */ diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c index c8050864163..4d5572ef21b 100644 --- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c @@ -15,6 +15,7 @@ #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL #endif +DECLARE_GLOBAL_DATA_PTR; /* * regs has the to-be-set values for DDR controller registers @@ -43,6 +44,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, u32 save1, save2; #endif +#ifdef CONFIG_DEEP_SLEEP + const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + bool sleep_flag = 0; +#endif + +#ifdef CONFIG_DEEP_SLEEP + if (in_be32(&gur->scrtsr[0]) & (1 << 3)) + sleep_flag = 1; +#endif + switch (ctrl_num) { case 0: ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; @@ -119,7 +130,13 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0); out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1); out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2); - out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); +#ifdef CONFIG_DEEP_SLEEP + if (sleep_flag) + out_be32(&ddr->sdram_cfg_2, + regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); + else +#endif + out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3); @@ -132,8 +149,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); out_be32(&ddr->sdram_data_init, regs->ddr_data_init); out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); - out_be32(&ddr->init_addr, regs->ddr_init_addr); - out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); +#ifdef CONFIG_DEEP_SLEEP + if (sleep_flag) { + out_be32(&ddr->init_addr, 0); + out_be32(&ddr->init_ext_addr, (1 << 31)); + } else +#endif + { + out_be32(&ddr->init_addr, regs->ddr_init_addr); + out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); + } out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4); out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); @@ -374,8 +399,22 @@ step2: udelay(500); asm volatile("sync;isync"); +#ifdef CONFIG_DEEP_SLEEP + if (sleep_flag) { + /* enter self-refresh */ + setbits_be32(&ddr->sdram_cfg_2, (1 << 31)); + /* do board specific memory setup */ + board_mem_sleep_setup(); + } +#endif + /* Let the controller go */ - temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; +#ifdef CONFIG_DEEP_SLEEP + if (sleep_flag) + temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI); + else +#endif + temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI); out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); asm volatile("sync;isync"); @@ -526,4 +565,9 @@ step2: clrbits_be32(&ddr->sdram_cfg, 0x2); } #endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */ +#ifdef CONFIG_DEEP_SLEEP + if (sleep_flag) + /* exit self-refresh */ + clrbits_be32(&ddr->sdram_cfg_2, (1 << 31)); +#endif } diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c index b0cf046fdcd..5986e1a0b9d 100644 --- a/drivers/ddr/fsl/options.c +++ b/drivers/ddr/fsl/options.c @@ -1,5 +1,5 @@ /* - * Copyright 2008, 2010-2012 Freescale Semiconductor, Inc. + * Copyright 2008, 2010-2014 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -29,7 +29,7 @@ struct dynamic_odt { unsigned int odt_rtt_wr; }; -#ifdef CONFIG_SYS_FSL_DDR3 +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) static const struct dynamic_odt single_Q[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, @@ -259,7 +259,7 @@ static const struct dynamic_odt odt_unknown[4] = { DDR3_RTT_OFF } }; -#else /* CONFIG_SYS_FSL_DDR3 */ +#else /* CONFIG_SYS_FSL_DDR3 || CONFIG_SYS_FSL_DDR4 */ static const struct dynamic_odt single_Q[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, @@ -507,7 +507,9 @@ unsigned int populate_memctl_options(int all_dimms_registered, unsigned int i; char buffer[HWCONFIG_BUFFER_SIZE]; char *buf = NULL; -#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || \ + defined(CONFIG_SYS_FSL_DDR2) || \ + defined(CONFIG_SYS_FSL_DDR4) const struct dynamic_odt *pdodt = odt_unknown; #endif ulong ddr_freq; @@ -519,73 +521,76 @@ unsigned int populate_memctl_options(int all_dimms_registered, if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; -#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || \ + defined(CONFIG_SYS_FSL_DDR2) || \ + defined(CONFIG_SYS_FSL_DDR4) /* Chip select options. */ - if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { - switch (pdimm[0].n_ranks) { - case 1: - pdodt = single_S; - break; +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) + switch (pdimm[0].n_ranks) { + case 1: + pdodt = single_S; + break; + case 2: + pdodt = single_D; + break; + case 4: + pdodt = single_Q; + break; + } +#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) + switch (pdimm[0].n_ranks) { +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + case 4: + pdodt = single_Q; + if (pdimm[1].n_ranks) + printf("Error: Quad- and Dual-rank DIMMs cannot be used together\n"); + break; +#endif + case 2: + switch (pdimm[1].n_ranks) { case 2: - pdodt = single_D; + pdodt = dual_DD; break; - case 4: - pdodt = single_Q; + case 1: + pdodt = dual_DS; break; - } - } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { - switch (pdimm[0].n_ranks) { -#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE - case 4: - pdodt = single_Q; - if (pdimm[1].n_ranks) - printf("Error: Quad- and Dual-rank DIMMs " - "cannot be used together\n"); + case 0: + pdodt = dual_D0; break; -#endif + } + break; + case 