aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/s3c64xx.c295
-rw-r--r--drivers/mtd/onenand/onenand_base.c4
-rw-r--r--drivers/mtd/onenand/samsung.c60
4 files changed, 4 insertions, 356 deletions
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index bcb71619b58..35769c5ea3f 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -73,7 +73,6 @@ COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o
COBJS-$(CONFIG_NAND_NDFC) += ndfc.o
COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
-COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o
COBJS-$(CONFIG_NAND_SPEAR) += spr_nand.o
COBJS-$(CONFIG_TEGRA_NAND) += tegra_nand.o
COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c
deleted file mode 100644
index 87f03410666..00000000000
--- a/drivers/mtd/nand/s3c64xx.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * (C) Copyright 2006 DENX Software Engineering
- *
- * Implementation for U-Boot 1.1.6 by Samsung
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <nand.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/arch/s3c6400.h>
-
-#include <asm/io.h>
-#include <asm/errno.h>
-
-#define MAX_CHIPS 2
-static int nand_cs[MAX_CHIPS] = {0, 1};
-
-#ifdef CONFIG_NAND_SPL
-#define printf(arg...) do {} while (0)
-#endif
-
-/* Nand flash definition values by jsgood */
-#ifdef S3C_NAND_DEBUG
-/*
- * Function to print out oob buffer for debugging
- * Written by jsgood
- */
-static void print_oob(const char *header, struct mtd_info *mtd)
-{
- int i;
- struct nand_chip *chip = mtd->priv;
-
- printf("%s:\t", header);
-
- for (i = 0; i < 64; i++)
- printf("%02x ", chip->oob_poi[i]);
-
- printf("\n");
-}
-#endif /* S3C_NAND_DEBUG */
-
-static void s3c_nand_select_chip(struct mtd_info *mtd, int chip)
-{
- int ctrl = readl(NFCONT);
-
- switch (chip) {
- case -1:
- ctrl |= 6;
- break;
- case 0:
- ctrl &= ~2;
- break;
- case 1:
- ctrl &= ~4;
- break;
- default:
- return;
- }
-
- writel(ctrl, NFCONT);
-}
-
-/*
- * Hardware specific access to control-lines function
- * Written by jsgood
- */
-static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_CLE)
- this->IO_ADDR_W = (void __iomem *)NFCMMD;
- else if (ctrl & NAND_ALE)
- this->IO_ADDR_W = (void __iomem *)NFADDR;
- else
- this->IO_ADDR_W = (void __iomem *)NFDATA;
- if (ctrl & NAND_NCE)
- s3c_nand_select_chip(mtd, *(int *)this->priv);
- else
- s3c_nand_select_chip(mtd, -1);
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-/*
- * Function for checking device ready pin
- * Written by jsgood
- */
-static int s3c_nand_device_ready(struct mtd_info *mtdinfo)
-{
- return !!(readl(NFSTAT) & NFSTAT_RnB);
-}
-
-#ifdef CONFIG_SYS_S3C_NAND_HWECC
-/*
- * This function is called before encoding ecc codes to ready ecc engine.
- * Written by jsgood
- */
-static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode)
-{
- u_long nfcont, nfconf;
-
- /*
- * The original driver used 4-bit ECC for "new" MLC chips, i.e., for
- * those with non-zero ID[3][3:2], which anyway only holds for ST
- * (Numonyx) chips
- */
- nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT;
-
- writel(nfconf, NFCONF);
-
- /* Initialize & unlock */
- nfcont = readl(NFCONT);
- nfcont |= NFCONT_INITECC;
- nfcont &= ~NFCONT_MECCLOCK;
-
- if (mode == NAND_ECC_WRITE)
- nfcont |= NFCONT_ECC_ENC;
- else if (mode == NAND_ECC_READ)
- nfcont &= ~NFCONT_ECC_ENC;
-
- writel(nfcont, NFCONT);
-}
-
-/*
- * This function is called immediately after encoding ecc codes.
- * This function returns encoded ecc codes.
