diff options
Diffstat (limited to 'drivers/mtd/nand/mxc_nand.c')
| -rw-r--r-- | drivers/mtd/nand/mxc_nand.c | 880 |
1 files changed, 880 insertions, 0 deletions
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c new file mode 100644 index 00000000000..647be0b7ef3 --- /dev/null +++ b/drivers/mtd/nand/mxc_nand.c @@ -0,0 +1,880 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * Copyright 2009 Ilya Yanok, <yanok@emcraft.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <common.h> +#include <nand.h> +#include <linux/err.h> +#include <asm/io.h> +#ifdef CONFIG_MX27 +#include <asm/arch/imx-regs.h> +#endif + +#define DRIVER_NAME "mxc_nand" + +struct nfc_regs { +/* NFC RAM BUFFER Main area 0 */ + uint8_t main_area0[0x200]; + uint8_t main_area1[0x200]; + uint8_t main_area2[0x200]; + uint8_t main_area3[0x200]; +/* SPARE BUFFER Spare area 0 */ + uint8_t spare_area0[0x10]; + uint8_t spare_area1[0x10]; + uint8_t spare_area2[0x10]; + uint8_t spare_area3[0x10]; + uint8_t pad[0x5c0]; +/* NFC registers */ + uint16_t nfc_buf_size; + uint16_t reserved; + uint16_t nfc_buf_addr; + uint16_t nfc_flash_addr; + uint16_t nfc_flash_cmd; + uint16_t nfc_config; + uint16_t nfc_ecc_status_result; + uint16_t nfc_rsltmain_area; + uint16_t nfc_rsltspare_area; + uint16_t nfc_wrprot; + uint16_t nfc_unlockstart_blkaddr; + uint16_t nfc_unlockend_blkaddr; + uint16_t nfc_nf_wrprst; + uint16_t nfc_config1; + uint16_t nfc_config2; +}; + +/* + * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register + * for Command operation + */ +#define NFC_CMD 0x1 + +/* + * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register + * for Address operation + */ +#define NFC_ADDR 0x2 + +/* + * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register + * for Input operation + */ +#define NFC_INPUT 0x4 + +/* + * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register + * for Data Output operation + */ +#define NFC_OUTPUT 0x8 + +/* + * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register + * for Read ID operation + */ +#define NFC_ID 0x10 + +/* + * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register + * for Read Status operation + */ +#define NFC_STATUS 0x20 + +/* + * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read + * Status operation + */ +#define NFC_INT 0x8000 + +#define NFC_SP_EN (1 << 2) +#define NFC_ECC_EN (1 << 3) +#define NFC_BIG (1 << 5) +#define NFC_RST (1 << 6) +#define NFC_CE (1 << 7) +#define NFC_ONE_CYCLE (1 << 8) + +typedef enum {false, true} bool; + +struct mxc_nand_host { + struct mtd_info mtd; + struct nand_chip *nand; + + struct nfc_regs __iomem *regs; + int spare_only; + int status_request; + int pagesize_2k; + int clk_act; + uint16_t col_addr; +}; + +static struct mxc_nand_host mxc_host; +static struct mxc_nand_host *host = &mxc_host; + +/* Define delays in microsec for NAND device operations */ +#define TROP_US_DELAY 2000 +/* Macros to get byte and bit positions of ECC */ +#define COLPOS(x) ((x) >> 3) +#define BITPOS(x) ((x) & 0xf) + +/* Define single bit Error positions in Main & Spare area */ +#define MAIN_SINGLEBIT_ERROR 0x4 +#define SPARE_SINGLEBIT_ERROR 0x1 + +/* OOB placement block for use with hardware ecc generation */ +#ifdef CONFIG_MXC_NAND_HWECC +static struct nand_ecclayout nand_hw_eccoob = { + .eccbytes = 5, + .eccpos = {6, 7, 8, 9, 10}, + .oobfree = {{0, 5}, {11, 5}, } +}; +#else +static struct nand_ecclayout nand_soft_eccoob = { + .eccbytes = 6, + .eccpos = {6, 7, 8, 9, 10, 11}, + .oobfree = {{0, 5}, {12, 4}, } +}; +#endif + +static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size) +{ + uint32_t *d = dest; + + size >>= 2; + while (size--) + __raw_writel(__raw_readl(source++), d++); + return dest; +} + +/* + * This function polls the NANDFC to wait for the basic operation to + * complete by checking the INT bit of config2 register. + */ +static void wait_op_done(struct mxc_nand_host *host, int max_retries, + uint16_t param) +{ + uint32_t tmp; + + while (max_retries-- > 0) { + if (readw(&host->regs->nfc_config2) & NFC_INT) { + tmp = readw(&host->regs->nfc_config2); + tmp &= ~NFC_INT; + writew(tmp, &host->regs->nfc_config2); + break; + } + udelay(1); + } + if (max_retries < 0) { + MTDDEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n", + __func__, param); + } +} + +/* + * This function issues the specified command to the NAND device and + * waits for completion. + */ +static void send_cmd(struct mxc_nand_host *host, uint16_t cmd) +{ + MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd); + + writew(cmd, &host->regs->nfc_flash_cmd); + writew(NFC_CMD, &host->regs->nfc_config2); + + /* Wait for operation to complete */ + wait_op_done(host, TROP_US_DELAY, cmd); +} + +/* + * This function sends an address (or partial address) to the + * NAND device. The address is used to select the source/destination for + * a NAND command. + */ +static void send_addr(struct mxc_nand_host *host, uint16_t addr) +{ + MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr); + + writew(addr, &host->regs->nfc_flash_addr); + writew(NFC_ADDR, &host->regs->nfc_config2); + + /* Wait for operation to complete */ + wait_op_done(host, TROP_US_DELAY, addr); +} + +/* + * This function requests the NANDFC to initate the transfer + * of data currently in the NANDFC RAM buffer to the NAND device. + */ +static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, + int spare_only) +{ + MTDDEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only); + + writew(buf_id, &host->regs->nfc_buf_addr); + + /* Configure spare or page+spare access */ + if (!host->pagesize_2k) { + uint16_t config1 = readw(&host->regs->nfc_config1); + if (spare_only) + config1 |= NFC_SP_EN; + else + config1 &= ~(NFC_SP_EN); + writew(config1, &host->regs->nfc_config1); + } + + writew(NFC_INPUT, &host->regs->nfc_config2); + + /* Wait for operation to complete */ + wait_op_done(host, TROP_US_DELAY, spare_only); +} + +/* + * Requests NANDFC to initated the transfer of data from the + * NAND device into in the NANDFC ram buffer. + */ +static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, + int spare_only) +{ + MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only); + + writew(buf_id, &host->regs->nfc_buf_addr); + + /* Configure spare or page+spare access */ + if (!host->pagesize_2k) { + uint32_t config1 = readw(&host->regs->nfc_config1); + if (spare_only) + config1 |= NFC_SP_EN; + else + config1 &= ~NFC_SP_EN; + writew(config1, &host->regs->nfc_config1); + } + + writew(NFC_OUTPUT, &host->regs->nfc_config2); + + /* Wait for operation to complete */ + wait_op_done(host, TROP_US_DELAY, spare_only); +} + +/* Request the NANDFC to perform a read of the NAND device ID. */ +static void send_read_id(struct mxc_nand_host *host) +{ + uint16_t tmp; + + /* NANDFC buffer 0 is used for device ID output */ + writew(0x0, &host->regs->nfc_buf_addr); + + /* Read ID into main buffer */ + tmp = readw(&host->regs->nfc_config1); + tmp &= ~NFC_SP_EN; + writew(tmp, &host->regs->nfc_config1); + + writew(NFC_ID, &host->regs->nfc_config2); + + /* Wait for operation to complete */ + wait_op_done(host, TROP_US_DELAY, 0); +} + +/* + * This function requests the NANDFC to perform a read of the + * NAND device status and returns the current status. + */ +static uint16_t get_dev_status(struct mxc_nand_host *host) +{ + void __iomem *main_buf = host->regs->main_area1; + uint32_t store; + uint16_t ret, tmp; + /* Issue status request to NAND device */ + + /* store the main area1 first word, later do recovery */ + store = readl(main_buf); + /* NANDFC buffer 1 is used for device status */ + writew(1, &host->regs->nfc_buf_addr); + + /* Read status into main buffer */ + tmp = readw(&host->regs->nfc_config1); + tmp &= ~NFC_SP_EN; + writew(tmp, &host->regs->nfc_config1); + + writew(NFC_STATUS, &host->regs->nfc_config2); + + /* Wait for operation to complete */ + wait_op_done(host, TROP_US_DELAY, 0); + + /* + * Status is placed in first word of main buffer + * get status, then recovery area 1 data + */ + ret = readw(main_buf); + writel(store, main_buf); + + return ret; +} + +/* This function is used by upper layer to checks if device is ready */ +static int mxc_nand_dev_ready(struct mtd_info *mtd) +{ + /* + * NFC handles R/B internally. Therefore, this function + * always returns status as ready. + */ + return 1; +} + +#ifdef CONFIG_MXC_NAND_HWECC +static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode) +{ + /* + * If HW ECC is enabled, we turn it on during init. There is + * no need to enable again here. + */ +} + +static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + + /* + * 1-Bit errors are automatically corrected in HW. No need for + * additional correction. 