1: + switch (pdimm[1].n_ranks) { case 2: - switch (pdimm[1].n_ranks) { - case 2: - pdodt = dual_DD; - break; - case 1: - pdodt = dual_DS; - break; - case 0: - pdodt = dual_D0; - break; - } + pdodt = dual_SD; break; case 1: - switch (pdimm[1].n_ranks) { - case 2: - pdodt = dual_SD; - break; - case 1: - pdodt = dual_SS; - break; - case 0: - pdodt = dual_S0; - break; - } + pdodt = dual_SS; break; case 0: - switch (pdimm[1].n_ranks) { - case 2: - pdodt = dual_0D; - break; - case 1: - pdodt = dual_0S; - break; - } + pdodt = dual_S0; + break; + } + break; + case 0: + switch (pdimm[1].n_ranks) { + case 2: + pdodt = dual_0D; + break; + case 1: + pdodt = dual_0S; break; } + break; } -#endif +#endif /* CONFIG_DIMM_SLOTS_PER_CTLR */ +#endif /* CONFIG_SYS_FSL_DDR2, 3, 4 */ /* Pick chip-select local options. */ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { -#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || \ + defined(CONFIG_SYS_FSL_DDR2) || \ + defined(CONFIG_SYS_FSL_DDR4) popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg; popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg; popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm; @@ -703,7 +708,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0; /* Choose burst length. */ -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) #if defined(CONFIG_E500MC) popts->otf_burst_chop_en = 0; /* on-the-fly burst chop disable */ popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */ @@ -722,7 +727,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, #endif /* Choose ddr controller address mirror mode */ -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) popts->mirrored_dimm = pdimm[0].mirrored_dimm; #endif @@ -766,11 +771,9 @@ unsigned int populate_memctl_options(int all_dimms_registered, * BSTTOPRE precharge interval * * Set this to 0 for global auto precharge - * - * FIXME: Should this be configured in picoseconds? - * Why it should be in ps: better understanding of this - * relative to actual DRAM timing parameters such as tRAS. - * e.g. tRAS(min) = 40 ns + * The value of 0x100 has been used for DDR1, DDR2, DDR3. + * It is not wrong. Any value should be OK. The performance depends on + * applications. There is no one good value for all. */ popts->bstopre = 0x100; @@ -795,12 +798,12 @@ unsigned int populate_memctl_options(int all_dimms_registered, */ popts->tfaw_window_four_activates_ps = 37500; -#elif defined(CONFIG_SYS_FSL_DDR3) +#else popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps; #endif popts->zq_en = 0; popts->wrlvl_en = 0; -#if defined(CONFIG_SYS_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) /* * due to ddr3 dimm is fly-by topology * we suggest to enable write leveling to @@ -843,8 +846,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, popts->memctl_interleaving_mode = FSL_DDR_256B_INTERLEAVING; popts->memctl_interleaving = 1; debug("256 Byte interleaving\n"); - goto done; -#endif +#else /* * test null first. if CONFIG_HWCONFIG is not defined * hwconfig_arg_cmp returns non-zero @@ -926,8 +928,9 @@ unsigned int populate_memctl_options(int all_dimms_registered, popts->memctl_interleaving = 0; printf("hwconfig has unrecognized parameter for ctlr_intlv.\n"); } +#endif /* CONFIG_SYS_FSL_DDR_INTLV_256B */ done: -#endif +#endif /* CONFIG_NUM_DDR_CONTROLLERS > 1 */ if ((hwconfig_sub_f("fsl_ddr", "bank_intlv", buf)) && (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) { /* test null first. if CONFIG_HWCONFIG is not defined, @@ -1102,10 +1105,11 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) case FSL_DDR_PAGE_INTERLEAVING: case FSL_DDR_BANK_INTERLEAVING: case FSL_DDR_SUPERBANK_INTERLEAVING: - if (3 == CONFIG_NUM_DDR_CONTROLLERS) +#if (3 == CONFIG_NUM_DDR_CONTROLLERS) k = 2; - else +#else k = CONFIG_NUM_DDR_CONTROLLERS; +#endif break; case FSL_DDR_3WAY_1KB_INTERLEAVING: case FSL_DDR_3WAY_4KB_INTERLEAVING: diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c index ad53658fc92..7a22aa39886 100644 --- a/drivers/ddr/fsl/util.c +++ b/drivers/ddr/fsl/util.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Copyright 2008-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -23,6 +23,18 @@ #define ULL_8FS 0xFFFFFFFFULL +u32 fsl_ddr_get_version(void) +{ + struct ccsr_ddr __iomem *ddr; + u32 ver_major_minor_errata; + + ddr = (void *)_DDR_ADDR; + ver_major_minor_errata = (ddr_in32(&ddr->ip_rev1) & 0xFFFF) << 8; + ver_major_minor_errata |= (ddr_in32(&ddr->ip_rev2) & 0xFF00) >> 8; + + return ver_major_minor_errata; +} + /* * Round up mclk_ps to nearest 1 ps in memory controller code * if the error is 0.5ps or more. @@ -175,6 +187,9 @@ void board_add_ram_info(int use_default) case SDRAM_TYPE_DDR3: puts("3"); break; + case SDRAM_TYPE_DDR4: + puts("4"); + break; default: puts("?"); break; @@ -188,9 +203,12 @@ void board_add_ram_info(int use_default) puts(", 64-bit"); /* Calculate CAS latency based on timing cfg values */ - cas_lat = ((ddr_in32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1; - if ((ddr_in32(&ddr->timing_cfg_3) >> 12) & 1) - cas_lat += (8 << 1); + cas_lat = ((ddr_in32(&ddr->timing_cfg_1) >> 16) & 0xf); + if (fsl_ddr_get_version() <= 0x40400) + cas_lat += 1; + else + cas_lat += 2; + cas_lat += ((ddr_in32(&ddr->timing_cfg_3) >> 12) & 3) << 4; printf(", CL=%d", cas_lat >> 1); if (cas_lat & 0x1) puts(".5"); |