- * Written by jsgood
- */
-static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
- u_char *ecc_code)
-{
- u_long nfcont, nfmecc0;
-
- /* Lock */
- nfcont = readl(NFCONT);
- nfcont |= NFCONT_MECCLOCK;
- writel(nfcont, NFCONT);
-
- nfmecc0 = readl(NFMECC0);
-
- ecc_code[0] = nfmecc0 & 0xff;
- ecc_code[1] = (nfmecc0 >> 8) & 0xff;
- ecc_code[2] = (nfmecc0 >> 16) & 0xff;
- ecc_code[3] = (nfmecc0 >> 24) & 0xff;
-
- return 0;
-}
-
-/*
- * This function determines whether read data is good or not.
- * If SLC, must write ecc codes to controller before reading status bit.
- * If MLC, status bit is already set, so only reading is needed.
- * If status bit is good, return 0.
- * If correctable errors occured, do that.
- * If uncorrectable errors occured, return -1.
- * Written by jsgood
- */
-static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc)
-{
- int ret = -1;
- u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr;
- u_char err_type, repaired;
-
- /* SLC: Write ecc to compare */
- nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0];
- nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2];
- writel(nfmeccdata0, NFMECCDATA0);
- writel(nfmeccdata1, NFMECCDATA1);
-
- /* Read ecc status */
- nfestat0 = readl(NFESTAT0);
- err_type = nfestat0 & 0x3;
-
- switch (err_type) {
- case 0: /* No error */
- ret = 0;
- break;
-
- case 1:
- /*
- * 1 bit error (Correctable)
- * (nfestat0 >> 7) & 0x7ff :error byte number
- * (nfestat0 >> 4) & 0x7 :error bit number
- */
- err_byte_addr = (nfestat0 >> 7) & 0x7ff;
- repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7));
-
- printf("S3C NAND: 1 bit error detected at byte %ld. "
- "Correcting from 0x%02x to 0x%02x...OK\n",
- err_byte_addr, dat[err_byte_addr], repaired);
-
- dat[err_byte_addr] = repaired;
-
- ret = 1;
- break;
-
- case 2: /* Multiple error */
- case 3: /* ECC area error */
- printf("S3C NAND: ECC uncorrectable error detected. "
- "Not correctable.\n");
- ret = -1;
- break;
- }
-
- return ret;
-}
-#endif /* CONFIG_SYS_S3C_NAND_HWECC */
-
-/*
- * Board-specific NAND initialization. The following members of the
- * argument are board-specific (per include/linux/mtd/nand.h):
- * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
- * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - hwcontrol: hardwarespecific function for accesing control-lines
- * - dev_ready: hardwarespecific function for accesing device ready/busy line
- * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
- * only be provided if a hardware ECC is available
- * - eccmode: mode of ecc, see defines
- * - chip_delay: chip dependent delay for transfering data from array to
- * read regs (tR)
- * - options: various chip options. They can partly be set to inform
- * nand_scan about special functionality. See the defines for further
- * explanation
- * Members with a "?" were not set in the merged testing-NAND branch,
- * so they are not set here either.
- */
-int board_nand_init(struct nand_chip *nand)
-{
- static int chip_n;
-
- if (chip_n >= MAX_CHIPS)
- return -ENODEV;
-
- NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6;
-
- nand->IO_ADDR_R = (void __iomem *)NFDATA;
- nand->IO_ADDR_W = (void __iomem *)NFDATA;
- nand->cmd_ctrl = s3c_nand_hwcontrol;
- nand->dev_ready = s3c_nand_device_ready;
- nand->select_chip = s3c_nand_select_chip;
- nand->options = 0;
-#ifdef CONFIG_NAND_SPL
- nand->read_byte = nand_read_byte;
- nand->write_buf = nand_write_buf;
- nand->read_buf = nand_read_buf;
-#endif
-
-#ifdef CONFIG_SYS_S3C_NAND_HWECC
- nand->ecc.hwctl = s3c_nand_enable_hwecc;
- nand->ecc.calculate = s3c_nand_calculate_ecc;
- nand->ecc.correct = s3c_nand_correct_data;
-
- /*
- * If you get more than 1 NAND-chip with different page-sizes on the
- * board one day, it will get more complicated...