2-Bit errors cannot be corrected by + * HW ECC, so we need to return failure + */ + uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result); + + if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { + MTDDEBUG(MTD_DEBUG_LEVEL0, + "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n"); + return -1; + } + + return 0; +} + +static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + return 0; +} +#endif + +static u_char mxc_nand_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + uint8_t ret = 0; + uint16_t col; + uint16_t __iomem *main_buf = + (uint16_t __iomem *)host->regs->main_area0; + uint16_t __iomem *spare_buf = + (uint16_t __iomem *)host->regs->spare_area0; + union { + uint16_t word; + uint8_t bytes[2]; + } nfc_word; + + /* Check for status request */ + if (host->status_request) + return get_dev_status(host) & 0xFF; + + /* Get column for 16-bit access */ + col = host->col_addr >> 1; + + /* If we are accessing the spare region */ + if (host->spare_only) + nfc_word.word = readw(&spare_buf[col]); + else + nfc_word.word = readw(&main_buf[col]); + + /* Pick upper/lower byte of word from RAM buffer */ + ret = nfc_word.bytes[host->col_addr & 0x1]; + + /* Update saved column address */ + if (nand_chip->options & NAND_BUSWIDTH_16) + host->col_addr += 2; + else + host->col_addr++; + + return ret; +} + +static uint16_t mxc_nand_read_word(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + uint16_t col, ret; + uint16_t __iomem *p; + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "mxc_nand_read_word(col = %d)\n", host->col_addr); + + col = host->col_addr; + /* Adjust saved column address */ + if (col < mtd->writesize && host->spare_only) + col += mtd->writesize; + + if (col < mtd->writesize) { + p = (uint16_t __iomem *)(host->regs->main_area0 + (col >> 1)); + } else { + p = (uint16_t __iomem *)(host->regs->spare_area0 + + ((col - mtd->writesize) >> 1)); + } + + if (col & 1) { + union { + uint16_t word; + uint8_t bytes[2]; + } nfc_word[3]; + + nfc_word[0].word = readw(p); + nfc_word[1].word = readw(p + 1); + + nfc_word[2].bytes[0] = nfc_word[0].bytes[1]; + nfc_word[2].bytes[1] = nfc_word[1].bytes[0]; + + ret = nfc_word[2].word; + } else { + ret = readw(p); + } + + /* Update saved column address */ + host->col_addr = col + 2; + + return ret; +} + +/* + * Write data of length len to buffer buf. The data to be + * written on NAND Flash is first copied to RAMbuffer. After the Data Input + * Operation by the NFC, the data is written to NAND Flash + */ +static void mxc_nand_write_buf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + int n, col, i = 0; + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr, + len); + + col = host->col_addr; + + /* Adjust saved column address */ + if (col < mtd->writesize && host->spare_only) + col += mtd->writesize; + + n = mtd->writesize + mtd->oobsize - col; + n = min(len, n); + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n); + + while (n > 0) { + void __iomem *p; + + if (col < mtd->writesize) { + p = host->regs->main_area0 + (col & ~3); + } else { + p = host->regs->spare_area0 - + mtd->writesize + (col & ~3); + } + + MTDDEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__, + __LINE__, p); + + if (((col | (unsigned long)&buf[i]) & 3) || n < 4) { + union { + uint32_t word; + uint8_t bytes[4]; + } nfc_word; + + nfc_word.word = readl(p); + nfc_word.bytes[col & 3] = buf[i++]; + n--; + col++; + + writel(nfc_word.word, p); + } else { + int m = mtd->writesize - col; + + if (col >= mtd->writesize) + m += mtd->oobsize; + + m = min(n, m) & ~3; + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "%s:%d: n = %d, m = %d, i = %d, col = %d\n", + __func__, __LINE__, n, m, i, col); + + mxc_nand_memcpy32(p, (uint32_t *)&buf[i], m); + col += m; + i += m; + n -= m; + } + } + /* Update saved column address */ + host->col_addr = col; +} + +/* + * Read the data buffer from the NAND Flash. To read the data from NAND + * Flash first the data output cycle is initiated by the NFC, which copies + * the data to RAMbuffer. This data of length len is then copied to buffer buf. + */ +static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + int n, col, i = 0; + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len); + + col = host->col_addr; + + /* Adjust saved column address */ + if (col < mtd->writesize && host->spare_only) + col += mtd->writesize; + + n = mtd->writesize + mtd->oobsize - col; + n = min(len, n); + + while (n > 0) { + void __iomem *p; + + if (col < mtd->writesize) { + p = host->regs->main_area0 + (col & ~3); + } else { + p = host->regs->spare_area0 - + mtd->writesize + (col & ~3); + } + + if (((col | (int)&buf[i]) & 3) || n < 4) { + union { + uint32_t word; + uint8_t bytes[4]; + } nfc_word; + + nfc_word.word = readl(p); + buf[i++] = nfc_word.bytes[col & 3]; + n--; + col++; + } else { + int m = mtd->writesize - col; + + if (col >= mtd->writesize) + m += mtd->oobsize; + + m = min(n, m) & ~3; + mxc_nand_memcpy32((uint32_t *)&buf[i], p, m); + + col += m; + i += m; + n -= m; + } + } + /* Update saved column address */ + host->col_addr = col; +} + +/* + * Used by the upper layer to verify the data in NAND Flash + * with the data in the buf. + */ +static int mxc_nand_verify_buf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + u_char tmp[256]; + uint bsize; + + while (len) { + bsize = min(len, 256); + mxc_nand_read_buf(mtd, tmp, bsize); + + if (memcmp(buf, tmp, bsize)) + return 1; + + buf += bsize; + len -= bsize; + } + + return 0; +} + +/* + * This function is used by upper layer for select and + * deselect of the NAND chip + */ +static void mxc_nand_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + + switch (chip) { + case -1: + /* TODO: Disable the NFC clock */ + if (host->clk_act) + host->clk_act = 0; + break; + case 0: + /* TODO: Enable the NFC clock */ + if (!host->clk_act) + host->clk_act = 1; + break; + + default: + break; + } +} + +/* + * Used by the upper layer to write command to NAND Flash for + * different operations to be carried out on NAND Flash + */ +static void mxc_nand_command(struct mtd_info *mtd, unsigned command, + int column, int page_addr) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + + MTDDEBUG(MTD_DEBUG_LEVEL3, + "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n", + command, column, page_addr); + + /* Reset command state information */ + host->status_request = false; + + /* Command pre-processing step */ + switch (command) { + + case NAND_CMD_STATUS: + host->col_addr = 0; + host->status_request = true; + break; + + case NAND_CMD_READ0: + host->col_addr = column; + host->spare_only = false; + break; + + case NAND_CMD_READOOB: + host->col_addr = column; + host->spare_only = true; + if (host->pagesize_2k) + command = NAND_CMD_READ0; /* only READ0 is valid */ + break; + + case NAND_CMD_SEQIN: + if (column >= mtd->writesize) { + /* + * before sending SEQIN command for partial write, + * we need read one page out. FSL NFC does not support + * partial write. It alway send out 512+ecc+512+ecc ... + * for large page nand flash. But for small page nand + * flash, it does support SPARE ONLY operation. + */ + if (host->pagesize_2k) { + /* call ourself to read a page */ + mxc_nand_command(mtd, NAND_CMD_READ0, 0, + page_addr); + } + + host->col_addr = column - mtd->writesize; + host->spare_only = true; + + /* Set program pointer to spare region */ + if (!host->pagesize_2k) + send_cmd(host, NAND_CMD_READOOB); + } else { + host->spare_only = false; + host->col_addr = column; + + /* Set program pointer to page start */ + if (!host->pagesize_2k) + send_cmd(host, NAND_CMD_READ0); + } + break; + + case NAND_CMD_PAGEPROG: + send_prog_page(host, 0, host->spare_only); + + if (host->pagesize_2k) { + /* data in 4 areas datas */ + send_prog_page(host, 1, host->spare_only); + send_prog_page(host, 2, host->spare_only); + send_prog_page(host, 3, host->spare_only); + } + + break; + } + + /* Write out the command to the device. */ + send_cmd(host, command); + + /* Write out column address, if necessary */ + if (column != -1) { + /* + * MXC NANDFC can only perform full page+spare or + * spare-only read/write. When the upper layers + * layers perform a read/write buf operation, + * we will used the saved column adress to index into + * the full page. + */ + send_addr(host, 0); + if (host->pagesize_2k) + /* another col addr cycle for 2k page */ + send_addr(host, 0); + } + + /* Write out page address, if necessary */ + if (page_addr != -1) { + /* paddr_0 - p_addr_7 */ + send_addr(host, (page_addr & 0xff)); + + if (host->pagesize_2k) { + send_addr(host, (page_addr >> 8) & 0xFF); + if (mtd->size >= 0x10000000) { + /* paddr_8 - paddr_15 */ + send_addr(host, (page_addr >> 8) & 0xff); + send_addr(host, (page_addr >> 16) & 0xff); + } else { + /* paddr_8 - paddr_15 */ + send_addr(host, (page_addr >> 8) & 0xff); + } + } else { + /* One more address cycle for higher density devices */ + if (mtd->size >= 0x4000000) { + /* paddr_8 - paddr_15 */ + send_addr(host, (page_addr >> 8) & 0xff); + send_addr(host, (page_addr >> 16) & 0xff); + } else { + /* paddr_8 - paddr_15 */ + send_addr(host, (page_addr >> 8) & 0xff); + } + } + } + + /* Command post-processing step */ + switch (command) { + + case NAND_CMD_RESET: + break; + + case NAND_CMD_READOOB: + case NAND_CMD_READ0: + if (host->pagesize_2k) { + /* send read confirm command */ + send_cmd(host, NAND_CMD_READSTART); + /* read for each AREA */ + send_read_page(host, 0, host->spare_only); + send_read_page(host, 1, host->spare_only); + send_read_page(host, 2, host->spare_only); + send_read_page(host, 3, host->spare_only); + } else { + send_read_page(host, 0, host->spare_only); + } + break; + + case NAND_CMD_READID: + host->col_addr = 0; + send_read_id(host); + break; + + case NAND_CMD_PAGEPROG: + break; + + case NAND_CMD_STATUS: + break; + + case NAND_CMD_ERASE2: + break; + } +} + +int board_nand_init(struct nand_chip *this) +{ + struct system_control_regs *sc_regs = + (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; + struct mtd_info *mtd; + uint16_t tmp; + int err = 0; + + /* structures must be linked */ + mtd = &host->mtd; + mtd->priv = this; + host->nand = this; + + /* 5 us command delay time */ + this->chip_delay = 5; + + this->priv = host; + this->dev_ready = mxc_nand_dev_ready; + this->cmdfunc = mxc_nand_command; + this->select_chip = mxc_nand_select_chip; + this->read_byte = mxc_nand_read_byte; + this->read_word = mxc_nand_read_word; + this->write_buf = mxc_nand_write_buf; + this->read_buf = mxc_nand_read_buf; + this->verify_buf = mxc_nand_verify_buf; + + host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; + host->clk_act = 1; + +#ifdef CONFIG_MXC_NAND_HWECC + this->ecc.calculate = mxc_nand_calculate_ecc; + this->ecc.hwctl = mxc_nand_enable_hwecc; + this->ecc.correct = mxc_nand_correct_data; + this->ecc.mode = NAND_ECC_HW; + this->ecc.size = 512; + this->ecc.bytes = 3; + this->ecc.layout = &nand_hw_eccoob; + tmp = readw(&host->regs->nfc_config1); + tmp |= NFC_ECC_EN; + writew(tmp, &host->regs->nfc_config1); +#else + this->ecc.layout = &nand_soft_eccoob; + this->ecc.mode = NAND_ECC_SOFT; + tmp = readw(&host->regs->nfc_config1); + tmp &= ~NFC_ECC_EN; + writew(tmp, &host->regs->nfc_config1); +#endif + + /* Reset NAND */ + this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + + /* + * preset operation + * Unlock the internal RAM Buffer + */ + writew(0x2, &host->regs->nfc_config); + + /* Blocks to be unlocked */ + writew(0x0, &host->regs->nfc_unlockstart_blkaddr); + writew(0x4000, &host->regs->nfc_unlockend_blkaddr); + + /* Unlock Block Command for given address range */ + writew(0x4, &host->regs->nfc_wrprot); + + /* NAND bus width determines access funtions used by upper layer */ + if (readl(&sc_regs->fmcr) & NF_16BIT_SEL) + this->options |= NAND_BUSWIDTH_16; + + host->pagesize_2k = 0; + + return err; +} |