- */
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
- nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
-#else
- nand->ecc.mode = NAND_ECC_SOFT;
-#endif /* ! CONFIG_SYS_S3C_NAND_HWECC */
-
- nand->priv = nand_cs + chip_n++;
-
- return 0;
-}
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 1a7b40eaa37..858e322743b 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -632,10 +632,6 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
int blockpage, found = 0;
unsigned int i;
-#ifdef CONFIG_S3C64XX
- return 0;
-#endif
-
if (ONENAND_IS_2PLANE(this))
blockpage = onenand_get_2x_blockpage(mtd, addr);
else
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 0d94ea5b1f3..5eb2b3a4241 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -1,5 +1,5 @@
/*
- * S3C64XX/S5PC100 OneNAND driver at U-Boot
+ * S5PC100 OneNAND driver at U-Boot
*
* Copyright (C) 2008-2009 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
@@ -62,12 +62,7 @@ do { \
#define ONENAND_MAIN_SPARE_ACCESS 0x16
#define ONENAND_PIPELINE_READ 0x4000
-#if defined(CONFIG_S3C64XX)
-#define MAP_00 (0x0 << 24)
-#define MAP_01 (0x1 << 24)
-#define MAP_10 (0x2 << 24)
-#define MAP_11 (0x3 << 24)
-#elif defined(CONFIG_S5P)
+#if defined(CONFIG_S5P)
#define MAP_00 (0x0 << 26)
#define MAP_01 (0x1 << 26)
#define MAP_10 (0x2 << 26)
@@ -116,12 +111,7 @@ static void s3c_write_cmd(int value, unsigned int cmd)
* return the buffer address on the memory device
* It will be combined with CMD_MAP_XX
*/
-#if defined(CONFIG_S3C64XX)
-static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
-{
- return (fba << 12) | (fpa << 6) | (fsa << 4);
-}
-#elif defined(CONFIG_S5P)
+#if defined(CONFIG_S5P)
static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
{
return (fba << 13) | (fpa << 7) | (fsa << 5);
@@ -550,45 +540,6 @@ static void s3c_onenand_unlock_all(struct mtd_info *mtd)
s3c_onenand_check_lock_status(mtd);
}
-#ifdef CONFIG_S3C64XX
-static void s3c_set_width_regs(struct onenand_chip *this)
-{
- int dev_id, density;
- int fba, fpa, fsa;
- int dbs_dfs;
-
- dev_id = DEVICE_ID0_REG;
-
- density = (dev_id >> ONENAND_DEVICE_DENSITY_SHIFT) & 0xf;
- dbs_dfs = !!(dev_id & ONENAND_DEVICE_IS_DDP);
-
- fba = density + 7;
- if (dbs_dfs)
- fba--; /* Decrease the fba */
- fpa = 6;
- if (density >= ONENAND_DEVICE_DENSITY_512Mb)
- fsa = 2;
- else
- fsa = 1;
-
- DPRINTK("FBA %lu, FPA %lu, FSA %lu, DDP %lu",
- FBA_WIDTH0_REG, FPA_WIDTH0_REG, FSA_WIDTH0_REG,
- DDP_DEVICE_REG);
-
- DPRINTK("mem_cfg0 0x%lx, sync mode %lu, "
- "dev_page_size %lu, BURST LEN %lu",
- MEM_CFG0_REG, SYNC_MODE_REG,
- DEV_PAGE_SIZE_REG, BURST_LEN0_REG);
-
- DEV_PAGE_SIZE_REG = 0x1;
-
- FBA_WIDTH0_REG = fba;
- FPA_WIDTH0_REG = fpa;
- FSA_WIDTH0_REG = fsa;
- DBS_DFS_WIDTH0_REG = dbs_dfs;
-}
-#endif
-
int s5pc110_chip_probe(struct mtd_info *mtd)
{
return 0;
@@ -620,10 +571,7 @@ void s3c_onenand_init(struct mtd_info *mtd)
onenand->mtd = mtd;
-#if defined(CONFIG_S3C64XX)
- onenand->base = (void *)0x70100000;
- onenand->ahb_addr = (void *)0x20000000;
-#elif defined(CONFIG_S5P)
+#if defined(CONFIG_S5P)
onenand->base = (void *)0xE7100000;
onenand->ahb_addr = (void *)0xB0000000;
#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 09:22:03 +0000